AirLink AR695W manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99

Ir a la página of

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones AirLink AR695W. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica AirLink AR695W o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual AirLink AR695W se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales AirLink AR695W, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones AirLink AR695W debe contener:
- información acerca de las especificaciones técnicas del dispositivo AirLink AR695W
- nombre de fabricante y año de fabricación del dispositivo AirLink AR695W
- condiciones de uso, configuración y mantenimiento del dispositivo AirLink AR695W
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de AirLink AR695W no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de AirLink AR695W y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico AirLink en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de AirLink AR695W, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo AirLink AR695W, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual AirLink AR695W. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

    Wireless N 300 Gigabit Green Router Model # AR695W User ’ s Manual Ve r. 1 A[...]

  • Página 2

    Copyright Copyright © Airlink101, 2010. The content s of this publication may not be reproduced in any part or as a whole, st ored, transcribed in an informati on retrieval system, translated into any language, or transmitted in any fo rm or by any means, mechanical, magnetic, electronic, optical, photocopying, manual, or otherwise, without the pr[...]

  • Página 3

    T able of Content s CHAPTER 1 PRODU CT INFOR MA TION .................................................................................................. ............ 1 1.1 I NTRODUCTION A ND SAFETY INFORMA TIO N ......................................................................................................... 1 1.2 P ACKAGE C ONTENTS ........[...]

  • Página 4

    3.4.7 Schedule Rule ............................................................................................................ ................................83 3.5 T OOLBOX ........................................................................................................................................................... 85 3.5.1 V iew Lo[...]

  • Página 5

    1 Chapter 1 Product Information 1.1 Introduction and safety information Congratulations on your purchase of the Airlink101® AR695W Wireless N 300 Gigabit Green Router . This Router is re commended to be used with AirLink101 ® Wireless N 300 products to provide the best performance. The high bandwidth combined with extended wireless coverage deliv[...]

  • Página 6

    2 1.2 Package Contents Before you start using this router , please ch eck if there’ s anything missing in the package, and contact your dealer of purchase to claim for missing items: 1. Wireless N 300 Gigabit Green Router 2. T wo Antennas 3. Power Adapter 4. Setup CD 5. Quick Installation Guide 6. Ethernet Cable[...]

  • Página 7

    3 1.3 Familiar with your new Gigabit Router A. Front Panel LED Status Description Status Blinking (Green) Device status is working properly. On (Green) Router is on. On/Sleep Off Router is at power saving mode. On (Green) Network device is connected WAN Blinking Data access On (Green) Network device is connected LAN 1~4 Blinking Data access On (Gre[...]

  • Página 8

    4 B. Back Panel Item Name Description Antennas These antennas are det ac hable 3dBi dipole antennas. ON/OFF Switch on/off the router . 1 - 4 Local Area Network (LAN) ports 1 to 4. W AN Wide Area Network (W AN / Internet) port. PWR Power connector , connect s to A/C power adapter .[...]

  • Página 9

    5 Chapter 2 Configure the Router 2.1 Connect the Router to your network Note: Prior to connecting the router , be sure to power of f your computer , DSL/Cable modem, and the router . Ste p 1 Connect one end of a network cable to the WA N port of the router and connect the other end of the cable to the DSL/Cable modem. Ste p 2 Power on the modem. St[...]

  • Página 10

    6 Ste p 4 Plug the power adapter to the router and connect it to an electrical outlet. Make sure the power switch at the back is “On”. Step 5 Power on your computer. Ste p 6 Check LEDs of the router: make sure Statu s , WA N , Wi re les s , and the LAN port that the computer is connected to are lit.[...]

  • Página 11

    7 2.2 Configure the Router with EZ Setup Wizard Ste p 1 Insert the Setup CD into CD-ROM drive. Ste p 2 When the autorun menu pops up, click EZ Setup Wizard. Note: If the autorun menu does not show up on your monitor , please go to Computer Æ CDROM drive Æ Wizar d , and execute “ EZWizard.exe ”.[...]

