Denso BHT-202B-CE/202BW-CE manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175

Ir a la página of

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Denso BHT-202B-CE/202BW-CE. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Denso BHT-202B-CE/202BW-CE o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Denso BHT-202B-CE/202BW-CE se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Denso BHT-202B-CE/202BW-CE, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones Denso BHT-202B-CE/202BW-CE debe contener:
- información acerca de las especificaciones técnicas del dispositivo Denso BHT-202B-CE/202BW-CE
- nombre de fabricante y año de fabricación del dispositivo Denso BHT-202B-CE/202BW-CE
- condiciones de uso, configuración y mantenimiento del dispositivo Denso BHT-202B-CE/202BW-CE
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Denso BHT-202B-CE/202BW-CE no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Denso BHT-202B-CE/202BW-CE y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Denso en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Denso BHT-202B-CE/202BW-CE, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Denso BHT-202B-CE/202BW-CE, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Denso BHT-202B-CE/202BW-CE. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

    Bar Code Handy Terminal B H T - 202B-CE/202BW-CE User ’ s Manual[...]

  • Página 2

     DENSO W A VE INCORPORA TED does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.  If it is judged by DENSO WAVE INCORPORATED that malfunction of the product is due to the product having been dropped or subjected to impact, repairs will be [...]

  • Página 3

    US and Canada Regulations This device complies with Part 15 of the FCC Rules, Canadian ICES-0 03 and RSS-210 Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference receiv ed, including interference that ma y cause undesired operation. NOTE: Th[...]

  • Página 4

    LABELING:  Grip style BHT For USA and Canada For USA and Canada For USA and Canada[...]

  • Página 5

    Declaration of Conformity (For Eur opean Union) The radio frequency module (T ype: LA-4137) that complies with the Directive 99/5/EC(R&TTE) is mounted on this device (BHT -202BW-CE). A Declaration of Conformity may be obtained from: http://www2.symbol.com/doc/[...]

  • Página 6

    i Pr eface Please READ through these operating instructions carefully . It will enable you to operate your BHT -202B-CE/202BW-CE correctly . The following contents are explained in this guide: • Handling and operating m ethods for the BHT-202B-CE/202BW-CE • Communication • Error messages • Specifications • Handling and operating m ethods [...]

  • Página 7

    ii How this book is organized This manual is made up of five chapters and appendices. Chapter 1 Quick Guide Describes the basic operating method of the BHT and the related notes. Chapter 2 Getting S tarted the BHT and System Menu Summarizes the BHT system configuration and describes the operation includin g preparation and System Mode (which is req[...]

  • Página 8

    iii  Related Publications BHT -200-CE API Reference Manual BHT -200-CE Class Library Reference Manual 2D Code Scanner/Barcode Scanner Keyboard Interface with BHT -CE kbifCE User ’s Guide  Screen In dication The lettering in the screens in this manual is a little different from that i n the actual screens. File names used are only for descri[...]

  • Página 9

    iv SAFETY PRECAUTIONS Be sure to observe all these safety pr ecautions.  Please READ through this manual carefully . It will enable you to use the BHT and CU correctly .  Always keep this manual nearby for speedy reference. S trict observance of these warnings and cautions is a MUST for preventing accidents that could result in bodily injury [...]

  • Página 10

    v Handling the battery cartridge • Never disassemble or heat the battery cartridge, nor put it into fire or water; doing so could cause battery-rupture or leakage of battery fluid, resulting in a fire or bodily injury . • Do not carry or store the battery cartridge t ogether with metallic ball-point pens, necklaces, coins, hairpins, etc. Doing [...]

  • Página 11

    vi Handling the CU • If smoke, abnormal odors or noises come from the CU, immediately unplug the AC adapter from the wall socket or CU and contact your nearest dealer . Failure to do so could cause fire or electrical shock. • If foreign material or water gets into the CU, immediately unplug the AC adapter from the wall socket or CU and contact [...]

  • Página 12

    vii Handling the battery cartridge • Never charge a wet or damp rechargeable battery cartridge. Doing so could cause the batteries to break, generate heat, rupture or burn. Handling the BHT • If smoke, abnormal odors or noises come from the BHT , immediately turn off the power , pull out the battery cartridge, and contact your nearest dealer . [...]

  • Página 13

    viii Handling the CU • Never disasse mble or modify the CU; doing so could result in an accident such as fire or malfunction. • Never put the CU in places where there are excessively high temperatures, such as inside closed-up automobiles, or in places exposed to direct sunlight. Doing so could affect the housing or parts, resulting in a fire. [...]

  • Página 14

    ix  Proper Care of the BHT and CU Clean the housings, BHT charge terminals, battery cartridge terminals, and CU-200 charge terminals with a dry , soft cloth. Before cleaning, be sure to turn the BHT power off and unplug the AC adapter of the CU. • Never use benzene, alcohol, or other organic solvents. The housing may be marred or the paint may[...]

  • Página 15

    x  DENSO W A VE INCORPORA TED does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.  If it is judged by DENSO WA VE INCORPORA T ED that malfunction of the product is due to the product having been dropped or subjected to impact, repairs wil[...]

  • Página 16

    Chapter 1 Quick Guide Chapter 2 Getting S tarte d the BHT and System Menu Chapter 3 Communications Operations of the BHT -202B-CE/202BW -CE Chapter 4 Error Messages Chapter 5 Handling the CU-200 (Option) Appendices[...]

  • Página 17

    1 Chapter 1 Quick Guide This chapter describes the basic operating method of the BHT and the related notes. 1.1 Reading Bar Codes ..........................................................................................................................................2 1.2 Setting and Using the Hand S trap and S tylus ..............................[...]

  • Página 18

    2 1.1 Reading Bar Codes T urn the BHT on, bring the bar-code reading window to the bar code to be scann ed, and press the trigger switch. Pressing the trigger switch halfway emits a laser light to indicate the scanning range and pressing it fully turns on the illumination LED to scan the bar code. When the BHT has read the bar code successfully , t[...]

  • Página 19

    Chapter 1 Quick Guide 3 • If the BHT fails to read due to specular effects or other factors, change the scanning angle of the rea ding windo w or the distance from codes as sho wn at right, and try it again. (S pecular effects occur when the reflection of the light from the bar code becomes e xce ssivel y strong. T his can easily hap pen when the[...]

  • Página 20

    4 1.2 Setting and Using the Hand S trap and St y l u s  Setting the hand strap  Using the hand strap Put your hand through the hand strap and hold the BHT as shown below . This will prevent you fro m dropping the BHT accidentally . Hand strap Hand strap[...]

  • Página 21

    Chapter 1 Quick Guide 5  Using the stylus The BHT has a touch screen LCD. With the stylus that comes with the BHT , you can operate keys, menus, and icons displayed on the touch screen. Before using the touch screen, be sure to set it up. (Refer to Chapter 2, Section 2.3.2, "Setting-up 2: Calibrating the touch screen.") • Always use [...]

  • Página 22

    6 1.3 Setting the Backlight Pressing the right-hand trigger switch ( M4 key) with the SF/ALP key held down activates or deactivates the backlight function. *For one minute if the BHT is placed on the CU. In user prog rams, you can select the key to be used for activatin g o r deactivating the back light function (instead of the initial setting : co[...]

