Datalogic Scanning 400 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142

Ir a la página of

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Datalogic Scanning 400. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Datalogic Scanning 400 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Datalogic Scanning 400 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Datalogic Scanning 400, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones Datalogic Scanning 400 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Datalogic Scanning 400
- nombre de fabricante y año de fabricación del dispositivo Datalogic Scanning 400
- condiciones de uso, configuración y mantenimiento del dispositivo Datalogic Scanning 400
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Datalogic Scanning 400 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Datalogic Scanning 400 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Datalogic Scanning en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Datalogic Scanning 400, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Datalogic Scanning 400, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Datalogic Scanning 400. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

    MA TRIX 400™ Reference Manual[...]

  • Página 2

    Datalogic Automation S.r.l. Via S. Vitalino 13 40012 - Lippo di Calderara di Reno Bologna - Italy Matrix 400™ Reference Manual Ed.: 12/2008 ALL RIGHTS RESERVED Datalogic reserves the right to make modificati ons and improvements without prior notification. Datalogic shall not be lia ble for technical o r edit orial errors or omissions contained h[...]

  • Página 3

    iii CONTENTS REFERENCES ............................................................................................................ vi Conventions ................................................................................................................. vi Reference Documentation .............................................................[...]

  • Página 4

    iv 4.3 ID-NET™ Interface ..................................................................................................... 50 4.3.1 ID-NET™ Cables ........................................................................................................ 50 4.3.2 ID-NET™ Response Time .........................................................[...]

  • Página 5

    v 8.4.6 Region Of Interest Windowing .................................................................................. 117 8.4.7 Direct Part Marking Applications............................................................................... 118 8.5 Image Capture and Decoding .........................................................................[...]

  • Página 6

    vi REFERENCES CONVENTIONS This manual uses the following conventions: "User" refers to anyone using a Matrix 400™ reader. "Reader" refers to the Matrix 400™ reader. "You" refers to the System Administrator or Technical Support person using this manual to install, configure, operate, maintain or troubleshoot a Matri[...]

  • Página 7

    vii COMPLIANCE For installation, use and maintenance it is not necessary to o pen the reader. EMC COMPLIANCE In order to meet the EMC requirements:  connect reader chassis to the plant earth gr ound by means of a flat copper braid shorter than 100 mm;  for CBX connections, connect the pin "Earth" to a good Earth Ground  for direc[...]

  • Página 8

    viii HANDLING The Matrix 400™ is designed to be used in an industrial environment and is built to withstand vibration and shock when correctly installed, however it is also a precision prod uct and therefore before and during installation it must be handled correctly to avoid damage.  avoid that the readers are dropped (exceeding shock limits)[...]

  • Página 9

    ix  do not weld the reader into position which can cause electrostatic, heat or reading window damage.  do not spray paint near the reader which can cause reading window damage.[...]

  • Página 10

    x GENERAL VIEW Matrix 400™ Figure A 1 2 3 4 9 8 7 Device Clas s Label Mounting Holes (12) Lens Cover Lens (separate accessory) "POWER ON" LE D Power - Se rial Int erface s - I/O Conne ctor Ethernet Connector (Et hernet Models Only ) 6 HMI X-PRESS™ Interface 5 Internal Illuminator (separate accessory) Ethernet Connection LED (Ethernet [...]

  • Página 11

    RAPID CONFIGURATION 1 1 1 RAPID CONFIGURATION STEP 1 – ASSEMBLE THE READER The first step to perform is to assemble the accessories that make up the Matrix 400™ reader. The lens and either an internal or an external illuminator must be us ed. This procedure shows an internal illuminator. CAUTION Matrix 400™ must be disconnected from the power[...]

  • Página 12

    MATRIX 400™ REFERENCE MANUAL 2 1 Required Access ories The following table shows the corr ect lens/illuminator combinations to be use d for Matrix 400™ imager assembly. Lenses Internal Illuminators 93ACC1793 LNS-1006 6 mm C-Mount Lens (only for Matrix 400 600-0x0 mo dels) 93A401020 93A401022 LT-002 LT-004 Red Wide Angle White Wide Angle 93ACC17[...]

  • Página 13

    RAPID CONFIGURATION 3 1 CBX100/CBX500 Pinout for Matrix 400™ The table below gives the pinout of the CBX100/CBX500 terminal block connectors. Use this pinout when the Matrix 400™ reader is connected by means of the CBX100/CBX500: CBX100/500 Terminal Block Connectors Input Power Outputs Vdc Power Supply Input Voltage + +V Power Source - Outputs [...]

  • Página 14

    MATRIX 400™ REFERENCE MANUAL 4 1 19-pin Connector P inout for Matrix 400™ The table below gives the pinout of the 19-pin M16 male connector for connection to the power supply and input/output signals. Use this pinout when the Matrix 400™ reader is connected by means of the 19-pin connector: Figure 3 - 19-pin M16 Ma le Connector 19-pin M16 mal[...]

  • Página 15

    RAPID CONFIGURATION 5 1 STEP 3 – MOUNT AND PO SITION THE READER 1. To mount the Matrix 400™, use the mounting brackets to obtain the most suitable position for the reader. Two of the most common mounting configurations are shown in the figures below. Other mounting solutions are provided in par. 3.3. Figure 4 –Positioning wi th Mounting Brack[...]

  • Página 16

    MATRIX 400™ REFERENCE MANUAL 6 1 3. Refer to the Reading Features table in chp. 7 for FOV calculation and minimum distance requirements according to the base/lens combination used for your application. NOTE Rapid Configuration of the Matrix 400™ reader can be made either through the X-PRESS™ interface (steps 4-6) which requires no PC connecti[...]

  • Página 17

    RAPID CONFIGURATION 7 1 FOV Blue Diamond™ in focus Figure 8 – Focus Function Using Blue Dia monds™ 6. Exit the Focus functio n by pressing the X-PRESS™ push button once. The Blue Diamonds™ turn off. 7. Replace the lens cover, screwing it tightly to the base. STEP 5 – CALIBRAT E IMAGE DENSITY In order to function correctly to the fullest[...]

  • Página 18

    MATRIX 400™ REFERENCE MANUAL 8 1 Setup 5. Enter the Setup function by pressing and holding the X-PRESS™ push button until the Setup LED is on. 6. Release the button to enter the Setup function. The Setup LED will blink until the procedure is completed. The Setup procedure ends when the Image Acquisition parameters are success fully saved in the[...]

  • Página 19

    RAPID CONFIGURATION 9 1 STEP 6 – X-PRESS™ CONFIGURATION Once Matrix 400 ™ has calibrated image density, you can configure it for optimal code reading relative to your application. This configuration can be performed either through the X- PRESS™ Interface or the VisiSet™ configuration program. Locate 1. Enter the Focus function by pressing[...]

