Q-Logic 8100 SERIES Bedienungsanleitung

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348

Zur Seite of

Richtige Gebrauchsanleitung

Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung Q-Logic 8100 SERIES an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von Q-Logic 8100 SERIES, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.

Was ist eine Gebrauchsanleitung?

Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung Q-Logic 8100 SERIES die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.

Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung Q-Logic 8100 SERIES. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.

Was sollte also eine ideale Gebrauchsanleitung beinhalten?

Die Gebrauchsanleitung Q-Logic 8100 SERIES sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts Q-Logic 8100 SERIES
- Den Namen des Produzenten und das Produktionsjahr des Geräts Q-Logic 8100 SERIES
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts Q-Logic 8100 SERIES
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen

Warum lesen wir keine Gebrauchsanleitungen?

Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von Q-Logic 8100 SERIES zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von Q-Logic 8100 SERIES und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service Q-Logic finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von Q-Logic 8100 SERIES zu überspringen, wie es bei der Papierform passiert.

Warum sollte man Gebrauchsanleitungen lesen?

In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts Q-Logic 8100 SERIES, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.

Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von Q-Logic 8100 SERIES widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.

Inhaltsverzeichnis der Gebrauchsanleitungen

  • Seite 1

    FE0254601-00 A User ’ s Guide Converged Network Adapter 8100 Series[...]

  • Seite 2

    ii FE0254601- 00 A User ’s Gu ide Converged Network Adapter 8100 Series Information fu rnished in this manual is believed to be accurate and reliable. However , QLogic Corporation assumes no responsibility for its use, nor for any infringements of patent s or other right s of third part ies which may result from it s use. QLogic Corporation reser[...]

  • Seite 3

    FE0254601-00 A iii T able of Content s Preface What’s in This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xix Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xx Related Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

  • Seite 4

    iv FE0254601-00 A User ’s Gu ide Converged Network Adapter 8100 Series Adap ters FCoE Network Deployment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 Hardware Component s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5 Boot Code . . . . . . . . . . . . . . . . . . . . . . . . . [...]

  • Seite 5

    FE0254601-00 A v User ’ s Guide Converged Ne twork Adapter 8100 Series Adap ters Removing the Driver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-30 V erifying Driver Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-31 Firmware Upgrades . . . . . . . . . . . . . .[...]

  • Seite 6

    vi FE0254601-00 A User ’s Gu ide Converged Network Adapter 8100 Series Adap ters Upgrading the Boot Code (Firmware) . . . . . . . . . . . . . . . . . . . . . . . . . 4-24 Upgrading the Boot Code Using the QConvergeConsole GUI . . 4-24 Using QLogic BIOS and UEFI Utilities . . . . . . . . . . . . . . . . . . . . 4-26 Management T ool Installation. [...]

  • Seite 7

    FE0254601-00 A vii User ’ s Guide Converged Ne twork Adapter 8100 Series Adap ters PXE Boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-25 Prerequisites for PXE Boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-25 PXE Protocol Operation . . . . . . . . . . . . . . . . . . . . . . [...]

  • Seite 8

    viii FE0254601-00 A User ’s Gu ide Converged Network Adapter 8100 Series Adap ters 7 Configuring FCoE in a Windows Environment Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 Driver Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

  • Seite 9

    FE0254601-00 A ix User ’ s Guide Converged Ne twork Adapter 8100 Series Adap ters Online S torage Configuration and Reconfiguration . . . . . . . . . . . . . . . . . . . 8-21 Adapter FCoE Performance T uning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-22 Operation Mode (ZIO) . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

  • Seite 10

    x FE0254601-00 A User ’s Gu ide Converged Network Adapter 8100 Series Adap ters 9 Offline Utilities Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1 Fast!UTIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2 S tarting Fast! U[...]

  • Seite 11

    FE0254601-00 A xi User ’ s Guide Converged Ne twork Adapter 8100 Series Adap ters List of Figures Figure Page i Illustration of Sample Motherboard and Slo ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxviii 1-1 Encap sulated Fibre Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 1-2 C[...]

  • Seite 12

    xii FE0254601-00 A User ’s Gu ide Converged Network Adapter 8100 Series Adap ters 3-36 Inst all Additional Drivers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-27 3-37 Windows Inst allation T ype . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-28 3-38 Window[...]

  • Seite 13

    FE0254601-00 A xiii User ’ s Guide Converged Ne twork Adapter 8100 Series Adap ters 4-20 Install the QConvergeConsole: Directory Containing Inst aller . . . . . . . . . . . . . . . . . 4-28 4-21 Install the QConvergeConsole: T erminal Window—V erify Permission to Execute . 4-28 4-22 Inst all the QConvergeConsole: Run in T erminal Selection . . [...]

  • Seite 14

    xiv FE0254601-00 A User ’s Gu ide Converged Network Adapter 8100 Series Adap ters 5-33 Add Hardware — Select Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-26 5-34 Add Hardware — Network Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-26 5-35 Add Hardware — Ready to[...]

  • Seite 15

    FE0254601-00 A xv User ’ s Guide Converged Ne twork Adapter 8100 Series Adap ters 6-33 Examine the Bo nd0 Network Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-50 6-34 ifconfig Command Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-51 6-35 V erifying that the VLA[...]

  • Seite 16

    xvi FE0254601-00 A User ’s Gu ide Converged Network Adapter 8100 Series Adap ters 9-5 Select able Boot Setting Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-6 9-6 Select Fibre Cha nnel Device Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-7 9-7 Advanced Adapte r Settings Win[...]

  • Seite 17

    FE0254601-00 A xvii User ’ s Guide Converged Ne twork Adapter 8100 Series Adap ters 8-19 FC HBA Change LUN S tate Utility Package Files . . . . . . . . . . . . . . . . . . . . . . . . . . 8-50 8-20 FC HBA Change LUN S tate Utility Command Line Options . . . . . . . . . . . . . . . . . . 8-51 8-21 HBA Change LUN S tate Utility Command Examples . .[...]

  • Seite 18

    xviii FE0254601-00 A User ’s Gu ide Converged Network Adapter 8100 Series Adap ters[...]

  • Seite 19

    FE0254601-00 A xix Preface This guide provides det ailed instructions on the inst allation, configuration, and troubleshooting of QLogic 8100 Se ries Converged Network Adapter for Windows ® , Linux ® , and VMware ® . It also provides det ails on the use of QLogic adapter features to enhance the value of serve r virtualization using VMware ESX™[...]

  • Seite 20

    Preface Intended Audience xx FE0254601-00 A  Section 7 describes the characteristics, co nfigurations, and feat ures of the QLogic 8100 Series Converged Netwo rk Adapter FCoE function for Windows.  Section 8 describes the characteristics, co nfigurations, and feat ures of the QLogic 8100 Series Converged Netwo rk Adapter FCoE function for L i[...]

  • Seite 21

    Preface License Agreeme nts FE0254601-00 A xxi  Te x t i n blue font indicates a hyperlink (jump) to a figure, table, or section in this guide, and links to W eb sites are shown in underlined blue . For example:  T able 9-2 lists problems related to the user int erface and remote agent.  See “Installatio n Checklist” on page 3-6 .  [...]

  • Seite 22

    Preface T echnical Support xxii FE0254601-00 A T echnical Support Customers should cont act their authorized maintenance provider for technical support of their QLogic product s. QLogic- direct customers may contact QLogic T echnical Support; others will be redirected to their authorized mainte nance provider . Visit the QLogic support W eb site li[...]

  • Seite 23

    Preface Legal Notices FE0254601-00 A xxiii Knowledge Dat abase The QLogic knowledge dat abase is an ext ensive collection of QLogic product information that you can search for specific solutions. W e are constantly adding to the collection of information in our database to pro vide answers to your most urgent questions. Access the databa se from th[...]

  • Seite 24

    Preface Legal Notices xxiv FE0254601-00 A EMI and EMC Requirement s FCC Part 15 compliance: Class A (QLE8 xxx ) FCC compliance information st atement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must a ccept any inte[...]

  • Seite 25

    Preface Legal Notices FE0254601-00 A xxv MIC: Class A (QLE81 xx ) Korea MIC Class Korean KCC : KN22 KN24(08.05.19) Class A (QLE81 xx) Korea Class A Certified Product Name/Model Fibre Channel Adapter Certification holde r—QLogic Corporation Manufactured date—Refer to date code listed o n product Manufacturer/Country of origin QLogic Corporation [...]

