Uniden BC780XLT Bedienungsanleitung

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100

Zur Seite of

Richtige Gebrauchsanleitung

Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung Uniden BC780XLT an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von Uniden BC780XLT, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.

Was ist eine Gebrauchsanleitung?

Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung Uniden BC780XLT die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.

Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung Uniden BC780XLT. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.

Was sollte also eine ideale Gebrauchsanleitung beinhalten?

Die Gebrauchsanleitung Uniden BC780XLT sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts Uniden BC780XLT
- Den Namen des Produzenten und das Produktionsjahr des Geräts Uniden BC780XLT
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts Uniden BC780XLT
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen

Warum lesen wir keine Gebrauchsanleitungen?

Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von Uniden BC780XLT zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von Uniden BC780XLT und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service Uniden finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von Uniden BC780XLT zu überspringen, wie es bei der Papierform passiert.

Warum sollte man Gebrauchsanleitungen lesen?

In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts Uniden BC780XLT, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.

Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von Uniden BC780XLT widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.

Inhaltsverzeichnis der Gebrauchsanleitungen

  • Seite 1

    500-Channel Trunk Tr acking Scanner Visit our W ebsite at www .bc780xlt.com BC780XL T TR UNK TRA CKER III bc780xlt foldouts.qxd 10/08/2000 4:50 PM Page 1[...]

  • Seite 2

    Band F requency Range Mode Step No . (MHz) (kHz) 22 470.0000–472.9875 NFM 12.5 473.0000–475.9875 NFM 12.5 476.0000–478.9875 NFM 12.5 479.0000–481.9875 NFM 12.5 482.0000–484.9875 NFM 12.5 485.0000–487.9875 NFM 12.5 488.0000–490.9875 NFM 12.5 491.0000–493.9875 NFM 12.5 494.0000–496.9875 NFM 12.5 497.0000–499.9875 NFM 12.5 500.0000[...]

  • Seite 3

    Fr ont View and Displa y 1. VFO/SELECT Control 2. V OLUME/SQUELCH Control 3. Scan K ey ( SCAN ) 4. Manual K ey ( MAN ) 5. Displa y 6. Search K ey ( SRCH ) 7. Hold/Up K ey ( HOLD/ s ) 8. Numeric Ke ypad (each banks channel numbers) 9. Menu K ey ( MENU ) 10. T runk K ey ( TRUNK ) 11. Limit/Down K ey ( LIMIT/ t ) 12. Select/Mute K ey ( SELECT/MUTE ) 1[...]

  • Seite 4

    Rear View 33. Antenna Connector 34. T ape Recorder Output J ack Uniden ® and Bearcat ® are registered trademarks of Uniden America Cor poration. T runkT rac k and Smar tScanner are propr ietar y trademarks of Uniden America Cor poration. 35. External Speaker Jac k 36. DC P ower Jac k 37. Remote Control T er minal 33 34 35 36 37 bc780xlt foldouts.[...]

  • Seite 5

    This shortcut card is designed to assist y ou in getting through the menu screens using the direct entry mode for commonl y used features. Please read the manual thor oughly bef ore using this card. Be sure to back out of the menu screen after each shortcut by repeatedl y pressing MENU . bc780xlt foldouts.qxd 10/11/2000 10:37 AM Page 11[...]

  • Seite 6

    If you need an y assistance with this product, please call our Customer Ser vice Hotline at 1-800-297-1023 . A Uniden representative will be happ y to help you with an y matters regarding the operation of this unit, a vailab le accessories, or any other related matters. Hours: M-F 7:00 a.m. to 7:00 p .m., Central time. Also please check out our w e[...]

  • Seite 7

    i Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i nside front cov er Impor tant Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 T erminology . . . . . . . . . . . . . . . [...]

  • Seite 8

    ii Service Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Service Search Skip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Weather Channel Search . . . . . . . . . . . . . . . . . .[...]

  • Seite 9

    1 Impor tant Notice • This scanning radio has been manuf actured so that it will not tune radio frequencies assigned by the FCC f or cellular telephone usage. The Electronic Communications Privacy Act of 1986, as amended, makes it a f ederal cr ime to intentionally intercept cellular or cordless telephone transmissions or to market this radio whe[...]

  • Seite 10

    2 T erminology What is Scanning? Unlike standard AM or FM r adio stations, most two-w ay comm unications do not transmit continuously . The BC780XL T scans the channels you program until it finds an activ e frequency . Scanning stops on an active frequency and remains on that channel as long as the transmission continues . When the transmission end[...]

