Savin 2555 Bedienungsanleitung

Savin 2555 Operating Instruct i ons COPY RE FERENCE Read this manual carefully before you use this product and keep it handy for future reference. For safety, p lease follow the instru ctions in t his manual.[...]

Directional Magnification (%) 101 2 Directional Magnification (%) Copies can be reduce d or enlarged at different reproducti on ratios horizontally and vertically. Note ❒ The following ratios c an be selected: • Metric version: 25 – 400% • Inch version: 25 – 400% ❒ You can select a ratio regardless of the size of an original or copy pap[...]

Co pyin g 102 2 B Press the [ Size Mag. ] key. C Press the [ D. Mag. ( %) ] key. To specify a r atio with t he [ n ] and [ o ] keys A Press the [ n o Keys ] key. B Press the [ Hori zont al ] key. C Adjust the ratio using the [ n ] or [ o ] key. Note ❒ Pressing the [ n ] or [ o ] key changes the rati o in 1% steps. Pres sing and holding down the [[...]

Directional Magnification (%) 103 2 To enter the ratio with the number keys A Press the [ Hori zont al ] key. B Enter the desired ratio with the n umber keys, followed by the [ # ] key. Note ❒ To change the ratio entered, press the [ Clear ] or { Clear /Stop } key and en- ter t he n ew rati o . C Press the [ Vertic al ] key. D Enter the desired r[...]

Co pyin g 104 2 Directional Size Magnification (inch) The suitable reproduction r atios will be automatically selec ted when you enter the horizontal and vertical lengths of the original and copy image you require. 1: Horizontal original size 2: Vertical original size 3: Horizontal copy s ize 4: Vertical copy size Preparation Specify the vertic al [...]

Directional Size Magnification (inch) 105 2 A Press the [ Reduce/ Enlarge ] key. B Press the [ Size Mag. ] key. C Press the [ D. Size M ag.(inch) ] key. D Enter the horizontal size of the original with the number keys, then press the [ # ] key. Note ❒ To change the value entered, press the [ Clear ] or { Cl ear/S top } key and enter the new value[...]

Co pyin g 106 2 Note ❒ To change the length, press the place you wish to change and enter the new val ue. H Press the [ OK ] key. I Press the [ OK ] key. J Set your origin als, then press the { Start } key.[...]

Duplex/Combine 107 2 Duplex/Combine You can make c opies in a variety of formats by combining the following modes: • 1 Sided/2 S ided ori ginals • 1 Sided/2 S ided cop ies •D u p l e x •C o m b i n e • Book •S e r i e s A Check your originals and se lect [ 1 Sided ] or [ 2 Si d ed ] for the originals. 1: 1-sided 2: 2-sided 3: Book B Sel[...]

Co pyin g 108 2 1: 1-sided 2: 2-sided A: Fr ont B: Ba ck C Press the [ OK ] key. 12 1 2 1 2 1234 5678 34 3 2 1 4 5 6 78 1 2 34 1 234 5678 9 10 11 12 13 14 15 16 ZBQS1 10E[...]

Duplex/Combine 109 2 Original D ir ect ion and Complet ed Copies The resulting co py image will differ according to the direction in wh ich you set your original (lengthwise K or widthwise L ). Note ❒ The illustr ations show the di rections of copied images on the front and back, not the directions of delivery. Original s and Cop y Direct io n Yo[...]

Co pyin g 110 2 Specifyi ng Orientation of Bou nd Ori ginals You can specify the orien tation of bound originals (how you turn the pages). The default s etting is [ Top to Top ] . Note ❒ You can change the orie ntation default with the User Tools. See “Copy Orien- tation in Duplex Mode” and “O riginal Orientation in Duplex Mode” in ⇒ P.[...]

Duplex 111 2 Duplex This function can be used in two ways: ❖ 1 Sided → 2 Sid ed This mode makes two-sided copies from one-sided originals. ❖ 2 Sided → 2 Sid ed This mo de mak es tw o-si ded c opies from t wo-sid ed origi nals. Limita tion ❒ You cannot use the following copy paper in this fun ction: • Paper smaller than A5 K , 5 1 / 2 &q[...]

Co pyin g 112 2 ❒ When original images are copied, the images are shifted by a width of the binding margin. You can adjust the binding margin or binding pos ition. You can also chan ge their default values. S ee “Front Margin: Left/Right”, “Back Margin: Left/Right”, “Front Margin: Top/Bo ttom” and “Back Margin: Top/ Bottom” in ⇒[...]

Duplex 113 2 B Set the next o riginal. When it is placed on the exposure g lass, pres s the { Start } key. C Press the { # } key after the last original has been sc anned. 2 Sided → 2 Sided A Press the [ Duplex/C ombine ] key. B Press the [ 2 Sided ] key for original, then press the [ 2 Sided ] key for co py. Note ❒ To change the copy orientati[...]