  • Página 12

    8 Ste p 3 Select your language and click Next . Ste p 4 Click on Wiz ard .[...]

  • Página 13

    9 Ste p 5 Please make sure your computer is c onnected to the LAN port of the router , and your modem is connected to t he W AN port of the router . Step 6 Click Next to configure the basic wireless settings.[...]

  • Página 14

    10 Step 7 Configure the SSID (wirel ess network name, i.e. my Home), Channel, Security and Key. It is suggested to select WPA2-PSK for best wireless security. Ente r 8~63 characters into Key box, then click Next . Ste p 8 Click Next and the wizard will detect your W AN se ttings, or you can select your W AN type manually by checking “Let me selec[...]

  • Página 15

    11 Ste p 9 Enter the settings based on your W AN service type. Cable (Dynamic IP) If you are using cable Internet service, your W AN type is “Dynamic IP”. Y ou do not need to configure anything here, then click Next to continue. DSL (PPPoE or Dynamic IP) For DSL users, your WA N type is either PPP oE or Dynamic IP . Y ou can try both types and [...]

  • Página 16

    12 For PPPoE settings, please enter the username and password provided by your ISP (Internet Service Provider). Note: Depending on the ISP , you may need to include the domain name with your username. Example: username@sbcglobal.net Step 10 V erify the settings you have configured. Click Next to save the settings and reboot the router . This will t[...]

  • Página 17

    13 Ste p 1 1 Click Next to test the Internet Connection, or you can ignore the test, just open the Internet browser and verify if you are connected to the Internet. If you cannot connect to t he Internet, please go to Section 4, T roubleshooting . Step 12 After the W AN service test completed, click Finish . The wizard will open the web configurati[...]

  • Página 18

    14 Y ou will see the status of t he router on the web configurat ion p age brought up by the web browser . V alid numbers should be assigned to IP Address, Subnet Mask and Gateway , instead of all 0’ s.[...]

  • Página 19

    15 2.3 Configure the Router with Web Configuration Utility Another approach to configure t he router is using the Wizard in the Web Configuration Utility . The wizard will guide y ou setting up the basic settings of this router . Y ou do not need to go through the wizard again if you have finished 2.2 Configure the Router with EZ Setup Wizard. In o[...]

  • Página 20

    16[...]

  • Página 21

    17 Step 4 Click Next to start the Setup Wizard. Ste p 5 Change System Password. Enter the current password, new password and reconfirm the new password. (The default password is ‘admin’.) If you do not wish to change the password, please leave all fields blank. Click Next .[...]

  • Página 22

    18 Ste p 6 Select Auto Detecting W AN T ype to let the wizard detect which Internet connection you use or select Setup W AN T ype M anually to select the Internet connection type manually . Click Next . If you select Setup W AN T ype Manually , please specify a W AN type you are using. For Cable Users: Please select Obt ain an IP address from ISP a[...]

  • Página 23

    19 Address) or Some ISPs require the use of PPPoE to connect to their services (PPP over Ethernet) depending on the type of modem provided by your ISP (Internet Service Provider). Y ou can try both settings and determine which one works for you. Click Next . Ste p 7 Configure the WAN settings accordin g to the WAN type you selected. Dynamic IP Addr[...]

  • Página 24

    20 PPP over Ethernet: Enter the Account and Password provided by your ISP . Note: Depending on the ISP , you may need to include the domain name with your username. Example: username@sbcglobal.net Ste p 8 Keep the default SSID (wireless network name) or change it to a desired name, so you can always recognize your wireless net work with it, for exa[...]

  • Página 25

    21 Ste p 9 Set up Wireless Security for your router . It is recommended to select WP A2-PSK (AES) for security to protect your wirel ess network from u nauthorized users. Type in 8~63 characters into Preshare Key . Click Next . WPA2-PSK (AES) is the most secured enc ryption mode for general users but some older wireless adapters might not support i[...]

