Cisco Systems SCE 2000 4/8xFE manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131

Ir a la página of

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Cisco Systems SCE 2000 4/8xFE. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Cisco Systems SCE 2000 4/8xFE o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Cisco Systems SCE 2000 4/8xFE se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Cisco Systems SCE 2000 4/8xFE, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones Cisco Systems SCE 2000 4/8xFE debe contener:
- información acerca de las especificaciones técnicas del dispositivo Cisco Systems SCE 2000 4/8xFE
- nombre de fabricante y año de fabricación del dispositivo Cisco Systems SCE 2000 4/8xFE
- condiciones de uso, configuración y mantenimiento del dispositivo Cisco Systems SCE 2000 4/8xFE
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Cisco Systems SCE 2000 4/8xFE no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Cisco Systems SCE 2000 4/8xFE y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Cisco Systems en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Cisco Systems SCE 2000 4/8xFE, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Cisco Systems SCE 2000 4/8xFE, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Cisco Systems SCE 2000 4/8xFE. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

    Corporate Headquarters Cisco S ystem s, In c. 170 West Tasman Driv e San Jose, CA 9 5134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS ( 6387) Fax: 408 526-4100 Customer Order Number: DOC-782605= Text Part Number: OL -7826-05 Cisco SCE 2000 4/8xFE Inst allation and Configuration Guide Version 3.0.5 OL-7826-05[...]

  • Página 2

    THE SPECIFICATIONS AND INFORMATION REGARDING THE PRO DUCTS IN THIS MANUAL ARE SUBJ ECT TO CHANGE WI THOUT NOTICE. ALL S TATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELI EVED TO BE ACCURATE BUT ARE P RESENTED WITHOUT WARRANTY OF ANY KIN D, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONS IBILITY FOR THEIR APPLICATION OF ANY PRODUC[...]

  • Página 3

    Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 i Preface v Document Revision History v Audience vi Organization vi Related Publications vii Conventions viii Obtaining Documentation ix World Wide Web ix Documentation CD-ROM ix Ordering Documentation ix Documentation Feedback x Obtaining Technical Assistance x Cisco.com x Techn[...]

  • Página 4

    Content s Cisco SCE 2000 4/8xFE Installation and Configuration Guide ii OL-7826-05 Back Panel 2-4 Checking the Shipping Container Contents 2-5 SCE 2000 Installation Checklist 2-6 Topology 3-1 The SCE 2000 Platform 3-1 Topology Considerations 3-1 Functionality 3-2 Number of links 3-2 Redundancy 3-2 Link Continuity 3-3 Physical Topologies 3-4 Single [...]

  • Página 5

    Contents Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 iii Replacing the Battery 4-22 Connecting the Management Interfaces and Performing Initial System Configuration 5-1 Connecting the Local Console 5-1 Setting Up the Local Console 5-2 Initial System Configuration 5-3 Setup Command Parameters 5-3 Step 1: Configuring Initial[...]

  • Página 6

    Content s Cisco SCE 2000 4/8xFE Installation and Configuration Guide iv OL-7826-05 Managing SCE 2000 Configurations 7-4 Viewing Configuration 7-4 Saving the Configuration Settings 7-5 Recovering a Previous Configuration 7-6 Performing Complex Configurations 7-7 Displaying the SCE Platform Version Information 7-8 Displaying the SCE Platform Inventor[...]

  • Página 7

    Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 v This preface describes who should read the SCE 2000 4/8xFE Installation and Configurati on Guide , how it is or ganized, a nd its document conventions. Document Revision History Cisco Service Control Release Part Number Publication Date Release 3.0.5 OL-7824-05 November, 2 006 [...]

  • Página 8

    Preface Audience Cisco SCE 2000 4/8xFE Installation and Configuration Guide vi OL-7826-05 Audience This guide is for the networking or computer tec hnician responsible for installing and confi guring the SCE 2000 platform on-site. T o use this publi cation, you should be familiar with telecommunications equipment and installation pr ocedures, as we[...]

  • Página 9

    Preface Related Publications Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 vii Chapter 8 Troubleshooti ng (on page 8-1 ) This chapte r provides basic system startup tr oubleshoot ing information. Related Publications Y our SCE 2000 platform and the software running on it contain extensive features and functionality , which a[...]

  • Página 10

    Preface Conventions Cisco SCE 2000 4/8xFE Installation and Configuration Guide viii OL-7826-05 Conventions This document uses the following conventions: Convention Descripti on boldface font Commands an d keywor ds are in boldface . italic font Arguments for whic h you sup ply values are in italics . [ ] Elements in square brackets are optional. {x[...]

  • Página 11

    Preface Obtaining Documentation Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 ix Obtaining Documentation The following sections provide sources for obtaining documentation from Cisco Systems. World W ide W eb Y ou can access the most current Cisco documentation on the W orld W ide W eb at the following sites: • http://www [...]

  • Página 12

    Preface Obtaining T echnical Assistance Cisco SCE 2000 4/8xFE Installation and Configuration Guide x OL-7826-05 Documentation Feedback If you are reading Cisco product documentation on the W o rld W ide W eb, you can submit technical comments electronically . Click Feedback in the toolbar and select Documentation . After you complete the form, clic[...]

