Epson LT - 286e manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60

Ir a la página of

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Epson LT - 286e. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Epson LT - 286e o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Epson LT - 286e se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Epson LT - 286e, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones Epson LT - 286e debe contener:
- información acerca de las especificaciones técnicas del dispositivo Epson LT - 286e
- nombre de fabricante y año de fabricación del dispositivo Epson LT - 286e
- condiciones de uso, configuración y mantenimiento del dispositivo Epson LT - 286e
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Epson LT - 286e no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Epson LT - 286e y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Epson en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Epson LT - 286e, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Epson LT - 286e, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Epson LT - 286e. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

    EPSON ® EQUITY™LT™-286e System Diagnostics User’s Guide[...]

  • Página 2

    IMPORTANT NOTICE DISCLAIMER OF WARRANTY Epson America makes no representations or warranties, either express or implied, by or with respect to anything in this manual, and shall not be liable for any implied warranties of merchantability and fitness for a particular purpose or for any indirect, special, or consequential damages. Some states do not [...]

  • Página 3

    Contents Introduction.. ......................................... 1 Starting the Diagnostics Program. .......................... 2 Creating a Database ..................................... 2 The DIAG Main Menu Screen ............................ 4 Selecting Diagnostics Tests ............................... 6 Setting the Run Time Parameters ........[...]

  • Página 4

    Hard Disk Diagnostics ................................... 20 Hard Disk Parameters. ............................... 21 Disk drive identifier. ............................ 21 Disk drive type ................................. 22 Interleave factor ............................... 22 Bad track list .................................. 23 Start and end cyli[...]

  • Página 5

    Video Diagnostics ....................................... 36 Adapter Test ...................................... 36 Attribute Test ..................................... 36 80x25 Display Test. ................................. 36 40x25 Display Test. ................................. 37 320x200 Graphics Test .............................. 37 640x200 [...]

  • Página 6

    Introduction This booklet describes how to use the diagnostics program, called DIAG, to test the condition of your computer’s main unit and peripheral devices, The DIAG program provides tests to check the following hardware: CI System board Cl Memory Ll Hard disk drive 0 Diskette drive LI Keyboard CI Video adapter board and monitor CI Printer and[...]

  • Página 7

    Starting the Diagnostics Program To start the diagnostics program, follow these steps: 1. Insert the Diagnostics diskette in drive A. 2. Turn on or reset the computer. 3. At the MS-DOS@ prompt, type the following and press Enter: DIAG The Diagnostics program displays a title screen. 4. Press any key to continue. Creating a Database You can create a[...]

  • Página 8

    If you want to create a database, follow these steps: 1. Type the name (from 1 to 50 characters) that identifies your company or the computer and press Enter in response to this prompt: vendor's name : (maximum 50 characters) For example, type EPSON and press Enter. 2. Type the computer’s model number (from 1 to 8 characters) and press Enter[...]

  • Página 9

    To update the existing database, press Y and Enter. Now you respond to the screen prompts to update the configuration. If you do not want to update the database, press N and Enter. You see the DIAG main menu. The DIAG Main Menu Screen The DIAG main menu screen looks like this: ~~~~~~~~~~ Memoly :.:-A. . . . ..I. _.... . . . . Hard Disk Keyboard Vid[...]

  • Página 10

    The Run Time Parameters window lets you specify how long you want the test to run, whether you want DIAG to notify you of each error as it occurs, and whether to create a log of all errors that occur during testing. The Help window shows the keys you use to make menu selections. A short message describing each test you highlight displays at the bot[...]

  • Página 11

    Selecting Diagnostics Tests This section describes the various ways you can select the tests you want to run. To start a single test, move the cursor to highlight the test category on the main menu. Then move the cursor to the submenu and highlight the test you want to perform. Press Enter to start the test. To select several tests at one time, mov[...]

