Yamaha CX-A5000 Bedienungsanleitung

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162

Zur Seite of

Richtige Gebrauchsanleitung

Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung Yamaha CX-A5000 an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von Yamaha CX-A5000, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.

Was ist eine Gebrauchsanleitung?

Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung Yamaha CX-A5000 die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.

Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung Yamaha CX-A5000. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.

Was sollte also eine ideale Gebrauchsanleitung beinhalten?

Die Gebrauchsanleitung Yamaha CX-A5000 sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts Yamaha CX-A5000
- Den Namen des Produzenten und das Produktionsjahr des Geräts Yamaha CX-A5000
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts Yamaha CX-A5000
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen

Warum lesen wir keine Gebrauchsanleitungen?

Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von Yamaha CX-A5000 zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von Yamaha CX-A5000 und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service Yamaha finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von Yamaha CX-A5000 zu überspringen, wie es bei der Papierform passiert.

Warum sollte man Gebrauchsanleitungen lesen?

In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts Yamaha CX-A5000, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.

Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von Yamaha CX-A5000 widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.

Inhaltsverzeichnis der Gebrauchsanleitungen

  • Seite 1

    English AV Pre-Amplifier Owner’s Manual Read the supplied booklet “Safety Brochure” before using the unit.[...]

  • Seite 2

    En 2 CO N T E N T S Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 FEATURES 6 What you can do with the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Part names and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

  • Seite 3

    En 3 Playing back music stored on a USB storage device . . . . . . . . . . . . . . . 72 Connecting a USB storage device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Playback of USB storage device content s . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

  • Seite 4

    En 4 Error indications on the front display . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 Audio information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

  • Seite 5

    Accessories En 5 Ac cessories Check that the following accessories are supplied with the product.  Remote control  Batteries (x4)  AM antenna  FM antenna *One of the abo ve is supplie d depending on the region of purchase.  YPAO microphone  Microphone base *Using for angle mea surement during YPAO.  Power cable *The supplied po[...]

  • Seite 6

    FEATURES ➤ What you can do with the unit En 6 FEA TURES Wha t you can do with the unit Speakers BD /D V D playe r HDMI Control Audio/Video TV remote control Audio (via power amplifier ) HDMI Control Au di o Audio/Video TV Sequential operat ion of a TV , A V receiver , and BD/D VD play er (HDMI Control) . p.150 Supports 2- to 11-channel pre-out an[...]

  • Seite 7

    FEATURES ➤ What you can do with the unit En 7 F ull of useful func tions! ❑ Connecting various devices (p .32) A number of HDMI jacks and various input/output jacks on the unit allow you to connect video d evices (such as BD/DVD players), audio de vices (such as CD players), game consoles, camcorders, and other devices. ❑ Playing back TV audi[...]

  • Seite 8

    FEATURES ➤ What you can do with the unit En 8 The excitement of a concer t hall and the powerful sense of being inside a movie - we all want to enjoy these experiences in our own living room. Y amaha has pursued the fulfillment of these desires for more than 20 years, and this fulfillment has now taken shape as the Y amaha A V receivers. Wha t is[...]

  • Seite 9

    FEATURES ➤ What you can do with the unit En 9 High-resolution music enhancer Hi-bit high-sampling extensio n up to 96 kHz / 24-bit can be applied to lossless 44.1/48 kHz content such as from a CD (2-channel PCM) or a FLAC file for further heightening of the musicality in the original content (p.93) Before pr ocessing After processing High-qualit [...]

  • Seite 10

    FEATURES ➤ Part names and functions En 10 Fro nt p an el 1 MAIN ZONE z key T urns on/of f (standby) the u nit. 2 Standby indicator Lights up when the unit is in standby mode under any of the following conditions. • HDMI Control is enabled (p.113) • Standby Through is enabled (p.114) • Network Standby is enabled (p.115) • An iPod is being [...]

  • Seite 11

    FEATURES ➤ Part names and functions En 11 ■ Inside of the front panel door 9 ON SCREEN key Displays the on-screen menu on th e TV . 0 Menu operations keys Cursor ke ys Select a menu or a parameter . ENTER Confirms a selected item. RETURN Returns to the previous screen. A OPTIO N ke y Displays the option menu (p.90). B DISPLA Y ke y Displays sta[...]

  • Seite 12

    FEATURES ➤ Part names and functions En 12 Fr ont display (indicators) 1 HDMI Lights u p when HDMI s ignals are being in put or output . IN Lights up when HDMI signals are being input. OUT1/OUT2 Indicates the HDMI OUT jacks curr ently out putting an HDMI signal. 2 STEREO Lights up when the unit is r eceiving a stereo FM radio signa l. TUNED Lights[...]

  • Seite 13

    FEATURES ➤ Part names and functions En 13 Rear panel 1 PHONO jacks For connecting to a turntable (p.34). 2 DC OUT jack For connecting to an optional accessory . 3 NETWORK jack For connecting to a network (p.37). 4 A V 1–4 jacks For connecting to video/audio playback devices and inputting video/audio signals (p.32 ). 5 A V OUT jacks For outputti[...]

  • Seite 14

    FEATURES ➤ Part names and functions En 14 E A UDIO 1–3 jacks For connecting to audio playback devices and inputting audio signals (p.34). F A UDIO 4 (XLR) jacks For connecting to an audio playback device and inputting audio signals (p.34). G ANTENNA jacks For connecting to FM and AM antennas (p. 36). H MUL TI CH INPUT jacks For connecting to a [...]

  • Seite 15

    FEATURES ➤ Part names and functions En 15 Remote control 1 Remote c ontr ol s ignal transmitter T ransmits infrar ed signals. 2 SOURCE z key T urns on/off an external device. SOURCE/RECEIVER key Changes the device (the unit or external device) that is operated with the r emote contro l (p.130). Y ou can operate the unit when this key lights up in[...]

  • Seite 16

    FEATURES ➤ Part names and functions En 16 ■ Inside of the remote con trol c ov er I Sound m ode ke ys Select a sound mode (p.55). J INFO key Selects the information displayed on the fron t display (p.89). K Numeric keys Let you enter numerical values , such as radio frequen cies. L ZONE key Changes the zone that is contr olled by the remote con[...]

  • Seite 17

    PREPARATIONS ➤ General setup procedure En 17 PREP ARA TIONS This completes all the preparations. Enjoy playing movies, music, ra dio and other content with the unit! General se tup proc edure 1 Placing speakers (p .18) Select the speaker layout and con nect the speakers to the power amplifier . For d etails on speaker connections, refer to the in[...]

  • Seite 18

    PREPARATIONS ➤ Placing speakers En 18 The unit has 11.2-channel pre-amplifiers. Y ou can connect 2- to 11-channel speakers (via a power amplifier) and up to 2 subwoof ers t o cr eate the fa vorite acoustic space in your roo m. Y ou can also apply multi-zone configurat ions to enhance your system (p.82). Functions of each speaker • Use “Ideal [...]

  • Seite 19

    PREPARATIONS ➤ Placing speakers En 19 Basic speaker c onfiguration ■ Placing speakers in your r oom Depending on the number of speakers, place the speakers and subwoof er in your room. This section describes the repr esentative s peaker layout examples. ❑ 11.2-channel system This speaker system brings out the full performance of the unit and [...]