Co pyin g 114 2 When setti ng an ori ginal on the exposure glass or in the documen t feeder using Ba tch (SADF) mode Reference ⇒ P.36 “Batch (SADF) mode” . A Set the original, then press the { Start } key. Note ❒ Start with the first page to be copi ed. B Set the next o riginal. When it is placed on the exposure g lass, pres s the { Start }[...]

Comb ine 115 2 Combine You can combine two or more originals in to one copy. 1 Sided Combine mode is for 1-sided copies, an d 2 Sided Combine mode for 2-sided copies. This function can be used in twelve w ays: ❖ 1 Sided 2 Pages → Co mbin e 1 S ide Copies two 1-sided originals to one si de of a sheet. ❖ 1 Sided 4 Pages → Co mbin e 1 S ide Co[...]

Co pyin g 116 2 Note ❒ In this m ode, the machine s elects the reprod uction ratio automatically. This reproduction ratio depends on the copy pa per sizes and the number of origi- nals. ❒ The machine uses ratios in t he following range: • Metric version: 25 – 400% • Inch version: 25 – 400% ❒ A separation line betwee n originals can be[...]

Comb ine 117 2 1 Sided 2 Pages → Combine 1 Side Copies two 1-sided ori ginals to one side of a sheet. ❖ Setting originals (Originals set in the document feeder) • Originals read f rom left to right • Originals read f rom top to bottom A Press the [ Duplex/C ombine ] key. GC SHVY 7J 1 2 1 2 Combine5 3 4 1 2 4 3 2 1 Combine6 3 4 1 2 4 3 2 1[...]

Co pyin g 118 2 B Press the [ 1 Sided ] key for the original, then press the [ Combine 1 S ide ] key for the copy. C Press the [ 2 Original s ] key, then pr ess the [ OK ] key. D Select t he paper . E Set your origin als, then press the { Start } key.[...]

Comb ine 119 2 1 Sided 4 Pages → Combine 1 Side Copies four 1-side d originals together to one side of a sh eet. A Press the [ Duplex/C ombine ] key. B Press the [ 1 Sided ] key for the original, then press the [ Combine 1 S ide ] key for the copy. C Press the [ 4 Original s ] key, then pr ess the [ OK ] key. GC SHVY 8J 1 2 34 4 3 2 1[...]

Co pyin g 120 2 D Select t he paper . E Set your origin als, then press the { Start } key. 1 Sided 8 Pages → Combine 1 Side Copies eight 1-sided originals together to one side of a sheet. A Press the [ Duplex/C ombine ] key. GC SHVY 3J 1 234 5678 2 1 8 7[...]

Comb ine 121 2 B Press the [ 1 Sided ] key for the original, then press the [ Combine 1 S ide ] key for the copy. C Press the [ 8 Original s ] key, then pr ess the [ OK ] key. D Select t he paper . E Set your origin als, then press the { Start } key.[...]

Co pyin g 122 2 1 Sided 4 Pages → Combine 2 Side Copies four 1-side d originals to the two-page s pread on both sides of a sheet. A Press the [ Duplex/C ombine ] key. B Press the [ 1 Sided ] key for the original, then press the [ Combine 2 S ide ] key for the copy. C Press the [ 4 Original s ] key, then pr ess the [ OK ] key. GC SHVY 9J 4 3 2 1 3[...]

Comb ine 123 2 D Check the orientation. Note ❒ To change the copy orientation to “Top to Bottom”, press the [ Orientation ] key and se lect [ Top to Bottom ] . See ⇒ P. 110 “Specifying Orientation of Bound Origi nals ” . E Press the [ OK ] key. F Select t he paper . G Set your origin als, then press the { Start } key. 1 Sided 8 Pages ?[...]

Co pyin g 124 2 A Press the [ Duplex/C ombine ] key. B Press the [ 1 Sided ] key for the original, then press the [ Combine 2 S ide ] key for the copy. C Press the [ 8 Original s ] key, then pr ess the [ OK ] key. D Check the orientation.[...]

Comb ine 125 2 Note ❒ To change the copy orientation to “Top to Bottom”, press the [ Orientation ] key and se lect [ Top to Bottom ] . See ⇒ P. 110 “Specifying Orientation of Bound Origi nals ” . E Press the [ OK ] key. F Select t he paper . G Set your origin als, then press the { Start } key. 1 Sided 16 Page s → Combine 2 Side Copies[...]

Co pyin g 126 2 B Press the [ 1 Sided ] key for the original, then press the [ Combine 2 S ide ] key for the copy. C Press the [ 16 Origi nals ] key, then pres s the [ OK ] key. D Check the orientation. Note ❒ To change the copy orientation to “Top to Bottom”, press the [ Orientation ] key and se lect [ Top to Bottom ] . See ⇒ P. 110 “Spe[...]

