Intel 2860QM manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98

Ir a la página of

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Intel 2860QM. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Intel 2860QM o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Intel 2860QM se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Intel 2860QM, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones Intel 2860QM debe contener:
- información acerca de las especificaciones técnicas del dispositivo Intel 2860QM
- nombre de fabricante y año de fabricación del dispositivo Intel 2860QM
- condiciones de uso, configuración y mantenimiento del dispositivo Intel 2860QM
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Intel 2860QM no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Intel 2860QM y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Intel en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Intel 2860QM, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Intel 2860QM, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Intel 2860QM. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

    Document Number: 320835 -003 Intel ® Core™ i7-900 Desktop Processor Extreme Edition Series and Intel ® Core™ i7-900 Desktop Processor Series Datasheet, Volume 2 October 2009[...]

  • Página 2

    2 Datasheet INFORMA TION IN THIS DOCUMENT IS PROVIDED IN CONNE CTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR O THERWISE, TO ANY INTELLECTUAL PROPER TY RIGHTS IS GRANTED BY THIS DOCUMENT . EXCEPT AS PROVIDED IN INTEL 'S TERMS AND CONDIT IONS OF SALE FOR SUCH PRODUCTS, IN TEL ASSUMES NO LIABILITY W HA TSOEVER, AND I[...]

  • Página 3

    Datasheet 3 Contents 1I n t r o d u c t i o n ....... ........... ........ ........... ........ ........... ........ ........... ........ ........ ........... ...... 11 1.1 Terminology ......... .......... ......... .......... ........ ........... ........ ........... ........ ......... ........ 11 1.1.1 Processor Terminology . .......... .........[...]

  • Página 4

    4 Datasheet 2.9.2 TA D_INTERLEAVE_ LIST_0, TAD_INTERLEAVE_L IST_1 TAD_INTERLEAVE_LIST_2, TAD_INTERLEAVE_LIST_ 3 TAD_INTERLEAVE_LIST_4, TAD_INTERLEAVE_LIST_ 5 TAD_INTERL EAVE_LIST_ 6, TAD_INTERLE AVE_LIST_7 ........... ........... ..........58 2.10 Integrated Memory Controller Channel Control Registers .......... .......... ........... ..........59 [...]

  • Página 5

    Datasheet 5 2.10.19 MC_CHANNEL_0_ODT_MATRIX_RANK_0_3_ RD MC_CHANNEL_1_ODT_MATRIX_RANK_0_3_ RD MC_CHANNEL_2_ODT_MATRIX_RANK_ 0_3_RD....... ................... ............... 73 2.10.20 MC_CHANNEL_0_ODT_MATRIX_RANK_4_7_ RD MC_CHANNEL_1_ODT_MATRIX_RANK_4_7_ RD MC_CHANNEL_2_ODT_MATRIX_RANK_ 4_7_RD....... ................... ............... 74 2.10.21 [...]

  • Página 6

    6 Datasheet 2.10.39 Error Injection Imple mentation ..................... ........... .......... ........... ..........83 2.11 Integrated Memory Controller Channel Address Registers ........... .......... ........... ........84 2.11.1 MC_DOD_CH0_0, MC_DOD_CH0_1, MC_DOD _CH0_2 .............. ......... ......... 84 2.11.2 MC_DOD_CH1_0, MC_DOD_CH1_1, [...]

  • Página 7

    Datasheet 7 MC_RIR_WAY_CH2_6, MC_RIR_WAY_ CH2_7 MC_RIR_WAY_CH2_8, MC_RIR_WAY_ CH2_9 MC_RIR_WAY_CH2_10, M C_RIR_WAY_CH2_11 MC_RIR_WAY_CH2_12, M C_RIR_WAY_CH2_13 MC_RIR_WAY_CH2_14, M C_RIR_WAY_CH2_15 MC_RIR_WAY_CH2_16, M C_RIR_WAY_CH2_17 MC_RIR_WAY_CH2_18, M C_RIR_WAY_CH2_19 MC_RIR_WAY_CH2_20, M C_RIR_WAY_CH2_21 MC_RIR_WAY_CH2_22, M C_RIR_WAY_CH2_23 [...]

  • Página 8

    8 Datasheet Tables 1-1 Reference s................ ........ ........... ........ ........ ........... ........ ........... ........ ........... .... 13 2-1 Functions Specifically Handled by the Processor ............. ........... ........ ........... ........ .. 17 2-2 Device 0, Function 0: Generic Non-core Register s .......... ......... .........[...]

  • Página 9

    Datasheet 9 Revision History Revision Number Descriptio n Date -001 • Initial release. November 2008 -002 • Updated section 2.2 and T able 2.3. November 2008 -003 • Updated document title and In troduction chapte r October 2009[...]

  • Página 10

    10 Datasheet[...]

  • Página 11

    Datasheet 11 Introduction 1 Introduction The Intel ® Core™ i7-900 desktop processor Extreme Edition series and Intel ® Core™ i7-900 desktop processor series are intended for high performance high-end desktop, Uni-processor (UP) server , and workstatio n systems. The processor implements k ey new technologies: • Integrated Memory Controller [...]

  • Página 12

    Introduction 12 Datasheet security of the system. See the Intel Architecture Software Developer's Manual for more detailed information. Refer to h ttp://developer .intel.com/ for future reference on up to date nomenclatures. • Eye Definitions — The eye at any point along the data channel is defined to be the creation of over lapping of a l[...]

  • Página 13

    Datasheet 13 Introduction • Unit Interval (UI) — Signaling convention that is binary and unidirectional. In this binary signaling, one bit is sent for every edge of the forwarded clock, whe ther it be a rising edge or a falling edge. If a number of edges are collected at instances t 1 , t 2 , t n ,.... , t k then the UI at instance “n” is d[...]

  • Página 14

    Introduction 14 Datasheet[...]

  • Página 15

    Datasheet 15 Register Description 2 Register Description The processor supports PCI configuration space accesses using the mechanism denoted as Configuration Mechanism in the PC I specification as defined in the PCI Local Bus Specification, Revision 2.3, as well as the PCI Express* enhanced configur ation mechanism as specified in the PCI Express B[...]