  • Página 13

    Preface Obtaining T echnical Assistance Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 xi Cont acting T AC by Using the Cisco T AC Website If you have a priority level 3 (P3) or priority level 4 (P 4) problem, contact T AC by going to the T AC website http://www .cisco.com/tac . P3 and P4 level problems are defined as follows[...]

  • Página 14

    [...]

  • Página 15

    Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 1-1 This chapter provides a general overview of the Ci sco Service Control solution. It introduces the Cisco Service Control concept and the Service C ontrol capabilities. It also briefly describes the hardware capabilities of the Service Control En gine (SCE) platform and the Ci[...]

  • Página 16

    Chapter 1 General Overview Cisco Service Control Capabilities Cisco SCE 2000 4/8xFE Installation and Configuration Guide 1-2 OL-7826-05 Service Control for Broadband Service Providers Service providers of any access technology (DSL, cab le, mobile, and so on) tar geting residential and business consumers must find new ways to get maximum leverage f[...]

  • Página 17

    Chapter 1 General Overview The SCE Platform Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 1-3 Programmability allows new services to be de ployed quickly and provides an easy upgrade path for network, application, or service growth. • Robust and flexible back-off ice integration—The ability to integrate with existing thi[...]

  • Página 18

    Chapter 1 General Overview Management and Collection Cisco SCE 2000 4/8xFE Installation and Configuration Guide 1-4 OL-7826-05 The following diagram illustrates a common deploy ment of an SCE platform in a network. Figure 1-1: SCE Platfor m in the Network Management and Collection The Cisco Service Control solution includes a comp lete management i[...]

  • Página 19

    Chapter 1 General Overview Management and Collection Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 1-5 Network Management Cisco provides complete network FCAPS (Fault, Configuration, Accounting, Performance, Security) Management. T wo interfaces are provided for network management: • Command-line interface (CLI)—Accessi [...]

  • Página 20

    Chapter 1 General Overview Management and Collection Cisco SCE 2000 4/8xFE Installation and Configuration Guide 1-6 OL-7826-05 Data Collection The Cisco Service Control solution generates usag e data and statistics from the SCE platform and forwards them as Raw Data Records (RDRs), using a simple TCP-based protocol (RDR- Protocol). Th e Cisco Servi[...]

  • Página 21

    Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 2-1 This chapter provides an introduction to the SCE 2000 4/8xFE Pl atform, the Service Control hardware component. This chapter contains the following sections: • The SCE Platform 2-1 • Front Panel 2-1 • Back Panel 2-4 • Checking the Shipping Container Contents 2-5 • S[...]

  • Página 22

    Chapter 2 Introduction to the SCE Platform Front Panel Cisco SCE 2000 4/8xFE Installation and Configuration Guide 2-2 OL-7826-05 Figure 2-1: SCE Platfor m Front Panel T able 2-2 SCE 2000 Po r ts Port Quantity Description Connect This Port To… Mng1/ Mng2 2 10/100/1 000 Ether net RJ-45 ports for manageme nt of the SCE 2000 . CLI designation: interf[...]

  • Página 23

    Chapter 2 Introduction to the SCE Platform Front Panel Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 2-3 T able 2-3 SCE 2000 LED Groups LED Groups Description Power A • Continu ous green — Power s upply A is funct ioning n ormally • Red — Powe r supply A present, but ma lfunctioni ng • Unlit — Power supply A is e[...]

  • Página 24

    Chapter 2 Introduction to the SCE Platform Back Panel Cisco SCE 2000 4/8xFE Installation and Configuration Guide 2-4 OL-7826-05 LED Groups Description Mng The Mng port LEDs indicate the operational status of the SCE 2000 out-of-band LAN-based m anagement port , as follows: • Link/Active Green — indicates that the port link is up Unlit — indic[...]

  • Página 25

    Chapter 2 Introduction to the SCE Platform Checking the Shipping Container Contents Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 2-5 Checking the Shipping Container Contents Use the SCE 2000 Component List to check the contents of the SCE 2000 platform shipping container . Do not discard the shipping container . Y ou need t[...]

  • Página 26

    Chapter 2 Introduction to the SCE Platform SCE 2000 Installation Checklist Cisco SCE 2000 4/8xFE Installation and Configuration Guide 2-6 OL-7826-05 SCE 2000 Installation Checklist T o assist y ou with your installation and to provide a historical record of what was done by whom, photocopy the following SCE 2000 Installation Checklist. Indicate whe[...]

  • Página 27

    Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 3-1 This chapter describes the possible deployment topologies of the SCE 2000 . The Cisco SCE solution offer s a number of basic topolog y options that permit the user to tailor the SCE Platform to fit the needs of a particular installation. An understanding of the various issues[...]

  • Página 28

    Chapter 3 T opology T opology Consider ations Cisco SCE 2000 4/8xFE Installation and Configuration Guide 3-2 OL-7826-05 • Number of links — The SCE 2000 m ay be connected to one or two FE links. This is relevant for both Inline and Receive-Only topologies. • Redundancy — Must the system be designed to guarantee uninterrupted SCE 2000 functi[...]