  • Página 23

    Chapter 1 Quick Guide 7 1.4 Using the Keypad  Entering Numerical Data T o enter numerical data, use the numerical keys and the ENT key . For example, to enter the number "120," press the 1 , 2 and 0 keys and then press the ENT key . If you type in any wrong value, press the C/BS (BS) key and then enter the correct one.  Entering alp[...]

  • Página 24

    8 1.5 T ransferring Data  Using radio link (BHT -202BW -CE only) Using radio waves, the BHT -202BW-CE may transfer data to an access point in a spread spectrum communications system. If there are too many comm unications errors, first make sure that the BHT -202BW -CE points directl y at an access point. For data transfer using radio link, it is[...]

  • Página 25

    Chapter 1 Quick Guide 9  Using infrar ed link Using infrared rays, the BHT may transfer dat a directly to the host computer equipped with an IrDA interface port and other IrDA-compliant devices. • Mak e sure that there is no obstruction in the li ght path between the B HT and any tar get stations. I n infrared commu nication, you need to keep [...]

  • Página 26

    10  Using USB interface Using a USB interface cable, the USB interface ports of the BHT and a h ost computer can be connected, allowing data to be transferred to the host computer .  Using connector interface Using a connector interface cable, the RS-232C interface of a host computer and the conn ector interface port of the BHT can be connect[...]

  • Página 27

    11 Chapter 2 Getting S tarted the BHT and System Menu This chapter summarizes the BHT system configuration and describes the operation including preparation and System Menu (which is required for the efficient use of application programs). 2.1 BHT System Configuration .................................................................................[...]

  • Página 28

    12 2.1 BHT System Configuration The BHT barcode data collection system requires the following hardware as well as the BHT Bar Code Handy T erminal (which reads bar codes and accepts keypad entry), depending upon the intended system configuration. • Host computer: Allows you to edit, manage and download user programs and data, as well as downloadi[...]

  • Página 29

    Chapter 2 Getting Started the BHT and System Menu 13 In addition, the BHT -202BW-CE may operate in a radio communications system (spread spectrum communication) by connecting with access points by a wireless local area network (wireless LAN). • Access po int: Wireless communications base unit for the BHT Radio Communications System (av ailable w [...]

  • Página 30

    14 BHT Operating System (OS) Microsoft Windows CE .NET 5.0 Application Pr ogram Development Environment  PC for application development Item Description OS Microsoft Windows 2000 Professional Service Pack 2 or later , Microsoft Windows 2000 Server Service Pack 2 or later , or Microsoft Windows XP Professional CPU Pentium-II class processor , 450[...]

  • Página 31

    Chapter 2 Getting Started the BHT and System Menu 15  Application Development T ool Microsoft eMbedded V isual C++ 4.0 Service Pack 4 or later , Microsoft Visual S tudio .NET or Microsof t Visual S tudio .NET 2003 Y ou can download Microsoft eMbedded V isual T ools 4.0 and Service Pa ck 4 from the Microsoft W eb sit e at: (Microsoft eMbedded V i[...]

  • Página 32

    16 2.2 Components 2.2.1 Names and Functions Indicator LED Illuminates in blue when the BHT has successfully read a bar code. Synchronization LED* Flashes during wireless communication. T o uch screen LCD (li quid crystal display) Shows the characters and graphic patterns. Y ou may directly tap the screen with the st y lus for data entr y . Interfac[...]

  • Página 33

    Chapter 2 Getting Started the BHT and System Menu 17  Grip style BHT T rigger switch (M5 key) Press this switch to star t bar code reading. • Press this halfway to emit a laser light. • Press this fully to scan a ba r code.[...]

  • Página 34

    18 The functions of the keys may be set by user programs. Shown below is a set of sample functions. 30-key pad T rigger switch (M3 ke y) C (Clear) / BS (Backspace) key Moves back one character . Pressing this key with the SF key held down in BhtShell returns to the previous screen. Power key T urns the BHT on or off. T rigger switch (M4 key) SF (Sh[...]

  • Página 35

    Chapter 2 Getting Started the BHT and System Menu 19 26-key pad T rigger switch (M3 key) T rigger switch (M4 key) Magic keys [M1] to [M5]* These keys may be used as an SF key , ENT key , CTRL key , AL T key , T AB key , CLEAR key , backlight function on/off key , laser lighting key , or tri gger switch depending upon definition in System Menu or in[...]

  • Página 36

    20 2.2.2 S tatus Indicators on the LCD Windows desktop on 30-key pad type Windows desktop on 26-key pad type Battery volt age level Shows the current battery voltage level. Displays when the voltage level is high. Displays when the voltage level is low . The grip style BHT shows two icons as show n belo w . The upper one is for the battery cartridg[...]

  • Página 37

    Chapter 2 Getting Started the BHT and System Menu 21 Synchronization state (Provided on the BHT -202BW-CE) Displays the open state of the wireless device and the radio field intensity . Displays when the wireless device is open. Shows the radio field intensity with the number of bars. The radio field intensity icons ( , , and ) indicate that the ra[...]

  • Página 38

    22 2.2.3 Notes for Using the BHT  Windows desktop on the LCD The Windows desktop shown in this manual may be a little different fro m that in the actual screens on the LCD. (Windows desktop sample) This task tray also may be a little dif ferent from that in the actual screen.  No refr eshing of the LCD screen when on standby T o minimize the [...]

  • Página 39

    Chapter 2 Getting Started the BHT and System Menu 23 2.3 Pr eparation 2.3.1 Setting-up 1: Load ing the battery cartridge Before the first use of the BHT , be sure to load the battery cartridge as sho wn below . The battery cartridge is not loaded in the BHT when shipped from the factory .  Into the BHT body (1) Turn the BHT upside down. (2) Slid[...]

  • Página 40

    24  Into the grip (1) Take the bottom cover off the grip by removing the screw. (2) Pull the lock in the direction of the arrow and insert the battery cartridge into the grip with the boss facing as shown below. (3) Secure the bottom cover to the grip with the screw. Battery cartridge Boss Lock Bottom cover Grip Screw Bottom cover Screw[...]

  • Página 41

    Chapter 2 Getting Started the BHT and System Menu 25 • Never disassemble or heat the battery cartridge, nor put it into fire or water; doing so could cause battery-rupture or leakage of battery fluid, resulting in a fire or bodily injury . • Do not carry or store the battery cartridge together with met allic ball-point pens, necklaces, coins, h[...]

  • Página 42

    26  Battery V oltage Level on the S tatus Indicator Line The battery voltage level is always displayed on the status indicator line. (For details, refer to Section 2.2.2 "S tatus Indicators on the LCD.")  Low Battery Indication Low battery warning If the battery output voltage drops below a specified lo wer level limit when the BHT [...]

  • Página 43

    Chapter 2 Getting Started the BHT and System Menu 27 Grip style BHT As long as the voltage level of either one of battery cartridges loaded in the BHT body and grip is higher than the specified level, no low battery messages will appear . If any low battery message appears, therefore, you need to replace both battery cartridges. Even if you only ha[...]

  • Página 44

    28 2.3.2 Setting-up 2: Calibrating the touch scr een Press the power key to turn on the BHT . The calibration screen appears, so follow the on-screen instructions. If nothing appears, first perform a "cold boot" (refer to Section 2.3.5). The "+" appears first at the center of the screen as shown at left. T ap the center of the &[...]