  • Seite 11

    3 T runkT rac k™ changes this! Not only does your ne w BC780XL T scan channels like a conv entional scanner , it actually follows the users of a trunk ed radio system. Once you know a talkgroups ID , you w on’t miss any of the action. If you're a ne w scanner enthusiast, you ma y want to read the first par t of this manual and use your sca[...]

  • Seite 12

    4 Feature Highlights • T runk T racking – Follo ws VHF High Band, UHF , 800/900MHz tr unked pub lic safety and public service systems just as if conv entional two-wa y communications were used. • Multi-T rack – T rack more than one trunking system at a time. Scan conv entional and trunked systems at the same time. • 500 Channels – Progr[...]

  • Seite 13

    5 Where to Obtain More Inf ormation Bef ore using your scanner , you must progr am frequencies into av ailable channels . The Betty Bearcat F requency Guide lists typical frequencies used around the U .S.A. and Canada that you ma y program into your ne w scanner . T o obtain another cop y of the frequency guide, contact one of the f ollowing: • U[...]

  • Seite 14

    6 Inc luded with Y our Scanner If any of these items are missing or damaged, immediately contact y our place of purchase or Uniden Customer Ser vice at: (800) 297-1023, 7:00 a.m. to 7:00 p .m., Central Time, Monda y through F riday . • A C Adapter • Cigarette Lighter Adapter Cord • Operating Guide • Mounting Brac ket • T elescopic Antenna[...]

  • Seite 15

    7 Setup Connecting an Antenna Y ou must install an antenna bef ore you can operate the scanner . Y ou hav e been provided a standard telescopic antenna that works well with this scanner , but you ma y want to purchases another type to increase the range. T o connect the telescopic antenna, simply connect it to the BNC type ANT . connector on the re[...]

  • Seite 16

    8 T ypical Mounting Methods The BC780XL T can be conv eniently mounted on a table , bulkhead, o verhead, or an y other desired location (ref er to figure below f or typical mounting methods). Caution : Make sure there are no hidden electrical wires or other items behind the desired location bef ore proceeding. Check that free access for mounting an[...]

  • Seite 17

    9 Applying P ower f or V ehicle Installation Y ou can power y our scanner using either the supplied DC power cord or y our vehicle’ s cigarette lighter sock et using DC cigarette lighter power cord. Caution : Y ou must use a power source that supplies 13.8 V DC and delivers at least 700 mA. Y our standard 12V car battery should be sufficient. The[...]

  • Seite 18

    10 Desktop Installation Y ou can place this scanner on a desk, shelf, or table to use it as a base station. 1. Flip up the feet f or desk installation. 2. Extend the antenna to full ver tical position. Adjust the angle f or best reception. Applying P ower Using Standar d A C Po wer T o pow er the scanner from an AC outlet, use the pro vided A C ada[...]

  • Seite 19

    11 Connecting an Earphone F or private listening, you can connect an earphone with a 1/8 inch (3.5 mm) plug to the EXT . SP . jack on the back of the scanner . Be very careful as damage to your hearing can result if the V OLUME control is not set to the lowest le vel first . See below f or “Listening Saf ely” instructions. (Y our local electron[...]

  • Seite 20

    12 Note : F old out the F ront Cov er to see the Controls and Indicators while reading this Guide. T urn the Scanner On T urn the V OLUME control clockwise out of the detent position. The scanner automatically star ts scanning. Since there are no frequencies programmed in your scanner initially , you ma y not receive an y signals. Once you set the [...]

  • Seite 21

    13 Understanding the Men u System It is very impor tant for y ou to understand the Menu screen. T o navigate through the Menu screen is really quite simple. Many of the f eatures of this scanner , can only be accessed by the menu screens. There are se veral w a ys to get through the screens. First of all, press MENU to get star ted. Any time you wa[...]

  • Seite 22

    14 Menu Description and Numeric K eypad Equiv alents Below are the menu screens and a brief description or pur pose of the feature . 1:SYSTEM DATA 1:DIMMER Allows y ou to change the brightness of the display . 2:SCREEN MASK Screen Mask allows y ou to limit what appears on the display to the alpha tags that you ha ve set f or a channel along with a [...]

  • Seite 23

    15 3. T one Search - In this mode, as soon as the scanner stops on any (non-trunk ed) channel, the scanner will begin to search f or any subaudible tone that is being used on a transmitted frequency . The scanner will check each CTCSS tone sequentially and it will find DCS tones instantly . 10:BANK TAG Allows y ou to set an alphanumeric text tag f [...]