  • Página 20

    MATRIX 400™ REFERENCE MANUAL 10 1 Learn 8. Enter the Learn function by pressing and holding the X-PRESS™ push button until the Learn LED is on. 9. Release the button to enter the Learn function. The Learn LED will blink until the procedure is completed. The Learn procedu re ends when the I mage Processing and Decoding p arameters are suc ces sf[...]

  • Página 21

    RAPID CONFIGURATION 11 1 STEP 7 – INSTALLING VISISE T™ CONFIGURATION PROGRAM VisiSet ™ is a Datalogic reader configuration tool providing several important advantages:  Setup Wizard for rapid configuration and new users;  Defined configuration directly stored in the reade r;  Communication protocol independent from the physical inter[...]

  • Página 22

    MATRIX 400™ REFERENCE MANUAL 12 1 Set the communication parameters from the "Options" menu. Then select "Connect", the following window appears: Figure 16 - VisiSet™ Ma in Window After Connection STEP 8 – CONFIGURATIO N USING SETUP WIZARD The Setup Wizard option is advised for rapid configuration or for new users. It allow[...]

  • Página 23

    RAPID CONFIGURATION 13 1 2. Remove the lens cover in order to focus the reader and loosen the two Locking Knobs on the lens. Adjust the Focus ring to the " Far position " and the Diaphragm ring to the " F4 " 2 number setting which is the preferred setting for installation. Place the Grade A Barcode Test Chart in f ront of the re[...]

  • Página 24

    MATRIX 400™ REFERENCE MANUAL 14 1 4. Select a Calibration Mode choice and press the "Calibrate" button. Th e reader flashes once acquiring the image and auto determines the best exposure and gain settings. If the code symbology is enabled by default, the code will also be decoded. 5. Press the "Fine Focusing" button to activat[...]

  • Página 25

    RAPID CONFIGURATION 15 1 Continue rotating the Focusing ring on the lens a little farther; the Current Focus Quality Bar decreases (red) see below. Rotate the Focusing ring in the opposite direction. The Current Focus Quality Bar (green) increases towards the vertical optimal focus line (green) until the optimal fo cus is reached; the Current Focus[...]

  • Página 26

    MATRIX 400™ REFERENCE MANUAL 16 1 6. Select a Code Setting Mode choice and press the "Code Setting" button. Using the Grade A Barcode Test Chart , this step performs image density calibration in order for Matrix 400™ to function correctly and to the fullest extent of its capabilities. The Setup Result section of the Setup Wizard windo[...]

  • Página 27

    RAPID CONFIGURATION 17 1 8. Select a Saving Options choice and press the "Save" button. 9. Close the Setup Wizard. NOTE If your application has been configured using the VisiSet™ Setup Wizard, your reader is ready. If necessary you can use VisiSet™ for advanced reader configuration.[...]

  • Página 28

    MATRIX 400™ REFERENCE MANUAL 18 1 STEP 9 – TEST MODE Use a code suitable to your application to test the reading pe rformance of the system. 1. Enter the Test function by pressing and holding the X-PRESS™ push button until the Test LED is on. 2. Release the button to enter the Test function. Once entered, the Bar Graph on the five LEDs is act[...]

  • Página 29

    RAPID CONFIGURATION 19 1 ADVANCED READER CONFIGURATION For further details on advanced product configuration, refer to the VisiSet™ Help On-Line. The following are alternative or advanced reader configuration methods: Advanced Confi guration Using VisiSet™ Advanced configuration can be performed through the VisiSet™ program by selecting Devic[...]

  • Página 30

    MATRIX 400™ REFERENCE MANUAL 20 2 2 INTRODUCTION 2.1 PRODUCT DESCRIPTION Matrix 400™ is a Datalogic industrial compact 2D imager designed and produced to be a high performance affordable solution for bot h linear and two-dimensional code reading applications. Matrix 400™ uses imaging technology and provi des complete reading system functions [...]

  • Página 31

    INTRODUCTION 21 2 Standard Application Program A Standard Application Program is factory-loaded onto Matrix 400™. This program controls code reading, data formatting, serial port and Ethernet interfacing, and many other operating and control parameters. It is completely user configurable from a Laptop or PC using the dedicated configuration softw[...]

  • Página 32

    MATRIX 400™ REFERENCE MANUAL 22 2 Ease of Setup  Quick installation without PC by using X-PRESS™ interface for easy and intuitive setup  Blue Diamonds™ aiming and focusing system  Automatic Imager calibration and Code Settings  Calibration Tool to verify exact code positioning in the Field of View and to maximize the reading perfo[...]

  • Página 33

    INTRODUCTION 23 2 Industrial Strength  Industrial compact 2D reader  Rugged full metal construction  Sealed circular connectors  IP67 protection class  50 °C max operating temperature  Supply voltage ranges from 10 to 30 Vdc The reader is particularly suitable for industrial environments where protection against harsh external co[...]

  • Página 34

    MATRIX 400™ REFERENCE MANUAL 24 2 2.2 INDICATORS AND KEYPAD BUTTON Figure 19 - Indi cators The following LED indicators are located on the reader: NET yellow LED indicates connection to the on-board Ethernet ne twork (for Ethernet models) ( Figure 19, 1) PWR blue LED indicates that the read er is connected to the power supply ( Figu re 19, 2) In [...]

  • Página 35

    INTRODUCTION 25 2 2.3 ID-NET™ The ID-NET™ network is a built-in high-speed interface dedicated for high-speed reader interconnection. ID-NET™ is in addition to the Main and Auxiliary serial interfaces. The following network configurations are available:  ID-NET™ M/S Synchronized: Single station – multiple readers ID-NET™ interface al[...]

  • Página 36

    MATRIX 400™ REFERENCE MANUAL 26 2  ID-NET™ M/S Multidata: Multiple stations – single reader ID-NET™ interface allows connection of readers reading objects placed on independent conveyors. All readers are typically locat ed far away from each other and they use a dedicated presence sensor. At the end of each reading phase, each reader tra[...]

  • Página 37

    INTRODUCTION 27 2 7. Configure the other device parameters via VisiSet™ [Operating Mode, Calibration, Data Collection parameters, etc.]. 8. If using the CBX connection box equipped with a BM100 Backup module, perform Device Backup at the Slave. The Slave device is now Configured. Repeat t hese steps for each Slave reader i n the ID- NET™ networ[...]

  • Página 38

    MATRIX 400™ REFERENCE MANUAL 28 2 2.4 X-PRESS™ HUMAN MACHINE INTERFACE X-PRESS™ is the intuitive Human Machine Interface designed to improve ease of installation and maintenance. Status information is clearly present ed by means of the five colored LEDs, whereas the single push button gives immediate access to the following relevant functions[...]