  • Página 16

    Register Description 16 Datasheet 2.2 Platform Configuration Structure The processor contains 6 PCI devices within a single physical component. The configuration registers for these devices are mapped as devices residing on the PCI bus assigned for the processor socket. Bus number is deriv ed by the max bus range setting and processor socket number[...]

  • Página 17

    Datasheet 17 Register Description at DID of 2C22h. Devic e 4, Function 3 contains the thermal control registers for Integrated Memory Controller Channel 0 and resides at DID of 2C23h. • Device 5: Integrated Memory Controller Channel 1. Device 5, Function 0 contains the control registers for Integrated Memory Controller Channel 1 and resides at DI[...]

  • Página 18

    Register Description 18 Datasheet 2.4 Detailed Configuration Space Maps Table 2-2. Device 0, Function 0: Generic Non-core Register s DID VID 00h 80h PCISTS PCICMD 04h 84h CCR RID 08h 88h HDR 0Ch 8Ch 10h 90h 14h 94h 18h 98h 1Ch 9Ch 20h A0h 24h A4h 28h A8h SID SVID 2Ch ACh 30h B0h 34h B4h 38h B8h 3Ch BCh 40h C0h 44h C4h 48h C8h 4Ch CC h 50h D0h 54h D[...]

  • Página 19

    Datasheet 19 Register Description Table 2-3. Device 0, Func tion 1: System Address De coder Registers DID VID 00h SAD_DRAM_RULE_0 80h PCISTS PCICMD 04h SAD_DRAM_RULE_1 84h CCR RID 08h SAD_DRAM_RULE_2 88h HDR 0Ch SAD_DRAM_RULE_3 8Ch 10h SAD_DRAM_RULE_4 90h 14h SAD_DRAM_RULE_5 94h 18h SAD_DRAM_RULE_6 98h 1Ch SAD_DRAM_RULE_7 9C h 20h A0h 24h A4h 28h A[...]

  • Página 20

    Register Description 20 Datasheet Table 2-4. Device 2, Function 0: Intel QPI Link 0 Re gisters DID VID 00h 80h PCISTS PCICMD 04h 84h CCR RID 08h 88h HDR 0Ch 8Ch 10h 90h 14h 94h 18h 98h 1Ch 9Ch 20h A0h 24h A4h 28h A8h SID SVID 2Ch ACh 30h B0h 34h B4h 38h B8h 3Ch BCh 40h C0h 44h C4h QPI_QPILCL_L0 48h C8h 4Ch CCh 50h D0h 54h D4h 58h D8h 5Ch DCh 60h E0[...]

  • Página 21

    Datasheet 21 Register Description Table 2-5. Device 2, Function 1: Intel QPI Physical 0 Registers DID VID 00h 80h PCISTS PCICMD 0 4h 84h CCR RID 08h 88h HDR 0Ch 8Ch 10h 90h 14h 94h 18h 98h 1Ch 9Ch 20h A0h 24h A4h 28h A8h SID SVID 2Ch ACh 30h B0h 34h B4h 38h B8h 3Ch BCh 40h C0h 44h C4h 48h C8h 4Ch CCh 50h D0h 54h D4h 58h D8h 5Ch DCh 60h E0h 64h E4h [...]

  • Página 22

    Register Description 22 Datasheet Table 2-6. Device 3, Function 0: Inte grated Memory Controller Registers DID VID 00h 80h PCISTS PCICMD 04h 84h CCR RID 08h 88h HDR 0Ch 8Ch 10h 90h 14h 94h 18h 98h 1Ch 9Ch 20h A0h 24h A4h 28h A8h SID SVID 2Ch ACh 30h B0h 34h B4h 38h B8h 3Ch BCh 40h C0h 44h C4h MC_CONTROL 48h C8h MC_ST A TUS 4Ch CCh MC_SMI_SPARE_DIMM[...]

  • Página 23

    Datasheet 23 Register Description Table 2-7. Device 3, Func tion 1: Target Address Decoder Registers DID VID 00h T AD_DRAM_RULE_0 80h PCISTS PCICMD 04h T AD_DRAM_RULE_1 84h CCR RID 08h T AD_DRAM_RULE_2 88h HDR 0Ch T AD_DRAM_RULE_3 8Ch 10h T A D_DRAM_RULE_4 90h 14h T A D_DRAM_RULE_5 94h 18h T A D_DRAM_RULE_6 98h 1Ch TAD _DRAM_RULE_7 9Ch 20h A0h 24h [...]

  • Página 24

    Register Description 24 Datasheet Table 2-8. Device 4, Function 0: Inte grated Memory Cont roller Channel 0 Control Registers DID VID 00h MC_CHANNEL_0_RANK_TIMING_A 80h PCISTS PCICMD 04h MC_CHANNEL_0_RANK_TIMING_B 84h CCR RID 08h MC_CHANNEL_0_BANK_TIMING 88h HDR 0Ch MC_CHANNEL_0_REFRESH_TIMING 8Ch 10h MC_CHANNEL_0_CKE_TIMING 90h 14h MC_CHANNEL_0_ZQ[...]

  • Página 25

    Datasheet 25 Register Description Table 2-9. De vice 4, Func tion 1: Integ rated Memory C ontrolle r Channel 0 Address Registers DID VID 00h MC_SAG_CH0_0 80h PCISTS PCICMD 04h MC_SAG_CH0_1 84h CCR RID 08h MC_SAG_CH0_2 88h HDR 0Ch MC_SAG_CH0_3 8Ch 10h MC_SAG_CH0_4 90h 14h MC_SAG_CH0_5 94h 18h MC_SAG_CH0_6 98h 1Ch MC_SAG_ CH0_7 9Ch 20h A0h 24h A4h 28[...]

  • Página 26

    Register Description 26 Datasheet Table 2-10. D evice 4, Function 2: Inte grated Memory Cont roller Channel 0 Rank Registers DID VID 00h MC_RIR_WA Y_CH0_0 80h PCISTS PCICMD 04h MC_RIR_WA Y_CH0_1 84h CCR RID 08h MC_RIR_WA Y_CH0_2 88h HDR 0Ch MC_RIR_W A Y_CH0_3 8Ch 10h MC_RIR_WA Y_CH0_4 90h 14h MC_RIR_WA Y_CH0_5 94h 18h MC_RIR_WA Y_CH0_6 98h 1Ch MC_R[...]

