Iiyama TF3237MSC-B1AG manual

ENGLISH Thank you very much for choosing the iiyama LCD monitor . We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor . Please keep this manual in a safe place for your future reference. USER MANUAL[...]

ENGLISH  We reserve the right to change speci fi cations without notice.  All trademarks used in this user manual are the property of their respective owners. We recommend recycling of used product. Please contact your dealer or iiyama service center . Recycle information is obtained via the Internet, using the address: http://www .iiyama.co[...]

ENGLISH T ABLE OF CONTENTS FOR YOUR SAFETY ............................................................................ 1 SAFETY PRECAUTIONS................................................................ 1 SPECIAL NOTES ON LCD MONITORS ......................................... 3 CUSTOMER SER VICE ...................................................[...]

ENGLISH FOR YOUR SAFETY 1 FOR YOUR SAFETY W ARNING STOP OPERA TING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately . Further use may be dangerous and can cause fi re or electric shock. NEVER REMOVE THE CAB[...]

ENGLISH 2 FOR YOUR SAFETY CAUTION INST ALLA TION LOCA TION Do not install the monitor where sudden temperature changes may occur , or in humid, dusty or smoky areas as it may cause fi re, electric shock or damage. Y ou should also avoid areas where the sun shines directly on the monitor . DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monito[...]

ENGLISH FOR YOUR SAFETY 3 The following symptoms are normal with LCD monitors and do not indicate a problem. NOTE  When you fi rst turn on the LCD monitor , the picture may not fi t in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position.  Y ou may fi nd slig[...]

ENGLISH 4 FOR YOUR SAFETY NOTE  If you have to return your unit for service and the original packaging has been discarded, please contact your dealer or iiyama service center for advice or replacement packaging. W ARNING  If you drop any materials or liquids such as water into the monitor when cleaning, unplug the power cable immediatel[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 5 The following accessories are included in your package. Check to see if they are enclosed with the monitor . If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama of fi ce. * The rating of the Power Cable enclosed in 120V area is 10A/125V . If you are using a power s[...]

ENGLISH 6 BEFORE YOU OPERA TE THE MONITOR UNP ACKING : ProLite TF4237MSC Before unpacking your monitor , prepare a stable, level, and clean surface near a wall outlet. Set the LCD Monitor box in an upright position and open from the top of the box before removing the top cushions. Remove the carton holders. Remove the top cushion and take the acces[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 7 CONTROLS AND CONNECTORS : MONITOR <Front> POWER UP DOWN AUTO/EXIT SOURCE/OK MENU LED IR AC IN USB COM IN HDMI DVI IN VGA IN AUDIO IN POWER UP DOWN AUTO/EXIT SOURCE/OK MENU LED IR <Back> POWER Power Button UP Up/V olume + Button DOWN Down/V olume - Button AUTO / EXIT Auto/Exit Button SOURCE / OK [...]

ENGLISH 8 BEFORE YOU OPERA TE THE MONITOR INST ALLA TION CAUTION  Follow the manual instructions for the type of mount you have selected. Refer all servicing to quali fi ed service personnel.  Moving the monitor requires at least two people.  Before installing, please make sure the wall is strong enough to hold the necessary weight of the[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 9 [ROT A TING THE DISPLA Y] A A Not A vailable A A Landscape Portrait A vailable It is designed to be compatible in both landscape and portrait modes, however , it is optimized for landscape mode.[...]

ENGLISH 10 BEFORE YOU OPERA TE THE MONITOR CONTROLS AND CONNECTORS : REMOTE CONTROL (For maintenance) POWER MUTE MEMU AUTO OK PLA Y EXIT STOP VOL SELECT POWER T urns the monitor ON and OFF . MENU Opens the monitor ’s on-screen menu systems. When the menu system is already open, pressing this button will select the previous submenu. Navigates thro[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 1 1 T o use the remote control, insert the button battery . PREP ARING THE REMOTE CONTROL CAUTION Do not use any other batteries other than those speci fi ed in this manual for the Remote Control. Burst batteries or the electrolyte from these batteries may cause stains, fi re or injury . Push Lock to right [...]

ENGLISH 12 BEFORE YOU OPERA TE THE MONITOR BASIC OPERA TION  T urning the monitor ON The monitor is on and the Power Indicator turns Green when you press the Power Button on the monitor or the Remote Control. The monitor is of f and the Power Indicator turns Orange when you press the Power Button on the monitor or the Remote Control. Press again[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 13  Move the cursor horizontally Select menu or setting, or perform the adjustment by pressing the / Button on the Remote Control while the menu page is displayed on the screen.  Move the cursor vertically Select adjustment by pressing the UP / DOWN Button on the monitor or the / Button on the Remote Co[...]

ENGLISH 14 BEFORE YOU OPERA TE THE MONITOR  Adjust the volume of sound Press the UP / DOWN Button on the Monitor or the VOL / Button on the Remote Control to adjust the volume of sound when the menu page is not displayed on the screen.  Switch the input signal This is activated when you successively press the SOURCE Button on the monitor or S[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 15 CONNECTING YOUR MONITOR Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the computer to the monitor with the USB Cable. Connect the Power Cable to the monitor fi rst and then to the power supply . T urn on your monitor (Mai[...]

ENGLISH 16 BEFORE YOU OPERA TE THE MONITOR  Procedure for turning ON the Power Switch Turn ON the monitor fi rst, and then the computer .  MUL TI-TOUCH This monitor complies with DDC2B of VESA standard. (Plug&play compliant) The MUL TI-TOUCH function runs on Windows7/8 by connecting the monitor to DDC2B compliant computer with the USB[...]

