Hoshizaki KM-901MWH manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87

Ir a la página of

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Hoshizaki KM-901MWH. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Hoshizaki KM-901MWH o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Hoshizaki KM-901MWH se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Hoshizaki KM-901MWH, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones Hoshizaki KM-901MWH debe contener:
- información acerca de las especificaciones técnicas del dispositivo Hoshizaki KM-901MWH
- nombre de fabricante y año de fabricación del dispositivo Hoshizaki KM-901MWH
- condiciones de uso, configuración y mantenimiento del dispositivo Hoshizaki KM-901MWH
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Hoshizaki KM-901MWH no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Hoshizaki KM-901MWH y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Hoshizaki en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Hoshizaki KM-901MWH, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Hoshizaki KM-901MWH, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Hoshizaki KM-901MWH. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

     Hoshizaki “A Superior Degree of Reliability” www .hoshizaki.com Models KM-901MAH KM-901MWH KM-901MRH/3 Modular Crescent Cuber Hoshizaki America, Inc. S E RV I C E M A N U A L ™ Number: 73156 Issued: 4-18-2008 Revised: 6-23-2009[...]

  • Página 2

     IMPORTANT Only qualied service technicians should install, service, and maintain the icemaker. No service or maintenance should be undertaken until the technician has thoroughly read this Service Manual. Failure to service and maintain the equipment in accordance with this manual may adversely affect safety, performance, component life, and [...]

  • Página 3

    3 IMPORTANT This manual should be read carefully before the icemaker is serviced or maintenance operations are performed. Only qualied service technicians should install, service, and maintain the icemaker. Read the warnings contained in this booklet carefully as they give important information regarding safety. Please retain this booklet for an[...]

  • Página 4

    4 3. Controls and Adjustments ..................................................................................... 3 a) Default Dip Switch Settings ............................................................................. 3 b) Harvest Timer (S4 dip switch  & ) ................................................................ 3?[...]

  • Página 5

    5 V. Removal and Replacement of Components ................................................................... 68 A. Service for Refrigerant Lines ...................................................................................... 68 . Refrigerant Recovery .......................................................................................[...]

  • Página 6

    6 Important Safety Information Throughout this manual, notices appear to bring your attention to situations which could result in death, serious injury, or damage to the unit. WARNING Indicates a hazardous situation which could result in death or serious injury. CAUTION Indicates a situation which could result in damage to the unit. IMPORTANT Indic[...]

  • Página 7

    7 I. Specications A. Icemaker 1a. KM-901MAH (air-cooled) Auxiliary Code T-0, U-0 Note: We reserve the right to make changes in specications and design without prior notice. AC SUPPLY VOLTAGE 208-230/60/1 (3 wire with netrual for 115V) AMPERAGE 11.4 A ( 5 Min. Freeze AT 104°F / WT 80°F) MINIMUM CIRCUIT AMPACITY 20 A MAXIMUM FUSE SIZE 20 A AP[...]

  • Página 8

    8 1b. KM-901MAH (air-cooled) Auxiliary Code U-1 and Later AC SUPPLY VOLTAGE 208-230/60/1 (3 wire with netrual for 115V) AMPERAGE 11.4 A ( 5 Min. Freeze AT 104°F / WT 80°F) MINIMUM CIRCUIT AMPACITY 20 A MAXIMUM FUSE SIZE 20 A APPROXIMATE ICE PRODUCTION Ambient WATER TEMP. (°F) PER 24 HR. Temp.(°F) 50 70 90 lbs./day ( kg/day ) 70 *874 (396) 832 ([...]

  • Página 9

    9 2a. KM-901MWH (water-cooled) Auxiliary Code T-0, U-0 Note: We reserve the right to make changes in specications and design without prior notice. AC SUPPLY VOLTAGE 208-230/60/1 (3 wire with netrual for 115V) AMPERAGE 8.7A ( 5 Min. Freeze AT 104°F / WT 80°F) MINIMUM CIRCUIT AMPACITY 15 A MAXIMUM FUSE SIZE 15 A APPROXIMATE ICE PRODUCTION Ambien[...]