  • Seite 24

    16 6:STEPS Y our BC780XL T is programmed with def ault step sizes f or each frequency range (see inside front cov er). Steps are impor tant if you are interested in using the VFO to tune off-frequency from a frequency programmed into memory or if you wish to program a frequency that the def ault step size will not accept. For e xample, in VHF Hi-ba[...]

  • Seite 25

    17 4:L/O ID REVIEW Use this menu item to re view the IDs that y ou hav e lock ed out during Search and Scan. Use the Up/Down arrow k eys or turn the VFO to the left or right to view the IDs that hav e been lock ed out. T o leav e the lock out IDs unchanged, press MENU to back out of the men u. T o unlock an ID , press the L/O ke y . T o unlock all [...]

  • Seite 26

    18 8:STATUS BIT (MO TOR OLA) On T ype II tr unking systems there is a method by which specializ ed types of communications utilize unique talkg roup numbers. An emergency call will occur on a unique talkgroup from its primar y assignment, for e xample. Because the BC780XL T def aults to Status-Bit On mode, you ne ver need to worry about missing the[...]

  • Seite 27

    19 2:DELAY Set a dela y for the search r anges. This applies to all ranges (See CHANNEL D A T A- STEPS f or details). 3:ATTENUATOR Set attenuation f or all search ranges. (See CHANNEL DA T A-A TTENU A T OR f or details). 4:TONE DATA The def ault mode is off. This means that you will receiv e all transmissions on any frequencies that are active with[...]

  • Seite 28

    20 Bef ore the BC780XL T can begin conv entional scanning, you must prog ram a frequency into at least one channel. Repeat this procedure for each channel y ou want to progr am. Storing Frequencies into Channels 1. Select frequencies from your dealer , from various sources on the internet, or from one of the guides listed on page 5. Here is a list [...]

  • Seite 29

    21 Duplicate Frequency Alert If you enter a frequency which has been stored in another channel, you will hear a beep and the other channel displa ys WARNING . Press to clear and star t again. ––– OR ––– Press E again to store the frequency in both channels. Storing T ext T ags Y ou can customize your scanner b y storing text tags f or e[...]

  • Seite 30

    22 Beep Alert The scanner can aler t you with three rapid beeps at the beginning of a tr ansmission on an assigned frequency . Assigning the beep alert to a channel This aler t can be set on/off to ev ery channel (or to ev er y ID memor y for T runking mode). 1. Press MENU . 2. Press s or t to select C H D ATA and then press E . 3. Select the chann[...]

  • Seite 31

    23 1. After programming frequencies, simply press SCAN to begin scanning. 2. The bank indicators selected for scanning appear in the displa y , and the bank being currently monitored flashes. Y ou can deselect banks from active scanning by pressing their number on y our ke ypad. The indicator for each deselected bank turns off , and the banks chann[...]

  • Seite 32

    24 Still another method of direct access to a specific channel: 1 Press MAN . 2 Press s or t to select the channel. (or press and hold s or t to scroll more quickly .) Lastly to step up through the channels one at a time, repeatedly press MAN. RF Attenuation Feature The BC 780XL T comes with an RF Attenuation f eature. If you're near an un usu[...]

  • Seite 33

    25 5. Press s or t to select one of the delay periods provided and then press E . DLY appears on the displa y unless no delay has been set. 6. For Search mode , select SEARCH EVENT - DELA Y , then set the delay period. Note : The dela y periods are as follows: • None: Dela y feature off • 1 sec.: Dela ys for 1 sec. before re-scanning • 2 sec.[...]

  • Seite 34

    26 3 . The scanner immediately resumes scanning because the lock ed out channel is no longer in the scanning sequence. Lock out Tips • Write down your loc ked-out channels and put in a con venient place in case you need to restore them. Restoring a Locked-out Channel 1. Press MAN . 2. Select a locked out channel. a. Enter the channel number . b .[...]

  • Seite 35

    27 Changing the Priority Channel Y ou cannot eliminate the Prior ity Channel, but y ou can change it to any one of the 50 av ailable channels in each bank. 1. Press MAN . 2. T o select a new Priority Channel: a. Enter the channel number . b . Then press MAN again. 3. Press and hold PRI f or two seconds to designate this channel as your ne w Prior i[...]

  • Seite 36

    28 Setting a Searc h Range Note: First you m ust set the search ranges through the menu screen prior to any searching. The BC780XL T can search up to 10 separate frequency ranges to help y ou discov er new stations in your area. T o set a search range , enter into the menu mode. 1. Press MENU . 2. Press s or t to select SEARCH EVENT and then press [...]