ENGLISH OPERA TING THE MONITOR 17 OPERA TING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 32. Y ou are also able to adjust the picture by following the button operation shown below . For more detailed adjustments, see page 23 for SCREEN ADJUSTMENTS. Press the [...]

ENGLISH 18 OPERA TING THE MONITOR * Available for Back Controller only .  LOCK MODE: Pressing and holding the MENU button and the Power Switch for about 3 seconds when the Menu is not displayed. * The OSD menu is not displayed when the OSD is locked. Pressing and holding the MENU button and the Power Switch for about 3 seconds when the Menu i[...]

ENGLISH OPERA TING THE MONITOR 19 ADJUSTMENT MENU CONTENTS Adjustment Item Problem / Option Button to Press T oo dark T oo bright Brightness * Contrast T oo dull T oo intense * Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright. Brightness/Contrast Adjustment Item Problem / Option Button to Press G[...]

ENGLISH 20 OPERA TING THE MONITOR Adjustment Item Problem / Option Button to Press Phase * 1,3 Clock * 1,3 T oo left T oo right T oo low T oo high H. Position * 1 V . Position * 1 T oo narrow T oo wide T o correct fl ickering text or lines Auto Adjust * 1,2 Adjust H./V . Position, Clock and Phase automatically . * 1 Only Analog input. * 2 For best[...]

ENGLISH OPERA TING THE MONITOR 21 OSD time out Y ou can set the OSD display duration time between 5 and 30 seconds. Adjustment Item Problem / Option Button to Press Other Settings Language English Deutsch English German Français French Nederlands Dutch Español Spanish Poliski Polish P усский Russian V olume T oo soft T oo loud Mute Off On T[...]

ENGLISH 22 OPERA TING THE MONITOR When only one of the three signal inputs is connected to the signal source, the one connected is automatically selected. Input Source function is not available if there is no signal input from the selected connector or during the power management mode. Select the analog input. Select the digital(DVI) input. VGA DVI[...]

ENGLISH OPERA TING THE MONITOR 23 SCREEN ADJUSTMENTS  The screen adjustments described in this manual are designed to set image position and minimize fl icker or blur for the particular computer in use.  The monitor is designed to provide the best performance at resolution of 1920 × 1080, but can not provide the best at resolutions of less [...]

ENGLISH 24 OPERA TING THE MONITOR 1) Adjust the H-Position so that the left side of the picture frame will move to the left edge of the display area.  When the left side of the picture frame moves apart from the left edge of the display area during the Clock adjustment, adjust steps 1) and 2).  Another way to make the Clock adjustment is to c[...]

ENGLISH OPERA TING THE MONITOR 25  In case the strong fl icker or blurs remain on a part of the screen, repeat steps and because the Clock may not be adjusted correctly . If the fl icker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from again.  Adjust the H-Position after the Phase adjustment if the[...]

ENGLISH 26 OPERA TING THE MONITOR  Even when using the power management mode, the monitor consumes electricity . Turn off the Power Switch whenever the monitor is not in use, during the night and weekends, to avoid unnecessary power consumption.  It is possible that the video signal from the computer may be on while the H or V sync sign[...]

ENGLISH TROUBLE SHOOTING 27 The screen is not synchronized.  The Signal Cable is properly connected.  The signal timing of the computer is within the speci fi cation of the monitor .  The video output level of the c omputer is within th e speci fi ca tion of the monitor . The picture does not appear .  The Power Cable is ?[...]

ENGLISH 28 Recycling information For better environment protection please don't dispose your monitor . Please visit our web site: www .iiyama.com/recycle for monitor recycling. RECYCLING INFORMA TION[...]

ENGLISH APPENDIX 29 APPENDIX Design and speci fi cations are subject to change without prior notice. SPECIFICA TIONS : ProLite TF3237MSC LCD Panel Panel technology MV A 0.364mm H × 0.364mm V Response time Pixel pitch 6.5ms (Gray to Gray) Display Colors Approx.16.7M Sync Frequency Analog: Horizontal: 31.47-67.50kHz, V ertical: 47-63Hz Digital: Hor[...]

ENGLISH 30 APPENDIX SPECIFICA TIONS : ProLite TF4237MSC LCD Panel Panel technology IPS 0.4833mm H × 0.4833mm V Response time Pixel pitch 6ms (T ypical) Display Colors Approx.16.7M Sync Frequency Analog: Horizontal: 31.47-67.50kHz, V ertical: 47-63Hz Digital: Horizontal: 15.62-67.50kHz, V ertical: 24-60Hz Maximum Resolution 1920 × 1080, 2.1 MegaPi[...]

ENGLISH APPENDIX 31 DIMENSIONS : ProLite TF3237MSC DIMENSIONS : ProLite TF4237MSC AC IN USB COM IN HDMI DVI IN VGA IN AUDIO IN POWER UP DOWN AUTO/EXIT SOURCE/OK MENU LED IR 4xM6 SCREW HOLE (VESA MOUNT) 8xM6 SCREW HOLE (Outer) 700.5mm/27.6” 781.5mm/30.8” 395.0mm/15.6” 476.0mm/18.7” 355.0mm/14.0” 238.0mm/9.4” 620.0mm/24.4” 35.5mm/1.4”[...]

ENGLISH 32 APPENDIX COMPLIANT TIMING M139A21 * 1 DVI/HDMI input only . * 2 HDMI input only . NOTE Video Mode Horizontal Frequency V ertical Frequency Dot Clock VESA VGA 640 × 480 31.469kHz 59.940Hz 25.175MHz 720 × 400 31.467kHz 70.080Hz 28.320MHz SVGA 800 × 600 37.879kHz 60.317Hz 40.000MHz XGA 1024 × 768 48.363kHz 60.004Hz 65.000MHz 1280 × 720[...]