ZyXEL IES-1248-51A ADSL 2+ Bedienungsanleitung

IES1248 Support Notes March 2006[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 2 Index Application Notes .............................................................................................................. .............. 4 Provide Different DSL Port S peed s to differe nt subscribers ....................................... [...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 3 What is the default consol e rate of I ES1248 ? ......................................................... 81 How many static VLAN entri es can IES124 8 support ? ........................................... 81 How many VLANs can each ADSL port of IES 1248[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 4 Application Notes Provide Different DSL Port Sp eeds to different subscribers An ISP may provide different L ine speeds for each DSL port. In our IES-1248 have an easy way to configure the line speed for each port. It can create some profiles which can s[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 5 Set up Low Speed Profile. Give this prof ile a name like Profile_LowSpeed and input the MaxRate for Up S tream and Down S t ream. In this case, we set 512Kbps and 2048Kbps for Up S tream and Down Stream . Set up High Speed Profile. Give this profile a na[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 6 1.2 Profile Assignment Click Basic Setting , xDSL Port Setup in the navigation p anel to display configuratio n screen as shown. Assign Profile_LowSpeed to port 1. Click a number 1 in the Port index field to enter Port setup screen. Select the Pr ofile_L[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 7 combobox. Check the Active and Pr ofile&Mode . After press the Paste button. It will pop up a screen to select the ports. Select the ports you want to copy the configuration to and press Apply button. The settings of port 1 will be copied to other po[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 8 2. Prestige 660R-61 Settings We configure Prestige 660R-61 as br idge mode. The default VPI/VCI of IES-1248 is 0/33. So we need to set up such values. Prestige 660R-61 has a T elnet server inside. We need to configure it via T elnet. 2.1 Menu1: General S[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 9 2.3 Menu1 1.1: Remote Node Profile In menu1 1.1, we should activate this profile with “Active= Y es”. The Encapsulation and the Multiplexing are the same as the m enu 4. Setting “Edit A TM Options=Y es” will enter Menu 1 1.6. 2.4 Menu1 1.6: Remot[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 10 Y ou can click Basic Setting and xDSL Line Data in navigation Panel to display configuration screen as shown. Select th e port co nnected to the IES-1248. Y ou will see the link speed and link mode. How to configure 802.1Q VLAN A VLAN (V irtual Area Net[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 11 and belong to dif ferent VLAN. One is VLAN 10 and the other is VLAN 20. So they can’t communication with each o ther . But both PC 1 and PC 2 can c onnect to Internet. How to set up a VLAN environment. In this application, we need to confi gure IES1-1[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 12 Add VLAN20. Assign Port 2, ENET1 and ENET2 to be members of VLAN20 as shown. Add VLAN200. Assign Port 1, Port2, EN ET1 and ENET2 to be members of VLAN200 as shown.[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 13 1.2 PVID settings After set up the three VLAN, we can s ee Vlan10, Vlan20 and Vlan200 as shown. No w , click VLAN Port Setting to set the PVID. W e assign VLAN 200(PVID) to ENET1, ENET2. Also, we assign VLAN 10 and VLAN 20 to Port1 and port2, respective[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 14 1.3 Port Isolation If we just want to isolate ports of IES- 1248 and don’t want to set any VLAN, there is another easy way to do this. Click Basic setting , Switch Setup in navigation panel to display configuration screen as shown. Check Port isolatio[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 15 In this application, we demonstrate how to set u p the multiple PVCs environment. From the figure below , the PC wants to access the two kinds of network services. One is the Internet servi ce (data service) and th e other is V ideo service. Because we [...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 16 Add VLAN20. Assign Port 1, ENET1 to be members of VLAN20 as show . W e need to check the Tx T agging on ENET1. 1.2 VC profile setup Click Basic Setting and xDSL Profile Setup in navigation panel to display the configuration screen as shown. C lick VC pr[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 17 Add Defval_CBR VC profile. Set up Encap, Class, PCR and CDVT as shown. Encap should be LLC the same as IES-1248. Class should be CBR which has higher priority in A TM QoS. 1.3 Multiple PVCs setup Click Basic Setting and xDSL Port Setup in navigation pan[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 18 W e hope VPI/VCI with 0/33 get the higher pr iority . W e should modify this VPI/VCI with Defval_CBR profile which we created before. Press Apply button to make it take ef fect. Then we add the VPI/VCI with 0/34. W e a pply the DEFV AL profile to this c[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 19 application, we already knew how to set up CPE with one channel (0/33). We just demonstrate how to set up second channel. 