  • Seite 37

    29 Searc h Hold Feature 1. Press HOLD/ s at anytime to stop the search. 2. Press HOLD/ s to mov e to the ne xt higher frequency . ––– OR ––– Press LIMIT/ t to mov e down to the pre vious frequency . 3. Press SRCH to resume searching. Data Skip A scanner will normally stop on any transmission it receives . This means the BC780XL T will o[...]

  • Seite 38

    30 Storing Searc h Frequencies Y ou can quickly store any frequency y ou find during Search. Caution : Y ou must select the channel in which you will store the frequency bef ore enter ing the search mode. Otherwise, y ou may er ase a stored frequency that you w ant to keep . 1. Dur ing search, press HOLD/ s when the scanner stops at the frequency y[...]

  • Seite 39

    31 Squelch (SQ) Mode The scanner can be set to the f ollowing SQ modes. • Carrier SQ mode (default setting) The scanner will stop on any transmission or squelch opening, regardless of whether an y sub-audible tone has been prog rammed f or the channel or search range. • T one SQ mode The scanner will stop on any activ e frequency f or which eit[...]

  • Seite 40

    32 Note : • CTCSS: Continuous T one Coded Squelch System. • DCS: Digital Coded Squelch. • F or example , the scanner shows the f ollowing displa ys. • If the dela y feature (-2 sec/-5 sec/-10 sec) has been set while in T one search mode, it resumes scanning according to the dela y setting. Additional Menu Options f or Searching Each of thes[...]

  • Seite 41

    33 The Ser vice Search feature allo ws you to toggle through the f ollowing ten preprogr ammed ser vices. The frequencies selected for these services are the most commonly used around the U .S. • 1: PUBLIC SAFETY • 6: RAILROAD • 2: NEWS • 7: AIR • 3: T V BROADCAST • 8: CB RADIO • 4: HAM RADIO • 9: FRS • 5: MARINE • 0: SPECIAL (f[...]

  • Seite 42

    34 W eather Channel Searc h T o hear preprogr ammed NOAA weather channels: 1. Press WX . Note : • It’ s possible to receive more than one w eather broadcast in your area. If the broadcast sounds weak or distant, press SRCH to look f or a closer station. • Press HOLD/ s if you w ant to stop searching (WX hold mode). NWR-SAME Alert In addition [...]

  • Seite 43

    35 Programming FIPS Code The 6-digit F ederal Inf or mation Processing System (FIPS) codes established b y the National W eather Ser vice (NWS) must be programmed in y our scanner . These codes specify an emergency and the specific geographic area (such as county) aff ected by the emergency . 1. At the WX hold mode , press and hold WX f or 2 second[...]

  • Seite 44

    36 T runked Systems Y our BC780XL T is designed to track three major types of trunked r adio systems. These systems are described here. v MO T OROLA - Including T ype I, T ype II, Hybrid, SMARTNET , and Pr ivacy Plus . Motorola systems are widely used by pub lic saf ety and business users. Most are on the 800 MHz band, and recent systems are appear[...]

  • Seite 45

    37 Pr ogramming and Receiving T runked Systems Programming T runking Frequencies The first step in trac king a trunked system is storing the frequencies in one of the 10 av ailable banks in y our scanner . Remember that y ou can only store one trunking system in each bank. Important : If you are programming an ED ACS or L TR tr unked system, you m [...]

  • Seite 46

    38 + Important! 7. Press TRUNK f or 2 seconds. A tone sounds, and E , M , or L icon appears on the displa y according to the system selected. Note : • T o clear a mistak e while entering the frequency , press (decimal ke y) repeatedly until the displa y is cleared. • If you enter a frequency which is out of the system’ s tr unking range, a di[...]

  • Seite 47

    39 Setting the Squelch F or trunked reception, a good setting for the SQUELCH control is in the center of the range with the red marker pointing up . See the illustration. If set too high (CCW) in some cases it could pre vent y our scanner from locking to the control channel reliab ly . If set too low (CW) it will slightly dela y finding the contro[...]

  • Seite 48

    40 T alkgroups displa y differently in Motorola, ED ACS and L TR systems. Y ou should read the appropriate par ts of this guide to understand the formats. The bottom line of the displa y indicates the Bank and the type of trunked system you are monitoring. Y ou can change this to display a bank tag b y using the System Menu. Regardless of the syste[...]