  • Seite 26

    Preface Legal Notices xxvi FE0254601-00 A[...]

  • Seite 27

    FE0254601-00 A xxvii Quick S t art Inst allation Instructions This Quick S tart section descr ibes how to install and conf igure your new QLogic Converged Network Adapter in four simple step s:  S tep 1. V erify the Package Contents .  S tep 2. Inst all the Adapter Hardwa re .  S tep 3. Install the Adapter Drivers .  S tep 4. Install QC[...]

  • Seite 28

    Quick S tart S tep 3. Install t he Adapter Drivers xxviii FE0254601-00 A 4. Pull out the slot cover (if any) by removing the screw or releasing the lever . 5. Inst all the low-profile bracket (if required). 6. Grasp the adapter by the top edge and seat it firmly in to the appropriate slot (see the illustration below). 7. Refasten t he adapter ’s [...]

  • Seite 29

    Quick S tart S tep 4. Install QConvergeConsole Management T ools FE0254601-00 A xxix 4. On the download page un der Drivers , select the appropriate driver and download it to your system. 5. Follow the instructions provided in the driver read me file for installing the downloaded driver . S tep 4. Inst all QConvergeConsole Management To o l s T o i[...]

  • Seite 30

    Quick S tart Additional Resour ces xxx FE0254601-00 A[...]

  • Seite 31

    FE0254601-00 A 1-1 1 Product Overview  What is a Converged Network Adap ter?  What is Enhanced Ethernet?  What is Fibre Channel over Ethernet (FCoE)?  QLogic Converged Network Adapter  Hardware Component s  Software Component s  Adapter S pecifications What is a Converge d Network Adapter? A Converged Network Adapter is a multi[...]

  • Seite 32

    1–Product O verview What is Enhanced Ethernet? 1-2 FE0254601-00 A What is Enhanced Ethernet? S tandard Eth ernet is a best-ef fort network that may drop packets o r deliver packet s out of order when the network is busy or congeste d, resulting in retransmissions and time-out s. The SCSI payload carried by the Fibre Channel protocol does not reac[...]

  • Seite 33

    1–Product Overview QLogic Converged Networ k Adapter FE0254601-00 A 1-3 Because the transmitting Fibre Channel fr ames require a lossless tra nsport, an Ethernet network that transport s FCoE frames must also provide the same lossless characteristics. Priority flow control (PFC) provides these lossless characteristics. PFC is a revised im plement[...]

  • Seite 34

    1–Product O verview FCoE Network Deployment 1-4 FE0254601-00 A T able 1-2 describes the QLogic 8100 series Converged Network Adapters for standard servers. FCoE Network Deployment The FCoE network consist s of several hardware component s in addition to the Converged Network Adapters. FCoE swit ches (converged networking switches) are an importan[...]

  • Seite 35

    1–Product Overview Hardware Components FE0254601-00 A 1-5 In Figure 1-3 , the FCoE adapter communicates to existing native Fibre Chann el storage because of the translatio n capab ility of the switch. Figure 1-3. FCoE Deployment Hardware Component s A typical 8100 Series Adapter has the following major compone nts 1 :  ASIC (reduced instructio[...]

  • Seite 36

    1–Product O verview Hardware Components 1-6 FE0254601-00 A Figure 1-4 shows the hardware component s of a QLogic 8100 Series Adapter . T able 1-3 describes the 8100 Series Adapter component s. Figure 1-4. 8100 Seri es Adapter Components T able 1-3. 8100 Series Adapter Components Hardware Component Function ASIC The Converged Network Controller , [...]

  • Seite 37

    1–Product Overview Hardware Components FE0254601-00 A 1-7 S o ft w a r e C o m p o n e n ts This section describes the following QLogic Converged Network Adapter software components ( Figure 1-5 ):  Boot Code  Operating System Driver  Firmware  Management T ools and Utilities Tr a n s c e i v e r s Each tran sceiver is a removable d e[...]

  • Seite 38

    1–Product O verview Hardware Components 1-8 FE0254601-00 A Figure 1-5. Driver Model Boot Code Boot code resides in the Flash memory on the adapter . The primary function of the boot code is to communicate with an exte rnal boot device before the operatin g system takes control when b ooting from a storage d evice or a pre-eXecution environment (P[...]

  • Seite 39

    1–Product Overview Hardware Components FE0254601-00 A 1-9 Firmware The firmware module performs most of the FCoE and Ethernet pro tocol-related functions, thus freeing the system CPU and memory reso urces from protocol processing. This ef ficiency saves runtim e system resources, such as CPU and memory . For the QLogic 8100 Se ries Adapter , the [...]

  • Seite 40

    1–Product O verview Hardware Components 1-10 FE0254601-00 A T able 1-4. Software and Firmware Components Component (QLogic Operating System Supported a Comment s Windows FCoE Driver Windows NIC Driver Windows T eaming Driver Windows Install the team ing driver only if the teaming function is required. NIC management is provided by Windows Prope r[...]

  • Seite 41

    1–Product Overview Hardware Components FE0254601-00 A 1-1 1 QLogic SuperI n- staller for Li nux Red Hat RHEL Novell SLES Linux Utility that installs:  FC-FCoE and Ethernet Netwo rk- ing drivers.  QConvergeConsole comman d line interface (CLI) Management To o l .  Fibre Channel/FCoE an d Ether- net Networking Managem ent Agents to ena ble[...]

  • Seite 42

    1–Product O verview Adapter S pecifications 1-12 FE0254601-00 A Adapter S pecifications The QLogic 8100 Series Adapters provide high-performance server connectivity to SAN and LAN networks. T able 1-5 lists the adapter physical and electrical specifications. NOTE: Some features may not be available for all 8100 Series Converged Network Adapters. [...]

  • Seite 43

    1–Product Overview Adapter S pecifications FE0254601-00 A 1-13 BIOS Support QLogic adapte rs support the following boot ima ges (boot from SAN and PXE boot):  PCI BIOS version 2.1 and 3.0  UEFI specification 1.10 and 2. x .  FCode for SP ARC ® -based systems T able 1-6. Transceiver Requirements Adapter Active Copper Passive Copper SR Op[...]

  • Seite 44

    1–Product O verview Adapter S pecifications 1-14 FE0254601-00 A N_Port ID Virtualization Supports 256 virtua l ports per physical po rt, optimized for virtualization T opo logy Support Point-to-point and switched fabric Logins Supports 2,048 concurre nt logins and 2, 048 concurre nt exchanges Boot from SA N Supports b ooting the server with an op[...]

  • Seite 45

    1–Product Overview Adapter S pecifications FE0254601-00 A 1-15 Compliance  IEEE: 802.3ae (10Gb Ethernet)  802.1q (VLAN)  802.3ad (Lin k Aggregation)  802.1p (Priority Encod ing)  802.3x (Flow Control)  IEEE 1 149.1 (JT AG)  IPv4 S pecification (RFC 791)  IPv6 S pecification (RFC 2460)  TCP/UDP S pecification (RFC 793/76[...]

  • Seite 46

    1–Product O verview Adapter S pecifications 1-16 FE0254601-00 A T able 1-9. Management Sp ecifications Specification Description QLogic Utilities  QConvergeConsole Web Management GUI, which is used to configure and manag e QLogic Fibre Channel adapters, Intelligent Etherne t Adapters, and Converge d Network Adapters within storage ar ea networ[...]

  • Seite 47

    FE0254601-00 A 2-1 2 Management T ools Overview QLogic provides the followi ng tools with which to manage the QLogic 81 00 Series Converged Network Adapter:  QConvergeConsole W eb Management GUI  QConvergeConsole Managemen t Agents (qlremote/ne tqlremote)  QConvergeConsole CLI  Offline Uti lities QConvergeConsole W eb Management GUI The[...]

  • Seite 48

    2–Management T ools QConvergeConsole Management Agen ts (qlremote /netqlremote) 2-2 FE0254601-00 A  Configuration management – QConverg eConso le allows you to configure local and remote systems. With QConvergeConsole you can configure QLogic adapters and connected devices. It also lets you update a dapter parameters, firmware, boot co de, a[...]

  • Seite 49

    2–Management T ools QConvergeConsole CLI FE0254601-00 A 2-3 QConvergeConsole CLI The QConvergeConsole CLI is a unified CLI tha t manages Ethernet and Fibre Channel functions on QLogic adapters. The QConvergeConsole CL I non-interactive mode st arts, performs the functions defined by the list of parameters provided, and then terminat es. Use the n[...]