  • Página 39

    INTRODUCTION 29 2 READY green green y ellow y ellow red SETUP FOCUS T ES T LEARN GOOD T RIGGER COM STATUS READY green green y ellow y ellow red SETUP FOCUS T ES T LEARN GOOD T RIGGER COM STATUS READY green green y ellow y ellow red SETUP FOCUS T ES T LEARN GOOD T RIGGER COM STATUS  Release button to enter Setup Mode  Release button to enter L[...]

  • Página 40

    MATRIX 400™ REFERENCE MANUAL 30 2 Setup (Function 3) Onc e e nte re d, t he ima ge r a uto mat ic al ly p erf or ms Image Acquisition parameter calibration fo r the specific code presented to it. The Setup LED will blink until the procedure is completed. The Setup procedure en ds when the Image Acq uisition parameters a re successfully saved in t[...]

  • Página 41

    INTRODUCTION 31 2 2.6 ACCESSORIES The following accessories can be used with the Matrix 400™ reader. Accessory Description Order No. Lenses LNS-1006 6 mm C-Mou nt Lens 93ACC1793 LNS-1109 9 mm C-Mou nt Lens 93ACC1794 LNS-1112 12.5 mm C-M ount Lens 93ACC1795 LNS-1116 16 mm C-Mo unt Lens 93ACC1796 LNS-1125 25 mm C-Mo unt Lens 93ACC1797 LNS-1135 35 m[...]

  • Página 42

    MATRIX 400™ REFERENCE MANUAL 32 2 The following table shows the corr ect lens/illuminator combinations to be use d for Matrix 400™ imager assembly. Lenses Internal Illuminators 93ACC1793 LNS-1006 6 mm C-Mount Lens (only for Matrix 400 600-0x0 mo dels) 93A401020 93A401022 LT-002 LT-004 Red Wide Angle White Wide Angle 93ACC1794 LNS-1109 9 mm C-Mo[...]

  • Página 43

    INTRODUCTION 33 2 Matrix 400™ assures the reading of deformed and / or overprinted codes, even though damaged or printed on high reflective surfaces (see Figures 22, 23, 24). Figure 22 - Unido se Flow-Pack wi th PDF417 Code Figure 23 - Over printed Barcode Readable by Matrix 400™ also Thro ugh the Envelope Window Film Figure 24 - Barcode Printe[...]

  • Página 44

    MATRIX 400™ REFERENCE MANUAL 34 2 Figure 26 - Dot Peening Marking on Metal Surface with Multi-dot per Code Element Figure 27 - Directly Marked Do t Matrix Code Characterized by Outstanding Separation Distance b etween Adjacent Code Ele ments Figure 28 - DataMatrix Code Directl y Marked on PCB Surface by Using Laser Etch ing Technology Figure 29 -[...]

  • Página 45

    INTRODUCTION 35 2 2.8 EXTERNAL LIGHTING SYSTEMS In some direct part marking applications best reading results are obtained by using an external lighting system. A series of acce ssory illuminators are available which cover a variety of applications. The LT-100 Cone Lighting System provides a circ ular symmetrical light source designed for the follo[...]

  • Página 46

    MATRIX 400™ REFERENCE MANUAL 36 2 The LT-210 Mini Spot Lighting System provides a high intensity light source designe d for the following applications:  with uneven, noisy and scratched surfaces  where dot peening or laser etching codes are directly marked onto metal surfaces or PCBs and need to be highlighted. Here the use of more than one[...]

  • Página 47

    INTRODUCTION 37 2 The LT-316 60° Dark Field Ring Lighting System is designed for reading codes pr oduced by Dot Peening (especially by a 120° stylus) or Laser Etching on flat, reflective parts. Figure 35 - LT-316 60° Dark Field Ring Lighting System The LT-410 Coaxial Lighting System is an axial diffuse illuminator designed fo r reading codes pro[...]

  • Página 48

    MATRIX 400™ REFERENCE MANUAL 38 2 The LT-511 Dome Lighting System is a diffuse dome light de signed for reading printed label or Direct Marking codes on parts with a curved surface. Figure 38 - LT-511 Dome Lig hting System The LT-630 Four Bar Lighting System is designed for Code verification application s according to ISO/IEC 15415 or ISO/IEC 154[...]

  • Página 49

    INSTALLATION 39 3 3 INSTALLATION 3.1 PACKAGE CONTENTS Verify that the Matrix 400™ reader and all the parts supplie d with the equipment are present and intact when opening the packaging; the list of parts inclu des:  Matrix 400™ reader  Quick Reference Guide  Test Charts (2)  Matrix family CD-ROM  Mounting Kit  Mounting Screws[...]

  • Página 50

    MATRIX 400™ REFERENCE MANUAL 40 3 3.2 MECHANICAL DIMENSIONS Matrix 400™ can be installed to operate in different positions. The twelve screw holes (M4 x 5) on the body of the reader are for mechanical fixture ( Figure 41). The diagra m below gives the overall dimensions of the reader and may be used for its installation. Refer to par. 3.3 for v[...]

  • Página 51

    INSTALLATION 41 3 4 [0.16] M4 [0.16] N°7 7 [0.28] 12.5 [0.49] 12.5 [0.49] 4.3 [0.17] 4.3 [0.17] 50 [1.97] 61 [2.40] = = 72.5 [2.85] 83.5 [3.29] = = 12.5 [0.49] 12.5 [0.49] 12.5 [0.49] 12.5 [0.49] 34 [1.34] 34 [1.34] 4.2 [0.17] Ø8 . 2 5 [ Ø0 . 3 2 ] 4. 2 [0.17] 41.5 [1.63] 26.5 [1.04] 40 [1.57] = = 3 [0.12] 50 [1.97] 70 [2.76] = = 4.2 [0.17] 8 . [...]

  • Página 52

    MATRIX 400™ REFERENCE MANUAL 42 3 3.3 MOUNTING AND POSITI ONING MATRIX 400™ Using the Matrix 400™ mounting brackets you can obtain rotation on the various axes of the reader as shown in the diagram below: Figure 43 –Positioning with Mounting Bracket (Back) Figure 44 –Positioning with Mounting Bracket (Side) Figure 45 –Positioning with M[...]

  • Página 53

    INSTALLATION 43 3 Matrix 400™ is able to decode code labels at a variety of angles, however significant angular distortion may degrade reading performance. When mounting Matrix 400™, take into consideration these ideal label position angles: Pitch or Skew 10° to 20° and Tilt 0° . Note: Since Matrix 400™ is omni-directional on the code plan[...]