  • Seite 20

    PREPARATIONS ➤ Placing speakers En 20 ❑ 9.2-channel system (using surround back speak ers) This speaker system uses the front presence speakers to pr oduce a natural 3-dimensional sound field, a nd also allows you to enjoy extended surround sounds using the surround back speakers. • This speaker system creates rear Virtual Prese nce Speak er [...]

  • Seite 21

    PREPARATIONS ➤ Placing speakers En 21 ❑ Fr ont 5.1-channel system This speaker system uses the front presence speakers to pr oduce a natural 3-dimensional sound field, and creates the vir tual surr ound speakers using the front speakers to allow you to enjoy multi-channel surround sound (Virtual CINE MA DSP). ❑ 2.1-channel system Even when no[...]

  • Seite 22

    PREPARATIONS ➤ Input/output jacks and cables En 22 ■ Video/audio jacks ❑ HDMI jacks T ransmit digital video and digi tal sound through a single jack. Use an HDMI cable. • Use a 19-pin HDMI cable with the HDMI logo. We recommend using a cable less than 5.0 m (16.4 ft) long to prev ent signal qua lity degradation. • The unit’ s HDMI jacks[...]

  • Seite 23

    PREPARATIONS ➤ Input/output jacks and cables En 23 ❑ XLR jack s T ransmit analog audio signals. Use an XLR balanced cable. XLR input jacks Match the pins and inser t the “male” connector of the XLR balanced cable until you hear a click. • When disconnecting the cable from the unit, hold down the PUSH button on the unit and then pull the c[...]

  • Seite 24

    PREPARATIONS ➤ Connecting the power amplifier and subwoofers En 24 Connecting a pow er amplifier Connect the input jacks of your power amplifier to the PRE OUT jacks of the unit so that the audio source selected on the unit can be out put to the power amplifier for playback. Select a balanced (XLR) or an unbalanced (RC A) connection for each chan[...]

  • Seite 25

    PREPARATIONS ➤ Connecting the power amplifier and subwoofers En 25 ■ Unbalanced connec tion Depending on the speaker system you want to use, c onnect the corresponding PRE OUT (RCA) jacks of the unit to the amplif ier with audio pin cables (RCA unbalanced cables ). • We recommend using a power amplifier with v olume control bypass (or without[...]

  • Seite 26

    PREPARATIONS ➤ Connecting a TV En 26 Connect a TV to the unit so that video input to the unit can be outp ut to the TV . Y ou can also enjoy playback of TV audio on the unit. The connection method varies depending on the functions and video input jacks available on your TV . Refer to the instruction manual of the TV and choose a co nnection metho[...]

  • Seite 27

    PREPARATIONS ➤ Connecting a TV En 27 ❑ Necessary settings T o use HDMI Control and ARC, you need to configure the following settings. For details on settings a nd operating your TV , refer to the instruction manual for the TV . 1 After connecting external devices (such as a TV and pla yback devices) and the po wer cabl e to the unit, turn on th[...]

  • Seite 28

    PREPARATIONS ➤ Connecting a TV En 28 ■ Connection Method 2 (HDMI Control-compatible TV ) Connect the TV to the unit with a n HDMI cable and an audio cable (digital optical or stereo pin cable). • The following e xplanation is based on the assumption that y o u ha ve not changed the “HDMI” parameters (p.113) in the “Setup” menu. • HD[...]

  • Seite 29

    PREPARATIONS ➤ Connecting a TV En 29 3 Configure the settings for HDMI Contr ol. a Enable HDMI Contro l on the TV and playback de vi ces (such as a HDMI Control-compatib le BD/D VD play er). b T ur n off the TV’ s main power and then tur n off the unit and pla yba c k devices. c T ur n on the unit and playback devices and then tur n on the TV .[...]

  • Seite 30

    PREPARATIONS ➤ Connecting a TV En 30 ■ Connection Method 4 ( T V wit hout HDMI input jacks) Depending on the video input jacks available on your TV , choose one of the following connections. If you select “AUDIO 1” as the input source by pressing AUDIO 1 or SCENE(TV) on the remote control, the TV audio will be played back on the unit. • I[...]

  • Seite 31

    PREPARATIONS ➤ Connecting a TV En 31 ■ Connecting another T V or a projector The unit has two HDMI output jacks. If you connect another TV or a pr ojector to the unit with an HDMI cable, you c an switch the TV (or projector) to be used for watching videos with the remote control (p.52). • HDMI Control is not av ailable on the HDMI OUT 2 jack.[...]

  • Seite 32

    PREPARATIONS ➤ Connecting playback devices En 32 The unit is equipped with a variet y of inpu t jacks including HDMI input jacks to allow you to connect different types of playback devices. For information on how to connect an iPod or a USB storage de vice, see the following pages. • Conne cting an iPod (p.68) • Conne cting a USB storage devi[...]

  • Seite 33

    PREPARATIONS ➤ Connecting playback devices En 33 ■ S -video connection Connect a video device to the unit with an S- video cable and an audio cable (digital coaxial, digital optical or stereo pin cable). Choose a set of input jacks (on the unit) depending on the audio output ja cks available on your video device. If you select the input source [...]

  • Seite 34

    PREPARATIONS ➤ Connecting playback devices En 34 Co nnecting audio devices (such as CD pla yers) Connect audio devices such as CD p layers, MD players, and a turntable to the unit. Depending on the audio output jacks availabl e on your audio device, choose one of the following connections. • The following e xplanation is based on the assumption[...]

  • Seite 35

    PREPARATIONS ➤ Connecting playback devices En 35 Co nnecting to the jack s on the front panel Use the VIDEO AUX jack to temporarily connect a playback device to the u nit. Use the USB jack to connect an iPod o r a USB storage device. For details, see “Connecting an iPod” (p.68) or “Connecting a USB storage d evice” (p.72). Before making a[...]

  • Seite 36

    PREPARATIONS ➤ Connecting the FM/AM antennas En 36 ❑ Composite video/analog stereo/digital optical c onnec tion Connect a playback device (such as game consoles and camcorders) to the unit with a video pin cable and an audio cable (digital optical or stereo pin cable). If you select “V -AUX” as the in put sour ce by p r essing V-AUX, the vi[...]

  • Seite 37

    PREPARATIONS ➤ Connecting to a network En 37 Assembling the AM antenna Connecting the AM antenna • Unwind only the length of cable needed from the AM antenna unit. • The wires of the AM antenna have no polarity . Connect the unit to your router with a commercially-available STP network cable (CA T -5 or higher straight cable). Y ou can enjoy [...]

  • Seite 38

    PREPARATIONS ➤ Connecting other devices En 38 Co nnecting record ing devic es Y ou can conn ect video/audio recor ding devices to the A V OUT jacks. These jacks output video/audio signals selected as the input. • The A V OUT jacks cannot output video/audio signals input through the HDMI or COMPONE NT VIDEO jack s. • Be sure to use the A V OUT[...]

  • Seite 39

    PREPARATIONS ➤ Connecting the power cable En 39 Connecting a device c ompatible with the trigger function The trigger function can control an external d evice in conjunction with operating the unit (such as powering on/off and input se lection). If you have a power amplifier or a Y amaha subwo ofer that supports a system connection or a device wi[...]

  • Seite 40

    PREPARATIONS ➤ Selecting an on-screen menu language En 40 Select the desired on-screen menu language from English, Japanese, French, German, Spanish, Russian, Italian and Chinese. 1 Press RECEIVER z to turn o n the unit. 2 T urn on the TV and switc h the TV inpu t to display video fr om the unit. 3 Press ON SCREEN. 4 Use the cursor keys to select[...]