  • Página 29

    Chapter 3 T opology T opology Consider ations Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 3-3 Link Continuity The bypass mechanism of the SCE 2000 allows traffic to continue to flow , if desired, even if the device itself is not functioning. Note that when the SCE 2000 is connected to the network throug h an external switc[...]

  • Página 30

    Chapter 3 T opology Physical T opologies Cisco SCE 2000 4/8xFE Installation and Configuration Guide 3-4 OL-7826-05 Physical T opologies Following are descriptions of a number of physical topologies that the SCE 2000 supports. Single SCE 2000 T opologies A single SCE 2000 supports both single FE link and dual FE link t opologies. Single Link: Inline[...]

  • Página 31

    Chapter 3 T opology Physical T opologies Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 3-5 Single Link: Receive-only T opology In this topology , an external switch resides phy sically on the FE link between the subscribers and the network. The traf fic passes through the exte rnal switch, which splits traffic to the SCE 200[...]

  • Página 32

    Chapter 3 T opology Physical T opologies Cisco SCE 2000 4/8xFE Installation and Configuration Guide 3-6 OL-7826-05 Dual link: Inline Inst allation In this topology , one SCE 2000 is connected inline in two full dupl ex, FE links. In case the two links are load-shared, asymmetrical routing might occur , and some of the flows may be split, i.e. the u[...]

  • Página 33

    Chapter 3 T opology Physical T opologies Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 3-7 Dual Link: Receive-Only T opology In this topology , one SCE 2000 is connected in receive-only mode to two full duplex, FE links using external switchs. If the two links are load -shared, asymmetrical routing might occur , and some of [...]

  • Página 34

    Chapter 3 T opology Physical T opologies Cisco SCE 2000 4/8xFE Installation and Configuration Guide 3-8 OL-7826-05 T wo Cascaded SCE 2000s: Inline T opology This topology allows both control and monitori ng functionality where re dundancy is required and “inline” connection is used. The two SC E 2000 s are cascaded, so the primary SCE 2000 proc[...]

  • Página 35

    Chapter 3 T opology Physical T opologies Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 3-9 SCE 2000 Configuration There are four topology-related parameters: • Connection mode — Can be any one of the following, depending on the physical installation of the SCE 2000 (Refer to Connection Mode Parameter (on page 3-9 )): •[...]

  • Página 36

    Chapter 3 T opology Physical T opologies Cisco SCE 2000 4/8xFE Installation and Configuration Guide 3-10 OL-7826-0 5 Physically Connected Links Parameter If the system consists of more than one device, this parameter defines which link is connected to this SCE 2000 . Currently the system supports a maximum of two links, which are designated link 0 [...]

  • Página 37

    Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 4-1 This chapter explains how to install a SCE 2000 platform in a rack or in a general tabletop or workbench installation. Additionally , this chapter contains instructions for install ing or replacing the power supply units and fan modules. Warning Before you install, operate, o[...]

  • Página 38

    Chapter 4 Installation and Maintenance Preparing to Install the SCE 2000 Platform Cisco SCE 2000 4/8xFE Installation and Configuration Guide 4-2 OL-7826-05 Figure 4-1: SCE Platfor m Dimensions T able 4-1 SCE 2000 Dimensio ns Dimension Measurement Height 3.47 inches (9.5 cm) Width 17.4 inches (4.43 cm ) Depth 18 inches (4.6 cm ) Weight 33 lb (15 kg)[...]

  • Página 39

    Chapter 4 Installation and Maintenance Preparing to Install the SCE 2000 Platform Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 4-3 Site Requirement Guidelines The environmental monitoring functionality in the SCE 2000 protects the system and components from potential damage from over -voltage and ove r-tem perature conditio[...]

  • Página 40

    Chapter 4 Installation and Maintenance Installing the SCE 2000 Platform Cisco SCE 2000 4/8xFE Installation and Configuration Guide 4-4 OL-7826-05 *Short term is defined as not more than 96 consecu tive hours, not more than 15 days in one year . 360 hours total in any given year , but no more than 15 occurrences in a one-year period. T able 4-3 SCE [...]

  • Página 41

    Chapter 4 Installation and Maintenance Installing the SCE 2000 Platform Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 4-5 Installation Precautions The router should already be in the area where you will install it, and your installation location should already be determined. If not, see Site Requir ement Guidelines (on page [...]

  • Página 42

    Chapter 4 Installation and Maintenance Installing the SCE 2000 Platform Cisco SCE 2000 4/8xFE Installation and Configuration Guide 4-6 OL-7826-05 Step 4 Attach the rubber feet by removing the adhesive strips and af fix the rubber feet onto the marked locations (on the bottom panel). Step 5 Replace the SCE 2000 platform firmly on the tabletop or wor[...]

  • Página 43

    Chapter 4 Installation and Maintenance Installing the SCE 2000 Platform Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 4-7 Att aching the Bracket s to the SCE 2000 Before installing the SCE 2000 in the rack, you must first install an appropriate rack-m ount bracket on each side of the front of the SCE 2000 , as illustrated in[...]

