HP 2209T manual

USER'S MANUAL L2105tm / 2209t LCD Touch Monitors Agency no.: HSTND-2791-Q[...]

Copyright © 2009 - 201 1 Hewlett-Packard Development Company, L.P. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a r etrieval system , or translated into any language in any form or by any means, except documentation kept by the pur chaser fo[...]

Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Th is equipment generates, us[...]

Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing EquipmentRegulations. Avis Canadien Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matérielbrouilleur du Canada. Japanese Notice Korean Notice Power Cord Set Requirements The monitor power supply is [...]

Product Environmental Notices Materials Disposal This HP product contains mercury in the fluorescent lamp in the display LCD that mig ht require special handling at end-of-life. Disposal of this material can be regulated because of environmental considerations. For disposal or recycling information, conta ct the local authorities or the Electronic [...]

1 Table of Contents Safety Inst ructions ............................................................................................................ ... 2 Recycling In formation .......................................................................................................... 3 System components and accesso ries............................[...]

2 Safety Instructions  Please keep the display away from any heat sources such as electric radi ators or direct sunlight. Place the display in a stable and well-ventilated place.  The holes or openings on the display are designed for ventilation. Do not cover or block the ventilation holes or openings with any objects.  Remove protective f[...]

3 Recycling Information HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, go to http://www.hp.com/recycle.[...]

4 System components and accessories Use the provided stylus as a touch pointing device. However, the stylus is not required for optical touch applications; for example, finger and other pointing instruments may be used. If any component is missing, please contact your local dealer for technical support or customer service. Note: Please keep the ori[...]

5 Connection instructions Installing the display Install: Remove: Place the display on the table (Figure 1) Packaging procedures If you need to package the display again, please keep the original carton and packing materials. The procedures for re-packaging the display are as follows: 1. Unplug the power cord from the display (make sure all attache[...]

6 Connection instructions CAUTION: Before installation, please make sure to power off the display and the computer. (Figure 3) ○ 1 Power cord Connect one end of the power cord into the AC power connector on the rear of the display, and the other end to an electrica l wall outlet. ○ 2 VGA cable Connect the signal cable: - For analog operation us[...]

7 Using the display Turning on the display Turn on the display before turning on the computer. When the power is on, the LED on the power button lights blue and the screen image will appear after about 10 seco nds. If the LED doesn't light blue or no image appears, please verify if the display is properly connected. (Figure 4) Function control[...]

8 Operating the Touch Screen Touch Software Installation for Microsoft Window s 7 and Window s Vista (Plug and Play) Windows touch and multi-touch gestures are supported in Microsoft Windows 7 Home Premium, Professional, Enterprise, and Ultimate Operating System Editions only. Multi-touch is not supported in Windows 7 Home Basic and Starter Edition[...]

9 Installing the Touch Driver from the CD (for Windows XP only) Insert the CD-ROM into the computer CD-ROM drive. The CD menu is displayed (or open Windows Explorer and run the Touch_Driver_Setup.exe from the CD). 1. Click “ Install Touch Driver for Microsoft Windows XP ” from the CD menu. NOTE: The monitor ships only with Windows XP touch driv[...]

10 3. Click “Finish” The driver setup installation is complete. 4. Click “Yes” After clicking Finish, the setup wizard will prompt you to reboot the computer. Once the system is restarted, the installation is complete . Installing the Touch Driver from the Internet (for Windows XP only) To install the touch driver from the Internet: 1. Go t[...]

11 Control of the Touch Function NOTE: 1. Before using the touch function, make sure the USB cable is connected, the touch applications from the CD are installed (if you are running Windows XP) and the Window's operating system is started. 2. When the touch function is active, make sure there is no foreign object in the areas encircled in the [...]

12 Using the Extended Display Setup Microsoft Windows 7 Operating Systems (Home Premium, Professional, Enterprise and Ultimate Editions) support extended display touch screen functions for two monitors connecte d to one system. 1. Make sure a USB cable is connected from the computer to each monitor. 2. Select Start > Control Panel and change Vie[...]

13 5. Click on the Calibrate… button. Perform a calibration on each monitor separately. NOTE: If you have two monitors that are the same model, be sure to note which model is calibrated first, as both will appear with identical names. Microsoft Windows XP and Windows Vista do not support extended display touch functionality. Microsoft Windows Vis[...]

14 OSD selection Press the Menu button to activate the OSD function menu and continue pressing the Menu button to select an option from the 7 functions in the menu. Select the function you want to adjust on the OSD function menu and then press MENU to make adjustment. Please use <or> to adjust the screen to your desired status. After finishin[...]

15 OSD CONTROL H.OSD POSITION: Controls the OSD menu’s horizontal position. V.OSD POSITION: Controls the OSD menu’s vertical position. OSD TIMEOUT: Determines how long (in seconds) the OSD menu waits before closing automat ically after no action has been performed. OTHER LANGUAGE: OSD menu language selection: ENGLISH,DEUTSCH,FRANCAIS,ESPANOL,IT[...]

16 Troubleshooting Problems Possible solutions Power LED doesn't light up.  Check if the power switch is in the ON position  Make sure the power cord is properly connected No screen image  Check if the power switch is in the ON position  Make sure the power cord is properly connected  Make sure the signal cable is secur ely conn[...]

17 Touch Screen Troubleshooting Tips Problems Possible Solutions Computer does not recover from sleep mode when the touch screen is touched Sleep mode recovery is not supported by the touch screen. Use the keyboard or mouse to recover from the computer ‘s sleep mode. The USB cable is quickly removed from the monitor then reinserted, the touch fun[...]

18 Production Specifications LCD panel size 54.61 cm(21.5in) DCR 3000:1 (typical) Viewing angle Horizontal 170°, vertical 160° (typical) Response time 5 ms (typical) Brightness 265 cd/m 2 (typical) Input signal Analog signal (D-sub); digital signal ( DVI) Display color 16.7 M colors Frequency 24 ~ 83 kHz Horizontal, 50 ~ 76 Hz Vertical Optimum gr[...]

19 Preset Modes Preset Pixel Horz Freq (kHz) Horz Polarity Vert Freq (Hz) Vert Polarity Pixel Clk (MHz) Source 1 640 x 480 31.469 - 59.940 - 25.175 VGA 2 720 x 400 31.469 - 70.087 + 28.322 VGA 3 800 x 600 37.879 + 60.317 + 40.000 VESA 4 1024 x 768 48.363 - 60.004 - 65.000 VESA 5 1280 x 720 45.00 + 60.00 + 74.25 VESA/CEA-861D 6 1280 x 960 60.00 ± 6[...]

20 Appendix Connector pin assignment  15 pin color display signal cable: PIN No. Description PIN No. Description 1. Red 9. +5V 2. Green 10. Logic ground 3. Blue 11. Monitor ground 4. Monitor ground 12. DDC-serial data 5. DDC-return 13. H-sync 6. R-ground 14. V-sync 7. G-ground 15. DDC-serial time sequence 8. B-ground 24 pin DVD-D display signal [...]