  • Seite 41

    PREPARATIONS ➤ Optimizing the speaker settings automati cally (YPAO) En 41 The Y amaha Parametric room Acoustic Optimizer (YP AO) function detects speaker connections, measures the distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balanc e and acoustic parameters, to suit your[...]

  • Seite 42

    PREPARATIONS ➤ Optimizing the speaker settings automati cally (YPAO) En 42 The f ollo wing screen appears on th e TV . • T o cancel the oper ation, disconnect the YP AO microphone before starting the measurement. 6 If desired, select the me asuring options. a Use the cursor k eys to select “Multi P osition” (p .42) or “Angle” (p .43) an[...]

  • Seite 43

    PREPARATIONS ➤ Optimizing the speaker settings automati cally (YPAO) En 43 ❑ Angle Enables/disables the angle measurement. Settings a b a a b c d e c d de bac Multi measure (5 listening positions) Multi measure (2 listening positions + front/back) Multi measure (1 listening position + front/back/left/right ) Single measure Ye s Enables the angl[...]

  • Seite 44

    PREPARATIONS ➤ Optimizing the speaker settings automati cally (YPAO) En 44 Measuring a t one liste ning positio n (single measure) When “Multi Position” is set to “No”, follow the procedure below for measurement. • Do not stand between the speakers and the YP AO microphone during the measurement process (about 5 minutes). • Move to th[...]

  • Seite 45

    PREPARATIONS ➤ Optimizing the speaker settings automati cally (YPAO) En 45 c Press E NTER to start the first angle measure ment. The f ollowing scre en appear s on the TV when the first ang le measuremen t finishes . d In the sa me w ay , perform the angle measu rement for the positions “2” and “3”. The f ollowing screen a ppears on the T[...]

  • Seite 46

    PREPARATIONS ➤ Optimizing the speaker settings automati cally (YPAO) En 46 Measuring at multiple list ening positions (multi measure) When “Multi Position” is set to “Y es”, follow the procedure below for measurement. • Do not stand between the speakers and the YP AO microphone during the measurement process. It takes about 15 minutes t[...]

  • Seite 47

    PREPARATIONS ➤ Optimizing the speaker settings automati cally (YPAO) En 47 4 Perf orm the angle measureme nt. a Use the cur sor k eys to select “YES” a nd press ENTER. Select “NO” to ca ncel the angl e measurement. b Place the supplied microph one base at the l istening position y ou will be se ated most fr equently and set the YP AO micr[...]

  • Seite 48

    PREPARATIONS ➤ Optimizing the speaker settings automati cally (YPAO) En 48 7 Disconnect the YP A O micr op hone fr om the unit. This completes optimization of the speaker settings. Checking the meas urement r esults Y ou can c heck the YP AO me asur eme nt r esu lts. 1 After the measurement, use the cursor keys to select “Result” and press EN[...]

  • Seite 49

    PREPARATIONS ➤ Optimizing the speaker settings automati cally (YPAO) En 49 Reloading the previous Y P A O adjustments When the speaker settings you have configured manually are not suitable, follow the procedure below to discard the manual settings and reload the previous YP AO adjustments. 1 In the “Setup” menu, select “Speaker”, “A ut[...]

  • Seite 50

    PREPARATIONS ➤ Optimizing the speaker settings automati cally (YPAO) En 50 Error messages If any error message is displayed during the meas urement, resolve the problem and perform Y P AO again. Error messag e Cause Remedy E-1: No Front SP Front speakers are n ot detected. Follow the on-scr een instructions to exit YP AO, turn off t he unit and p[...]

  • Seite 51

    PREPARATIONS ➤ Optimizing the speaker settings automati cally (YPAO) En 51 W arning messages If a warnin g message is displayed after the measurement, you can still save the measurement r esults by following on-screen inst ructions. However , we recommend you per form YP AO again in or der to use the unit with the optimal speaker settings. War ni[...]

  • Seite 52

    PLAYBACK ➤ Basic playback procedure En 52 PLA Y BA CK 1 T urn on the external devices (such as a TV or BD/D VD player) connected to the unit. 2 Use the input selection keys to select an input sour ce . 3 Start playback on the external de vice or select a radio station. Refer to the instruc tion manual for the e xter nal device. Fo r details o n t[...]

  • Seite 53

    PLAYBACK ➤ Selecting the input source and favori te sett ings with one touch ( SCENE) En 53 The SCENE function allows you to select the assigned input sour ce, sound program, HDMI output and variou s settings with just on e touch. Y ou can use up to 12 scenes to register your favorite se ttings and switch them depending on a playback source. 1 Pr[...]

  • Seite 54

    PLAYBACK ➤ Selecting the input source and favori te sett ings with one touch ( SCENE) En 54 C onfiguring scene assignments 1 Set the unit to t he condition (suc h as input sour ce and sound pr ogram) that y ou want to assign to a scene. 2 Hold down the desired SCENE ke y until “SET Complete” appears on the front displa y . 3 If you want to co[...]

  • Seite 55

    PLAYBACK ➤ Selecting th e sound mode En 55 The unit is equipped with a variety of sound programs and surround decoders that allow you to enjoy playback sources with your favorite sound mode (such as sound field effect or stereo playback). ❑ Selecting a sound program suitable for movies • MOVIE THEA TER category (p.57): Press MOVIE repeatedly [...]

  • Seite 56

    PLAYBACK ➤ Selecting th e sound mode En 56 Enjoying stereosc opic sound fields (CINEMA DSP HD) The unit is equipped with a variety of sou nd pr o grams that utilize Y amaha’ s original DSP technology (CINEMA DS P HD³). It allows you to easily create s ound fields like actual movie theaters or concert halls in your room and enj oy natural st[...]

  • Seite 57

    PLAYBACK ➤ Selecting th e sound mode En 57 ■ Sound programs suitable for movies (MOVIE) The following sound programs are optimi zed for viewing video sources, such as movies, TV programs, and games. ❑ MOVIE THEA TER ❑ ENTERT AINMENT Standard This program cr eates a sound field t hat emphasizes the surround feeling without disturbing the ori[...]

  • Seite 58

    PLAYBACK ➤ Selecting th e sound mode En 58 ■ S ound programs suitable for music/stereo playback (MUSIC) The following sound programs are opti mized for listening to music sources. Y ou can also select ster eo playback. ❑ CLASSIC AL ❑ LIVE/CLUB ❑ STEREO • CINEMA DSP HD³ (p.56) and Virtual CINEMA DSP (p .56 ) do not work when “2ch Ster[...]

  • Seite 59

    PLAYBACK ➤ Selecting th e sound mode En 59 Enjoying unp roc essed playback Y ou can pla y back input sources without any sound field effect processing. ■ Playing back in original channels (straight decode) When the straight decode mode is e nabled, the unit produces stereo sound from the front speakers for 2-channel sources such as CDs, and pro[...]

  • Seite 60

    PLAYBACK ➤ Selecting th e sound mode En 60 Enjoying pure high fidelity sound (Pur e Direc t) When the Pure Direct mode is enabled, the unit plays back the selected source with the least circuitry in order to reduce the electrical noise from other circui try (such as the front display). It allows you to enjoy Hi-Fi sound quality . 1 Press PURE DIR[...]