  • Página 44

    Chapter 4 Installation and Maintenance Installing the SCE 2000 Platform Cisco SCE 2000 4/8xFE Installation and Configuration Guide 4-8 OL-7826-05 Att aching the Crossrail Support s to the Rack When mounting in a rack with four posts (front and back) the two crossrail supports are m ounted one on each side of the rack. The SCE 2000 t hen slides into[...]

  • Página 45

    Chapter 4 Installation and Maintenance Installing the SCE 2000 Platform Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 4-9 Mounting the System to the Rack When the appropriate mounting brackets are securely installed, the SCE 2000 can be installed into the rack. T o mount the SCE 2000 to the rack after the brackets are in sta[...]

  • Página 46

    Chapter 4 Installation and Maintenance Installing the SCE 2000 Platform Cisco SCE 2000 4/8xFE Installation and Configuration Guide 4-10 OL-7826-0 5 Note Since the brackets suppo rt the weight of the en tire SCE 2000 chassis, be sure to use all four scre ws to fasten the two rack-mount brackets to t he rack posts . Attaching a Chassis Ground Connect[...]

  • Página 47

    Chapter 4 Installation and Maintenance Power Supply Overview Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 4-11 Figure 4-11: Gr ounding t he Unit (DC) This completes the procedure for installing the SCE 2000 chassis. Proceed to the next section, Connecting to the Power Supply , to continue the installation. Power Supply Over[...]

  • Página 48

    Chapter 4 Installation and Maintenance Power Supply Overview Cisco SCE 2000 4/8xFE Installation and Configuration Guide 4-12 OL-7826-0 5 The handle of the AC unit is at the bottom of the unit. Figure 4-12: AC Po wer Module The handle of the DC unit is at the top of the unit. Figure 4-13: DC Pow er Module LEDs The following LEDs are used to monitor [...]

  • Página 49

    Chapter 4 Installation and Maintenance Power Supply Overview Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 4-13 Refer to the following tables for LED status information T able 4-4 IN LED Status f or A C -input and DC-input P o wer Supply Units LED State Power Supply Unit Condition On (green) Th e input voltage is in the requ[...]

  • Página 50

    Chapter 4 Installation and Maintenance Removing and Replaci ng a Power Supply Unit Cisco SCE 2000 4/8xFE Installation and Configuration Guide 4-14 OL-7826-0 5 Power Supply Specifications The following table lists the AC-input and DC-input power supply specifications for the SC E 2000 platform: T able 4-7 SCE 2000 Po wer Supply Speci fications AC-in[...]

  • Página 51

    Chapter 4 Installation and Maintenance Removing and Replaci ng a Power Supply Unit Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 4-15 Warning Never install an AC power module and a DC power module in the same chassis. Powering Down the Power Supply Unit and Disconnecting Input Power The following sections describe how to rem[...]

  • Página 52

    Chapter 4 Installation and Maintenance Removing and Replaci ng a Power Supply Unit Cisco SCE 2000 4/8xFE Installation and Configuration Guide 4-16 OL-7826-0 5 Powering Down a DC-Input Power Supply Unit and Removing the DC-Input Leads T o power down a DC-input power supply to the SCE 2000 platform, complete the following steps: Warning Before comple[...]

  • Página 53

    Chapter 4 Installation and Maintenance Removing and Replaci ng a Power Supply Unit Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 4-17 Replacing the Power Supply Unit Warning Do not mix AC-input and DC-input p ower supply units i n the same SCE 2000 platform . T o install a new power supply into a SCE 2000 platform, complete [...]

  • Página 54

    Chapter 4 Installation and Maintenance Removing and Replaci ng a Power Supply Unit Cisco SCE 2000 4/8xFE Installation and Configuration Guide 4-18 OL-7826-0 5 Reconnecting AC-Input Power Supply Unit The following procedures explain how to reconnect an AC-input power to the SCE 2000 platform. If you are reconnecting DC-input power , proceed to Recon[...]

  • Página 55

    Chapter 4 Installation and Maintenance Removing and Replaci ng a Power Supply Unit Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 4-19 Warning W i ring should be done b y a professional in accordance with state and local electrical codes. T o reconnect the DC-input power to the SCE 2000 platform, complete the following steps:[...]

  • Página 56

    Chapter 4 Installation and Maintenance Fan Module Overview Cisco SCE 2000 4/8xFE Installation and Configuration Guide 4-20 OL-7826-0 5 Step 8 Ensure that the power supply is properly ali gned and t he installation screw is tightened. This completes the steps for reconnec ting the DC-input power supply to the SCE 2000 platform . Fan Module Overview [...]

  • Página 57

    Chapter 4 Installation and Maintenance Fan Module Overview Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 4-21 T o remove the fan module, complete the following steps: Step 1 Using a 1/4-inch flat-blade screwdriver , loosen the two captive screws on the faceplate of the fan module. Step 2 Grasp the fan module handle and remov[...]

  • Página 58

    Chapter 4 Installation and Maintenance Replacing the Battery Cisco SCE 2000 4/8xFE Installation and Configuration Guide 4-22 OL-7826-0 5 Replacing the Battery The SCE 2000 has a lithium battery on its main circuit board. When the battery loses its charge, call Cisco T echnical Support to replace the battery . Warning Do not attempt to replace this [...]