  • Página 12

    You cannot include certain tests in a group. The tests that must run separately include: category System Board Test Timer test Real Time Clock test Hard Disk Hard Disk Format Auto Interleave Media Analysis Force Bad Tracks Floppy Disk Change Line Test Keyboard Scan/ASCII Code Test Miscellaneous Printer Adapter Test: Comm. Adapter Test After you sel[...]

  • Página 13

    Type T and press Enter to run the selected tests in Timebound mode. In Timebound mode, DIAG runs the tests for the amount of time you specify. Type C and press Enter to run the selected tests in Continuous mode. In Continuous mode, the tests run until you interrupt them. Type P and press Enter to run the diagnostics tests in Passbound mode. In Pass[...]

  • Página 14

    Timebound Testing If you selected Timebound testing, you see this prompt: Period :001 hr 00 min Specify the amount of time you want to run the selected test(s). Type the number of hours, from 000 to 999, and press Enter. Then type the number of minutes, from 00 to 59, and press Enter. You can use the backspace key (t) to edit your input. Continuous[...]

  • Página 15

    If you specify a number larger than 65535, DIAG subtracts 65535 from your entry to determine how many times to run the test. For example, if you enter a value of 65540, DIAG runs the test(s) five times. Error Logging When you request error logging, DIAG displays the following pop-up window: Log errors on disk Log errors to printer (LPT1) Log errors[...]

  • Página 16

    After selecting error logging, DIAG uses this device (and/or disk drive) for error logging until you indicate you do not want error logging. You can then specify a new device and/or disk drive by selecting error logging in the Run Time Parameters window. When you specify a new device and/or disk drive, DIAG erases the existing ERROR.LOG file. If yo[...]

  • Página 17

    Executing Diagnostics Tests in Batch Mode To execute the selected group of diagnostics tests in batch mode, simply press F6. DIAG highlights each test name as it runs the test. If you selected Passbound testing, DIAG displays the pass number on the right side of the screen above the Run Time Parameters window. For example: Pass : 00001 When DIAG is[...]

  • Página 18

    System Board Diagnostics The tests listed in the System Board submenu provide a complete diagnostics check of the system board. Basic Functionality test CPU Protected Mode test Processor speed test CoProcessor test DMA Controller test Interrupt Controller test Timer test Real Time Clock test CMOS Validity test Basic Functionality Test This test ver[...]

  • Página 19

    Processor Speed Test This test identifies the CPU clock speed and displays a message similar to this: Measure CPU speed in Megahertz = 12.00 Coprocessor Test This test checks the math coprocessor. If the math coprocessor is not installed, you see this message: Numeric Data processor not present. DMA Controller Test This test performs read/write tes[...]

  • Página 20

    Interrupt Controller Test This test performs read/write tests on the interrupt mask registers and checks for invalid interrupts. During the test, you see this message: Testing Programmable Interrupt Controller . . . . When the test completes successfully, you see this message: Programmable Interrupt Controller test passed OK. Timer Test This test v[...]

  • Página 21

    RTC Test This test verifies the accuracy of the real time clock by comparing it to the timer 0 interrupt. During the test, you see this message: Testing Real Time Clock.... When the test completes successfully, you see this message: Real Time Clock test passed. CMOS Validity Test This test checks the system’s CMOS RAM. During the test, you see th[...]

  • Página 22

    Memory Diagnostics The tests listed in the Memory submenu provide a complete diagnostics check of the system's built-inmemory. BIOS ROM Test Parity test Pattern test Walking l's test Walking O's test Address test Refresh test If you have relocated any memory addresses, you must change the addresses to their original locations for the[...]

  • Página 23

    BIOS ROM Test This test checks the data path of the BIOS ROM. When the test completes successfully, you see this message: System ROM module test passed. Parity Test This test checks for parity errors in memory. During the test, DIAG displays these messages: Testing from absolute memory location xxxxxxxxh. Checking for parity error. When the parity [...]

  • Página 24

    Walking 1’s Test This test checks the voltage in the data lines for any shorts and checks for any data bits that are always 1. During the test, you see this message: Testing from absolute base xxxxxxxxh When the test completes successfully, you see this message: Walking 1s test in memory passed OK. Walking 0’s Test This test checks the voltage [...]