  • Página 45

    Chapter 2 Getting Started the BHT and System Menu 29 2.3.3 Battery Replacement Notes  When is battery r eplacement needed? If the "Charge the battery!" appears on the LCD, replace the battery cartridge with a fully charged one. If you leave the BHT without replacing the battery cartridge, then the integrated calendar clock or data will[...]

  • Página 46

    30 2.3.4 BHT Turning-off Notes [ 1 ] "Shutdown in progress" message If you press the power key to turn off the BHT , the BHT displays the following message and starts preparation for shutdow n. When the above message is displayed, do not remove the battery cartridge. If you do so, the data stored in the BHT may be lost.[...]

  • Página 47

    Chapter 2 Getting Started the BHT and System Menu 31 [ 2 ] Backing up the Registry The Registry is the part of Windows CE that stores setup information required for operating the BHT .  Backing-up the Registry When the BHT is on, pressing the power key with the SF / ALP (SF) key held down displays the screen shown at right and starts backing up [...]

  • Página 48

    32 2.3.5 W arm and Cold Booting  W a rm-booting the BHT In any of the following cases, warm-boot the BHT : - The BHT makes no response to entry from the touch screen or keys. - The programs in the BHT malfunction due to any problems. Wa r m - b ooting the BHT will not erase data stored in th e RAM, but it will erase data being edited an d not be[...]

  • Página 49

    Chapter 2 Getting Started the BHT and System Menu 33  Cold-booting the BHT If a problem persists even after w arm-booting the BHT , cold-boot the BHT . Cold-booting the BHT will erase all data stored in th e RAM. It is recommended that important data be saved into the FLASH folder or up lo aded to the host computer . Cold booting procedure T urn[...]

  • Página 50

    34 2.4 Replacement of the Backup Battery If the following warning message appears on the LCD, you need to replace the backup battery (refer to Section 2.4.1). If you rem ove the bac ku p bat tery , the content s of t he m em ory m ay no l ong er be backe d u p so t hat t he data stored in t he BHT m ay be lost. It is recomm ended that important dat[...]

  • Página 51

    Chapter 2 Getting Started the BHT and System Menu 35 2.4.1 Replacing the Backup Battery Before proceedi ng to the replacement proc edure below , it is recommended that you sa ve importan t data into the FLASH folder or upload it to the host computer . (1) Turn the BHT upside down. (2) Slide the right and left releas e buttons in the direction of th[...]

  • Página 52

    36 (4) Pull the lock of the inside co ver to the right and towards you to release it. (5) Pull the right end of the clear insulation shee t up and out of the BHT. Lock Inside cover Inside cover Lock Battery pull strap Clear insulation sheet[...]

  • Página 53

    Chapter 2 Getting Started the BHT and System Menu 37 (6) Slide the backup battery cover to the right and take it out. (7) Lift up the backup battery, take its lead wires out of the groove, and disconnect the battery connector as shown below. Backup batter y co ver Backup batter y[...]

  • Página 54

    38 (8) Connect the connector of a new backup battery with the red lead facing to the left. (9) Route the lead wires inside t he guides through the groove. For easier routing, use a tool whose tip is thin and round. (10) Load the backup battery. (11) Slide the backup battery cover back into place. Backup batter y Guides Red lead Black lead Backup ba[...]

  • Página 55

    Chapter 2 Getting Started the BHT and System Menu 39 (12) Set the clear insulation sheet back into place while threading the battery pull strap through the cutout in the sheet. (13) Set the inside cover so that its lock and pawl become fitted between the printed circuit boards. Battery pull strap Clear insulation sheet Inside cover Pawl Lock[...]

  • Página 56

    40 (14) Push the battery cartridge into the BHT. The end of the battery pull strap should come out from the left edge of the battery cartridge. (15) Set the battery cartridge co ver back into place and return the right and left release buttons to the original position. Battery pull strap Battery cartridge Battery cartridge cover Release button Rele[...]

  • Página 57

    Chapter 2 Getting Started the BHT and System Menu 41 2.4.2 Resetting the Dis charge Counter If you replace the backup battery , reset the internal discharge counter in the BhtShell System Properties Menu. For detailed operation, refer to Section 2.5.4, "[3] System Properties Menu,  Backup Battery Discharge Counter ."[...]

  • Página 58

    42 2.5 Operating in System Menu 2.5.1 Desktop Upon completion of setting-up 2 (described in Section 2.3.2), the desktop appears on t he touch screen as shown below . Double-tapping icons on the desktop runs the corresponding programs.  My Device On the desktop, double-tap My D e v ice . The screen shown at left appears. With this program, you ca[...]

  • Página 59

    Chapter 2 Getting Started the BHT and System Menu 43  Recycle Bin On the desktop, double-tap Recycle Bin . The Recycle Bin opens. The Recycle Bin stores files you deleted in the BHT . T o retrieve files stored in the Recycle Bin, select th e file to be retrieved and choose File|Restore . T o delete a file(s) in the Recycle Bin from the BHT memor[...]

  • Página 60

    44 Configuring Proxy Serv er When the Internet Explorer runs, choose V iew |Internet Options to call up the Options window . T ap the Connection tab to display the screen sho wn at left. Make your settings.  Messenger On the desktop, double-tap Messenger . The screen shown at left appears.  Microsoft W ordPad On the desktop, double-tap Micros[...]

  • Página 61

    Chapter 2 Getting Started the BHT and System Menu 45  My Documents On the desktop, double-tap My D ocum ent s . The screen sho wn at left appears. With this program, you can browse the file information in the BHT .  Remote Desktop Co nnection On the desktop, double-tap Remote Desktop Connection . The screen shown at left appears.[...]

  • Página 62

    46 2.5.2 S tart Menu T ap the button in the bottom left corner of the desktop. The S tart menu appears where you can run programs and make system settings.  T erminal On the Star t menu, tap Pr o grams|Communication|T erminal . The screen shown at left appears. Y ou can create a new session.  Internet Explorer On the Star t menu, tap Pr o g r[...]

  • Página 63

    Chapter 2 Getting Started the BHT and System Menu 47  Command Prompt On the Star t menu, tap Pr ograms|Command Prompt . The screen shown at left appears.  Favorites On the Star t menu, tap Favor ites . Y our Favorites list appears. T o add items to your Favorites list, create a shortcut(s) of the desired file(s) in the Windowsfavorites fold[...]

  • Página 64

    48 Backlight Properties On the Control Panel window , double-tap Backlight , and the Backlight Properties window appears. - Backlight function ( * 1) Enable or disable the backlight function. If it is enabled, the backlight comes on when you press any key or tap the touch screen. - Backlight On-duration Set the ON-duration of the backlight that com[...]

  • Página 65

    Chapter 2 Getting Started the BHT and System Menu 49 BHTSettings On the Control Panel windo w , double-tap BHTSettings , and the BHTSettings window appears. For details, refer to Section 2.5.4. [3] “System Properties Menu." System Properties On the Control Panel window , double-tap System , and the System Properties window appears. T ap the [...]

  • Página 66

    50 Stylus Properties On the Control Panel window , double-tap Styl u s , and the S tylus Properties window appears. Y ou can adjust the double-tap speed. T ap the Calibration tab to display the window shown at left. T ab the Recalibrate to display the screen sho wn at left. Follow the on-screen instructions. Refer to Section 2.3.2 "Setting-up [...]

