Zebra Technologies 3ULQWHUV Bedienungsanleitung

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168

Zur Seite of

Richtige Gebrauchsanleitung

Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung Zebra Technologies 3ULQWHUV an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von Zebra Technologies 3ULQWHUV, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.

Was ist eine Gebrauchsanleitung?

Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung Zebra Technologies 3ULQWHUV die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.

Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung Zebra Technologies 3ULQWHUV. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.

Was sollte also eine ideale Gebrauchsanleitung beinhalten?

Die Gebrauchsanleitung Zebra Technologies 3ULQWHUV sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts Zebra Technologies 3ULQWHUV
- Den Namen des Produzenten und das Produktionsjahr des Geräts Zebra Technologies 3ULQWHUV
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts Zebra Technologies 3ULQWHUV
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen

Warum lesen wir keine Gebrauchsanleitungen?

Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von Zebra Technologies 3ULQWHUV zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von Zebra Technologies 3ULQWHUV und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service Zebra Technologies finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von Zebra Technologies 3ULQWHUV zu überspringen, wie es bei der Papierform passiert.

Warum sollte man Gebrauchsanleitungen lesen?

In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts Zebra Technologies 3ULQWHUV, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.

Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von Zebra Technologies 3ULQWHUV widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.

Inhaltsverzeichnis der Gebrauchsanleitungen

  • Seite 1

     =H EU D Xi III Plus ™ 3ULQWHU V Users Guide[...]

  • Seite 2

    Copyright ©2003 ZIH Corp. This copyrighted guide and the label pr inters described herein are owned by Zebra T echnologies. All rights are reserved. Unauthorized r eproduction of the guide or the software in the label printer may result in imprisonment of up to one year and fines of up to $10,000 ( 17 U.S.C.506). Copyright violators may be subject[...]

  • Seite 3

    Zebra Xi III Plus Users Guide 3URSUL HWDU6W DWHPHQ W This guide contains proprieta ry information of Zebra T echnologies. It is intended solely for the information and use of part ies operating and maintaining the equipment described herein. Such proprietar y info rmation may not be used, reproduced, or disclosed to any other parties for any ot[...]

  • Seite 4

    Zebra Xi III Plus Users Guide Proprie t ary St atement Connect the equipment into an outlet on a circuit dif ferent than that to which the receiver is connected. Consult the dealer or an experienced Radio/TV technician for help. &DQDGLDQ' 2&&RPSOLDQFH6WDWHPHQW This digital apparatus does not exceed th e Class A limits for [...]

  • Seite 5

    Declaration of Conformity Zebra Xi III Plus Users Guid e 'HFO DUDWLRQR I&RQIRUPLW I have determined that the Zebra printers identified as the manufactured by: Have been shown to comply with the applicable technical standards of the FCC If no unauthorized changed is made in the equipment, and if the equipment is properly maintained a[...]

  • Seite 6

    Zebra Xi III Plus Users Guide Declaration of Conformity[...]

  • Seite 7

    Zebra Xi III Plus Users Guide :DUU DQW,QIRUPD WLRQ (IIHFWLY H'HFHP EHU  All new Zebra products are wa rranted by the manufacturer to be fre e from defec t in material and workmanship. 3ULQWHUVDQG5 HODWHG+ DUGZDUH3URG XFWV Proof of purchase or shipment date is re quired to validate the warr anty [...]

  • Seite 8

    Zebra Xi III Plus Users Guide W arran ty Infor mation 3ULQWK HDGV  Since printhead wear is part of normal opera tion, the original printhead is covered by a limited warran ty as indicated below . W arr a nty period begins on purc hase date. T o qualify for this warranty , the printhead mu st be returned to the fa ctory or to an authorized servic[...]

  • Seite 9

    W arranty Inf ormation Zebra Xi III Plus Users Guide Defective product must be returned to Zebra for eva luation. In the event of notification of defect within the warranty per iod, Zebr a will replace the defective item provided there had not been damage resulting fr om user abuse, modification, improper installation or use, or damage in shipping [...]

  • Seite 10

    Zebra Xi III Plus Users Guide W arran ty Infor mation and questions, Zebra does not assume responsibility for any specific application to which any Products are applied, including, but not limit ed t o, co mpat ibili ty with ot her equipment. All statements, technical information, or recommendations relating to Zebra Products are based on te sts be[...]

  • Seite 11

    Zebra Xi III Plus Users Guide i 7DEOHRI&RQWHQWV Proprietary State ment Declaration of Confor mity Warranty In formation Prefa c e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

  • Seite 12

    ii Zebra Xi III Plus Users Guide T able of Content s 2 • Printer Setu p and Calibratio n . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Before Y ou Beg in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Load th e Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

  • Seite 13

    T able of Contents Zebra Xi III Plus Users Guide iii General S pecifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 Print S peci fications by Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 Ribbon S pecification s by Model . . . . . . . . . . . . . . . . . . . . . . . . [...]

  • Seite 14

    iv Zebra Xi III Plus Users Guide T able of Content s[...]

  • Seite 15

    Zebra Xi III Plus Users Guide v 3UHIDFH This users guide provides all the info rmation you need to operate the Zebra Xi III Plus printer . Content s Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi About this Docu ment . . . . . . . . . . . . . . . . . . . . vii Document Conv en tio ns . . . . . . . . . . . . . . . . . vi ii Re[...]

  • Seite 16

    vi Zebra Xi III Plus Users Guid e Prefac e Contacts &RQWDFWV Y ou can contact Zebra T echnologies at any of the following: Visit us at: www .zebra.com Our M ailin g A ddresse s: =HEUD7 HFKQRORJLHV  333 Corporate W oods Parkway V ernon Hills, Illinois 60061.3109 U.S.A T elephone: +1 847.634.6700 Fax: +1 847.913.8766 =HEUD7 HFKQRORJLHV ?[...]

  • Seite 17

    Prefac e About this Docu men t Zebra Xi III Plus Users Guide vii $ERXWWK LV'RFXPHQW The Zebra Xi III Plus Users Guide contains these chapters a nd appendices: &K 1R 7LW OH &RQWH QW W arranty Information W arranty information on Zebra printers, re lated hardware, and supplies. 1 Intr oduction Unpack and inspect your pr[...]

  • Seite 18

    viii Zebra Xi III Plus Us ers Guide Prefac e Document C onven tions 'RF XPHQW&RQ YHQW LRQV The following conventions are used throughout this document to convey certain information: About this Chapter Sections This section list s and describe s each main section of the chapter , including the initial page number of that section. These s[...]

  • Seite 19

    Prefac e Doc um ent C onven tion s Zebra Xi III Plus Users Guide ix Illustration Callout Instruction Illustration callout instructions are used when an illustration contains either information about a dialog box or step(s) to a ccomplish in a dialog box. Note • Indicates neutral or positive information that emphasizes or supplements important poi[...]

  • Seite 20

    x Zebra Xi III Plus Users Guide Prefac e Related Doc uments 5HODWHG'RFXPHQW V In addition to the Zebra Xi III Plus Users Guide, the following documents might be helpful references :  ZPL II ® Progr amming Guide V olume I (part number 45541L) and Vo l u m e I I (part number 45542L).  PrintServer II ™ Installation and Users Guide (pa[...]

  • Seite 21

    Zebra Xi III Plus Users Guide 1 C HAPTE R 1 ,QWURGXFWLRQ This chapter gives you an overview of the Xi II I Plus printer . Content s Unpack and In spect the Printer . . . . . . . . . . . . . 2 Printer Overvi ew . . . . . . . . . . . . . . . . . . . . . . . . 3 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . 5[...]

  • Seite 22

    2 Zebra Xi III Plus Users Guide Introduction Unpack and In spect the Printer 8QSDFNDQG,QVSHFWWKH3ULQWHU Make sure the printer is in good condition when you receive it. The instructions below outline what you need to do. ,QVSHFWWKH3ULQWHU Use this list as a guide to inspect the printer .  Check all exterior surfaces.  Rais[...]