  • Seite 61

    PLAYBACK ➤ Listening to FM/AM radio En 61 Y ou can t une into a radio station by specifying its frequency or selecting from register e d radio stations. • The radio frequencies differ depending on the country or region where the unit is being used. The explanation of this section uses a display with frequencies used in U.K. and Europe models. ?[...]

  • Seite 62

    PLAYBACK ➤ Listening to FM/AM radio En 62 Registering fav orite radio stations (presets) Y ou can register up to 40 radio st ations as presets. Once you have registered stations, you can easily tune into them by selecting their preset numbers. • Y ou can automatically register FM radio stations that have strong signals and HD Radio stations (U.[...]

  • Seite 63

    PLAYBACK ➤ Listening to FM/AM radio En 63 HD Radio™ tuning (U.S.A. model only) HD Radio T echnology is a new technology that enables FM/AM radio stations to broadcast progra ms digitally . Digital broadcasting provides listeners with radicall y improved audio quality and reception as well as new data services. Furthermore, supplemental program [...]

  • Seite 64

    PLAYBACK ➤ Listening to FM/AM radio En 64 ■ Holding HD R adio™ inf ormation displa y Y ou can hold the HD Radio information currently displayed on the TV (playback screen) and front display by using the hold function. 1 When the desired HD Radio information is displa yed, press OPTION. 2 Use the cursor keys to select “Hold/Unhold” (Hold/U[...]

  • Seite 65

    PLAYBACK ➤ Listening to FM/AM radio En 65 ■ Browse scr een 1 Preset station list Displays the list of preset stat ions. Use the cursor keys ( q / w ) t o select a preset station and pr ess ENTER to tune int o it. 2 Preset number 3 Operation menu Press the cursor key ( r ) and the n use the cursor keys ( q / w ) to select an item. Press ENTER to[...]

  • Seite 66

    PLAYBACK ➤ Listening to FM/AM radio En 66 • “Program Service”, “Program T ype”, “Ra dio T ext”, and “Clock Time” are not display ed if the radio station does no t pro vide the Radio Data System service. ■ Receiving traffic information automatically When “TUNER” is selected as the input source, the unit automatically receiv[...]

  • Seite 67

    PLAYBACK ➤ Listening to FM/AM radio En 67 ■ Bro wse screen 1 Preset station list Displays the list of prese t stations. Use the curso r keys ( q / w ) to select a preset station and pr ess ENTER to tune into it. 2 Preset number 3 Operation menu Press the cur s or key ( r ) and then use the cursor keys ( q / w ) to select an item. Press ENTER to[...]

  • Seite 68

    PLAYBACK ➤ Playing back iPod music En 68 Y ou can pla y back iPod music on the unit using a USB cable supplied with the iPod. • An iP od may not be detected by the unit or some features may not be compatib le, depending on the model or software version of the iP od. • T o play back iP od videos on the unit, an Apple Composite A V Cable (not s[...]

  • Seite 69

    PLAYBACK ➤ Playing back iPod music En 69 Playback of iP od con tent Follow the procedure below to operate the iPod contents and start playback. Y ou c an contr o l the iPod with the menu displayed on the TV screen. 1 Press USB to select “USB” as the input source. The browse screen i s disp la yed on the TV . • If playback is ongoing on y ou[...]

  • Seite 70

    PLAYBACK ➤ Playing back iPod music En 70 ■ Playback screen 1 Status in dicators Display the current sh uffle/r epeat se ttings (p.71) and playback stat us (such as play/pause). 2 Playback information Displays the artist name, album name, song title, and elapsed/r emaining time. Use the cursor ke ys ( q / w ) to select scr ollable information. 3[...]

  • Seite 71

    PLAYBACK ➤ Playing back iPod music En 71 ■ Shuffle/repeat settings Y ou can config ur e the shuffle/repeat settings of your iPod. • During simple play , configure the shuffle/repeat settings directly on your iP od or press MODE to display the TV menu screen and then f ollow the procedure below . 1 When “USB” is selected as the input sour [...]

  • Seite 72

    PLAYBACK ➤ Playing back music stored on a USB storage device En 72 Y ou can play back music files stored on a USB storage device on the unit. Refer to the instruction manuals for the USB storage device for more information. The unit supports USB mass storage class de vices (F A T16 or F A T32 format). • The unit suppor ts W A V (PCM format only[...]

  • Seite 73

    PLAYBACK ➤ Playing back music stored on a USB storage device En 73 2 Use the cursor keys to select an item and press ENTER. If a song is selecte d, pla yback starts and the playbac k screen is displa yed. • T o retur n to the pre vious screen, press RETURN. • Files not suppor ted by the unit cannot be selected. • If the unit detects a ser i[...]

  • Seite 74

    PLAYBACK ➤ Playing back music stored on a USB storage device En 74 ■ Playback screen 1 Status in dicators Display the current sh uffle/r epeat se ttings (p.74) and playback stat us (such as play/pause). 2 Playback information Displays the artist name, album name, song title, and elapsed time. Use the cursor ke ys ( q / w ) to select scr ollable[...]

  • Seite 75

    PLAYBACK ➤ Playing back music stored on media servers (PCs/NAS) En 75 Y ou can play back music files stored on your PC or DLNA-compatible NAS on the unit. • T o use this function, the unit and y ou r PC must be connected to the same router (p.37). Y ou can check whether the network parameters (such as the IP address) are properly assigned to th[...]

  • Seite 76

    PLAYBACK ➤ Playing back music stored on media servers (PCs/NAS) En 76 3 Use the cursor keys to select an item and press ENTER. If a song is selecte d, pla yback starts and the playbac k screen is displa yed. • T o retur n to the pre vious screen, press RETURN. • Files not suppor ted by the unit cannot be selected. • If the unit detects a se[...]

  • Seite 77

    PLAYBACK ➤ Playing back music stored on media servers (PCs/NAS) En 77 ■ Playback screen 1 Status in dicators Display the current sh uffle/r epeat se ttings (p.77) and playback stat us (such as play/pause). 2 Playback information Displays the artist name, album name, song title, and elapsed time. Use the cursor ke ys ( q / w ) to select scr olla[...]

  • Seite 78

    PLAYBACK ➤ Listening to Internet radio En 78 Y ou can listen to Internet radio stations from all over the world. • T o use this function, the unit m ust be connected to the Inter net (p .37). Y ou can check whether the network parameters (such as the IP address) are properly assigned to the unit in “Network” (p.123) in the “Information”[...]

  • Seite 79

    PLAYBACK ➤ Listening to Internet radio En 79 ■ Browse scr een 1 Playbac k indicator 2 List name 3 Cont ents list Displays the list of Internet radi o content . Use the cursor keys ( q / w ) to select an item and press ENTER to confi rm the selection. 4 Item number/total 5 Operation menu Press the cursor key ( r ) and the n use the cursor keys ([...]

  • Seite 80

    PLAYBACK ➤ Playing back iTunes/iPod mu sic via a network (AirPlay) En 80 The AirPlay function allows you to play back iT unes/iPod music on the unit via network. • T o use this function, the unit and your PC or iP od must be connected to the same router (p.37). Y ou can check whether the network parameters (such as the IP address) are properly [...]