  • Página 27

    Datasheet 27 Register Description Table 2-11. Device 4, Fun ction 3: Inte g rated Memory Controller Channel 0 Thermal Control Registers DID VID 00h MC_COOLING_COEF0 80h PCISTS PCICMD 04h MC_CLOSED_LOOP0 84h CCR RID 08h MC_THROT TLE_OFFSET0 88h HDR 0Ch 8Ch 10h 90h 14h 94h 18h MC_RANK_VIRT UAL_TEMP0 98h 1Ch MC_DDR_THERM_COMMAND0 9Ch 20h A0h 24h MC_DD[...]

  • Página 28

    Register Description 28 Datasheet Table 2-12. D evice 5, Function 0: Inte grated Memory Cont roller Channel 1 Control Registers DID VID 00h MC_CHANNEL_1_RANK_TIMING_A 80h PCISTS PCICMD 04h MC_CHANNEL_1_RANK_TIMING_B 84h CCR RID 08h MC_CHANNEL_1_BANK_TIMING 88h HDR 0Ch MC_CHANNEL_1_REFRESH_TIMING 8Ch 10h MC_CHANNEL_1_CKE_TIMING 90h 14h MC_CHANNEL_1_[...]

  • Página 29

    Datasheet 29 Register Description Table 2-13. Device 5, Fun ction 1: Inte g rated Memory Controller Channel 1 Address Registers DID VID 00h MC_SAG_CH1_0 80h PCISTS PCICMD 04h MC_SAG_CH1_1 84h CCR RID 08h MC_SAG_CH1_2 88h HDR 0Ch MC_SAG_CH1_3 8Ch 10h MC_SAG_CH1_4 90h 14h MC_SAG_CH1_5 94h 18h MC_SAG_CH1_6 98h 1Ch MC_SAG_ CH1_7 9Ch 20h A0h 24h A4h 28h[...]

  • Página 30

    Register Description 30 Datasheet Table 2-14. D evice 5, Function 2: Inte grated Memory Cont roller Channel 1 Rank Registers DID VID 00h MC_RIR_WA Y_CH1_0 80h PCISTS PCICMD 04h MC_RIR_WA Y_CH1_1 84h CCR RID 08h MC_RIR_WA Y_CH1_2 88h HDR 0Ch MC_RIR_W A Y_CH1_3 8Ch 10h MC_RIR_WA Y_CH1_4 90h 14h MC_RIR_WA Y_CH1_5 94h 18h MC_RIR_WA Y_CH1_6 98h 1Ch MC_R[...]

  • Página 31

    Datasheet 31 Register Description Table 2-15. Device 5, Fun ction 3: Inte g rated Memory Controller Channel 1 Thermal Control Registers DID VID 00h MC_COOLING_COEF1 80h PCISTS PCICMD 04h MC_CLOSED_LOOP1 84h CCR RID 08h MC_THROT TLE_OFFSET1 88h HDR 0Ch 8Ch 10h 90h 14h 94h 18h MC_RANK_VIRT UAL_TEMP1 98h 1Ch MC_DDR_THERM_COMMAND1 9Ch 20h A0h 24h MC_DD[...]

  • Página 32

    Register Description 32 Datasheet Table 2-16. D evice 6, Function 0: Inte grated Memory Cont roller Channel 2 Control Registers DID VID 00h MC_CHANNEL_2_RANK_TIMING_A 80h PCISTS PCICMD 04h MC_CHANNEL_2_RANK_TIMING_B 84h CCR RID 08h MC_CHANNEL_2_BANK_TIMING 88h HDR 0Ch MC_CHANNEL_2_REFRESH_TIMING 8Ch 10h MC_CHANNEL_2_CKE_TIMING 90h 14h MC_CHANNEL_2_[...]

  • Página 33

    Datasheet 33 Register Description Table 2-17. Device 6, Fun ction 1: Inte g rated Memory Controller Channel 2 Address Registers DID VID 00h MC_SAG_CH2_0 80h PCISTS PCICMD 04h MC_SAG_CH2_1 84h CCR RID 08h MC_SAG_CH2_2 88h HDR 0Ch MC_SAG_CH2_3 8Ch 10h MC_SAG_CH2_4 90h 14h MC_SAG_CH2_5 94h 18h MC_SAG_CH2_6 98h 1Ch MC_SAG_ CH2_7 9Ch 20h A0h 24h A4h 28h[...]

  • Página 34

    Register Description 34 Datasheet Table 2-18. D evice 6, Function 2: Inte grated Memory Cont roller Channel 2 Rank Registers DID VID 00h MC_RIR_WA Y_CH2_0 80h PCISTS PCICMD 04h MC_RIR_WA Y_CH2_1 84h CCR RID 08h MC_RIR_WA Y_CH2_2 88h HDR 0Ch MC_RIR_W A Y_CH2_3 8Ch 10h MC_RIR_WA Y_CH2_4 90h 14h MC_RIR_WA Y_CH2_5 94h 18h MC_RIR_WA Y_CH2_6 98h 1Ch MC_R[...]

  • Página 35

    Datasheet 35 Register Description Table 2-19. Device 6, Fun ction 3: Inte g rated Memory Controller Channel 2 Thermal Control Registers DID VID 00h MC_COOLING_COEF2 80h PCISTS PCICMD 04h MC_CLOSED_LOOP2 84h CCR RID 08h MC_THROT TLE_OFFSET2 88h HDR 0Ch 8Ch 10h 90h 14h 94h 18h MC_RANK_VIRT UAL_TEMP2 98h 1Ch MC_DDR_THERM_COMMAND2 9Ch 20h A0h 24h MC_DD[...]

  • Página 36

    Register Description 36 Datasheet 2.5 PCI Standard Registers These registers appear in every function for every device. Note: Reserved bit locations are n ot shown in the following register tables. 2.5.1 VID - Vendor Identification Register The VID Register contains the v endor identification number . This 16-b it register , combined with the Devic[...]