  • Seite 23

    Introduction Prin ter Over view Zebra Xi III Plus Users Guide 3 3ULQWHU2Y HUYLHZ The printer controls are on the front pane l. These controls are used to change print settings as needed for your application. This illustra tion shows the printer ’ s front panel. The numbere d callouts are described in the table that follows the illustration. &a[...]

  • Seite 24

    4 Zebra Xi III Plus Users Guide Introduction Printer Overvi ew  Right oval increases values, answers <(6 , indicates 21 , or moves to the next selection.  PREVIOUS goes back one step.  NEXT/SA VE moves one step or saves settings if used a fter SETUP/EX IT .  SETUP/EXIT enters or leaves menu f rom the PRINTER READY display .  Power[...]

  • Seite 25

    Introduction Components Zebra Xi III Plus Users Guide 5 &RPSRQHQWV This illustration sho ws the side view of your prin ter . The callouts are identified in t he table that follows. ! Import ant • Depending on the printer options you have selected, your printer may look slightly dif ferent. For more about printer options, go [...]

  • Seite 26

    6 Zebra Xi III Plus Users Guide Introduction Components 3ULQWHU2SWLRQV Y our printer can have options including:  Rewind Spindle  Peel (T ake Label) Sensors  Cutter These options change the way your ribbon and labels are loade d. For more information, see Labels and Print Modes on page 23 . &DOOR XW 'HV FUL S WL RQ  Printhea[...]

  • Seite 27

    Introduction Components Zebra Xi III Plus Users Guide 7 6WD QGD U G, QWHU ID FHV St andard c ommunication interface s are:  RS-232 serial data port  Bi-direc tional parallel port  USB 2.0 port (USB 1.0- and 1.1-compatible). For more information on the standard communication interfaces, see S tandar d Ports on page 38 . 2SWLR QDO, QWH[...]

  • Seite 28

    8 Zebra Xi III Plus Users Guide Introduction Components This illustra tion and the callout table that follows it identi fy the parts of the power cord. See Power Cor d Specifications on page 1 10 for cert ification informati on. &DOOR XW 'HV FUL S WL RQ  AC power plug for your country  3-conductor cable  IEC 320 connector  Neut[...]

  • Seite 29

    Zebra Xi III Plus Users Guide 9 C HAPTE R 2 3ULQWHU6HWXSDQG&DOLEUDWLR Q This chapter gives you step-by-step instru ctions to set up your printer and print a calibration label. Content s Before Y ou B egin . . . . . . . . . . . . . . . . . . . . . . . 1 0 Load the P rinter . . . . . . . . . . . . . . . . . . . . . . 10 Sensor Adju st[...]

  • Seite 30

    10 Zebra Xi III Plus Users Guide Printer Setup and Calibration Before Y ou B egin %HIRUH<R X%HJLQ Review this checklist before you begin loading your Zebra Xi II I Plus printer .  Labels Do you have the correct labels for your application? If you are not sure, see T ypes of Labels on page 24 .  Ribbon Do you need ribbon? /RD GW KH[...]

  • Seite 31

    Printe r Setup and Ca libration Before Y ou Begin Zebra Xi III Plus Users Guide 11 7RO RD GW K HOD EHOV  FR PS OH WH WKHV H VW HSV  1. Open the printhead. This illustra tion calls out the parts of the printer used when loading the labels. 2. Slide the media guide away from the printer frame. Y ou may need to loosen the media[...]

  • Seite 32

    12 Zebra Xi III Plus Users Guide Printer Setup and Calibration Before Y ou B egin The illustrati on below shows labels l oaded in the prnter . The callouts show the l abels and the parts of the printer described in the instructions. 5. Feed the labels under the media guide roller and unde r the printhead. 6. Adjust the media supply guide so it is j[...]

  • Seite 33

    Printe r Setup and Ca libration Before Y ou Begin Zebra Xi III Plus Users Guide 13 7. Are you using direct thermal labels? • If yes, close the printhead and go to T o print a configuration label, complete these steps: on page 18 . • If no, go to T o make a ribbon leader , complete these steps: on page 13 . 7RPDNHD ULEERQOH DGHU?[...]

  • Seite 34

    14 Zebra Xi III Plus Users Guide Printer Setup and Calibration Before Y ou B egin This acts as a ribbon leader . 7RORDG WKHULEE RQFR PSOHWHWKHVHVWH SV 1. Put the roll of ribbon on the ribbon spindle and push the core as far as it will go, until it is against the stop on the ribbon supply spi ndle. The callouts in the illustr[...]

  • Seite 35

    Printe r Setup and Ca libration Before Y ou Begin Zebra Xi III Plus Users Guide 15 2. Pull the ribbon leader up over the top roller , above the printhead. The callouts in the illustration and the table that f ollows show you the ribbon path. 3 T op roller 4 R ibbon takeup spindle &DOO RXW 'HVFULSWLRQ  Ribbon leader  T op roller  P[...]

  • Seite 36

    16 Zebra Xi III Plus Users Guide Printer Setup and Calibration Before Y ou B egin 3. Bring the leader and ribbon under the ribbon takeup spindle. W rap the leader and ribbon around the spindle. T urn the spindle several times until the ribbon stays on the spindle. The callouts in the illustration below and the table that follows show the ribbon lea[...]

  • Seite 37

    Printe r Setup and Ca libration Before Y ou Begin Zebra Xi III Plus Users Guide 17 4. Close the printhead. The callouts in the illustration below and the table that follows show ribbon and labels loade d in the printer . &DOOR XW 'HVFULSWLRQ  Printhead lever in closed position  Ribbon  Lab els   [...]

  • Seite 38

    18 Zebra Xi III Plus Users Guide Printer Setup and Calibration Before Y ou B egin 7RSULQWDFRQILJX UDWLRQODEHOFRPSOH WHWKHVHVWH SV 1. Connect the power cord to the printer . The power connection is at the back of the printer . 2. T o confirm the power connection, turn the printer On ( I ). 3. If 35,17(5 5($'< ?[...]

  • Seite 39

    Printe r Setup and Ca libration Before Y ou Begin Zebra Xi III Plus Users Guide 19 The configuration label prints. 7. Did the labe l print? • Ye s , a c onfiguration label printed. Conne ct the printer to your computer system. Communication can be handled in many dif ferent ways. More information about the standard interface s is available in S t[...]

  • Seite 40

    20 Zebra Xi III Plus Users Guide Printer Setup and Calibration Before Y ou B egin • No , a label did not print. Sensors out of position is a common cause of pr inting problems. 6HQVRU$GMXVWPHQW Adjust sensors only when the printer cannot detect the top of the label. The fr ont panel LCD displays (5525 &21',7,21  3$3( 5 28 7 ,[...]

  • Seite 41

    Printe r Setup and Ca libration Before Y ou Begin Zebra Xi III Plus Users Guide 21 7RDGM XVWWK HXSS HUDQ GORZHU PHGLD VHQVR UVFR PSOHWH WKHV H VWHSV 1. Remove the ribbon (if ribbon is used). 2. Locate the upper media sensor . The upper media sensor eye is directly below the adjustment screw head. See the illus tr[...]

  • Seite 42

    22 Zebra Xi III Plus Users Guide Printer Setup and Calibration Before Y ou B egin  The callout in th e illustration below and t he table that follows show the lower medi a sensor . 6. Position the lower media sensor by sliding it in its slot unt il it is directly under the upper media sensor 7RDGMXVWWKHEODFNPDUNVHQV RU The black m[...]

  • Seite 43

    Zebra Xi III Plus Users Guide 23 C HAPTE R 3 /DEHOVDQG3ULQW0RGHV This chapter tells you about the label and print mode setups you can use. Content s Label T ypes . . . . . . . . . . . . . . . . . . . . . . . . . . 2 4 Print M ode Choic es . . . . . . . . . . . . . . . . . . . . . 2 6[...]

  • Seite 44

    24 Zebra Xi III Plus Users Guide Labels and Print Modes Label T ypes /DEHO 7S HV  Set up the printer to match the label, ri bbon, and printer options you have chosen. If your label style or your printer options were different from those shown in T o load the labels, complete these steps: on page 1 1 , review the label styles and print modes [...]