  • Página 54

    MATRIX 400™ REFERENCE MANUAL 44 4 4 CBX ELECTRICAL CONNECTIONS All Matrix 400™ models can be connected to a CBX connection box through one of the available CAB-MSxx accessory cables. These accessory cables terminate in a 19-pin connector on the Matrix 400™ side and in a 25-pin male D-sub connector on the CBX side. We recommend making system c[...]

  • Página 55

    CBX ELECTRICAL CONNECTIONS 45 4 NOTE To avoid electromagnetic interference when th e reader is connected to a CBX connection box, verify the jum per positions in the CBX as indi cated in its Installation Manual. 4.1 POWER SUPPLY Power can be supplied to the reader through the CBX100/500 spring clamp terminal pins as shown in Figure 49: V+ in Earth [...]

  • Página 56

    MATRIX 400™ REFERENCE MANUAL 46 4 4.2.1 RS232 Interface The RS232 interface can be used for Point-to-Point, Pass Through or Master/Slave connections. When it is connected to the host computer it allows both transmission of code data and reader configuration by VisiSet™. The following pins are used for RS232 interface connection: CBX100/500 Func[...]

  • Página 57

    CBX ELECTRICAL CONNECTIONS 47 4 4.2.2 RS485 Full-Duplex Interface The RS485 full-duplex (5 wires + shield) interface is used for non-polled communication protocols in point-to-point connections over lon ger distances (max 1200 m / 3940 ft) than those acceptable for RS232 communications or in electrically noisy environments. The CBX pinout follows: [...]

  • Página 58

    MATRIX 400™ REFERENCE MANUAL 48 4 4.2.3 RS485 Half-Duplex Interface NOTE This interface is provided for backw ard compatibility. We recommend using the more efficient ID-NET™ network for Master/Slave or Multiplexer layouts. The RS485 half-duplex (3 wires + shield) interface is used for polled communication protocols. It can be used for Multidro[...]

  • Página 59

    CBX ELECTRICAL CONNECTIONS 49 4 Figure 55 - Matrix 400™ Multidrop Connection to a Multiplexer[...]

  • Página 60

    MATRIX 400™ REFERENCE MANUAL 50 4 4.3 ID-NET™ INTERFACE CBX100/500 Function Shield Network Cable Shield ID+ ID-NET™ network + ID- ID-NET™ network - REF Network Reference 4.3.1 ID-NET™ Cables The following instructions are referred to Figure 57, Figure 58 and Figure 59.  The general cable type specifications are: CAT5 twisted pa ir + ad[...]

  • Página 61

    CBX ELECTRICAL CONNECTIONS 51 4 4.3.2 ID-NET™ Response Time The following figure shows the response time of the ID-NET™ network. This time is defined as the period between the Trigger activation and the beginning of data transmission to the Host. Max ID-NET™ Response Time 240 220 200 180 160 140 120 100 80 60 40 20 0 Response Time (ms) Number[...]

  • Página 62

    MATRIX 400™ REFERENCE MANUAL 52 4 Figure 57 – ID-NET™ Netw ork Connections with isolated power blocks[...]

  • Página 63

    CBX ELECTRICAL CONNECTIONS 53 4 Figure 58 - ID-NET™ Netw ork Connections with Co mmon Power Branch Netwo rk[...]

  • Página 64

    MATRIX 400™ REFERENCE MANUAL 54 4 Figure 59 – ID-NET™ Netw ork Connections with Co mmon Power Star Network[...]

  • Página 65

    CBX ELECTRICAL CONNECTIONS 55 4 4.3.3 ID-NET™ Network Termination The network must be properly terminated in the first and last reader of the network. This is done by setting the ID-NET™ Termination Resistance Switch in the CBX100/500 to ON. 4.4 AUXILIARY RS232 INTERFACE The RS232 auxiliary interface is available for Point-to-Point, Pass Throug[...]

  • Página 66

    MATRIX 400™ REFERENCE MANUAL 56 4 4.5 INPUTS There are two optocoupled polarity insensitive inputs available on the reader: Input 1 (External Trigger) and Input 2, a generic input: The External Trigger can be used in One Shot Mode or in Phase Mode. Its main functions are:  acquisition trigger in One Shot Mode  reading phase-ON/reading phase[...]

  • Página 67

    CBX ELECTRICAL CONNECTIONS 57 4 EXTERNAL TRIGGER INPUT CONNECTIONS USING MATRIX 400™ POWER CAUTION Power is available directly to the Input Device, independently from the Power Supply Switch inside the CBX. (brown) (black) (blue) PH-1 Photocell (PNP) Figure 62 – PH-1 External Trigger Using MATRIX 400™ Power Power to Input Photocell Sig nal Ph[...]

  • Página 68

    MATRIX 400™ REFERENCE MANUAL 58 4 CBX100/500 Function +V Power Source - Inputs I2 A Input 2 A (p olarity insensit ive) I2 B Input 2 B (p olarity insensit ive) -V Power Reference - Inputs INPUT 2 CONNECTIONS USING MATRIX 40 0™ POWER CAUTION Power is available directly to the Input Device, independently from the Power Supply Switch inside the CBX[...]

  • Página 69

    CBX ELECTRICAL CONNECTIONS 59 4 Pulled up to Ex ternal Input Device Pow er Input Signal Input Device Figure 67 - NPN Input 2 Using Ex ternal Power 4.6 OUTPUTS Two optocoupled general purpose outputs are available. The meaning of the two outputs Output 1 and Output 2 can be defined by the user. They are t ypically used either to signal the data coll[...]

  • Página 70

    MATRIX 400™ REFERENCE MANUAL 60 4 OUTPUT CONNECTIONS USING MATRIX 40 0™ POWER CAUTION Power is available directly to the Output Device, independently from the Power Supply Switch inside the CBX. Power to Output Output device Signal Output device Reference Output Device Figure 68 - Open Emitter Output Using MATRIX 400™ Power Power to Output de[...]

  • Página 71

    CBX ELECTRICAL CONNECTIONS 61 4 4.7 EXTERNAL LIGHTING SYSTEMS If an External Illuminator is used, it can be powered from the CBX connection box. It must be connected to the Vdc and GND terminal clamps. CAUTION Power is available directly to the Illuminator, independently from the Power Supply Switch inside the CBX. In the case of the LT-100, LT-200[...]

  • Página 72

    MATRIX 400™ REFERENCE MANUAL 62 4 4.8 USER INTERFACE - HOST The following table contains the pinout for standard RS232 PC Host interface. For other user interface types please refer to their own manual. RS232 PC-side connections 1 5 9 6 9-pin male connector 13 25 14 1 25-pin male connect or Pin Name Pin Name 2 RX 3 RX 3 TX 2 TX 5 GND 7 GND 7 RTS [...]