  • Página 10

    0 2b. KM-901MWH (water-cooled) Auxiliary Code U-1 and Later AC SUPPLY VOLTAGE 208-230/60/1 (3 wire with netrual for 115V) AMPERAGE 8.7A ( 5 Min. Freeze AT 104°F / WT 80°F) MINIMUM CIRCUIT AMPACITY 15 A MAXIMUM FUSE SIZE 15 A APPROXIMATE ICE PRODUCTION Ambient WATER TEMP. (°F) PER 24 HR. Temp.(°F) 50 70 90 lbs./day ( kg/day ) 70 *912 (414) 88[...]

  • Página 11

     3a. KM-901MRH (remote air-cooled) Auxiliary Code T-0, U-0 Note: We reserve the right to make changes in specications and design without prior notice. AC SUPPLY VOLTAGE 208-230/60/1 (3 wire with netrual for 115V) AMPERAGE 11.6A ( 5 Min. Freeze AT 104°F / WT 80°F) MINIMUM CIRCUIT AMPACITY 20 A MAXIMUM FUSE SIZE 20 A APPROXIMATE ICE PRODUC[...]

  • Página 12

     3b. KM-901MRH (remote air-cooled) Auxiliary Code U-1 and Later AC SUPPLY VOLTAGE 208-230/60/1 (3 wire with netrual for 115V) AMPERAGE 11.6A ( 5 Min. Freeze AT 104°F / WT 80°F) MINIMUM CIRCUIT AMPACITY 20 A MAXIMUM FUSE SIZE 20 A APPROXIMATE ICE PRODUCTION Ambient WATER TEMP. (°F) PER 24 HR. Temp.(°F) 50 70 90 lbs./day ( kg/day ) 70 *889 [...]

  • Página 13

    3 4a. KM-901MRH3 (remote air-cooled) Auxiliary Code T-0, U-0 Note: We reserve the right to make changes in specications and design without prior notice. AC SUPPLY VOLTAGE 208-230/60/3 AMPERAGE 7.0A ( 5 Min. Freeze AT 104°F / WT 80°F) MINIMUM CIRCUIT AMPACITY 20 A MAXIMUM FUSE SIZE 20 A APPROXIMATE ICE PRODUCTION Ambient WATER TEMP. (°F) PE[...]

  • Página 14

    4 4b. KM-901MRH (remote air-cooled) Auxiliary Code U-1 and Later AC SUPPLY VOLTAGE 208-230/60/3 AMPERAGE 7.0A ( 5 Min. Freeze AT 104°F / WT 80°F) MINIMUM CIRCUIT AMPACITY 20 A MAXIMUM FUSE SIZE 20 A APPROXIMATE ICE PRODUCTION Ambient WATER TEMP. (°F) PER 24 HR. Temp.(°F) 50 70 90 lbs./day ( kg/day ) 70 *899 (408) 874 (397) 817 (371) Referenc[...]

  • Página 15

    5 B. Condenser Unit 1. URC-9F Unit: mm [in.][...]

  • Página 16

    6 Specications MODEL: URC-9F Note: We reserve the right to make changes in specications and design without prior notice. AC SUPPLY VOLTAGE 115/60/1 (Connection to Icemaker) FAN MOTOR 115 V Total 1.3FLA 65W EXTERIOR DIMENSIONS (WxDxH) 32-3/16" x 15-11/16" x 21-15/16" (817 x 398 x 558 mm) DIMENSIONS INCLUDING LEGS (WxDxH) 34-5[...]

  • Página 17

    7 II. General Information A. Construction 1. KM-901MAH (air-cooled) Thermostatic Bin Control Auxiliary Code T-0, U-0 Water Supply Inlet Condenser Drier Control Box Spray Tubes Control Switch Water Pump Float Switch Compressor Expansion Valves Fan Motor Hot Gas Valve Thermostatic Bin Control Bracket & Bulb Holder Auxiliary Code T-0, U-0 Clean[...]