  • Página 26

    22 Step 10 V erify the information you have configur ed. If everything is correct, click Apply Settings to save the settings and reboot router . Ste p 1 1 When you see window like below , you are successfully connected to the Internet. Click Finish . Congratulations! Y our router configurat ion has been finishe d. Please go to 2.4 Connect to the Ro[...]

  • Página 27

    23 2.4 Connect to Router Wirelessly Y ou must configure your wireless computer in order to est ablish a wireless connection to the router . In this section, you can find the instructions of how to connect to the router wirelessly with your Windows 7 computer . Y ou can also re fer to the manual of your wireless device on how to connect to the route[...]

  • Página 28

    24 Ste p 2 Enter the key you configured for the r outer if you have enabled the wireless security , then click OK . The wireless connection should be now est ablished.[...]

  • Página 29

    25 Chapter 3 Advanced Configuration You can make advanced configurations on this router through Web C onfigur ation Utility to meet your network’s needs, such as: Virtual Server, Access Control, Network Security, etc. If you have already gone th rough the Setup Wizard, you do NOT need to configure anything here for you to start using the Internet[...]

  • Página 30

    26[...]

  • Página 31

    27 3.1 Basic Setting Y ou can configure LAN, Internet connec tion type, DHCP , wireless settings and system password for the router in this p age.[...]

  • Página 32

    28 3.1.1 Primary Setup This page allows you to specify an IP address fo r your router, and configure the Internet connection settings. Parameter Description LAN IP Address The local IP address of this router. Y ou can chang e it if necessary . WAN Ty pe Displaying the current WAN (Wide Area Network , i.e. Internet) connection type you configured fo[...]

  • Página 33

    29 Select a W AN type from the list and click Save . A. Static IP Address: Click on Static IP Address if your I SP (Internet Service Provider) has provided you a set of IP addresses for your Internet connection. B. Dynamic IP Address: Click on Dynamic IP if you are connecting to Internet through a cable modem. C. Dynamic IP Address with Road R unne[...]

  • Página 34

    30 A) Static IP Address Enter the WAN IP address, WAN Subnet Mask, WAN Gateway, Primary D NS , and Secondary DNS addresses pr ovided by your ISP. After you finished all settings, click Save to save the settings and click Reboot . The change will take effect after rebooting the router. B) Dynamic IP Address[...]

  • Página 35

    31 Parameter Description Host Name Please input the host name of your router; this is optional and only required if your service provide r asks you to do so. WAN’s MAC Addre ss Please input MAC address of your comp uter here if your ISP only permits computer with certain MAC address to access Internet. If you are using the computer which used to [...]

  • Página 36

    32 C) Dynamic IP Address with Ro ad Runner Session Management: Please enter the account and password prov ided by your T elstra Big Pond ISP . Parameter Description Account Please input user name of your account assigned by T elstra. Password Please input the password assigned by T elstra. Login Server Please input the IP address of login server he[...]

  • Página 37

    33 D) PPP Over Ethernet (PPPoE) Parameter Description PPPoE Account Enter the User Name for your DS L account, you can obt ain this information from your ISP . PPPoE Password Enter the Password for your DSL account, you can obtain this information from your ISP . Primary DNS This feature allows you to assign a Primary DNS Server . Y ou can obtain t[...]

  • Página 38

    34 to the ISP af ter the connection is establi shed. Manually: Router will not connect to the ISP until user clicks the Connect button on the S tatus-pag e. PPPoE Service Name Enter the DSL service company . This is optional. Assigned IP Addre ss Input the IP addre ss you wish to use. This is optional. MTU (Maximum T ransmission Unit) The most comm[...]

  • Página 39

    35 Parameter Description IP Mode Select the type of how you obtain IP address from your service provider here: S tatic IP Ad dress or Dynamic IP Address. My IP Address Enter the IP addre ss assigned by your ISP if you select S tatic IP Address. My Subnet Mask Enter the Subnet Mask assigned by your ISP if you select S tatic IP Address. Gateway IP En[...]