2.1 Menu1 1.1: Remote Node Profile In menu1 1.1, we should activate this profile with “Active= Y es”. The Encapsulation and the[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 20 Add VLAN10. Assign Port 1, Port 10 to be members of VLAN10 as show . W e need to check the Tx T agging on Port 10.[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 21 Add VLAN20. Assign Port 2, Port 10 to be members of VLAN20 as show . W e need to check the Tx T agging on Port 10. 3.2 PVID setup Click Advanced Application and VLAN in navigation panel t o display configuration screen as shown. Click VLAN Port Setting [...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 22 Let 10 be the PVID of Port 1 and 20 be the PVID of Port 2. In this application, you will see the video traf fic will go via 0/33 and dat a traffic[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 23 will go via 0/34. And the 0/33 get the higher priority . The video traffic wil l go first when the two traffics arrive at the same time. 802.1x Application IEEE 802.1x port-based authentication is desi red to prevent unauthorized ports (clients) from ga[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 24 environment. The Microsoft 802.1x client and ZyXEL V antage 50 will be used as supplication and RADIUS, respectively . Following sections will descr ibe the detailed procedure to set up the environment. 1. IES-1248 (Authenticator) settings: 1.1 RADIUS s[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 25 2. V antage 50(RADIUS) settings: We use V antage 50 as the RADIUS server . It’s a one of ZyXEL ’s product. Of course, you can use other RADIUS se rver like Funk S t eel-Belted RADIUS, Cisco Access Control Server , MeetingH ouse Aegis server and so o[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 26 3. W indows XP(Supplicant) settings: There are many supplicants we can c hoose like MeetingHouse Aegis client, Funk Odyssey client and Microsoft 802.1x client. W e take Microsoft 802.1x client as an example here. 3.1 802.1x/MD5-challenge setup Open the [...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 27 After click the icon, there will be a dialog for entering the user name and p assword. Click ok after input the correct user name and password that are in the dat abase of authentication server . The settings of client site are finished.[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 28 After above procedure, we can allow the authenticated port the access the server . If the DSL port doesn’t be authenticated, the PCs behind the port can’t access the network. 4. Prestige 660R-61 Settings Please refer to the procedures in previous ap[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 29 Double Click the Kiwi’ s Syslog Server installi ng program. It is very easy to install it. After finishing the installation, you can r un it from the S t art Menu. And you will see following dialog. And the Server ’ s IP is 192.168.1.77. 2. IES-1248[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 30 When DSL ports are linked up/down, IES-1248 sends a record to Syslog server . W e can see these logs in Kiwi’ s Syslog server . Setting up the Ring Environment The Ring topology is used to guarantee the network being norm al even if one link between t[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 31 How to set up a Ring Environment. W e set up Ring environment with one IES1248, one IES2000 and one ES4024. A PC behind IES can connect the PC in the ne twork even one of the links broken. Following sections will describe the detailed procedures to set [...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 32 Click Active to enable Spanning T ree Protocol. Then enable it on ENET1 port and ENET2 port. 2. Setup IES2000 2.1 Enable Spanning T ree protocol Click Switch Setup in the navigation p anel to display configuration screen as shown. Then check Sp anning T[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 33 2.2 Enable Spanning T ree protocol on Ethernet ports Click Port Setup in the navigation p anel to display configuration screen as shown. Click msc to display MSC card Port setup. Click Uplink2 to set up this port.[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 34 Check Sp anning T ree Protocol to enable it. T ake the same procedures with Up link1. Please see the following figure.[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 35 3. Setup ES4024 3.1 Enable Spanning T ree protocol on Ethernet ports Click Advanced Application , S p anning T ree Protocol in the navigation p anel to display configuration screen as shown. Y ou will see the Sp anning T ree Protocol St atus page. Click[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 36 4. Results W e can see the link between port 2 of ES4024 and Uplink1 of IES2000 will be blocked as shown after we connect. After we remove the cable between por t 1 of IES1248 and port 1 of ES4024, the connection still exists. W e can remove any one of [...