  • Página 25

    Refresh Test This test checks the refresh interval. If an error occurs, DIAG displays this message: Failure in Refresh test. When the test completes successfully, you see this message: Refresh test passed OK. Hard Disk Diagnostics The tests listed in the Hard Disk submenu provide a complete diagnostics check of the system’s hard disk drive. Hard [...]

  • Página 26

    Destructive diagnostics tests include: Hard Disk Format Auto Interleave Media Analysis Force Bad Tracks The non-destructive diagnostics tests include: Performance Test Seek Test Read/Verify Test Check Test Cylinder Hard Disk Parameters DIAG may request any or all of the following parameters before performing a following hard disk test: Disk drive i[...]

  • Página 27

    Disk drive type DIAG displays the following prompt for the disk drive type: Disk Drive type ? 2 Select drive type 2 for a 20MB drive or drive type 17 for a 40MB drive. DIAG determines the type of hard disk drive based on the settings in CMOS RAM. A pop-up window on the screen lists 47 possible drive types. This allows for the possibility of additio[...]

  • Página 28

    Bad track list DIAG displays the following prompt for the bad track list: Mark Bad Tracks (Y/N) ? Entering the bad track list is optional. If you respond Y to the above prompt, you see the following menu in a pop-up window: Add an entry Revise an entry Delete an entry Clear Bad Track list Save and Exit You do not need to enter a bad track list for [...]

  • Página 29

    Start and end head numbers DIAG displays the following prompts for the starting and ending head numbers: Start Head number ? End Head number ? Enter the first and last head numbers on which you want to perform the tests. The default for the start head number is 0, and the default for the end head number is one less than the highest head number of y[...]

  • Página 30

    When you select Hard Disk Format, DIAG requests the following hard disk parameters: Disk drive identifier Disk drive type Interleave factor Bad track list (optional) Start cylinder number End cylinder number Start head number End head number If you do not specify the bad track list, DIAG performs an analysis of the surface of the hard disk to deter[...]

  • Página 31

    When you select Auto Interleave, DIAG requests the disk drive identifier and disk drive type. After you specify the parameters, you see these messages: WARNING All data on Hard disk you have specified may be LOST... Do you still want to continue (Y/N)? Press Y and Enter to start the Auto Interleave function. Press N and Enter to stop the operation.[...]

  • Página 32

    DIAG displays the following messages after you specify the hard disk parameters: WARNING All data on Hard disk you have specified may be LOST... Do you still want to continue (Y/N)? Press Y and Enter to start analyzing the hard disk. Press N and Enter to stop the operation. Performance Test This test checks the performance of your hard disk. It det[...]

  • Página 33

    When you select the Performance Test, DIAG requests the disk drive identifier and disk drive type. Seek Test This test checks the seek capability of the hard disk on the specified range of cylinders and heads. DIAG performs a series of sequential seeks followed by random seeks. It reports any errors found. When you select Seek Test, DIAG requests t[...]

  • Página 34

    Check Test Cylinder This test checks the test cylinder, which is the last cylinder on the hard disk. Perform this test if you receive a hard disk error when you boot the system. When you select Check Test Cylinder, DIAG requests the disk drive identifier and disk drive type. Force Bad Tracks Use this test to mark bad tracks on the hard disk without[...]

  • Página 35

    Press Y and Enter to start the test. Press N and Enter to stop the operation. Hard Disk Error Messages DIAG displays two types of error messages while testing the hard disk: messages DIAG generates and those the controller generates. DIAG displays the following message if you attempt to run the Performance Test with less than 128KB of memory: INSUF[...]

  • Página 36

    Floppy Disk Diagnostics The tests listed in the Floppy Disk submenu provide a complete diagnostics check of the system’s diskette drive. Diskette Format I Drive Speed Test Random R/W Test Sequential R/W Test Disk Change Line Test Floppy disk diagnostics tests may be destructive or non- destructive. Destructive diagnostics destroy data on the disk[...]