  • Seite 81

    PLAYBACK ➤ Playing back iTunes/iPod mu sic via a network (AirPlay) En 81 • Y ou can tur n on the unit automatically when star ting pla yback on iT unes or iP od by setting “Network Standby” (p.115) in the “Setup” menu to “On”. • Y ou can edit the network name (the unit’s name on the network) display ed on iT unes/iPod in “Netw[...]

  • Seite 82

    PLAYBACK ➤ Playing back videos/audio in multiple rooms (multi-zone) En 82 The multi-zone function allows you to play back different input sources in the room wher e the u nit is installed (main zone) and in other rooms (Zone2, Zone3 and Zone4). For example, while you are watching TV in the living room (main zone), another person can listen to PC [...]

  • Seite 83

    PLAYBACK ➤ Playing back videos/audio in multiple rooms (multi-zone) En 83 Preparing the multi zone system Connect the device that will be used in other rooms to the unit. ■ Connecting an external amplifier and speakers t o play back audio Connect the external amplifier placed in Zone2 or Zone3 to the unit with a stereo pin cable and connect spe[...]

  • Seite 84

    PLAYBACK ➤ Playing back videos/audio in multiple rooms (multi-zone) En 84 ■ Connecting a video monitor to play back analog videos Connect a video monitor to watch analog videos at Zone 2 or Zone3. Depending on the vid eo input jacks available on your video monitor , choose one of the vide o connection methods. • The video conversion between t[...]

  • Seite 85

    PLAYBACK ➤ Playing back videos/audio in multiple rooms (multi-zone) En 85 ■ Connecting an HDMI- compa tible device to play back videos/audio Connect an HDMI-compatible device (s uch as a TV) to play back videos/audio at Zone2 or Zone4. If you connect an A V amplifier , you can enjoy multi-channel playback in another room (Zone4). • T o watch [...]

  • Seite 86

    PLAYBACK ➤ Playing back videos/audio in multiple rooms (multi-zone) En 86 ■ Op er ating the unit from another room (remote c onnection) Y ou can o perate the unit and external devices from Zone2, Zone3 or Zone4 using the supplied remote control if you connect an infrared signal r eceiver/emitter to the unit’ s REMOTE IN/OUT 1 or REMOTE IN/OUT[...]

  • Seite 87

    PLAYBACK ➤ Playing back videos/audio in multiple rooms (multi-zone) En 87 C ontrolling Z one2, Zone3 or Zo ne4 1 Press ZONE repeatedly to select a zone. Each time y ou press the key , the zone to be operat ed swi tc he s. 2 Press RECEIVER z . Each time y ou press the key , the selected zone is enab led or disabled. When zone audio output is enab [...]

  • Seite 88

    PLAYBACK ➤ Playing back videos/audio in multiple rooms (multi-zone) En 88 ■ O ther opera t ions f or Zone2, Zone3 or Zone4 The following functions are also available when the zone you want to operate is enabled. Adjusting the volume (for Zone2 and Zone3 only) Press VOLUME or MUTE. Selecting the input source and settings at once (SCEN E) Press S[...]

  • Seite 89

    PLAYBACK ➤ Viewing the current status En 89 Sw itching informa tion on the fron t disp lay 1 Press INFO. Each time y ou press the key , the display ed item changes. About 3 seconds later , the corresponding info rmation for the displa yed item appears . • Av ailable items vary depending on the selected input source . The display ed item can als[...]

  • Seite 90

    PLAYBACK ➤ Configuring playback settings for di fferent playback sources (Option menu) En 90 Y ou can configure separate playback settin gs for different playback sour ces. This menu is available on the front panel (or on the TV screen), allowing you to easily configure settings during playback. 1 Press OPTION. Front display TV screen 2 Use the c[...]

  • Seite 91

    PLAYBACK ➤ Configuring playback settings for di fferent playback sources (Option menu) En 91 ■ T o ne Cont ro l ( T o ne Con tro l ) Adjusts the high-frequency range (T reble) and low-frequency range (Bass) of sounds. Choices T reble (T reble), Bass (Bass) Setting range -6.0 dB to Bypass (Bypass) to +6 .0 dB, 0.5 dB in crements Default Bypass ([...]

  • Seite 92

    PLAYBACK ➤ Configuring playback settings for di fferent playback sources (Option menu) En 92 ■ Dialogue Adjust (Dialog Adjust) Adjusts the volume or perceive height of dialogue sounds. ❑ Dialo gue Level (Dialo g L vl) Adjusts the volume of dialogue sounds. If dialogue sounds cannot be heard clearly , you can turn up its volume b y incr easing[...]

  • Seite 93

    PLAYBACK ➤ Configuring playback settings for di fferent playback sources (Option menu) En 93 ❑ S u b w o o f e r Tr i m ( S W. Tr i m ) Fine-adjusts the subwoofer volume. Setting range -6.0 dB to + 6.0 dB (0.5 dB increments) Default 0.0 dB ■ Enhancer (Enhancer) Enables/disables Compressed Music Enhancer and the high-resolution mode. ❑ Enhan[...]

  • Seite 94

    PLAYBACK ➤ Configuring playback settings for di fferent playback sources (Option menu) En 94 ■ Audio Mode (Audio Mode) (U.S.A. model only) Switches between stereo and monaural for FM/AM radio reception. • This setting is applied separately to each band (FM/AM). Settings • HD Radio programs are not av ailable when the unit is in the monaural[...]

  • Seite 95

    CONFIGURATIONS ➤ Configuring input sources ( Input menu) En 95 C ONFIGUR A TIONS Y ou can chan ge the input source settings using the TV screen. 1 Press ON SCREEN. 2 Use the cursor keys to select “Input” and press ENTER. 3 Use the cursor keys ( e / r ) to select an input sour ce to be configured and press the cursor key ( q ). The input sourc[...]

  • Seite 96

    CONFIGURATIONS ➤ Configuring input sources ( Input menu) En 96 ■ Rename/Icon Selec t Changes the input source name and icon displayed on the front display or TV screen. Input sources A V 1–7, V -AUX, A UDIO 1–4, PH ONO, USB, MU L TI C H ■ Setup procedure 1 Use the cursor keys ( e / r ) to select a template and pres s the cursor key ( w ).[...]

  • Seite 97

    CONFIGURATIONS ➤ Configuring the SCENE function (Scene menu) En 97 ■ DMC Control Selects whether to allow DLNA-compatible Digital Media Controller (DMC) to control playbac k. Input source SERVER Settings • A Digital Media Controller (DMC) is a device that can control other network devices through the network. When this function is enabled, yo[...]

  • Seite 98

    CONFIGURATIONS ➤ Configuring the SCENE function (Scene menu) En 98 5 Use the cursor keys and ENTER to ch ange the setting. 6 T o exit from t he menu, press ON SCREEN. Scene menu items ■ Sav e Registers the unit’ s current settings (such as input source and sound program) in the selected scene. • If you hav e changed the input assignme nt f [...]

  • Seite 99

    CONFIGURATIONS ➤ Configuring the SCENE function (Scene menu) En 99 ❑ Detail Selects items to be included as the scene as signments. Y ou can also view the settings currently assigned to the selected scene. T o include it ems as the scene assignments, use the cursor keys to select an item and press ENTER to check the box (or uncheck the box to e[...]

  • Seite 100

    CONFIGURATIONS ➤ Configuring sound programs/surround decoders (Sound Program menu) En 100 Y ou can chan ge the settings of the sound programs and surr ound decoders using the TV screen. 1 Press ON SCREEN. 2 Use the cursor keys to select “S ound Program” and pres s ENTER. 3 Use the cursor keys ( e / r ) to select a sound program to be configur[...]