  • Página 73

    19-PIN CONNECTOR ELEC TRICAL CONNECTIONS 63 5 5 MATRIX 400™ CONNECTOR ELECTRICAL CONNECTIONS 5.1 M16 19-PIN CONNECTOR The Matrix 400™ reader is equipped with an M16 19-pin male connector (Binder, 423 Series) for connection to the power supply, ser ial interfaces and input/output sign als. The details of the connector pins are indicated in the f[...]

  • Página 74

    MATRIX 400™ REFERENCE MANUAL 64 5 5.2 M12-D 4-PIN CONNECTOR (ETHERNET) In Matrix 400 xxx-x1x models, an M12 D-Co ded connector is provided for the on-board Ethernet connection. This interface is IEEE 802.3 10 BaseT and IEEE 802.3u 100 BaseTx compliant. See par. 5.7 for connection details. Figure 74 - M12 D-Coded Fe male Ethernet Network Connector[...]

  • Página 75

    19-PIN CONNECTOR ELEC TRICAL CONNECTIONS 65 5 5.4.1 RS232 Interface The RS232 interface can be used for Point-to-Point, Pass Through or Master/Slave connections. When it is connected to the host computer it allows both transmission of code data and reader configuration by VisiSet™. The following pins of the M16 19-pin connector are used for RS232[...]

  • Página 76

    MATRIX 400™ REFERENCE MANUAL 66 5 5.4.2 RS485 Full-Duplex Interface The RS485 full-duplex (5 wires + shield) interface is used for non-polled communication protocols in point-to-point connections over lon ger distances (max 1200 m / 3940 ft) than those acceptable for RS232 communications or in electrically noisy environments. The following pins o[...]

  • Página 77

    19-PIN CONNECTOR ELEC TRICAL CONNECTIONS 67 5 5.4.3 RS485 Half-Duplex Interface NOTE This interface is provided for backw ard compatibility. We recommend using the more efficient ID-NET™ network for Master/Slave or Multiplexer layouts. The RS485 half-duplex (3 wires + shield) inte rface is available for polled communication protocols. It can be u[...]

  • Página 78

    MATRIX 400™ REFERENCE MANUAL 68 5 The figure below shows a multidrop configuration with Matrix 400™ readers connected to a Multiplexer. CA UTI ON This is an example of multidrop wiring. Consult the multiplexer m anual for complete wiring instructions. Figure 81 - Matrix 400™ Multidr op Connection to a Mutiplexer[...]

  • Página 79

    19-PIN CONNECTOR ELEC TRICAL CONNECTIONS 69 5 5.5 ID-NET™ INTERFACE Pin Name Function R ID+ ID-NET™ network + P ID- ID-NET™ network - L GND Ground 5.5.1 ID-NET™ Cables The following instructions are referred to Figure 83, Figure 84 and Figure 85.  The general cable type specifications are: CAT5 twisted pa ir + additional CAT5 twisted pai[...]

  • Página 80

    MATRIX 400™ REFERENCE MANUAL 70 5 5.5.2 ID-NET™ Response Time The following figure shows the response time of the ID-NET™ network. This time is defined as the period between the Trigger activation and the beginning of data transmission to the Host. Max ID-NET™ Response Time 240 220 200 180 160 140 120 100 80 60 40 20 0 Response Time (ms) Nu[...]

  • Página 81

    19-PIN CONNECTOR ELEC TRICAL CONNECTIONS 71 5 Figure 83 – ID-NET™ Netw ork Connections with isolated power blocks[...]

  • Página 82

    MATRIX 400™ REFERENCE MANUAL 72 5 Figure 84 - ID-NET™ Netw ork Connections with Co mmon Power Branch Netwo rk[...]

  • Página 83

    19-PIN CONNECTOR ELEC TRICAL CONNECTIONS 73 5 Figure 85 – ID-NET™ Netw ork Connections with Co mmon Power Star Network[...]

  • Página 84

    MATRIX 400™ REFERENCE MANUAL 74 5 5.5.3 ID-NET™ Network Termination The network must be properly terminated by a 120 Ohm resistor at the first and last r eader of the network. 5.6 AUXILIARY RS232 INTERFACE The RS232 auxiliary interface is available for Point-to-Point, Pass Through or Master/Slave connections. When it is connected to the host co[...]

  • Página 85

    19-PIN CONNECTOR ELEC TRICAL CONNECTIONS 75 5 5.7 ETHERNET INTERFACE (MATRIX 400 XXX-010 MODELS ONLY) The Ethernet Interface can be used for TCP/IP communication with a remote or local host computer by connecting the reader to either a LAN or directly to a host PC. The following is an example of a connection to a LAN using a CAB-ETH-M0 x straight t[...]

  • Página 86

    MATRIX 400™ REFERENCE MANUAL 76 5 5.8 INPUTS There are two optocoupled polarity insensitive inputs availa ble on the M16 19-pin connector of the reader: Input 1 (External Trigger) and Input 2, a generic input: The External Trigger can be used in One Shot Mode or in Phase Mode. Its main functions are:  acquisition trigger in One Shot Mode  r[...]

  • Página 87

    19-PIN CONNECTOR ELEC TRICAL CONNECTIONS 77 5 EXTERNAL TRIGGER INPUT PNP PH-1 Vdc GND I1A I1B PNP PH-1 w ires Matrix 400™ B C L (brown) +10-30 Vdc (black) NO (blue) 0 V V CC ~ ~ + - A Figure 88 - External Trigger Us ing PNP PH-1 Photocell EXTERNAL TRIGGER INPUT CONNECTIONS USING MATRIX 400™ POWER EXTERNA L TRIG GER Matrix 400™ B C A L Ground [...]

  • Página 88

    MATRIX 400™ REFERENCE MANUAL 78 5 Matrix 400™ EXTERNAL TRIGGE R Vext 30 Vdc max. A B Signal V V CC ~ ~ + - I1A I1B Figure 92 - External Trigger NPN Using Exte rnal Power Pin Name Function A Vdc Power Supply input voltage + D I2A Input 2 A (polarity insensitive) E I2B Input 2 B (polarity insensitive) L GND Power Supply input voltage - INPUT 2 CO[...]

  • Página 89

    19-PIN CONNECTOR ELEC TRICAL CONNECTIONS 79 5 INPUT 2 CONNECTIONS USING EXTERNAL POWE R Matrix 400™ INPUT DEVICE Vext 30 Vdc max. D E V CC ~ ~ + - V Signal I2A I2B I in Figure 95 - Input PNP Using Ex ternal Power Matrix 400™ INPUT DEVICE Vext 30 Vdc max. D E Signal V V CC ~ ~ + - I2A I2B Figure 96 - Input NPN Using Ex ternal Power 5.9 OUTPUTS T[...]

