Epson EH-TW5900 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95

Ir a la página of

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Epson EH-TW5900. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Epson EH-TW5900 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Epson EH-TW5900 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Epson EH-TW5900, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones Epson EH-TW5900 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Epson EH-TW5900
- nombre de fabricante y año de fabricación del dispositivo Epson EH-TW5900
- condiciones de uso, configuración y mantenimiento del dispositivo Epson EH-TW5900
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Epson EH-TW5900 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Epson EH-TW5900 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Epson en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Epson EH-TW5900, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Epson EH-TW5900, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Epson EH-TW5900. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

    User's Guide[...]

  • Página 2

    Organization of t he Guide and Notation s in the Guide 1 Using Each Guide The guides for this projector are organized as shown below. Safety Instructions/Support and Service Guide Contains information on using the projector safely, as well as a support and service guide, troubleshooting check lists, and s o on. Make sure you read this guid e before[...]

  • Página 3

    Organization of t he Guide and Notation s in the Guide 2 Notations Used in This Guide Safety Indications The documentation and the projector use grap hical sy mbols to show how to use the projector safely. The following shows the symbols and their meanings. Please understand and respect these caution symbols in order to avoid injury to persons or p[...]

  • Página 4

    Organization of t he Guide and Notation s in the Guide 3 Checking Supplied Items See the following list to check the supplied items. If anything is missi ng or damaged, contac t the store where you purchased the projector. Projector Remote control s p.13 Power cable AA size alkaline batteries (x2) s p.21 3D Glasses Pack s p.41 See the docume ntatio[...]

  • Página 5

    Contents 4 Organization of the Guide and Notations in the Guide U s i n g E a c h G u i d e ..................... 1 N o t a t i o n s U s e d i n T h i s G u i d e ........... 2 S a f e t y I n d i c a t i o n s ......... ......... ..... 2 G e n e r a l I n f o r m a t i o n I n d i c a t i o n s ............ . 2 About the Use of "This Product[...]

  • Página 6

    Contents 5 S e t t i n g A u t o I r i s .......... ........... ... 3 6 Viewing the Image at the Saved Image Quality (Memory Function) . . . . . . . . . . . 38 S a v i n g F u n c t i o n ................. ....... 3 8 S a v i n g a M e m o r y ..................... .. 3 8 L o a d i n g a M e m o r y ...................... 3 9 E r a s i n g a M e m [...]

  • Página 7

    Contents 6 L a m p r e p l a c e m e n t p e r i o d ..... ......... 7 9 R e p l a c i n g C o n s u m a b l e s .................. 8 0 R e p l a c i n g t h e a i r f i l t e r ..... ............ 8 0 R e p l a c i n g t h e l a m p ................... 8 1 R e s e t t i n g l a m p h o u r s ............ ...... 8 2 Appendix Optional Accessories and[...]

  • Página 8

    Introduction 7 Projector Features Dynamic 3D Display Enjoy 3D contents on Blu-ray and images filmed with a 3D camera th rough a stunning project ion display. s p.41 You need 3D Glasses to view 3D images. s p.41 Selecting Modes to Match what you are Watching (Color Mode) By simply selecting the Color Mode , you can project the optimum imag e to suit[...]

  • Página 9

    Introduction 8 Conforms to Wireless Transmissi ons for the WirelessHD Standard s (EH-TW6000W only) The projector can wirelessly receive data and cont rol signals for images and audio from Wirele ssHD compatible devices. Because devices do not need to be connected directly to the projector via a cable, they can be setup wherever you like. s p.53 Pro[...]

  • Página 10

    Introduction 9 Part Names and Functions Front/Top Name Function a Lamp cover Open when replacing the projector's lamp. s p.81 b Air exhaust vent Exhaust vent for air used to cool the projector internally. Caution While projecting, do not put your face or hands near the air exh aust vent, and do not place objects that may become warped or damag[...]

