Husqvarna 325HS75X Series, 325HS99X Series manual

101 90 46-26 325HS75/HS99 Operator's Manual Please read these instructions carefully and make sure you understand them before using the hedge trimmer.[...]

2 – English SYMBOL EXPLANA TION W ARNING! The hedge trimmer can be dangerous! Careless or incorrect use can result in serious, even fatal injury . Read through the O perator‘s Manual carefully and understand the content before using the hedge trimmer . Always use • Ear protection • Appro ved eye protection Symbols • This product is in acc[...]

English – 3 CONTENTS List of contents SYMBOL EXPLANA TION Symbols ............................................................................... 2 CONTENTS List of contents .................................................................... 3 SAFETY INSTRUCTIONS P ersonal protective equipment ............................................. 4 The [...]

4 – English The machine’ s pr otective equipment This section describes the hedge trimmer ’ s protective equip- ment, its function and how checks and maintenance ar e carried out to ensure that it operates corr ectly . (See the chapter ”What is what” to locate where this equipment is positioned on your machine.) IMPORT ANT INFORMA TION ?[...]

English – 5 4. Vibration damping system The hedge trimmer is equipped with a vibration damping system, which is designed to give as vibra- tion-free and comfortable use as possible. The hedge trimmer ’ s vibration damping system reduces the transfer of vibrations between the engine/unit blades and the hedge trimmer ’ s handles. The engine bod[...]

6 – English SAFETY INSTR UCTIONS W ARNING! Never use a machine with defective safety equipment. The safety equipment should be maintained as described in this section. If your machine does not meet any of these controls you should contact your service workshop. ! W ARNING! Always stop the engine before starting work on any part of the cutting equ[...]

English – 7 SAFETY INSTR UCTIONS 5. Muffler • N ever use a machine that has a defective muffler . • Check regularly that the muffler is secure. • If your muffler is fitted with a spark arrest screen then it should be cleaned regularly . A blocked screen leads to the engine overheating with serious damage as a result. N ever use a muffler wi[...]

8 – English IMPORT ANT INFORMA TION • The machine is only designed for cutting branches and twigs. • Never use the machine if you are tired, if you have consumed alcohol, or if you are taking medicines that can affect your sight, your judgement or the control of y our body . • Use personal protective equipment. See the section ” Personal [...]

English – 9 SAFETY INSTR UCTIONS Safety instructions when using the hedge trimmer ! Protective instructions while working • Always ensure you have a safe and firm working position. • Always use both hands to hold the machine. Hold the machine in front of you. • Use your left hand to operate the throttle. • Make sure that your hands and fe[...]

10 – English Basic working techniques • When cutting the sides of a hedge, work from the bottom upwards. When cutting horizontally, work from right to left. • Adjust the throttle setting to suit the load. • When trimming a hedge the engine should always be turned away from the hedge. • The hedge trimmer should be held as close to the body[...]

English – 11 16. Air filter cover 17. Spar k plug spanner 18. Allen key 19. Blade co ver (T ransport) WHA T IS WHA T? What is what on the hedge trimmer? 1. Operator ’ s Manual 2. Grease nipple 3. Gearbox 4. Blades 5. Hand guard 6. Handle 7. Cylinder co ver 8. Starter handle 9. Fuel cap 10. F uel tank 11. Air purge 12. Choke 13. Throttle trigger[...]

12 – English FUEL HANDLING • Clean around the fuel cap. Contamination in the tank can disrupt operations. • Ensure that the fuel is well mixed by shaking the container before filling the tank. 5 10 15 20 2% (1:50) 0,10 0,20 0,30 0,40 3% (1:33) 0,15 0,30 0,45 0,60 Gasolin Benzin Essence Gasolina Lit. Oil • Ö l Huile • Aceite Lit. 1 2 1/2 [...]

English – 13 ST AR T AND ST OP Control before starting • Inspect the working ar ea. Remove objects that can be thrown. • Check the blades. Nev er use blades that are dull, cracked or damaged. • Check that the hedge trimmer is in full working order . Check that all nuts and bolts are tightened correctly . • Make sure the gearbo x is lubric[...]

14 – English Carburettor Y our H usqvarna product has been designed and manufac- tur ed to specifications that reduce harmful emissions. After your unit has been run 8-10 tanks of fuel the engine has broken in. T o ensure that your unit is at peak perform- ance and producing the least amount of harmful emissions after break in, hav e your authori[...]

English – 15 MAINTENANCE Adjust the idling speed with the screw T , if it is necessary to readjust. F irst turn the idle speed adjusting screw T clockwise until the blades start moving. Then turn the screw anti-clockwise until the blades stop. The idle speed is correctly adjusted when the engine runs smoothly in every position. There should also [...]

16 – English Cooling system T o maintain as low operat- ing temperature as possible the engine is equipped with a cooling system. The cooling system consists of: 1. An air intake on the starter unit. 2. Cooling fins on the flywheel. 3. Cooling fins on the cylinder 4. Cylinder cov er (leads cold air onto the cylinder). Clean the cooling system usi[...]

English – 17 Gearbox There is a grease nipple (A) on the gearbox. U se a grease gun to top up with grease. This should be carried out after approximately ev er y 20 working hours. U se H usqvarna special grease, N o. 503 98 96-01. N ote that the gearbox must not be filled completely with gr ease. The gr ease expands as the machine heats up during[...]

18 – English Weekly maintenance Maintenance schedule Below follo ws some general maintenance instructions. If you need further information please contact your service workshop. MAINTENANCE 1. Check the starter , the starter cord and the return spring. 2. Make sure that the vibration damping elements are not damaged. 3. Clean the outside of the sp[...]

English – 19 Monthly maintenance MAINTENANCE 1. Clean the fuel tank. 2. Clean the carburettor and the area surrounding it. 3. Clean the fan wheel and the area around it. 4. Check the fuel filter and the fuel pipe, replace if necessary . 5. Check all cables and connections. 6. Check the clutch, clutch springs and the clutch drum with regard to wea[...]

20 – English 325HS75 1,55/25,4 1,34/34 1,10/28 2 700 11 000 0,9 kW/ 9 000 rpm Ye s Ye s W albro MB/CD Champion R CJ 7Y 0,02/0,5 W albro WT 0,85/0,4 12,1/5,5 96 104 2,0/2,9 1,7/4,2 750 4 490 325HS99 1,55/25,4 1,34/34 1,10/28 2 700 11 000 0,9 kW/ 9 000 rpm Ye s Ye s W albro MB/CD Champion R CJ 7Y 0,02/0,5 W albro WT 0,85/0,4 12,8/5,8 97 104 2,2/2,5[...]

EU declaration of conformity (Only applies to Europe) (Directive 98/37/EC, Annex II, A) We, Husqvarna AB, S-561 82 Huskvarna, Sweden, tel: +46 36-146500, declare under sole responsibility that the hedge trimmers Husqvarna 325HS75 and 325HS99 from 1999 ’ s serial numbers and onwards (the year is clearly stated in plain text on the type plate with [...]

2000W03 ´*3$^¶6/¨[...]

We hope you find the links below useful. For further ga rdening information visit www.GardenResources.c o.uk Blower Vacs Brush cutters Brushcutters Chainsaws Chain saws Cultivators Cylinder lawn mowers Cylinder mowers Echo chainsa ws Echo Strimmers Electric chainsaws Fertiliser spreaders Garden blowers Garden rollers Garden shredders Garden tractor[...]