  • Página 37

    Datasheet 37 Register Description 2.5.3 RID - Revision Id entification Register This register contains the revision num ber of the processor . The R evision ID (RID) is a traditional 8-bit R ead Only (RO) register located at offset 08h in the standard PCI header of every PCI/PCI Express compatible device and function. 2.5.4 CCR - Class Code Registe[...]

  • Página 38

    Register Description 38 Datasheet 2.5.5 HDR - Header Type Register This register identifies the header layout of the configur ation space . 2.5.6 SID/SVID - Subsystem Identity/Subsystem Vendor Identification Register This register identifies the manufacturer of the system. This 32-bit register uniquely identifies any PCI device. Device: 0 Function:[...]

  • Página 39

    Datasheet 39 Register Description 2.5.7 PCICMD - Command Register This register defines the PCI 3. 0 compatible command register values applicable to PCI Express space. Device: 0 Function: 0-1 Offset: 04h Device: 2 Function: 0-1, 4-5 Offset: 04h Device: 3 Function: 0-2, 4 Offset: 04h Device: 4- 6 Function: 0-3 Offset: 04h Bit Type Reset Value Descr[...]

  • Página 40

    Register Description 40 Datasheet 2.5.8 PCISTS - PCI Status Register The PCI Status register is a 16-bit status register that reports the occurrence of various error events on this device's PCI interface. Device: 0 Function: 0-1 Offset: 06h Device: 2 Function: 0-1, 4-5 Offset: 06h Device: 3 Function: 0-2, 4 Offset: 06h Device: 4-6 Function: 0-[...]

  • Página 41

    Datasheet 41 Register Description 2.6 SAD - System Address Decoder Registers 2.6.1 SAD_PAM0123 This register is for legacy device 0, function 0 at 90h-93h address space. 4R O T B D Capability List (CLIST) This bit is hardwired to 1 to indicate to the configur ation software that this device/function implements a list of new ca pabilities. A list of[...]

  • Página 42

    Register Description 42 Datasheet 25:24 RW 0 PAM3_LOENABLE. 0D0000h-0D3FFFh Attribute (LO ENABLE). This field controls the steerin g of read and write cycles that addr ess the BIOS area from 0D0000h to 0D3FFFh. 00 = DRAM Disabled: All accesses are d irected to ESI. 01 = Read Only: All reads ar e sent to DRAM. All writes are forwarded to ESI. 10 = W[...]

  • Página 43

    Datasheet 43 Register Description 2.6.2 SAD_PAM456 Re gister for legacy device 0, funct ion 0 94h-97h address space. Device: 0 Function: 1 Offset: 44h Access as a Dword Bit Type Reset Value Descript ion 21:20 RW 0 PAM6_HIENABLE. 0EC000h-0EFFFFh A ttribute (HIENABLE). This field controls the steering of read and write cycles that address the BIOS ar[...]

  • Página 44

    Register Description 44 Datasheet 2.6.3 SAD_HEN Register for legacy Hole Enable. 2.6.4 SAD_SMRAM Register for legacy 9Dh address space. Note both IOH and non-core have this now . Device: 0 Function: 1 Offset: 48h Access as a Dword Bit Type Reset Value Description 7R W 0 HEN: Hole Enable This field enables a memory hole in DRAM space. The DRAM that [...]

  • Página 45

    Datasheet 45 Register Description 2.6.5 S AD_PCIEXBAR Global register for PCIEXBAR address space. 2.6.6 SAD_DRAM_RULE_0, SAD_DRAM_RULE_1, SAD_DRAM_RULE_2, SAD_DRAM_RULE_3 SAD_DRAM_RULE_4, SAD_DRAM_RULE_5 SAD_DRAM_RULE_6, SAD_DRAM_RULE_7 This register provides SAD DRAM rules. Address Map for package determination. Device: 0 Function: 1 Offset: 50h A[...]

  • Página 46

    Register Description 46 Datasheet 2.6.7 SAD_INTERLEAVE_LIST_0, SAD_INTERLEAVE_LIST_1 SAD_INTERLEAVE_LIST_2, SAD_INTERLEAVE_LIST_3 SAD_INTERLEAVE_LIST_4, SAD_INTERLEAVE_LIST_5 SAD_INTERLEAVE_LIST_6, SAD_INTERLEAVE_LIST_7 This register provides SAD DRAM packag e assignments. When the corresponding DRAM_RULE hits, a 3-bit number (determine d by mode) [...]

  • Página 47

    Datasheet 47 Register Description 2.7 Intel QPI Link Registers 2.7.1 QPI_QPILCL_L0, QPI_QPILCL_L1 This register provides Intel QPI Link Control. 2.8 Integrated Memory Controller Control Registers The registers in this section apply only to processors supporting registered DIMMs. 2.8.1 MC_CONTROL This register is the Primary control register . Devic[...]

  • Página 48

    Register Description 48 Datasheet 8R W 0 CHANNEL0_ ACTIVE When set, indicate MC cha nnel 0 is active. This bit is controlled (set/reset) by software only . This bit is required to be set for an y active channel when INIT_DONE is set by software. Channel 0 AND Channel 1 activ e must both be set for a lockstep or mirrored pair . 7W O 0 INIT_DONE MC i[...]

  • Página 49

    Datasheet 49 Register Description 2.8.2 MC_STATUS This register is the MC primary status register . Device: 3 Function: 0 Offset: 4Ch Access as a Dword Bit Type Reset Value Description 4R O 1 ECC_ENABLED . ECC is enabled. 2R O 0 CHANNEL2 _DISABLED Channel 2 is disabled. This can be factory configured or if Init done is written without the channel_a[...]

  • Página 50

    Register Description 50 Datasheet 2.8.3 MC_SMI_SPARE_D IMM_ERROR_STATUS SMI sparing DIMM error threshold overflow status register . This bit is set when the per- DIMM error counter exceeds the specified threshold. The bit is reset by BIOS . Device: 3 Function: 0 Offset: 50h Access as a Dword Bit Type Reset Value Descriptio n 13:12 RW0C 0 RE DUNDANC[...]