  • Página 18

    8 2. KM-901MWH (water-cooled) Water Supply Inlet Condenser Drier Control Box Spray Tubes Control Switch Water Pump Float Switch Compressor Expansion Valves Water Regulating Valve Hot Gas Valve Junction Box Cleaning Valve Thermostatic Bin Control Auxiliary Code T-0, U-0 Thermostatic Bin Control Bracket & Bulb Holder Auxiliary Code T-0, U-0 Me[...]

  • Página 19

    9 3. KM-901MRH/3 (remote air-cooled) Receiver Tank Water Supply Inlet Junction Boxes Drier Control Box Spray Tubes Control Switch Water Pump Float Switch Compressor Expansion Valves Hot Gas Valve Liquid Line Valve Cleaning Valve Thermostatic Bin Control Auxiliary Code T-0, U-0 Thermostatic Bin Control Bracket & Bulb Holder Auxiliary Code T-0[...]

  • Página 20

    0 B. Sequence of Operation 1. Sequence Cycles and Shutdown a) "E" Control Board: Auxiliary Code T-0, U-0 The steps in the sequence are as outlined below. When power is supplied, CB red "POWER OK" LED comes on. There is a 5-second delay before startup. Note that the order of the component LEDs from the outer edge of CB is ,[...]

  • Página 21

     (5) Harvest Cycle Same as the initial harvest cycle. See "II.B..a)() Initial Harvest Cycle." Note: Unit continues to cycle until TBC is satised or power is turned off. The unit always restarts at the -minute ll cycle. (6) Shutdown When ice contacts the thermostatic bulb (TBC switch open), TBC shuts down the unit with[...]

  • Página 22

     (3) Freeze Cycle LED  is on. Comp and FMR remain energized, PM, FM, and LLV energize. HGV and WV de-energize. For the rst 5 minutes, CB will not accept a signal from F/S. This minimum 5-minute freeze time is short cycle protection for Comp. At the end of 5 minutes, F/S assumes control. As ice builds on the evaporator, the water level i[...]

  • Página 23

    3 (6) Shutdown When MBC is activated (MBC open), the yellow "BC OPEN" LED comes on. The unit then shuts down as outlined in the table below. Cycle at Mechanical Bin Control Activation Shutdown Fill Cycle 5 seconds after activation. Harvest Cycle At the end of the harvest cycle, or up to 5 seconds into the freeze cycle if activate[...]

  • Página 24

    4 2. Sequence Flow Chart a) "E" Control Board: Auxiliary Code T-0, U-0 4. Pump-Out Cycle • Factory set for every 0th cycle (S4 dip switch 5 & 6) • Pump motor stops for  sec., then reverses for 0/0 sec. (S4 dip switch 3 & 4) F/S Check Components Energized when the Control Switch is in the "WASH" Positio[...]

  • Página 25

    5 b) "G" Control Board: Auxiliary Code U-1 and Later • WV time: 6 min. or the length of harvest minus 0 or 50 sec. (S4 dip switch 7), whichever is shorter. DO NOT ADJUST S4 dip switch 7 on this model. • Maximum harvest time: 0 min. F/S check  to 3-min. timer in control (S4 dip switch  & ) Legend: Comp –compressor [...]

  • Página 26

    6 C. Control Board • A Hoshizaki exclusive solid-state control board is employed in KM-90MAH, KM-90MWH, and KM-90MRH/3 Modular Crescent Cubers. • All models are pretested and factory set. CAUTION . The control board is fragile; handle very carefully. . The control board contains integrated circuits, which are susceptible to fa[...]

  • Página 27

    7 1. Control Board Layout a) "E" Control Board: Auxiliary Code T-0, U-0 "E" Control Board Part Number A40-0 (factory); 2A1410-02 (service) "E" Control Board "OUTPUT TEST" Button (used to test relays on control board) WHITE K3 Connector Harvest Control (thermistor) RED K4 Connector Mechanical Bi[...]

  • Página 28

    8 "G" Control Board Part Number A379-0 "G" Control Board "ALARM RESET" Button "OUTPUT TEST" Button (used to test relays on control board) WHITE K3 Connector Harvest Control (thermistor) RED K4 Connector Mechanical Bin Control or K4 Jumper (thermostatic bin control application) Label (control board[...]