  • Seite 45

    Labels and Print Modes Label T ypes Zebra Xi III Plus Users Guide 25 Non-Continuous Blac k Mark labels Non-continuous black mark labels have black marks printed on the back of the liner ma terial that indicate the start and end of each label. Shown in this illustration are examples of black marks. Continuous labels Continuous labels form an uninter[...]

  • Seite 46

    26 Zebra Xi III Plus Users Guide Labels and Print Modes Print M ode Choic es 3ULQW0R GH&KRLFHV The options on your printer may le t you set up additional print modes. See Fr ont Panel Contr ols on page 54 to set up the printer f ront panel controls to match the print mode you are using. 7HDU 2I I0 RGH  See Load the Printer on pag[...]

  • Seite 47

    Labels and Print Modes Prin t Mode Choi ces Zebra Xi III Plus Users Guide 27 The callouts in the illustration and the foll owing table identify the parts of the printer and rewind plate. 2. Position the rewind plate so the lip on the attached hook plate points down. 3. Insert the hook plate lip a shor t distance (1/2 in. or 13 mm) into the lower op[...]

  • Seite 48

    28 Zebra Xi III Plus Users Guide Labels and Print Modes Print M ode Choic es 8. Load labe ls as shown in Load the Printer on page 10 . 9. When loa ding labels, allow approximate ly 36 in. (915 mm) of labels to extend past the printhead. Remove all labels from this portion to create a leader . 10. Remove the hook from the rewind spindle. If you are [...]

  • Seite 49

    Labels and Print Modes Prin t Mode Choi ces Zebra Xi III Plus Users Guide 29 3HHO2II0RGH Peel-Off Mode advances one label at a t ime. The printer does not print another label until the first label is removed. The T AKE LABEL light flashes until the label is removed. The liner is wound on the rewind spindle, but the rewind plate is not used[...]

  • Seite 50

    30 Zebra Xi III Plus Users Guide Labels and Print Modes Print M ode Choic es 10. Close the printhead. The liner winds on the rewind spindle or core. The callouts in the illustration and table that follow show the printe r and labels in Peel-of f Mode. &DOO RXW 'HVFULSWLRQ  Printhead lever  Media guide  Media supply guide  Label[...]

  • Seite 51

    Labels and Print Modes Prin t Mode Choi ces Zebra Xi III Plus Users Guide 31 5HZLQG0RG HZLWK&XWWHU2 SWLRQ Printers with the Cutter option can use the Rewind Mode , if you wish to print and save a roll of labels. A cutter , as its name suggests, is a rota ting knife with a se lf-sharpening blade. The cutter is attached to the front o[...]

  • Seite 52

    32 Zebra Xi III Plus Users Guide Labels and Print Modes Print M ode Choic es 13. If you are using a core, slide it onto the re wind spindle until it is flush against the guide plate. 14. W ind the label liner around either the 3 i n. (76 mm) core or the rewind spindle. 15. Reinstall the hook. 16. Flip up the media supply guide. 17. Slide in the med[...]

  • Seite 53

    Labels and Print Modes Prin t Mode Choi ces Zebra Xi III Plus Users Guide 33 5HZLQG6SLQG OH Rewind Mode and Peel-Off Mode use the rewind spindle. Label liner must be removed every time you cha nge labels for the printer to work correctly . T o remove label line r from the rewind sp indle, complete thes e step s: 1. Unwind approximately 36 in. (9[...]

  • Seite 54

    34 Zebra Xi III Plus Users Guide Labels and Print Modes Print M ode Choic es 7RORD GIDQIR OGODEH OVFRP SOHWH WKHVHV WHSV 1. Open the printhead. 2. Slide the media guide as far from the printer fra me as possible. 3. How do you want to feed fanfold labels? • From the bottom slot in the printer body . The callouts in the ill[...]

  • Seite 55

    Labels and Print Modes Prin t Mode Choi ces Zebra Xi III Plus Users Guide 35 Cutter option • If you do not have a cutter , go to S tep 4, on page 35 . • If you do have a cutter , feed the fa nfold labels through the cutter . 4. Slide in the media guide so it just touches, but does no t restrict, the edge of the labels. 5. Close the printhead le[...]

  • Seite 56

    36 Zebra Xi III Plus Users Guide Labels and Print Modes Print M ode Choic es 2. While holding the ribbon take-up spindle, turn the knob clockwise until it stops. This causes the ribbon release bars to pivot down, easing the spindle’ s grip on the wound ribbon. 3. Slide the ribbon off the ribbon take-up spindle. Once the spent ribbon has been remo[...]

  • Seite 57

    Zebra Xi III Plus Users Guide 37 C HAPTE R 4 'DWD3RUWV This chapter describes the standard communication ports on the Xi II I Plus printers. Content s Para llel Port . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Seri al Por t . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 USB 2.0 Port . . . . . . . . . . . . . . . . .[...]

  • Seite 58

    38 Zebra Xi III Plus Us ers Guide Data Ports S tanda rd Po rts 6WDQ GDUG3 RUWV The dif fere nt ports available to connect the Xi III Plus printer to your computer or network include:  Parallel  Serial RS232  USB 3DUDOOHO 3RUW A standard 36-pin parallel connector ( as show n below) is available at the back of the printer for connectio[...]

  • Seite 59

    Data Ports S tandard Ports Zebra Xi III Plus Users Guide 39 The following table shows the pin configuration and function of a standa rd computer- to-printer parallel c able. 3LQ &RQQHFWRUV 'HV FUL SW L RQ 1 nS trobe/HostClk 2–9 Data Bits 1 –8 10 nACK/PtrClk 11 Busy/Ptr Busy 12 PError/ ACKDataReq 13 Select/ Xflag 14 nAutoFd/[...]

  • Seite 60

    40 Zebra Xi III Plus Us ers Guide Data Ports S tanda rd Po rts 6HULDO3RUW Communication using the serial data port of the printer requires choosing the number of data and stop bits, pa rity , and handshaking. Default settings are 9600 baud, 8 data bits, 1 stop bit, no parity , and XO N/XOFF . Parity applies only to data transmitted by the printe[...]

  • Seite 61

    Data Ports S tandard Ports Zebra Xi III Plus Users Guide 41 6HULDOSLQ FRQILJX UDWLRQ The table below shows the pin configuration a nd function of the rear panel serial data connector on the printer . 3LQ1R 1DPH 'HVF UL SWLR Q 1 — N ot connected 2 RXD Receive data—data input to printer 3 TXD T ransmit data—data output from pri[...]

  • Seite 62

    42 Zebra Xi III Plus Us ers Guide Data Ports S tanda rd Po rts 56 ,QWHU IDFH& RQQ HFWL RQV 'LUHFWFRQQHF WLRQWRDFRPSXWHU The printer is configured as Data T erminal Equipment (DTE). This illustration sho ws the internal connec tions of the printer ’ s RS-232 connector . Note • Adapters are available from Ze[...]

  • Seite 63

    Data Ports S tandard Ports Zebra Xi III Plus Users Guide 43 '% WR'% FRQQHF WLRQV An interface adapter is required (Zebra part number 33138) to connect the printer ’ s DB-9 interface to a DB-25 c onnector . A gene ric DB-25 adapter may al so be used. The +5 VDC signal source would not be passed through a generic a[...]

  • Seite 64

    44 Zebra Xi III Plus Us ers Guide Data Ports S tanda rd Po rts 0RGHP FR QQ HFWLRQ When the printer is connected via its RS-232 interface to Data Communica tion Equipment (DCE) such as a modem, use a standard RS-232 (straight-through) interfa ce cable. See this illustration for the conn ections require d for this cable. DTE (Printer) DCE (Modem, [...]

  • Seite 65

    Data Ports S tandard Ports Zebra Xi III Plus Users Guide 45 56 56 ,QW HUFR QQH FWLRQV An interface adapter (Zebra part number 33130) is require d to connect the printer ’ s RS-232 DB-9 interface to a host computer through an RS-422 or RS-485 interface. A generic DB-25 adap ter can be used. This illustration sho ws th[...]