  • Página 51

    Datasheet 51 Register Description 2.8.4 MC_SMI_SPARE_CNTRL System Man agement Interrupt and Spare control register . 2.8.5 MC_RESET_CONTROL DIMM R eset enabling controls. Device: 3 Function: 0 Offset: 54h Access as a Dword Bit Type Reset Value Description 16 RW 0 INTERRUPT_SELECT_NMI 1 = Enable NMI signalin g. 0 = Disable NMI signaling. If both NMI[...]

  • Página 52

    Register Description 52 Datasheet 2.8.6 MC_CHANNEL_MAPPER Channel mapping register . The sequence of operations to update this register is: Read MC_Channel_Mapper register Compare data read to data to be written. If different, then write. Poll MC _Channel_Mapper register until th e data read matches data written. Device: 3 Function: 0 Offset: 60h A[...]

  • Página 53

    Datasheet 53 Register Description 2.8.7 MC_MAX_DOD This reg iste r de fin es t he MA X num ber of D IMM S, RAN KS, BA NKS, ROW S, COL S amo ng all DIMMS populating the three channels. The Memory Init logic uses this register to cycle through all the memory addresses writing all 0's to initialize all locations. This register is also used for sc[...]

  • Página 54

    Register Description 54 Datasheet 2.8.8 MC_RD_CRDT_INIT These registers contain the initial read credits av ailable for issuing memory reads. T AD read credit counters are loaded with the corresponding v alue s at reset and anytime this register is written. BIOS must initialize th is registe r with appropriate values depending on the level of Isoch[...]

  • Página 55

    Datasheet 55 Register Description 2.8.9 MC_CRDT_WR_THLD This is the Memory Controller W rite Credit Thresholds register . A W r ite threshold is defined as the number of credits reserved fo r this priority (or higher) request. It is required that High threshold be greater than o r equal to Crit threshold, and that both be lower than the total W rit[...]

  • Página 56

    Register Description 56 Datasheet 2.8.11 MC_SCRUBA DDR_HI This register pair contains part of the address of the last patrol scrub request issued. When running memtest, the failing address is logged in this register on memtest errors. Software can write the next address into th is register . Scrubbing must be disabled to reliably read and write thi[...]

  • Página 57

    Datasheet 57 Register Description 2.9 TAD – Target Address Decoder Registers 2.9.1 TAD_DRAM_RULE_0, TAD_DRAM_RULE_1 TAD_DRAM_RULE_2, TAD_DRAM_RULE_3 TAD_DRAM_RULE_4, TAD_DRAM_RULE_5 TAD_DRAM_RULE_6, TAD_DRAM_RULE_7 T AD DRAM rules. Address map for channe l determination within a package. All addresses sent to this HOME agent must hi t a v a lid e[...]

  • Página 58

    Register Description 58 Datasheet 2.9.2 TAD_INTERLEAVE_LIST_0, TAD_INTERLEAVE_LIST_1 TAD_INTERLEAVE_LIST_2, TAD_INTERLEAVE_LIST_3 TAD_INTERLEAVE_LIST_4, TAD_INTERLEAVE_LIST_5 TAD_INTERLEAVE_LIST_6, TAD_INTERLEAVE_LIST_7 T AD DRAM package assignments. When th e corresponding DRAM_RULE hits, a 3-bit number (determined by mode) is used to in dex into [...]

  • Página 59

    Datasheet 59 Register Description 2.10 Integrated Memory Controller Channel Control Registers 2.10.1 MC_CHANNEL_0_DIMM_RESET_CMD MC_CHANNEL_1_DIMM_RESET_CMD MC_CHANNEL_2_DIMM_RESET_CMD Integrated Memory Controller DIMM reset co mmand register . This register is used to sequence the reset signals to the DIMMs. 9:8 RW - Logical Channel2. Index 010 of[...]

  • Página 60

    Register Description 60 Datasheet 2.10.2 MC_CHANNEL_0_DIMM_INIT_CMD MC_CHANNEL_1_DIMM_INIT_CMD MC_CHANNEL_2_DIMM_INIT_CMD Integrated Memory Controller DIMM initialization command register . This register is used to sequence the channel through the physical lay er training required for DDR. Device: 4, 5, 6 Function: 0 Offset: 54h Access as a Dword B[...]

  • Página 61

    Datasheet 61 Register Description 2.10.3 MC_CHANNEL_0_DIMM_INIT_PARAMS MC_CHANNEL_1_DIM M_INIT_PARAMS MC_CHANNEL_2_DIM M_INIT_PARAMS Initialization sequence parameters are stored in this register . Each field is 2^n count. Device: 4, 5, 6 Function: 0 Offset: 58h Access as a Dword Bit Type Reset Value Description 26 RW 0 DIS_3T. When set, 3T mode wi[...]

  • Página 62

    Register Description 62 Datasheet 2.10.4 MC_CHANNEL_0_ DIMM_INIT_STATUS MC_CHANNEL_1_DIMM_INIT_STATUS MC_CHANNEL_2_DIMM_INIT_STATUS The initialization state is stored in this register . This register is cleared on a new training command. Device: 4, 5, 6 Function: 0 Offset: 5Ch Access as a Dword Bit Type Reset Value Descript ion 9R O 0 RCOMP_CMPLT. [...]

  • Página 63

    Datasheet 63 Register Description 2.10.5 MC_CHANNEL_0_DDR3CMD MC_CHANNEL_1_DDR3CMD MC_CHANNEL_2_DDR3CMD DDR3 Configuration C ommand. This register is used to issue commands to the DIMMs such as MRS commands. The register is used by setting one of the *_V ALID bits along with the appropriate address and destinat ion RANK. The command is then issued [...]

  • Página 64

    Register Description 64 Datasheet 2.10.6 MC_CHANNEL_0_REFR ESH_THROTTLE_SUPPORT MC_CHANNEL_1_REFRESH_THROTTLE_SUPPORT MC_CHANNEL_2_REFRESH_THROTTLE_SUPPORT This register supports Self Refresh and Thermal Throttle functions. 2.10.7 MC_CHANNEL_0_MRS_VALUE_0_1 MC_CHANNEL_1_MRS_VALUE_0_1 MC_CHANNEL_2_MRS_VALUE_0_1 The initial MRS register values for MR[...]