  • Página 59

    Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 5-1 This chapter explains how to connect the SCE 2000 platform to a local console and perform the initial system configuration via the setup wizard that runs automatically . Additionally , this chapter contains instructi ons for cabling the Fast Ethernet Managem ent interface. No[...]

  • Página 60

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Connecting the Local Cons ole Cisco SCE 2000 4/8xFE Installation and Configuration Guide 5-2 OL-7826-05 Setting Up the Local Console This section provides instructions for setting up your local term inal at your workstation, to enable you to perform the init[...]

  • Página 61

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 5-3 Initial System Configuration Upon initial connection to the local terminal, as described above, the system configuration wizard automatically runs to guide[...]

  • Página 62

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide 5-4 OL-7826-05 Parameter Definition local time and date Current local time and date. Use the format: 00:00:00 1 January 2002 SNTP Confi guration broadcast client status S[...]

  • Página 63

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 5-5 Parameter Definition enterprise traps status Sets th e status of the enterprise traps. system administrator Nam e of the system administrator. Topology C o[...]

  • Página 64

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide 5-6 OL-7826-05 Each group of related parameters is prefaced by a question, asking whether you want to enter the menu. T o skip the menu, answer no (“n”) to the questi[...]

  • Página 65

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 5-7 Step 2: Configuring the Hostname The hostname is used to identify the SCE 2000 . It appears as part of the CLI prompt and is also returned as the value of [...]

  • Página 66

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide 5-8 OL-7826-05 Note The default passwor d for all l evels is “ cisc o ”. T o change the passwords, co mplete the following steps: Step 1 The default User password is [...]

  • Página 67

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 5-9 Y ou must enter the time setting menu in order to conf igure SNTP settings. Y ou may choose to skip the time settings menu if you wish to accept all defaul[...]

  • Página 68

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide 5-10 OL-7826-0 5 • T o accept the display ed default value, press Enter . • T o change the value, type the desi red number of seconds (64 through 1024 ) and press Ent[...]

  • Página 69

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 5-11 • T o disable DNS lookup, type n and press Enter . Enable IP DNS-based ho stname translat ion? [yes]: If you choose to disable DNS lookup, skip the rest[...]

  • Página 70

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide 5-12 OL-7826-0 5 Would you like to enter th e RDR-formatte r configura tion menu? [no]: y Type y and press Enter . The RDR-formatter destination dialog begins. Step 2 T y[...]

  • Página 71

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 5-13 Entry Format s Each ACL may permit/deny access to any IP address, one or more ranges of IP addresses, or one or more individual IP address. Three entry fo[...]

  • Página 72

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide 5-14 OL-7826-0 5 Would you like to enter th e Access lists configurat ion menu? [ no]: y Type y and press Enter . The Access Control Lists configuration dialog begi ns. S[...]

  • Página 73

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 5-15 • When all ACLs have been created, press Enter . Would you like to configur e another list ? [no]: You are now prompted to assign the desired ACLs to re[...]

  • Página 74

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide 5-16 OL-7826-0 5 Enter IP access -class [0]: 1 Enter Telnet ac cess-class [0]: 2 E XA MPL E 2: This example skips the first section of the dialog (creating/modifying), an[...]

  • Página 75

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 5-17 Step 5 The maximum number of GET communities is 20. • T o add more entries, ty pe y and press Enter • W ould you like to add another SNMP GET communit[...]

  • Página 76

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide 5-18 OL-7826-0 5 Step 13 The maximum number of trap managers is 20. • T o add more entries, ty pe y and press Enter Would you like to add another SNMP trap manager? [no[...]

  • Página 77

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 5-19 Step 9: Configuring the T opology-Dependent Parameters The topology configuration me nu is a series of guide d questions relating to the de ployment of th[...]

  • Página 78

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide 5-20 OL-7826-0 5 • On-Failure behavior — Determines the behavior of the SCE 2000 upo n failure, or reboot. One of the following link m odes may be chosen for the SCE [...]

  • Página 79

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 5-21 Enter Physicall y connected link: 0- link-0 1- link-1 Enter your choice [0]: Step 5 Specify the SCE 2000 priority . • T o specify Primary , press Enter [...]

  • Página 80

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide 5-22 OL-7826-0 5 E XA MPL E 2: Following is a sample topology configuration for a no n-redundant inline topology . In this topology , a single SCE 2000 is connected to on[...]

  • Página 81

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 5-23 Step 10: Completing and Saving the Configuration When you have completed the entire configuratio n, the system checks for errors. If errors are found, a w[...]

  • Página 82

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide 5-24 OL-7826-0 5 Do you want to save a copy of the startu p configura tion file i n a remote station? [no]: To save the configuration to a remote station, type y a nd pre[...]

  • Página 83

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Connecting the Management Interface Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 5-25 The running configura tion would be overw ritten by the changes you have just entered, are yo u sure? [ye s/no]: y The new running configurat ion w[...]