  • Página 90

    MATRIX 400™ REFERENCE MANUAL 80 5 The output signals are fully programmable being determined by the configured Activation/Deactivation events, Deactivation Timeout or a combination of the two. Refer to the Digital I/O folder in the VisiSet™ Help On Line for further details. MATRIX USE R INTERFACE Vext 30 Vdc max H/G F/I I Load V Out Figure 97 -[...]

  • Página 91

    19-PIN CONNECTOR ELEC TRICAL CONNECTIONS 81 5 5.10 USER INTERFACE RS232 PC-side connections 1 5 9 6 9-pin male connector 13 25 14 1 25-pin male connect or Pin Name Pin Name 2 RX 3 RX 3 TX 2 TX 5 GND 7 GND 7 RTS 4 RTS 8 CTS 5 CTS How To Build A Simple Interface Test Cable: The following wiring diagram shows a simple test cable including power, exter[...]

  • Página 92

    MATRIX 400™ REFERENCE MANUAL 82 6 6 TYPICAL LAYOUTS The following typical layouts refer to system hardware configurations . However, they also require the correct setup of the software configuration parameters. Dotted lines in the figures refer to optional hardware configurations within the particular layout. 6.1 POINT-TO-POINT In this layout the[...]

  • Página 93

    TYPICAL LAYOUTS 83 6 In this layout a single reader functions as a Slave node on a Fieldbus network. The data is transmitted to the Host through an accessory Fieldbus interface board installed inside the CBX500 connection box. Reader configuration can be accomplished thro ugh the Auxiliary interface using the VisiSet™ configuration program or Hos[...]

  • Página 94

    MATRIX 400™ REFERENCE MANUAL 84 6 6.2 PASS-THROUGH Pass-through mode allows two or more devices to be connected to a single external serial interface. Each reader transmits the messages received by the Auxiliary interface onto the Main interface. All messages will be passed through this chain to the host. When One Shot or Phase Mode operating mod[...]

  • Página 95

    TYPICAL LAYOUTS 85 6 An alternative Pass-Through layout allows the more efficient ID-NET™ network to be used. This layout is really an ID-NET Master/Slave Mu ltidata layout which also allows each reader (Master and Slaves) to accept input on the Auxiliary interface, for example to connect a device such as a hand-held reader for manual code readin[...]

  • Página 96

    MATRIX 400™ REFERENCE MANUAL 86 6 6.3 ID-NET™ The ID-NET™ connection is used to collect data from several readers to build a multi-point or a multi-sided reading system; there can be one master and up to 31 slaves connected together. The slave readers are connected together usin g t he ID-NET™ interface. Every slave reader must have an ID-N[...]

  • Página 97

    TYPICAL LAYOUTS 87 6 For a Master/Slave Multidata layout each reader has its own reading phase independent from the others; each single message is sent from the master reader to the Host computer. Figure 105 – ID-NET™ M/S Multidata NOTE The auxiliary serial interface o f t he sl ave r e aders can be us ed i n L oca l Ech o communication mode to[...]

  • Página 98

    MATRIX 400™ REFERENCE MANUAL 88 6 Alternatively, the Master reader can communicate to the Host as a Slave node on a Fieldbus network. This requires using an a ccessory Fieldbus interface board installed inside the CBX500 connection box. System configuration can be accomplished through the Auxiliary interface of each i ndividual reader (internal C[...]

  • Página 99

    TYPICAL LAYOUTS 89 6 6.4 RS232 MASTER/SLAVE NOTE This interface is provided for backw ard compatibility. We recommend using the more efficient ID-NET™ network for Master/Slave or Multiplexer layouts. The RS232 master/slave connection is used to collect data f rom several readers to buil d either a multi-point or a multi-sided readin g system; the[...]

  • Página 100

    MATRIX 400™ REFERENCE MANUAL 90 6 6.5 MULTIPLEXER NOTE This interface is provided for backw ard compatibility. We recommend using the more efficient ID-NET™ network for Master/Slave or Multiplexer layouts. Each reader is connected to a Multiplexer (for example MX4000) with the RS485 half-duplex main interface through a CBX connection box. Befor[...]

  • Página 101

    TYPICAL LAYOUTS 91 6 6.6 ETHERNET CONNECTION (MATRI X 400 XXX-010 MODELS ON LY) For Matrix 400 XXX-010 models, the Ethernet connection is possible in two different layouts. In both layouts, before proceeding with the connection, it is necessary to configure the reader Ethernet parameters via VisiSet™. For further details, see the Ethernet Folde r[...]

  • Página 102

    MATRIX 400™ REFERENCE MANUAL 92 6 When using a Local Area Network (LAN), one or more Matrix 400 XXX-010s can be connected to the network by using CAB-ETH-M0x straight through cables: Figure 111 - Ethernet Netw ork Layout CBX Matrix 400™ HOST NETWORK Powe r CAB-ETH-M0x CAB-MSxx 1 2 3  Ethernet Interfac e (Straight Through Cables)  Auxiliar[...]

  • Página 103

    READING FEATURES 93 7 7 READING FEATURES 7.1 OPTICAL ACCE SS ORY SELECTION Referring to Figure 112 and the formula below, use the data in the following table to calculat e the FOV for your application. Model Lens Viewing Angle Horizontal Viewing Angle Vertical Viewing Angle Diagonal Min Focus Distance mm LNS-1109 9 mm 48.5° 39.5° 60° 85 LNS-1112[...]

  • Página 104

    MATRIX 400™ REFERENCE MANUAL 94 7 Example: The FOV for a Matrix 400 600-0x0 base using the 16 mm lens at a focus distance of 200 mm is: FOV H = 2 [(200 mm + 35 mm) tan (24°/2)] = 100 mm FOV V = 2 [(200 mm + 35 mm) tan (18°/2)] = 74 mm 7.2 HORIZONTAL FOV VS. READI NG DISTANCE DIAGRAMS The following graphs represent the Horizontal Field of View ([...]

  • Página 105

    READING FEATURES 95 7 7.2.2 1D (Linear) Codes 1D Codes – Matrix 400 400-0x0 (SXGA) 9 mm, 12.5 mm, 16 mm 0 5 10 15 20 25 30 35 40 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 Reading Distance (cm) Horizontal FOV (cm) SXGA - 9 mm SXGA - 12.5 mm SXGA - 16 mm 0.25 0.20 0.33 0.38 0.20 0.25 0.50 0.30 0.33 0.38 0.38 0.50 0.50 0.33 0.30 0.30 0.25 0.20 0.15[...]

  • Página 106

    MATRIX 400™ REFERENCE MANUAL 96 7 9 mm, 12.5 mm, 16 mm 0 5 10 15 20 25 30 35 40 45 50 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 Reading Distance (cm) Horizontal FOV (cm) UXGA - 9 mm UXGA - 12.5 mm UXGA - 16 mm 0.15 0.25 0.20 0.20 0.25 0.30 0.33 0.38 0.15 0.12 0.20 0.25 0.50 0.30 0.33 0.38 0.38 0.50 0.50 0.33 0.30 0.10 [...]