  • Página 65

    Datasheet 65 Register Description 2.10.8 MC_CHANNEL_0_MRS_VALUE_2 MC_CHANNEL_1_MRS_VALUE_2 MC_CHANNEL_2_MRS_VALUE_2 The initial MRS register values for MR2. This register also contains the v alues used for RC0 and RC2 writes for registered DIMMs. Th ese values are used duri ng the automated training sequence when MRS writes or regi stered DIMM RC w[...]

  • Página 66

    Register Description 66 Datasheet 2.10.10 MC_CHANNEL_0_RANK_TIMING_A MC_CHANNEL_1_RANK_TIMING_A MC_CHANNEL_2_RANK_TIMING_A This register contains par ameters that spec ify the ran k timing used. All parameters are in DCLK. Device: 4, 5, 6 Function: 0 Offset: 80h Access as a Dword Bit Type Reset Value Description 28:26 RW 0 tddWrTRd. Minimum delay b[...]

  • Página 67

    Datasheet 67 Register Description 18:15 RW 0 tddRdTWr. Minimum delay be tween Read followed by a Write to different DI MMs. 0000 = 2 0001 = 3 0010 = 4 0011 = 5 0100 = 6 0101 = 7 0110 = 8 0111 = 9 1000 = 10 1001 = 11 1010 = 12 1011 = 13 1100 = 14 14:11 RW 0 tdrRdTWr. Minimum delay between Read followed by a write to different ranks on the same DIMM.[...]

  • Página 68

    Register Description 68 Datasheet 6:4 RW 0 tddRdTRd. Minimum delay between reads t o different DIMMs. 000 = 2 001 = 3 010 = 4 011 = 5 100 = 6 101 = 7 110 = 8 111 = 9 3:1 RW 0 tdrRdTRd. Minimum delay between reads t o different r anks on the same DIMM. 000 = 2 001 = 3 010 = 4 011 = 5 100 = 6 101 = 7 110 = 8 111 = 9 0R W 0 tsrRdTRd. Minimum delay bet[...]

  • Página 69

    Datasheet 69 Register Description 2.10.11 MC_CHANNEL_0_RANK_TIMING_B MC_CHANNEL_1_RANK_TIMING_B MC_CHANNEL_2_RANK_TIMING_B This register contains parameters that spec ify the r ank timing used. All parameters are in DCLK. Device: 4, 5, 6 Function: 0 Offset: 84h Access as a Dword Bit Type Reset Value Description 20:16 RW 0 B2B_CAS_DELA Y. Controls t[...]

  • Página 70

    Register Description 70 Datasheet 2.10.12 MC_CHANNEL_0_BANK_TIMING MC_CHANNEL_1_BANK_TIMING MC_CHANNEL_2_BANK_TIMING This register contains parameters that specify the bank timing parameters. These values are in DCLK. The values in these regi sters are encod ed where note d. All of these values apply to commands to the same r ank only . 2.10.13 MC_[...]

  • Página 71

    Datasheet 71 Register Description 2.10.14 MC_CHANNEL_0_CKE_TIMING MC_CHANNEL_1_CKE_TIMING MC_CHANNEL_2_CKE_TIMING This register contains parameters that spec ify the CKE timings. All units are in DCLK. 2.10.15 MC_CHANNEL_0_ZQ_TIMING MC_CHANNEL_1_ZQ_TIMING MC_CHANNEL_2_ZQ_TIMING This register contains parameters that sp ecify ZQ timing. All units ar[...]

  • Página 72

    Register Description 72 Datasheet 2.10.16 MC_CHANNEL_0_RCOMP_PARAMS MC_CHANNEL_1_RCOMP_PARAMS MC_CHANNEL_2_RCOMP_PARAMS This register contains paramete rs that specify Rcomp timings. 2.10.17 MC_CHANNEL_0_ODT_PARAMS1 MC_CHANNEL_1_ODT_PARAMS1 MC_CHANNEL_2_ODT_PARAMS1 This register contains parameters that sp ecify ODT timings. All values are in DCLK.[...]

  • Página 73

    Datasheet 73 Register Description 2.10.18 MC_CHANNEL_0_ODT_PARAMS2 MC_CHANNEL_1_ODT_PARAMS2 MC_CHANNEL_2_ODT_PARAMS2 This register contains parameters that specify F orcing OD T on Spe cific ranks. This register is used in debug only and not during normal operation. 2.10.19 MC_CHANNEL_0_ODT_MATRIX_RANK_0_3_RD MC_CHANNEL_1_ODT_MATRIX_RANK_0_3_RD MC_[...]

  • Página 74

    Register Description 74 Datasheet 2.10.20 MC_CHANNEL_0_OD T_MATRIX_RANK_4_7_RD MC_CHANNEL_1_ODT_MATRIX_RANK_4_7_RD MC_CHANNEL_2_ODT_MATRIX_RANK_4_7_RD This register contains the OD T activation matrix for RANKS 4 to 7 for R eads. 2.10.21 MC_CHANNEL_0_OD T_MATRIX_RANK_0_3_WR MC_CHANNEL_1_ODT_MA TRIX_RANK_0_3_WR MC_CHANNEL_2_ODT_MA TRIX_RANK_0_3_WR T[...]

  • Página 75

    Datasheet 75 Register Description 2.10.23 MC_CHANNE L_0_WAQ_PARAMS MC_CHANNEL_1_WAQ_PARAMS MC_CHANNEL_2_WAQ_PARAMS This register contains parameters that specify settings for the W rite Address Queue. Device: 4, 5, 6 Function: 0 Offset: B4h Access as a Dword Bit Type Reset Value Description 29:25 RW 6 PRECASWRTHRESHOLD . Threshold abo ve which Medi[...]

  • Página 76

    Register Description 76 Datasheet 2.10.24 MC_CHANNEL_0_ SCHEDULER_PARAMS MC_CHANNEL_1_SCHEDULE R_PARAMS MC_CHANNEL_2_SCHEDULE R_PARAMS These are the par ameters used to control par ameters within the scheduler . 2.10.25 MC_CHANNEL_0_MAINTENANCE_OPS MC_CHANNEL_1_MAINTENANCE_OPS MC_CHANNEL_2_MAINTENANCE_OPS This register enables various maintenance o[...]