  • Seite 66

    46 Zebra Xi III Plus Us ers Guide Data Ports S tanda rd Po rts The USB connection is shown in callout 1 of the illustration below . 'DW D & DE OHV Data cables must be full y shi elded and fitte d with metal or metali zed connector shells. Shielded cables and connect ors are required to prevent radiation and reception of electrical noise[...]

  • Seite 67

    Zebra Xi III Plus Users Guide 47 C HAPTE R 5 0HPRU&DUGV This chapter describes the optional cards that can be used with the Xi II I Plus printer and gives instructions for installation. Content s PCMCIA Car d . . . . . . . . . . . . . . . . . . . . . . . . . 4 8 CompactFlash Card . . . . . . . . . . . . . . . . . . . . 50[...]

  • Seite 68

    48 Zebra Xi III Plus Users Guide Memory Cards PCMCIA Car d 3&0&, $&DUG See the instructions below to install the T ype I- or T ype II-compliant PCMCIA card. 7RLQ VWD OOWK H3& 0&, $F DUG FRPS OHWH WKH VHVW HSV 1. Review the illustration and table that follows to i dentify the components you will b[...]

  • Seite 69

    Memor y Cards PCMC IA Card Zebra Xi III Plus Users Guide 49 The printer is now ready to operate with the additional memory or font option. T o be sure the ca rd has successfully initialized, print a configuration label a s instructed in T o print a configuration label, complete these steps: on page 18 a nd review it to see whether th e new memory c[...]

  • Seite 70

    50 Zebra Xi III Plus Users Guide Memory Cards CompactFlash Card &RPSDFW) ODVK &DUG CompactFlash cards are nonvola tile memory cards that store data even when the power to the printer is turned off. 7RLQ VWD OOW KH7 SH ,FR PSO LDQ W&RPSDFW)ODVK FDUGFRPSOHWH WKHVHV WHSV  1. T urn the [...]

  • Seite 71

    Memor y Cards Com pac tFla sh Car d Zebra Xi III Plus Users Guide 51 2. Remove the electronics cover by removing the two screws nea r the bottom. 3. Lift the elec tronics cove r at the rear top cor ner as shown and pull the corner forward and up, then lift the cover up and away from the printer . 4. Insert the CompactFlash card into the card slot o[...]

  • Seite 72

    52 Zebra Xi III Plus Users Guid e Memory Cards CompactFlash Card  5. Reinstall the electronics cover by lowering the cover so the lip goes into the channel on the top of the printer . Secure the cover by r einstalling the two screws on the bottom of the cover . 6. Reconnect the printer AC power cord. 7. Press and hold CANCEL while turning the pr[...]

  • Seite 73

    Zebra Xi III Plus Users Guide 53 $SSHQGL [HV These appendixes explain using the front pa nel controls, troubleshooting your printer , choosing printer supplies, and caring for your printer . Content s Fron t Panel Contr ols . . . . . . . . . . . . . . . . . . . . 5 4 S pecifica tions and Care . . . . . . . . . . . . . . . . . . 9 2 T roubles hootin[...]

  • Seite 74

    54 Zebra Xi III Plus Users Guide Appendixes Fron t Pane l Cont rols )URQ W3DQ HO&RQW UROV After you have installed the labels and ribbon and printed a configuration label, you can change your Xi III Plu s printer settings using the front panel controls. Bas ic information about using the front panel c ontrols is included in this appendix.[...]

  • Seite 75

    Appendixes Front Panel Contro ls Zebra Xi III Plus Users Guide 55 . 3DVVZRUG3URWHFWHG 3DUDPHWHUV Certain parameters a re password-pr otected by f actory defau lt, includi ng the communicat ion parame ters. The first attempt to change one of these parameters (pressing one of the black ovals) requires you to enter a four-digit password at the ([...]

  • Seite 76

    56 Zebra Xi III Plus Users Guide Appendixes Fron t Pane l Cont rols 'HIDXO WSDV VZR UGY DOXH The default password value is 1234 . The password can be changed using the ^KP (Define Password) ZPL II instruction or through ZebraLink ™ We b V i e w (ZebraNet ® PrintSer ver II required). 'LVDE OHWK HSDVV ZR UGS URWHFW LRQ [...]

  • Seite 77

    Appendixes Front Panel Contro ls Zebra Xi III Plus Users Guide 57 )URQW3DQHO/LJKWV /LJKW 6W DWXV ,QGLFDWHV POWER Off ( O ) The printer is of f or power is not applied. On ( I ) The printer is on. T AKE LABE L Off Normal operation. Flashing (Peel-Off Mode only .) The labe l is available. Printing is paused until the label i s removed. ERROR[...]

  • Seite 78

    58 Zebra Xi III Plus Users Guide Appendixes Fron t Pane l Cont rols DA T A Off Normal operation. No da ta being received or processed. On Data processing or printing is taking place. No data is being received. Note • If two operating conditions occur simultaneously (for example, one that causes a light to be on constantly and one that causes the [...]

  • Seite 79

    Appendixes Front Panel Contro ls Zebra Xi III Plus Users Guide 59 )UR QW 3 DQ HO / &' The LCD display is shown in the order it appears when using NEXT/SA VE to move through the front panel menu. PREVIOUS may be used to move backward in the menu. 3UHVV /&' 'HVFULSW LRQ 35,17(5 5($'< '$5.1(66  Adjusting[...]

  • Seite 80

    60 Zebra Xi III Plus Users Guide Appendixes Fron t Pane l Cont rols 35,1763 ((' Adjustin g Print Speed:  Press the right black oval to increase print speed.  Press the left black oval to decrease pr int speed. Default: 2 ips Range: 2 ips to +12 ips (depends on specific printer) Slower print speeds typically yield better print qu[...]

  • Seite 81

    Appendixes Front Panel Contro ls Zebra Xi III Plus Users Guide 61 0(',$7< 3( Setting Me dia T ype: Press either black oval to display choices. Default: Continuous Select ions : Continuous, non-continuous This parameter t ells the printer the typ e of media you are using. Selecting continuous media requires that you include a label length[...]

  • Seite 82

    62 Zebra Xi III Plus Users Guide Appendixes Fron t Pane l Cont rols 35,17 0(7+2' Select ing Prin t Method: Press either black oval to display choices. Default: Thermal trans fer Select ions : Thermal tr ansfer , direct t hermal The print method parameter tells the printer the method of printing you wish to use: direct thermal (no ribbon) or[...]

  • Seite 83

    Appendixes Front Panel Contro ls Zebra Xi III Plus Users Guide 63 0$;,080 /(1*7+ Setting Maximu m Length:  T o increase the value, press the right black ova l.  T o decrease the value, pr ess the left black oval. Default Rang e: The default and range of acceptable values vary depending on your printer ’ s configuration. V a lues[...]

  • Seite 84

    64 Zebra Xi III Plus Users Guide Appendixes Fron t Pane l Cont rols ($5/< :$51,1* Setting Early W arning: Press the right or left black oval to display other choices. Default: Media disabled, ribbon disabled, maintenance disabled Select ions: Media disabled, media enabled, ribbon disabled, ribbon enabled, maintenance disabled, maintenance ena[...]

  • Seite 85

    Appendixes Front Panel Contro ls Zebra Xi III Plus Users Guide 65 When the printer detects it is running low with less than 15% of the remain ing labels or ribbons, :$51,1*0( ',$/2: or :$51,1* 5,%%21 /2: appears on the LCD. If the aler t function has been enabled, an alert is also sent. When the printhead is opened and then closed [...]

  • Seite 86

    66 Zebra Xi III Plus Users Guide Appendixes Fron t Pane l Cont rols /,67%$5  &2'(6 List Bar Codes: Press the right black oval to print a label listing a ll available bar codes in the printer . /,67,0$ *(6 List Images: Press the right black oval to print a label listing a ll available im ages stored in the printer ’ s RAM, Flash [...]

  • Seite 87

    Appendixes Front Panel Contro ls Zebra Xi III Plus Users Guide 67 )250$7& $5' $ % Initialize Me mory Card Caution • Perform this operation only when it is necessary to erase all pr eviously stored information from the memory card. 1. Press NEXT/SA VE to bypass this functi on. If your printer is set to require a pa[...]

