FujiFilm 1400 Zoom manual

   [...]

2 3 We Name : Fuji Photo Film ( Europe ) G.m.b.H. Address : Heesenstrasse 31 40549 Dusseldorf, Germany declare that the product Product Name : DIGITAL CAMERA FUJIFILM FinePix1400 ZOOM Manufacture's Name : Fuji Photo Film Co., Ltd. Manufacture's Address : 26 - 30, Nishiazabu 2 - chome, Minato - ku, Tokyo 106 - 8620, Japan is in conformity [...]

5 ADJUSTING THE LCD MONITOR BRIGHTNESS ...................................................... 67 System Expansion Options .......................... 68 Using the USB Interface Set ....................... 69 Accessories Guide ........................................ 71 Notes on Using Your Camera Correctly ..... 73 Notes on the Power Supply .........[...]

7 Camera Features and Accessories ● High-quality images from the 1.31-million-pixel CCD and high-resolution Fujinon lens ● Records images at resolutions of up to 1280 ✕ 960 pixels ● Compact, lightweight body ● 1.6-inch color LCD monitor ● Wide-angle field of view with Macro ● Built-in automatic flash with precise wide-range flash cont[...]

9 8 Nomenclature ✽ Refer to the pages in parentheses for information on using the camera features. Shutter button (P.22) Viewfinder window SmartMedia slot Photography mode (P.19, 63) DC IN 5V (Power input) socket (P.13) DISP button (P.19) MENU/EXE button LCD monitor (P.19, 25) Battery cover (P.12) “ dc ” Button Viewfinder CANCEL/BACK button e[...]

11 1 Pass the loop of thin cord on the end of the strap through the strap mount. Then pass the other end of the strap through the loop of thin cord and pull the strap tight. 1 2 10 Example of LCD Monitor Text Display : Shooting Playback framenumber AF frame Standby (ready to shoot) Mode Camera shake warning Battery low warning Macro Flash mode sett[...]

13 1 12 SELECTING THE POWER SUPPL Y 1 Using Batteries Use 4 AA-size alkaline, Ni-MH or Ni-Cd batteries. Do not use different types of batteries together. ■ Number of available shots (with fully charged batteries) The table below provides a guide to the number of shots that can be taken at normal temperature with 50% flash use. Note that these fig[...]

15 1 14 ➀ Check that the camera is switched off and then open the slot cover in the direction of the arrow. ➁ Push the SmartMedia firmly into the SmartMedia slot as far as it will go. ➂ Close the slot cover. LOADING AND REMOVING THE SmartMedia ™ SmartMedia TM Loding the SmartMedia TM Removing the SmartMedia TM ● ! If you open the slot cov[...]

17 1 1 SETTING THE DA TE AND TIME ➀ Use the “ ab ” button to select “DATE / TIME”, and ➁ press the “MENU/ EXE” button. ● ! If you take the batteries out of the camera for 5 minutes or more, or remove the batteries during setup, the camera settings may all revert to the factory default values. ● ! See P.63 for more information on[...]

19 2 1 ➀ Slide the lens cover sideways until it stops. ➁ When you set the Mode switch to “ E ”, the lens extends. To take pictures using the viewfinder (excluding Macro Photography), To use the LCD monitor to take photographs, press the “DISP” button to switch the LCD monitor on (See P.27). Loop the strap over your wrist, brace your elb[...]

21 2 20 Using the viewfinder or LCD monitor, frame your shot so that the subject fills the entire AF (Auto Focus) frame. ● ! If the subject is not in the AF frame, use AF/AE lock to take the picture ( ➡ P.25). ● ! In dimly lit scenes where the subject is difficult to see using the LCD monitor, use the viewfinder to take the picture. ● ! Sho[...]

23 2 22 7 To take the picture, press the shutter button down fully without lifting your finger off it. The camera beeps and takes the picture, and the data is then recorded. ● ! While the image data is being recorded, the viewfinder indicator turns orange and you cannot take pictures. Do not switch the camera off or open the battery cover or slot[...]

24 25 2 In a picture of this type, the subjects (people in this case) are outside the AF frame. If you take the picture at this point, the subjects will not be in focus. Move the camera slightly so that only one of the subjects are shown in the AF frame. 1 2 Number of available frames The number of available shots is displayed on the LCD monitor in[...]

27 2 26   2 In Auto mode, the LCD monitor display changes each time you press the “DISP” button. Press the “DISP” button to display the “Framing Guideline”. Use the “ d ” and “ c ” buttons to select one of the three framing guidelines. The framing guideline help you to compose your shot when you are taking pictures using t[...]

29 2 28 1 Set the Mode switch to “ D ”. ● ! When the Mode switch is set to “ D ”, the photographed image is displayed after you take the shot. ● ! When you close the lens cover, the lens automatically retracts. If you close the lens cover when the Mode swotch is set to “ D ” , the screen display may go blank for a moment. ● ! If i[...]