  • Página 11

    Introduction 10 Control Panel Buttons/Indicators Function a Brightness sensor Detects the brig htness of the room . Wh en Color Mode is set to "Auto", the optimum image quality is set according to the brightness detect ed by the sen- sor. s p.29 b Operation indicator Flashes to indicate warm-up in progre ss or cool-down in progress. Shows[...]

  • Página 12

    Introduction 11 Rear Name Functio n a Speaker The projector's built-in speaker. Outputs audio. Set Inverse Audio to On to use the built-in spea ker when the projector is suspended from a ceiling. s Settings - Audio - Inverse Audio p.61 b Power inlet Connects the power cable. s p.22 c Remote receiver Receives signals from the remote control. s [...]

  • Página 13

    Introduction 12 Base Name Function a Ceiling mount fixing points (four points) Attach the optional ceiling mo unt here when susp ending the projector f rom a ceiling. s p.84 b Front adjustable foot When setup on a surface such as a table, extend the foot to adjust the height . s p.26[...]

  • Página 14

    Introduction 13 Remote Control Button Function a Turns the projector on. s p.22 b Turns the pro jector off. s p.23 c The remote control buttons light up for ap- proximately 10 seconds. This is useful when operating th e remote control in the dark. d Changes to th e image fr om each inp ut port. s p.23 The button is only available for E H- TW6000W. [...]

  • Página 15

    Introduction 14 Button Function m Displays and closes th e configuration menu. On the configuration menu, you can make adjustments and settings for Signal, Image, Input Signal, and so on. s p.56 n Return to the previous men u level when a menu is displayed. s p.56 o Sets Auto Iris. s p.36 p Adjusts the hue, saturation, and brightness for each RGBCM[...]

  • Página 16

    Introduction 15 Appearance Units: mm aC e n t e r o f l e n s b Distance from center of lens to susp ension bracket fixing point[...]

  • Página 17

    Preparing 16 Setting Up Various Projection Methods Warning • A special method of installation is required when suspe nding the projecto r from a ceiling (ceiling mount). If it is not installed correctly, it could fall causing an accident and injury. • If you use adhesives, lubricants, or oil on ceiling mount fixing points to prevent sc rews fro[...]

  • Página 18

    Preparing 17 Adjusting the Projection Size The size of the projection increa ses as th e projector is moved away from the screen. Use the table below to setup the projector at the opti mum position from the screen. The values given here are for your reference only. B Dist ance from th e center of th e lens to the base of the projection screen Unit:[...]

  • Página 19

    Preparing 18 Connecting to Devices Attention • Turn off the equipment you want to connec t before connecting. If the equipment is on when you connect, it could cause a malfunction. • Check the shape of the cable's connector and th e shape of the port, and th en connect. If you force a conn ector of a different sh ape into the po rt, it cou[...]

  • Página 20

    Preparing 19 Connecting to a Computer To project images from a computer, connect th e computer using one of the following meth ods. When using a computer cable For audio connections, make sure you use an audio cable labe led "No resista n ce" to connect the 2RCA W stereo mini-plug. When using an HDMI cable Fix the HDMI cable in place usin[...]

  • Página 21

    Preparing 20 Attention • If you use a USB hub, the connec tion may not operat e correctly. Devi ces such as digita l cameras and USB devices should be connecte d to the proje ctor directly. • Connect a digital camera using a USB ca ble specified for use with the device. • Use a USB cable less than 3 m in length. If the cabl e exceeds 3 m, sli[...]

  • Página 22

    Preparing 21 Preparing the Remote Control Installing the Remote Control Batteries Attention • Check the positions of the (+) and (-) marks inside the battery holder to en sure the batterie s are inserted the correct way. • You cannot use othe r batteries except for the AA size manganese or alkaline. a Remove the battery cover. While pushing the[...]

  • Página 23

    Basic Operations 22 Starting and Ending Projection Turning on the Proj ector and Projecting a Connect the power cable. Connect using the power cable supplied. b Remove the lens cover. c Turn on the conn ected equipment. d Turn the power on. Remote control Control panel c When Direct Power On is set to On , you ca n start projecti ng by simply conne[...]