  • Seite 50

    2–Management T ools Offline Utilities 2-4 FE0254601-00 A The offline utilities for UEFI servers are as follows:  EFICFG — This utility provides a UEFI shell into the server manufacturer’s boot-up menu interface, which configures advanced adapter features, including boot-from-SAN.  EFIUTIL — This utility installs the mult i-boot image [...]

  • Seite 51

    FE0254601-00 A 3-1 3 Inst allation in a W indows Environment Overview This section describes how to inst all a QLogic Converged Network Adapter , including system requirement s, hardware installation, driver inst allation, and software inst allation. System Requirement s Operating Systems Requirement s The QLogic 8100 Series Adapters su ppor t the [...]

  • Seite 52

    3–Installatio n in a Windows Environment Downloading QLogic Drivers 3-2 FE0254601-00 A  The server motherboard must have a PCIe slot of at least x8 ph ysical length. Both PCIe Gen 1 and Gen 2 slots are supp orted. QLogic 8100 Series Adapters operate on all eight lanes on a PCIe Gen 1 x8 slot, and automatically train down to use o nly four lane[...]

  • Seite 53

    3–Installatio n in a Windows Environment Downloading QLogic Drivers FE0254601-00 A 3-3 4. In the selection list, click Converge d Network Adapters in the first column. 5. In the selection list, click on t he adapter model number in the second column. 6. In the third column, click the versio n of the Microsoft Windows ope rating system that is ins[...]

  • Seite 54

    3–Installatio n in a Windows Environment Installing Hardware 3-4 FE0254601-00 A 8. Under Drivers, click the download link for the QLogic drivers. T o enable all adapter capabilities, d ownload both the FCoE (ST OR Miniport) and NIC (NDIS Miniport) drivers ( Figure 3-2 ). Figure 3-2. Download Drivers for Windows Servers 9. Read the QLogic license [...]

  • Seite 55

    3–Installatio n in a Windows Environment Installing Hardware FE0254601-00 A 3-5 Inst all the Adapter T o install the ada pter: 1. Record the adapter model number , which can be found on the bar cod e label on the board. 2. Determine whether the server requires a f ull-height or a half-he ight adapter bracket. The QLogic 8100 Series Ad apter ships[...]

  • Seite 56

    3–Installatio n in a Windows Environment Installing Hardware 3-6 FE0254601-00 A  For QLE815 x Series Adapters, see the list of app roved copper cables at http://www .qlogic.com/Resources/Pages/Resources.aspx under Cable Support. 10. Connect the other end of the Ethe rnet cable to a supported switch. 1 1. Plug in the power cables and power up t[...]

  • Seite 57

    3–Installatio n in a Windows Environment Installing Sof tware FE0254601-00 A 3-7  If the QLogic BIOS banner does not appear , confirm that the adapter is seated properly . If necessary , inst all the adapter in another available PCIe x8 slot. If the BIOS banner still does no t appear , verify that the adapter is compatible with the server . If[...]

  • Seite 58

    3–Installatio n in a Windows Environment Installing Sof tware 3-8 FE0254601-00 A Creating the Driver Disk or Extr acting the Driver File into a Folder For a boot-from-SAN inst allation, insert the disk, CD, or o ther media, and unzip the driver package file. Enter a temporary d irectory on the corresponding drive. This drive is called the driver [...]

  • Seite 59

    3–Installatio n in a Windows Environment Installing Sof tware FE0254601-00 A 3-9 T o obtain ven dor ID and device ID information: 1. Right-click on th e My Computer icon o n the desktop or in the St ar t menu, and then select Manage . 2. Select Device Manager in the lef t pane. 3. In the right pane, under Other Devices , right click on any device[...]

  • Seite 60

    3–Installatio n in a Windows Environment Installing Sof tware 3-10 FE0254601-00 A 5. In the Property drop-down list, select Device Instance Id (Windows Server 2003) or Hardware Ids (Windows 2008). Figu re 3-6 shows sample vendor IDs and device IDs for QLogic 810 0 NIC adapter (Windows 20 03) and QLogic 8100 FCoE adapter (Windows 2008). Figure 3-6[...]

  • Seite 61

    3–Installatio n in a Windows Environment Installing Sof tware FE0254601-00 A 3-1 1 4. In the Computer Management window , select Device Manager in the left pane. 5. Scroll d own the list of hardware types in the right pane. If you are inst alling the QLogic adapter drivers for the first time on this server , do the following; otherwise, go to St [...]

  • Seite 62

    3–Installatio n in a Windows Environment Installing Sof tware 3-12 FE0254601-00 A Adapter under this section. Figure 3-9 sho ws typical entries for a dual-port QLogic 8100 Series Adapter . Figure 3-9. T ypical QLogic 8100 Seri es Ethernet Adapter Port Entries b. T o update the driver , right click Ethernet Controller , and then click Update Drive[...]

  • Seite 63

    3–Installatio n in a Windows Environment Installing Sof tware FE0254601-00 A 3-13 7. The Hardware Upda te Wizard start s. Select No, not this time , and then click Next ( Figure 3-1 1 ). Figure 3-1 1. S tarting the Hardware Update Wizard 8. Select In stall from a list or specific location (Advanced) , and then click Next . 9. Click Have Disk , an[...]

  • Seite 64

    3–Installatio n in a Windows Environment Installing Sof tware 3-14 FE0254601-00 A 12. Confirm that the QLogic 10Gb network adapter is shown in the list of network adapters ( Figure 3-12 ), and th en click Next . Figure 3-12. Confirming the Ethernet Adap ter 13. The Microsof t Windows Hardware Upd ate Wizard installs the NDIS driver for the QLogic[...]

  • Seite 65

    3–Installatio n in a Windows Environment Installing Sof tware FE0254601-00 A 3-15 Adapter . For information about identifying QLogic devices in the Other Devices section, refer to “Identifying Unnamed Devices” on p age 3-8 . Figure 3-13. QLogic 8100 Seri es Adapter Device Entries b. T o inst all the driver , right click Fibre Channel Contro l[...]

  • Seite 66

    3–Installatio n in a Windows Environment Installing Sof tware 3-16 FE0254601-00 A b. T o upgrade the driver , right click QLogic FCoE Adapter , and then click Up date Driver ( Figure 3-16 ). Figure 3-16. Updating an FCoE Driver 7. The Hardware Upda te Wizard start s. Select No, not this time , and then click Next . 8. Select In stall from a list [...]

  • Seite 67

    3–Installatio n in a Windows Environment Installing Sof tware FE0254601-00 A 3-17 13. The Microsoft Wind ows Hardware Up date Wizard proceeds to install the STOR Miniport driver for t he QLogic adapter FCoE function. 14. When the installation is co mplete, click Finish to close the Hardware Update Wizard. Inst alling the NIC Driver for Windows Se[...]

  • Seite 68

    3–Installatio n in a Windows Environment Installing Sof tware 3-18 FE0254601-00 A b. T o inst all the driver , right click Ethernet Controller , and then click Update Driver Software ( Figure 3-19 ). Figure 3-19. Installing an NIC Driver — Windows 2008 6. If you a re updating QLogic adapte r drivers: a. Cli ck Network Adapters (for NIC drivers)[...]

  • Seite 69

    3–Installatio n in a Windows Environment Installing Sof tware FE0254601-00 A 3-19 7. The Update Driver Sof tware Wizard start s. Click Browse my computer for driver software ( Figure 3-22 ). Figure 3-22. Starting the U pdate Driver Software Wizard 8. In the Update Driver Sof tware–Ethernet Controller d ialog box, click Browse , and then navigat[...]

  • Seite 70

    3–Installatio n in a Windows Environment Installing Sof tware 3-20 FE0254601-00 A 10. When the inst allation is complete, the message Windows has successfully installed/updated you r driver software appears. Click Close to exit. Inst alling the FCoE Dri ver for Windows Server 2008 This procedure describes how to inst all the FCoE driver for one a[...]

  • Seite 71

    3–Installatio n in a Windows Environment Installing Sof tware FE0254601-00 A 3-21 b. T o inst all the driver , right click Fibre Channel Contro ller , and then click Update Driver Software... ( Figu re 3-25 ). Figure 3-25. Installing an FC oE Driver for Windows 2008 6. If you a re updating QLogic adapte r drivers: a. Cli ck Storage controllers (f[...]