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 37 Setting up the IGMP Snooping/IGMP Filtering W ithout IGMP snooping multicast traf fic is treated in the same manner as broadcast traf fic, that is, it is forwarded to all po rt. W ith IGMP snoopin g, multicast traf fic of a group is only forwarded to po[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 38 How to set up IGMP snooping/IGMP filtering Here, we only set up the IES1248 to support IGMP snooping and IGMP filtering. Please refer to the user guide of the V ideo Server and the subscriber device. W e assume the video server provides three channels, [...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 39 1.2 Set up IGMP Filtering If we don’t set up IGMP filtering, the subscrib er will receive all the movies. W e set up a IGMP filter Profile and apply it to speci fic port to limit the channels subscriber can see. Click Basic Setting , xDSL Profiles Set[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 40 W e select the Subscriber1 in IGMP Filter Pr ofile Combobox. And click Apply to let the setting take ef fect. Go back to check the IGMP Snooping table. W e will see only two channels allowed to be forwarded to port 1. S t atic Multicast What is S tatic [...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 41 224.0.0.2---------all router s on this subnet 224.0.0.5---------all routers running OSPF 224.0.0.6---------all Designed Routers running OSPF 224.0.0.9---------for RIPv2 224.0.1.1---------for NTP Before using static multicast f ilter , you must mapping M[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 42 An ISP wants to provide multicast video se rvice to end user and subscribes who with dif ferent pay enjoy dif ferent programs. Client A (connect to ADSL port 1) is a normal subscribe, so he has no authority to access movie resource. Client B (connect to[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 43 2. Please key in “01:00:5e:00:00:01” in the “Adding new entry” and click “Add” to bring up the following screen. “ V” displays for member and “-” displays for non-member . 3. Please do the same step to add “01:00: 5e:00:00:02” st[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 44 4. Please add channel 1 multicast MA C address “01:00:5e:01:01:01” and channel 2 multicast MAC address “0 1:00:5e:02:02:02” as above. 5. Because port 1 is not member of both 2 channels, so it should be set as non-member of these 2 channels. Plea[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 45 6. For port 2, set it as non-member of channel 2 “01:00:5e:02:02:02” 7. For port 3, no need to change anything because its status as m ember of these channels by default. Don’t for get to clic k “Config Save” to sa ve your configuration into f[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 46 MAC address on specified ADSL ports, a range of ADSL ports or all ports, delete <multicast MAC> Remove a static multicast filter entry by deleting the associated MAC address. How to achieve the same goal by CLI command? >switch smcast set 1,2,3[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 47 How to set up MAC Filter/Port Security Here, we will set up an environment to allow PCs with certain MAC address and the number of PCs behind port 3 to access the Intern et. 1. IES-1248 settings 1.1 Set up MAC filter Click Advanced Application , MAC Fil[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 48 Y ou will see the MAC address in the MAC field. Then check the Active check box of Port 3 and press Apply button to enable this feature. Only th e MAC addresses listed here can access the Intern et behind certain ports. 1.2 Set up Port Security Click Ad[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 49 Click Management , MAC T able in the navigation panel to display configuration screen as shown. And select port 3. Y ou w ill see the MAC table will be shown as you configured in previous steps. DHCP Relay Option 82 Application ISP may want to limit the[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 50 How to set up DHCP Relay Option 82 Environment Here, we will set up an environment to allow a PC get DHCP IP address in specific IP pool according to its DSL port, VLAN ID and the option 82 string. In th is case, the PC is behind 25 th DSL port and the [...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 51 2. CPE settings Connect CPE to the 25 th DSL port. Please see former applications for Detailed settings. 3. IP Commander settings Open IP Commander . Right click “IP commander and then click “ connect new server ”.[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 52 Input the DHCP IP address or domain na me and click “ok”. Our IP is 192.168.1.99. Input user name and password. The defau lt user name is “administrator” and password is “incognito”.[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 53 It will bring up the following screen, pleas e make sure that your DHCP is in “ online ” status. Then click “ wizar d ” in the top tool bars and select “ rule wizard ”.[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 54 Give a name and description to the new rule. Assign a range of IP addresses or just one IP address to this rule . In our case, we set the IP pool from 192.168.1.201 to 192.168.1.203.