  • Página 29

    9 2. Features a) Maximum Water Supply Period - 6 minutes "E" control board: The inlet water valve is open during harvest for 6 minutes or the length of harvest, whichever is shorter. "G" control board: The inlet water valve is open during harvest for 6 minutes or the length of harvest minus 0 or 50 seconds (harvest pump timer[...]

  • Página 30

    30 f) LED Lights and Audible Alarm Safeties (1) "E" Control Board: Auxiliary Code T-0, U-0 At startup, a 5-second delay occurs while the control board conducts an internal timer check. A beep occurs when power is turned off. The red LED indicates proper control voltage and remains on unless a control voltage problem occurs. The green LEDs[...]

  • Página 31

    3 (2) "G" Control Board: Auxiliary Code U-1 and Later At startup, a 5-second delay occurs while the control board conducts an internal timer check. A beep occurs when the control switch is moved to the "ICE" position. The red LED indicates proper control voltage and remains on unless a control voltage problem occurs. The gree[...]

  • Página 32

    3 3. Controls and Adjustments CAUTION Dip switches are factory set. Failure to maintain factory settings may adversely affect performance and warranty coverage. For more information, contact Hoshizaki Technical Support at -800-33-940. a) Default Dip Switch Settings The dip switches are factory set to the following positions: S4 Dip Swit[...]

  • Página 33

    33 c) Pump-Out Timer (S4 dip switch 3 & 4) When a pump-out is called for, the pump motor de-energizes after the preceding freeze cycle. The pump motor energizes  seconds later in the reverse direction, taking water from the bottom of the tank and forcing pressure against the check valve seat allowing water to go through the check valve and d[...]

  • Página 34

    34 e) Bin Control Selector/Harvest Pump Timer (S4 dip switch 7) Depending on the control board, S4 dip switch 7 is either a bin control selector or harvest pump timer. CAUTION Do not adjust. This dip switch must be left in the factory default position or this unit will not operate correctly. (1) Bin Control Selector, "E" Control Board: Au[...]

  • Página 35

    35 g) Freeze Timer (S4 dip switch 9 & 10) CAUTION Adjust to proper specication, or the unit may not operate correctly. The freeze timer setting determines the maximum allowed freeze time to prevent possible freeze-up issues. Upon termination of the freeze timer, the control board initiates the harvest cycle. After  consecutive freeze time[...]

  • Página 36

    36 D. Bin Control 1. Thermostatic Bin Control: Auxiliary Code T-0, U-0 CAUTION When the ambient temperature is below 45°F (7°C), the thermostatic bin control switch opens and shuts down the icemaker even if the ice storage bin is empty. When the thermostat is set in the prohibited range, the icemaker operates continuously even if the ice storage [...]

  • Página 37

    37 III. Technical Information A. Water Circuit and Refrigeration Circuit 1. KM-901MAH (air-cooled) Water Supply Cleaning Valve Float Switch Drain Check Valve Expansion Valves Compressor Hot Gas Valve Check Valves High Pressure Switch Strainer Fan Drier Condenser Evaporator Access Valve Discharge Line Suction Line Water Pump Thermistor Spray Tubes I[...]

  • Página 38

    38 2. KM-901MWH (water-cooled) Water Supply Cleaning Valve Float Switch Drain Check Valve Expansion Valves Compressor Hot Gas Valve Check Valves High Pressure Switch Strainer Water Regulating Valve Drier Condenser Evaporator Access Valve Discharge Line Suction Line Water Pump Thermistor Spray Tubes Inlet Water Valve Freeze Pump-Out Water Tank Acces[...]

  • Página 39

    39 3. KM-901MRH/3 (remote air-cooled) Water Supply Cleaning Valve Float Switch Drain Check Valve Expansion Valves Compressor Hot Gas Valve Check Valves High Pressure Switch Strainer Fan Drier Condenser Evaporator Access Valve Discharge Line Suction Line Water Pump Thermistor Spray Tubes Inlet Water Valve Freeze Pump-Out Water Tank Access Valve Refr[...]