  • Seite 72

    3–Installatio n in a Windows Environment Installing Sof tware 3-22 FE0254601-00 A 7. The Update Driver Sof tware Wizard start s. Click Browse my computer for driver software ( Figure 3-28 ). Figure 3-28. Starting the U pdate Driver Software Wizard 8. In the Update Driver Sof tware–Ethernet Controller d ialog box, click Browse , and then navigat[...]

  • Seite 73

    3–Installatio n in a Windows Environment Installing Sof tware FE0254601-00 A 3-23 10. When the inst allation is complete, the message Windows has successfully installed/updated you r driver software appears. Click Close to exit. 1 1. If a reboot is required to complete the d river insta llation or update, Windows will prompt you ( Figure 3-30 ). [...]

  • Seite 74

    3–Installatio n in a Windows Environment Installing Sof tware 3-24 FE0254601-00 A 6. In the third column, click the versio n of the Microsoft Windows ope rating system that is inst alled on the server . For example, in Figure 3-31 , Windows Server 2008 R2 (64-bit) is selected for a QLE81 52 adapter . Figure 3-31. Select an Adapter and a Windows O[...]

  • Seite 75

    3–Installatio n in a Windows Environment Installing Sof tware FE0254601-00 A 3-25 10. Run the Windows SuperInst aller: a. Ext ract the setup.exe from the .ZIP file to a temporary loca tion on your system drive. b. Use Windows Explorer to navigate to the temporary location. c. In Windows Explorer , double-click the following file: Setup.exe 1 1. R[...]

  • Seite 76

    3–Installatio n in a Windows Environment Installing Sof tware 3-26 FE0254601-00 A Figure 3-34. Insert Driver Disk 6. Windows displays a list of drivers found on the disk ( Figure 3-35 ). Select QLogic FCoE Adapter , and then press ENTER. Figure 3-35. Select QLogic FCoE Adapter NOTE: Windows Server 2003 does no t support the use of USB memory stic[...]

  • Seite 77

    3–Installatio n in a Windows Environment Installing Sof tware FE0254601-00 A 3-27 7. Windows presents a list o f mass storage device drivers to load in addition to the standa rd drivers that have already been inst alled ( Figure 3-36 ). If required, specify other devices, or press ENT ER to continue with the installation . Figure 3-36. Instal l A[...]

  • Seite 78

    3–Installatio n in a Windows Environment Installing Sof tware 3-28 FE0254601-00 A 3. Whe n prompted to indicate the type of inst allation ( Figure 3-37 ), click Custom (advanced) . Figure 3-37. Windows Installation T ype 4. Whe n prompted to indicate where to inst all Windows ( Figure 3-38 ), click Load Driver . Figure 3-38. Windows Installation [...]

  • Seite 79

    3–Installatio n in a Windows Environment Installing Sof tware FE0254601-00 A 3-29 5. Whe n prompted to select the driver to be inst alled ( Figure 3-39 ), insert the QLogic driver disk (3.5-inch disk, USB memory stick, CD/DVD-ROM), click Browse , and then select the drive cont aining the QLogic driver disk. Figure 3-39. Insert the Driver Disk 6. [...]

  • Seite 80

    3–Installatio n in a Windows Environment Removing the Driver 3-30 FE0254601-00 A 7. Windows loads the QLogic FCoE driver , and displays all LUNs that were presented to the QLogic adapter for a boot-from-SAN installation. If LUNs are found, Windows prompt s you to select the disk/LUN on the SAN on which to install Windows Se rver 2008 ( Figure 3-4[...]

  • Seite 81

    3–Installatio n in a Windows Environment V erifying Driver Installation FE0254601-00 A 3-31 V erifying Driver Inst allation V erify every adapter installation to guarantee that the adapter drivers have been installed successfully and are o perational . T o verify the driver inst allation: 1. V erify that the server operating system can see the QL[...]

  • Seite 82

    3–Installatio n in a Windows Environment V erifying Driver Installation 3-32 FE0254601-00 A c. In Device Manager , under Network Adapters (for NIC Drivers) a nd Storage Controllers (for FCoE Drivers), right click on a QLogic-labeled entry , and then click Properties ( Figure 3-43 ). Figure 3-43. Network Adapters and S torage Controllers d. In the[...]

  • Seite 83

    3–Installatio n in a Windows Environment Firmware Upgrades FE0254601-00 A 3-33 Firmware Upgrades QLogic 8100 Series Converged Network Ada p ters ship with the latest firmware version. QLogic periodicall y releases new firmware versions, which can be downloaded from the QLogic W eb site as part of a multi-boot image . Always use the latest firmwar[...]

  • Seite 84

    3–Installatio n in a Windows Environment Firmware Upgrades 3-34 FE0254601-00 A 8. Under Boot Code, click the download link for the multi-boot image ( Figure 3-46 ). The multi-boot image cont ains firmware, BIOS and UEFI drivers, and the FlasUTIL and EFIUTIL utilities. Make a note of the FCoE firmware version included in the multi-boot image. Figu[...]

  • Seite 85

    3–Installatio n in a Windows Environment Firmware Upgrades FE0254601-00 A 3-35 1. In the QConvergeConsole web mana gement GUI, in the lef t pane, exp and the host to view the connected adapt ers. 2. Select th e port QLogic 8100 Series Ad apter for which to determine the installed firmware version. Th e HBA Info tabbed p age identifies the firmwar[...]

  • Seite 86

    3–Installatio n in a Windows Environment Firmware Upgrades 3-36 FE0254601-00 A 3. Exp and the physical Port 1, select the FCoE port, and then select the VPD tab ( Figure 3-48 ) in the right pane. The F lash Image V ersion appears at the bottom of the Port V ital Product Dat a (VPD) list. Figure 3-48. Displaying the Multi-boot Image V ersion Upgra[...]

  • Seite 87

    3–Installatio n in a Windows Environment Firmware Upgrades FE0254601-00 A 3-37 3. Under Flash, click Up date Entire Image ( Figure 3-52 ). Figure 3-49. QConvergeConsole—Update Entire Image 4. Click the Choose File b utton. The Open dialog box appears. 5. Navigate to and click on the file from which to update, then click Open . Make sure you sel[...]

  • Seite 88

    3–Installatio n in a Windows Environment Installing Management T ools 3-38 FE0254601-00 A Up dating Firmware Using QLogi c BIOS and UEFI Utilities Y ou can update firmware without a first installing an opera ting system on the server . Such firmware upgrades are considered of fline upgrades. T o update firmware on BIOS-based servers: 1. Boot the [...]

  • Seite 89

    3–Installatio n in a Windows Environment Insta lling Management T ools FE0254601-00 A 3-39  Offline utilities provide adapter maintenance function s for special circumst ances. Section 9 describe s the offline u tilities and their functions. The Windows operating system tool is the W indows Device Manager/Server Manager . Device Manager enable[...]

  • Seite 90

    3–Installatio n in a Windows Environment Installing Management T ools 3-40 FE0254601-00 A Inst alling and Launchi ng the QConvergeConsole The QConvergeConsole Installer for Windows is a self-extracting utility that installs the QConverge Console and related files. After you inst all the application on the server , you can start using the QConverg[...]

  • Seite 91

    3–Installatio n in a Windows Environment Insta lling Management T ools FE0254601-00 A 3-41 2. Click Next . If the Apache T omcat server is not installed, a message prompt s whether you want to install T omcat o n your system ( Figure 3-52 ). Figure 3-52. Install the QConvergeCons ole: Install T omcat on Y our System 3. Click Ye s . The Pre-Instal[...]

  • Seite 92

    3–Installatio n in a Windows Environment Installing Management T ools 3-42 FE0254601-00 A During the installation, th e installer notif ies you of the inst allation status ( Figure 3-54 ). Figure 3-54. Install the QConver geConsole: Installation Status A message prompts you to confirm that you want to enable the Secure Socket Layer (SSL) feature,[...]

  • Seite 93

    3–Installatio n in a Windows Environment Insta lling Management T ools FE0254601-00 A 3-43 The Install Complete dialog box ( Figure 3-56 ) opens. Figure 3-56. Install the QConvergeCons ole: Ins tall Complete Notification 6. Click Done to exit t he installer . Y ou have installed the QConvergeConsole on your server . 7. Inst all the management age[...]

  • Seite 94

    3–Installatio n in a Windows Environment Installing Management T ools 3-44 FE0254601-00 A Figure 3-57. QConvergeConsole Ma in Window on the Server Where QConvergeConsole Resides T o open QConvergeConsole from a remote c omputer: Enter the IP address of the QConverge Console server , followed by the access port and application name in the browser&[...]