  • Seite 101

    CONFIGURATIONS ➤ Configuring sound programs/surround decoders (Sound Program menu) En 101 Sou nd P rogr am m enu i tem s • Av ailable items and the default settings vary depending on the selected sound program or surround decoder . ■ Settings for sound programs Item Function Settings Decode T ype Selects a surr ound decoder to be used in comb[...]

  • Seite 102

    CONFIGURATIONS ➤ Configuring sound programs/surround decoders (Sound Program menu) En 102 The following items are available when y ou select “2ch Stereo” or “11ch Stereo”. • Av ailable items in “11ch Stereo” vary depending on the speaker system being used. ■ Settings for dec oders The following items are available when you set “[...]

  • Seite 103

    CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 103 Y ou can configure the unit’ s various function with the menu displayed on the TV screen. 1 Press ON SCREEN. 2 Use the cursor keys to select “Setup” and press ENTER. 3 Use the cursor keys ( e / r ) to se lect a menu. 4 Use the cursor keys ( q / w ) to select an item and pre[...]

  • Seite 104

    CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 104 Setu p me nu item s Menu Item Function Pag e Speaker Auto Setup Automatically optimizes the speaker settings (YP AO). 4 1 Manual Setup Setting Pa ttern Registers two speake r setting patterns and switches between them. 106 Setting Data Copy Copies the “Setting Pattern” parame[...]

  • Seite 105

    CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 105 HDMI HDMI Control Enables/disables HDMI Control . Y ou can also configur e the relevant settings (such as ARC and TV audi o input). 113 Audio Output Selects a device to output audio . 114 Standby Thr ough Select whether to output videos/audio (input thr ough HDMI jacks) to the TV[...]

  • Seite 106

    CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 106 Speaker (Manual Setup) Configures the speaker settings manually . ■ Setting Patt ern Registers two speaker setting patter ns and switches between them. When you configure the following speaker settings, the settings will be memorized in the selected patter n. • Measurement re[...]

  • Seite 107

    CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 107 ❑ Surround Selects whether or not surround speakers are connected and their sizes. Settings ❑ Surround Back Selects whether or not surround back speakers are connected and their sizes. Settings • This setting is not availab le when “Surround” is set to “None”. ❑ F[...]

  • Seite 108

    CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 108 ❑ SWFR Layout Selects a subwoofer layout when 2 subwo ofers ar e used. Settings • This setting is not availab le when “Subwoofer 1” or “Subwoofer 2” is set to “None”. ❑ Extra Bass Sets the speakers to produce the front channel low-frequency components. Settings [...]

  • Seite 109

    CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 109 • T o restore the def ault settings for all speakers, select “PEQ Data Clear” and then “OK”. • T o cop y the parametric equalizer values acquired with “Auto Setup” (p .4 1) to the “Manual” fields f or fine adjustment, select “PEQ Data Copy” and then an equ[...]

  • Seite 110

    CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 110 ❑ Adj ustm ent Adjusts the delay between video and audio output manually when “Auto/Manual Select” is set to “Manual”. Y ou can fine- adjust the audio output timing when “Auto/Manual Select” is set to “Auto”. Setting range 0 ms to 500 ms (1 ms increments) Defaul[...]

  • Seite 111

    CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 111 ■ VPS Selects whether to create Virtual Presence Speaker (VPS) using the front, center , a nd surround speakers. When VPS is enabled, the unit creates fr ont VPS when no front presence speakers are connected, and cr eates rear VPS when front pr e sence speakers are connected bu[...]

  • Seite 112

    CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 112 ❑ Resolution Selects a resolution to output HDMI vid eo signals when “Video Mode” is set to “Processing”. Settings • If you need to select a resolution that is not suppor ted by y our TV , set “MONIT OR CHECK” (p.126) in the “AD V ANCED SETUP” menu to “SKIP?[...]

  • Seite 113

    CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 113 Contrast Adjusts the video contrast. Setting range -100 to +100 Default 0 Saturation Adjusts the video saturation. Setting range -100 to +100 Default 0 HDMI Configures the HDMI settings. ■ HDMI C ontrol Enables/disables HDMI Control (p.150). Settings • T o use HDMI control, y[...]

  • Seite 114

    CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 114 ❑ ARC Enables/disables ARC (p.26) when “HDMI Control” is set to “On”. Settings • Y ou do not need to change this se tting normally . In case noises are produced from the speakers connected to the unit because TV audio signals input to the unit via ARC are not su pport[...]

  • Seite 115

    CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 115 Network Configures the network settings. ■ IP Address Configures the network parameters (such as IP address). ❑ DHCP Select whether to use a DHCP server . Settings ■ Manual network settings 1 Set “DHCP” to “ Off”. 2 Use the cursor keys ( q / w ) to select a para met[...]

  • Seite 116

    CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 116 ■ Network Name Edits the network name (the unit’ s name on the network) displayed on other network devices. ■ Procedure 1 Press ENTER to enter the n ame edit screen. 2 Use the cursor keys and ENTER to rena me and select “ENTER” to confirm the entry . • T o clear the e[...]

  • Seite 117

    CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 117 ■ Zone2 Set, Zone3 Set Configures the Zone2 or Zone3 settings. ❑ Vo l u m e Enables/disables volume adjustments for Zone2 or Zone3 output. If you have connected an exter nal amplifier with volume control to the unit, disable the volume adjustment for the corresponding zone. S[...]

  • Seite 118

    CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 118 ■ Zone4 Set Configures the Zone4 settings. ❑ Zone Scene Rename Changes the scene names (for Zone4) displayed on the front display or TV screen. Y ou can chan ge the scene names in the same manner as “Zone Scene Rename” in “Zone2 Set, Zone3 Set” (p.117). ❑ Zone Renam[...]

  • Seite 119

    CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 119 Fu nc t io n Configures the functions that make the unit easier to use. ■ Input Assignment Assigns the COMPONENT VIDEO, COAXIAL and OPTICAL jacks to another input source. ■ Procedure Example: assigning the OPTICAL ( e ) jack to the input sour ce “A V 2” 1 Use the cursor k[...]

  • Seite 120

    CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 120 ■ T rigger Output1, T rigger Output2 Sets the TRIGGER OUT 1–2 jacks to function in sync with the power status of each zone or input switching. ❑ Tr i g g e r M o d e Specifies the condition for the TRIGGER OUT jack to func tion. Settings Source Specifies the output level of[...]

  • Seite 121

    CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 121 ■ Memor y Guard Prevents accidental changes to the settings. Settings • When “Memory Guard” is se t to “On”, the loc k icon ( o ) is display ed on the menu screen. EC O Configures the auto-standby setting. ■ A uto P ow er Standby Sets the amount of time for the auto[...]

  • Seite 122

    CONFIGURATIONS ➤ Viewing information about the unit (Information menu) En 122 Language Select an on-screen menu language. Settings • The information on the front display is provided in English only . Y ou can view information about the unit using the TV screen. 1 Press ON SCREEN. 2 Use the cursor keys to select “Information” and press ENTER[...]

  • Seite 123

    CONFIGURATIONS ➤ Viewing information about the unit (Information menu) En 123 T y pes of inf o rma tion ■ Audio Signal Displays information about the current audio signal. • Even when the unit is set to output bitstream signals directly , the signal may be con ver ted depending on the specifications and settings of the playback de vice. ■ V[...]