  • Página 40

    36 E) L2TP Parameter Description IP Mode Select the type of how you obtain IP address from your service provider here: S tatic IP Ad dress or Dynamic IP Address. My IP Address Enter the IP addre ss assigned by your ISP if you select S tatic IP Address. My Subnet Mask Enter the Subnet Mask assigned by your ISP if you select S tatic IP Address. Gatew[...]

  • Página 41

    37 session. Set it to zero or enable “A uto-reconnect” to disable this feature. Connection Control There are 3 modes for you to control the Internet connectio n: Connect-on-demand: Router will conn ect to the ISP when its client sends outgoing p ackets. Auto Reconnect (Al ways-on): Router will keep the connection to the ISP af ter the connectio[...]

  • Página 42

    38 3.1.2 DHCP Server This page allows you to configure the DHCP settings for your router. Parameter Description DHCP Server Select Disable or Enable the DHCP server . Lease Time DHCP lease time to the DHCP client. Please enter a number between 5 to 10080. 10080 Minutes = 7 days. IP Pool S t arting/Ending Address Whenever there is a reque st from a [...]

  • Página 43

    39 Primary DNS/Secondary DNS This is optional. This feature allows you to assign a Pri mary / Secondary DNS Server . Primary WINS/Secondary WINS This is optional. This feature allo ws you to assign a WINS Server . Gateway This is optional. Gateway address ca n be the IP address of an alternate Router . Client List Click on Client List to view DHCP [...]

  • Página 44

    40 3.1.3 Wireless You can set parameters that ar e used for wireless clients to connect to this router. The parameters include SSID, Channe l Number, Encryption etc. Parameters Default Description W i r e l e s s Enable Enable or disable wireless function. Wireless On/Off by Disable Select a pre-defined schedule rule from the drop -down Time schedu[...]

  • Página 45

    41 routers in the same area. It’ s recommended to change default SSID value to the one which is meaningful to you, like myhome, of fice_room1, etc. W i r e l e s s M o d e 1 1b/g/n mixed Please select the wirele ss mode from one of the following options: 1 1b/g/n mixed: 2.4GHz band, allows 802.1 1b, 802.1 1g, and 802.1 1n wireless net work client[...]

  • Página 46

    42 Configuring Security - WEP Note: IEEE802.11n only supports WPA2-PSK or WPA-PSK AES encryption. If you use WEP as your encryption, wireless data rate will drop to 54Mbps (802.11g standard). Key Mode : Select HEX or ASCII. You can sele ct ASCII (alphanumeric format) or Hexadecimal (in the “a~f” and “0 ~9” range) for the key format. WEP : S[...]

  • Página 47

    43 communication, so the encryption key is not easy to be broken by hackers. This can greatly improve your wireless security.WPA2-PSK AES is the most secured setting for general users. Security : Select WPA-PSK or WPA2-PSK Encryption : Select either AES or TKIP. It is suggested to select AES if all your wireless computers / devices su pport this en[...]

  • Página 48

    44 Encryption Key Length : Y ou can select either 64 bits or 128 bits. RADIUS Server IP : The RADIUS server's IP address. RADIUS port : The RADIUS server's service port. RADIUS Shared Key : Key value shared by the RADIUS server and this router . This key value should be consistent with the one in the RADIUS server . Configuring Security -[...]

  • Página 49

    45 RADIUS port : The RADIUS server's service port. RADIUS Shared Key : Key value shared by the RADIUS server and this router . This key value should be consistent with the one in the RADIUS server . After you finished all settings, click Save to save the settings and click Reboot . The change will take effect after rebooting the router. 3.1.3.[...]

  • Página 50

    46 Before you set up WDS bridging: 1) Make sure your wireless computer c an associate with individual router/AP. 2) Configure the same c hannel for every router/AP. 3) Configure a unique different SSID for every router/AP in order to distinguish each unit on your wireless LAN. 4) Configure a static IP addr ess for every router/AP. Make sure all IP [...]