  • Seite 95

    3–Installatio n in a Windows Environment Insta lling Management T ools FE0254601-00 A 3-45 Figure 3-58. Entering QConvergeConsole Web Address (Example) The initial main menu of the QConverg eConsole opens, as shown in Figure 3-59 . Figure 3-59. QConvergeConsole Main Window from a Remote Computer —Unpopulated V iew[...]

  • Seite 96

    3–Installatio n in a Windows Environment Installing Management T ools 3-46 FE0254601-00 A Inst alling and Launching the QConvergeConsole CLI Y ou can install the QConvergeConsole CL I from the command prompt using the Microsoft ® Windows Insta ller (MSI). Use one of the follo wing methods:  S tandard Windo ws Interactive (CLI) Inst allation ?[...]

  • Seite 97

    3–Installatio n in a Windows Environment Insta lling Management T ools FE0254601-00 A 3-47 Overwrite Previous Windows Inst allations T ype the following for an installation that overwrites any prev ious installations without asking for confirmation. T ype: QCCCLI.msi /i forceinstall=true St arting the QConvergeConsole CLI Y ou can st art the QLog[...]

  • Seite 98

    3–Installatio n in a Windows Environment Installing Management T ools 3-48 FE0254601-00 A[...]

  • Seite 99

    FE0254601-00 A 4-1 4 Inst allation in a Linux Environment Overview This section describes how to inst all a QLogic 8100 Series Adapter in a Linux server , including system requirements, hardw are inst allation, driver installation, and software inst allation. System Requirement s Operating System Requirement s The QLogic 8100 Series Adapter support[...]

  • Seite 100

    4–Installation in a L inux Environme nt Installing Hardware 4-2 FE0254601-00 A  The server motherboard must have a PCIe slot of at least x8 ph ysical length. Both PCIe Gen 1 and Gen 2 slots are supp orted. QLogic adapters operate on all eight lanes on a PCIe Gen 1 x8 slot, and automatically train d own to use only four lanes on a PCIe Gen 2 x8[...]

  • Seite 101

    4–Installation in a Linux Environment Installing Hardware FE0254601-00 A 4-3 Inst all the Adapter T o install the ada pter: 1. Record the adapter model number , which can be found on the bar cod e label on the board. 2. Determine whether the server requires a f ull-height or a half-he ight adapter bracket. The QLogic 8100 Series Ad apter ships wi[...]

  • Seite 102

    4–Installation in a L inux Environme nt Installing Hardware 4-4 FE0254601-00 A 1 1. Connect the other end of the Ethe rnet cable to a supported switch. 12. Plug in the power cables and power up the server . Figure 4-1. Adapter Hardware[...]

  • Seite 103

    4–Installation in a Linux Environment Installing Hardware FE0254601-00 A 4-5 V erify the Adapter Inst allation T o verify that the adapter is prope rly inst alled a nd that it can be recognized as a PCIe device by the server: 1. While t he host server is booting, verify that the adapter BIOS banner appears without errors. Some servers may require[...]

  • Seite 104

    4–Installation in a L inux Environme nt Installing Sof tware 4-6 FE0254601-00 A Inst alling Sof tware The FCoE driver (STO R Miniport) and NIC driver (NDIS Miniport) provide the adapter ’s Fibre Channel and Ethernet cap abilities, respectively . The adapter driver installation process depends on th e Li nux operating system version that is inst[...]

  • Seite 105

    4–Installation in a Linux Environment Installing Sof tware FE0254601-00 A 4-7 6. In the third column, click the version of the Linux operating system that is installed on the server , and then click Go . For example, in Figure 4-3 , Linux Red Hat (64-bit) is selected for a QLE8152 adapter . Figure 4-3. Select an Adapte r and a Linux Operating Sys[...]

  • Seite 106

    4–Installation in a L inux Environme nt Installing Sof tware 4-8 FE0254601-00 A 10. Insert the RHEL 5 inst allation DVD into the op tical drive on the server , or into another drive that cont ains the following packet files for the RHEL 5 version and architecture inst alled on the server:  kernel-headers-2.6.18-164.el5.x86_ 64.rpm  kernel-d[...]

  • Seite 107

    4–Installation in a Linux Environment Installing Sof tware FE0254601-00 A 4-9 14. In the directory that cont ains the driver source file, qla2xxx-src-x.xx.xx.xx.xx.xx-k.tar .gz , type the following commands to expand the compressed file: # tar -xzvf qla2xxx-src- x . xx . xx . xx . xx . xx -k.tar.gz # cd qla2xxx-src- x . xx . xx . xx . xx . xx -k [...]

  • Seite 108

    4–Installation in a L inux Environme nt Installing Sof tware 4-10 FE0254601-00 A a. Change to th e directory that cont ains the RAMDISK images. # cd /boot b. Create a backup copy of the RAMDISK (initrd) image. # cp initrd- [kernel version] .img initrd- [kernel version] .img.bak c. Generate a new RAMDISK image cont aining the updated QLogic FCoE d[...]

  • Seite 109

    4–Installation in a Linux Environment Installing Sof tware FE0254601-00 A 4-1 1 Inst alling the FCoE Driver for RHEL 5.3 Boot-from-SAN The RHEL 5.3 operating system do es not include th e QLogic 8100 Series Ad apter drivers. Therefore, to boot from SAN, you must load the adapter drivers during the operating system inst allation. QLogic prov ides [...]

  • Seite 110

    4–Installation in a L inux Environme nt Installing Sof tware 4-12 FE0254601-00 A 7. Under Drivers , click the downloa d link for FC-FCoE DD-Kit ( Figure 4-8 ). Figure 4-8. Download the FC-FCoE DD-Kit 8. Read the QLogic license ag reement, and then click Agree . 9. When prompted, click Save to save the driver file to the hard drive. The compressed[...]

  • Seite 111

    4–Installation in a Linux Environment Installing Sof tware FE0254601-00 A 4-13 14. Configure the server to boot from the optical drive, and power up the server . The system boots from the CD and stops a t the boot: prompt ( Figure 4-9 ). Figure 4-9. RHEL 5.3 Boot Screen 15. At the boot: prompt, press th e F2. 16. In the Installe r Boot Options sc[...]

  • Seite 112

    4–Installation in a L inux Environme nt Installing Sof tware 4-14 FE0254601-00 A 17. The Driver Disk message box pr ompt s you for a driver disk: click YES , and then press ENTER. 18. From the Driver Disk Source window , select the driver source:  If the driver disk is a 3.5-inch floppy disk, select fd0 , and then press ENTER.  If the drive[...]

  • Seite 113

    4–Installation in a Linux Environment Installing Sof tware FE0254601-00 A 4-15 6. In the third column, select the version of the Linux Operating System that is installed on the server , and then click Go ( Figure 4-1 1 ). For example, in Figure 4-1 1 , Linux Red Hat (64-bit) is selected for a QLE8152 adapter . Figure 4-1 1. Select an Adapte r and[...]

  • Seite 114

    4–Installation in a L inux Environme nt Installing Sof tware 4-16 FE0254601-00 A 10. Insert the RHEL 5 inst allation DVD into the op tical drive on the server , or into another drive that cont ains the following packet files for the RHEL 5 version and architecture inst alled on the server .  kernel-headers-2.6.18-164.el5.x86_ 64.rpm  kernel[...]

  • Seite 115

    4–Installation in a Linux Environment Installing Sof tware FE0254601-00 A 4-17 15. In the directory that cont ains the source driver file, qlge_ x.x.x.xx-ddmmyy_xx_x.x.xx .tgz , type the following commands to expand the compressed file: # tar -xzvf qlge_ x . x . x . xx - ddmmyy _ xx _ x . x . xx .tgz # cd qlge 16. Build and install t he driver mo[...]

  • Seite 116

    4–Installation in a L inux Environme nt Installing Sof tware 4-18 FE0254601-00 A c. Create a new RAMDISK image cont aining the updated QLogic networking driver . # mkinitrd -f initrd-[kernel version].img `uname -r` Depending on the server hardware, the RAMDISK file name may be slightly dif ferent. The command is successful if there is no ou tput.[...]

  • Seite 117

    4–Installation in a Linux Environment V erifying the Driver Installation FE0254601-00 A 4-19 V erifying the Driver Inst allation V erify every adapter to guarantee that the FCoE and networking adapter drivers have been inst alled successfully and operational. T o verify the driver inst allation: 1. Use the lsmo d command to list the loaded kernel[...]