  • Página 40

    40 B. Wiring Diagrams 1. Thermostatic Bin Control: Auxiliary Code T-0, U-0 a) KM-901MAH (air-cooled) and KM-901MWH (water-cooled) * Transformer Output 0.5V at 5V * High Pressure Switch Air-Cooled Model Water-Cooled Model Cut-out 4±  PSIG 384±  PSIG Cut-in 37± PSIG 84± PSIG 0 0 Thermostatic Bin Contro[...]

  • Página 41

    4 b) KM-901MRH (remote air-cooled) * High Pressure Switch Cut-out 4±  PSIG Cut-in 37± PSIG 0 * Transformer Output 0.5V at 5V Thermostatic Bin Control: Auxiliary Code T-0, U-0[...]

  • Página 42

    4 c) KM-901MRH3 (remote air-cooled) * High Pressure Switch Cut-out 4±  PSIG Cut-in 37± PSIG 0 * Transformer Output 0.5V at 5V Thermostatic Bin Control: Auxiliary Code T-0, U-0[...]

  • Página 43

    43 2. Mechanical Bin Control: Auxiliary Code U-1 and Later a) KM-901MAH (air-cooled) and KM-901MWH (water-cooled) Mechanical Bin Control: Auxiliary Code U- and Later * Transformer Output 0.5V at 5V * High Pressure Switch Air-Cooled Model Water-Cooled Model Cut-out 4±  PSIG 384±  PSIG Cut-in 37± PSIG 84±[...]

  • Página 44

    44 b) KM-901MRH (remote air-cooled) * High Pressure Switch Cut-out 4±  PSIG Cut-in 37± PSIG 0 * Transformer Output 0.5V at 5V Mechanical Bin Control: Auxiliary Code U- and Later[...]

  • Página 45

    45 c) KM-901MRH3 (remote air-cooled) Mechanical Bin Control: Auxiliary Code U- and Later * Transformer Output 0.5V at 5V * High Pressure Switch Cut-out 4±  PSIG Cut-in 37± PSIG 0[...]

  • Página 46

    46 C. Performance Data 1. KM-901MAH (air-cooled) Note: . Pressure data is recorded at 5 minutes into freeze cycle. The data not in bold should be used for reference only. . We reserve the right to make changes in specications and design without prior notice. 70/21 874 396 832 378 785 356 80/27 842 382 778 353 736 334 90/32 832 378 732 332 [...]

  • Página 47

    47 Note: . Pressure data is recorded at 5 minutes into freeze cycle. The data not in bold should be used for reference only. . We reserve the right to make changes in specications and design without prior notice. 2. KM-901MWH (water-cooled) 70/21 912 414 889 403 849 385 80/27 895 406 860 390 815 370 90/32 889 403 835 379 791 359 lbs./day k[...]

  • Página 48

    48 3. KM-901MRH (remote air-cooled) Note: . Pressure data is recorded at 5 minutes into freeze cycle. The data not in bold should be used for reference only. . We reserve the right to make changes in specications and design without prior notice. 70/21 889 403 859 389 803 364 80/27 866 393 818 371 755 343 90/32 859 389 785 356 724 328 lbs./[...]

  • Página 49

    49 Note: . Pressure data is recorded at 5 minutes into freeze cycle. The data not in bold should be used for reference only. . We reserve the right to make changes in specications and design without prior notice. 4. KM-901MRH3 (remote air-cooled) 70/21 899 408 874 397 817 371 80/27 880 399 842 382 772 350 90/32 874 397 815 370 749 340 lbs.[...]

  • Página 50

    50 IV. Service Diagnosis WARNING . This unit should be diagnosed and repaired only by qualied service personnel to reduce the risk of death, electric shock, serious injury, or re. . Risk of electric shock. Use extreme caution and exercise safe electrical practices. 3. Moving parts (e.g., fan blade) can crush and cut. Keep hands clear. 4[...]

  • Página 51

    5 3) 1-Minute Fill Cycle – LED 4 is on. WV energizes. After  minute, CB checks for a closed F/S. If F/S is closed, the harvest cycle begins. If closed, continue to step 4. If open, WV remains energized through additional -minute ll cycles until water lls the tank and closes F/S (low water safety). Diagnosis: If WV does not open, ch[...]