  • Seite 88

    68 Zebra Xi III Plus Users Guide Appendixes Fron t Pane l Cont rols ,1,7)/$ 6+ 0(0 Initialize Flash M emory Caution • Perform this operation only when it is necessary to erase all pr eviously stored information from Flash memory . 1. T o bypass this function, press NEXT/SA VE . 2. Press the right black oval to select <(6 . If your printe[...]

  • Seite 89

    Appendixes Front Panel Contro ls Zebra Xi III Plus Users Guide 69 6(1625 352),/( Sensor Profile: 1. Press NEXT/SA VE to skip this standard calibration procedur e and continue with the media and ribbon calibration parameter that follows. 2. Press the right black oval to start this standard calibration procedur e and print a media sensor profile. See[...]

  • Seite 90

    70 Zebra Xi III Plus Users Guide Appendixes Fron t Pane l Cont rols 0(',$$1 ' 5,%%21 &$/,%5$7 ( This procedure is us ed t o adj ust the sensitiv ity of the media and ribbon sensors. Note • The procedure must be followed exactly a s presented. All steps must be performed even if only one of the sensors requires adjustment. 1[...]

  • Seite 91

    Appendixes Front Panel Contro ls Zebra Xi III Plus Users Guide 71 — 5(/2$'$ // When 5(/2 $'$// is displayed: 1. Open the printhead and pull the media forward until a label is positioned under the media sensor . 2. Reload the ribbon back into to its proper position. 3. Close t he print head. 4. Press the right black oval to continu[...]

  • Seite 92

    72 Zebra Xi III Plus Users Guide Appendixes Fron t Pane l Cont rols %$8' Setting B aud: Press the right or left black oval to display other choices. Default: 9600 Select ions : 1 10, 300, 600, 1200, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600, 1 15200 The baud setting of the printer must match the baud setting of the host computer for [...]

  • Seite 93

    Appendixes Front Panel Contro ls Zebra Xi III Plus Users Guide 73 +267 +$1'6+$. ( Settin g Hos t Ha ndsh ake : Press the right or left black oval to display other choices. Default: XON/XOFF Select ions : XON/XOFF , R TS/CTS, DTR/DSR The handshake protocol of the printer must match the handshake protocol of the host computer for proper commu[...]

  • Seite 94

    74 Zebra Xi III Plus Users Guide Appendixes Fron t Pane l Cont rols 1(7:25. ,' Setting N etwork ID: 1. Press the left black oval to move to the next digit position. 2. Press the right black oval to increase the value of the digit. Default: 000 Range: 000–999 Network ID is used to assign a unique number to a printer used in an RS-422/RS-48[...]

  • Seite 95

    Appendixes Front Panel Contro ls Zebra Xi III Plus Users Guide 75 &20081,& $ 7,216 Setting Commu nications Mode: Press the right or left black oval to display other choices. Default: Normal mode Select ions : Normal mode, diagnostics The communication diagnostics mode is a troubleshooting tool for checking the interconnection between the[...]

  • Seite 96

    76 Zebra Xi III Plus Users Guide Appendixes Fron t Pane l Cont rols &21752/ 35(),; Contr ol Prefix Character: 1. Press the left black oval to move to the next digit position. 2. Press the right black oval to increase the value of the digit. Default: 7E (tilde—displayed as a black square) Range: 00–FF The printer looks for this two-digit [...]

  • Seite 97

    Appendixes Front Panel Contro ls Zebra Xi III Plus Users Guide 77 '(/,0,7( 5 &+$5 Delimiter Charac ter: 1. Press the left black oval to move to the next digit position. 2. Press the right black oval to increase the value of the digit. Default: 2C (comma) Range: 00–FF The delimiter charac ter is a 2- digit hex value used as a parameter[...]

  • Seite 98

    78 Zebra Xi III Plus Users Guide Appendixes Fron t Pane l Cont rols 0(',$32 :(5 83 Media Power Up : Press the right or left black oval to display the choices.This sets the action of the labels when the printer is turned on. Default: Cali bra tio n Select ions : Feed, Calibration, Length, and No Motion Calibration : Determines the length [...]

  • Seite 99

    Appendixes Front Panel Contro ls Zebra Xi III Plus Users Guide 79 %$&.)((' Backf eed Seq uence: Press the r ight or left black oval to display other choices. Default: Default (90%) Select ions : Default, after , before, 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, off This parameter establis hes when and how much label backf eed oc curs af ter [...]

  • Seite 100

    80 Zebra Xi III Plus Users Guide Appendixes Fron t Pane l Cont rols /()7 326,7,21 Adjusting Left Position: The displayed value represents dots. 1. Press the left black oval to move the cursor . 2. Press the right black oval to change between + and to increase the value of the digit. Default: 0000 Range: –9999 to +9999 3. For a negative value, [...]

  • Seite 101

    Appendixes Front Panel Contro ls Zebra Xi III Plus Users Guide 81 +($' 5(6,6725  Setting the Head Resistor V alue: Caution • Do not set the v alue higher than that shown on the printhead. Setting a higher value may damage the printhead. 1. Press the left black oval to move to the next digit position. 2. Press the right black oval to in[...]

  • Seite 102

    82 Zebra Xi III Plus Users Guide Appendixes Fron t Pane l Cont rols 9(5,),(5  3257 Sett ing the V erifi er Po rt: Press the right or left black oval to display other choices. Default: Off Select ions : Off, VER-RP RNT , VER-THRUPUT The auxiliary port is used to determine how the printer reacts to the online verifier . The three operating conditi[...]

  • Seite 103

    Appendixes Front Panel Contro ls Zebra Xi III Plus Users Guide 83 $33/,&$7 25 3257 Setting the Applicator Port: Press the right or left black oval to display other choices. Default: Off Select ions: Off, mode 1, mode 2, mode 3, mode 4 Determines the action of the verifier port. Off: The applicator port is of f. Mode 1: Asserts the ~END_PRINT[...]

  • Seite 104

    84 Zebra Xi III Plus Users Guide Appendixes Fron t Pane l Cont rols 67$5735 ,17 6,* S tart Pr int Si gnal: Press the right or left black oval to display other choices. Default: Pulse Mode Select ions : Pulse Mode, Level Mode This parameter determi nes how the printer reacts to the St art Print Signal input on pin 3 of the applicator interface[...]

  • Seite 105

    Appendixes Front Panel Contro ls Zebra Xi III Plus Users Guide 85 5(6<1&+ 02'( Resynch M ode: Press the right or left black oval to display other choices. Default: Feed Mode Select ions : Feed Mode, Error Mode This paramete r determines how the printer reacts if the label synchronization is lost and the label top is not where expecte[...]

  • Seite 106

    86 Zebra Xi III Plus Users Guide Appendixes Fron t Pane l Cont rols :(%6 These paramet ers are automatically se t during the calibration procedure. They should be c hanged only by a qualified service technician. See the maintenance manual for mo re information on these parameters. Press NEXT/SA VE to scroll through these parameters. 0(',[...]

  • Seite 107

    Appendixes Front Panel Contro ls Zebra Xi III Plus Users Guide 87 /&'$'-8 67 LCD Adjust ment: 1. Press the left black oval to move the cursor . 2. Press the right black oval to change between + and to increase the value of the digit. Range: 00–19 This parameter allows you to adjust the contrast of your LCD if it is dif ficult to [...]

  • Seite 108

    88 Zebra Xi III Plus Users Guide Appendixes Fron t Pane l Cont rols 57&'$7( R TC (Real-time clock) Date: This parameter all ows you to set the date following the convention selected in ,'/(',63/$ < . 1. Press the left black oval to move to the next digit position. 2. Press the right black oval to increase the value of th[...]

  • Seite 109

    Appendixes Front Panel Contro ls Zebra Xi III Plus Users Guide 89 =HEUD 1HW  3ULQW6HUYHU,,2SWLRQ'LVSOD These menu options displays only if you have a ZebraNet ® PrintServer II installed. 3UHV V /&' ([SODQDWL RQ ,3 5(62/87, 21 IP Resolution: Press the right or left black oval to display other choices. Default: Dynamic [...]