  • Página 84

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Connecting the Management Interface Cisco SCE 2000 4/8xFE Installation and Configuration Guide 5-26 OL-7826-0 5 Cabling the Management Port The SCE 2000 has two management ports, labeled Mng1 and Mng 2. T o cable the management port, complete the following s[...]

  • Página 85

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Connecting the Management Interface Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 5-27 At this point, check that the Link/Active LED is green. The state of the 10/100/1000 LED will de pend on the Ethernet network settings. Green indic[...]

  • Página 86

    [...]

  • Página 87

    Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 6-1 This chapter provides instructions for cabling the Fast Ethernet ports for both one and two SC E 2000 topologies, and for configuring Fast Ethernet (FE) interface parameters. In a topology utilizing two SCE 2000 s (cascade), this includes the cascade ports as well as the line[...]

  • Página 88

    Chapter 6 Cabling the Line Ports and Completing the Installation Connecting the line ports to the network Cisco SCE 2000 4/8xFE Installation and Configuration Guide 6-2 OL-7826-05 Cabling Diagrams Before beginning, find the appropriate cabling di agra m for the topology in your installation: • Single SCE 2000 topologies • Single Link: Inline T [...]

  • Página 89

    Chapter 6 Cabling the Line Ports and Completing the Installation Connecting the line ports to the network Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 6-3 In the single link inline topology , either the first FE link (FE-1 SUB/NET) of the SCE 2000 or the second FE link (FE-2 SUB/NET) can be used, as illu strated in the diag[...]

  • Página 90

    Chapter 6 Cabling the Line Ports and Completing the Installation Connecting the line ports to the network Cisco SCE 2000 4/8xFE Installation and Configuration Guide 6-4 OL-7826-05 Dual Link: Single SCE 2000 T opologies In this topology , one SCE 2000 is connected to two full duplex, FE links. The SC E 2000 may b e either inline, to support both mon[...]

  • Página 91

    Chapter 6 Cabling the Line Ports and Completing the Installation Connecting the line ports to the network Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 6-5 • FE-2 NET : Cascade, connect to FE-2 SUB in SCE 2000 #2 SCE 2000 #2 • FE-1 SUB: Link 2, Subscribers side • FE-1 NET : Link 2, Network side • FE-2 SUB: Cascade, c[...]

  • Página 92

    Chapter 6 Cabling the Line Ports and Completing the Installation Connecting the line ports to the network Cisco SCE 2000 4/8xFE Installation and Configuration Guide 6-6 OL-7826-05 Figure 6-4: Cabl ing Dia gr am: Dual Link Inline T opolog y Two Cascaded SCE Platf or ms Connecting the FE Line Interface Ports The following sections present the general[...]

  • Página 93

    Chapter 6 Cabling the Line Ports and Completing the Installation Connecting the line ports to the network Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 6-7 T o cable the SCE 2000 line port, complete the following steps: Step 1 T ake the appropriate fiber optic cable and plug it into the appropriate RJ-45 FE port on the front[...]

  • Página 94

    Chapter 6 Cabling the Line Ports and Completing the Installation Connecting the line ports to the network Cisco SCE 2000 4/8xFE Installation and Configuration Guide 6-8 OL-7826-05 V iewing the Counters to see that the Network T raffic is Reaching the Device In an inline topology , you can monitor traf fic via the platform counters for both t he Rx [...]

  • Página 95

    Chapter 6 Cabling the Line Ports and Completing the Installation Installing a Cascaded System Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 6-9 In packets discarded: 0 In packets with CRC/Alignm ent error: 0 In undersized p ackets: 0 In oversized pa ckets: 0 Out total octets: 93*2 ^32+1022342 538 Out unicast packets: 8 58086[...]

  • Página 96

    Chapter 6 Cabling the Line Ports and Completing the Installation Installing a Cascaded System Cisco SCE 2000 4/8xFE Installation and Configuration Guide 6-10 OL-7826-0 5 Step 9 Connect the traffic port of SCE 2000 #2, this will cause a m omentary down time until the network elements from both sides of the SCE 2000 auto-negotiate with it and starts [...]

  • Página 97

    Chapter 6 Cabling the Line Ports and Completing the Installation Installing a Cascaded System Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 6-11 T o configure the connection mode, use the following command: From the SCE 2000 (config if) # prompt, type connection-mode inline- cascade/receive-only-cascade [p hysically-connecte[...]

  • Página 98

    Chapter 6 Cabling the Line Ports and Completing the Installation Installing a Cascaded System Cisco SCE 2000 4/8xFE Installation and Configuration Guide 6-12 OL-7826-0 5 • Sniffing — allows the SCE platform to forward traf fic on the specified link through the bypass mechanism while still analyzing the traffic passively . Sniffing is perm itted[...]

  • Página 99

    Chapter 6 Cabling the Line Ports and Completing the Installation Loading and Activating a Service Control Ap plicati on Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 6-13 T o view the current link mode, use the following command: From the SCE 2000 # prompt, type show interface linecard 0 link mode and press Enter . T o view [...]

  • Página 100

    [...]