  • Página 24

    Basic Operations 23 If the Target Image is not Projected If the image is not projected, you can change the source using one of the following method s. Remote control Control panel Press the button for the target port. Press the button and se lect the targe t port. Press the button to con firm the selection . c • For video equipmen t, start playba[...]

  • Página 25

    Basic Operations 24 f Reattach the lens cover.[...]

  • Página 26

    Basic Operations 25 Adjusting the Projection Screen Displaying the Test Pattern When adjusting the zoom/focus or the projection position just after settin g up the projector, you can display a test pattern inst ead of connecting video equipment. Press the button on the remot e control to displa y the test pattern . Press the button to clos e the te[...]

  • Página 27

    Basic Operations 26 Adjusting the Projector's Tilt If the projection screen is tilted (t he left and right sides of the projecto r are at different heights) when the projector is setup on a table, adjust the front fo ot so that both sides are level with each other. Correcting Keystone Distortion You can correct keystone d istortion using one o[...]

  • Página 28

    Basic Operations 27 You can make effective corrections within a projection angle of 30° left to right. c If you want to use the H-Keystone Adjuster, set H-Keystone Adjuster to On . s Se ttings - Keystone - H-Keystone Adjuster p.61 Correct manually (H/V-Keystone) You can use the but tons on the control panel to correct keyston e distortion. Press t[...]

  • Página 29

    Basic Operations 28 Adjusting the Volume You can adjust the volume by using the buttons on the remote contro l or the buttons on the projector's control panel. Remote control Control panel c • You can also adjust the volume from the configuration menu. s Settings - Audio p.61 • Under normal conditions, you can adjust th e volume of the pro[...]

  • Página 30

    Adjusting the Image 29 Basic Settings for Image Selecting the Projection Quality (Color Mode) You can obtain the optimum im age qual ity to suit your surroundings when projecting. The brightness of the image varies depending on the mode selected. a Press the button. c You can make settings f rom the configuration men u. s Image - Color Mo de p.57 b[...]

  • Página 31

    Adjusting the Image 30 Choices when projecting 2D images Mode Applic ation Auto Sets the color mode auto maticall y according to the surroundings. Dynamic Ideal for use in a brig ht room . This is the brightest mode, and reproduces shadow tones well. Living Room Ideal for use i n a bright room. Images are clear and sh arp. Natural Ideal for use in [...]

  • Página 32

    Adjusting the Image 31 Aspect Ratio of In- put Image Setting Name (Aspect Ratio) Normal Full Zoom Wide 4:3 Images 16:9 Images and Images Recorded Using Squeeze Letterbox Im- ages *1*2 Notes Matches the vertical size of the projection panel. The aspect ra- tio differs depend- ing on the input im- age. Uses the entire pro- jection panel. Retains the [...]

  • Página 33

    Adjusting the Image 32 Absolute Color Adjustments Adjusting Hue, Saturation, and Brightness You can adjust the hue, saturation, and brightness fo r ea ch of the R (red), G (green), B (blue), C (cyan), M (magenta), and Y (yellow) colors . Hue Adjusts the overa ll color of the image to be blue, green, or red. Saturation Adjusts the overall vividness [...]

  • Página 34

    Adjusting the Image 33 Adjusting the Gamma You can adjust slight coloration differences that may occur due to the device bein g used when the image is displayed. You can use one of the following three meth ods select ed from the conf iguration m enu. Setting Method Menu Settings Select and adjust the correc- tion value Image - Advanced - Gamma Adju[...]

  • Página 35

    Adjusting the Image 34 Adjust using the gamm a adjustment graph Make adjustments while viewing the gamma adjustment graph for the image being projected. a Use the buttons to select the part you want to adjust from the graph. b Use the buttons to adjust the brightne ss, and then press the button to confirm the selection. Adjusting the RGB (Offset/Ga[...]

  • Página 36

    Adjusting the Image 35 c Press the button to return the adjustments to their default values. Skin Tone You can adjust the skin tone. Make adjustments if the skin tone is to o red or to o green and so on. The menu is displayed in the following order. Image - Skin Ton e Use the buttons to make adjustment s. The image becomes greener when set to the r[...]