  • Página 77

    Datasheet 77 Register Description 2.10.26 MC_CHANNEL_0_TX_BG_SETTINGS MC_CHANNEL_1_TX_BG_SETTINGS MC_CHANNEL_2_TX_BG_SETTINGS These are the parameters used to set the Start Scheduler for TX clock crossing. This is used to send commands to the DIMMs. The NA TIVE RA TIO is UCLK multiplier of BCLK = U ALIEN RA TION is DCLK multiplier of BCLK = D PIPE [...]

  • Página 78

    Register Description 78 Datasheet 2.10.28 MC_CHANNEL_0_EW_BGF_SETTINGS MC_CHANNEL_1_EW_BGF_SETTINGS MC_CHANNEL_2_EW_BGF_SETTINGS These are the par ameters used to set the early warning RX clock crossing BGF . 2.10.29 MC_CHANNEL_0_EW_BGF_OFFSET_SETTINGS MC_CHANNEL_1_EW_BGF _OFFSET_SETTINGS MC_CHANNEL_2_EW_BGF _OFFSET_SETTINGS These are the par amete[...]

  • Página 79

    Datasheet 79 Register Description 2.10.31 MC_CHANNEL_0_PAGETABLE_PARAMS1 MC_CHANNEL_1_PAG ETABLE_PARAMS1 MC_CHANNEL_2_PAG ETABLE_PARAMS1 These are the parameters used to control par ame ters for page closing policies.. 2.10.32 MC_CHANNEL_0_PAGETABLE_PARAMS2 MC_CHANNEL_1_PAG ETABLE_PARAMS2 MC_CHANNEL_2_PAG ETABLE_PARAMS2 These are the parameters use[...]

  • Página 80

    Register Description 80 Datasheet 2.10.33 MC_TX_BG_CMD_DAT A_RATIO_SETTINGS_CH0 MC_TX_BG_CMD_DATA_RATIO_SETTINGS_CH1 MC_TX_BG_CMD_DATA_RATIO_SETTINGS_CH2 Channel Bubble Generator r atios for CMD and DA T A. 2.10.34 MC_TX_BG_CMD_O FFSET_SETTINGS_CH0 MC_TX_BG_CMD_OFFS ET_SETTINGS_CH1 MC_TX_BG_CMD_OFFS ET_SETTINGS_CH2 Integrated Memory Controller Chan[...]

  • Página 81

    Datasheet 81 Register Description 2.10.36 MC_CHANNEL_0_ADDR_MATCH MC_CHANNEL_1_ADDR_MATCH MC_CHANNEL_2_ADDR_MATCH This register specifies the intended addre ss or address range where ECC errors will be injected. It can be set to match memory address on a per channel basis. The address fields can be masked in the Mask bits. Any mask bits set to 1 wi[...]

  • Página 82

    Register Description 82 Datasheet 2.10.37 MC_CHANNEL_0_ECC_ERROR_MASK MC_CHANNEL_1_ECC_ERROR_MASK MC_CHANNEL_2_ECC_ERROR_MASK This register contains mask bits for the memory controller and specifies at which ECC bit(s) the error injection should occur . Any bi ts set to a 1 will flip the corresponding ECC bit. Correctable errors can be injected by [...]

  • Página 83

    Datasheet 83 Register Description 2.10.39 Error Injection Implementation The usage model is to program the MC_CHANNEL_X_ADDR_MA TCH and MC_CHANNEL_X_ECC_ERROR_MASK register s before writing the command in MC_CHANNEL_X_ECC_ERROR_INJECT register . When writing the MC_CHANNEL_X_ECC_ERROR_INJECT register , the REPEA T_EN and MASK_HALF_CACHELINE bits ne[...]

  • Página 84

    Register Description 84 Datasheet 2.11 Integrated Memory Controller Channel Address Registers 2.11.1 MC_DOD_CH0_0, MC _DOD_CH0_1, MC_DOD_CH0_2 Channel 0 DIMM Organization Descriptor Register . Device: 4 Function: 1 Offset: 4 8h, 4Ch, 50h Access as a Dword Bit Type Reset Value Description 12:10 RW 0 RANKOFFSET . Rank Offset for calculating RANK. T h[...]

  • Página 85

    Datasheet 85 Register Description 2.11.2 MC_DOD_CH1_0, MC_DOD_CH1_1, MC_DOD_CH1_2 Channel 1 DIMM Organization Descriptor R egister . Device: 5 Function: 1 Offset: 48h, 4Ch, 50h Access as a Dword Bit Type Reset Value Description 12:10 RW 0 RANKOFFSET . Rank Offset for calculatin g RANK. This field corresponds to the first logica l r ank on the DIMM.[...]

  • Página 86

    Register Description 86 Datasheet 2.11.3 MC_DOD_CH2_0, MC _DOD_CH2_1, MC_DOD_CH2_2 Channel 2 DIMM Organization Descriptor Register . Device: 6 Function: 1 Offset: 48h, 4Ch, 50h Access as a Dword Bit Type Reset Value Description 12:10 RW 0 RANKOFFSET . Rank Offset for calculating RANK. This field corresponds to the first logica l r ank on the DIMM. [...]

  • Página 87

    Datasheet 87 Register Description 2.11.4 MC_SAG_CH0_0, MC_S AG_CH0_1, MC_SAG_CH0_2 MC_SAG_CH0_3, MC_SAG _CH0_4, MC_SAG_CH0_5 MC_SAG_CH0_6, MC_SAG _CH0_7, MC_SAG_CH1_0 MC_SAG_CH1_1, MC_SAG _CH1_2, MC_SAG_CH1_3 MC_SAG_CH1_4, MC_SAG _CH1_5, MC_SAG_CH1_6 MC_SAG_CH1_7, MC_SAG _CH2_0, MC_SAG_CH2_1 MC_SAG_CH2_2, MC_SAG _CH2_3, MC_SAG_CH2_4 MC_SAG_CH2_5, M[...]