  • Página 101

    Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 7-1 This chapter describes how to start up the SCE 2000 platform, reboot, and shutdown. It also describes how to manage configurations. This chapter contains the following sections: • Starting the SC E 2000 Platform 7-1 • Managing SCE 2000 Configurations 7-4 • Performing Co[...]

  • Página 102

    Chapter 7 Basic SCE 2000 Platform Operations S tarting the SCE 2000 Platform Cisco SCE 2000 4/8xFE Installation and Configuration Guide 7-2 OL-7826-05 • SCE 2000 platform is connected to at least one of the following types of managem ent stations: • Direct connection to local console (CON port) • Remote management station via the LAN (Mng por[...]

  • Página 103

    Chapter 7 Basic SCE 2000 Platform Operations S tarting the SCE 2000 Platform Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 7-3 If the system does not complete each of the st eps in the startup procedure, proceed to T r oubleshooting (on page 8-1 ) for troubleshooting recommendations and procedures. Final T ests The procedure[...]

  • Página 104

    Chapter 7 Basic SCE 2000 Platform Operations Managing SCE 2000 Confi gurations Cisco SCE 2000 4/8xFE Installation and Configuration Guide 7-4 OL-7826-05 Logger device U ser-File-Lo g counters: Total info messages: 1 Total warning m essages: 0 Total error mes sages: 0 Total fatal mes sages: 0 If there are “T otal error messages” or “T otal fat[...]

  • Página 105

    Chapter 7 Basic SCE 2000 Platform Operations Managing SCE 2000 Confi gurations Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 7-5 flow-aging defa ult-timeout UDP 60 interface FastEthe rnet 0/0 ip address 10.1.5.109 255.255.0.0 interface FastEthe rnet 0/1 interface FastEthe rnet 0/2 exit line vty 0 4 no timeout exit SCE 2000 #[...]

  • Página 106

    Chapter 7 Basic SCE 2000 Platform Operations Managing SCE 2000 Confi gurations Cisco SCE 2000 4/8xFE Installation and Configuration Guide 7-6 OL-7826-05 snmp-server com munity “pub lic” ro snmp-server hos t 10.1.1.25 3 traps versio n 1 “public ” interface LineCard 0 connection-mode active no silent no shutdown flow-aging defa ult-timeout UD[...]

  • Página 107

    Chapter 7 Basic SCE 2000 Platform Operations Performing Complex Configur ations Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 7-7 Note that you cannot undo the configuration restore command. Step 3 Ty p e copy tffs0:system/prevconf/config.tx1 tffs0:system/config.txt . The system sets the startup configuratio n to the configu[...]

  • Página 108

    Chapter 7 Basic SCE 2000 Platform Operations Displaying the SCE Platform V ersion Inform ation Cisco SCE 2000 4/8xFE Installation and Configuration Guide 7-8 OL-7826-05 Displaying the SCE Platform V ersion Information Use this command to display global static inform ation on the SCE platform, such as software and hardware version, image build time,[...]

  • Página 109

    Chapter 7 Basic SCE 2000 Platform Operations Displaying the SCE Platform Inventory Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 7-9 Platform: SCE 2 000 - 4xGBE Management agen t interface version: SCE Agent 3.0.5 Build 18 Software packag e file: ftp://vk:vk@10. 1.8.22/P:/E MB/LatestVersi on/3.0.5/se 1000.pkg SCE 2000 uptime[...]

  • Página 110

    Chapter 7 Basic SCE 2000 Platform Operations Displaying the System Uptime Cisco SCE 2000 4/8xFE Installation and Configuration Guide 7-10 OL-7826-0 5 Displaying the System Uptime Use this command to see how long the system has been running since the last reboot. T o show the sy stem uptime for the SCE platform , use the following command: At the SC[...]

  • Página 111

    Chapter 7 Basic SCE 2000 Platform Operations Rebooting and Shutting Do wn the SCE Platform Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 7-11 Shutting Down the SCE Platform Shutting down the SCE platform is required before turning the power of f. This helps to ensure that non-volatile memory devices in the SCE platform are p[...]

  • Página 112

    [...]

  • Página 113

    Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 8-1 Y our SCE 2000 platform went through extensive testing before leaving the factory . However , if you encounter problems starting it, use the information in this chapter to help isolate the cause of the problems. The procedures in this chapte r assume that you are troubleshoot[...]

  • Página 114

    Chapter 8 T roubleshooting T roubleshooting T ools Cisco SCE 2000 4/8xFE Installation and Configuration Guide 8-2 OL-7826-05 The following table shows the general troubleshooting strategy described in th is chapter . Refer to this table, as necessary , to follo w the steps to isolate problems to a specific subsystem and resolve the problem if possi[...]

  • Página 115

    Chapter 8 T roubleshooting T roubleshooting T ools Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 8-3 • Boot system <filename> — Specifies and verifies the package file to be installed. Error messages or other output iden tify problems with the package file. Following is a sample output from the Boot system command.[...]

  • Página 116

    Chapter 8 T roubleshooting T roubleshooting T ools Cisco SCE 2000 4/8xFE Installation and Configuration Guide 8-4 OL-7826-05 Following is a sample output from the show interface command. ip address: 10. 1.6.145 subnet mask: 255.255. 0.0 Configured duplex: auto AutoNegotiation is On, lin k is Up, actua l duplex: h alf • show interface FastEthernet[...]