  • Página 37

    Adjusting the Image 36 Detailed Image Adjustments Adjusting the Sharpness You can make the image clearer. It cannot be adjusted when a comp uter image signal is being input. Thin Line Enhancement Details such as hair and patte rns on clothing are enhanced. Thick Line Enhancement Rough parts s uch as outlines fo r entire subjects o r the background [...]

  • Página 38

    Adjusting the Image 37 a Press the button. Remote control Control panel The configuration menu is displayed. b Select Image - Auto Iris . The Auto Iris adjustment screen is displayed. c Use the buttons to select the item, an d then press the button to confirm the selection. d Press the button to close the menu.[...]

  • Página 39

    Adjusting the Image 38 Viewing the Image at the Saved Image Quality (Memory Function) Saving Function You can save the adjustment values for some images and image quality sett ings in the configuration menu for later use (Save Memory). Because these saved adjustment values can be loaded fr o m t h e r e m o t e c o n t r o l , y o u c a n e a s i l[...]

  • Página 40

    Adjusting the Image 39 Loading a Memory a Press the button, and then select Load Memory . The Load Memory screen is displayed. b Select the target memory name. c • The color mode saved to the memo ry is displayed on the right. • Depending on the input sig nal, part of the loaded memory item may not b e applied to the projected image. • Memori[...]

  • Página 41

    Adjusting the Image 40 d Enter a name. Use the buttons to select a character, and then press the b u t t o n t o c o n - firm the selection. Enter up to 12 characters. When you have finished entering the name, se- lect Finish . The memory name is changed.[...]

  • Página 42

    Useful Functions 41 Enjoying 3D Images Watching 3D Images When 3D data is received from the HDMI1, HDMI2, or WirelessHD (E H-TW6000W only) source, the image is automatically projected in 3D. The following 3D formats are suppo rted. • Frame Packing • Side by Side • Top and Bottom Using 3D Glasses Use the supplied or optional 3D Gla sses (ELPGS[...]

  • Página 43

    Useful Functions 42 Projecting 3D images a Connect an AV device capable of playing 3D images to the projector. b Turn on the AV device and the projector, and then press the button. If the 3D image is projected automatically, you do not need to press any buttons. c • How a 3D image is perceived varie s depending on the individual. • The image is[...]

  • Página 44

    Useful Functions 43 Viewing Area for 3D Images The projector is equipped with an internal 3D emitter that synchronizes with your 3D Glasses to view 3D images. This allows you to view 3D images within the range shown in th e figure below. Use the optional External 3D IR emitter if you cannot vi ew the 3D image normally or if you are in a particularl[...]

  • Página 45

    Useful Functions 44 Caution About the 3D Glasses • Do not drop or press to o forcefully on the 3D Glasses. If the glass sections and so on are broken, an injury could occur. Store the glasses in the soft glasses case supplied. • Be careful o f the edges o f the fr ame when wearing the 3D Glasses. If it pokes your eye and so on, an injury could [...]

  • Página 46

    Useful Functions 45 Caution Watching 3D Images • If your eyes feel fatigued or uncomfortable when viewing 3D images, stop viewing immediately. Continuing to view the 3D images could cause you to feel unwell. • When viewing 3D images be sure to always wear 3D Glasses. Do not attem pt to view 3D images wit hout 3D Glasses. Doing so could cause yo[...]

  • Página 47

    Useful Functions 46 Caution Lithium Coin Batteries • Only CR2032 lithium coin batteries ca n be used by this device. Do no t attempt to use any other type of batteries. If the batteri es are inversed by mistake, they co uld explode o r leak, causing a f ire, injury, or da maging the surroundings. • Do not put batt eries in a flame or heat them [...]

  • Página 48

    Useful Functions 47 Changing Between Two Types of Images Split Screen You can project two different images at once, one on the left and one on the righ t. You can project th ese images at the same size, or make one larger or smaller th an the other to view a sub image while you are watching the larger main image . Combinations of input source s for[...]