  • Seite 124

    CONFIGURATIONS ➤ Configuring the system sett ings (ADVANCED SETUP menu) En 124 Configure the system settings of the unit while viewing the front display . 1 Set the unit to standby mode. 2 While holding down STRAIGHT on the fr ont panel, press MAIN ZONE z . 3 Press PROGRAM to select an item. 4 Press STRAIGHT to select a setting. 5 Press MAIN ZONE[...]

  • Seite 125

    CONFIGURATIONS ➤ Configuring the system sett ings (ADVANCED SETUP menu) En 125 Selecting the remote c ontrol ID (REMO TE C ON AMP) Change the unit’ s remote control ID so that it matches the remote control’ s ID (default: ID1). When using multiple Y amaha A V receivers, you can set each remote control with a unique remote control ID for its c[...]

  • Seite 126

    CONFIGURATIONS ➤ Configuring the system sett ings (ADVANCED SETUP menu) En 126 Removing the limita tion on HDMI video output (MONIT OR CHECK) The unit automatically detects resolutions suppor ted by a TV connected to the HDMI OUT jack. Disable the monitor check function if you want to specify a resolution in “Resolution” (p.112) when the unit[...]

  • Seite 127

    CONFIGURATIONS ➤ Configuring the system sett ings (ADVANCED SETUP menu) En 127 Updating the firm war e (FIRM UPD A TE) New firmware that provides additional f eatures or product improvements will be released as needed. Updates can be downloaded fr om the Y amaha website. If the unit is connected to the Intern et, you can download the firmware via[...]

  • Seite 128

    CONFIGURATIONS ➤ Controlling external devices with the remote control En 128 Y ou can u se the unit’ s remote control to operate externa l devices (such as BD/DVD players) if you have registered the remote contr ol code of the exter nal device. Y ou can also use the macro function to sequentially operate multiple functions at once. 1 Press SETU[...]

  • Seite 129

    CONFIGURATIONS ➤ Controlling external devices with the remote control En 129 5 Use the numeric keys or cur sor keys to enter the 4-digit remote contr ol code and press ENTER. Once the remote contro l code is successfully registered, “OK” appears in the display wi ndow . If “ERROR” ap pears, registration has f ailed. Repeat from Step 3. 6 [...]

  • Seite 130

    CONFIGURATIONS ➤ Controlling external devices with the remote control En 130 6 T o set another re mote contr ol code, repeat Steps 4 and 5. 7 T o exit from the setup men u, press SETUP. • For details on how to register a remote control code to a SCENE ke y , refer to “Configuring scene assignments” (p.54). ❑ Play back devi ce ope ratio ns[...]

  • Seite 131

    CONFIGURATIONS ➤ Controlling external devices with the remote control En 131 4 Press ENTER. 5 Aim the infrared transmitters of the remote contr ols at each other . 6 Pe rform the f ollowing steps ( a and b ) within 10 seconds. a On the unit , press one of the following ke ys to which you want to assign a funct ion. For playback device: SOURCE z ,[...]

  • Seite 132

    CONFIGURATIONS ➤ Controlling external devices with the remote control En 132 • T o edit scene names of each zone , press one of the SCENE keys and press ZONE to select a zone. 4 Press ENTER. 5 Use the cursor keys to rename. T o locate the position, use the cursor k eys ( e / r ). T o select a character (A to Z, a to z, 0 to 9, space, symbols), [...]

  • Seite 133

    CONFIGURATIONS ➤ Controlling external devices with the remote control En 133 By default, the following macro operations are available after pressing a macro operation key when the macro operations ar e enabled. ■ Programming macro oper ations Y ou can program up to 10 remote control commands for each macro operation key . If you press the corre[...]

  • Seite 134

    CONFIGURATIONS ➤ Controlling external devices with the remote control En 134 Resetting the remote c ontrol configurations ■ Clearing the remote contr ol configura tions Y ou can c lear r emote control configurat ions by selecting a type of settings or clear all the remote control configurations. 1 Press SETUP. P erfo rm each of the f ollowing s[...]

  • Seite 135

    CONFIGURATIONS ➤ Controlling external devices with the remote control En 135 ■ Erasing a func tion assigned t o each ke y by learning Y ou can erase a function assig ned to each key by learning and restore the default key assignments. 1 Press SETUP. P erfo rm each of the f ollowing steps wit hin 30 seco nds. Otherwise , the settin g will be can[...]

  • Seite 136

    CONFIGURATIONS ➤ Updating the unit’s firmware via the network En 136 New firmware that provides a dditional features or product improvements will be released as needed. If the unit is connected to the Internet, you can download the firmware via the network and update it. • Y ou can also update the fir mw are using the USB memor y de vice from[...]

  • Seite 137

    APPENDIX ➤ Frequentl y asked questions En 137 APPENDIX The new spea ker sy stem does not provide an ideal sound balance ... If you have changed sp eakers or have a new speaker system, use “Auto Setup” to optimize the speaker settings again (p.41). If you want to adjust the speaker settings manually , u se “Manual Setup” in the “Setup”[...]

  • Seite 138

    APPENDIX ➤ Troubleshooting En 138 Refer to the table below when the unit doe s not function properly . If the problem you are experiencing is not listed below or if t he instructions below do not help, tur n off the unit and power a mplifier , disconnect the power cable, and contact the nearest authorized Y amaha dealer o r service center . First[...]

  • Seite 139

    APPENDIX ➤ Troubleshooting En 139 Aud io External devices cannot be controlled using the remote control. The remote cont rol is set to cont rol the unit. Press SOURCE/RECEIVER to set th e remote contr ol to control external devices (the key lights up in gree n). The correspondin g remote control code is not set properly . Set the remote con trol [...]

  • Seite 140

    APPENDIX ➤ Troubleshooting En 140 No sound is coming from the subwoofer . The playback sourc e doe s not con tain LFE or l ow-frequen cy signals. T o check it, set “Extra Bass” in the “Setup” men u to “On”, in or der to output the front c hannel low-fr equency componen ts from the subwoofer (p.108) . Subwoofer output is disabled. Perf[...]

  • Seite 141

    APPENDIX ➤ Troubleshooting En 141 Vi de o Proble m Cause Remedy No video. Another input sour ce is selected on the unit. Select an appropriate inpu t source with the input selection keys. Another input sour ce is selected on the TV . Switch t he TV input to display the video fr om the unit. The video signal output from the unit is no t supported [...]

  • Seite 142

    APPENDIX ➤ Troubleshooting En 142 FM/AM r adio Proble m Cause Remedy FM radio reception is weak or noisy . There is multi-path int erference. Adjust the FM antenna height or orientation , or place it in a differ ent location. Y our ar ea is too far from t he FM station transmitte r . (U.S.A. model only) Set “Audio Mode” in the “Option” me[...]

  • Seite 143

    APPENDIX ➤ Troubleshooting En 143 USB and netw ork Proble m Cause Remedy The unit does not detect the USB device. The USB device is not connected to the USB jack secur ely . T urn of f t he unit, recon nect your USB device, and turn the unit on aga in. The file system of the USB device is not F A T16 or FA T32. Use a USB device with FA T16 or F A[...]