Comb ine 127 2 2 Sided 2 Pages → Combine 1 Side Copies one 2-sided original to one side of a sheet. A Press the [ Duplex/C ombine ] key. B Press the [ 2 Sided ] key for the original, then press the [ Combine 1 S ide ] key for the copy. C Press the [ 2 Pages ] key, then press the [ OK ] key. GC SHVY OJ 1 2 2 1[...]

Co pyin g 128 2 D Check the orientation. Note ❒ To change the copy orientation to “Top to Bottom”, press the [ Orientation ] key and se lect [ Top to Bottom ] . See ⇒ P. 110 “Specifying Orientation of Bound Origi nals ” . E Press the [ OK ] key. F Select t he paper . G Set your origin als, then press the { Start } key. 2 Sided 4 Pages ?[...]

Comb ine 129 2 B Press the [ 2 Sided ] key for the original, then press the [ Combine 1 S ide ] key for the copy. C Press the [ 4 Pages ] key, then press the [ OK ] key. D Check the orientation. Note ❒ To change the copy orientation to “Top to Bottom”, press the [ Orientation ] key and se lect [ Top to Bottom ] . See ⇒ P. 110 “Specifying [...]

Co pyin g 130 2 2 Sided 8 Pages → Combine 1 Side Copies four 2-side d originals to one side of a sheet. A Press the [ Duplex/C ombine ] key. B Press the [ 2 Sided ] key for the original, then press the [ Combine 1 S ide ] key for the copy. C Press the [ 8 Pages ] key, then press the [ OK ] key. GC SHVY 4J 8 7 6 5 4 3 2 1 1 234 5678[...]

Comb ine 131 2 D Check the orientation. Note ❒ To change the copy orientation to “Top to Bottom”, press the [ Orientation ] key and se lect [ Top to Bottom ] . See ⇒ P. 110 “Specifying Orientation of Bound Origi nals ” . E Press the [ OK ] key. F Select t he paper . G Set your origin als, then press the { Start } key. 2 Sided 4 Pages ?[...]

Co pyin g 132 2 B Press the [ 2 Sided ] key for the original, then press the [ Combine 2 S ide ] key for the copy. C Press the [ 4 Pages ] key, then press the [ OK ] key. D Check the orientation. Note ❒ To change the copy orientation to “Top to Bottom”, press the [ Orientation ] key and se lect [ Top to Bottom ] . See ⇒ P. 110 “Specifying[...]

Comb ine 133 2 2 Sided 8 Pages → Combine 2 Side Copies four 2-side d originals together to both sides of a sheet. 1. Front 2. Back A Press the [ Duplex/C ombine ] key. B Press the [ 2 Sided ] key for the original, then press the [ Combine 2 S ide ] key for the copy. GCSHVY2E 12 8 7 6 5 4 3 2 1 5 6 78 1 2 34[...]

Co pyin g 134 2 C Press the [ 8 Pages ] key, then press the [ OK ] key. D Check the orientation. Note ❒ To change the copy orientation to “Top to Bottom”, press the [ Orientation ] key and se lect [ Top to Bottom ] . See ⇒ P. 110 “Specifying Orientation of Bound Origi nals ” . E Press the [ OK ] key F Select t he paper . G Set your orig[...]

Comb ine 135 2 2 Sided 16 Page s → Combine 2 Side Copies eight 2-sided originals together to both sides of a sheet. 1. Front 2. Back A Press the [ Duplex/C ombine ] key. B Press the [ 2 Sided ] key for the original, then press the [ Combine 2 S ide ] key for the copy. GCSHVY6E 1 234 5678 2 1 9 10 11 12 13 14 15 16 4 3 2 1 16 15 14 13[...]

Co pyin g 136 2 C Press the [ 16 Pages ] key, then press the [ OK ] key. D Check the orientation. Note ❒ To change the copy orientation to “Top to Bottom”, press the [ Orientation ] key and se lect [ Top to Bottom ] . See ⇒ P. 110 “Specifying Orientation of Bound Origi nals ” . E Press the [ OK ] key. F Select t he paper . G Set your or[...]

Series/Book 137 2 Series/Boo k Series copies are made by sep arately copying the front and back of a 2-sided original or the two facing pages of a spread original onto two s heets of paper. A book is ma de by copyi ng tw o or m ore ori gina ls i n page order. The following types of Serie s and Book modes can be used: Series Copies ❖ Book → 1 Si[...]

Co pyin g 138 2 Series Co pies Book → 1 Sided You can m ake one-sided c opies from two facin g pages of a bou nd original (book). Note ❒ See the following table when you select original and copy paper sizes with 100% ratio: ❖ Metric vers ion ❖ Inch version A Press the [ Duplex/C ombine ] key. Origina l Copy pape r A3 L A4 K × 2 sheets B4 L[...]