  • Seite 118

    4–Installation in a L inux Environme nt Removing Drivers 4-20 FE0254601-00 A  The following example displays the FCoE driver information: # modinfo -F version qla2xxx 8.03.01.06.05.06-k  The following example displays the networking driver information: # modinfo –F version qlgc 1.00.00.23 3. Obser ve the adapter Link/Enet T raffic LED and[...]

  • Seite 119

    4–Installation in a Linux Environment Firmware Upgrades FE0254601-00 A 4-21 Firmware Upgrades QLogic 8100 Series Converged Network ad apters ship with the latest available firmware version. QLogic pe riodically releases new fi rmware versions, which can be downloaded from the QL ogic Web site as p art of a multi-boot image. Always use the latest [...]

  • Seite 120

    4–Installation in a L inux Environme nt Firmware Upgrades 4-22 FE0254601-00 A 7. Under Boot Code, click the download link for the multi-boot image ( Figure 4-15 ). The multi-boot image cont ains firmware, BIOS and UEFI drivers, and the FlasUTIL and EFIUTIL utilities. Make note of the FCoE firmware version included in the multi-boot image. Figure [...]

  • Seite 121

    4–Installation in a Linux Environment Firmware Upgrades FE0254601-00 A 4-23 Figure 4-16. Displaying the A dapter Firmware V ersion 3. Exp and the Port node and select the FCoE port. NOTE: Ignore the driver firmware version listed under Informatio n; it is not related to the installed a dapter firmware version. QL ogic 8100 Series Adapter drivers [...]

  • Seite 122

    4–Installation in a L inux Environme nt Firmware Upgrades 4-24 FE0254601-00 A 4. In the right pane, click the FCoE tab ( Figure 4-17 ). The MPI firmware version is listed under the Information section. Figure 4-17. Displaying the Adapter MPI Firmware V ersion Displaying the Firmware V ersion Using sysfs The sysfs interface is a vailable to adva n[...]

  • Seite 123

    4–Installation in a Linux Environment Firmware Upgrades FE0254601-00 A 4-25 3. Under Flash, click Up date Entire Image ( Figure 4-18 ). Figure 4-18. QConvergeConsole—Update Entire Image 4. In the Open pop-up window , browse to the temporary folder that cont ains the extracted multi-boot image, and then select the Flash file ( .BI N ). 5. Click [...]

  • Seite 124

    4–Installation in a L inux Environme nt Management T ool Installation 4-26 FE0254601-00 A Using QLogic BIOS and UEFI Utilities Y ou can update firmware without a first installing an opera ting system on the server . Such firmware upgrades are considered of fline upgrades. T o update firmware on BIOS servers: 1. Boot the server into DOS using eith[...]

  • Seite 125

    4–Installation in a Linux Environment Management T ool Installation FE0254601-00 A 4-27  Linux Network Int erface Configuration T ools — A set of tools, including ifconfig and neat, that configure p arameters such as IP address and network interface st atus. For more information abo ut these tools, refer to the tool manual p ages. Obt aining[...]

  • Seite 126

    4–Installation in a L inux Environme nt Management T ool Installation 4-28 FE0254601-00 A Inst alling and Launching QConvergeConsole T o install and launch the QConvergeConsole: QConvergeConsole can be inst alled on a Linux host by running a Virtual Network Computing (VNC ® ) program on a Windows host to remotely co ntrol the installation. VNC V[...]

  • Seite 127

    4–Installation in a Linux Environment Management T ool Installation FE0254601-00 A 4-29 4. Click Run in T erminal . The installer extracts the files and inst alls QConvergeConsole in the directory /opt/QConve rgeConsole_Installer ( Figure 4-23 ). Figure 4-23. Install th e QConvergeConsole: In staller Extracts FIles The InstallAnywhere window prep[...]

  • Seite 128

    4–Installation in a L inux Environme nt Management T ool Installation 4-30 FE0254601-00 A The Pre-Installation Summary dialog b ox ( Figure 4-25 ) opens. Figure 4-25. Install the QConvergeC onsole: Pre-Installation Summary 6. Read the information, and then click Inst all .[...]

  • Seite 129

    4–Installation in a Linux Environment Management T ool Installation FE0254601-00 A 4-31 During the installation, th e installer notif ies you of the inst allation status ( Figure 4-26 ). Figure 4-26. Install the QConver geConsole: Installation Status[...]

  • Seite 130

    4–Installation in a L inux Environme nt Management T ool Installation 4-32 FE0254601-00 A The Install Complete dialog box ( Figure 4-27 ) opens. Figure 4-27. Install the QConvergeCons ole: Ins tall Complete Notification 7. Click Done to exit t he installer . Y ou have installed the QConvergeConsole on your server . 8. Inst all the management agen[...]

  • Seite 131

    4–Installation in a Linux Environment Management T ool Installation FE0254601-00 A 4-33 Figure 4-28. QConvergeConsole Ma in Window on the Server Where QConvergeConsole Resides T o open QConvergeConsole from a remote c omputer: Enter the IP address of the QConverge Console server , followed by the access port and application name in the browser&ap[...]

  • Seite 132

    4–Installation in a L inux Environme nt Management T ool Installation 4-34 FE0254601-00 A Figure 4-29. Entering QConvergeConsole Web Address (Example) The initial main menu of the QConverg eConsole opens, as shown in Figure 4-30 . Figure 4-30. QConvergeConsole Main Window from a Remote Computer —Unpopulated V iew[...]

  • Seite 133

    4–Installation in a Linux Environment Management T ool Installation FE0254601-00 A 4-35 Inst alling and Launching the QLogic Linux T ools The QLogic Linux utilities manage the adapter FCoE function. The QLogic L inux tools pack age ( Linux-Tools- yyyymmdd-x .tgz ) is a compressed file that contains the utility p ackages described in T able 4-1 . [...]

  • Seite 134

    4–Installation in a L inux Environme nt Management T ool Installation 4-36 FE0254601-00 A For information about using th e Linux utilities, refe r to “Using the QLogic Linux Utilities” on page 8-4 1 . ql-hba-snapshot- x . xx / ./ql-hba-snapshot.sh ql-lun-state-online- x . x / ./ql-lun-state-online.sh –i ql-set-cmd-timeout- x . x / ./ql-set-[...]

  • Seite 135

    FE0254601-00 A 5-1 5 Inst allation in a VMware Environment Overview This section describes how to inst all a QLogic 8100 Series Adapter in VMware ® ESX/ESXi environments including, hardware inst allation, driver inst allation, and software inst allation. Inst alling Hardware T o install the ada pter: 1. Record the adapter model number , which can [...]

  • Seite 136

    5–Installation in a VMware Environment Installing Hardware 5-2 FE0254601-00 A c. Carefully remove the full-height bracket by pulling it away from the card. d. Fit the half-he ight bracket whil e aligning the slot s for the SFP+ transceivers an d LEDs. e. Fasten t he half-height bracke t using the screws provid ed. f. Reinstall the SFP+ tra nsceiv[...]

  • Seite 137

    5–Installation in a VMware Environment Installing the FCoE an d Networking Drivers FE0254601-00 A 5-3 Figure 5-1. Adapter Hardware 12. V erify the LEDs on the adapter to ensure proper operation. For information about LED indications, refer to Appendix A . Inst alling the FCoE and Networking Drivers The QLogic 8100 Series Adapter driver is not inc[...]

  • Seite 138

    5–Installation in a VMware Environment Installing the FCoE and Networking Drivers 5-4 FE0254601-00 A 5. Select VMware ESX/ESXi in the third column of the selection list, and then click Go ( Figure 5-2 ). Figure 5-2. Select Adapter Software for VMware by Operating System 6. In the Drivers table, click the li nks that correspond to the following de[...]

  • Seite 139

    5–Installation in a VMware Environment Installing the FCoE an d Networking Drivers FE0254601-00 A 5-5 8. On the ESX host server , in maintenance mode, select the Summary tab ( Figure 5-4 ). Figure 5-4. Selecting the Summary T ab 9. Right-click the storag e icon, and then select Browse Dat astore ( Figure 5-5 ). Figure 5-5. Selecti ng Browse Datas[...]