  • Página 117

    Chapter 8 T roubleshooting T roubleshooting T ools Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 8-5 Copying the User Log Y ou can view the log file by copying it to an external source or to disk. This command copies both log files to the local SCE platform disk or any external host running a FTP server . T o copy the user l[...]

  • Página 118

    Chapter 8 T roubleshooting T roubleshooting T ools Cisco SCE 2000 4/8xFE Installation and Configuration Guide 8-6 OL-7826-05 Step 2 The system asks Are you sure? Step 3 Ty p e Y and press Enter . The SCE 2000 # prompt appears. V iewing the User Log Counters There are two types of log counters: • User log counters — count the number of system ev[...]

  • Página 119

    Chapter 8 T roubleshooting T roubleshooting T ools Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 8-7 Generating a File for T echnical Support In order for technical support to be most ef fective, the user should provide them with the information contained in the system logs. Use the logger get support-file command to generat[...]

  • Página 120

    Chapter 8 T roubleshooting Problem Solving Using a Subs ystems Approa ch Cisco SCE 2000 4/8xFE Installation and Configuration Guide 8-8 OL-7826-05 SCE 2000 Operational Status Description Status LED State Warning SCE 2000 is fully operational (as above) but one of t he following occurred: • Line ports (FE ports) to t he link are do wn • Manageme[...]

  • Página 121

    Chapter 8 T roubleshooting Problem Solving Using a Subs ystems Approa ch Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 8-9 • When all LEDs come on to indicate that the sy stem has booted successfully , the initial system banner should be displayed on the cons ole screen. If it is not displayed, see Connecting the Local Con[...]

  • Página 122

    Chapter 8 T roubleshooting Problem Solving Using a Subs ystems Approa ch Cisco SCE 2000 4/8xFE Installation and Configuration Guide 8-10 OL-7826-0 5 Faulty power supply. If the system still fails to come up when the power supply is connected to a differe nt power source with a new powe r cable, the power supply unit is probably faulty. Con tact a s[...]

  • Página 123

    Chapter 8 T roubleshooting Problem Solving Using a Subs ystems Approa ch Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 8-11 Symptom Possible Caus e Possible Solution Returned error is: Error—File <file name> does not exist The package fi le does not exist in the specified location. Verify package file location and tr[...]

  • Página 124

    Chapter 8 T roubleshooting Problem Solving Using a Subs ystems Approa ch Cisco SCE 2000 4/8xFE Installation and Configuration Guide 8-12 OL-7826-0 5 T able 8-6 T r oubleshooti ng the Mana gement Subsystem Symptom Diagnostic Action Po ssible Cause Possible Solution Management link down: • Mng LINK LED not lit • Status is WARNING (Status LED is f[...]

  • Página 125

    Chapter 8 T roubleshooting Problem Solving Using a Subs ystems Approa ch Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 8-13 CLI comman d : show telnet sessions Too many Tel net connections (up to 5 concurrent sess ions are supported). Close one or more of th e open Telnet sessions. CLI comman d : show ip default- gateway Def[...]

  • Página 126

    Chapter 8 T roubleshooting Problem Solving Using a Subs ystems Approa ch Cisco SCE 2000 4/8xFE Installation and Configuration Guide 8-14 OL-7826-0 5 • Peer does not receive traffic from SCE 2000 (FE link is lit and Tx LED is flashing) • FE link is up but not receiving from peer (FE link is lit, but Rx LED is not flashing) T able 8-7 Troubleshoo[...]

  • Página 127

    Chapter 8 T roubleshooting Problem Solving Using a Subs ystems Approa ch Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 8-15 Auto-negotiation is disabled at the SCE 2000 but enabled at peer. Check auto-nego tiatio n configuration in the SCE 2000 and in pe er.[...]

  • Página 128

    [...]

  • Página 129

    Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 I-1 A Airflow • 4-3 Attaching a Chassis Ground Connection • 4- 10 Attaching the Brackets to the SCE 2000 • 4- 7 Attaching the Crossrail Supports to the Rack • 4-8 Audience • vi B Back Panel • 2-4 Basic SCE 2000 Platform Operations • 7-1 Bypass Mechanism • 3-3 C Ca[...]

  • Página 130

    Index Cisco SCE 2000 4/8xFE Installation and Configuration Guide I-2 OL-7826-05 G General Overview • 1-1 Generating a File for Technical Support • 8- 7 I Identifying Startup Problems • 8-8 Initial System Configuration • 5-3 Installation and Maintenance • 4-1 Installation Precautions • 4-5 Installing a Cascaded System • 6-9 Installing [...]

  • Página 131

    Index Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 I-3 Single Link Inline Topology • 3-4, 6-2 Receive-only Topology • 3-5, 6-3 Single SCE 2000 Topologies • 3-4 Site Requirement Guidelines • 4-3 Site Requirements • 4-3 Starting the SCE 2000 Platform • 7-1 Starting the System and Observing Initial Conditions • 7[...]