Series/Book 139 2 B Press the [ Book ] key. C Press the [ Book → 1 Sided ] key. D Press the [ OK ] key. E Press the [ OK ] key. F Make su re that the [ Au to Pa per Se lec t ] key is selected. Note ❒ If the [ Auto Pa per Selec t ] key is not se lected, press the [ Aut o Pap er Sel ect ] key. G Set your origin als, then press the { Start } key. [...]

Co pyin g 140 2 A Press the [ Duplex/C ombine ] key. B Press the [ 2 Sided ] key for the original, then press the [ 1 Sided ] key for the copy. C Check the orientation. Note ❒ To change the original orientation to “Top to Bottom”, press the [ Orienta- ti on ] key, then select [ Top to Bottom ] . See ⇒ P.110 “Specifying Orientation of Boun[...]

Series/Book 141 2 ❒ If the calculated ratio is under the available minimum ratio, it will be adju sted to the minimum ratio. However, with some ratios, parts of the image might not be copied. ❒ Even if the direction of originals is different from that of the cop y paper, the machine will automatically rotate the image by 90 ° to make copies pr[...]

Co pyin g 142 2 A Press the [ Duplex/C ombine ] key. B Press the [ Book ] key. C Press the [ Book → 2 Sided ] key. D Press the [ Book → 2 Sided ] key. E Press the [ OK ] key. F Select t he paper . G Set your origin als, then press the { Start } key.[...]

Series/Book 143 2 Mu lti → 2 Sided Copies each two-page spread original as it is onto both sides of a sheet. Note ❒ See the following table when you select original and copy paper sizes with 100% ratio: ❖ Metric vers ion ❖ Inch version A Press the [ Duplex/C ombine ] key. Origina l Copy pape r A3 L A4 (2-sid ed) B4 L B5 (2-sid ed) A4 L A5 ([...]

Co pyin g 144 2 B Press the [ Book ] key. C Press the [ Book → 2 Sided ] key. D Press the [ Multi → 2 Sided ] key. E Press the [ OK ] key. F Select t he paper . G Set your origin als, then press the { Start } key. Note ❒ When placing one original on the exposu re glass or in the document feeder in Batch (SADF) mode, press the { # } key after [...]

Series/Book 145 2 Booklet Make copies in page order f o r a folded booklet as shown in the following illus- trations: ❖ Portrait ❖ Landscape Important ❒ Before selec ting this functi on, select “ Portrait” or “Landsc ape” with the User Tools. See “Booklet/Magazine Original Orientation” in ⇒ P.320 “Page Fo rmat 2 / 2 ” . Note[...]

Co pyin g 146 2 How to fold co pies to make a booklet 1. Portrait 2. Landscape A Press the [ Duplex/C ombine ] key. B Press the [ Book ] key. GCBOOK2E 3 1 3 1 12[...]

Series/Book 147 2 C Press the [ Booklet ] key, followed by the [ OK ] key. D Select t he paper . E Set your origin als, then press the { Start } key. Note ❒ When placing one original on the exposu re glass or in the document feeder in Batch (SADF) mode, press the { # } key after all originals are sc anned. Magazine Copies two or more originals to[...]

Co pyin g 148 2 ❖ Landscape Important ❒ Before select ing this function, select “P ortrait” or “Lands cape” with the User Tools. See “Booklet/Magazine Original Orien tation” in ⇒ P.320 “Page Forma t 2 / 2 ” . Note ❒ To use this fu nction with two-s ided originals , select this func tion from the Shortcut Keys. See “Shortcu[...]

Series/Book 149 2 How to fo ld and unfold copies to make a magazin e ❖ Portrait ❖ Landscape Note ❒ If you select “Saddle Stitch” with the optional booklet finisher in Magazine mode, the machine s taples the pap er, and folds it like a book, then delivers the folded pages. Limita tion ❒ If you select “Saddle Stitch” with the optional[...]

Co pyin g 150 2 B Press the [ Book ] key. C Press the [ Magazine ] key, followed by the [ OK ] key. D Select t he paper . E Set your origin als, then press the { Start } key. Note ❒ When placing one original on the exposu re glass or in the document feeder in Batch (SADF) mode, press the { # } key after all originals are sc anned.[...]

Cover/Slip Sheet 151 2 Cover/Slip Sheet Using this functi on, you can add or insert cover or pa per designate. There are four typ es in this function: ❖ Front Cover The first page of your originals i s copied on a specif ic paper sheet for covers. ❖ Front/Back Covers The first and last pages of your originals are copied on specific paper sheets[...]