  • Seite 49

    41 Restoring Locked-out IDs T o unlock a single ID , follo w these steps: 1. Press MENU . 2. Select TRUNK D A T A - BANK NO . - L/O ID REVIEW using s , t or VFO and pressing E , SELECT or VFO . 3. Select the locked out ID y ou want to unloc k using s or t . 4. Press L/O . The ID is unlocked and the ne xt lock ed ID displa ys. T o unlock all loc ked[...]

  • Seite 50

    42 Scan Lists Each bank of your BC780XL T can be a tr unk tracking bank and it can be a con v entional scanning bank. When you designate a bank as a trunking bank, your scanner sets up 10 Scan Lists, which are simply lists used to store y our fa v orite IDs. Each list can contain up to 10 IDs, so y ou can store a total of 100 IDs for each trunk tra[...]

  • Seite 51

    T o enter an ED ACS ® ID: a. Enter ID you w ant to store. Use the f or the “dash”. b . Press E . Hint : Remember that Uniden's AFS f or mat allows y ou to enter full or par tial EDA CS IDs for powerful fle xibility in all modes. Be sure to read the section "EDA CS Reception" on page 49 to learn how this works. Note : The BC780XL[...]

  • Seite 52

    ID Scan Mode 1. Press SCAN to begin scanning the lists you hav e programmed. If you ha ven't prog rammed any IDs , ERROR appears f or a fe w seconds. 2. T o remov e a Scan List from active scanning, press the number of the Scan List on y our ke ypad. The Scan List indicator turns off, and the IDs in that list are not scanned. Note : One Scan L[...]

  • Seite 53

    45 Setting Priority in T runking Mode Y ou can set prior ity in your trunking lists, just as y ou do in your con ventional ones . Y ou can set the prior ity by pressing and holding PRI f or 2 seconds. After you’ve set up y our Scan List, press PRI to activate it. It’ s ver y similar to conv entional priority although there is no “interrupt”[...]

  • Seite 54

    46 I-Call (Motorola/ED A CS) I-Calls are direct unit-to-unit transmissions that are not heard b y other system users. Y our BC780XL T can receive these tr ansmissions. How y ou receive I-Calls depends on whether you are in Search or Scan mode . During I-Call reception the display will sho w the Unit ID number of either the transmitting or receiving[...]

  • Seite 55

    47 I-CALLS IN SCAN AND MANU AL MODE Y ou can store I-Call IDs in scanlists, just like talkg roup IDs, f or use by ID Scan and Man ual modes. T o program a specific I-Call Unit ID into a scanlist: ED A CS or Motorola T ype 1 Enter f ollowed b y the Unit ID digits, then E . Motorola T ype 2 Enter 7 f ollowed b y the Unit ID digits, then E . HINT - Th[...]

  • Seite 56

    48 TR UNK SEARCH : This mode works similarly to TR UNK SCAN. If the scanner finds any (non-lock ed-out) ID when it checks the control channel, y ou will hear it. Y ou will then hear any replies that f ollow within tw o seconds (or whatev er dela y you ma y hav e set). After that the scanner will mov e on and not continuously search the system f or [...]

  • Seite 57

    49 E DAC S ® Reception E DAC S ® T racking T runkT rac ker III no w allows trac king of ED ACS ® trunked systems. Until now these widely used systems hav e been almost impossible to monitor with a con v entional scanner . With your T runkT rac ker III listening to ED ACS(s) is remarkably easy , and perhaps e ven easier than conv entional scannin[...]

  • Seite 58

    50 An ED ACS ® T runked system This char t shows how talkg roups are organized within an ED A CS system at the AGENCY le vel. The individual talkgroups cannot be shown at this scale because there are ov er 2000. Howe ver the char t can show the 16 Agencies in this e xample. The system is logical and easy to understand. ED A CS systems are typicall[...]

  • Seite 59

    51 Special ED ACS ® Features AFS P artial Entr y Feature AFS is Uniden's method of encoding ED A CS talkgroups . AFS stands for 'Agency-Fleet-Subfleet'. AFS talkgroups are used in all ED A CS reception -- in ID SEARCH, ID LOCK OUT and ID SCAN scanlists. The powerful AFS P ar tial Entry feature designed into the BC780XL T lets you us[...]

  • Seite 60

    52 LT R ® Reception LT R ® T racking LT R ® (Logic T runked Radio) systems are trunking systems used primar ily by b usiness or private communications service providers, such as taxicabs , delivery trucks, and repair ser vices. These systems encode all trunking information as digital subaudible data that accompanies each transmission. Users on a[...]

