Samsung 460CX-2 Bedienungsanleitung

ii LCD DISPLAY quick start guide 400CX-2, 400CXN-2, 460CX-2, 460CXN-2[...]

Introduction Package Contents Note Please make sure the following items are included with your LCD Display. If any items are missing, contact your dealer . Contact a local dealer to buy optional items. Checking the Contents of the Package Remove the lock from the package box, as shown in the figure above. Lift up the package box by holding the groo[...]

Manuals Quick Setup Guide Warranty Card (Not available in all loca- tions) User's Guide MagicInfo Software CD, MagicInfo Manual CD (Applicable to the CXN-2 model only) Cables Power Cord Others Remote Control Batteries (AAA X 2) (Not available in all loca- tions) Sold separately DVI Cable LAN Cable (Applicable to the CXN-2 model only) Wall Moun[...]

Sold separately Component to D-sub Cable Semi Stand KIT D-Sub Cable Your LCD Display Front MENU button [MENU] Opens the on-screen menu and exits from the menu. Also use to exit the OSD menu or return to the previous menu. Navigate buttons (Down-Up buttons) / Channel buttons Moves from one menu item to another vertically or adjusts selected menu val[...]

[ PC ] → [ DVI ] → [ AV ] → [Component] → [ HDMI]→ [ MagicInfo ] → [ TV ] Note MagicInfo supports the CXN-2 model only. D.MENU Opens the on-screen D.MENU. Power button [ ] Use this button for turning the LCD Display on and off. Brightness Sensor (Optional) Automatically detects the surrounding brightness it accordingly. This function is[...]

POWER S/W ON [ │ ] / OFF [O] Switches the LCD Display On/Off. POWER The power cord plugs into the LCD Display and the wall outlet. RS232C OUT/IN (RS232C Serial PORT) MDC(Multiple Display Control) Program Port RGB/COMPONENT IN (PC Video Con- nection Terminal) " Use a D-Sub Cable (15 pin D-Sub) - PC mode (Analog PC) " Connect the RGB/COMP[...]

DVI/RGB/HDMI AUDIO IN(PC/DVI/ HDMI(PC) Audio connection terminal(in- put)) AV / COMPONENT AUDIO IN [R- AU- DIO- L] Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the [ R- AUDIO - L] port of the LCD Display. DVI OUT " Connect a monitor to another monitor through a DVI cable. " Connect the DVI OUT port on the mon- itor to the H[...]

COMMON INTERFACE This contains information on CAM inserted in the CI slot and displays it. When not inserting CI CARD in some channels, Scramble Signal is displayed on the screen. You can install the CAM anytime whether the TV is ON or OFF. SERVICE This is a reserved terminal used for serv- icing. ANT IN Connect the CATV cable or TV antenna cable t[...]

Kensington Lock The Kensington Lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufactur- er. Refer to the manual provided with the Kensington Lock for proper use. The lock- ing [...]

POWER OFF Number Buttons DEL / GUIDE button + VOL - SOURCE D.MENU TOOLS Up-Down Left-Right buttons INFO COLOR BUTTONS TTX/MIX MTS/DUAL ENTER/PRE-CH MUTE CH/P TV MENU RETURN EXIT MagicInfo 1. POWER Turns the product On. 2. OFF Turns the product Off. 3. Number Buttons Press to change the channel. 4. DEL / GUIDE but- ton The "-" button is us[...]

8. TOOLS Use to quickly select frequently used functions. 9. Up-Down Left-Right buttons Moves from one menu item to another horizontally, ver- tically or adjusts selected menu values. 10. INFO Current picture information is displayed on the upper left corner of the screen. 11. COLOR BUTTONS Press to add or delete channels and to store channels to t[...]

18. MENU Opens the on-screen menu and exits from the menu or closes the adjustment menu. 19. RETURN Returns to the previous menu. 20. EXIT Exits from the menu screen. 21. MagicInfo MagicInfo Quick Launch Button. Mechanical Layout (400CX-2 ,400CXN-2) Mechanical Layout Installation Wall Mount VESA Bracket " When installing VESA, make sure to com[...]

Dimensions Notice For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length. Wall Bracket Installation " Contact a technician for installing the wall bracket. " SAMSUNG Electronics is not responsible for any damages to the product or persons if you elect to install the unit on your own. " This[...]

1. Insert and tighten the Captive Screw in the direction of the arrow. When done, mount the wall bracket on the wall. There are two hinges(left and right). Use the correct one. A - Captive Screw B - Wall Bracket C - Hinge (Left) D - Hinge (Right) 2. Before drilling into the wall, check if the length between the two locking holes at the back of the [...]

To mount the product on the wall bracket The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same) 1. Remove the 4 screws on the back of the product. 2. Insert screw B into the plastic hanger. Notice " Mount the product on the wall bracket and make sure it is properly fixed to t[...]

4. Remove safety pin (3) and insert the 4 product holders into the corresponding bracket holes (1). Then place the product(2) so that it is firmly fixed to the bracket. Make sure to re-insert and tighten the safety pin (3) to securely hold the product to the bracket. A - LCD Display B - Wall Bracket C - Wall Wall Bracket Angle Adjustment Adjust the[...]

Make sure to use the top center, and not the left or the right side of the product to adjust the angle. Mechanical Layout (460CX-2 ,460CXN-2) Mechanical Layout Installation VESA Bracket " When installing VESA, make sure to comply with the international VESA standards. " Purchasing VESA Bracket and Installation Information : Please contact[...]