Co pyin g 152 2 ❖ Copy ❖ Blank Note ❒ You can specify whether to make a copy on a sheet for covers. If you select [ Copy ] , the first page will be c opied on the cover sheet. If you select [ Blank ] , a cover sheet will jus t be inserted before the first copy. ❒ When ch oosing [ Copy ] , select whether the front an d back covers are copied[...]

Cover/Slip Sheet 153 2 B Press the [ Front Cover ] key. C Select [ Copy ] or [ Blan k ] for a cover sheet, and then press the [ OK ] key. D Select t he paper tray con taini ng the non- cover shee t paper. E Set your origin als in the document feeder, then press the { Star t } key.[...]

Co pyin g 154 2 Front/Ba ck Covers The first and las t pages of your originals are copied on specific pa per sheets for covers. ❖ Copy ❖ Blank Note ❒ You can specify whether to make a copy on a cover sheet. If you select [ Copy ] , the first and las t pages will be copied on the cover s heets. If you select [ Blan k ] , a cover sheet wi ll ju[...]

Cover/Slip Sheet 155 2 A Press the [ Cover/ Slip Sh eet ] key. B Press the [ F/ B Cover ] key. C Select [ Copy ] or [ Blan k ] for the cover sheets, and then press the [ OK ] key. D Select t he paper tray con taini ng the non- cover shee t paper. E Set your origin als in the document feeder, then press the { Star t } key.[...]

Co pyin g 156 2 Designa te Use this function to have cer tain pages of your original copied onto slip sheets. Preparation Before using thi s function, set the speci al paper tray for slip sheets . See “Slip Sheet 1”, “Slip Sheet 2” in the System Settings manual. Limita tion ❒ You ca nnot use th is function w ith Slip Sh eet mode. Note ❒[...]

Cover/Slip Sheet 157 2 B Press the [ Designate /Chapter ] key. C Press the key to select the chapter number. D Enter the page number of the original's location you want to copy onto a slip sheet with the number keys. Then, press the { # } key. Note ❒ To change the value entered, press the [ Clear ] or { Cl ear/S top } key and enter the new v[...]

Co pyin g 158 2 Note ❒ To select chapters 11 to 20, press the [ T 11-20 ] key. I When you wish to finish specifying page location, press the [ OK ] key. This displa y shows example set tings. Note ❒ To change the number entered, enter the new num ber in the s ame way as steps C to G . J Select t he paper tray con taini ng the non- slip sheet pa[...]

Cover/Slip Sheet 159 2 Preparation Before selecting this func tion, press the [ Duplex/ Combine ] key and select Du- plex (1 S ided → 2 Sided) mo de or Combine mode. Limita tion ❒ You ca nnot use th is function w ith Slip Sh eet mode. Note ❒ You can sp ecify the pages up t o 20. ❒ This function can be used only when you use the Duplex (1 Si[...]

Co pyin g 160 2 D Press the [ Chapt ers ] key. E Enter the page location of the first page of th e first chapter with the numb er keys. Then, press the { # } key. Note ❒ To change the value entered, press the [ Clear ] or { Cl ear/S top } key and enter the new value. F Press the [ OK ] key. Note ❒ To display the se ttings for the next ch apter,[...]

Cover/Slip Sheet 161 2 Note ❒ To change the number entered, enter the new num ber in the s ame way as in steps C to F . I Set your origin als, then press the { Start } key.[...]

Co pyin g 162 2 Slip Sheets Every time th e original's page c hanges, a sli p sheet is inser t ed. This fun ction can be used to insert a slip s heet automatically between each OHP transparenc y cop- ied or used as a stack function. Y ou can also copy onto the inserted sli p sheets. Preparation Before selecting this function, specify the paper[...]

Slip Sheets 163 2 Limita tion ❒ When copying two or more originals using th e bypass tray, the copies are de- livered in the reversed page order. Note ❒ Press the { # } key and s et the “Special Paper” s etting to [ OHP ] . See ⇒ P.76 “Whe n Copying onto OHP T ranspar encies or Thick P aper” . ❒ When you selec t [ OHP ] , copy paper[...]

Co pyin g 164 2 D Select t he paper tray con taini ng the non- slip sheet pa per. When using OHP transparencie s, open the bypass tray. E Set your origin als, then press the { Start } key.[...]

Double Copies 165 2 Double Copies One original image is copied twice on one copy as shown in the illustration. Limita tion ❒ The following original s cannot be detected pr o perly on the exposu re glass. Be sure to select the copy paper ma nually or set the originals in the document feeder. ❒ You ca nnot use th e bypass tray wi th this func tio[...]

Co pyin g 166 2 ❖ Inch version A Press the [ Edit/Stamp ] key. B Press the [ Double ] key. C Press the [ OK ] key. D Select t he paper . E Set your origin als, then press the { Start } key. Original Size and Di rection Copy Pap er Size and Direction 5 1 / 2 " × 8 1 / 2 " L 8 1 / 2 " × 11" K 5 1 / 2 " × 8 1 / 2 " K[...]