  • Seite 61

    53 Motor ola Reception Motorola T racking There are really two types of Motorola trunking systems. These are usually referred to as T ype I and T ype II systems. T ype I only occurs on some 800 MHz systems. All VHF , UHF and 900 MHz trunking systems use T ype II. One impor tant distinction between these two systems is the amount of data transmitted[...]

  • Seite 62

    54 Fleet Map Programming If you ha ve prog rammed a trunk tracking bank f or Motorola type and press TRUNK to star t Multi-T rac k, you will see user IDs displa y on your screen. Since the BC780XL T defaults to T ype II systems, all the IDs will appear as n umbers. Howe ver , if you notice a mix of odd and e ven user IDs , for e xample 6477, 2560, [...]

  • Seite 63

    55 3. Select the size code f or the first bloc k using s , t , or VFO . 4. Press E , SELECT , or VFO . The ne xt av ailable b lock displa ys. 5. Repeat step 3 and 4 until you hav e selected a size code f or each bloc k. F or details about each size code, see Fleet Map Siz e Codes in the Appendix. Programming a Hybrid System A Hybrid system is simpl[...]

  • Seite 64

    56 7. Enter a new offset channel with the ke ypad. Note : Y ou can only input within a range of 380-759. 8. Press E . The displa y changes for entering the ne xt base frequency . 9. T o exit from this mode , press MENU repeatedly . Note : • If the system is not trac king properly , you ma y need to tr y a new base frequency or offset channel or y[...]

  • Seite 65

    57 Control Channel Onl y Mode When this function is activated, trunking is perf ormed using control channel data only . V oice channel (also known as "working channel") frequencies do not ha ve to be progr ammed into memor y . When using this feature , the scanner will display "CC" and channel activity indicator bars will not op[...]

  • Seite 66

    58 Disconnect T one Detect Option (End Code) When this function is disabled, the r adio looks for squelch bef ore retur ning to the control channel instead of waiting f or the disconnect tone. Only in rare instances will you need to adjust the def ault settings. The condition to return to control channels depends on whether the signal is present or[...]

  • Seite 67

    59 Remote Interface Y ou can communicate and program y our BC780XL T in numerous wa ys with per ipheral de vices using the Remote Interface Cab le por t. This radio off ers the follo wing modes: v SMAR TSCAN MODE A utomatically load frequencies, trunking talkgroups and fleetmaps from the Uniden National F requency Database server into your scanner [...]

  • Seite 68

    60 T o connect Scanner to External Modem: Plug the scanner end of the RS232C straight interf ace cable into the remote port on the rear of your scanner . Plug the other end of the cable (DB-9 serial connector) into the external modem. Y ou ma y need a DB-9 to DB-25 (or DB-9) null modem adapter , av ailable at most computer stores. Of course, mak e [...]

  • Seite 69

    61 6. After clear ing, the DIAL START message appears. Press 1 to star t dialing. 7. If the connection is successful, the scanner star ts frequency downloading. COMPLETE will be displa yed when your do wnloading is completed. 8. T o star t the scanner , tur n the unit off then on. If downloading is not successful, one of the f ollowing error messag[...]

  • Seite 70

    62 Menu f or SmartScan In the menu mode (SYSTEM D A T A - SMAR T SCAN), you can change se ver al parameters used f or Smar tScan. • Bank lock • T ransf er speed • Flow control setting • Dial type Bank Lock Smar tScanner will ov erwrite frequencies that you hav e already programmed into y our scanner . T o sav e the pre viously programmed fr[...]

  • Seite 71

    63 Flow Contr ol Y ou can choose the follo wing flow control settings. Xon/Xoff is the def ault. The initial displa y appears. Press HOLD/ s f or RTS/CTS . Press HOLD/ s again f or non flow control. Press HOLD/ s again to turn off the flow control. Press E when desired setting is displa yed. Dial T ype Y ou can choose the Dial T ype setting. T ONE [...]

  • Seite 72

    64 The Smar tScanner database downloads frequency and trunking talkgroups (if applicable f or your area) to the scanner using the f ollowing order : 1. All licenses within your zip code. 2. All licenses within your community (with more than one zip code) 3. All your county licenses (such as County Sheriff) 4. All the licenses for all the communitie[...]

  • Seite 73

    65 Remote (PC Control) Mode T o connect Scanner to PC: Plug the scanner end of the RS232C straight interf ace cable into the remote port on the rear of your scanner . Plug the other end of the cable (DB-9 serial connector) into a personal computers serial por t. A few PCs ma y require an adapter , most will not. Y ou may need a DB-9 to DB-25 n ull [...]

