Sanyo PLC-XC56 Bedienungsanleitung

Multimedia Projector MODEL PLC-XC56 Owner ’ s Manual Network Supported Refer to the Owner's Manuals below for details about network function.   Network Set-up and Operation   PJ Network Manager[...]

2 Features and Design This Multimedia Projector is designed with the most advanced technology for portability , durability , and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology . ♦ Compatibility The projector widely accepts various video and c[...]

3 T able of Contents T rademarks Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. Features and Design . . . . . . . . . . . . . . . . . . .2 T able of Contents . . . . . . . . . . . . . . . . . . . . . . 3 T o t h e O w n e r .......................... 4 Safety Instruc[...]

4 T o the Owner CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE EXCEPT LAMP REPLACEMENT . REFER SERVICING T O QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICA TES THA T DANGEROUS VOL T AGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT . THIS SYMBOL INDICA TES THA T T[...]

5 Safety Instructions All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions m[...]

6 Safety Instructions Openings in the cabinet are provided for ventilation. T o ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector , the following precautions should be taken. – Do not[...]

7 Compliance Federal Communications Commission Notice Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and [...]

8 Part Names and Functions ① ⑤ ⑥ ③ ② Front Back ④ ① Air Intake V ent ② Power Cord Connector ③ Infrared Remote Receiver ④ Focus Ring (front) ⑤ Lens and Lens cover ⑥ Zoom Ring (rear) ⑦ Slide Shutter ⑧ Exhaust V ent CAUTION Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side. ⑨ Lam[...]

9 Part Names and Functions ② ③ ① ④ ⑥ ⑩ ⑦ ⑨ ⑧ ⑤ ⑩ S-VIDEO IN Connect the S-VIDEO output signal from video equipment to this jack (p.15). ⑧ AUDIO IN Connect the audio output signal from video equipment connected to ⑨ or ⑩ to this jack. For a mono audio signal (a single audio jack), connect it to the L (MONO) jack (p.15). ?[...]

10 Part Names and Functions ⑤ POINT ▲▼ buttons – Select an item or adjust the value in the On-Screen Menu. (p.21) – Pan the image in Digital zoom + mode. (p.36) ③ W ARNING TEMP . indicator – Lights red when the projector detects an abnormal condition. – Blinks red when the internal temperature of the projector exceeds the operating [...]

1 1 Part Names and Functions  Note: T o ensure safe operation, please observe the following precautions: – Do not bend, drop, or expose the remote control to moisture or heat. – For cleaning, use a soft dry cloth. Do not apply benzene, thinner , spray , or any chemical material. ⑦ ⑭ ⑩ ⑳ ④ ⑱ ② ⑧ ⑨ ⑬ ⑯ ⑤ ⑥ ⑪ ⑫ ⑲[...]

12 Part Names and Functions T o ensure safe operation, please observe the following precautions :  Use two (2) AAA or LR03 type alkaline batteries.  Always replace batteries in sets.  Do not use a new battery with a used battery .  A void contact with water or liquid.  Do not expose the remote control to moisture or heat.  Do not [...]

13 For projector positioning, see the figures below . The projector should be set perpendicularly to the plane of the screen. Installation  Note: • The brightness in the room has a great influence on picture quality . It is recommended to limit ambient lighting in order to obtain the best image. • All measurements are approximate and may var[...]

14 Installation Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. Cables used for connection • VGA Cable (Mini D-sub 15 pin) * • DVI-VGA Cable • DVI Cable • Audio Cables (*One cable is supplied; other cables are not supplied with the projector .)  Note: • Input sound to the[...]

15 Installation Cables used for connection • Video and Audio Cable (RCA x 3) • S-Video Cable • Audio Cable (Cables are not supplied with the projector . ) Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.  Note: When the AUDIO OUT is plugged-in, the projector's built- in s[...]

16 Installation  Note: • When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. • See page 77 for ordering optional cables. Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. Cables used for connection • Audio Cables • Scart-VGA Cable • VGA[...]

17 Installation This projector uses nominal input voltages of 100-120 V or 200–240 V AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor . T o reduce the risk of electrical shock, do not plug into any other type of power system. If you are not sure o[...]

18 The preparation display will disappear after 30 seconds. (See page 52 for Lamp control status.) Connect the projector ’s AC power cord into an AC outlet. The POWER indicator lights red. Press the ON/ST AND-BY button on the top control or on the remote control. The POWER indicator lights green and the cooling fans start to operate. The preparat[...]