  • Página 52

    5 5) Freeze Cycle – LED 1 is on. Comp and FMR remain energized, PM, LLV, and FM energize. WV and HGV de-energize. The unit is held in freeze by a 5-minute short cycle protection timer (CB will not accept a signal from F/S). After the 5-minute short cycle protection timer expires, CB turns freeze termination over to F/S. Diagnosis: During the ?[...]

  • Página 53

    53 7) Normal Harvest Cycle – same as the initial harvest cycle – See "IV.A.4) Initial Harvest Cycle." 8) Shutdown a) Thermostatic Bin Control: Auxiliary Code T-0, U-0 When the unit is running hold ice in contact with the thermostatic bulb, TBC switch opens within 0 seconds, shutting down the unit. TBC is factory set, and generally [...]

  • Página 54

    54 3) The "OUTPUT TEST" button provides a relay sequence test. Make sure the control switch is in the "ICE" position, then press the "OUTPUT TEST" button. For the correct lighting sequence, see the table below. Note that the order of the LEDs from the outer edge of the control board is , 4, 3, . Components (e.g.,[...]

  • Página 55

    55 2. Mechanical Bin Control Check and Cleaning: Auxiliary Code U-1 and Later a) Mechanical Bin Control Check To check the mechanical bin control switch, follow the steps below. ) Turn off the power supply. ) Remove the front panel, then move the control switch to the "OFF" position. 3) Remove the control box cover, then clear any i[...]

  • Página 56

    56 b) Mechanical Bin Control Cleaning Scale may build up on the mechanical bin control. Scale can cause the actuator paddle and magnet to stick. In this case, the mechanical bin control should be cleaned. WARNING CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are securely in place after the unit is serviced. Make sure that none h[...]

  • Página 57

    57 D. Float Switch Check and Cleaning 1. Float Switch Check To check the oat switch, follow the steps below. ) Turn off the power supply. ) Remove the front panel and move the control switch to the "OFF" position. 3) Remove the base cover, then disconnect one end of the pump tubing to drain the water tank. See Fig. . After the[...]

  • Página 58

    58 2. Float Switch Cleaning Depending on local water conditions, scale may build up on the oat switch. Scale on the switch can cause the oat to stick. In this case, the oat switch should be cleaned. ) Turn off the power supply. ) Remove the front panel, then move the control switch to the "OFF" position. 3) Remove the base [...]

  • Página 59

    59 E. Thermistor Check To check thermistor resistance, follow the steps below. ) Turn off the power supply. ) Remove the front panel, then move the control switch to the "OFF" position. 3) Remove the control box cover. 4) Remove the thermistor. See "V.L. Removal and Replacement of Thermistor." 5) Immerse the thermistor sen[...]

  • Página 60

    60 F. Diagnostic Charts 1. No Ice Production Problem Possible Cause Remedy [] The icemaker will not start. a) Power Supply . Off, blown fuse, or tripped breaker. . Turn on, replace, or reset. . Loose connection. . Tighten. 3. Bad contacts. 3. Check for continuity and replace. 4. Not within specications. 4. Refer to nameplate and c[...]

  • Página 61

    6 Problem Possible Cause Remedy [] The icemaker will not start. (continued) h) Transformer . Coil winding open or shorted. . Replace. i) Wiring to Control Board . Loose connections or open. . Check for continuity and replace. j) Interlock Switch (Cleaning Valve) . Open position. . Move to closed position. . Bad contacts. [...]

  • Página 62

    6 Problem Possible Cause Remedy [3] Compressor will not start or stops operating. a) Magnetic Contactor . Bad contacts. . Check for continuity and replace. . Coil winding open. . Replace. b) Start Capacitor or Run Capacitor . Defective. . Replace. c) Internal Overload Protector Open (check  through 3 to the right and d throu[...]

  • Página 63

    63 Problem Possible Cause Remedy [7] Fan motor will not start, or is not operating (except water-cooled model). a) Fan Motor . Motor winding open. . Replace. . Bearing worn out. . Replace. 3. Wiring to fan motor. 3. Check for loose connection or open, and replace. 4. Defective capacitor. 4. Replace. 5. Fan blade bound. 5. Check and repl[...]