[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 55 After input IP pool, we select “ DHCP Option” in Keywords combobox. After select the “DHCP Option”, it will pop up “Add DHCP Option Rule” dialog.[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 56 Select “option 82 Relay Agent Informati on”, sub-option 1, binary data. For port 25, VLAN 1, “1248”, please key in “0019000131323438” as the key value and click OK. Please note that the first 2 bytes define port number , the second 2 bytes i[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 57 Then pop up the following screen and you can just press Next button. Then you can add DHCP template (option) su ch as gateway , DNS server and so on.[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 58 Here we use “192.168.1.1” as gateway IP address of DHCP client PC. Y ou can apply DDNS service to DHCP server or not.[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 59 The rule creation has been finished.[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 60 After finishing all above procedures, your PC will get the IP address 192.168.1.201 when you send a DHCP request. Filter Some Cert ain Packet ISP may want to filter some kinds of packets. IES-1248 provides “Packet Filter” function to filter some spe[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 61 Please select port 1 and clear the NetBios check box. Meanwhile, you will see Filter Out in NetBios check box. Press Add button make the change take ef fect. So you will see the port 1 will bloc k the NetBios protocol packets.[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 62 Cascade two IES1248 (Daisy chain mode) Y ou know , the IES1248 is a remote mini-DSL AM. Wh en the subscriber number is increased, ISPs may cascade or daisy-chain the more then one IES1248 to extend the port number . They can daisy-chain up to three IES1[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 63 VLAN Application Application Scenario A: Scenario Description In this scenario, each building has 2 de partments, and users belong to the same[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 64 department could communicate with each othe r , but communication between dif ferent departments is forbidden for s ecurity and confidential reason. PCs from Sales department (VLAN 10) connected to Port 1, 2, 3 of both switches while Finance department [...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 65 3. Please click VLAN port setting to bring up the following screen, setup PVID 10 for port 1, port 2, port 3; PVID 20 for port 4,port 5, port 6. Application Scenario B:[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 66 Scenario Description: In this scenario, PCs belong to dif feren t divisions within a single corporation can not communicate with each other , and we lef t some ports of switches are for GVRP-aware PC and others are for VLAN- unaware PC. So network admin[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 67 Add VLAN 20 to this switch, VLAN 20: port 4, fixed, unt ag; port 23, fixed, Tx tagging. Please click VLAN port setting to br ing up the following screen, setup PVID 10 for port 3, PVID 20 for port 4 , and enable GVRP on the top of the screen and port 1,[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 68 2. For Switch B on Floor 1: Please follow the same steps to adding VLAN 10: port 3, fixed, untag; port 23, fixed, Tx tagging; port 24, fixed, Tx tagging”. Add VLAN 20 to this switch, VLAN 20: port 4, fixed, unt ag; port 23, fixed, Tx tagging; port 24,[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 69 Please click VLAN port setting to br ing up the following screen, setup PVID 10 for port 3, PVID 20 for port 4, and en able GVRP on the top of the screen and port 1, port 2, port 23, port 24. 3. For Switch C on Basement: Please set static VLAN 10: port [...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 70 Please set static VLAN 20: port 23, fixed, untag . Please add VLAN 30: port 1, fixed, untag; port23, fixed, untag; port 24, fixed, Tx tagging.[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 71 Please setup PVID 30 for port 1 and enable GVRP on port 3 and port 24. Application Scenario C:[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 72 Scenario Description: Scenario C is for all clients can su rf Internet or public resource when dividing multiple subnets for the same structu re from scenario B. In this scenario, there are 3 subnets match to 3 VLANs to let netw ork administrator manage[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 73 Add VLAN 20 to this switch, VLAN 20: port 4, fixed, unt ag; port 23, fixed, Tx tagging. Please click VLAN port setting to br ing up the following screen, setup PVID 10 for port 3, PVID 20 for port 4 , and enable GVRP on the top of the screen and port 1,[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 74 2. For Switch B on Floor 1: Please follow the same steps to adding VLAN 10: port 3, fixed, untag; port 23, fixed, Tx tagging; port 24, fixed, Tx tagging”. Add VLAN 20 to this switch, VLAN 20: port 4, fixed, unt ag; port 23, fixed, Tx tagging; port 24,[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 75 Please click VLAN port setting to bring up the following screen, setup PVID 10 for port 3, PVID 20 for port 4, and en able GVRP on the top of the screen and port 1, port2, port 23, port 24. 