19 What is PIN code? PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector . Setting a PIN code prevents unauthorized use of the projector . A PIN code consists of a four-digit number . Refer to the PIN code lock function in the Setting Menu on pages 54-55 for locking operation of [...]

20 TO MAINT AIN THE LIFE OF THE LAMP , ONCE YOU TURN THE PROJECTOR ON, W AIT A T LEAST FIVE MINUTES BEFORE TURNING IT OFF . Power off? disappears after 4 seconds. Press the ON/ST AND-BY button on the top control or on the remote control, and Power off? appears on the screen. Press the O N/ST AND-B Y button again to turn off the projector . The POWE[...]

21 Basic Operation The projector can be adjusted or set via the On-Screen Menu. The menus have a hierarchical structure, with a main menu that is divided into submenus, which are further divided into other submenus. For each adjustment and setting procedure, refer to respective sections in this manual. Use the Point  buttons to highlight or s[...]

22 For detailed functions of each menu, see “Menu T ree” on pages 70-71. Basic Operation ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ Main Menu Sub-Menu ⑨ ⑩ ③ Image select For computer source, used to select an image mode from among Dynamic , Standard , Real , Blackboard(Green) , Colorboard and Image 1 - 4 (p.33). For Video source, used to select an i[...]

23 Basic Operation Open the slide shutter . Rotate the Zoom Ring to zoom in and out. Rotate the Focus Ring to adjust the projected picture focus. Close the slide shutter . If a projected picture still has keystone distortion after pressing the AUTO SETUP button on the top control or the AUTO SET button on the remote control, correct the image manua[...]

24 1 2 Press the MENU button to display the On-Screen Menu. Use the Point  buttons to select Sound . Press the Point  or the SELECT button to access the submenu items. Press the VOLUME+/– buttons on the top control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds. Press the MUTE[...]

25 Basic Operation Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. Press the COMPUTER 1/2, VIDEO, S-VIDEO and COMPONENT buttons on the remote control to select the input source. See pages 27-28,37-38 f[...]

26 Basic Operation black out  normal  black out  normal • • • • • Press the NO SHOW button on the remote control to black out the image. T o restore to normal, press the NO SHOW button again or press any other button. The screen changes each time you press the NO SHOW button as follows. Press the P-TIMER button on the remote c[...]

27 Choose either Computer 1(RGB) or Computer 1(Scart) or Computer 2(Analog) by pressing the INPUT button on the top control or press the COMPUTER 1 button or Computer 2 on the remote control. Before using INPUT button, correct input source should be selected through Menu operation as described below . 1 Input Menu 2 3 Computer Input COMPUTER 1 butt[...]

28 Computer Input Choose Computer 2 (PC digital) or Computer 2 (A V HDCP) by pressing the INPUT button on the top control or press the COMPUTER 2 button on the remote control. Before using INPUT button, correct input source should be selected through Menu operation as described below .  Note: • When the Input Search function is set to On1 or O[...]

29 Computer Input PC System Menu PC System Menu This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats [...]

30 Computer Input Auto PC Adjustment function is provided to automatically adjust Fine sync. , T otal dots , Horizontal , V ertical , Clamp , Display area H and Display area V positions to conform to your computer . PC adjust Menu T o store adjustment parameters The adjusted parameters from the Auto PC Adjustment can be stored in the projector . On[...]

31 Computer Input PC adjust Menu Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector . Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas to store those parameters manually adjusted. It allows yo[...]

32 Computer Input T o store the adjusted data, select Store and then press the Point  or the SELECT button. Move the highlight to one of the Modes 1 to 5 in which you want to store, and then press the SELECT button. T o clear the stored data, select Mode free and then press the Point  or the SELECT button. Move the highlight to the Mode that [...]

33 Computer Input Computer Input Image select Menu IMAGE button Remote Control IMAGE button Select the desired image mode among Dynamic , Standard , Real , Blackboard (Green) , Colorboard , Image 1 , Image 2 , Image 3 and Image 4 by pressing the IMAGE button on the remote control. Picture mode with improved halftone for graphics. For the image proj[...]

34 Computer Input Image Adjust Menu Press the MENU button to display the On-Screen Menu. Use the Point  buttons to select Image adjust and then press the Point  or the SELECT button. 1 2 Use the Point  buttons select the desired item and then press the SELECT button to display the adjustment dialog box. Use the Point  buttons t[...]

35 Computer Input This projector has the picture screen resize function, which enables you to customize the image size. Screen Menu Provide the image to fit the screen size. Provide the image in its original size. When the original image size is larger or smaller than the screen size (1024 x 768), the projector enters to the panning mode automatica[...]

