Zanussi ZU 7155 Bedienungsanleitung

2222681-34 INSTRUCTION BOOKLET REFRIGERA TOR ZU 7155[...]

Instructions for the User Important Safety Instructions 3 Description of the Appliance 4 Operation 5 Before use 5 Setting the temperature 5 Fresh food refrigeration 5 The door shelves 5 Normal Operating Sounds 5 Health and Safety Guidelines 6 Cool Check Guide 7 Positioning of the Cool Check 7 If the Cool Check Shows too W arm 7 Defrosting 7 Mainten[...]

3 IMPORT ANT SAFETY INSTRUCTIONS Prior to Installation ■ Check the appliance for transport damage. Under no circumstance should a damaged appliance be installed. In the event of damage please contact your retailer . Installation ■ This appliance is heavy . Care should be taken when moving it. ■ It is dangerous to alter the specifications or a[...]

DESCRIPTION OF THE APPLIANCE A - Dairy compartment B - Movable shelf C - Bottle storage shelf D - Airduct exit E - Air inlet filter F - Salad bins G - Storage shelves with cool check temperature guide H - Thermostat control 4[...]

5 OPERA TION Before use Remove all securing tapes. W ash inside the appli- ance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water). Do not use soap or deter- gent as the smell may linger . Dry thoroughly . Setting the temperature The temperature inside the refrigerator is regulated by a thermostat with 6 temperature positions [...]

6 HEAL TH AND SAFETY GUIDELINES Because of consumer demand, preservatives have been removed from many pre-prepared foods. This together with the changes in shopping habits to a once-a-week shop, mean that safe handling and storage of food is even more important than ever . The following tips should help you to ensure that the food in your home is i[...]

7 The guide consists of a temperature sensitive strip sealed in a shelf trim. When the fridge is operating at the safe temperature to store food the guide will appear black. If the tem- perature rises above this level the guide will show the words TOO W ARM. Positioning of the Cool Check The shelf with the cool check temperature guide must be place[...]

S.I.012 2 1 a b DEFROSTING The refrigerator automatically defrosts every time the compressor stops. The water is discharged, via the pipe, into a tray located at the back of the appliance above the compressor , where it evaporates. Important T o avoid defrost water overflowing and drip- ping onto the food in the fridge, periodically clean the water[...]

Changing the light bulb Should the interior light fail to work, first switch off the appliance and disconnect from the electricity supply , then replace the bulb as follows: 1. Unscrew the light cover and then pull it outward by pressing as shown in the figure. Unscrew the bulb and replace it with a new 15 watt bulb (available from your nearest Zan[...]

10 SER VICE AND SP ARE P ARTS In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Zanussi Service Force Centre by telephoning:- 08705 929929 Y our telephone call will be automatically routed to the Service Force Centre covering your post code area. The addresses are listed on the follo[...]

11[...]

12[...]

13 Standard guarantee conditions We, Zanussi, undertake that if within 24 months of the date of purchase this Zanussi appliance or any part there- of is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour , materials or carriage on condition that: ■ [...]

TECHNICA L SPECIFIC A TIONS Positioning For this appliance to work e f ficientl y , it should be located away from heat sources, e.g. cookers, radia- tors, boilers, direct sunlight etc. Best performance is obtained with ambient temperature between +10°C and +32°C. For building-in and door reversibilit y , if necessar y , refer to the relevant ins[...]

15 ELECTRICAL CONNECTION W ARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed. If the plug that is fitted to your appliance is not suit- able for your socket outlet, it must be cut off and the appropriate plug fitted. Remove the fuse from the cut off plug. The cut off plug shou[...]

BUILDING-IN INSTRUCTIONS Before carrying out any work, remove the plug from the power socket. Grid preparation Remove the grid from the appliance pulling it towards you with hands. Right door opening: Remove the left side (A) of the grid cutting it from the rear (see figure, a). Left door opening: Remove the right side (B) of the grid cutting it fr[...]

17 Building the appliance in under a worktop The dimensions of the recessed installation area must correspond with those indicated in the figure. The appliance could be inserted between two units (a) or as an end unit (b). The plug socket necessary for connection of the appli- ance to the electricity supply should be positioned, so that the plug is[...]

18 The appliance is equipped with adjustable support feet. T o adapt the appliance to the height of the instal- lation area (max 870 mm), screw in, or screw out the feet situated to the four bottom corners. Separate parts A, B, C, D as shown in the figure. Place guide (A) on the inside part of the furniture door , up and down as shown in the figure[...]

19 S.I.007 S.I.008 580 a = 100 b = 150 25 ÷ 80 A = 820 B = 870 25 PR168 PR167/1 D B Should the lining up of the furniture door be neces- sary , use the clearance of slots. At the end of operations, it is necessary to check if the door of the furniture closes properly . Fix cover (D) on guide (B) until it clips into place. Fitting the plinth Import[...]

© Electrolux Household Appliances Limited 2000[...]