  • Página 67

    Chapter 2 Getting Started the BHT and System Menu 51 Dialing Properties On the Control Panel window , double-tap Dialing , and the Dialing Properties window appears. Y ou can set up the telephone line. Owner Properties On the Control Panel window , double-tap Ow ne r , and the Owner Properties window appears. T ap the Netw ork ID tab to display the[...]

  • Página 68

    52 V olume & Sounds Properties On the Control Panel windo w , double-tap V olume & Sounds , and the V olume & Sounds properties window appears. T ap the Vo l u m e tab to display the screen sho wn at left. Y ou can make the following settings: - Adjust the beeper volume except volumes for key entry and scre en taps - Enable/disable the [...]

  • Página 69

    Chapter 2 Getting Started the BHT and System Menu 53 Display Properties On the Control Panel window , double-tap Display , and the Display Properties window appears. T ap the Background tab to display the screen shown at left. Y ou can select wallpaper to be displayed on your desktop. T ap the Appearance tab to display the screen shown at left. Y o[...]

  • Página 70

    54 Connection On the Control Panel window , double-tap Network and Dial-up Connection , and the Connection window appears. Double-tap the "Make New Connection" icon starts Wiza rd. Follow the Wizard instructions and set the connection name and type. PC Connection Properties T ap the PC Connection tab to display the screen shown at left. Y[...]

  • Página 71

    Chapter 2 Getting Started the BHT and System Menu 55 Date/Time Properties On the Control Panel window , double-tap Date/T ime , and the Date/T ime Properties windo w appears. Y ou can specify the date, time and time zone. The entry range to th e year is 2003 to 2099. Input Panel Properties On the Control Panel window , double-tap Input Panel , and [...]

  • Página 72

    56  Ta s k b a r On the Star t menu, tap Settings|T askbar . The T askbar and S tart Menu window appears. T ap the General tab to display the screen shown at left. Y ou can customize the taskbar .  Run On the Star t menu, tap Run , and the screen shown at lef t appears. Y ou can run applications or open files.[...]

  • Página 73

    Chapter 2 Getting Started the BHT and System Menu 57 2.5.3 Operating in System Men u On the desktop, double-tap BhtShell . System Menu starts up to display the following screen: T o run the items in System Menu, tap the desired item or press the corresponding numerical key . T o quit System Menu, tap the or button located in the top right corner of[...]

  • Página 74

    58  S tructure of System Menu System Menu Double-tapping the BhtShell shortcut icon on the desktop start s up System Menu. Execute Program Executes a user program you select. (Refer to Section 2.5.4, [ 1 ].) Communication Communicates with the host computer . (Refer to Section 2.5.4, [ 2 ].) System Properties Sets a variety of environmental cond[...]

  • Página 75

    Chapter 2 Getting Started the BHT and System Menu 59 Hardware T est T ests a variety of hardware operations. (Refer to Section 2.5.4, [ 4 ].) Explorer Runs Explorer . (Refer to Section 2.5.4, [ 5 ].) System Information Shows the system program version and memory size. (Refer to Section 2.5.4, [ 6 ].) SF + C/BS (C) keys Menu 4 Menu 5 Menu 6[...]

  • Página 76

    60 2.5.4 Detailed Description of the Functions in System Menu [ 1 ] Execute Program Choosing "1:Execute Program" in System Menu calls up the screen shown at left. With this menu, you can start an application you want. ⇓ T ap the Brow se button. The screen shown at left appears. Select a file you want to run, check that the file name is [...]

  • Página 77

    Chapter 2 Getting Started the BHT and System Menu 61 [ 2 ] Communication Menu Choosing "2:Communication" in System Menu calls up the screen shown at left. [1] Ymodem: Switches to the Ymodem menu where you can set the Ymodem communications parameters and download/upload files. [2] ActiveSync (Infrared): Connects to the host computer via Ir[...]

  • Página 78

    62  Setting the communications environments T apping button on the Ymodem menu calls up the communications environments setting screen. When using connector interface T o communicate with the host computer via the connector interface port, select "Serial (COM1:)" in Port . T he screen shown at left appears. In BaudRate , Parit y , and [...]

  • Página 79

    Chapter 2 Getting Started the BHT and System Menu 63  Downloading S pecify a folder where you want to store a do wnloaded file and then tap button , and the BHT wait s for a file to be downloaded. If you download a file hav ing the same name as one already in the same folder , the newly downlo ade d file replaces the old one. ⇓ Upon completion[...]

  • Página 80

    64 If an error occurs during do w nloading If some error occurs during downloading, the BHT beeps three times and shows one of the following screens.  Problem The memory is insufficient for storing files to be downloaded.  Solution Delete unnecessary files in the memory or decrease t he size of the file to be downloaded.  Problem The path [...]

  • Página 81

    Chapter 2 Getting Started the BHT and System Menu 65  Problem Downloading has failed.  Solution Confirm the communications environment settings and then retry the download. It is also necessary to check the communications environment setup of the host computer .  Problem Downloading has aborted.  Solution Confirm the communications envi[...]

  • Página 82

    66  Uploading S pecify a file you want to upload and then tap button , and the BHT waits for a file to be uploaded. ⇓ Upon completion of uploading, the BHT sounds a long beep once and displays the screen shown at left. File you want to upload[...]

  • Página 83

    Chapter 2 Getting Started the BHT and System Menu 67 If an error occurs during uploading If some error occurs during uploading, one of the following screens will appear and the beeper beeps three times.  Problem The file you attempted to upload was opened.  Solution Close the file to be uploaded and then retry the upload.  Problem Uploadin[...]

  • Página 84

    68  Problem T imeout has occurred.  Solution Confirm the communications environment settings and communications log, then retry the upload. It is also necessary to check the communications environment setup of the host computer .  Problem No file has been correctly selected for uploading.  Solution Select a file(s) to be uploaded and re[...]

  • Página 85

    Chapter 2 Getting Started the BHT and System Menu 69 [2.2] ActiveSync (Infrared) Choosing "2:ActiveSync (Infrared)" on the Communication menu connects the BHT to the host computer via the IrDA interface port. Upon completion of connection, the screen shown at left appears. For details about the configuration of the host computer and conne[...]

  • Página 86

    70 [2.3] ActiveSync (Serial) Choosing "3:ActiveSync (Serial)" on the Communication menu connects the BHT to t he host computer via the connector interface port. After a connection is established, the screen shown at lef t appears. For details about the configuration of the host computer and connection using ActiveSync, refer to Chapter 3,[...]

  • Página 87

    Chapter 2 Getting Started the BHT and System Menu 71 [2.4] ActiveSync (USB) Choosing "4:ActiveSync (USB)" on the Communication menu connects the BHT to the host computer via the USB interface port. Upon completion of connection, the screen shown at left appears. For details about the configuration of the host computer and connection using[...]

  • Página 88

    72 [2.5] ActiveSync (RF) Choosing "5:ActiveSync (RF)" on the Communication menu connects the BHT to the host computer via the RF interface port. Before proceeding to "Activ eSync (RF)," you need to: - Set up a partnershi p between the host com puter and BHT by running "Acti veSync (Infrared)." - Make the RF s ett ings [...]