 31 2 30 ➀ Use the “ d ” and “ c ” buttons to display the image you want to zoom. ➁ Use the “ ab ” button to set the zoom scale. After you have zoomed in on your image, ➀ press the “DISP” button. ➁ You can use the “ dc ” and “ ab ” buttons to zoom in on different parts of the image. ● ! Zoom scales up to 4.0 ✕[...]

33 2 32  4 Use the “ d ” and “ c ” buttons to display the image to be erased. Press the “MENU/ EXE” button to erase the displayed image. When erasing is complete, the next image appears and the “ ” message is displayed. ● ! To end frame erasing, press the “CANCEL / BACK” button. ● ! To continue erasing images, repeat the [...]

35 3 34 Use this mode for ordinary photography. The flash fires automatically as required by the conditions. Auto Flash (no icon) You can choose from 5 flash modes to suit your shot. Each time you press the “ e ” flash button, the flash mode shown on the LCD monitor changes from Auto flash (no icon displayed) to “ o ” to “ e ” to “ p [...]

37 3 36 i MACRO ( CLOSE-UP ) PHOTOGRAPHY ➀ Press the “ MENU/ EXE” button to switch to the menu screen. ➁ Use the “ d ” or “ c ” button to select “ i MACRO” and then use the “ ab ” button to select ON and switch to Macro Photography. When you switch to “ i MACRO”, the lens automatically moves to the extreme wide- angle l [...]

39 3 Press the “MENU/ EXE” button to switch to the menu screen. Use the “ dc ” button to select “ B SELF-TIMER” and then select “ON” with the “ ab ” button to switch the camera to self-timer photography. Other settings can be changed at this point. Finally, press the “MENU/ EXE” button to return to the photography screen. ?[...]

41 3 ➀ Press the “MENU/ EXE” button to switch to the menu screen. ➁ Use the “ d ” or “ c ” button to select MODE and then use the “ ab ” button to select “ E MANUAL”. ➂ Press the “MENU/ EXE” button to switch to Manual photography. ● ! Each time you press the “DISP” button, the display status switches from “Show[...]

43 3 42 a Setting the White Balance Change the white balance setting when you want to take a picture with the white balance fixed for the surroundings and lighting when the picture is taken. In Auto mode, the correct white balance may not be obtained for subjects such as close-ups of people's faces and shots taken under a special light source.[...]

45 4 This section introduces a range of functions that you can access when the Mode switch is set to “ D ”. The explanations below all presuppose that the Mode switch is set to “ D ”. If there is a power socket handy, use the special AC Power Adapter AC-5V (sold separately) so there is no need to worry about the batteries running out during[...]

47 4 46  A confirmation screen appears. If you are erasing all the frames or formatting the card, press the “MENU/ EXE” button to proceed. If you are erasing one frame, use the “ d ” and “ c ” buttons to select the frame and then press the “MENU/ EXE” button. 3  If you press the “MENU/ EXE” button, the menu screen will app[...]

 49 4 48  Use the “ d ” or “ c ” button to select the image to be protected. When the “MENU/ EXE” button is pressed, the image is protected and the “ h ” icon appears on the right of the screen. To remove the protection, press the “MENU/ EXE” button again. To finish setting and removing single-frame protection, press the ?[...]

51 4 50 A confirmation screen will appear to proceed, press the “MENU/ EXE” button.  3  Press the “MENU/ EXE” button to display the menu on the LCD monitor. ● ! Press the “CANCEL / BACK” button to exit the menu display. ➀ Use the “ d ” or “ c ” button to select “ g PROTECT”. ➁ Use the “ ab ” button to select [...]

53 4 52 ➀ Use the “ d ” or “ c ” button to display the image to be resized on the LCD monitor. ➁ Press the “MENU/ EXE” button to display the menu. ➀ Select “ j RESIZE” (resize). ➁ Use the “ ab ” button to select the desired image size. ➂ Press the “MENU/ EXE” button. 2 1 ● ! You can only select sizes that are val[...]

55 4 2 This function allows you to select whether or not the date of shooting is included on the print. ➀ Set the Mode Swich to “ D ”. ➁ Press the “MENU/ EXE” button to display the menu on the LCD monitor. ➂ Press “ dc ” button to select “ R DPOF”. ➀ Select “ T DATE ”. ➁ Press “ d ” or “ c ” button to specify ?[...]

57 4 <To Cancel> Pressing the “CANCEL / BACK” button cancels only the settings for the currently selected frame. The settings for other frames are not cancelled.  3 <To Continue> When you have completed the settings, always press the “ MENU/ EXE” button to confirm the settings. The total number of prints is displayed on the L[...]

58 59 4 ➀ Use the “ ab ” button to select “TRIMMING”. ➁ Press the “MENU/ EXE” button to switch to the Trimming selection screen. You can alternate between the Zoom and Shift screens by pressing the “DISP” button. Using the Zoom screen: Use the “ ab ” button to zoom in and out. (The zoom scale increases in increments of 0.2 ?[...]

