Zanussi ZKC 49/3 Bedienungsanleitung

REFRIGERA TOR FRIGORÍFICO ZKC 49/3 INSTRUCTION BOOKLET MANUAL DE INSTRUÇÕES 2222 257-06/2[...]

2 W ARNINGS General Safety ª This appliance is designed to be operated by adults. Children should not be allo wed to tamper with the controls or play with the product. ª It is dangerous to alter the specifications or modify this product in any w ay . ª Care must be taken to ensure that the appliance does not stand on the electrical supply cable[...]

3 CONSERV A TION En vironment Pr otection ª This appliance does not contain gasses which could damage the ozone layer , in either its refrigerant cir cuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rub bish. A v oid damaging the cooling unit, especially at the rear near the heat exchanger . Inf[...]

4 CONTENTS Description of the appliance 5 Installation 6 ª Positioning 6 ª Before using 6 ª Location 7 ª Door re versibility 8 ª Changing the opening direction of the door (freezer compartment) 9 ª Fitting a decorati ve door panel 10 ª The electrical connections 13 T echnical specification 14 Operation 15 ª Setting the temperature 15 ª St[...]

5 DESCRIPTION OF THE APPLIANCE A - Dairy compartment B - Shelf with egg tray C - Bottle storage shelf D - Salad drawers E - Glass shelf (for storing meat) F - Cool check temperature guide G - Storage shelves H - Thermostat control I - freezer compartment I A B C H G E D F GB[...]

6 INST ALLA TION W arning IF YOU ARE DISCARDING AN OLD APPLIANCE THA T HAS A LOCK OR CA TCH ON THE DOOR, Y OU MUST ENSURE THA T IT IS MADE UNUSABLE T O PREVENT YOUNG CHILDREN BEING TRAPPED INSIDE. P ositioning This appliance is designed to operate in ambient temperatures between 16 ° C (60 ° F) and 32 ° C (90 ° F). It should be located in a dry[...]

7 Location This appliance is designed to be built-in to a space having the dimensions gi ven in Fig. 1. The height of the appliance can be altered if required by means of adjustable feet situated at its base (Fig. 2). Fig. 1 Fig. 2 100-170 596 820-870 547 550 600 820 870 D506 D507[...]

8 Door rever sibility Remov e the two scre ws which fix the upper hinge to the door . Carefully lean the appliance on its back and remov e the plastic insert (Fig. 3). Remov e the two scre ws which fix the lo wer hinge to the door . Remov e the four screws which fix the lo wer hinge to the base of the appliance and remov e the hinge itself; be v[...]

9 Changing the opening direction of the door (freezer compar tment) Having changed the opening direction of the appliance door , it is advisable to also change the opening direction of the freezer compartment door . T o do this, proceed as follo ws: Unscre w the two fixing scre ws to remov e the lower hinge from the door (Fig. 5). Remov e the free[...]

10 Fitting a decorative door panel Important: The components needed to fit the decorative panel ha ve been pre-fitted on the appliance. The brackets ar e secured to the panel by means of the 7 Ø 3.5x13 screws supplied. Bef ore starting to fit the panel, r emove the lar ge top bracket by unscr ewing the screws and adjusting pins pre-fitted on t[...]

11 Insert the adjusting pins (B-Fig. 10) into their locations in the door and scre w them in. Hook the decorati ve panel onto the top part of the door , inserting the pins (B) (on the door) into the elongated holes (1) (in the top bracket fitted to the panel) (Fig. 11). Insert the securing scre ws (C) through elongated holes (2) and fix the panel[...]

12 Once the door has ben correctly aligned, tighten the holding nuts on the fixing brackets and attach the appliance to the adjacent units and the bottom of the work surface (Fig. 14). If the appliance has been fitted into a space 820 mm high and the maximum height of the base plate is 100 mm, fit the front cov er plate by pushing the two vertic[...]

13 The electrical connections W ARNING: THIS APPLIANCE MUST BE EAR THED. The manufacturer declines any liability should this safety measure not be obser ved. If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut of f and the appropriate plug fitted. Remov e the fuse from the cut off plug. The cut of f[...]

14 TECHNICAL SPECIFICA TIONS * This figure is based on standard test results in accordance with European Standard EN153. Actual consumption will depend on ho w the appliance is used and where it is located. PO WER SUPPL Y V OL T A GE AND FREQUENCY TO T AL PO WER ABSORBED A VERA GE DAIL Y UNITS ELECTRICITY* 220-240 V / 50 Hz 110 W 1.00 kWh GR OSS C[...]

15 OPERA TION Setting the temperature The temperature inside the refrigerator is regulated by a thermostat with 6 temperature positions and one «OFF» ( O ) position. Position 1 = minimum coldness Position 6 = maximum coldness T urn the thermostat dial to the required position; the intermediate position is usually the most suitable (3- 4). The the[...]

16 HEAL TH AND SAFETY GUIDELINES Because of consumer demand, preser vativ es hav e been remo ved fr om many pre-pr epared f oods. This together with the changes in shopping habits to a once-a-week shop, mean that safe handling and storage of f ood is even mor e important than ever . The f ollowing tips should help y ou to ensure that the f ood in y[...]

17 Fresh f ood refrigeration T o obtain the best performance, do not store warm food or e vaporating liquids in the refrigerator; do cov er or wrap the food, particularly if it has a strong flav our . Do not cov er the shelves with an y protecti ve material, such as paper , cardboard or plastic, which may obstruct the air circulation through them.[...]

18 Cool chec k temperature guide This model has a cool check temperature guide fitted to a shelf in the fridge compartment. The guide is designed to sho w whether the fridge is operating at safe temperatures for all food types. The guide consists of a temperature sensiti ve strip sealed in the shelf trim. When the fridge is operating at the safe t[...]

19 Defr osting The refrigerator compartment e vaporator is automatically defrosted e very time the compressor stops. The w ater drains out through a channel (Fig. 20) into a bo wl located at the base of the back of the appliance, where it e vaporates. In the compartment, the frost must be remov ed using the plastic scraper provided whene ver a thic[...]

20 MAINTENANCE AND CLEANING Before any maintenance or cleaning w ork is carried out, DISCONNECT the appliance from the ELECTRICITY supply . Internal c leaning Clean the inside and accessories with warm water and bicarbonate of soda (5ml to 0.5 litre of water). Rinse and dry thoroughly . NEVER USE DETERGENTS, ABRASIVE PO WDERS, HIGHL Y PERFUMED CLEA[...]

21 WHA T HAPPENS IF SOMETHING GOES WRONG? Before contacting your local Zanussi Service Centre, check the follo wing points: If, after the abov e checks, there is still a fault, call your local Zanussi Service Centre, whose address can be found in the accompanying Customer Care Booklet, and can also be found in your local telephone directory under ?[...]

22 PEACE OF MIND FOR TWENTYFOUR MONTHS Zanussi standar d guarantee conditions This guarantee is in addition to your statutory and other legal rights which will not be e xcluded or in any way diminished by the return of this guarantee card. W e, Zanussi Ltd., undertake that if, within twentyfour months of the date of the purchase, this ZANUSSI appli[...]