  • Página 51

    47 3.1.3.2  WPS  (Easy  Setup  Button)  The AR695W Wireless N 300 Gigabit Green R outer has a built-in Easy Setup Button (WPS) which allows you to build secured wireless connection between your wireless computers and the rout er quickly and easily. Please make sure your wireless device support this feature as well. If not, you will n[...]

  • Página 52

    48 Step 3 Within the following 2 minutes, push the WPS Button on the Router and hold for 1 second. The wireless LED wi ll start blinking quickly. Step 4 The Router will now start the handsh ake with the wireless adapt er which will take about 30 seconds. When you see the window si milar to t he one below, the connection has been established.[...]

  • Página 53

    49 T o configure the WPS settings of the router , go to Advanced > Basic Setting > Wireless , then click on WPS button. There are two methods to activate WPS – PIN and PBC. 1) PIN (Personal Identification Number) Y ou can choose to enter the numbers generated by this router displaying in “Current PIN of the device” to the wirel ess clie[...]

  • Página 54

    50 enter the PIN generated by the wir eless client computer into Enrollee PIN , and click T rigger button to start WPS. 2) PBC (Push Button Configuration) Y ou can choose to press the hardware button on the front panel of t he router , or select Configure Wireless S tation, Software button, and click T rigger button to start WPS. Parameters Descrip[...]

  • Página 55

    51 WPS State It displays “Idle” when there is no WPS session g oing on, “Processing” whe n WPS is in progress, or “Complete” when WPS is finished. WPS Status It displays “Configured” if WPS setup is succe ssful, or “Unconfigured” if WPS setup fails. Click Save after you finished all settings. 3.1.3.3  Wireless  Client  [...]

  • Página 56

    52 3.1.4 Change Password You can change the password required to log in to the Router’s web configuration utility. The default password is “admin ”. It is suggested to change the administrator’s default password as soon as you start to use the R outer, and store it in a safe place. The password consists of 0 to 9 alphanumeric characters, an[...]

  • Página 57

    53 3.2 Forwarding Rules 3.2.1 V irtual Server If you want to host a HTTP/FTP server or a llow remote access to your IP camera on the LAN from the Internet, you must set up port forwarding rules on the router in order to direct incoming traffic to the se rver or IP Camera. This page allows you to set up to 20 port forwarding rules for the specified [...]

  • Página 58

    54 Protocol This is the protocol type to be forwarded. Y ou can choose to forward “TCP” or “ UDP” pack ets only or select “Both” to forward both “TCP” and “UDP” p ackets. Enable Check to enable this forwarding rule. Schedule Rule# Enter a Schedule Rule number to enabl e the forwarding rule only within the desired time frame. Ple[...]

  • Página 59

    55 3.2.2 Special Applications Some applications require multiple connecti ons, such as Internet gaming, video conferencing, Internet telephony and others. These applications cannot work when Network Address Translation (NAT) is enabl ed. If you need to run applications that require multiple connections, specify the por t normally associated with an[...]

  • Página 60

    56 Note: Only one PC can use each Specia l Application tunnel at same time. If the mechanism of Special Applications fa ils to m ake an application work, try setting your computer as the DMZ host instead. Click Save after you finished all settings. 3.2.3 Miscellaneous If you have a local client PC that cannot run an Internet appl ication (e.g. Game[...]

  • Página 61

    57 Super DMZ (IP Passthrough) Select Super DMZ when your computer or server on the Local Area Network needs to allow access from the Interne t with a real public IP address. With IP Passthrough configured, all IP traf fic, not just TCP/ UDP , is forwarded back to the host computer . This can be necessary with ce rtain types of softwa re that do not[...]

  • Página 62

    58 3.3 Security Setting This function allows you to configure Inte rnet access rules for your local computers based on the IP address, MAC addr ess, URL or keywords. 3.3.1 Packet Filtering Packet Filtering allows you to control acce ss to a network by analyzing the incoming and outgoing packet s and letting them pass or halti ng them based on the I[...]