  • Seite 74

    66 Change T ransfer Speed T o change transf er speed, enter into the menu mode. 1. Press MENU . 2. Press s or t to select SYSTEM D A T A and then press E . 3. Press s or t to select PC CONTROL and then press E . 4. T o change the transf er speed, press s or t . Then press E . Clone Mode Y ou will need to purchase an RS232C cable and a null modem ad[...]

  • Seite 75

    67 5. On the scanner that is the “Sla ve Unit”, select SLAVE , then press E . 6. Press the SCAN key on both scanners . The data transfer is started from the Master Unit to the Slav e Unit. During the data transfer , both scanners show the f ollowing displa ys. When the data transf er is completed, COMPLETE displa ys. If the data transf er is no[...]

  • Seite 76

    68 The f ollowing additional f eatures are designed for y ou to customize y our scanner . Once these f eatures hav e been tur ned on or off , they will remain as the y are set until you reset them, e ven if y ou tur n the scanner off and then on again. Dimmer T o change brightness of the display: 1. Press MENU . 2. Press E to select SYSTEM D A T A.[...]

  • Seite 77

    69 Rever se Mode This ke y will allow the user to observe the re verse frequency of the repeater . While pressing /R VRS , the standard pair frequency will be displa yed. For a list of the standard pair frequencies, ref er to the table “Rev erse List” in the Appendix. If the frequency that you ha ve chosen does not hav e an offset frequency , t[...]

  • Seite 78

    70 Care and Maintenance General Use • T urn the scanner off before disconnecting the po wer . • Alwa ys write down the programmed frequencies in the e vent of memory loss. • If memor y is lost, simply reprogram each channel. The display sho ws 000.0000 in all channels when there has been a memor y loss. • Alwa ys press each button firmly un[...]

  • Seite 79

    71 T roub leshooting Problem Suggestion Scanner won’t work. 1. Check the connections at both ends of the A C Adapter . 2. T ur n on the wall switch of y our room. Y ou could be using an outlet controlled by the w all switch. 3. Mov e the A C Adapter to another wall outlet. Improper reception. 1. Check the antenna connection or mo ve and repositio[...]

  • Seite 80

    72 Problem Suggestion Scanner won’t trac k. 1. Ma y not be a system which can be trac ked b y your scanner . Make sure you press and hold TRUNK f or 2 seconds to enter into trunk mode. 2. Missing the data frequency . 3. Change to a T ype 1 Scanner setup. Re view Fleet Map Progr amming on page 54. Scanner won’t stop 1. No IDs hav e been programm[...]

  • Seite 81

    73 Specifications Cer tified in accordance with FCC Rules and Regulations P ar t 15, Subpar t C , as of date of manuf acture. Channel: 500 Banks: 10 (50 channels each) Ser vice Bands: 11 preprogrammed search bands (including the NOAA Weather Service band) F requency Range: 25.0-28.0 MHz P etroleum Prod., CB Class D channels, Business and F orest Pr[...]

  • Seite 82

    74 Glossary of T erms Glossary of terms . Alpha tag - This ter m ref ers to an alphanumeric text tag that y ou can enter to describe the individual frequencies that you ha ve prog rammed. Rather than having to associate a specific frequency to the individuals that are using it, you can enter the actual name of the group . This will eliminate the ne[...]

  • Seite 83

    75 Enter Lock - This is the ter m used for locking the k eypad. This pre vents accidental re-programming of channels and talkg roups entered into memor y . The default setting is off . When ENTER LOCK is enabled, the follo wing functions will be disable: • Enter or modify the Channel frequency • Enter or modify the T one information • Enter o[...]

  • Seite 84

    76 Screen mask - Screen Mask reduces the amount of information that appears on the displa y . Alpha tags that y ou hav e set f or a channel along with a fe w function icons will appear only on the displa y . This mode is par ticular ly useful in public saf ety vehicles where that are already ov erloaded with information. Screen Mask does not wor k [...]

  • Seite 85

    77 Preset Map 1 Siz e Code S11 S11 S11 S11 S11 S11 S11 Block 1 0 2 3 4 5 6 7 S11 Preset Map 2 Siz e Code S4 S4 S4 S4 S4 S4 S4 Block 1 0 2 3 4 5 6 7S 4 Preset Map 3 Siz e Code S4 S4 S4 S4 S4 S4 S12 Block 1 0 2 3 4 5 6 7- - Preset Map 5 Siz e Code S4 S4 S12 -- S4 S4 S4 Block 1 0 2 3 4 5 6 7S 4 Preset Map 7 Siz e Code S10 S10 S11 S4 S4 S4 S4 Block 1 0[...]