  • Página 107

    READING FEATURES 97 7 7.2.3 2D (Bi-dimensional) Codes 2D Codes – Matrix 400 400-0x0 (SXGA) 9 mm, 12.5 mm, 16 mm 0 5 10 15 20 0 5 10 15 20 25 30 35 Reading Distance (cm) Horizontal FOV (cm) SXGA - 9 mm SXGA - 12.5 mm SXGA - 16 mm 0.25 0.20 0.33 0.38 0.20 0.25 0.50 0.30 0.33 0.38 0.38 0.50 0.50 0.33 0.30 2D Codes – Matrix 400 400-0x0 (SXGA) 25 mm[...]

  • Página 108

    MATRIX 400™ REFERENCE MANUAL 98 7 2D Codes – Matrix 400 600-0x0 (UXGA) 9 mm, 12.5 mm, 16 mm 0 5 10 15 20 25 0 5 10 15 20 25 30 35 40 45 50 55 Reading Distance (cm) Horizontal FOV (cm) UXGA - 9 mm UXGA - 12.5 mm UXGA - 16 mm 0.15 0.25 0.20 0.20 0.25 0.30 0.33 0.38 0.15 0.12 0.20 0.25 0.50 0.30 0.33 0.38 0.38 0.50 0.50 0.33 0.30 2D Codes – Matr[...]

  • Página 109

    READING FEATURES 99 7 7.3 MAXIMUM LINE SPEED AND EXPO SURE TIME CALCULATIONS The Exposure Time (or Shutter ) parameter defines the time during which the image will b e exposed to the reader sensor to be acquired. This parameter depends heavily on the environmental conditions (external lighting system, image contrast etc.). In general, a longer time[...]

  • Página 110

    MATRIX 400™ REFERENCE MANUAL 100 7 T exp (max) and LS (max) are represented in the graph below as the curved line for X (code resolution). Values above the curve result in blurring. In practice, the application values are somewhere below the theoretical line, (in the green area), due to environmental a nd other conditions. Line Speed T exp SW Lim[...]

  • Página 111

    READING FEATURES 101 7 Line Speed T exp SW Limit X 2X Convey or Spee d Limit Readable Blurring T exp (min) SW/HW Limit T exp (min) is the minimum Exposure Time value obtainable f or the specific application. It can be evaluated in static reading conditions and depends on the Matrix reader model selected for the application (internal lighting system[...]

  • Página 112

    MATRIX 400™ REFERENCE MANUAL 102 8 8 SOFTWARE CONFIGURATION Software configuration of your Matrix 400™ for static reading or simple code reading applications can be accomplished by the Rapid Configuration procedure using the X- PRESS™ HMI (which requires no external confi guration program) or by using the VisiSet™ Setup Wizard for easy setu[...]

  • Página 113

    SOFTWARE CONFIGURA TION 103 8 8.3 STARTUP After completing the mechanical and electrical connections to Matrix 400™, you can begin software configuration as follows: 1. Power on the Matrix 400™ reader. Wait for the reader startup. The system bootstrap requires a few seconds to be completed. The reader automatically enters Run Mode. 2. Run the V[...]

  • Página 114

    MATRIX 400™ REFERENCE MANUAL 104 8 8.3.1 VisiSet™ Options The Options item from the VisiSet™ menu (see Figure 113) presents a window allowing you to configure:  the logging function ( Log )  VisiSet™ window properties ( Environment )  VisiSet™ communication channel ( Communication ) Figure 114 - Option s - Log Figure 115 - Option[...]

  • Página 115

    SOFTWARE CONFIGURA TION 105 8 Figure 116 - Options – Commu nication: Serial Port Figure 117 - Options – Commu nication: Ethernet[...]

  • Página 116

    MATRIX 400™ REFERENCE MANUAL 106 8 8.4 CONFIGURATION Once connected to Matrix 400™ as described in par. 8.3, you can modif y the configuration parameters as follows: 1. Press the C alibration Tool button f rom the Main Menu. Matrix 400™ will download its permanent memory configuration parameters with the default values (if it is the first tim[...]

  • Página 117

    SOFTWARE CONFIGURA TION 107 8 8.4.1 Edit Reader Parameters The Parameter Setup window displays the configuration parameters grouped in a series of folders. Each parameter can be modified by selecting a different item from the prescribed list in the box , or by typing new values directly into the parameter box . By right clicking the mouse when posi[...]

  • Página 118

    MATRIX 400™ REFERENCE MANUAL 108 8 Parameters to verify/modify:  Operating Mode Sets the parameters which customize the rea der operating mode starting from three main modes: One Shot: acquires a si ngle image based on the selected value for the Acquisition Trigger and Acqui sition Trigger Delay. Continuous: continuously acq uires images with [...]

  • Página 119

    SOFTWARE CONFIGURA TION 109 8 When all the configuration parameters are set correctly, save them to the Matrix 400™ reader by pressing the Send button. See Figure 118. For successive configur ation of other readers or for backup/archive copies, it is possible to save the configuration onto your PC by selecting the Save Configuration File option f[...]

  • Página 120

    MATRIX 400™ REFERENCE MANUAL 110 8 Environmental Parameters regard the device Identity and Position in a Network (ID-NET™, Master/Slave RS232, MUX 32, Ethernet) and are not influenced by the "Send Default Configuration" and "Send Configuration" commands. This allows individual devices to be configured differently without aff[...]

  • Página 121

    SOFTWARE CONFIGURA TION 111 8 For device replacement it is necessary to se nd the previously saved configuration (both Configuration and Environmental parameters) to the new device. To do this select "Send Configuration with Options" from the Device Menu and check the Environmental Parameters checkbox: In order to return a device to its a[...]

  • Página 122

    MATRIX 400™ REFERENCE MANUAL 112 8 8.4.3 Calibration VisiSet™ provides a Calibration Tool to maximize the reading performance by tuning the acquisition parameters and the time of the delayed triggers. By selecting the Calibration Tool from the VisiSet™ Main Menu ( F ), the following window appears together with the Parameter Setup window: Fig[...]

  • Página 123

    SOFTWARE CONFIGURA TION 113 8 The following examples show some of the typical conditions occurring during the inst allation: Under-exposure: To correct this result it is recommended to change the following parameters in their order of appearance: 1. increase the Exposure Time 2. increase the Gain NOTE In general, a longer exposure time corresponds [...]

