XM Satellite Radio XMC10 Bedienungsanleitung

[...]

2 T able of Contents Congratulations .......................................................................... 3 FCC Information ........................................................................ 4 Cautions and W arnings ............................................................. 5 Contents XMC10 ...........................................[...]

3 Congratulations Thank you for purchasing the Audiovox Xpress XM ® Satellite Car Kit. Y ou are one step closer to experiencing the latest innovation in XM ® Satellite Radio. XM ® Satellite Radio will revolutionize your vehicle or in-home entertainment. XM ® features over 170 digital channels — the most commercial-free music, over 30 channels[...]

4 FCC Information · NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy[...]

5 Cautions and Warnings 1. Do not install the XMC10 car cradle in a position that hinders your view through the windshield, or obstructs viewing of the dashboard indicators and displays. 2 . Do not install the unit where it may obstruct the operation or deployment of safety devices, such as airbags, etc. 3. Do not allow operation of the unit to det[...]

6 Swivel Bracket 1 pc. Contents XMC10 12 Volt-to-5 Volt DC Power Adapter 1 pc. Install Manual Antenna 1 pc. Cradle XMC10 1 pc.[...]

7 ACCESSORY KIT Alcohol Cleaning Pad, Surface Cleaning Pad, Instruction Sheet, Antenna Cable Exit Plug CLA Female Socket 1 pc. OPTIONAL Audio Cable (P/N SAT-RCA) FM Direct Adapter (P/N XMFM-1) Contents XMC10 (Cont) Cassette Adapter 1pc.[...]

8 Installation/Wiring Precautions 1. To prevent a short-circuit, be sure to turn off the ignition and remove the negative (-) battery cable prior to installation. Connect power wires last. 2. Do not install the unit in the locations exposed to direct sunlight or, in areas subject to extreme temperatures. 3. Incorrect installation may cause damage t[...]

9 Setting Up and Installing Y our Kit NOTE: The XM signal can be received and processed virtually anywhere as long as there are no obvious satellite signal obstructions such as nearby buildings, high terrain, parking garages or tunnels. 1. Cabling Interconnections Y ou can begin to enjoy XM ® Satellite Radio as soon as the Xpress XM ® Receiver an[...]

10 Interconnect Diagram AUX AUDIO INPUT TO AUDIO OUTPUT OF EXTERNAL PLA YBACK DEVICE. THIS PERMITS AUDIO FROM AN EXTERNAL DEVICE SUCH AS A PORT ABLE CD PLA YER OR MP3 PLA YER TO BE PLA YED THROUGH THE XPRESS XM WIRELESS FM TRANSMITTER. NOTE: 1. IF THE XMC10 IS INST ALLED USING THE OPTIONAL XMFM-1 FM DIRECT ADAPTER, DO NOT CONNECT AN AUDIO CABLE TO [...]

11 XMC10 CRADLE (REAR VIEW) XM ANTENNA OPTIONAL SA T-RCA AUDIO CABLE (PURCHASED SEP ARA TEL Y) (CONNECT TO AUXILIARY AUDIO INPUTS ON VEHICLE HEAD UNIT .) OPTIONAL FM DIRECT ADAPTER XMFM-1 (PURCHASED SEP ARA TEL Y) TO VEHICLE RADIO ANTENNA JACK XMC10 CRADLE (RIGHT SIDE VIEW) Interconnect Diagram (Cont)[...]

12 CAUTION: Do not install the swivel bracket on a leather or fabric surface, or in a position that could impair your vision, block air bag(s) or obstruct vehicle dashboard controls and/or radio CD/cassette operational displays. NOTE: The adhesive backing on the bracket will not permit easy repositioning once it has been mated to the surface; use e[...]

13 NOTE: Allow a 72-hour period for the adhesive backing to cure completely . e. Remove the plastic liner from the adhesive backing on the bracket, and fix the base in position on the surface; make sure the mounting pad is accurately positioned on the first try , since repositioning may be difficult, if not impossible. f . If the bracket is to be s[...]

14 SCREW HOLES (2) FOR DIRECT HARD MOUNTING PLASTIC LINER AND ADHESIVE BACKING SWIVEL ADJUSTMENT SCREW SWIVEL BRACKET SIDE (HORIZONT AL) MOUNTING CONFIGURA TION VERTICAL MOUNTING CONFIGURA TION XMC10 CRADLE ASSEMBL Y[...]

15 3. Using Other Manufacturer ’s Mounts The XMC10 Cradle can also be installed using other manufacturer’s mounts; the mounting plate provisions on the rear and bottom of the cradle provide you with two mounting options within the vehicle using various vehicle-specific aftermarket brackets. 4. Installing the Xpress XM ® Receiver into the Cradl[...]

16 CRADLE FRONT VIEW CONNECTOR GUIDE PIN XMC10 SYSTEM CONNECTOR Xpress XM ® RECEIVER SYSTEM CONNECTOR Xpress XM ® RECEIVER REAR VIEW RAISED DETENT RECEIVER NOTCH[...]

17 5. Connection Options The Xpress Receiver and Cradle provide an audio output signal in three ways: a. FM Wireless T ransmitter - When using the XMC10 cradle with the wireless FM transmitter option, the XM audio signal can be received through your vehicle radio on selectable FM frequencies using the menu options included in your Xpress Receiver .[...]

18 d. Xpress Cassette Adapter - The XM 7 Xpress Cassette Adapter offers an additional audio connection option by utilizing your existing vehicles in-dash cassette deck. XM 7 research and lab test results show that using a vehicle cas- sette adapter can best maximize the relationship between the best sound quality and ease of installation (see chart[...]

19 Xpress Cassette Adapter Installation . Installation is simple. 1.) Plug the end jack (1) into the XM7 Xpress Car Cradle’s audio output (2). 2.) Insert the cassette adapter (3) in the vehicles in-dash cassette slot (4). 1 2 3 4[...]

20 6. Installation Guidelines IMPOR T ANT : For best wireless FM Modulator performance, you must locate the satellite radio antenna in a location that is in close proximity to the vehicle’s FM antenna. For example, with reference to the adjacent illustration, if your FM antenna is located on a rear fender or top of the roof, mount the XM antenna [...]

21 b. When routing the antenna cable along the windshield or rear window , tuck the antenna cable under the window seal to maintain a professional looking installation and to avoid loose wires on the exterior of the vehicle which are susceptible to damage. Follow the interior cable routing diagram depicted by dashed lines in the illustration above [...]

22 f . For option 2 and front mounting locations, route the cable along the door jam and into the vehicle as shown. Route the cable across the weather seal near the bottom of the door to reduce water leaks. Step 2. Be sure to locate your car cradle and receiver below the top of the dash in your vehicle to keep the product within easy reach while dr[...]

23 Step 3. Once you have plugged the power and antenna jacks into the car cradle, use the included cable organizer as shown in the illustration at right to improve the overall appearance of the installation. Step 4. Re-use the cable twist ties that were provided with the power adapter and car antenna cables and always be sure to gather , bundle, tw[...]

24 For example, secure the excess cable up under your dash board, between the seat and the console, or on the floor under a seat or floor mat. This will help to prevent the excess cable from interfer ing with the everyday use of your vehicle, improve the appearance of the installation, and avoid any undesirable accidental damage to the cables that [...]

25 NOTES[...]

26 AUDIOVOX ELECTRONICS CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with new or recondi[...]

27 THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPL[...]

© 2006 Audiovox Electronics Corporation 128-7472D[...]