  • Página 89

    Chapter 2 Getting Started the BHT and System Menu 73 Upon completion of connection by ActiveSync, the screen shown at left appears. If connection to the network fails If connection to the network fails, the BHT beeps three times and displays the following screen.  Solution The RF settings may have not been made correctly . According to the proce[...]

  • Página 90

    74 [ 3 ] System Properties Menu Choosing "3:System Properties" in System Menu calls up the window shown at left. [1] Barcode: Opens the Barcode menu. [2] Beeper/Vibration: Opens the Beeper/Vibration menu. [3] Control Panel: Opens the Control Panel window. [4] File System: Opens the File System menu. [5] Power Management: Opens the Power M[...]

  • Página 91

    Chapter 2 Getting Started the BHT and System Menu 75 DECODE LEVEL You may set the decode level. Decreasing the level value increases the bar-code reading efficiency, but the BHT might misread low-quality bar codes (split or stained). To the contrary, increasing the level value decreases the bar-code reading efficiency, but it will diminish the poss[...]

  • Página 92

    76 [3.2] Beeper/Vibration Double-tap the "Beeper/V ibration", and the Beeper/Vibration property appears. On this menu, you can adjust the beeper volume and s witch the beeper and vibrator . Adjusting the beeper volume Choose the Vo l u m e tab to display the screen shown at left where you can select the beeper volume for the following ope[...]

  • Página 93

    Chapter 2 Getting Started the BHT and System Menu 77 [3.3] Control Panel Double-tap the "Control Panel", and the Control Panel window appears. With this menu, you can set up the basic Windows operating environment. For details, refer to Section 2.5.2 "  Control Panel." [3.4] File System Double-tap the "File System",[...]

  • Página 94

    78  Initializing the memory excluding the Registry Y ou can initialize the memory excluding the Registry and files stored in the FLASH folder . Initializing procedure (1) Tap the Initialize tab and select the RAM radio button. (2) Tap the Initialize button. ⇓ ⇑ (3) To initialize the memory, tap the Yes button; to return to the previous menu,[...]

  • Página 95

    Chapter 2 Getting Started the BHT and System Menu 79  Initializing the memory including the Registry Y ou can initialize the memory including the Registry but excluding files stored in the FLASH folder . Initializing procedure (1) Tap the Initialize tab and select the RAM radio button. (2) Select the Initialize Registry check box (3) Tap the Ini[...]

  • Página 96

    80  Initializing the FLASH folder Y ou can erase all information stored in the FLASH folder and let the folder revert to the initial state. Initializing procedure (1) Tap the Initialize tab and select the FLASH radio button. (2) Tap the Initialize button. ⇓ ⇑ (3) To initialize the memory, tap the Yes button; to return to the previous menu, t[...]

  • Página 97

    Chapter 2 Getting Started the BHT and System Menu 81  Running Scandisk thr ough the FLASH folder If the power to the BHT is shut down when the FLASH folder is being accessed, some broken file fragments may remain in the FLASH folder so that the free memory space will be decreased. T o remove or clear those fragments, run Scandisk through the FLA[...]

  • Página 98

    82 [3.5] Power Management Double-tap the "Power Management", and the Power Management property appears. Y ou can set the automatic power-of f tim er , the standby timer , and CPU clock. Automatic Power-Of f T ime: Battery Power: For the BHT being out of the CU, set the automatic power-off timer . (Default: 180) External Power: For the BHT[...]

  • Página 99

    Chapter 2 Getting Started the BHT and System Menu 83 [3.6] Key Double-tap the "Key", and the Key property appears. Y ou can define the functions of the following keys: - SF/ALP (SF) key - M1 key - M2 key - M3 key - M4 key - M5 key* - M3 key (pressed halfway) - M4 key (pressed halfway) - M5 key* (pressed halfway) *Available on the grip sty[...]

  • Página 100

    84 Defining the M1, M2, M3 (left-hand trigger sw itch), M4 (right-hand trigger sw itch), and M5* keys * M5 key available on the grip style BHT Choose the MAGIC Full-press tab on the Key definition menu to display the screen shown at left. Y ou can define each of the M1 through M5 * keys as any one of a trigger switch, shift key , enter key , backli[...]

  • Página 101

    Chapter 2 Getting Started the BHT and System Menu 85 If you define the M4 key as a backli ght function on/of f key , pressi ng the M4 key activates or deactivates the bac klight function. Note that the b acklight function on/o f f key c an be assi gned only to a ny one of M1 through M5 * keys and halfway pressed M3 through M5 * keys. The key define[...]

  • Página 102

    86 [3.7] Status Display Double-tap the "S tatus Display", and the S tatus Display property appears. Y ou can display or hide the following status indicators in the task tray: BATTERY: Battery voltage level RF Synchronization state SIP: Software input panel (Software keyboard) SHIFT: Keypad shift state CPU STANDBY: Standby state of the CPU[...]

  • Página 103

    Chapter 2 Getting Started the BHT and System Menu 87  Displaying the wireless module version and opening/closing the RF device T apping the Info tab on the NIC Control menu displays the screen shown at left. This menu displays the following: Driver V ersion: V ersion of the RF driver Firmware V ersion: Firmware version of the wireless module Har[...]

  • Página 104

    88  Setting the ESSID T apping the ID tab on the NIC Control menu displays the screen shown at left. Y ou can specify an ESSID (Extended Service Set ID) to be used on the communications network. For details about the ESSID, refer to Chapter 3, Section 3.1.2, "RF-Related Parameters."  Setting the RF options T apping the Option tab on[...]

  • Página 105

    Chapter 2 Getting Started the BHT and System Menu 89  Setting the WEP keys (Authentication: Open) (40-bit WEP) T apping the WEP tab on the NIC Control menu displays any of th e following three types of screens according to the authentication type. - At left: Open - Below at left: Shared key (40-bit WEP) - On the next page: Shared key (128-bit WE[...]

  • Página 106

    90  Displaying the current communications link status T apping the Link tab on the NIC Control menu displays the screen shown at left where the current communications link st atus appears in real-time. Associated Access Point: Displays the MAC address assigned to the wireles s interface of the associated access point. Signal S trength: Displays [...]

  • Página 107

    Chapter 2 Getting Started the BHT and System Menu 91  T esting with Ping T apping the Ping tab on the NIC Control menu displays the screen shown at left. Dest IP: S pecify the IP address of a host computer that you want to ping. Data size: S pecify the data size of an echo request. Interval: S pecify the echo request intervals (in units of 100 m[...]

  • Página 108

    92 Ping Echo Request Send T iming T wo types of echo request send timings are available: T ype 1 and T ype 2. The default is T ype 2. • Type1 After sending an echo request, Ping will wait for the period specified by Interval and then send an echo request again. For T ype 1, the relationship between the I nterval and T imeout should be "Inter[...]

  • Página 109

    Chapter 2 Getting Started the BHT and System Menu 93  Backup Battery Discharge Counter On the System Properties Menu, pressing the 0 key with the SF/ALP ( SF ) key held down calls up the screen shown at left. This screen displays the discharge count of the backup battery . If you replace the backup battery , tap the Reset button to reset the dis[...]

  • Página 110

    94 [ 4 ] Test Menu Choosing "4:T est" in Sy stem Menu calls up the screen shown at left. [1] BARCODE: Select the bar-code reading test. [2] BEEPER: Select the bee per scale test. [3] AGING: Select the aging test. [4] COM: Select the communications test. [5] DISPLAY: Select the LCD and indicator LED . [6] KEY VIBRATION: Select the key entr[...]