  • Página 63

    59 Computers with IP addresses between 192.168.2. 20 to 192.168.2.50 have no restriction on accessing any network services, while other s computers are all blocked. Meanwhile, computers with IP addresses between 192. 168.2.100 to 192.168.2.199 are allowed to send Email (port 25), receive E-mail (por t 1 10), and browse Internet (port 80). For each [...]

  • Página 64

    60 Port Please input the port number here. Y ou can define a single port (80) or a range of port s (1000-1999). Add prefix "T" or "U" to specify TCP or UDP protocol, for exam ple, T80, U53, U2000-2999. No prefix indica tes both TCP and UDP are defined. Leaving this field blank indicates all port s . Enable Check/uncheck Ena ble [...]

  • Página 65

    61 3.3.2 Domain Blocking Y ou can block users from accessing specific domains on the internet. This feature can help parent s to manage the Internet usage fo r their children (i.e. Parental Control). Parameter Description Domain Filter Check/Unche ck Enable to enable/disable Domain Filter . Log DNS Query Check/Unche ck Enable to enable/disable logg[...]

  • Página 66

    62 Link request to xyz.com will be dropped and re corded in log file. Link request to www .abc.co m will be allowed but will be recorded in log file. Link request to msn.com will be drop ped and will not be recorded in log file. However , IP Address from 192.168.2.10 to 192.168.2. 20 will not be restricted. Enable Chec k/Uncheck Enable to enable/di[...]

  • Página 67

    63 3.3.3 URL Blocking Y ou can block access to certain websites or web content s from local PCs by entering a full URL address or just keywords. The major difference between “Domain Filter” and “URL Block ing” is that Domain F ilter requires user to input a su ffix (like .com or .org, etc), while URL Blocking requires user to input a keywor[...]

  • Página 68

    64 Rule for detai led setting instructions. Set 0 to let the filtering rule always take ef fect. Click on Save after you finished all settings. 3.3.4 Internet Access Control MAC Access Control will help you to prevent unauthorized users from connecting to your wireless router. Only those network devices with MAC addre sses you specified here are al[...]

  • Página 69

    65 drop-down list and select an ID, click “Copy to ”. The MAC address of the computer you selected will be automatically filled into the specific ID. Make su re the Enable box is checked. Click on Save after you finished all settings. This router offers 3 types of Internet Access Control: • MAC Address Control: allo w or deny Internet access [...]

  • Página 70

    66 3.3.4.1 MAC Address Control This feature allows you to control Inte rnet access based on MAC address and time schedule. Parameters Description MAC Access Control Check this box to enable the MAC filtering function. All settings in this page will t ake effect on ly when Enable is checked. Connection Control Check this box to enable the rule that [...]

  • Página 71

    67 DHCP Client s Select a DHCP client from t he drop down list. Select an ID number and click Copy T o . The client’s MAC address will be copied to the ID you selected; you do no t need to enter it manually . MAC Address Input the MAC address of your compute r / network device. C Check this box to allow the wired/wirele ss client connecting to th[...]

  • Página 72

    68 3.3.4.2 Group MAC Access Control This feature allows you to define user groups and map them wit h schedule control to allow Internet access within specific time frame. In the example below , two groups have been added with dif ferent schedule rule: Group List 1 has two computers with Schedule Rule 1. The two computers in Group 1 can only access [...]

  • Página 73

    69 1. Enter MAC address manually or select one from the DHCP client list, and click “ <<Copy ” to copy the MAC address of the client computer / network device. 2. Assign a group numbe r by selecting a number from the drop-down list. 3. Select a time schedule rule from the drop-down list. 4. Click Add . 3.3.4.3 Interface Access Control Int[...]

  • Página 74

    70 Schedule Rule Select a Schedule Rule from the drop-down list. Please refer to 3.4.7 Schedule Rule for det ailed setup instructions. Deny Check/Un check Deny to deny/allow network access from an Interface within the selected schedule ru le. Click on Save after you finished all settings. 3.3.5 Miscellaneous Parameters Description Remote Administra[...]