2. For Switch C (layer 3 switch) on Basement: Please add VLAN 3[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 76 Please setup PVID 30 for port 1 and enable GVRP on port 3 and port 24. Please click “IP setup”, then setup 4 domains on ES4024/GS4024: Index IP address IP Subnet mask VLAN ID 1 192.168.1.0 255.255.255.0 10 2 192.168.2.0 255.255.255.0 20 3 192.168.3.[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 77 After finish domain setting, please cha nge the default gateway and domain name server setting and click “Apply”. Please click “Filtering” u nder “Advanced Application” menu list to bring up the following screen and add 3 filter rule s to bl[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 78 Y ou will see the following screen afte r finish filtering setting.[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 79 Advise: 1. Please also configure routing protocol to make layer 3 Switch and gateway exchange their routing info rmation in this scenario. 2. Y ou can also enable DHCP feature based on VID on layer 3 Switch (ES4024/GS4024), which will help you to dynami[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 80 FA Q What is the maximum line rate of IES1248 ? It can support ADSL2+, so line rate can reach to 1.2Mbps in upstream direction and 25 Mbps in downstream in a short distance. How many management inst ances can access IES-1248 at the same time? Only one c[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 81 What kind of the features that IES 1248 support s ? • RFC 2684 Bridge Mode (Replace RFC 1483) • IEEE 802.1Q • VLAN accept able frame type filter • IGMPv2 Snooping • A TM QoS (UBR, CBR, VBR) per PVC • DHCP Rela y Agent Information Option 82. [...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 82 ¾ IP ROUTE: 128 ¾ S tatic multicast address: 32 ¾ Igmp groups: 512 groups ¾ MAC learning: 14k (128 per ADSL port, 4k per E NET port) ¾ RPVC gateway IP address: 96[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 83 T rouble Shooting If my computer can’t access the DSLAM by WEB/T elnet/Ping from Ethernet port, only console screen can access successfully , what can I do? 1. Make sure that the Ethernet port has the appro priate speed mode setting. 2. Please check t[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 84 Please key in “sys server show” to check se rver port, make sure that your application follow the server port in the list sho wn. 5. Please check VLAN configuration, make sure that traf fic from outside is tagged or[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 85 will be added with CPU VLAN ID when access the IES. 6. please check your topology if you are not connect PC or device to IES directly . If DHCP Relay Option 82 can’t wo rk, for example, PC can not get desired IP address from DHCP server , what can I d[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 86 Press Browse button to select the defau lt rom file. Then press “Upload” button. b) IES2000/3000 Upload default rom file to IES2000/3000 by ftp, web or console Console: When the system reboots, press any key within 3 seconds to enter debug mode.[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 87 Suggest changing it to 1 15,200 temporarily to speed up speed by “atba5” command. T ake “atlc” command to restore th e default configuration file. When you see “cccc…”, please send the default rom file to MSC via 1k-Xmodem or Xmodem. See f[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 88 WEB: Please open Maintenance page. Clic k “Restore Configuration” link. Press Browse button to select the default rom file. Then press the “Restore” button. ftp:[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 89 Please ftp into the DSLAM. Replace the rom-0 with the default rom file by put command. c) IES1248 Y ou can set the factory default by CLI command or W EB WEB: Please open Maintenance Page. Click the “Restore Default Configuration” link. It will pop [...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 90 restoring. xDSL link fail? 1. Check if the DSL port is enabled. 2. Check if the cable is plugged well. 3. For ADSL, check the ADSL modem and line card are in the same mode (Annex A or Annex B). 4. For G .SHDSL, check the modem and lin e card use the sam[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 91 I forgot the Password, how do I recover it? a.) IES-1000 Please use the BOOTP/TFTP and bin file to recover the confi guration to factory default. Please refer to IES-1000's user ma nual to see the recove ry procedure within Chapter 36.2 'BOOTP[...]

IES 1248 Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 92 null-modem cable. 3. Check if the Console is damaged; if possi ble, try to change another one to give a try . 4. T ry to use the other T erminal software tool to see if it’ s a T erminal software issue. There is no traffic could be transmitted through[...]