  • Página 111

    Chapter 2 Getting Started the BHT and System Menu 95 [4.1] Bar-code reading test Selecting "1: BARCODE" on the Hard T est menu calls up the screen shown at left. Actually read bar codes with the BHT and check that the barcode data read matches ones displayed on the LCD. ⇓ Upon completion of bar-code reading, the BHT beeps once, turns on[...]

  • Página 112

    96 [4.2] Beeper scale test Selecting "2:BEEPER" on t he Hard T est menu calls up the screen shown at left and sounds the beeper at three octaves listed below . Upon completion of this test, the BHT automatically returns to the Hard T est menu. Scale Frequency (Hz) do 523 1046 2093 4186 re 587 1174 2349 - mi 659 1318 2637 - fa 698 1396 279[...]

  • Página 113

    Chapter 2 Getting Started the BHT and System Menu 97 [4.4] Communications test In System Menu, you can test the IrDA interface port and USB interface port.  Preparation for the IrDA interface test Arrange two BHT s, one as a master station and the other as a slave station (to be t ested) with their IR ports facing each other as illustrated below[...]

  • Página 114

    98 Testing the IrDA interface port Selecting the "1:OPTICAL" on the COM menu calls up the screen shown at left. At the slave BHT to be tested, select the "1:SLA VE" and at the maste r BHT , select th e "2:MASTER." Then press the ENT key on each BHT . During the test, the screen shown at left is displayed. XXXXX: Transm[...]

  • Página 115

    Chapter 2 Getting Started the BHT and System Menu 99 If the IrDA interface test ends abnormally : If the test ends due to a timeout error , the tested slave BHT beeps three times and displays the screen as shown at left. This sample screen shows that an error has occurred at 2400 bps. If the test ends due to mismatch between the sent data and recei[...]

  • Página 116

    100 Testing the USB interface port Selecting the "2:USB" on the COM menu calls up the screen shown at left and start s connecting with the host computer using ActiveSync. For the configuration of the host computer and details about ActiveSync, refer to Chapter 3, Section 3.5 "ActiveSync." If ActiveSync connection succeeds v ia t[...]

  • Página 117

    Chapter 2 Getting Started the BHT and System Menu 101 To terminate the USB interface test There are two ways to terminate the USB interface test--"Disconnect the USB interface cable" and "Disconnect the link with the button in the task tray (as described below)." (1) Double-tap the ActiveSync icon (circled in red at left) in the[...]

  • Página 118

    102 [4.5] LCD and indicator LED tests Selecting "5:DISPLA Y" on the Hard T est menu calls up the test pattern shown at left on the LCD and turns on the indicator LED in blue. Each time the ENT key is pressed, the screen shifts to the next test pattern. To return to the previous screen, press the C/BS (BS) key. To stop this test while in p[...]

  • Página 119

    Chapter 2 Getting Started the BHT and System Menu 103 The checker pattern is reversed. C/BS (BS) key ⇑ ⇓ ENT key The gray screen appears with a one-dot wide white outline. C/BS (BS) key ⇑ ⇓ ENT key Forty eight right-angled triangles appear . C/BS (BS) key ⇑ ⇓ ENT key[...]

  • Página 120

    104 The gradation pattern appears. Press the ENT key , and the BHT returns to the Hard T est menu.[...]

  • Página 121

    Chapter 2 Getting Started the BHT and System Menu 105 [4.6] Key entry and vibrator test Selecting "6:KEY VIBRA TION" on the Hard T est menu calls up the screen shown at left and makes the BHT ready for entry from the keypad. Pressing individual keys displays the identifier letters in the positions pre-assigned to those keys on the LCD. Pr[...]

  • Página 122

    106 [ 5 ] Explorer Choosing "5:Explorer" in System Menu calls up the screen shown at left. [ 6 ] System Information Choosing "6:V ersion" in System Menu calls up the screen sho wn at left.[...]

  • Página 123

    Chapter 2 Getting Started the BHT and System Menu 107 2.6 W ireless Zer o Configuration (WZC) The screen on the left displays if a wireless local area network (wireless LAN) environment has not yet been established following purchase of the BHT unit. (BHT -202BW-CE only) If this screen does not display , doub le-tap the Wireless Zero Configuration [...]

  • Página 124

    108  IP Information T apping the IP Information tab on the WZC Menu displays the screen shown at left. Internet Protocol (TCP/IP) settings information displays at this menu. Renew: Updates with the latest information. Details: Displays detailed information. T apping the Details… button on the IP Information tab displays the screen shown at lef[...]

  • Página 125

    Chapter 2 Getting Started the BHT and System Menu 109  Wir eless Information Wireless Properties T apping the Wireless Information tab on the WZC Menu displays the screen shown at left. The SSID list for which a search was performed automatically by the BHT displays. If automatic recognition is not made, double-tap Add New… and manually input [...]

  • Página 126

    11 0 This key is provided automatically: Select this check box to automatically obtain the network key . Enable 802.1X authentication: Select this check box to enable 802.1X a uthentication. * This cannot be used in Ad hoc mode. • Security and Setting Method The security level can be changed based on combinations of the encryption and authenticat[...]

  • Página 127

    Chapter 2 Getting Started the BHT and System Menu 111 • Settings when PEAP , TLS Selected for EAP T y pe T apping the Properties… button on the Wireless Properties window displays the screen shown at left. Displays the User Certificate issuance information. Select the V alidate Server check bo x to enable the certificate server . Default: Enabl[...]

  • Página 128

    11 2 Advanced Wireless Settings T ap the Ad vanced… button from the Wireless Information tab to display the screen on the left. Use Windows to configure my wireless settings: Select this check box to automatically perform wireless network settings at Windows CE. This check box should always be selected. Preferred Networks: Displays the Preferred [...]

  • Página 129

    11 3 Chapter 3 Communications Operations of the BHT -202B-CE/202BW -CE Describes the communications operations of the BHT—the spread spectrum communication (BHT -202BW-CE only), infrared commun ication, USB interface specifications, co nnector interface specifications, basic communications specifications, communication using Ymodem, and ActiveSyn[...]

  • Página 130

    11 4 3.1 Spr ead Spectrum Communication The BHT-202BW-CE supports spread spectrum communication. 3.1.1 Notes for W ireless Operations • If there are too many communications errors, first make sure that the BHT -202BW-CE points directly at an access point because the 2.4-GHz band requires a more or less st raight line path. Note also that the low-[...]

  • Página 131

    Chapter 3 Communications Oper ations of BHT -202B-CE/202BW -CE 11 5 3.1.2 RF-Related Parameters Wireless communication between the BHT terminals and access point s that are connected to each other by a wireless LAN are command-controlled by user programs. For the setting procedure of RF-related p arameters, refer to Section 2.5.4, "[3.4] RF Me[...]

  • Página 132

    11 6  TRANSMIT KEY Y ou need to use the TRANSMIT KEY in order to choose and activate any one of the WEP KEY1 through WEP KEY4 already defined. If the size of the WEP KEY specified as a TRANSMIT KEY for the BHT is dif ferent from that for the access point, no communication is pos sible. Setting exam ple: Communication is possible - BHT : WEP KEY1[...]