  • Página 37

    Diskette Format This test checks the format of the floppy disk controller and drive. It does not format the diskette for any particular operating system. This test destroys all data on the diskette. Drive Speed Test This test verifies how fast the floppy drive rotates a diskette. Your internal, 1.44MB, 3 1/2-inch diskette drive should rotate the di[...]

  • Página 38

    Sequential R/W Test This test checks the sequential seek, read, and write capabilities of a floppy disk drive. It performs a sequential read/write operation on the diskette in the specified drive. To perform this test, insert a diskette into the drive you plan to test. Use a diskette you have formatted with the Diskette Format test. This test destr[...]

  • Página 39

    CHANGE LINE Not Available DIAG displays this message if you attempt to run the Change Line Test on a drive that does not support a change line, such as a 360KB or 720KB drive. The controller displays one of the following messages when an error occurs during a diagnostics procedure: BAD address mark BAD CRC error BAD DMA error BAD SEEK error Diskett[...]

  • Página 40

    Controller Test This test checks the keyboard controller. Scan/ASCII Code Test This test checks the scan codes assigned to the keys on the keyboard. When you select this test, DIAG displays the layout of your keyboard on the screen. When you press a key, DIAG displays the scan code and the ASCII code of the key. See the “Keyboard Scan/ASCII Codes[...]

  • Página 41

    Video Diagnostics The tests listed in the Video submenu provide a complete diagnostics check of the video adapter. Use these tests to check the operation of the LCD or monitor connected to your computer. Run All Tests Adapter Test Attribute Test 80x25 Display Test 40x25 Display Test 320x200 Graphics Test 640x200 Graphics Test Page Selection Test Co[...]

  • Página 42

    40x25 Display Test This test checks the 40x25 display feature of the display adapter. This test is available for a color display adapter only. 320x200 Graphics Test This test checks the 320x200 graphics display feature of the display adapter. This test is available for a color display adapter only. 640x200 Graphics Test This test checks the high re[...]

  • Página 43

    640x350 Graphics Test This test checks the 640x350 graphics display feature of the EGA display adapter. This test is available for a color display adapter only. Video Error Message DIAG displays the following error message during the Adapter Test: DISPLAY MEMORY R/W ERROR The Adapter Test detected a read/write error in the display memory. This indi[...]

  • Página 44

    You may see one of the following error messages during this test: Error - Printer Out of Paper Error - Printer Not Selected Error - Printer Interface I/O Error Error - Time Out On Printer Check that the printer is on-line, paper is loaded, and all connections are secure. Communication Adapter Test This test checks the serial port. Before running th[...]

  • Página 45

    You may see one of the following error messages during this test: Error - Break Detected Error - Framing error Error - Overrun error Error - Parity error Error - Time out! These error messages indicate a problem with the controller or with the test cable. Make sure the test connector is secure. If the error persists, contact your dealer. 40 System [...]

  • Página 46

    Keyboard Scan/ASCII Codes Keystroke Sys Req Num Lock Scroll Lock Home T PgUP F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 E t [blank key] ** No codes - Ignored Scan Code ASCII Code ** ** 29 60 ** *t tt ** 0C 2D 47 00 48 00 49 00 4A 2D 3B 3c 3D 3E 3F 40 41 42 43 44 OD 4B - 00 00 00 00 00 00 00 00 00 00 3D 00 - System Diagnostics 41[...]

  • Página 47

    Keystroke Scan Code ASCII Code + 4D 00 + 4E 2B Esc 1 2 3 4 5 6 7 8 9 0 End 5- PgDn + Ww) Tab q W e r t 01 1B 02 31 03 32 04 33 05 34 06 35 07 36 08 37 09 38 0A 39 0B 30 4F 00 50 00 51 00 0E 08 0F 09 10 71 11 77 12 65 13 72 14 74 ** No codes - Ignored 42 System Diagnostics[...]