36 Computer Input Select Digital zoom + . The On-Screen Menu disappears and D. zoom + appears. Press the SELECT button to expand the image size. Use the Point   buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM  or [...]

37 Choose Video or S-video by pressing the INPUT button on the top control or the VIDEO button or the S-video button on the remote control. 1 2 Input Menu V ideo Input When video input signal is connected to the VIDEO jack, select Video . Video When video input signal is connected to the S- VIDEO jack, select S-video . S-video  Note: When the In[...]

38 V ideo Input Choose Computer 1(Component) or Computer 1(Scart) by pressing the INPUT button on the top control or press the COMPONENT button or the COMPUTER 1 on the remote control. Before using INPUT button, correct input source should be selected through Menu operation as described below . 1 Input Menu 2 Use the Point  buttons to select [...]

39 V ideo Input 1 A V System Menu (Video or S-video) A V System Menu (Component) 2 If the projector cannot reproduce proper video image, select a specific broadcast signal format from among P AL , SECAM , NTSC , NTSC 4.43 , P AL-M , and P AL-N . T h e p r o j e c t o r a u t o m a t i c a l l y d e t e c t s a n i n c o m i n g v i d e o signal, an[...]

40 V ideo Input Image select Menu Select the desired image mode among Dynamic , Standard , Cinema , Blackboard (Green) , Colorboard , Image 1 , Image 2 , Image 3 and Image 4 by pressing the IMAGE button on the remote control. Picture mode adjusted with fine tone. IMAGE button For the image projected on a blackboard. This mode help enhance the image[...]

41 V ideo Input 1 2 Press the Point  button to decrease the contrast; press the Point  button to increase the contrast (from 0 to 63). Press the Point  button to decrease the brightness; press the Point  button to increase the brightness (from 0 to 63). Press the Point  button to lighten red tone; press the Point  button to dee[...]

42 V ideo Input Use the Point   buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15). Press the Point  button to decrease the sharpness of the image; press the Point  button to increase the sharpness of the image (from 0 to 15). An interlaced video signal can be displayed in progressive mode. Select on[...]

43 V ideo Input This projector has the picture screen resize function, which enables you to customize the image size. Screen Menu 1 2 Provide the image at the 4:3 normal video aspect ratio.  Note: • When no signal is detected, Normal is set automatically and the Aspect dialog box disappears. • The adjustable range for Scale H/V and Position [...]

44 The language used in the On-Screen Menu is available in English , German , French , Italian , Spanish , Portuguese , Dutch , Swedish , Finnish , Polish , Hungarian , Romanian , Russian , Chinese , Korean , Japanese , T urkish and Thai . Setting Menu Setting Press the MENU button to display the On-Screen Menu. Press the Point  buttons to se[...]

45 Setting  Note: • Auto Keystone corrects vertical distortion only , not correct horizontal distortion. • The Auto Keystone function cannot work when the Ceiling feature is set On in the Setting menu (p.50). • Perfect correction of the image distortion cannot be ensured with the Auto setup function. If the distortion is not corrected prop[...]

46 This function is used to store or reset the keystone correction when the AC power cord is unplugged. Store .... ... Keep the keystone correction even when the AC power cord is unplugged. Reset ....... Release the keystone correction when the AC power cord is unplugged. T o correct keystone distortion, press the SELECT button. Keystone appears on[...]

47 Setting Logo (Logo and Logo PIN code lock settings) Logo select This function allows you to customize the screen logo with Logo select , capture , Logo PIN code lock and Logo PIN code change functions.  Note: When On is selected in the Logo PIN code lock function, Logo select and Capture functions cannot be selected. This function decides on [...]

48 Capture This function enables you to capture an image being projected to use it for a starting-up display or interval of presentations. Select Capture and press the SELECT button. A confirmation box appears and select Y es to capture the projected image. After capturing the projected image, go to the Logo select function and set it to User . The[...]

49 Setting Enter a Logo PIN code Use the Point  buttons to enter a number . Press the Point  button to fix the number and move the red frame pointer to the next box. The number changes to  . If you fixed an incorrect number , use the Point  button to move the pointer to the number you want to correct, and then enter the correct nu[...]

50 Setting Ceiling Rear When this function is set to O n , the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector . When this function is set to On , the picture will be left/right reversed. This function is used to project the image from rear of the screen. Closed Captio[...]

51 Setting T ime left before Lamp is off. Power management For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period. Select one of the following options: Ready ............... When the lamp has been fully cooled down, the [...]