  • Seite 140

    5–Installation in a VMware Environment Installing the FCoE and Networking Drivers 5-6 FE0254601-00 A 10. In the Datasto re Browser , create a temporary folder in which to store the driver ISO files ( Figure 5-6 ). Figure 5-6. Creating a T emporary Folder in Which to Store t he Driver ISO Files 1 1. Click the Upload icon to upload the driver ISO f[...]

  • Seite 141

    5–Installation in a VMware Environment Installing the FCoE an d Networking Drivers FE0254601-00 A 5-7 13. Change to the directory that cont ains the driver ISO files by issuing the following command: # cd /vmfs/volumes/Storage1/ <esxconsole> /temp 14. Mount the first ISO file under the ESX host server by issu ing the following command: # mo[...]

  • Seite 142

    5–Installation in a VMware Environment Installing the FCoE and Networking Drivers 5-8 FE0254601-00 A 24. Unmount the first ISO file from the ESX host server by is suing the following command: # umount /mnt/cdrom 25. Reboot the ESX host server to comple te the driver installation and exit maintenance mode. V erifying Driver Inst allation T o verif[...]

  • Seite 143

    5–Installation in a VMware Environment Installing the FCoE an d Networking Drivers FE0254601-00 A 5-9 The example in Figure 5-10 shows the details for FCo E adapter 3, including the current state, the firmware versio n, the driver version, and the boot code version. Figure 5-10. Displaying FCoE Adapter Driver Details 5. List details for the QLogi[...]

  • Seite 144

    5–Installation in a VMware Environment Installing the FCoE and Networking Drivers 5-10 FE0254601-00 A Figure 5-1 1. Displaying Networ king Adapter Driver Details[...]

  • Seite 145

    5–Installation in a VMware Environment Identifying QLogic Adapters Using vS phere Client FE0254601-00 A 5-1 1 6. Display adapter ne tworking driver and firmware versions f or QLogic vmnic interfaces by issuing the following command: # ethtool –i vmnic [N] In this command, [N] is the adapter number that corresponds to a QLogic interface from the[...]

  • Seite 146

    5–Installation in a VMware Environment Configuring NIC Usin g the vS phere Client 5-12 FE0254601-00 A Figure 5-13. Displaying S torage Ad apters Using the vSphere Client 4. In the Hardware pane, select Network Ad apters to display all network adapters, as shown in Figure 5-14 . Figure 5-14. Displaying Network Ad apters Using th e vSphere Client C[...]

  • Seite 147

    5–Installation in a VMware Environment Configuring NIC Using the vS phere Client FE0254601-00 A 5-13 3. Open th e vS phere client, and then click the Configuration tab. 4. In the Hardware pa ne, select Networking , as sh own in Figure 5-15 . Figure 5-15. Configuri ng Networking Adapters 5. Select Add Networking . . in the upper right portion of t[...]

  • Seite 148

    5–Installation in a VMware Environment Configuring NIC Usin g the vS phere Client 5-14 FE0254601-00 A 7. Click the vmnic associated with the QLogic adapter to be con nected to the new virtual switch, and then click Next . Figure 5-17. Selecting the V irtual Switch 8. Modify the network label and VLAN ID if needed, an d then click Next ( Figure 5-[...]

  • Seite 149

    5–Installation in a VMware Environment Configuring the Driver Parameters FE0254601-00 A 5-15 Figure 5-18. Modifying the Ne twork Label and the VLAN ID 9. Click Finish to comple te the addition of the networking interface. Configuring the Driver Parameters Use the esxcfg-module command to configure the QLogic Fibre Channel a nd Converged Network A[...]

  • Seite 150

    5–Installation in a VMware Environment Configuring the Driver Parameters 5-16 FE0254601-00 A 4. Reboot the server to place the parameter changes into ef fect. # reboot T able 5-1 describes the configurable QLogic driver p arameters. T able 5-1. esxcfg-module Configurable Driver Para meters Driver Parameter Description ql2xallocfwdump Enables (1) [...]

  • Seite 151

    5–Installation in a VMware Environment Configuring the Driver Parameters FE0254601-00 A 5-17 ql2xplogiabsent device Enables (1) or disabl es (0) PLOGI (port login) to devices that are not pr esent af ter a fabric scan. Enabling this p a ramete r is required to work around some Fibre Channel switch defe cts. The defaul t is 0. ql2xqfullrampup Numb[...]

  • Seite 152

    5–Installation in a VMware Environment Configuring a Hard Driv e in a Virtual Machine 5-18 FE0254601-00 A Configuring a Hard Drive in a V irtual Machine T o configure a hard drive in a virtual machin e: 1. Open vS phere and exit maintenance mode on the vS phere client ( Figure 5-19 ). Figure 5-19. Exiting Maintenance Mode 2. Power of f the virtua[...]

  • Seite 153

    5–Installation in a VMware Environment Configuring a Hard Drive in a Virtual Machine FE0254601-00 A 5-19 6. Click Add in the V irtual Machine Properties wind ow to add a device to the virtual machine ( Figure 5-21 ). Figure 5-21. V irtual Ma chine Properties Window[...]

  • Seite 154

    5–Installation in a VMware Environment Configuring a Hard Driv e in a Virtual Machine 5-20 FE0254601-00 A 7. Select a device. In this example, select Hard Drive to add a storage device to the virtual machine, and then click Next ( Figure 5-22 ). Figure 5-22. Add Hardware — Device T ype 8. Select the typ e of disk. Click Raw Device Mappings , an[...]

  • Seite 155

    5–Installation in a VMware Environment Configuring a Hard Drive in a Virtual Machine FE0254601-00 A 5-21 9. Select a t arget LUN. In this example, accept the selected LUN, and then click Next ( Figure 5-24 ). Figure 5-24. Add Hardwa re — Select T arget LUN 10. Select a dat astore. In this example, accept th e default, St ore with V irtual Machi[...]

  • Seite 156

    5–Installation in a VMware Environment Configuring a Hard Driv e in a Virtual Machine 5-22 FE0254601-00 A 1 1. Select a compatibility mo de. In this example, accept the default, Physical , and then click Next ( Fig ure 5-26 ). Figure 5-26. Add Hardware — Compatibility Mode 12. Select advanced options. In this exam ple, accept the default, and t[...]

  • Seite 157

    5–Installation in a VMware Environment Configuring a Hard Drive in a Virtual Machine FE0254601-00 A 5-23 13. Review the disk settings, and then click Finish to complete the configuration ( Figure 5-28 ). Figure 5-28. Add Hardware — Ready to Complete 14. Observe the New Hard Disk (adding) entry in the V irtual Machine Properties window , and the[...]

  • Seite 158

    5–Installation in a VMware Environment Configuring a Network Adap ter in a Virtual Mac hine 5-24 FE0254601-00 A Configuring a Network Adapter in a V irtual Machine T o configure a network ad apter in a virtual machine: 1. Open vS phere and exit maintenance mode on the vS phere client ( Figure 5-30 ). Figure 5-30. Exiting Maintenance Mode 2. Power[...]

  • Seite 159

    5–Installation in a VMware Environment Configuring a Network Ad apter in a V irtual Machine FE0254601-00 A 5-25 6. Click Add in the V irtual Machine Properties wind ow to add a device to the virtual machine ( Figure 5-21 ). Figure 5-32. V irtual Ma chine Properties Window[...]

  • Seite 160

    5–Installation in a VMware Environment Configuring a Network Adap ter in a Virtual Mac hine 5-26 FE0254601-00 A 7. Select the Etherne t adapter device, and then click Next ( Figure 5-33 ). Figure 5-33. Add Hardware — Select Adapter 8. Select the adap ter type and network connection. For info rmation about these options, refer to the VMware docu[...]

  • Seite 161

    5–Installation in a VMware Environment Configuring a Network Ad apter in a V irtual Machine FE0254601-00 A 5-27 9. Review the adapter settings, and then click F inish to complete the adapter configuration ( Figure 5-35 ). Figure 5-35. Add Hardware — Ready to Complete 10. Observe the New NIC (a dding) entry in the V irtual Machine Properties win[...]

  • Seite 162

    5–Installation in a VMware Environment Deploying NPIV for VMware ESX/ESXi 4.0 5-28 FE0254601-00 A Deploying NPIV for VMware ESX/ESXi 4.0 QLogic Fibre Channel and Converged Ne twork Adapt ers support N_Port ID virtualization (NPIV) for Fibre Channe l and FCoE SANs. NPIV enables each virtual machine to have its own Fibre Chan nel-FCoE WWPN by creat[...]