  • Página 75

    71 period of time. Y ou may set the time-out period to zero to disable this feature. Discard PING from W AN side Check this box to enable Discard PING from W AN side. When you enable this feature, your router will not respon d to a “ping” request from any host on the W AN side. SPI Mode S tateful Packet Inspection mode is a firewall that keep s[...]

  • Página 76

    72 3.4 Advanced Setting This page allows you to set up system time, log, DDNS, routing, QoS, schedule rule, and other advanced settings. 3.4.1 System T ime S pecify correct system time for your router is very important. It will af fect the schedule rule and system logs. This router provides 3 ways to configure the system date and time: 1) Synchroni[...]

  • Página 77

    73 Parameter Description System T ime Displaying the current system time of router . Sync No w Click this button to synchronize the system time with the desire d time server . (The router must be connected to the Internet to be able to synchronize time.) Tim e S e r ve r Select a time server here. Time Zone Y ou can select your local time zone here[...]

  • Página 78

    74 3.4.2 System Log Y ou can enable this function to log all import ant system event s for y our router . This p age supports two methods to export system logs to specific destination by means of syslog (UDP) and SMTP (TCP). Parameters Description IP Address of Syslog Server Enter the host IP of destination where sy stem log will be sent to. Check [...]

  • Página 79

    75 you do not specify port number , the default value is 25. For example, "mail.abc.com" or "192.168.1.100/25". Email Addresses Enter the Email addresses of the recipient s who will receive these logs. Y ou can assign mo re than 1 recipient by using ';' or ',' to separate these Email addresses. Email Subject [...]

  • Página 80

    76 3.4.3 Dynamic DNS Parameter Description DDNS Select Disable or Enable DDNS fun ction. Provider A DDNS provider provides servic e for you to bind your IP (even private IP) with a certain Domain na me. Choose a desired provider . Provider Website Click Provider We bsite to go to the selected DDNS provider ’s website. Host Name Y ou can register [...]

  • Página 81

    77 3.4.4 QoS Rule Quality of Service provides an efficient wa y for computers on the network to share the Internet bandwidth with a promised quality of Internet service. Without QoS, all computers and devices on the network will co mpete with one another to get Internet bandwidth, and some applications which r equire guaranteed band width (like vid[...]

  • Página 82

    78 Remote IP Address S pecify a remote (destination) IP address that will be af fected by this rule. Port s Please input the range of remote (destination) po rt number that will be affected by this rule. If you want to apply this rule on port 80 to 90, please input “80-90”; if you want to apply this rule on a single port, just input the port nu[...]

  • Página 83

    79 3.4.5 SNMP Parameter Description Enable SNMP Y ou must check either Local or Remote or both to enable SNMP function. If Local is checked, this devic e will response request from LAN. If Remote is checked, thi s device will response requ est from W AN. Get Community Setting the community of GetRequest your devic e will response. Set Community Set[...]

  • Página 84

    80 3.4.6 Routing Routing T able allows you to determine which physi cal interface address to use for outgoing IP dat a grams. If you have more than one routers and subnets, you will need to enable routing table to allow p ackets to fi nd proper routing path and allow dif ferent subnets to communicate with each other . For static routing, you can sp[...]

  • Página 85

    81 For Example: Configuration on S tatic Routing Destination Subnet Mask Gateway H op Enabled 192.168.1.0 255.255.255.0 192.168.123.216 1 √ 192.168.0.0 255.255.255.0 192.168.123.103 1 √ When Client3 wants to send an IP data gram to 192.168. 0.2, it will use the above table to determine that it has to go via 192.168.123.103 (a gateway), and if i[...]

  • Página 86

    82 St atic Routing Select Enable or Disable to enabl e or disable S tatic Routing function. Destination Enter a destination IP address. The Destination IP is the address of the remote network or host to which you want to assi gn a static route. Subnet Mask Enter the subnet mask. The Subnet Mask d etermines which portion of a Destination IP addres s[...]

