Iiyama H511S manual

USER MANUAL Thank you very much for choosing the iiyama LCD monitor . We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor . Please keep this manual in a safe place for your future reference. ENGLISH DEUTSCH FRANCAIS NEDERLANDS SVENSKA IT ALIANO[...]

ENGLISH Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the[...]

ENGLISH Congratulations! Y ou have just purchased a TCO’99 approved and labelled product! Y our choice has provided you with a product developed for professional use. Y our purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. Why do we have env[...]

ENGLISH Environmental requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances. Most flame retardants contain bromine or chlor[...]

ENGLISH FCC DECLARA TION OF CONFORMITY Model Number: PLH51 1S Trade Name: iiyama Responsible party: IIY AMA North America, Inc. Address: 65 West S treet Road, Suite 101B, Warminster , P A18974 U.S.A. T elephone number: 215-682-9050 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This dev[...]

ENGLISH FOR YOUR SAFETY .............................................................................. 1 SAFETY PRECAUTIONS ................................................................. 1 SPECIAL NOTES ON LCD MONITORS ............................................. 3 CUSTOMER SERVICE . . . . . . ...................................................[...]

ENGLISH FOR YOUR SAFETY W ARNING ST OP OPERA TING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately . Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage c[...]

ENGLISH 2 FOR YOUR SAFETY CAUTION INST ALLA TION LOCA TION Do not install the monitor where sudden temperature changes may occur , or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. Y ou should also avoid areas where the sun shines directly on the monitor . DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor [...]

ENGLISH The following symptoms are normal with LCD monitors and do not indicate a problem. NOTE When you first turn on the LCD monitor , the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position.  Due to the nature of the LCD screen, an afterimage o[...]

ENGLISH 4 BEFORE YOU OPERA TE THE MONITOR BEFORE YOU OPERA TE THE MONIT OR The monitor functions as a hub when connected to a USB compliant computer and USB peripherals. However , with older operating systems and/or BIOS settings in your computer , the USB hub may not operate. In this case, please contact your computer dealer first for advice. Plea[...]

ENGLISH FEA TURES      51cm (20.1") TFT Color LCD Monitor      Supports Resolutions up to 1600 × 1200      High Contrast 400:1 / High Brightness 250cd/m 2 /Quick Response Time 16ms      17.8mm Narrow Bezel & Slim Design      Multi-Color Control Supports sRGB Intern[...]

ENGLISH Optional parts as below are available for your LCD monitor . Please contact your local iiyama dealer or regional iiyama office for more details. The Protection Sheet may be attached to the LCD panel surface to protect it from stains or scratches.  Protection Sheet (Parts No. 832Z001-05) OPTIONAL P ARTS The following accessories are inclu[...]

ENGLISH A Power Switch / Power Indicator (POWER) Green: Normal operation (ProLite H51 1S) Blue: Normal operation (ProLite H51 1S-B) Orange: Power Management The monitor enters into power management mode which reduces the power consumption to less than 5W when receiving no horizontal and/or vertical sync signal. B Auto Button (AUTO) See page 13 for [...]

ENGLISH Power Cable (Accessory) Audio Cable (Accessory) Computer D-Sub Signal Cable (Accessory) DVI-D Signal Cable CONNECTING YOUR MONITOR [Example of Connection] A Ensure that both the computer and the monitor are switched off. B Connect the computer to the monitor with the signal cable. (See page 27 for CONNECTOR PIN ASSIGNMENT .) C Connect the m[...]

ENGLISH BEFORE YOU OPERA TE THE MONIT OR 9 COMPUTER SETTING  Signal Timing Change to the desired signal timing listed on page 26: COMPLIANT TIMING .  Windows 95/98/2000/Me/XP Plug & Play The iiyama LCD monitor complies with DDC1/2B of VESA standard. The Plug & Play function runs on Windows 95/98/2000/Me/XP by connecting the monitor to[...]

ENGLISH ADJUSTING THE HEIGHT AND THE VIEWING ANGLE  For optimal viewing it is recommended to look at the full face of the monitor , then adjust the monitor's Height and angle to your own preference.  Hold the stand so that the monitor does not topple when you change the monitor’s angle.  you are able to adjust the monitor's hei[...]

ENGLISH OPERA TING THE MONIT OR T o create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 26. Y ou are also able to adjust the picture by following the button operation shown below . For more detailed adjustments, see page 19 for SCREEN ADJUSTMENTS. ( ( ( ( ( Press the Menu Button to[...]

ENGLISH 12 OPERA TING THE MONITOR ADJUSTMENT MENU CONTENTS Adjustment Item Problem / Option Button to Press T oo dark T oo bright Brightness * 1 Contrast T oo dull T oo intense T o correct flickering text or lines Clock * 2 Phase * 2 H-Position T oo far to the left T oo far to the right V -Position T oo low T oo high Return to Menu Highlight “Men[...]

ENGLISH Menu : 2 (Analog) On Problem / Option Button to Press Adjustment Item Color T emp. Bluish white Sharpness 1 2 3 4 5 Adjust the picture quality at resolutions of less than 160 0× 12 0 0. Y ou can change the picture quality from 1 to 5 (sharp to soft). Press the + Button to change the picture quality in numerical order . Press the – Button[...]