  • Página 49

    Useful Functions 48 Changing the split screen settings You can change the source and the display size used for split screen display from the Split Scree n Setup menu. a Press the button during split screen projection. The Sp lit Screen Setup menu is displayed. c Press the button during split screen projection to immediately display the Split Screen[...]

  • Página 50

    Useful Functions 49 HDMI Link HDMI Link Function When an AV device that meets the HDMI CEC standards is connected to the projector's HDMI po rt, you can perform linked operations such as linked power on and volume adjustment for the AV system from one remote control. Also, when projec ting images in Wirele ssHD, you ca n use the HDMI link func[...]

  • Página 51

    Useful Functions 50 c • To use the HDMI Link function, you must config ure the connected device . See the docum entation supplied with the connected device for more information. • Even when using the WirelessHD Tran smitter with Power On Link set to Device -> PJ or Bidirectional , if WirelessHD is set to On , this projector als o turns on wh[...]

  • Página 52

    Useful Functions 51 Playing Back Image Data (Slideshow) Compatible Data The following types of files stored on USB storage devices such as USB memories, digital cameras, and so on that are connected to the projector's USB port can be displayed as a slideshow. Slideshow compatible file types File Type (Extension) Notes .jpg • Images using CMY[...]

  • Página 53

    Useful Functions 52 Display Settings for Image Files and Slideshow O peration Settings You can set the file display order and slid eshow operations on the option screen. a Use the buttons to position the cursor over the folder where you want to set display conditions, and then press the button. Select Option from the submenu displayed, and then pre[...]

  • Página 54

    Useful Functions 53 Connecting with WirelessHD (EH-TW6000W Only) Installing and Connecting the WirelessHD Transmitter You can use the included WirelessHD Transmitter to wirele ssly receive image and sound data as well as control signals. This eliminates the need to connect any cables to the projector, which is convenient when you are unable to plac[...]

  • Página 55

    Useful Functions 54 Reconnecting If the projector cannot project images from the Wire lessHD Transmitter, follow the steps below to reconnect. a Setup the WirelessHD Transmitter close to the projector. s p.55 c Check that there are no other projectors operating in the area. b Start playback on the AV device, and then turn on the projector and the t[...]

  • Página 56

    Useful Functions 55 WirelessHD Transmission Range The following shows the communicatio n tr ansmission range for the WirelessHD. Horizontal direction Vertical direction (placed on a table and so on ) Vertical direction (suspended from a ceiling) c • The wireless tr ansmission range va ries depe nding on the placement and material of the surroundi[...]

  • Página 57

    Configuration Menu 56 Configuration Menu Functions Configuration Menu Operations On the configuration men u, you can make adjustments and settings for Signal, Image, Input Signal, and so on. a Press the button. Remote control Control panel The configuration menu is displayed. b Use the buttons to select the top menu on the left, and then press the [...]

  • Página 58

    Configuration Menu 57 c For items adjusted using an adju stment bar, such as the brightness l evel, you can press the button while the adjustmen t screen is displayed to return th e adjustment value to its defa ult value. Configuration Menu Table If there is no image signal being input, you canno t adjust items related to th e image or signal in th[...]

  • Página 59

    Configuration Menu 58 Function Menu/Settings Explanation Power Con- sumption Normal, ECO You can set the lamp brightness to one of two settings. Select ECO if the images being projected are too bright. When ECO is selected, pow- er consumption during projection decrea- ses, and fan rota tion noise is reduced. Auto Iris Off, Normal, High Speed You c[...]

  • Página 60

    Configuration Menu 59 Function Menu/Settings Explanation Sync. *2 *3 0 to 31 Adjusts computer imag es when flickering, fuzzi- ness, or interference appear in the images. • Adjusting the Brightness , Contrast , or Sharp- ness may cause flickering or blurriness. • Adjusting the synchronization after adjusting tracking allo ws for more accu rate a[...]