Dimensions Notice For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length. Wall Bracket Installation " Contact a technician for installing the wall bracket. " SAMSUNG Electronics is not responsible for any damage to the product or persons if you elect to install the unit on your own. " This [...]

When done, mount the wall bracket on the wall. There are two hinges(left and right). Use the correct one. A - Captive Screw B - Wall Bracket C - Hinge (Left) D - Hinge (Right) 2. Before drilling into the wall, check if the length between the two locking holes at the back of the product is correct. If the length is too short or long, loosen all or s[...]

To mount the product on the wall bracket The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same) 1. Remove the 4 screws on the back of the product. 2. Insert the screw B into the plastic hanger. Notice " Mount the product on the wall bracket and make sure it is properly fixed [...]

4. Remove safety pin (3) and insert the 4 product holders into the corresponding bracket holes (1). Then place the product(2) so that it is firmly fixed to the bracket. Make sure to re-insert and tighten the safety pin (3) to securely hold the product to the bracket. A - LCD Display B - Wall Bracket C - Wall Wall Bracket Angle Adjustment Adjust the[...]

Make sure to use the top center, and not the left or the right side of the product to adjust the angle. Introduction 29[...]

Connections Connecting a Computer Note AV input devices such as DVD players, VCRs or camcorders as well as your computer can be connected to the LCD Display. For detailed information on connecting AV input devices, refer to the contents under Adjusting Your LCD Display. Connect the power cord for your LCD Display to the power port on the back of th[...]

Using the HDMI (digital) output on the graphics card. " Connect the HDMI IN port on the monitor to the HDMI port on the PC using the HDMI cable. Note " When the HDMI cable to the PC, ensure that you select HDMI from both the Source List and Edit Name before selecting PC or DVI de- vice so that normal PC screen and sound can be outputted. [...]

1. Connect the CATV cable or TV antenna cable to the "ANT IN" port on the rear side of the LCD Display. Using a TV antenna cable (sold separately). " When using an interior antenna terminal: Check the antenna terminal on the wall first and connect the antenna cable. " When using an outdoor antenna: If you are using an outdoor an[...]

2. Insert the CAM with the CI CARD installed into the common interface slot. (Insert the CAM in the direction of the arrow, right up to the end so that it is parallel with the slot.) 3. Check if you can see a picture on a scrambled signal channel. Connecting AV Devices 1. Connect the Video and [R-AUDIO-L] port of the DVD, VCR or DTV Set-Top Box to [...]

" For an explanation of Component video, consult your DVD or external device's user manual. Connecting to a Camcorder 1. Locate the AV output jacks on the camcorder. They are usually found on the side or back of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the AV/COMPONENT AUDIO IN [R-AU[...]

Connecting Using a DVI to HDMI Cable 1. Connect the DVI output terminal of a digital output device to the HDMI IN terminal of the LCD Display using a DVI to HDMI cable. 2. Connect the red and white jacks of an RCA to stereo (for PC) cable to the same colored audio output terminals of the digital output device, and connect the op- posite jack to the[...]

Connecting a DTV Set Top (Cable/Satellite) Box 1. Connect the Component to D-sub cable(sold separately) to the product's RGB/ COMPONENT IN port and the COMPONENT - PR, Y, PB ports on the Set-Top Box. 2. Connect a set of audio cables between the AV/COMPONENT AUDIO IN [R-AUDIO- L] on the LCD Display and the AUDIO OUT jacks on the Set Top Box. No[...]

Note Connect the LAN cable. (Applicable to the CXN-2 model only) Connecting a USB device " You can connect USB devices such as a mouse or keyboard. (Applicable to the CXN-2 model only) Connections 37[...]

Troubleshooting Self-Test Feature Check Note Check the following items yourself before calling for assistance. Contact a Service Center for problems that you cannot solve by yourself. Self-Test Feature Check 1. Turn off both your computer and the LCD Display. 2. Unplug the video cable from the back of the computer. 3. Turn on the LCD Display. The f[...]

" Do not use benzene, thinner or other flammable substances, or a wet cloth. " We recommend that a SAMSUNG cleansing agent is used to prevent damage to the screen. 2) Maintaining the Flat Panel Display Screen. Clean with a soft cloth (cotton flannel) smoothly. " Never use acetone, benzene or thinner. (They may cause flaws or deformat[...]

PC Mode Q: The LCD Display screen flickers. A: Check if the signal cable between the computer and the LCD Display is securely connected. (Refer to Connecting a Computer ) TV Mode Q: TV screen is blurred or shows noise signals. A: Check if the TV antenna connector is securely connected to the external antenna. (Refer to Connecting TV ) Problems rela[...]

Q: Ghost images are shown in the picture. A: Check if the resolution and frequency set for the computer video card falls in the range supported by the LCD Display. If not, reset them referring to the current Information under the LCD Display menu and Preset Timing Modes. Q: The image is too light or too dark. A: Adjust the brightness and contrast .[...]

Q: The sound is too high or too low. A: Adjusts the Treble and Bass to the appropriate levels. Problems related to the Remote Control Note Problems related to the remote control and their solutions are listed. Q: The remote control buttons do not respond. A: Check the polarities (+/-) of the batteries. A: Check if the batteries are empty. A: Check [...]

Q: How can I clean the outer case/LCD Panel? A: Disconnect the power cord and then clean the LCD Display with a soft cloth, using either a cleaning solution or plain water. Do not leave any detergent or scratches on the case. Do not let any water enter the LCD Display. Q: How can I play the video? A: The video supports the MPEG1 and WMV codecs only[...]