ENGLISH 14 OPERA TING THE MONIT OR Menu : 2 (Analog) Return to Menu Highlight “Menu : 2” again. Off Mode1 High contrast Dark Gamma Mode1 Brightness of back-light is reduced. Mode2 Brightness of back-light is reduced more than Mode1. Economy Mode Off Normal Mode2 Direct Problem / Option Adjustment Item  Economy Mode: When OSD menu is off, hol[...]

ENGLISH Menu : 3 (Analog) O f f Lockout is canceled. Japanese Adjustment Item Problem / Option Button to Press OSD Position 1 2 3 4 5 Y ou can move the OSD display area to any one of the following 5 positions within the overall display: Italiano Language English Deutsch English German Français Español French S panish Direct Italian Y ou can skip [...]

ENGLISH 16 OPERA TING THE MONIT OR G R B Menu : 1 (Digital) Digital Input Adjustment Item Problem / Option Button to Press T oo dark T oo bright Brightness * 1 Contrast T oo dull T oo intense * 1 Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright. Direct Direct Sharpness Off Normal Mode1 High contr[...]

ENGLISH  Economy Mode: When OSD menu is off, holding the Menu button for 1-2 seconds will toggle the Economy Mode switch Off, Mode1 and Mode2. Direct Y ou can skip the Menu pages and display an adjustment scale directly by using the following button operations. Menu : 1 (Digital) Return to Menu Highlight “Menu : 1” again. Mode1 Brightness of[...]

ENGLISH 18 OPERA TING THE MONIT OR Menu : 2 (Digital) O f f Lockout is canceled. Japanese Adjustment Item Problem / Option Button to Press OSD Position 1 2 3 4 5 Y ou can move the OSD display area to any one of the following 5 positions within the overall display: Italiano Language English Deutsch English German Français Español French S panish D[...]

ENGLISH OPERA TING THE MONITOR 19 SCREEN ADJUSTMENTS  The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use.  The monitor is designed to provide the best performance at resolution of 16 0 0 × 120 0 , but can not provide the best at resolutions of les[...]

ENGLISH 20 OPERA TING THE MONIT OR + – F F F F F 1) Adjust the H-Position so that the left side of the picture frame will move to the left edge of the display area. NOTE  When the left side of the picture frame moves apart from the left edge of the display area during the Clock adjustment, adjust steps 1) and 2).  Another way to make the Cl[...]

ENGLISH OPERA TING THE MONITOR 21 NOTE  In case the strong flicker or blurs remain on a part of the screen, repeat steps F and G because the Clock may not be adjusted correctly . If the flicker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from C again.  Adjust the H-Position after the Phase adjustment[...]

ENGLISH 22 OPERA TING THE MONIT OR Even when using the power management mode, the monitor consumes electricity . T urn off the Power Switch whenever the monitor is not in use, during the night and weekends, to avoid unnecessary power consumption. NOTE  It is possible that the video signal from the computer may be on while the H or V sync signal [...]

ENGLISH TROUBLE SHOOTING Perform the adjustments described in OPERA TING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERA TING THE MONITOR or if the problem persists. If you are experiencing a problem which is n[...]

ENGLISH 24 TROUBLE SHOOTING Problem Check No sound.  The Audio Cable is properly connected.  The audio output level of the audio equipment is within the specification of the monitor . F  The audio equipment (computer etc.) is ON.  The V olume is turned up.  The Mute is OFF . The sound is too loud or too quiet. G  The audio output [...]

ENGLISH SPECIFICA TIONS APPENDIX LCD Panel Size Driving system a-Si TFT Active Matrix Diagonal: 51cm / 20.1" 0.255mm H × 0.255mm V Response time Pixel pitch 16ms (Black, white, black) Display Colors 16,777,216 maximum Sync Frequency Dot Clock 162MHz maximum Maximum Resolution 1600 × 1200, 1.9 MegaPixels Input Connector Input Sync Signal Plug[...]

ENGLISH 446mm/17.6" 410.5mm/16.2" 308.5mm/12.1" 375mm/14.8" 70mm/2.8" 391.5mm/15.4" (501.5mm/19.7") 242mm/9.5" 236.5mm/9.3" 300.5mm/11.8" 26 APPENDIX COMPLIANT TIMING * DVI input is not compliant. NOTE DIMENSIONS Video Mode * * * * * Dot Clock 25.175MHz 31.500MHz 31.500MHz 36.000MHz 36.000MHz 40.000[...]

ENGLISH 11 1 Input Signal CONNECTOR PIN ASSIGNMENT  D-Sub mini 15pin Connector 3 Red video 8 Pin 2 4 5 6 7 Pin Blue video Green video ground Blue video ground 9 10 12 13 Ground Input Signal V -Sync 15 14 Red video ground Data line (SDA)* Clock line (SCL)* * Compliant to VESA DDC. Ground Reserved port 3 8 1 2 4 5 6 7 9 10 11 12 15 20 13 14 16 17 [...]