Image Repeat 167 2 Image Repeat The original image is c opied repeatedly. Note ❒ The number of repea ted images depends on the original size, copy p aper size, and reproduction ratio. See the following table: ❖ Original: A5 K /Copy paper: A 4 K or Original: A5 L /Copy paper A4 L ❖ Original: A5 K /Copy paper: A 4 L or Original: A5 L /Copy pape[...]

Co pyin g 168 2 B Press the [ Edit/Stamp ] key. C Press the [ Repeat ] key. D Specify the area to be repeated. To repea t the wh ole image of the or iginal A Press the [ All are a ] key.[...]

Image Repeat 169 2 To repea t the imag e of the selected area A Press the [ Selec ted area ] key. B Enter the horizontal size of the area with the number keys, then press the [ # ] key. Note ❒ To change the number entered, pres s the [ Clear ] or { Clear/St op } key and enter the new number. C Enter the vertical size of the area with the number k[...]

Co pyin g 170 2 Margin Adjustment You can shift the image left, right, top or bottom to make a binding margin. Limita tion ❒ If you set the margin too wide , areas you do not want to delete m ight be erased. Note ❒ You can change the width of the bin ding margin as follows: ❒ The margin width default is as follows. You ca n change this defaul[...]

Margin Adjustment 171 2 A Press the [ Edit/Stamp ] key. B Press the [ Margin Adj. ] key. C Set a bind ing margin for a front page. Press the [ ← ] and [ → ] keys when set- ting the left and right margins, and the [ ↓ ] and [ ↑ ] keys when setting the top and bottom margins. Note ❒ To change the value entered, pres s the [ ← ] , [ → ] [...]

Co pyin g 172 2 Erase This function erases the c enter and/or all four s ides of th e original image. This is useful for avoiding shadows on the copy image caused by the bound originals, such as books . This function can be u sed in three ways: ❖ Bord er This mode erases the edge margin of the original image. ❖ Center This mode erases the cente[...]

Erase 173 2 ❖ Inch version *1 You can select fro m 8 1 / 2 " × 13", 8 1 / 4 " × 1 3" an d 8" × 13" with the User Too l s (Sys- tem Settings). See “<F/F4>Size Sett ing” in the System Sett ings manual. ❒ The relationship between the original o rientation and the erased part is as fol- lows: ❒ 1: Erased[...]

Co pyin g 174 2 A Press the [ Edit/Stamp ] key. B Press the [ Eras e ] key. C Press the [ Border ] key. D Set the erase borde r width. Selecting [ Same Widt h ] A Press the [ Same Wi d th ] key.[...]

Erase 175 2 B Set an erase border width with the [ n ] and [ o ] keys, followed by the [ OK ] key. Note ❒ To change the value entered, press the [ n ] and [ o ] keys and en ter the new v alu e. Selecting [ 4 Sid es ] A Press the [ 4 Sides ] key. B Press the key for the border you wish to change and set an erase border width wi th th e [ n ] and [[...]

Co pyin g 176 2 A Press the [ Edit/Stamp ] key. B Press the [ Eras e ] key. C Press the [ Center ] key. D Set the erase center width with the [ n ] and [ o ] keys. Then press the [ OK ] key. Note ❒ To change the value entered, press the [ n ] and [ o ] keys and enter the new val ue. E Set your origin als, then press the { Start } key.[...]

Erase 177 2 Center/Bo r der Era se This mode erases both the center and edge margins. You can set the same margin width for all four s ides and center, or you can se t different margin widths f or each. A Press the [ Edit/Stamp ] key. B Press the [ Eras e ] key. C Press the [ Center/B order ] key. D Set the erase margin width.[...]

Co pyin g 178 2 Selecting [ Same Widt h ] A Press the [ Center ] key, t hen set the erase center width with the [ n ] and [ o ] keys . Note ❒ To change the value entered, press the [ n ] and [ o ] keys and en ter the new v alu e. B Press the [ Same Wi d th ] key. C Press the [ Border ] key, then set the erase border width with the [ n ] and [ o ][...]

Centering 179 2 Centering You can make copies by moving the image to the center of the copy paper. Limita tion ❒ You ca nnot use th e bypass tray wi th this func tion. ❒ If the direction of or iginals is different from that of the copy p aper, the ma- chine will not r otate the image by 90 ° (rotated copy). ❒ If the original size cannot be m[...]

Co pyin g 180 2 B Press the [ Edit/Stamp ] key. C Press the [ Centerin g ] key. D Press the [ OK ] key. E Set your origin als, then press the { Start } key.[...]