52 Setting This function allows you to change brightness of the screen. Normal ...... Normal brightness Eco ............ Lower brightness reduces the lamp power consumption and extends the lamp life. Lamp life control Select the lamp operation when the total lighting time of a lamp exceeds the recommended total hours of use. Mode 1 .............. T[...]

53 Setting Y ou can replace the filter with this function. Press the SELECT button at Filter control to display a confirmation box. T o replace, press the SELECT button at “YES” and the electrically operated filter starts to scroll. Filter control  Note: • Filter replacement icon and “Please wait . . . ” message appear on the screen wh[...]

54 Setting Key lock Security (Key lock and PIN code lock) This function locks the top control and remote control buttons to prevent operation by unauthorized persons. Select Key lock and then press the SELECT button, ?[...]

55 Setting Use the Point  buttons to select Off 、 On1 or On2 , and then press the SELECT button to make a choice. Enter a PIN code Use the Point  buttons to enter a number . Press the Point  button to fix the number and move the red frame pointer to the next box. The number changes to  . If you fixed an incorrect number , use th[...]

56 This function provides the following options in the cooling fans’ operation when the projector is turned off (p.20). L1 ...... Normal operation L2 ...... Slower and lower-sound than the normal operation ( L1 ), but it takes more time to cool the projector down. Setting Fig.1 Filter replacement icon Filter counter Press the SELECT button to sel[...]

57 Setting This function returns all setting values except for the User logo , PIN code lock , Logo PIN code lock , Lamp counter and Filter counter to the factory default settings. Factory default This function records anomalous operations while the projector is in operation and use it when diagnosing faults. Up to 10 warning logs are displayed wit[...]

58 The Information Menu is used for checking the status of the image signal being projected and the operation of the projector . Information Menu The horizontal frequency of the input signal is displayed in KHz , or - - - - - when no signal. The vertical frequency of the input signal is displayed in Hz , or - - - - - when no signal. Numbers of Hz d[...]

59 The W ARNING TEMP . indicator shows the state of the function which protects the projector . Check the state of the W ARNING TEMP . indicator and the POWER indicator to take proper maintenance. The projector is shut down and the W ARNING TEMP . indicator is blinking red. When the temperature inside the projector reaches a certain level, the proj[...]

60 Maintenance and Cleaning Filter prevents dust from accumulating on the optical elements inside the projector . Should the filter becomes clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector . This projector has an electrically operated fil[...]

61 Maintenance and Cleaning T urn off the projector , and unplug the AC power cord from the AC outlet. First, clean up the dust on the projector and around the air vents. 1 2 Loosen 2 screws of the filter cover with a screwdriver and open the filter cover . 3 Rotate the handle of the filter and pull out the filter cartridge. 4 CAUTION Make sure the[...]

62 Maintenance and Cleaning Be sure to reset the Filter counter after replacing the filter cartridge. Press the MENU button to display the On-Screen Menu. Use the Point  buttons to select the Setting and then press the Point  or SELECT buttons. Use the Point  buttons select Filter counter and then press the Point  or SELECT button[...]

63 Maintenance and Cleaning Unplug the AC power cord before cleaning. Gently wipe the lens cover with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner , or use a lens cleaning paper or commercially available air blower to clean the lens cover . Avoid using an excessive amount of cleaner . Abrasive cleaners, solvents[...]

64 Maintenance and Cleaning When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP REPLACE indicator lights yellow . Replace the lamp with a new one promptly . The timing when the LAMP REPLACE indicator should light is depending on the lamp mode. Follow these steps to replace the [...]

65 Maintenance and Cleaning This projector uses a high-pressure lamp which must be handled carefully and properly . Improper handling may result in accidents, injury , or create a fire hazard.             ?[...]

66 Problem: – Solutions No power – Plug the power cord of the projector into the AC outlet. – See if the POWER indicator lights red. – W ait until the POWER indicator stops blinking to turn on the projector again. The projector can be turned on after the POWER indicator turns red. See page 18. – Check the W ARNING TEMP . indicator . If th[...]

67 Appendix No image – Check the connection between your computer or video equipment and the projector . See pages 14-16. – See if the input signal is correctly output from your computer . Some laptop computers may need to change the setting for monitor output when connecting to a projector . See your computer ’s instruction manual for the se[...]

68 Appendix The image is distorted or runs off. – Check PC adjust menu or Screen menu and adjust them. See pages 31-32, 35-36. PIN code dialog box appears – PIN code lock is being set. Enter a PIN code (the “1234” or numbers at start-up. you have set). See pages 19, 54-55. The Remote Control does – Check the batteries. not work. – Make [...]