  • Página 61

    Configuration Menu 60 Function Menu/Settings Explanation (Advanced) EPSON Super White *2 *6 On, Off (This can only be set when the Color Mode is set to Auto , Natural , Cinema , or 3D Cinema and when receiving signal input from the HDMI1 or HDMI2 ports, or from WirelessHD.) Set this to On if you are experiencing bright over exposure of whites in yo[...]

  • Página 62

    Configuration Menu 61 Settings menu Function Menu/Settings Explanation Keystone H/V-Keystone V-Keystone -60 to 60 Pe rforms vertical keystone correc- tion. s p.27 H-Keystone -60 to 60 Performs horizontal keys tone cor- rection. s p.27 Auto V-Keystone On, Off Enables or disables Au to V-Key- stone . s p.26 H-Keystone Adjuster On, Off Enables or disa[...]

  • Página 63

    Configuration Menu 62 Function Menu/Settings Explanation Wirele ssHD * Device Connections - Displays a list o f available Wireless HD device s that can be connect ed. WirelessHD On, Off Enables or disables the WirelessHD function. Reception Displays the reception. Rename Device Name Device1 to Device 9 Allows you to change the names of devices disp[...]

  • Página 64

    Configuration Menu 63 Function Menu/Settings Explanation Projection Front, Front/Ceiling, Rear, Rear/Cei ling Change t his se tting depending on how the projector is installed. • Front : Select if you are projecting in front of the screen. • Front/Ceiling : Select i f you are projecting in front of the screen suspended from the ceiling. • Rea[...]

  • Página 65

    Configuration Menu 64 Function Menu/Settings Explanation Display Menu Position - Sets the position where the m enu should b e dis- played. Menu Color Colo r 1, Color 2 Selects the color fo r the top menu. • Color 1 : Black • Color 2 : Blue Messages On, Off Sets whether or not to display th e following mes- sages (On or Off). • Item names for [...]

  • Página 66

    Configuration Menu 65 Info menu Function Explanation Lamp Hours Displays the cumulative lamp operating time. Source Displays the source name for the connected equ ipment currently being projec- ted. Input Signal Displays the content of Input Signal set in the Signal menu according to the source. Resolution Displays the resolution. Scan Mode Display[...]

  • Página 67

    Configuration Menu 66 Split Screen menu Displayed by pressing the button during split screen pro jection. Function Menu/Settings Explanation Split Screen Screen Size Equal, Larger Left, Larger Right Changes the left and right screen sizes. s p.48 Source Left, Righ t PC Video Compone nt HDMI1/HDMI2 WirelessHD * USB Selects wh ich source is displayed[...]

  • Página 68

    Troubleshooting 67 Problem Solving Reading the Indicators You can check the status of the pr o jector from the flashing and lit , (operation ind icators), o and m on the control panel. Refer to the following table to check the projector' s status and how to remedy problems shown by the indicators. Indicator status during an error/warning : Lit[...]

  • Página 69

    Troubleshooting 68 Indicators Status Remedy (red) Lamp Error Lamp Failure There is a problem with the lamp , or it failed to turn on. • Disconnect the power cable, and then check if the lamp is cracked. s p.81 If it is not cracked, reinstall the lamp and turn on the power. If reinstalling the lamp does not fix the problem, or if the lamp is crack[...]

  • Página 70

    Troubleshooting 69 Indicators Status Remedy (blue) Projection in pro- gress The projector is operating normally. c • Under normal operating conditions, the o and m indicators are off. • When the Illumination function is set to Off , all indicators are off under normal projection con ditions. s Extended - Operation - Illuminat ion p.63 When the [...]

  • Página 71

    Troubleshooting 70 Problems relating to images No images appear Check Remedy Is the projector turned on? Press the button on the remote control or th e button on the contro l panel. Is the power cable connected? Connect the power cable. Are the indicators switched off? Disconnect an d then reconnect the projector's power cable. Check that powe[...]