61 4 1 ➀ Use the “ ab ” button to select “SET ALL” or “CANCEL ALL”. ➁ Press the “MENU/ EXE” button.  3 To cancel a print specification, display the image you want to cancel and press the “MENU/ EXE” button. 60 ➀ Use the “ ab ” button to select “REVIEW/ CANCEL”. ➁ Press the “MENU/ EXE” button. 2 You can con[...]

63 5 Settings Display Explanation QUALITY BACK FILE SIZE FRAME NO. BEEP DATE / TIME FINE / NORMAL / BASIC EXE 1280 ✕ 960 / 640 ✕ 480 RENEW/CONT H I G H/L OW/O FF EXE Sets the compression ratio for recording. Can be set as described on P.65. ( : FINE ) : NORMAL * : BASIC Exits set-up. Sets the number of pixels recorded (image file size). Can be [...]

65 5 64 SETUP MODE Use the following procedure to display the SET-UP screen. ➀ Set the Mode switch to “ E ”. ➁ When you press the “MENU/ EXE” button, the menu screen appears. ➂ Use the “ d ” and “ c ” buttons to select MODE and then use the “ ab ” button to select “SET-UP”. ➃ Press the “MENU/ EXE” button to switc[...]

67 5 66  ADJUSTING THE LCD MONITOR BRIGHTNESS If you hold down the “DISP” button for about 2 seconds, the brightness adjustment screen appears. ➀ Use the “ d ” and “ c ” buttons to adjust the brightness. ➁ Press the “MENU/ EXE” button. 1 ● ! When the LCD monitor is switched off and no text is displayed in Photography mode ([...]

69 68 Using the USB Interface Set ● Connect the camera to your PC using the enclosed cable and transfer images from the camera to your PC. ● The software runs on Windows 98 (including the second edition) and Mac OS 8.5.1 to Mac OS 9.0. Note that your PC must be equipped with a USB port. (The software is not guaranteed to run on home-made PCs.) [...]

70 71 Accessories Guide e The optional accessories (sold separately) can make taking pictures with the FinePix1400 ZOOM even easier. For information on how to attach and use the accessories, refer to the instructions provided with the accessory used. 2 DIGITAL (USB) Plug the small pin on the special cable into the Digital (USB) socket on the camera[...]

73 Notes on Using Y our Camera Correctly ■ Places to Avoid Do not store or use the camera in the following types of locations: ● Very humid, dirty or dusty places ● In direct sunlight or in places subject to extreme temperature rises, such as in a closed car in summer. Extremely cold places ● Places subject to strong vibrations ● Places a[...]

75 If any liquid at all leaks from the batteries, wipe the battery compartment thoroughly and then load new batteries. I f any battery fluid comes into contact with your hands or clothing, flush the area thoroughly with water. Note that battery fluid can cause loss of eyesight if it gets in your eyes. If this occurs, do not rub your eyes. Flush the[...]

77 ● To avoid damage caused by static electricity, always use the special static-free case provided during transportation or storage, or keep the SmartMedia in a storage case if available. ● Do not carry SmartMedia in locations such as a trouser pocket. This could subject the SmartMedia to excessive force when you sit down, therefore damaging t[...]

Switch the Frame NO. Memory function off and use a formatted SmartMedia to take the picture. 79 Warning Displayed The frame number has reached 999- 9999. There is a strong likelihood of camera shake because the shutter speed is slow. A protected frame was erased. The AF (auto focus) cannot work effectively. The DPOF file contains an error. Alternat[...]

81 I can’t use the flash to take pictures. The flash will not charge. The playback image is too dark even though I used the flash. The image is blurred. I cannot format the SmartMedia. I cannot erase all the frames. Nothing happens when I use the camera buttons and switches. No image appears when I press the, “DISP” button. • The shutter bu[...]

83 Input / Output Terminals Power Supply and Others ● Digital USB (1) for image data output with a personal computer ● DC Input Socket for specified AC power adapter ✽ These specifications are subject to change without notice. ✽ The LCD monitor on your digital camera is manufactured using advanced high-precision technology. Even so, small b[...]

When a fault arises, switch the camera off and then remove the batteries and disconnect the AC power adapter. Continued use of the camera when it is emitting smoke, is emitting any unusual odor, or is in any other abnormal state can cause a fire or electric shock. ● Contact your Fuji dealer. Do not allow water or foreign objects to enter the came[...]

Never attempt to modify or disassemble the camera. (Never open the casing.) Do not use the camera when it has been dropped or the casing is damaged. This can cause a fire or electric shock. ● Contact your Fuji dealer. Never attempt to take pictures whilst in motion. Do not use the camera while you are walking or operating a moving car or other ve[...]

Printed in Japan FGS-002102-FG Printed on recycled paper.[...]