  • Página 88

    Register Description 88 Datasheet 2.12 Integrated Memory Controller Channel Rank Registers 2.12.1 MC_RIR_LIMIT_CH0_0, MC_RIR_LIMIT_CH0_1 MC_RIR_LIMIT_CH0_2, MC_RIR_LIMIT_CH0_3 MC_RIR_LIMIT_CH0_4, MC_RIR_LIMIT_CH0_5 MC_RIR_LIMIT_CH0_6, MC_RIR_LIMIT_CH0_7 MC_RIR_LIMIT_CH1_0, MC_RIR_LIMIT_CH1_1 MC_RIR_LIMIT_CH1_2, MC_RIR_LIMIT_CH1_3 MC_RIR_LIMIT_CH1_4[...]

  • Página 89

    Datasheet 89 Register Description 2.12.2 MC_RIR_WAY_CH0_0, MC_RIR_WAY_CH0_1 MC_RIR_WAY_CH0_2, MC_RIR_WAY_CH0_3 MC_RIR_WAY_CH0_4, MC_RIR_WAY_CH0_5 MC_RIR_WAY_CH0_6, MC_RIR_WAY_CH0_7 MC_RIR_WAY_CH0_8, MC_RIR_WAY_CH0_9 MC_RIR_WAY_CH0_10, MC_RIR_WAY_CH0_11 MC_RIR_WAY_CH0_12, MC_RIR_WAY_CH0_13 MC_RIR_WAY_CH0_14, MC_RIR_WAY_CH0_15 MC_RIR_WAY_CH0_16, MC_R[...]

  • Página 90

    Register Description 90 Datasheet 2.12.3 MC_RIR_WAY_CH1_0, MC_RIR_WAY_CH1_1 MC_RIR_WAY_CH1_2, MC_RIR_WAY_CH1_3 MC_RIR_WAY_CH1_4, MC_RIR_WAY_CH1_5 MC_RIR_WAY_CH1_6, MC_RIR_WAY_CH1_7 MC_RIR_WAY_CH1_8, MC_RIR_WAY_CH1_9 MC_RIR_WAY_CH1_10, MC_RIR_WAY_CH1_11 MC_RIR_WAY_CH1_12, MC_RIR_WAY_CH1_13 MC_RIR_WAY_CH1_14, MC_RIR_WAY_CH1_15 MC_RIR_WAY_CH1_16, MC_R[...]

  • Página 91

    Datasheet 91 Register Description 2.12.4 MC_RIR_WAY_CH2_0, MC_RIR_WAY_CH2_1 MC_RIR_WAY_CH2_2, MC_RIR_WAY_CH2_3 MC_RIR_WAY_CH2_4, MC_RIR_WAY_CH2_5 MC_RIR_WAY_CH2_6, MC_RIR_WAY_CH2_7 MC_RIR_WAY_CH2_8, MC_RIR_WAY_CH2_9 MC_RIR_WAY_CH2_10, MC_RIR_WAY_CH2_11 MC_RIR_WAY_CH2_12, MC_RIR_WAY_CH2_13 MC_RIR_WAY_CH2_14, MC_RIR_WAY_CH2_15 MC_RIR_WAY_CH2_16, MC_R[...]

  • Página 92

    Register Description 92 Datasheet 2.13 Memory Thermal Control 2.13.1 MC_THERMAL_CONTROL0 MC_THERMAL_CONTROL1 MC_THERMAL_CONTROL2 Controls for the Integr ated Memory Controller thermal throttle logic for each channel. 2.13.2 MC_THERMAL_STATUS0 MC_THERMAL_STATUS1 MC_THERMAL_STATUS2 Status registers for the thermal throttling logic for each channel. D[...]

  • Página 93

    Datasheet 93 Register Description 2.13.3 MC_THERMAL_DEFEATURE0 MC_THERMAL_DEFEATURE1 MC_THERMAL_DEFEATURE2 Thermal Throttle defeature register for each channel. 2.13.4 MC_THERMAL_PARAMS_A0 MC_THERMAL_PARAMS_A1 MC_THERMAL_PARAMS_A2 P arameters used by Open Loop Throughput Throttling (OL TT) and Closed Loop Thermal Throttling (CL T T). Device: 4, 5, [...]

  • Página 94

    Register Description 94 Datasheet 2.13.5 MC_THERMAL_PARAMS_B0 MC_THERMAL_PARAMS_B1 MC_THERMAL_PARAMS_B2 Par ameters used by the thermal throttling logic. 2.13.6 MC_COOLING_COEF0 MC_COOLING _COEF1 MC_COOLING _COEF2 Heat removed from DRAM 8 DCLKs. This should be scaled relative to the per command weights and the initial v alue of the throttling thres[...]

  • Página 95

    Datasheet 95 Register Description 2.13.7 MC_CLOSED_LOOP0 MC_CLOSED_LOOP1 MC_CLOSED_LOOP2 This register controls the closed loop ther mal response of the DRAM thermal throttle logic. It supports immediate thermal throttle an d 2X refresh. In addition, the register is used to configure the throttling duty cycle. 2.13.8 MC_THROTTLE_OFFSET0 MC_THROTTLE[...]

  • Página 96

    Register Description 96 Datasheet 2.13.9 MC_RANK_VIRTUAL_TEMP0 MC_RANK_VIRTUAL_TEMP1 MC_RANK_VIRTUAL_TEMP2 This register contains the 8 most significant bits [37:30] of the virtual temperature of each rank. The difference between the virtual temperature and the sensor temperature can be used to determine how fast fan speed should be increased. The [...]

  • Página 97

    Datasheet 97 Register Description 2.13.11 MC_DDR_THERM_STATUS0 MC_DDR_THERM_STATUS1 MC_DDR_THERM_STATUS2 This register contains the status portion of the DDR_THERM# functionality as described in the processor datasheet (i.e. , what is ha ppening or has happened with respect to the pin). 2.14 Integrated Memory Controller Miscellaneous Registers 2.14[...]

  • Página 98

    Register Description 98 Datasheet 2.14.2 MC_DIMM_CLK_RATIO This register is for the Re quested DIMM clock ratio (Qclk). Th is is the data rate going to the DIMM. The clock sent to the DIMM is 1/2 of QCLK r ate. § Device: 3 Function: 4 Offset: 54h Access as a Dword Bit Type Reset Value Description 4:0 RW 6 QCLK_RATIO. Requested ratio of Qc lk/Bclk.[...]