  • Página 72

    Troubleshooting 71 The message "Not supported" is displayed Check Remedy Is the image signal format sett ing correct? When Video is input If nothing is proj ected even when Video Signal is se t to Auto from the configurat ion menu, set the signal that matc hes the connected device. s Extended - Input Signal - Video Sig- nal p.63 When Comp[...]

  • Página 73

    Troubleshooting 72 Check Remedy Has condensation formed on the lens? If the projecto r is suddenly taken from a cold environment to a warm environment, or if sudde n ambient temperature changes occur, condensation may form on the surface of the lens, and this may cause the images to appear fuzzy. Set the projector up in the room about one hour befo[...]

  • Página 74

    Troubleshooting 73 Image colors are not right Check Remedy Is the image signal format sett ing correct? When Video is input If nothing is proj ected even when Video Signal is se t to Auto from the configurat ion menu, set the signal that matc hes the connected device. s Extended - Input Signal - Video Sig- nal p.63 When Component is input If nothin[...]

  • Página 75

    Troubleshooting 74 Problems when projection starts The projector do es not turn on Check Remedy Is the power turned on? Press the button on the remote control or th e button on the contro l panel. Is Child Lock set to On ? When Child Lock is set to On from the configuration menu, hold down the button on the control panel f or approximately three se[...]

  • Página 76

    Troubleshooting 75 Check Remedy Is 3D Display set to Off ?I f 3D Display is set to Off from the configuration menu, the pro- jector does not automatically change to 3 D even when a 3D im- age is input. Press the button. s Signal - 3D Setup - 3D Display p.58 Is the correct 3D format set? The projector au tomatically selects the appropriate 3D format[...]

  • Página 77

    Troubleshooting 76 Check Remedy Is WirelessHD set to Off ? When WirelessHD is set to Off from the configuration menu, projection is not possible for WirelessHD input signals. Se t Wire- lessHD to On , and then press the button. s Settings - WirelessHD p.61 Are signals being received within the Wire- lessHD transmissio n range? Check the range withi[...]

  • Página 78

    Maintenance 77 Maintenance Cleaning the Parts You should clean the projecto r if it becomes dirty or if t he quality of projected images st arts to deteriorat e. Warning Do not use sprays that contain flammable gas to remove dirt and dust from the projector's lens, air filter, and so on. The projector may catch fire due to the high internal te[...]

  • Página 79

    Maintenance 78 d Hold the air filter with the surface facing down and tap it 4 or 5 times to remove the dust. Turn it over and tap the other side in the same way. Attention If the air filter is hit too hard, it may become unusable due to deformities and cracks. e Remove any dust remaining on the air filter by using a vacuum cleaner from the front s[...]

  • Página 80

    Maintenance 79 Cleaning the lens Use a commercially a vailable cloth fo r cleaning glas ses to gently w ipe off dirt from the lens. Attention Do not rub the lens with hars h materials or handle the lens too roughly as it can easily become dama ged. Cleaning the 3D Glasses Use the cloth supplied to gently wipe off dirt from the len ses of the 3D Gla[...]

  • Página 81

    Maintenance 80 Replacing Consumables Replacing the air filter c Dispose of used air filters in accordance with your local laws and regulations. Material: Polypropylene a Press the button on the remote control or the control panel to turn off the power, and then disconnect the power cable. b Remove the air filter cover. Hook your finger into the tab[...]

  • Página 82

    Maintenance 81 Replacing the lamp Warning When replacing the lamp because it has stopped illuminating, there is a possibility that the lamp may be broken. If replacing the lamp of a projector that has been suspended from the ceil ing, you should al ways assume that the lamp is cracked, and remove the la mp cover with care. When you open the lamp co[...]

  • Página 83

    Maintenance 82 g Tighten the lamp fixing screw. h Install the lamp cover. Slide the cover back into place. i Tighten the lamp cover fixing screw. Warning Do not disassemble or remodel the lamp. Caution • Make sure you insta ll the lamp a nd lamp cover se cure ly. If they are not instal led correctly, the power does not turn on. • The lamp conta[...]

  • Página 84

    Maintenance 83 c Select Reset - Reset Lamp Hours . A reset confirmation message is displayed. d Use the buttons to select Yes , and then p ress the button to execute. The lamp ho urs are reset.[...]