69 W ARNING : High voltages are used to operate this projector . Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center . Specify the model number and explain about the problem. We will advise you how to obtain service. This[...]

70 Appendix SVGA 1 Mode 1 Mode 2 - - - - T otal dots Horizontal V ertical Display area H Display area V Reset Dynamic Real Blackboard (Green) Image 1 Image 2 Image 3 Image Adjust Contrast Brightness Color temp. Red Gamma Store Normal T rue Digital zoom – Full 0–63 0–63 PC adjust Mode 1 Mode 2 Mode 3 Mode 4 Mode 5 Image select 0–63 0–15 Im[...]

71 Appendix Auto P AL SECAM NTSC NTSC 4.43 P AL-M P AL-N Auto 1080i 1035i 720p 575p 480p 575i 480i Dynamic Cinema Blackboard (Green) Image 1 Image 2 Image 3 Normal 0–63 0–63 Off Image select System (2) System (3) Image Adjust Contrast Brightness Color T int Red Green Blue Sharpness Reset Store Gamma Progressive 0–63 0–63 0–63 0–15 0–1[...]

72 Check the indicators for projector condition. The projector is operating normally . The projector is off. (The AC power cord is unplugged.) The projector is in stand-by mode. Press the POWER ON/ST AND-BY button to turn on the projector . Projector Condition POWER red/green Indicators LAMP REPLACE yellow W ARNING TEMP . red The filter is scrolled[...]

73 Appendix The projector has been cooled down enough and the temperature returns to normal. When turning on the projector , the W ARNING TEMP . indicator stops blinking. Check and replace the filter . Projector Condition POWER red/green Indicators LAMP REPLACE yellow W ARNING TEMP . red W ARNING FIL TER orange   Any  The lamp has been use[...]

74 Appendix Basically this projector can accept the signal from all computers with the V -, H-Frequency mentioned below and less than 140 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited. ON-SCREEN DISPLA Y RESOLUTION H-Freq. (KHz) V -Freq. (Hz) VGA 1 640 x 480 31.47 59.88 VGA 2 720 x 400 31.47 70.09 VGA 3 640 x 400 31.47 [...]

75 When the input signal is digital from DVI terminal, refer to the chart below .  Note: The specifications are subject to change without notice. Appendix ON-SCREEN DISPLA Y RESOLUTION H-Freq. (KHz) V -Freq. (Hz) D-VGA 640 x 480 31.47 59.94 D-480p 640 x 480 31.47 59.88 ON-SCREEN DISPLA Y RESOLUTION H-Freq. (KHz) V -Freq. (Hz) D-720p 1280 x 720 3[...]

76 Appendix Mechanical Information Projector T ype Multi-media Projector Dimensions (W x H x D) 16.1" x 3.3" x 10.3" (410 mm x 85 mm x 262.8 mm) (Not including protrusions) Net Weight 9.0 lbs (4.1 kg)          Panel Resolution LCD Panel Sy[...]

77 Appendix Model No. COMPONENT~VGA Cable : POA-CA-COMPVGA SCART~VGA Cable : POA-CA-SCART VGA-Cable (10 m) : KA-MC-DB10 The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. to the sales dealer . Accessories Owner ’s Manual (CD-ROM) Quick Reference Guide & Safety Manual AC Power Cord R[...]

78 Appendix This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. For PJ Link password, see the owner ’s manual of “Network Set-up and Operat[...]

79 Appendix COMPUTER IN 1 /COMPONENT IN /MONITOR OUT (ANALOG) T erminal: Analog RGB (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Red (R/Cr) Input/Output Ground (Horiz.sync.) Green (G/Y) Input/Output ----- Blue (B/Cb) Input/Output Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V Power/----- Horiz. sync. Input/Output (Composit[...]

80 Appendix Write down the PIN code number in the column below and keep it with this manual securely . If you forgot or lost the number and unable to operate the projector , contact the service station. Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* Put the label below (supplied) on in a prominent place of the projector's bo[...]

81 Appendix Unit: mm(inch) Screw Holes for Ceiling Mount Screw: M4 Depth: 12.0(0.472) 8.60(218.5) (50.7) 2.17(55.0) (410.0) 5.91(150.2) 3.04(77.3) 3.52(89.4) 2.17(55.2) 10.35(262.8) 10.50(266.8) 3.35(85.0) 4.04(102.7) 4.38(1 1 1.2) 2.81(71.5) 2.17(55.0) (56.3) (143.0) (230.0) (50.0) (50.8) (102.0) (97.0) (30.0) 1.97 16.14 Dimensions[...]

KL5AC[...]