  • Página 133

    Chapter 3 Communications Oper ations of BHT -202B-CE/202BW -CE 11 7 3.2 Infrared Communication The BHT has an integrated infrared (IR) communications device which enables wireless transfer of programs and data between the BHT and the host computer and between the BHTs, instead of the conventional wire transfer. The IR communications device features[...]

  • Página 134

    11 8 3.3 Connector interface specification The BHT-202BW-CE is equipped with a USB interface for interfacing with the host PC, and with a connector interface for communicating with the host PC. (1) Specification • USB1.1, Full-speed compliant • RS-232C interface (2) Connector : TCX3171 HOSIDEN Pin No Signal name Data direction 1 GND − 2 D+ (U[...]

  • Página 135

    Chapter 3 Communications Oper ations of BHT -202B-CE/202BW -CE 11 9 (3)-1 Interface circuit ( USB ) (3)-2 Interface circuit ( RS-232C ) Output circuit Input circuit TxD, R TS RxD, CTS Signal Level Item Min. T yp. Max. Output voltage ″ H ″ (3 K Ω load) 5V ―― 15V Output voltage ″ L ″ (3 K Ω lo ad) -15V ―― -5V Input voltage[...]

  • Página 136

    120 3.4 Basic Communications Specifications and Ymodem 3.4.1 Basic Communications Sp ecifications Listed below are the communications specifications when the BHT exchanges data with a host computer through the CU-200 (IrDA interface) or the connector interface*. IrDA Interface Connector Interface Synchronization Start-stop Transmission Speed 2400, [...]

  • Página 137

    Chapter 3 Communications Oper ations of BHT -202B-CE/202BW -CE 121  Transmission Code and Bit Order All characters should be coded to 7 or 8-bit code fo r data transmission. The transmission bit order is LSB (Least significant bit) first. What follows is an example for transmitting character A (41h, 01000001b) wi th an even parity and a single b[...]

  • Página 138

    122 3.4.2 Using Ymodem In System Menu and user programs, the BHT can use the Ymodem protocol with the following communications parameters: Port IrDA interface Connector interface Transmission Speed 2400, 9600, 19200, 38400, 57600 or 115200 bps 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600 or 115200 bps Character Length 8 bits 8 bits Vertica[...]

  • Página 139

    Chapter 3 Communications Oper ations of BHT -202B-CE/202BW -CE 123 3.5 ActiveSync With Microsoft ActiveSync, the BHT can exchange data with the host computer connected by IrDA, USB, connector interface , or spread spectrum communication (BHT -202BW-CE). ActiveSync enables the fo llowing: - Synchronize d data transmission - Backing up dat a - Copyin[...]

  • Página 140

    124 Setting up ActiveSync 3.7 Make ActiveSync connection settings according to the procedure below . S tart the inst alled ActiveSync 3.7, and the screen shown at left appears. ⇓ Choose File|Connection Settings . The screen shown at left appears. Click the check box "Allow serial cable or infrared connection to this COM port:" and selec[...]

  • Página 141

    Chapter 3 Communications Oper ations of BHT -202B-CE/202BW -CE 125 3.5.2 Connection Using ActiveSync When connected by IrDA, USB, or connec tor inter fac e  IrDA communication Arrange the BHT and host computer with their IrDA ports facing directly each other as shown below . No ActiveSync can be used for connection via the CU-201 (RS-232C interf[...]

  • Página 142

    126  Connector interface communication Connect the BHT (connector interface port) to the host computer (RS-232C interface) by usin g a connector interface cable as shown below . For ActiveSync operating procedures on the BHT , refer to Chapter 2, Section 2.5.4: "[2.5] ActiveSync (Serial)." Host Computer Connector interface cable BHT[...]

  • Página 143

    Chapter 3 Communications Oper ations of BHT -202B-CE/202BW -CE 127 Setting up a p artnership Upon completion of connection between the host computer and BHT , the host computer displays the screen shown at left. On this screen, set up a partnership betw een the host computer and BHT . Click the Ye s radio button and then click Next . ⇓ T ype an a[...]

  • Página 144

    128 Click Finish to complete the setup and return to Windows. The partnership between the BHT and host computer has been set up. For instructions on how to use ActiveSync, refer to its Help on the host computer . For debugging of user programs using ActiveSync, refer to the "BHT -200-CE API Reference Manual" or "BHT -200-CE Class Lib[...]

  • Página 145

    Chapter 3 Communications Oper ations of BHT -202B-CE/202BW -CE 129[...]

  • Página 146

    130 Chapter 4 Err or Messages This chapter lists the error messages which will appear on the LCD if some error occurs in the BHT. 4.1 System Errors .................................................................................................................. ..........................................131[...]

  • Página 147

    Chapter 4 Error Messages 131 4.1 System Err ors If some error occurs when the power is turned on or during program ex ecution, one of the following error messages will appear on the LCD. System Program error  Problem A System Program error has occurred. If this error occ urs, the B HT b eeps five tim es (for 0.1 seco nd pe r beep) and then turns[...]

  • Página 148

    132 Shut dow n due to low battery  Problem When the power is turned on or off or during execution o f applications, the battery output level has lowered so that the BHT no longer operates. If lower battery is detected, the BHT beeps five times (for 0.1 second per beep) and then turns itself off. Depending upon the battery level, t he beeper may [...]

  • Página 149

    Chapter 4 Error Messages 133[...]

  • Página 150

    134 This chapter describes the handling procedure of the communication unit CU-200, the interfacing with the host PC, and the charging of the rechargeable battery cartridge. 5.1 Functions of the CU-200 .................................................................................................................................135 5.2 Components [...]

  • Página 151

    Chapter 5 Handling the C U-200 (Option) 135 5.1 Functions of the CU-200 The optical communication unit CU-200 series is available in t wo models: CU-201 and CU-221. The CU-200 series has the following functions: (1) Data exchange function The CU-201/221 exchanges data and programs between the BHT and the host PC. Interface with the BHT: IrDA interf[...]

  • Página 152

    136 5.2 Components and Functions St atus ind i cators POWER LED (green) Lights when the power is applied to the CU. DA TA Communications LED (gr een) Lights when the BHT is communicating with the host PC. IrD A interface port Used to exchange data optically with the BHT . BHT charge terminals Do not stain these terminals; doing so could result in a[...]

  • Página 153

    Chapter 5 Handling the C U-200 (Option) 137 5.3 Applying Power to the CU-200 CU-201: The CU-201 should be powered from a wall socket via the dedicated AC adapter . Connec t the outlet plug of the AC adapter to the power inlet connector of the CU-201, then plug the other end into a wall socket. CU-221: The CU-221 should be powered from a wall socke [...]

  • Página 154

    138 • If you are not u sing th e CU for a long time, be sure to unp lu g the AC adapter from the wall socket for safety . Failure to do so could result in a fire. • When caring fo r the CU, unplug the AC adapt er from the wall socket for safety . Failure to do so coul d result in an electrical shock. • Never cover or wrap up the CU or AC adap[...]

  • Página 155

    Chapter 5 Handling the C U-200 (Option) 139 5.4 Communicating with the Host PC 5.4.1 Setting the Transmi ssion Speed of the CU-200 CU-201: Set the transmission speed to the same value as that of the BHT and host PC, by using the DIP switch. CU-221: The transmission speed is a utomatically determined by the host PC. The DIP switch is located next to[...]