  • Seite 110

    90 Zebra Xi III Plus Users Guide Appendixes Fron t Pane l Cont rols ,3$''5( 66 IP Address: 1. Press the left black oval to move to the next digit position. 2. Press the right black oval to increase the value of the digit. This parameter allows you to select the I P address if perma nent was chosen in ,35(62/87,21 . (If dynami c was [...]

  • Seite 111

    Appendixes Zebra Xi III Plus Users Guide 91 3UHV V /&' ([SODQDWLRQ /$1*8$*( Selecting the Display Langu age: Press the right or left black oval to display other choices. Default: English Selections: English, S panish, French, German, Italian, Norwegian, Portuguese, Swedish, Danish, Spanish 2, Dutch, Finnish, Japanese This parameter allows [...]

  • Seite 112

    92 Zebra Xi III Plus Users Guide Appendixes S pecifica tions and Care 6SHFLILFDWLR QVDQG&DUH This appendix describes the specifications f o r your printer and tells you how to keep it in good condition. 6WDQGDUG ;L ,,, 3OXV )HDWXUHV  Thermal transfer and direc t thermal printing  DRAM 16 MB  USB 2.0 Port  Real-time Cl oc[...]

  • Seite 113

    Appendixes S pecific ations a nd Car e Zebra Xi III Plus Users Guide 93  Automatic virtual input buf fer management  Format inversion  Mirror image printing  Four-posit ion field rotation (0°, 90°, 180°, 270°)  Slew command  Controlled via mainframe, mini-computer , PC, portable data terminal  Programmable quantity with pri[...]

  • Seite 114

    94 Zebra Xi III Plus Users Guide Appendixes S pecifica tions and Care  MaxiCode  Micro PDF  MSI  PDF-417 (2-dimensional bar code)  PLANET code  Pless ey  POSTNET  QR-Code  RSS code  St andard 2 of 5  TLC 39  UPC-A, UPC-E, UPC extensions *HQHUDO 6SHFLILFDWLRQV The tables below give the general specifications fo[...]

  • Seite 115

    Appendixes S pecific ations a nd Car e Zebra Xi III Plus Users Guide 95  ;L ,,, 3O XV  ;L ,,, 3O XV  DQG  ;L ,,, 3O XV $JHQFDSSURYDOVIRUDOOSULQWHUV Approvals include:  Binational UL 60950 3rd edition/CSA CA N/CSA-C22.2 No. 60950-00 3rd edition  IEC 950/EN60950  EN55022:1998 Class B [...]

  • Seite 116

    96 Zebra Xi III Plus Users Guide Appendixes S pecifica tions and Care (OHFWU LFDO6 SHFL ILFD WLRQ V 3RZ HU  ;L ,,, 3OXV  ;L ,,, 3OXV  ;L ,,, 3OXV General 90–264 V AC; 48–62 Hz 90–264 V AC; 48–62 Hz 90–264 V AC; 48–62 Hz Power consumption printing P AUSE test at slowest speed 121 W 121 W 180 W Printer idle 20 W[...]

  • Seite 117

    Appendixes S pecific ations a nd Car e Zebra Xi III Plus Users Guide 97 7HPSH UDWXUHI RU3ULQ WHU2SHU DWLRQDQG 6WRUDJH 5HO DWLYH +XPLGL WIRU 3ULQWH U2SHUDW LRQDQG 6WRUDJH 3ULQW6SHFLILFDWLRQVE0RGHO Refer to the key and the tables that follow for printer specificat ions. 0RGHO6S HFLILFDWLRQV.H[...]

  • Seite 118

    98 Zebra Xi III Plus Users Guide Appendixes S pecifica tions and Care  ;L ,,, 3O XV 6SHFLILFDWLRQ  ;L III 3OXV   ;L III 3OXV    ;L II I 3OXV  Printhea d resolution 203 dots/inch (8 dots/mm) 300 dots/inch (12 dots/mm) 600 dots/inch (24 dots/mm) Dot size (width × length) 0.00[...]

  • Seite 119

    Appendixes S pecific ations a nd Car e Zebra Xi III Plus Users Guide 99  ;L ,,, 3O XV DQG ;L ,,, 3OXV 6SHFLILFDWLR Q  ;L ,,, 3OXV  ;L ,,, 3OXV  Printhead resolution 300 dots/in ch (12 dots/mm) 600 dots/inch (24 dots/mm) Dot size (width × length) 0.0033 in. × 0.0039 in. (0.084 mm × 0.100 mm) 0.0016 in. × 0.0016 i[...]

  • Seite 120

    100 Zebra Xi III Plus Users Guide Appendixes S pecifica tions and Care  ;L ,,, 3O XV  ;L ,,, 3O XV  DQG   ;L ,,, 3OXV 6SHFLILFDWLRQ  ;L III 3OXV  ;L III 3O XV  ;L II I 3OXV Printhea d resolution 203 dots/inch (8 dots/mm) 300 dots/inch (12 dots/mm) 203 dots/inch (8 dots/mm) Dot siz[...]

  • Seite 121

    Appendixes S pecific ations a nd Car e Zebra Xi III Plus Users Guide 101 5LEERQ6SHFLI LFDWLRQVE0RGHO  ;L ,,, 3O XV  ;L II I 3OXV Note • Match the ribbon to the label width and printhead width you are using.  Ribbon must be wound with the coated side out.  Ribbon should be at least as wide as the labels to protect th[...]

  • Seite 122

    102 Zebra Xi III Plus Users Guide Appendixes S pecifica tions and Care  ;L ,,, 3O XV DQG ;L ,,, 3OXV  ;L ,,, 3O XV   ;L ,,, 3O XV  DQG  ;L ,,, 3O XV 6SHFLILFDW LRQV  ;L III 3OXV  ;L III 3OXV Printhead resolution 300 dots/inch (12 dots/mm) 600 dots/inch (24 dots/mm) Ribbon wi[...]

  • Seite 123

    Appendixes S pecific ations a nd Car e Zebra Xi III Plus Users Guide 103 /DEHO 6S HFLIL FDW LRQ V Xi III P lus printers need the correct size and type of labels for best perfor mance. The tables that follow give you the specifications you need.  ;L III 3OXV 3ULQWHUV /DEHO 6SHFLIL FDW LRQ .H This table contains the key fo[...]

  • Seite 124

    104 Zebra Xi III Plus Users Guide Appendixes S pecifica tions and Care J Maximum Q Prefe rred 6SHFLILFDWLRQV  ;L ,,, 3OXV    ;L ,,, 3OXV    ;L ,,, 3OXV   Minimum label length 0.7 in. (18 mm) T 0.7 in. (18 mm) T 0.7 in. (18 mm) T 0.5 in.(13 mm) P 0.5 in.(13 mm) P 0.5 in. (13 mm) P 1.5 in[...]

  • Seite 125

    Appendixes S pecific ations a nd Car e Zebra Xi III Plus Users Guide 105 %ODFN0D UN6HQVLQJ 2QO Maximum inte rnal fanfold media pack size (label + line r) L × W × H 8.0 ″ × 4.5 ″ × 4.5 ″ (20 mm × 1 14 mm × 1 14 mm) 8.0 ″ × 5.5 ″ × 4.5 ″ (203 mm × 40 mm × 1 14 mm) 8.0 ″ × 7.1 ″ × 4.5 ″ (203 mm × 180 mm × 1 14[...]

  • Seite 126

    106 Zebra Xi III Plus Users Guide Appendixes S pecifica tions and Care /DEHO 6S HFLIL FDW LRQ V  ;L ,,, 3O XV  ;L ,,, 3O XV  ;L ,,, 3O XV  ;L ,,, 3OXV DQ G  ;L ,,, 3O XV 3ULQWHUV /DEHO 6SHFLIL FDWLR Q.H This table contains the key for the la bel modes, dimensions, an[...]

  • Seite 127

    Appendixes S pecific ations a nd Car e Zebra Xi III Plus Users Guide 107 T otal thickness (includes liner , if any) 0.003 in. (0.076 m m) F 0.012 in. (0.305 mm) J 0.003 in. (0.076 mm) F 0.012 in. (0.305 mm) J Cutter maximum full- width media thickness 0.014 in. (0.35 mm) 0.014 in. (0.35 mm) Roll media core inside diam eter 3i n . ( 7 6m m ) 3[...]