  • Página 48

    Keystroke 0 P [ ] Enter Ctrl a S d f g h j k I ’ (apostrophe) Shift (left) Z X ** No codes - Ignored Scan Code ASCII Code 15 79 16 75 17 69 18 6F 19 70 1A 5B 1B 5D 1C 0D ** ** 1E 61 1F 73 20 64 21 66 22 67 23 68 24 6A 25 6B 26 6C 27 3B 28 27 l * ** 2C 7A 2D 78 System Diagnostics 43[...]

  • Página 49

    Keystroke Scan Code ASCII Code C V b n m , (comma) I Shift (right) Alt l [space bar] Caps Lock Ins Del Shift SysReq Shift ’ (-) Shift NumLock Shift ScrollLock Shift - (-) Shift Home (7) Shift ? (8) ** No codes - Ignored 2E 63 2F 76 30 62 31 6E 32 6D 33 2C 34 2E 35 2F ** * * ** ** 37 ** 28 5C 39 20 ** ** 52 00 53 00 ** ** 29 7E ** ** ** ** 0C 5F[...]

  • Página 50

    Keystroke Scan Code ASCII Code Shift PgUp (9) 49 00 Shift - 4A 2D Shift F1 Shift F2 Shift F3 Shift F4 Shift F5 Shift F6 Shift F7 Shift F8 Shift F9 Shift F10 Shift = (+) Shift t (4) Shift [blank key] Shift + (6) Shift + 54 00 55 00 56 00 57 00 58 00 59 00 5A 00 5B 00 5C 00 5D 00 0D 2B 48 00 - - 4D 00 4E 2B Shift Esc 01 1B Shift 1 (!) 02 21 Shift 2 ([...]

  • Página 51

    Keystroke Shift 6 (^) Shift 7 (&) Shift 8 (*) Shift 9 (() Shift 0 ()) Shift End (1) Shift L (2) Shift PgDn (3) Shift t (bksp) Shift Tab Shift Q Shift W Shift E Shift f? Shift T Shift Y Shift U Shift I Shift O Shift P Shift [ ({) Shift ] (}) Shift Enter ** No codes - Ignored Scan Code 1 ASCII Code 07 5E 08 26 09 2A 0A 28 0B 29 4F 00 50 00 51 00 [...]

  • Página 52

    r- r Keystroke Shift Ctrl Shift A Shift S Shift D Shift F Shift G Shift H Shift J Shift K Shift L Shift ; (:) Shift ’ (“) Scan Code 1E 1F 20 21 22 23 24 25 26 27 28 Shift (left) Shift Z Shift X Shift C Shift V Shift B Shift N Shift M Shift, (<) Shift (>) Shift / (?) Shift Shift (right) ** No codes - Ignored l * 2C 2D 2E 2F 30 31 32 33 34 [...]

  • Página 53

    Keystroke Scan Code ASCII Code Shift Alt ** ** Shift * (PrtSc) ** ** Shift (|) 2B 7C Shift [space bar] 39 20 Shift CapsLock ** ** Shift Ins (0) 52 30 Shift Del (.) 53 2E Ctrl SysReq ** ** Ctrl - - Ctrl NumLock - - Ctrl ScrollLock (Break) - exits test Ctrl - 0C 1F Ctrl Home 77 00 Ctrl t - - Ctrl PgUp 84 00 Ctrl - - - Ctrl F1 5E 00 Ctrl F2 5F 00 Ct[...]

  • Página 54

    Keystroke Ctrl F9 Ctrl F10 Ctrl = Ctrl t Ctrl [blank key] Ctrl + Ctrl + Ctrl Esc Ctrl 1 Ctrl 2 (NUL) Ctrl 3 Ctrl 4 Ctrl 5 Ctrl 6 (RS) Ctrl 7 Ctrl 8 Ctrl 9 Ctrl 0 Ctrl End Ctrl 1 Ctrl PgDn Ctrl t (bksp) Scan Code ASCII Code 66 00 67 00 - - 73 00 - - 74 00 - - 01 1B - - 03 00 - - - - - - 07 1E - - - - - - - - 75 00 - - 76 00 0E 7F ** No codes - Ignor[...]