  • Página 124

    MATRIX 400™ REFERENCE MANUAL 114 8 Over-exposure: To correct this result it is recommended to change the following parameters in their order of appearance: 1. decrease the Gain 2. decrease the Exposure Time Figure 121 - Example O ver Exposure: Too Light[...]

  • Página 125

    SOFTWARE CONFIGURA TION 115 8 Moving code out of the Field of View: To correct this result and have the code completely visible in F.O.V., it is possible to follow one or both the procedures listed below:  reposition the reader  use the Acquisition Trigger Delay by tuning the Delay Time (x100µs) Figure 122 - Example ou t of FOV[...]

  • Página 126

    MATRIX 400™ REFERENCE MANUAL 116 8 8.4.4 Multi Image Acquisition Settings When controlled variable conditions occur in the application, Multiple Image Acquisition Settings (up to 10), can be defined to create a database of parameter groups tha t handle each specific application condition. This databa se of pre-defined settings functions cyclicall[...]

  • Página 127

    SOFTWARE CONFIGURA TION 117 8 8.4.6 Region Of Interest Windowing In order to satisfy very high throughput applications, higher frame rates can be achieved using the powerful Region Of Interest Windowing parameters in the Calibration parameter setup menu. Region Of Interest Windowing allows defining a region or window within the reader FOV. The Top,[...]

  • Página 128

    MATRIX 400™ REFERENCE MANUAL 118 8 8.4.7 Direct Part Marking Applications Decoding Method: Direct Marking For DataMatrix and QR code the Decoding Method parameter selects the decoding algorithm according to the printing/marking technique used to create the symbol and on the overall printing/marking quality. The Direct Marking selection improves t[...]

  • Página 129

    SOFTWARE CONFIGURA TION 119 8 Image Filter Sets the filter to be applied to the image before being processed. This parameter can be used to successfully decode particular ink-spread printed codes (ex. direct part mark codes). A different filter can be applied to each Image Acquisition Setting . The Erode Filter enlarges the image dark zones to incr[...]

  • Página 130

    MATRIX 400™ REFERENCE MANUAL 120 8 8.5 IMAGE CAPTURE AND DECODING By using the Capture Image and Decode La st Image functions from the VisiSet™ Main menu, you can get info rmation about the image decod able codes in terms of Symbology, encoded Data, Position and Orientati on, Decode Time and Code Quality Assessmen t Metrics. Figure 123 - Captu [...]

  • Página 131

    MAINTENANCE 121 9 9 MAINTENANCE 9.1 CLEANING Clean the reading window (see Figure A, 1) periodically for continued correct operation of the reader. Dust, dirt, et c. on the window may alter the reading performance. Repeat the operation frequently in particularly dirty environments. Use soft material and alcohol to clean the window and avoid any abr[...]

  • Página 132

    MATRIX 400™ REFERENCE MANUAL 122 10 10 TROUBLESHOOTING 10.1 GENERAL GUIDELINES  When wiring the device, pay careful attention to the signal name (acronym) on the CBX100/500 spring clamp connectors (chp. 4). If you are connecting directly to the Matrix 400 ™ M16 19 -pi n c onn ect or pay attention to the pin number of the signals ( chp. 5). ?[...]

  • Página 133

    TROUBLESHOOTING 123 10 TROUBLESHOOTING GUIDE Problem Suggestion One Shot or Phase Mode using serial trigger source: the ”TRIGGER” LED is not blinking.  In the Operating Mode folder check the settings for Reading Phase-ON, Acquisition Trigger and Reading Phase-OFF parameters.  Are the COM port parameters ( Baud Rate, Parity, Data Bits, Sto[...]

  • Página 134

    MATRIX 400™ REFERENCE MANUAL 124 10 TROUBLESHOOTING GUIDE Problem Suggestion are incorrect, corrupted or incomplete.  In VisiSet  Communication folder check the settings of Header and Terminator String parameters.  In VisiSet™ Data Collection folder, check the settings of DATA FORMAT parameter group. How do I obtain my reader Serial Nu[...]

  • Página 135

    TECHNICAL FEATURES 125 11 11 TECHNICAL FEATURES ELECTRICAL FEATURES Power Supply Voltage 10 to 30 Vdc Power Consumption 0.8 to 0.27 A, 8 W max.; 0.5 to 0.17 A, 5 W typical Communication Interfaces Main - RS232 - RS485 full-duplex - RS485 half-duplex 2400 to 115200 bit/s 2400 to 115200 bit/s 2400 to 115200 bit/s Auxiliary - RS232 2400 to 115200 bit/[...]

  • Página 136

    MATRIX 400™ REFERENCE MANUAL 126 11 SOFTWARE FEATURES Readable Code Symbologi es 1-D and stacked 2-D POST AL  PDF417 Standard and Micro PDF417  Code 128 (EAN 128)  Data Matrix ECC 200 (Standard and Direct Marking)  Australia Post  Royal Mail 4 State Customer  Code 39 (Standard and Full ASCII)  Interleaved 2 of 5  QR Code ([...]

  • Página 137

    127 GLOSSARY AIM (Association for Automatic Identification and Mobility): AIM Global is the international trade association representing automatic identificat ion and mobility technology solution providers. AIM DPM Quality Guideline Standard applicable to the symbol quality assessment of direct part marking (DPM) performed in using two-dimensional [...]

  • Página 138

    128 Depth of Field The difference between the minimum and the maximum distance of the object in t he field of view that appears to be in focus. Diffused Illumination Distributed soft lighting from a wide variety of angles used to eliminate shadows a nd direct reflection effects from highly reflective surfaces. Direct Part Mark (DPM) A symbol marked[...]

  • Página 139

    129 ISO (International Organization for Standardization): A network of the national standards institutes of several countries produ cing world-wide industrial and commercial standards. LED (Light Emitting Diode) A low power electronic light source commonly used as an indicator light. It uses less power than an incandescent light bulb but more than [...]

  • Página 140

    130 INDEX A Accessories, 31 Application Examples, 32 Auxiliary RS232 Interface, 55, 74 C Calibration, 112 CBX Electrical Connections, 44 Compliance, vii E Edit Reader Parameters, 107 Electrical Connections, 63 Ethernet Connection, 91 Ethernet Interface, 75 External Lighting Systems, 35 G General View, x Glossary, 127 H Handling, viii I ID-NET™, 8[...]

  • Página 141

    DECLARATION OF CONFORMITY 08 Datalogic Automation S.r.l. Via S. Vitalino 13 40012 - Lippo di Calderara Bologna - Italy dichiara che declares that the déclare que le bescheinigt, daß das Gerät declare que el Matrix 4XX YYY-ZZZ e tutti i suoi modelli and all its models et tous ses modèles und seine Modelle y todos sus modelos sono conformi alle D[...]

  • Página 142

    www .automation.datalogic.com[...]