  • Seite 128

    108 Zebra Xi III Plus Users Guide Appendixes S pecifica tions and Care  ;L ,,, 3OXV DQG ;L ,,, 3OXV %ODFN0 DUN6HQV LQJ2QO  ;L ,,, 3O XV  ;L ,,, 3OXV  DQG ;L ,,, 3OXV 6SHFLILFDWLRQV  ;L ,,, 3OXV  ;L ,,, 3O XV Mark length (measuring parallel to label or tag edge) 0.1[...]

  • Seite 129

    Appendixes S pecific ations a nd Car e Zebra Xi III Plus Users Guide 109 Cutter m aximum full-width media thickness 0.009 in. (0.23 mm) 0.007 in. (0.18 mm) 0.005 in.(0.14 mm) Roll media core inside diameter 3 in. (76 mm) 3 in. (76 mm) 3 in. (76 mm) Max imu m ro ll diameter 8.0 in. (203 mm) 8.0 in. (203 mm) 8.0 in.(203 mm) Inter-label gap 0.079 in. [...]

  • Seite 130

    1 10 Zebr a Xi II I Plus Users Guide Appendixes S pecifica tions and Care  ;L ,,, 3O XV DQ G ;L ,,,3OXV%ODFN0DUN6HQVLQJ 2QO  3RZHU&RUG6 SHFLILFDWLRQV Y our power cord must meed these standards:  The overall length must be less than 9.8 ft. (3.0 m).  It must be rated for at least 5 A, 250 V . ?[...]

  • Seite 131

    Appendixes S pecific ations a nd Car e Zebra Xi III Plus Users Guide 111  The AC power plug and IEC 320 connector mu st bear the certificat ion mark of at least one of the known international safety or ganizations shown below . &DOORXW 'HVFULSWLRQ  AC power plug for your country  3-conductor HAR cable  IEC 320 connector  Neu[...]

  • Seite 132

    1 12 Zebr a Xi II I Plus Users Guide Appendixes S pecifica tions and Care 3ULQWHU&DUH Cleaning your printer regularly maintains pr int quality and may extend the life of the printer . 5RXWLQ H3URF HGXUHV The recommended cleaning sche dule is shown in the table below . See the following pages for specific proce dures. Caution • Use only [...]

  • Seite 133

    Appendixes S pecific ations a nd Car e Zebra Xi III Plus Users Guide 11 3 ([WHULRU  Clean the outside surfaces of the printer with a lint-free cloth.  Use a mild detergent solution or desktop cleaner sparingly , as needed. ,QWHULRU  After every four rolls of labe ls, in spect the inside of the printer .  Use a soft bristle brus[...]

  • Seite 134

    1 14 Zebr a Xi II I Plus Users Guide Appendixes S pecifica tions and Care 7RFOH DQWKHSULQWKHDGFRPSOHWH WKHVHVWHSV 1. Open the printhead. 2. Remove the labels and ribbon (if loaded). 3. Moisten an applicator tip w ith solvent and wipe along the print eleme nts from end to end. (The print elements are on the brown strip just b[...]

  • Seite 135

    Appendixes S pecific ations a nd Car e Zebra Xi III Plus Users Guide 11 5 . &DOOR XW 'HV FUL S WL RQ  Label-available sensor  Black mark sensor  Ribbon sensor  Platen r oller  T ear-of f bar  Printhead lever  Printhead 3 2 5 4 1 7 6[...]

  • Seite 136

    1 16 Zebr a Xi II I Plus Users Guide Appendixes S pecifica tions and Care 6QDS3OD WH Clean the snap plate when label adhesive or a label is stuck to the underside of the snap plate. 7RF OHDQ WKH VQDS SOD WH FRP SOHWH WKHVHV WHSV  1. Insert a small-blade screwdrive r or similar tool into the loop on the left side of the[...]

  • Seite 137

    Appendixes S pecific ations a nd Car e Zebra Xi III Plus Users Guide 11 7 7. T o reinstall the snap plate, insert the two tabs on the bottom of the snap plate into the two slots of the media path. 8. Slide the snap plate toward you. 9. Press down on the loops to lock the snap plate into place. &XWWHU If the cutter i s not cutting the la bels[...]

  • Seite 138

    1 18 Zebr a Xi II I Plus Users Guide Appendixes S pecifica tions and Care )XV H 5HS OD FH PH QW   ;L ,,, 3O XV  ;L ,, , 3OXV   ;L ,, , 3OXV   ;L ,,, 3OXV  DQG  ;L ,,, 3O XV The printer uses a metric-style fuse (5 × 20 mm IEC) rated at F5A, 250 V . The AC power entry module com[...]

  • Seite 139

    Appendixes S pecific ations a nd Car e Zebra Xi III Plus Users Guide 11 9 2. Remove the faulty fuse and install a new fuse in the in-circuit position as shown. If you use the spare fuse, be sure to orde r a replacement fuse fr om your Zebra distributor . The illustrati on callouts and the ta ble that follows identify t he parts of the fuse holder .[...]

  • Seite 140

    120 Zebra Xi III Plus Users Guide Appendixes T roubles hootin g 7URX EOHVKRRW LQJ If there is an error c ondition on the printer or the labels are not printing or advancing correctly , review the ch ecklist below .  What type of labels are you using? Review the types of label and the print modes, see Labels and Print Modes on page 23 .  Revie[...]

  • Seite 141

    Appendixes T roubles hootin g Zebra Xi III Plus Users Guide 121 7RDGMXVWSULQWK HDGSUHVVX UHFRPSOHWHWKHVHVWHSV 1. Print some labels at 2.4 in. (61 mm) per second by running the P AUSE Self T est described in T o perform a P AUSE self test, complete these steps: on page 134 . 2. While printing labels, lower the darkness settin[...]

  • Seite 142

    122 Zebra Xi III Plus Users Guide Appendixes T roubles hootin g 0HGLDDQG5LEERQ6HQVRU&DOLEUDWLRQ Media and ribbon sensor calibration is one of the most common adjustments to the printer settings. There are two different t ypes of calibration that can be done by the printer . Auto-calibration is done by the printer feeding media when [...]

  • Seite 143

    Appendixes T roubles hootin g Zebra Xi III Plus Users Guide 123 /&'(UURU &RQGLWLRQV The LCD displays messages when there is an error condition. The error messages are listed belo w with the most li kely causes and their solution. (UURU& RQ GLWLRQ 5LEE RQ 2XW (UURU& RQGLW LRQ² 3DSHU2 XW &DXVH 6ROXWLRQ T[...]

  • Seite 144

    124 Zebra Xi III Plus Users Guide Appendixes T roubles hootin g (UURU& RQGLWLR Q² +HDG2SH Q (UURU &RQGLWL RQ²+HDG (OHPHQW %DG :DUQL QJ²5LEERQ ,Q Media Sensor does not match labels.  Using the front panel controls, check the sensor type to ensure that the correct one is used for the labels loaded.  Calibrate [...]

  • Seite 145

    Appendixes T roubles hootin g Zebra Xi III Plus Users Guide 125 :DUQL QJ²+HDG 7RR+R W :DUQL QJ²&OH DQ+HDG 1RZ Caution • The printhead is hot and can cause severe burns. Allow the printhead to cool. &DXVH 6R OXWLRQ The printhead is over temperature. Printing automati cally resumes when the printhead elements cool to an accept[...]

  • Seite 146

    126 Zebra Xi III Plus Users Guide Appendixes T roubles hootin g :DUQL QJ²+HDG &ROG :DUQL QJ²&XWW HU-DPPHG Caution • An improperly connected cable ca n cause this warning. The printhead is hot and can cause severe burns. Allow the printhead to cool. &DXVH 6R OXWLRQ The printhead is under temperature. Continue printing while the[...]

  • Seite 147

    Appendixes T roubles hootin g Zebra Xi III Plus Users Guide 127 2XWRI 0HPRU 3ULQW4XDOLW3UREOHPV *HQHUDO 3ULQW4XD OLW,VV XHV &DXVH 6R OXWLRQ There is not enough memory to perform the function shown on the second line of the error message .  Shut off the printer to clear memory and try to print again.  If the e[...]