Stamp 181 2 Stamp This function prints s tamp on the copies. Stamp modes are as follows : ❖ Background Numbering This function pr ints numbers on the background of copies. ❖ Preset S t amp This function pr ints preset messages on c opies. ❖ User Stamp This fun ction prints custom messages on copies. ❖ Date Stamp This fun ction prints the da[...]

Co pyin g 182 2 A Press the [ Edit/Stamp ] key. B Press the [ Stam p ] key. C Press the [ Backgr ound Numbering ] key. D Enter the number to start counting from with the number keys. Then press the [ OK ] key. Note ❒ The number can be set fr om 1 to 999. ❒ To change the entered number, press the [ Clear ] or { Clea r/Stop } key and en- ter the [...]

Stamp 183 2 E Press the [ OK ] key. F Set your origin als, then press the { Start } key. Preset St amp Limita tion ❒ You ca nnot use th e bypass tray wi th this func tion. ❒ One message can be stamped a t a time. Note ❒ One of the following eight messages can be stamped on copies with a frame around it: “COPY”, “URGENT”, “PRIORITY?[...]

Co pyin g 184 2 ❒ The relationship between the dire ction in which you set the original a n d stamp orientation/position is as follows: ❒ You can change the stamp position to top, bottom, left and right each way in 1mm, 0.1" steps. See “Stamp position” in ⇒ P.323 “Preset Stamp” . A Press the [ Edit/Stamp ] key. B Press the [ Stam[...]

Stamp 185 2 C Press the [ Pres et Stamp ] key. D Select the de sired message. E Press the [ All Pages ] or [ 1st Pa ge O nly ] key to select the print page. Limitatio n ❒ If you combine this function with the Magazine or Booklet function, “1s t Page Only” is selected automatically. F Change the stamp position, size or density. If you do not w[...]

Co pyin g 186 2 B Select t he desir ed posit ion, size and d ensity . C Press the [ OK ] key. G After you specified all the desired settings, press the [ OK ] key. H Press the [ OK ] key. Note ❒ To cancel the settings, p ress the [ Can cel ] key. I Set your origin als, then press the { Start } key. User S tamp Up to four messages which you us e f[...]

Stamp 187 2 Limita tion ❒ You ca nnot use th e bypass tray wi th this func tion. ❒ One message can be stamped a t a time. ❒ In Connect Copy mode, r egister the same user s tamp on the master unit and sub-unit. ❒ If the position excee ds the page boundary, the stamp will not be printed on copies. Note ❒ You can change the p rint page with [...]

Co pyin g 188 2 A Press the [ Edit/Stamp ] key. B Press the [ Stam p ] key. C Press the [ User St am p ] key. D Select the stamp you require. E Press the [ All Pages ] or [ 1st Pa ge O nly ] key to select the print page.[...]

Stamp 189 2 To change the stamp po sition A Press the [ Change ] key. B Select the desi red po siti on. C Press the [ OK ] key. F After you specified all the desired settings, press the [ OK ] key. Note ❒ To cancel the settings, p ress the [ Can cel ] key. G Press the [ OK ] key. H Set your origin als, then press the { Start } key. Pro g ram/ D e[...]

Co pyin g 190 2 C Press the [ Copy/Document Ser ver Features ] key. D Press the [ Stam p Se tting ] key. E Press the [ User St am p ] key. F Press the [ Program/D elete Stamp ] key.[...]

Stamp 191 2 To prog ram the User Stamp A Press the [ Program ] key. B Press the stamp number (1 – 4) you want to program. Note ❒ Stamp numbers with m already have s ettings in them. ❒ If the stamp number is a lready being used, t he machine will ask you if you wi sh to overwrite it — Press the [ Yes ] or [ No ] key. C Enter the user stamp n[...]

Co pyin g 192 2 E Enter the horizontal size of the stamp with the number keys, then press the [ # ] key. Note ❒ To change the value entered, press the [ Clear ] or { Clear /Stop } key and en- ter the new val ue. ❒ You can en ter sizes within 10 – 432mm, 1.0" – 17.0" horizontal, and 10 – 297mm, 1.0" – 11.7" vertical. [...]

Stamp 193 2 To dele te the User St am p Important ❒ You cannot restore a deleted stamp. A Press the [ Delet e ] key. B Press the stamp number (1 – 4) you want to delete. Note ❒ Only programs with m contain a user stamp . C Press the [ Delet e ] key. Note ❒ To cancel the deletion, p ress the [ Stop ] key. D Press the [ Exi t ] key. E Press t[...]

Co pyin g 194 2 Date Stamp Limita tion ❒ You ca nnot use th e bypass tray wi th this func tion. Note ❒ You can select the followin g styles: • MM/DD/YYYY • MM.DD.YYYY • DD/MM/YYYY •D D . M M . Y Y Y Y • YYYY.MM.DD • DD.JUN. YYYY ❒ You can change the Date Stamp settings with th e U ser Tools. See ⇒ P.325 “Date Stamp” . ❒ Th[...]