  • Página 85

    Appendix 84 Optional Accessories and Consumables The following optional accessories/consumables are a vaila ble for purchase if required. This list of optional accessories/consumables is current as of: 2011.7 . Details of accessories are subject to change witho ut notice. Varies depending on country of purchase. Optional Items Name Model No. E xpla[...]

  • Página 86

    Appendix 85 Supported Resolutions Component Video Signal Refresh Rate (Hz) Resolution (dots) SDTV (480i) 60 720 x 480 SDTV (576i) 50 720 x 576 SDTV (480p) 60 720 x 480 SDTV (576p) 50 720 x 576 HDTV (720p) 50/60 1280 x 720 HDTV (1080i) 50/60 1920 x 1080 HDTV (1080p) 50/60 1920 x 1080 Composite Video Signal Refresh Rate (Hz) Resolution (dots) TV (NTS[...]

  • Página 87

    Appendix 86 HDMI1/HDMI2 Input Signal Signal Refresh Rate (Hz) Resolution (dots) VGA 60 640 x 480 SDTV (480i) 60 720 x 480 SDTV (576i) 50 720 x 576 SDTV (480p) 60 720 x 480 SDTV (576p) 50 720 x 576 HDTV (720p) 50/60 1280 x 720 HDTV (1080i) 50/60 1920 x 1080 HDTV (1080p) * 24/50/60 1920 x 1080 * When projecting in Wire lessHD, DeepColor 1080p 60/50 H[...]

  • Página 88

    Appendix 87 Specifications Product name EH-TW6000W/EH-TW6000/EH-TW5900 Appearance (not including adjustable foot) 420 (W) x 137.3 (H) x 365 (D) mm Panel Size 0.61" wide Display met hod Polysilicon TFT active matrix Resolution 1920 (W) x 1080 (H) x 3 Scanning Fre- quency Digital Pixel Clock: 13.5 - 148.5 MHz Horizontal: 15.63 - 67.5 kHz Vertica[...]

  • Página 89

    Appendix 88 Обладна ння відповідає вимогам Тех нічного реглам енту обмеження використання деяких небезпечних речовин в електричному та електронному обладнанні. Angle of tilt If you use the projector til ted at an angle of[...]

  • Página 90

    Appendix 89 DECLARATION of CONFORMITY According to 47CFR, Part 2 and 15 Class B Personal Compute rs and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We: Epson America, Inc. Located at: 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806 Tel: 562-290-5254 Declare under sole responsibility that the product [...]

  • Página 91

    Appendix 90 Glossary This section briefly explains the difficult terms that are n ot explained in context in the text of th is guide. For details, refer to other commerc ially available publications. HDCP HDCP is an abbreviation for High-bandwidth Digital Content Prote ction. It is us ed to pre- vent illegal copying and protect copyrights by encryp[...]

  • Página 92

    Appendix 91 General Notes All rights reserved. No part of this publication may be reproduced, stor ed in a retrieval system, or transmitted in any form or by any means, electr onic, mechanical, photocop ying, recordin g, or otherwise, without the prior written permission of Seiko Epson Corp oration. No patent liability is as sumed with respect to t[...]

  • Página 93

    Index 92 2 2-2 Pull-down ............... ...................... ............ 59 3 3D brightness ............ ........................ ............. 58 3D display ............ ................ ................. ............ 58 3D emitter ................. ........................ ............... 43 3D format ........... .............................[...]

  • Página 94

    Index 93 Input signal ................... ............... ............. 64, 65 Inverse 3D Glasses ............ ................ ............. 58 Inverse audio ................... .................. .............. 61 K Keystone ......... ...................... ..................... 26, 61 Keystone distortion ... .................... ............... [...]

  • Página 95

    Index 94 Tracking .......................... .................................. 58 Transmission range .......... ................ ............ 55 U USB ...................................... ............................... 51 User button ...................... ........................ ........ 63 V Video port .......................................[...]