  • Página 87

    83 3.4.7 Schedule Rule You can configure schedule rules to contro l the time frame of network access. Parameter Description Schedule Check or uncheck Enable to enabl e or disable the schedule rule. Rule# Displaying rule numbers. Rule Name Displaying rule names that have been added to the schedule rule table. Action Click on Edit to modify the sched[...]

  • Página 88

    84 3.4.7.1  Add  New  Rule  Y ou can add a new schedule rule in this page. Parameter Description Name of Rule# Enter a name for the new rule. System T ime Displays the current system time of the router for you to verify if this matches with the date/time of wh ere you are located. Y ou can see 3.4.1 on how to modify the system time. Wee[...]

  • Página 89

    85 3.5 T oolbox The Toolbox page allows you to view syst em logs, upgrade firmware, save/reload configuration settings, reset fa ctory default settings, reboot the router, and perform ping test.[...]

  • Página 90

    86 3.5.1 V iew Log Y ou can view , download, and clear the syst em logs stored in the router here.[...]

  • Página 91

    87 3.5.2 Firmware Upgrade You can view the current firmware version of router in this page. To upgrade the firmware for the router, you must use a comput er that is wired connected to the router. Firstly, you need to download the firmware from www.airlink101.com and save it to your local hard disk first. You may need to unzip it if it is a .zip fil[...]

  • Página 92

    88 3.5.3 Backup Setting Y ou can save the router ’s configuration sett ings to your local hard disk by clicking on Backup Setting and save it as a .bin file. On ce you need to restore the settings, please go to Firmware Upgrade page and load the .bin file you saved. 3.5.4 Reset to Default T o restore the router settings to factory default, click [...]

  • Página 93

    89 3.5.5 Reboot T o reboot the router , click on Reboot, and you will be prompted: Click OK to continue or Cancel to exit. 3.5.6 Miscellaneous[...]

  • Página 94

    90 Parameter Description MAC Address for W ake-on-LAN W ake-on-LAN is a technology that enab les you to power up a networked device re motely . In order to use this feature, the targ et device must be W ake-on-LAN ena bled and you have to know the MAC address of this device. Enter the MAC add ress of the device and click W ake Up . The router will [...]

  • Página 95

    91 Chapter 4 S t atus The Status section allows you to monitor the current status of your router. You can use the Status page to monitor: the Internet connection, Wi reless, NAT status, and the statistics information of the Router.[...]

  • Página 96

    92 4.1 System S tatus Y ou can view the status of current Internet connection. By clicking Renew and Releas e, you can renew and release the W AN IP addre ss obtained from the ISP (Internet Service Provider). 4.2 Wireless S tatus Y ou can view the Wireless LAN status of yo ur router , including SSID (the name of your wireless network), Channel numb[...]

  • Página 97

    93 4.3 S tatistics Information Y ou can view the statistics information of your router , including inbound and outbound packet s. 4.4 NA T S tatus Click NA T S tatus on the bottom of the S tatus page to view NA T S tatus.[...]

  • Página 98

    94 Chapter 5 Appendix 5.1 Hardware Specification St andards • IEEE 802.1 1b / g / n • IEEE 802.3, 802.3u, 802.3ab Port s • 1 x Gigabit W AN port • 4 x Gigabit LAN port Antenna type • T wo 3dBi detachable dipole antennas Operation Modes • AP • WDS Bridge • AP+WDS Bridge Security • WEP 64/128-bit • WP A2-PSK, WP A-PSK • Radius S[...]

  • Página 99

    95 T echnical Support E-mail: support@airlink101.com T oll Free: 1-888-746-3238 Website: www .air link101.com *Theoretical maximum wireless signal rate derived from IEEE standard 802.11 spec ifications. Actual data throughput will vary. Network conditio ns and environmental factors, including volume of network traffic, building materials and constr[...]