Stamp 195 2 ❒ The relationshi p between the direction in which you set the original and the stamp position is as follows: ❒ You can change the stamp position to top, bottom, left and right each way in 1mm, 0.1" steps. See “Position Priority” in ⇒ P.325 “Date S tamp” . ❒ If you com bine this fun ction with the C ombine, M agazin[...]

Co pyin g 196 2 A Press the [ Edit/Stamp ] key. B Press the [ Stam p ] key. C Press the [ Dat e St amp ] key. D Press the [ All Pages ] or [ 1st Pa ge O nly ] to select the print page. To change the style of d a te A Press the [ Change styl e ] key.[...]

Stamp 197 2 B Select the style of date. C Press the [ OK ] key. To change the stamp po sition A Press the [ Change ] key. B Select t he desir ed posit ion o f the Dat e Stamp. C Press the [ OK ] key. E After you specified all the desired settings, press the [ OK ] key. Note ❒ To cancel the settings, p ress the [ Can cel ] key.[...]

Co pyin g 198 2 F Press the [ OK ] key. G Set your origin als, then press the { Start } key. Page Nu mbering Use this function to print page numbers on your copies. There are six ty pes of Page Numbering (n is the total number of pages in your origin al): • Type A: P1,P2,…Pn • Type B: 1/n,2/n,...n/n • Type C: -1-,-2-,...-n- • Type D: P.1,[...]

Stamp 199 2 ❒ The relationshi p between the direction in which you set the original and the Page Numbering orientation/posi tion is as follows: ❒ You can change the stamp position to top, bottom, left and right each way in 1mm, 0.1" steps. See “Position Priority” in ⇒ P.326 “Pa ge Numb erin g” . ❒ If you combine this function w[...]

Co pyin g 200 2 ❖ Page Numbering per original • Combined wi th 1 Sided/2 Si ded in the Combine func tion • Com bined with t he Mag azine or Bookle t functi on ❖ Page Numbering per copy • Combined wi th 1 Sided/2 Si ded in the Combine func tion ❒ See “Page Numbering In Combine Mode” in ⇒ P.326 “Page Nu mberi ng” . ❒ If you us[...]

Stamp 201 2 B Press the [ Stam p ] key. C Press the [ Page Numbering ] key. D Select the style. E To change the stamp position, press the [ Change ] key. If you d o not wish to change the st amp positi on, go t o step G . F Select the stamp position, then press the [ OK ] key. G To change the firs t printing page and start number , press the [ Chan[...]

Co pyin g 202 2 Note ❒ The display differs depending o n the se lected style. ❒ If you do not wis h to chang e, press the [ OK ] key a nd set your origina ls, then press the { Star t } key. H Specify the page an d number . If you selecte d (P1,P2…, -1-,-2-…, P.1 , P.2…, 1, 2 …, ) A Press the [ First Printing Page ] key, then enter the o[...]

Stamp 203 2 E Press the [ Last Numb er ] key, then enter the page number at which to stop numbering with the numb er keys. Note ❒ If you wish to print o nto the l ast page, pr ess the [ To The End ] key and go to step J . F Press the { # } key. If you selecte d (1/5,2/5…) A Press the [ First Printing Page ] key, then enter the original sheet nu[...]

Co pyin g 204 2 E Press the [ Last Numb er ] key, then enter the page number at which to stop numbering with the numb er keys. Note ❒ If you wish to print onto th e last page, pre ss [ To The End ] key a nd go t o step J . F Press the { # } key. G Press the [ Total Pages ] key, then enter the total number of orig inal pages with the number ke ys.[...]

Stamp 205 2 C Press the [ Chapter Number From ] key, then enter the chapter number from which to start numbering with the number keys. D Press the { # } key. E Press t he [ Start Numberi ng From ] key, then enter the page number from which to start numbering with the number keys. F Press the { # } key. I Press the [ OK ] key. Note ❒ To change the[...]

Co pyin g 206 2 Combination Chart The combination chart given below shows whic h modes can be used together. When you read the chart, see the following table: The following shows the combinations of function s. ❍ means that these modes c an be used togeth er. → means that t hese modes cannot be used tog ether. The mode after you select will be [...]

Combination Chart 207 2 Mode be fore you select Book Book → 1 Sided ❍❍❍❍❍❍❍❍❍❍❍❍❍❍❍ →→ -- →→→→→× ❍❍❍❍❍❍❍❍❍❍❍❍ 2 Sid ed → 1 Sided ❍❍❍❍❍❍❍❍❍❍❍❍❍❍❍ →→→ -- →→→→× ❍❍❍❍❍❍❍❍❍❍❍❍ 1 Sid ed → 2 Sided ❍❍❍❍❍?[...]

Co pyin g 208 2[...]