  • Seite 86

    78 Preset Map 9 Siz e Code S4 S4 S0 S0 S0 S0 S0 Block 1 0 2 3 4 5 6 7S 0 Preset Map 11 Size Code S0 S4 S0 S0 S0 S0 S0 Block 1 0 2 3 4 5 6 7S 0 Preset Map 13 Size Code S3 S3 S11 S4 S4 S0 S0 Block 1 0 2 3 4 5 6 7S 0 Preset Map 15 Size Code S4 S4 S4 S11 S11 S0 S12 Block 1 0 2 3 4 5 6 7- - Preset Map 16 Size Code S10 S3 S10 S11 S0 S0 S12 Block 1 0 2 3 [...]

  • Seite 87

    79 User Defined Fleet Maps T ype I Programming Information When a T ype I system is designed, the address information for all the IDs is divided into 8 equal sized b locks , numbered 07. When you progr am your scanner to trac k a T ype I system, you m ust select a size code f or each of these bloc ks. When you hav e assigned a size code to all 8 bl[...]

  • Seite 88

    80 Fleet Map Size Codes Size Code Restrictions If you select siz e code 12, 13, or 14, there are some restrictions as to which blocks can be used f or these codes. • SIZE CODE 12 can only be assigned to Blocks 0, 2, 4, or 6. • SIZE CODE 13 can only be assigned to Blocks 0 and 4. • SIZE CODE 14 can only be assigned to Block 0. Since these size[...]

  • Seite 89

    81 Event Code Standard Event Level (Siren Type) LCD Display Warning Watch Statement Test Hurricane/Tropical Storm Warning HUW 0 HURRICANE Tsunami Warning TSW 0 TSUNAMI Coastal Flood Warning CFW 0 COASTAL FLOOD Special Marine Warning SMW 0 SPECIAL MARINE Avalanche Warning AVW 0 AVALANCHE Volcano Warning VOW 0 VOLCANO Shelter In Place Warning SPW 0 S[...]

  • Seite 90

    82 Range Offset 29.520 - 29.580 +0.1 MHz 29.620 - 29.680 -0.1 MHz 52.010 - 52.990 +1 MHz 53.010 - 53.990 -1 MHz 143.750 +4.375 MHz 143.900 +4.25 MHz 144.510 - 144.890 +0.6 MHz 145.110 - 145.490 -0.6 MHz 146.010 - 146.385 +0.6 MHz 146.415 - 146.505 +1 MHz 146.595 +1 MHz 146.610 - 146.985 -0.6 MHz 147.000 - 147.390 +0.6 MHz 147.415 - 147.505 -1 MHz 1[...]

  • Seite 91

    83 CTCSS Frequency List (Hz) DCS T one Code bc780xlt appendix.qxd 10/08/2000 4:51 PM Page 83[...]

  • Seite 92

    84 Memo bc780xlt appendix.qxd 10/08/2000 4:51 PM Page 84[...]

  • Seite 93

    85 Memo bc780xlt appendix.qxd 10/08/2000 4:51 PM Page 85[...]

  • Seite 94

    86 Memo bc780xlt appendix.qxd 10/08/2000 4:51 PM Page 86[...]

  • Seite 95

    bc780xlt foldouts.qxd 10/11/2000 10:37 AM Page 7[...]

  • Seite 96

    bc780xlt foldouts.qxd 10/08/2000 4:50 PM Page 8[...]

  • Seite 97

    bc780xlt foldouts.qxd 10/08/2000 4:50 PM Page 9[...]

  • Seite 98

    bc780xlt foldouts.qxd 10/08/2000 4:50 PM Page 10[...]

  • Seite 99

    One Y ear Limited W arranty Important : Evidence of original purchase is required for w arranty service. W ARRANTOR : UNIDEN AMERICA CORPORA TION (Uniden) ELEMENTS OF W ARRANTY : Uniden w arrants, f or one year , to the or iginal retail owner , this Uniden product to be free from def ects in materials and craftsmanship with only the limitations or [...]

  • Seite 100

    Cov ered under one or more of the f ollowing U .S. patents: 4,398,304 4,409,688 4,455,679 4,461,036 4,521,915 4,597,104 4,627,100 4,841,302 4,888,815 4,932,074 4,947,456 5,014,348 5,199,109 5,408,692 5,428,826 5,438,688 5,448,256 5,465,402 5,471,660 5,483,684 5,530,296 5,548,832 5,551,071 5,557,995 5,577,076 5,598,430 5,600,223 5,642,424 5,710,992 [...]