  • Página 64

    64 Problem Possible Cause Remedy [] Freeze cycle time is too long. (continued) f) Thermistor . Disconnected, loose, or defective. . Connect, secure, check. See "V.L. Removal and Replacement of Thermistor." g) Refrigerant . Low charge. . Check for leaks. Recover, repair, evacuate, and recharge. h) Expansion Valve . Bulb l[...]

  • Página 65

    65 Problem Possible Cause Remedy [] All ice formed on evaporator does not fall into bin in harvest cycle. (continued) l) Refrigerant . Low charge. . Check for leaks. Recover, repair, evacuate, and recharge. m) Water Regulating Valve (water-cooled model) . Leaking by in harvest. . Check and replace. [3] Other. a) Ice Cube Guide . O[...]

  • Página 66

    66 Problem Possible Cause Remedy [] Freeze cycle time is long. (continued) n) Control Board . Float switch connection loose (K5). . Check and reconnect. . Defective. . See "IV.B. Control Board Check." [] Harvest cycle time is long. a) Water Supply . Water temperature too cold. . Increase temperature. b) Thermistor [...]

  • Página 67

    67 Problem Possible Cause Remedy [] Cloudy or irregular cubes. a) Evaporator . Frozen up. . See chart . . Scaled up. . Clean 3. Damaged. 3. Replace. b) Water System . Water supply line too small; requires 3/8" OD line dedicated per machine. . Increase water line size. . Water lter clogged or ow rate too small. [...]

  • Página 68

    68 V. Removal and Replacement of Components WARNING . This unit should be diagnosed and repaired only by qualied service personnel to reduce the risk of death, electric shock, serious injury, or re. . Move the control switch to the "OFF" position and turn off the power supply before servicing. 3. CHOKING HAZARD: Ensure all com[...]

  • Página 69

    69 2. Brazing WARNING . R-404A itself is not ammable at atmospheric pressure and temperatures up to 76°F (80°C). . R-404A itself is not explosive or poisonous. However, when exposed to high temperatures (open ames), R-404A can be decomposed to form hydrouoric acid and carbonyl uoride both of which are hazardous. 3. Do not use[...]

  • Página 70

    70 4) Close the low-side valve and high-side valve on the gauge manifold. 5) Disconnect the gauge manifold hose from the vacuum pump and attach it to a refrigerant service cylinder. Remember to loosen the connection and purge the air from the hose. For air-cooled and water-cooled models, see the nameplate for the required refrigerant charge. For re[...]

  • Página 71

    7 8) Attach the rubber grommets of the prior compressor to the new compressor. 9) Place the compressor in position and secure it using the bolts and washers. 0) Remove the drier, then place the new drier in position. ) Remove the plugs from the suction, discharge, and process pipes. ) Braze all ttings while purging with nitroge[...]

  • Página 72

    7 8) Use an electronic leak detector or soap bubbles to check for leaks. Add a trace of refrigerant to the system (if using an electronic leak detector), and then raise the pressure using nitrogen gas (40 PSIG). DO NOT use R-404A as a mixture with pressurized air for leak testing. 9) Evacuate the system, and charge it with refrigerant. For ai[...]

  • Página 73

    73 0) Evacuate the system, and charge it with refrigerant. For air-cooled and water-cooled models, see the nameplate for the required refrigerant charge. For remote air-cooled models, see the rating label inside the icemaker. ) Replace the solenoid in its correct position. ) Replace the panels in their correct positions. 3) Turn o[...]

  • Página 74

    74 F. Removal and Replacement of Air-Cooled Condenser CAUTION . Always install a new drier every time the sealed refrigeration system is opened. . Do not replace the drier until after all other repair or replacement has been made. Install the new drier with the arrow on the drier in the direction of the refrigerant ow. 3. When brazing, pro[...]