  • Página 55

    Keystroke Ctrl Tab Ctrl Q (DC1) Ctrl W (ETB) Ctrl E (ENQ) Ctrl R (DC2) Ctrl T (DC4) Ctrl Y (EM) Ctrl U (NAK) Ctrl I (HT) Ctrl 0 (SI) Ctrl P (DLE) Ctrl [ (ESC) Ctrl ] (GS) Ctrl Enter (LF) Ctrl Ctrl A (SOH) Ctrl S (DC3) Ctrl D (EOT) Ctrl F (ACK) Ctrl G (BEL) Ctrl H (bksp) Ctrl J (LF) Ctrl K (VT) Ctrl L (FF) ** No codes - Ignored Scan Code ASCII Code [...]

  • Página 56

    Keystroke Scan Code ASCII Code 1 Ctrl ; Ctrl ’ Ctrl Shift (left) Ctrl Z (SUB) Ctrl X (CAN) Ctrl C (ETX) Ctrl V (SYN) Ctrl B (STX) Ctrl N (SO) Ctrl M (CR) Ctrl , Ctrl , Ctrl / Ctrl Shift (right) Ctrl Alt Ctrl * (PrtSc) Ctrl (FS) Ctrl [space bar] Ctrl CapsLock Ctrl Ins Ctrl Del Alt SysReq Alt ’ ** No codes - Ignored - - ** 2C 2D 2E 2F 30 31 32 -[...]

  • Página 57

    I Keystroke Scan Code ASCII Code Alt NumLock Alt Scrolllock Alt- Alt Home Alt 7 Alt PgUp Alt - ** ** 82 - - - - Alt F1 Alt F2 Alt F3 Alt F4 Alt F5 Alt F6 Alt F7 Alt F8 Alt F9 Alt F10 AA = Alt t Alt [blank key] Alt + Alt + 68 69 6A 6B 6C 6D 6E 6F 70 71 83 - - - - Alt Esc - Alt 1 78 ** ** 00 - - - - 00 00 00 00 00 00 00 00 00 00 00 - - - - - 00 ** No[...]

  • Página 58

    Keystroke Scan Code ASCII Code Alt 2 79 00 AIt 3 7A 00 Alt 4 7B 00 Alt 5 7C 00 Alt 6 7D 00 Alt 7 7E 00 Alt 8 7F 00 Alt 9 80 00 Alt 0 81 00 Alt End - - Alt -1 - - Alt PgDn - - Alt t (bksp) - - Alt Tab - - Alt Q 10 00 Alt W 11 11 Alt E 12 00 Alt R 13 00 Alt T 14 00 Alt Y 15 00 Alt U 16 00 Alt I 17 00 Alt O 18 00 Alt P 19 00 ** No codes - Ignored Syst[...]

  • Página 59

    Keystroke Scan Code ASCII Code Alt [ Alt ] Alt Enter - - - Alt Ctrl Alt A Alt S Alt D Alt F Alt G Alt H Alt J Alt K Alt L Alt ; Alt ’ ** 1E 1F 20 21 22 23 24 25 26 - - Alt Shift (left) Alt Z At X Alt C Alt V Alt B Alt N Alt M Alt , ** 2C 2D 2E 2F 30 31 32 - - - - ** 00 00 00 00 00 00 00 00 00 - - ** ** ** ** ** ** ** ** - ** No codes - Ignored 54[...]

  • Página 60

    Keystroke Alt . Alt/ Alt Shift (right) Alt Alt* Alt Alt [space bar] Alt CapsLock Alt Ins Alt Del Scan Code ASCII Code - - - - ** ** ** ** - - - - 39 20 ** ** - - - - ** No codes - Ignored System Diagnostics 55[...]