  • Seite 148

    128 Zebra Xi III Plus Users Guide Appendixes T roubles hootin g *UDOLQHV RQEODQ NODEHOV ZLWKQRFRQV LVWHQWSD WWHUQ /LJ KWFRQVLVW HQWYHUWL FDOOL QHVUXQQLQJ WKURXJ KDOORI WKHODEH OV ,QWHUPLWWHQW FUHDVHV RQWKHOH IWDQGULJKW HGJHVRIW KHODEHOV The printhead is dirty . Cle[...]

  • Seite 149

    Appendixes T roubles hootin g Zebra Xi III Plus Users Guide 129 :ULQNOHG5LEERQ &DXVH 6ROXWLRQ The ribbon is not loaded correctly . Load the ribbon correctly . See T o load the ribbon, complete these steps: on page 14 . The darkness setting is incorrect. Set the darkness to the lowest possible setting for good print quality . Incorrect printh[...]

  • Seite 150

    130 Zebra Xi III Plus Users Guide Appendixes T roubles hootin g &RPPXQLFDWLRQV A label format was sent to the printer but not recognized. The DA T A light does not flash. A label fo rmat was sent to the printer . Seve ral labels print, t hen the printer skips, misplaces, mis ses, or distorts the ima ge on the label. &DXVH 6ROXWLRQ The commu[...]

  • Seite 151

    Appendixes T roubles hootin g Zebra Xi III Plus Users Guide 131 A label format was sent to the printer but not recognized. The DA T A light flashes but no printing occurs. The printer fails to c alibrate or detect the t op of the label. 3ULQWHU'LDJQRVWLFV Self tests give information about the condition of the printer . T he most commonly us[...]

  • Seite 152

    132 Zebra Xi III Plus Users Guide Appendixes T roubles hootin g $GGLWLRQ DO3UL QWHU 6HOI7HVWV These self tests produce sample printouts and provide specific information that help determine the operating conditions for the printer . Each self test is enabled by pressing a specif ic front panel key or combination of keys while turning the P [...]

  • Seite 153

    Appendixes T roubles hootin g Zebra Xi III Plus Users Guide 133 A configuration label prints. The printer configuration ca n be changed by pe rforming a calibration procedure. See T o print a configuration l abel, complete the se steps: on page 18 for further information about the configuration procedure.[...]

  • Seite 154

    134 Zebra Xi III Plus Users Guide Appendixes T roubles hootin g 3$86(6 HOI7HVW This self test can be used to provide the test labels required when making adjustments to the printer’ s mecha nical assemblies. S ee the sample prin tout below . 7RS HUIR UP D3$ 86( VHOI WHV W FRP SOH WHW KHVH VW HSV  1. T urn off t[...]

  • Seite 155

    Appendixes T roubles hootin g Zebra Xi III Plus Users Guide 135 )(('6HOI7HVW This test helps you choose the best darkness setting for your printer . 7RS HUIRUP D)( ('VHOIW HVWFR PSOHWH WKHV HVWHS V 1. T urn off the printer . 2. Press and hold FEED while turning the power On ( I ). Ho l d FEED until t[...]

  • Seite 156

    136 Zebra Xi III Plus Users Guide Appendixes T roubles hootin g )(('DQG3$86(6HOI7HVW  Performing this self test temporarily resets the printer configuration to the factory default values. These values are active only until power is turned off unless you save them permanentl y in memory . 7RS HUIRU PD )(('D QG[...]

  • Seite 157

    Zebra Xi III Plus Users Guide 137 ,QGH [ A about this document vii adjustments printhead pressure, 121 upper media sensor , 21 applicator port setting, 83 B backfeed setting, 79 bar codes (specifications), 93 baud setting, 72 black mark sensor positioning, 22 C calibration, 9 CANCEL Self T est, 132 cleaning exterior , 1 13 interior , 1 13 printhead[...]

  • Seite 158

    Index 138 Zebra Xi III Plus Users Guide format prefix setting, 76 front panel lights, 57 fuse replacement, 1 18 H head resistor value setting, 81 head test count setting, 80 host handshake setting, 73 I idle display setting, 87 initialize c ard setting, 67 initialize fla sh memory setting, 68 inspection, 2 interconnections RS-232, 42 IP settings ad[...]

  • Seite 159

    Index Zebra Xi III Plus Users Guide 139 print width setting, 62 printer configuration, 91 diagnostics, 131–136 protocol setting, 73 R related documents x removal of label liner , 33 reporting damage, 2 resynch mode setting, 85 ribbon removal, 35 ribbon length setting, 65 RS-232 interconnections, 42 RS-422/RS-485 interconnections, 45 R TC settings[...]

  • Seite 160

    140 Zebra Xi III Plus Users Guide[...]

  • Seite 161

    3ULQ WHU6 RIWZDUH DQG) LUPZDUH /L FHQVH  $JUHHPHQW YOU SHOULD CAREF ULL Y READ THE FOLLOWING TERMS AND CONDITIONS O F THIS ZEBRA TECHNOLOGIES P RINTER SOFTW ARE AND FIRMW ARE LICENSE AGREEMENT (PSFLA) BEFORE USING THE PRINTER WHICH IS ENCLOSED OR OTHER WISE ASSOCIA TED WITH THIS AGREEMENT . IF YOU DO NOT AGREE WITH THES E TERMS AN[...]

  • Seite 162

    Printer Sof tware and Firmware License Agreement  St orage/Ne twork Use. Y ou may also store or install a copy of the SOFTW ARE and FIRMW A RE on a storage device, such as a network se rver , used only to RUN the SOFTW ARE and FIRMW ARE on your other PRINTERS over an internal network; however , you must acquire and de dicate a license for e ach [...]

  • Seite 163

    Printe r Software an d Firm ware License Agre ement FIRMW ARE offered to you by ZEBRA shall be considered part of the SOFTW ARE and/or FIRMW ARE a nd subject to the terms of thi s PSFLA (unless this PSFLA is superseded by a further PSFLA accompanying such replacement or modified version of or upgrade to the SOFTW ARE and/or FIRM W ARE). In the even[...]

  • Seite 164

    Printer Sof tware and Firmware License Agreement 7. EXPOR T RESTRICTIONS. Y ou agree that you will not export or re-export the SOFTW ARE and/or FI RMW ARE, any part thereof, or a ny process or service that is the direct product of the SOFTW ARE and/or FIRMW ARE (the foregoing collectively referred to as the RESTRICTED COMPONENTS), to any country , [...]

  • Seite 165

    Printe r Software an d Firm ware License Agre ement USE OF OR INABI LITY TO USE THE SOFTW ARE OR FIRMW ARE, WHETHER BASED ON CONTRACT , TOR T , NEG LIGENCE, STRICT LIABILITY OR OTHER W ISE, EVEN IF ZEBRA O R ANY SUPP LIER HAS BEEN ADVISED OF THE POSSIBIL ITY OF SUCH DAMAGES. TH IS EXCLUSION OF DAMAGES S HALL BE EFFECTIVE EVEN IF ANY REMEDY F AILS O[...]

  • Seite 166

    Printer Sof tware and Firmware License Agreement United St ates of Amer ica, then local law may apply . If any pr ovision of this PSFLA is held invalid, the remainder of this PSFLA sha ll continue in full force and effect. 12. QUESTIONS. Should you have any questions, or if you desire to contact ZEBRA for any reason, please contact the ZEBRA subsid[...]

  • Seite 167

    [...]

  • Seite 168

    =HEUD7 HFKQRORJLHV 333 Cor porate W oods Parkway V ernon Hills, Illinois 60061.3109 U. S. A. T elephone : +1 847.634.670 0 Facsimile: +1 847.913.8766 =HEUD7 HFKQRORJLHV(XURSH/LPLW HG Zebr a Hous e The V alley C entre, Gordon Road High W ycombe Buck ingh ams hire HP 13 6EQ , UK T elephone : +44 (0) 1 494 472872 Facsimile: +4 4 (0) 149[...]