  • Página 156

    140 5.4.2 Interface Cable Connection (1) Unplug the AC adapter of the CU-200 from the wall socket. (2) Make sure that the host PC is turned off. (3) CU-201: Connect the RS-232C interfa ce cable to the interface port of the CU-201. CU-221: Connect the USB interface c able to the interface port of the CU-221. (4) Connect the other end of the RS-232C/[...]

  • Página 157

    Chapter 5 Handling the C U-200 (Option) 141 5.4.3 Interfacing with the Host PC This section describes how to start communication with the host PC fro m System Menu. The same may apply when you use a user program. (1) Turn the host PC on to run Windows. (2) CU-201: Plug the AC adapter into a wall socket. CU-221: Plug the AC adapter into a wall socke[...]

  • Página 158

    142 5.5 Charging the Rechargeable Battery Cartridge (using the CU-200) Y ou can charge a rechargeable battery cartridge loaded in the BHT . Be sure to turn the BHT off before starting charging. Service Life of Rechar geable Battery Cartridge: Lithium-ion batteries u sed in the rech argeable ba ttery cartridge will gradua lly deteriorate during the [...]

  • Página 159

    Chapter 5 Handling the C U-200 (Option) 143  Charging Operation and LED Indication Operator's Action CU-200 St at us Charge LED on the BHT On standby ⇓ Place the BHT on the CU-200. ⇓ Chargi ng ⇓ After approx. 3 hours (approx. 5.5 hours*) when the CU-201/221 is powered from the AC adapter After approx. 9 hours (approx. 21 hours*) when [...]

  • Página 160

    144 5.6 Interface Specifications [ 1 ] Interface Connector and Pin Assignment CU-201 The CU-201 has an RS-232C interface port (Dsub-9P). RS-232C interface port (Dsub-9P) on the CU -201 Pin No. Signal Functions Signal Input/Output CU-201 External device 2 RD Receive data ← 3 SD Send data → 4 ER Data terminal equipment ready → 5 SG Signal groun[...]

  • Página 161

    Chapter 5 Handling the C U-200 (Option) 145 [ 2 ] Interface Cable Connection CU-201 As illustrated below , connect the CU-201 (on which the BHT is put) to a host PC with a cross-mode cable. T o connect it to a modem, use a straight-mode cable. Cable Connection b etween CU-201 and Hos t PC Cable Connection b etween CU-201 and Modem DTE and DCE In th[...]

  • Página 162

    146 Appendix A. S pecifications ................................................................................................................. .............................147 A.1 BHT -202B-CE/202BW-CE ........................................................................................................... ......................147 [ 1 ] Produ[...]

  • Página 163

    Appendices 147 Appendix A. Specifications A.1 BHT-202B-CE/202BW-CE [ 1 ] Product Specifications Power Source Main power Rechargeable lithium-ion battery cartridge (3.7 VDC) Dimensions (W) x (L) x (H) 90 x 186 x 44 mm (3.5 x 7.3 x 1.7 i nches) Weight Regular style B HT Grip style BHT Approx. 380 g (Approx. 13.4 oz.) including b attery cartridge Appr[...]

  • Página 164

    148 [ 2 ] Bar Code Specifications (1) Available Bar Code Types Bar code type Bar dimensions Readable magnificatio n Universal product codes EAN-13 EAN-8 UPC-A UPC-E EAN-13 with add-on EAN-8 with add-on UPC-A with ad d-on UPC-E with ad d-on 2-digits add-on 5-digits add-on 0.26 mm min. (10.24 mils min.) 0.8 min. Interleaved 2of5 (IT F) Standard 2of5 [...]

  • Página 165

    Appendices 149 (3) Bar Code Label Size Recommended width: 10 mm min. (0.39 inch min.) Depth of field (Distance from bar codes to the reading window) Length of labels (including margins) Length: 700 mm (27.56 inches) 400 mm max. (15.75 inches max.) (Minimum narrow bar width: 0.635 mm min.)* 6 (4) Thickness of Bars and Depth of Field Minimum narrow b[...]

  • Página 166

    150 Connector Interface Specification: USB1.1, Full-speed compliant, RS-232C interface Connector: TCX3171 HOSIDEN Pin assignment: See below. Pin No Signal name Data direction 1 GND − 2 D+ (USB) Input / Output 3 D- (USB) Input / Output 4 VBUS (USB) − 5 CTS (RS-232C) Input 6 RxD (RS-232C) Input 7 R TS (RS-232C) Output 8 TxD (RS-232C) Output (Note[...]

  • Página 167

    Appendices 151 A.2 CU-200 [ 1 ] Product Specifications CU-201 CU-221 Power Source 100 to 240 VAC, 50/60 Hz, 0.2 A (5 VDC: Use AC adapter) Supplied via the USB cable* Power Consumption (AC adapter output) 5 VDC, 1500 mA 5 VDC, 500 mA Dimensions (W) x (L) x (H) 114 x 140 x 87 mm (4.49 x 5.51 x 3.43 inches) 114 x 134 x 87 mm (4.49 x 5.27 x 3.43 inches[...]

  • Página 168

    152 [ 3 ] Interface Specifications CU-201 RS-232C interface port (Dsub-9P) on the CU -201 Pin No. Signal Functions Signal Input/Output CU-201 External device 2 RD Receive data ← 3 SD Send data → 4 ER Data terminal equipment ready → 5 SG Signal ground ― 6 DR Data set ready ― 7 RS Request to send ― 8 CS Ready to send ― Shown below i s a[...]

  • Página 169

    Appendices 153 Appendix B. Loading an Optional Compact Flash Card Load an optional Compact Flash card to the BHT using the following procedure. (1) Turn the BHT upside down. (2) Slide the right and left release buttons in the direction of t he arrows to remove the battery cartridge cover . (3) Pull up the battery pull strap to remove the battery ca[...]

  • Página 170

    154 (4) Pull the lock of the inside co ver to the right and towards you to release it. (5) Insert a Compact Flash card into the slot with the connector facing the slot and with the top facing down. Lock Inside cover Inside cover Lock Compact Flash card (with the top fac ing down)[...]

  • Página 171

    Appendices 155 T o remove the Compact Flash card, press the card release button provided at the left of the card as shown below . (6) Set the inside cover so that its lock and pawl become fitted between the printed circuit boards. Inside cover Pawl Lock Compact Flash card Card release button[...]

  • Página 172

    156 (7) Push the battery cartridge into the BHT . The end of the battery pull strap should co me out from the left edge of the battery cartridge. (8) Set the battery cartridge cover back into place and return the right and left release buttons to the original position. Battery pull strap Battery cartridge Battery cartridge cover Release button Rele[...]

  • Página 173

    Appendices 157 Appendix C. Quality Assurance Standards C.1 Interface Cables With the interface cables described in this section, DENSO WAVE has run the quality assurance test conforming to the EMC Directive for the BHT-202B-CE/202BW-CE and CU-200. Any connectors other than those specified here are not acceptable. They may cause the BHT or CU to fai[...]

  • Página 174

    [...]

  • Página 175

    BHT -202B-CE/202BW - CE User's Manual First Edition, June 2006 DENSO W A VE INCORPORA TED The purpose of this manual is to provide accurate information in the handling and operating of the BHT -202B-CE/202BW-CE. Please feel free to send your comment s regarding any errors or omissions you may have found, or any suggestions you may have for gen[...]