  • Seite 144

    APPENDIX ➤ Error indications on the front display En 144 Error indications on the front displa y Message Cause Remedy Access denied Access to the PC is denied. Configure the sharing se ttings and select t he unit as a device to which music contents ar e shared (p.75). Access err or The unit cannot access the USB device. T urn off the unit an d re[...]

  • Seite 145

    APPENDIX ➤ Glossary En 145 Aud io i nfor mati on ■ Audio decoding format Dolb y Digital Dolby Digital is a compressed digital audio format developed by Dolby Laboratories , Inc. that supports 5.1-channel audio. This technology is used for audio on most DVD disc s. Dolby Digital EX Dolby Digital EX creates total 6.1-channel audio from 5.1-channe[...]

  • Seite 146

    APPENDIX ➤ Glossary En 146 Sampling frequency/Quantization bit Sampling frequency and quantization bits indicate the quantity of inform ation when an analog audio signal is digitized. These values are noted as in the following example: “48 kHz/24-bit”. • Sampling frequency Sampling frequency (the number of times the signal is sampled per se[...]

  • Seite 147

    APPENDIX ➤ Glossary En 147 Ya m a h a t e c h n o l o g i e s CINEMA DSP (Digital Sound Field Processor) Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is best experienced in a theater that has many speakers designed for acoustic effects. Since home conditions (such as room size, wall mat[...]

  • Seite 148

    APPENDIX ➤ Glossary En 148 Vi de o s i gn a l f l ow Video signals input from a video device to the unit are output to a TV as shown below . m (solid line) is always available. , (dotted line) is available only when “Analog to Analog Conversion” (p.111) in the “Setup” menu is set to “On” (default). ■ Video c onv ersion table • Y o[...]

  • Seite 149

    APPENDIX ➤ Glossary En 149 Multi-zone output ■ Audio output m : A vailab le *1 Av ailable when “HDMI OUT2 Assign” (p.118) in the “Setup” menu is set to “Zone2” (Audio Output: On) *2 Av ailable when “HDMI OUT2 Assign” (p.118) in the “Setup” menu is set to “Zone4” *3 Av ailable when 2-channel PCM signals are input (stereo [...]

  • Seite 150

    APPENDIX ➤ Information on HDMI En 150 HDMI C ontrol HDMI Control allows you to operate exter nal devices via HDMI. If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit (such as power and volume) with TV remote control operations. Y ou can also control playback devices (such as HDMI Control-compat[...]

  • Seite 151

    APPENDIX ➤ Information on HDMI En 151 7 Check that the unit is pr operly sy nchr onized with the TV b y turning off the TV or adjusting the TV v o lume with the TV remo te contr o l. • If HDMI Control does not work properly , tr y unplugging the TV in Step 3 and plugging in the TV again in Step 4. It may solv e the prob lem. Also , HDMI Control[...]

  • Seite 152

    APPENDIX ➤ Reference diagram (rear panel) En 152 • The area around the video/audio output jacks is marked in white on the actual product to prevent improper connections. Refer ence diagr am (rear panel) (U.S.A. model)[...]

  • Seite 153

    APPENDIX ➤ Trademarks En 153 Manufactured under license from Dolby Laboratories. Dolby , Pro Logic, Surround EX and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide pa ten[...]

  • Seite 154

    APPENDIX ➤ Specifications En 154 Input jacks • Analog Audio Audio (Unbalance) x 9 (A V 1–4, AUDIO 1–3, PHONO, V -AUX) Audio (Balance) x 1 (AUDIO 4) ( 1:GHD, 2:HOT , 3:COLD) MUL TI CH INPUT x 1 (8 ch) (FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R, SUBWOOFER) • Digital Audio (Suppor ted fr equencies: 32 kHz to 96 kHz) Optical x 4 (A V[...]

  • Seite 155

    APPENDIX ➤ Specifications En 155 USB • Capable of iPod, Mass Storage Class USB Memory • Current Supply Capacity: 2.1 A Network • PC Client Function • Compatible with DLNA ver . 1.5 • AirPlay suppor ted • Internet Radio Compatible Decoding Formats • Decoding Format - Dolby T rueHD, Dolby Digital Plus - Dolby Digital, Dolby Digital EX[...]

  • Seite 156

    APPENDIX ➤ Specifications En 156 • Maximum Gain (Volu me: Maximum) Main Zone Pr eout .......................... ............. ............... ...... 14 dB Zone2/Zone3 Preou t ...................... ............... .............. ..... 14 dB • Volume Cont rol Main Zone ..... ............M UTE, -80 dB to +16. 5 dB (0.5 dB Step ) Zone2/Zone3 ...[...]

  • Seite 157

    APPENDIX ➤ Index En 157 Symbols Exclamation mark (!) 136 Lock icon ( o ) 12 1 Numerics 11.2-channel system 19 11ch Stereo (sound program) 58 16:9 Normal (Aspect, Setup menu) 112 2.1-channel system 21 2ch Stereo (sound program) 58 3.1-channel system 21 5.1-channel system 20 , 21 7.1-channel system 20 9.2-channel system 19 , 20 A Access denied (err[...]

  • Seite 158

    APPENDIX ➤ Index En 158 Default setting restoration 126 Delay Enable (Lipsync, Setup menu) 109 Detail (Load, Scene menu) 99 Detail Enhancement (Video Mode, Setup menu) 112 Device Control (Load, Scene menu) 98 DHCP (IP Address, Setup menu) 115 Dialog Adjust (Option menu) 92 Dialog Lift (Dialog Adjust, Op tion menu) 92 Dialog Lvl (Dialog Adjust, Op[...]

  • Seite 159

    APPENDIX ➤ Index En 159 Hi-Res Mode (Enhancer, Option menu) 93 Hold/Unhold (HD Radio™, Optio n menu) 64 I In.Trim (Volume Trim, Option menu) 92 Indicator (part names and functions) 12 INFO key 11 , 16 Information display (front display) 12 Information menu 122 Information switching (front display) 89 Initial Delay (Sound Progra m menu) 101 Init[...]

  • Seite 160

    APPENDIX ➤ Index En 160 NTSC (TV FORMAT, ADVANCED SETUP menu) 125 Numeric key (remote control) 16 O ON SCREEN key 15 OPTICAL jack 22 OPTION key 15 Option menu 90 Out of Phase (YPAO warning message) 51 Output (Audio Signal, Information menu) 123 Over Distance (YPAO warning message) 51 P PAL (TV FORMAT, ADVANCED SETUP menu) 125 Panorama (Sound Prog[...]

  • Seite 161

    APPENDIX ➤ Index En 161 Sound program 57 , 58 Sound Program menu 100 Speaker (Setup menu) 106 Speaker placement 18 Spectacle (sound program) 57 Sports (sound program) 57 Standard (sound program) 57 Standby indicator (front p anel) 10 Standby Sync (HDMI Control, Setup menu) 114 Standby Through (HDMI, Setup menu) 114 Station Info (HD Radio™) 63 S[...]

  • Seite 162

    APPENDIX ➤ Index En 162 Y Yamaha Parametric room Acoustic Optimizer (YPAO) 41 YPAO (Yamaha Parametric r oom Acoustic Optimizer) 41 YPAO error message 50 YPAO MIC jack 11 YPAO microphone 41 YPAO warning me ssage 51 Z Zone Rename (Main Zone Set, Setup menu) 116 Zone Rename (Zone2 Set, Setup menu) 117 Zone Rename (Zone3 Set, Setup menu) 117 Zone Ren[...]