  • Página 75

    75 G. Removal and Replacement of Water-Cooled Condenser CAUTION . Always install a new drier every time the sealed refrigeration system is opened. . Do not replace the drier until after all other repair or replacement has been made. Install the new drier with the arrow on the drier in the direction of the refrigerant ow. 3. When brazing, p[...]

  • Página 76

    76 H. Removal and Replacement of Remote Air-Cooled Condenser CAUTION . Always install a new drier every time the sealed refrigeration system is opened. . Do not replace the drier until after all other repair or replacement has been made. Install the new drier with the arrow on the drier in the direction of the refrigerant ow. 3. When brazi[...]

  • Página 77

    77 I. Removal and Replacement of Water Regulating Valve (water-cooled model) CAUTION . Always install a new drier every time the sealed refrigeration system is opened. . Do not replace the drier until after all other repair or replacement has been made. Install the new drier with the arrow on the drier in the direction of the refrigerant o[...]

  • Página 78

    78 Fig. 4 Adjustment Screw CW – Higher CCW – Lower Top View 8) Check for water leaks. 9) Replace the panels in their correct positions. 0) Turn on the power supply. J. Adjustment of Water Regulating Valve (water-cooled model) The water regulating valve (also called "water regulator") is factory set, and generally no adjustmen[...]

  • Página 79

    79 8) Braze all ttings with nitrogen gas owing at a pressure of 3 to 4 PSIG. 9) Use an electronic leak detector or soap bubbles to check for leaks. Add a trace of refrigerant to the system (if using an electronic leak detector), and then raise the pressure using nitrogen gas (40 PSIG). DO NOT use R-404A as a mixture with pressurized air fo[...]

  • Página 80

    80 0) Secure the insulation using plastic cable ties. ) Connect the white thermistor connector through the bushing of the control box to the control board WHITE K3 connector. Note: Do not cut the leads of the thermistor. ) Replace the control box cover and the panels in their correct positions. 3) Turn on the power supply. M. Remo[...]

  • Página 81

    8 ) Replace the front panel in its correct position. 3) Turn on the power supply. O. Removal and Replacement of Pump Motor ) Turn off the power supply. ) Remove the front panel. 3) Remove the base cover, then disconnect one end of the pump tubing to drain the water tank. See Fig. 6. After the water tank has drained, reconnect the [...]

  • Página 82

    8 P. Removal and Replacement of Control Board When replacing a control board follow the precautions below. CAUTION . The control board is fragile; handle very carefully. . The control board contains integrated circuits, which are susceptible to failure due to static discharge. It is especially important to touch the metal part of the unit [...]

  • Página 83

    83 VI. Cleaning and Maintenance WARNING CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are securely in place after any cleaning or maintenance is done to the unit. Make sure that none have fallen into the storage bin. A. Cleaning and Sanitizing Instructions Hoshizaki recommends cleaning and sanitizing this unit at least once a ye[...]

  • Página 84

    84 1. Cleaning Procedure ) Dilute 6 . oz. (473 ml) of the recommended cleaner Hoshizaki "Scale Away" or "LIME-A-WAY" (Economics Laboratory, Inc.) with 3 gal. ( l) of warm water. ) Remove all ice from the evaporator and the storage bin. Note: To remove cubes on the evaporator, turn off the power supply and turn [...]

  • Página 85

    85 9) Turn off the power supply after 3 minutes. 0) Remove the front panel and fully open the cleaning valve. ) Move the control switch to the "WASH" position. ) Replace the front panel in its correct position. 3) Turn on the power supply to rinse off the cleaning solution. 4) Turn off the power supply after 5 minu[...]

  • Página 86

    86 B. Maintenance This icemaker must be maintained individually, referring to the instruction manual and labels provided with the icemaker. WARNING . Only qualied service technicians should attempt to service or maintain this icemaker. . Disconnect power before performing service or maintenance. 1. Stainless Steel Exterior To prevent corro[...]

  • Página 87

    87 5) Attach a compressed air or carbon dioxide supply to the icemaker water supply line drain valve. 6) Move the control switch to the "ICE" position. 7) Replace the front panel in its correct position, then turn on the power supply. 8) Blow the icemaker water supply line out using the compressed air or carbon dioxide supply. 9) Close th[...]