  • Seite 163

    5–Installation in a VMware Environment Deploying NPIV for VMware ESX/ESXi 4.0 FE0254601-00 A 5-29 Assigning WWNs to V irtual Machines Y ou can assign a WWN to a new virtua l machine with an RDM disk when you create the virtual machine, or to an exist ing virtual machine that has been powered of f. T o create an NPIV -ready virtual machine: 1. Ope[...]

  • Seite 164

    5–Installation in a VMware Environment Deploying NPIV for VMware ESX/ESXi 4.0 5-30 FE0254601-00 A 5. Proceed th rough the configuration procedure (Name and Location, Datastore, V irtual Machine V ersion, Guest Operating System, CPUs, Memory , Network, SCSI Controller) as you would for a ny non-NPIV virtual machine. 6. Select a disk. In this examp[...]

  • Seite 165

    5–Installation in a VMware Environment Deploying NPIV for VMware ESX/ESXi 4.0 FE0254601-00 A 5-31 7. Select the LUN to att ach to the VM, and then click Next ( Figure 5-40 ). Figure 5-40. Create New V irtual Machine — Select T arget LUN 8. Select th e datastore on wh ich to store the LUN mapp ing. In this example, click Store with V irtual Mach[...]

  • Seite 166

    5–Installation in a VMware Environment Deploying NPIV for VMware ESX/ESXi 4.0 5-32 FE0254601-00 A 9. Select the co mpatibility mode. In this example, click Vir t ua l , and then click Next ( Figure 5-42 ). Figure 5-42. Create New V irt ual Mac hine — Compatibility Mode 10. Select advanced options. In this exam ple, accept the default, and t hen[...]

  • Seite 167

    5–Installation in a VMware Environment Deploying NPIV for VMware ESX/ESXi 4.0 FE0254601-00 A 5-33 12. Select the Options t ab in the Virtual Machine Properties window . 13. Select Fibre Channel NPIV in the lef t pane, click Ge nerate new WWNs, and then click Finish ( Figure 5-44 ). Figure 5-44. V irtual Machine Properties — Generate New WWNs 14[...]

  • Seite 168

    5–Installation in a VMware Environment Deploying NPIV for VMware ESX/ESXi 4.0 5-34 FE0254601-00 A c. Confirm the node WWN and port WWN in the WWN Assignment field of the Vi rtual Machines Properties window ( Figure 5-45 ). Figure 5-45. Confirm Node and Port WWNs NOTE:  Do NOT power on the virtual machine prior to configuring zon ing and LUN ma[...]

  • Seite 169

    FE0254601-00 A 6-1 6 Configuring NIC Functionality in the Converged Network Adapter Overview QLogic 8100 series Converged Network A dapter provides both NIC and FCoE server connectivity to host s. This section describes the NIC paramet ers, management tools and configurat ion options for the QLogic 810 0 Series Adapter for a Windows environmen t an[...]

  • Seite 170

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Windows Environ ment 6-2 FE0254601-00 A T o access the Device Manager: 1. Click St ar t , right-click My Computer , and then click Device Manager to display a list of devices, as shown in Figure 6-1 . Figure 6-1. Accessi ng Device Manager 2. Under Network A[...]

  • Seite 171

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Windows Environme nt FE0254601-00 A 6-3 Figure 6-2. Adapters Properties Dialog Box Managing the NIC Function with the QConvergeConsole CLI The QConvergeConsole CLI configures the tea ming and VLANs for the NIC function driver . The CLI also performs diagno[...]

  • Seite 172

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Windows Environ ment 6-4 FE0254601-00 A Figure 6-3. Main Interactive Menu NIC Driver Parameters (Windows) T able 6-1 lists the QLogic 810 0 Series Adapter NIC function driver parameters for Windows, their default values, and allowe d values.[...]

  • Seite 173

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Windows Environme nt FE0254601-00 A 6-5 T able 6-1. NIC Driver Parameters for Windows Parameter Name Function Default Va l u e Range Method to Configure CheckSumOf- floadSupport Bucket to enable, disable all IP , TCP , UDP checksum offload driver capabilit[...]

  • Seite 174

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Windows Environ ment 6-6 FE0254601-00 A Jumbo Packet Enables Jumbo Packet capability for TCP/IP pack- et s. When la rge pa cket s make up the majority of tr af- fic, and additional latency can be tole rated, jumbo packet s can reduce CPU use and improv e wi[...]

  • Seite 175

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Windows Environme nt FE0254601-00 A 6-7 PriorityVLANT ag Enables the sending and receiving of IEEE 802.3ac tagge d frames, which include:  802.1p QoS (Quality of Service) tags for prior - it y-ta gg ed pa cke ts  802.1Q ta gs for VLANs When this feat[...]

  • Seite 176

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Windows Environ ment 6-8 FE0254601-00 A TCPChecksumO ffload IPv6 Computes (Tx) or verifies (Rx) the TCP checksum of packet s in IPv6. This fea- ture can im prove perfor - mance and reduce CPU use. With Offloading enabled, the adap ter com- putes or ve rifie[...]

  • Seite 177

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Windows Environme nt FE0254601-00 A 6-9 Offload Support The QLogic 8100 Series Adapter offloads the processing of several common protocols onto it s hardware; this saves host CPU cycles, increases pe rformance, and reduces CPU use. The QLogic 8100 Se ries [...]

  • Seite 178

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Windows Environ ment 6-10 FE0254601-00 A about the CheckSumOf fload parameter , refer to T able 6-1 Do not turn of f checksum offload unless you are debugging a checksum compu tation problem. TCP checksum of floading signi ficantly reduced reduces host CPU [...]

  • Seite 179

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Windows Environme nt FE0254601-00 A 6-1 1 Network applications that have a large num ber of short-lived connection s, such as Web servers and data base se rvers, typically benefit from RSS. The RSS feature must be enabled on bo th the QLogic adapte r and i[...]

  • Seite 180

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Windows Environ ment 6-12 FE0254601-00 A 4. Search for a DWORD named Ena bleRSS.  If none exists, RSS is enabled, and no action is required.  If a DWORD named EnableRSS exist s, double-click EnableRSS , type 1 , and then click OK to enable RSS. 5. Res[...]

  • Seite 181

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Windows Environme nt FE0254601-00 A 6-13 Disabling RSS in the Microsof t W in dows Networking St ack RSS can be disabled on the QLogic adapter on a per port basis by accessing the Windows property pag es for the QLogic 10Gb PCI Et hernet adapter , or globa[...]

  • Seite 182

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Windows Environ ment 6-14 FE0254601-00 A Disabling RSS per Port Using the Windows Advanced Property Pages T o disable RSS per port using the Windows Advanced Property p ages ( Figure 6-9 ): 1. Select ReceiveSideSc aling under the Property box in the Advance[...]

  • Seite 183

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Windows Environme nt FE0254601-00 A 6-15 HDS is disabled on QLogic 8100 Series Adapters by default and can be enabled using the Windows Advanced Property Pa ges for the QLogic 10Gb PCI Ethernet adapter port through the Windo ws Device Manager . T o enable [...]

  • Seite 184

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Windows Environ ment 6-16 FE0254601-00 A A protocol address, such as an IP addres s, is usually assigned to the physical adapter . However , when the QLogic NIC teaming driver and the QConvergeConsole CLI are used to create a team, the protocol address is a[...]

  • Seite 185

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Windows Environme nt FE0254601-00 A 6-17 Creating and Configuring a T eam T wo or more QLogic adapter ports must be available in a server to configure teaming; all members of t he team must be QLogic adapter port s. T o configure switch-independent teaming[...]

  • Seite 186

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Windows Environ ment 6-18 FE0254601-00 A 6. The cu rrent VLAN/teaming driver version and the version to be inst alled are displayed. If this is correct, type Yes to proceed with the inst allation ( Figure 6-12 ). Figure 6-12. Confirm VLAN/T eaming Driver In[...]

  • Seite 187

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Windows Environme nt FE0254601-00 A 6-19 Figure 6-13. Creating a T eam 10. After successfully creating a te am, a new logical interface appears in the Microsoft Windows Net work Conne ctions window as shown in Figure 6-14 . Figure 6-14. Logical Interface ?[...]

  • Seite 188

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Windows Environ ment 6-20 FE0254601-00 A 1 1. Configure of the team by assigning a dynamic o r static IP add ress to the QLogic VT -IM Miniport Driver logical interface. The windows command, ipconfig /all , list s the newly created team but not the physical[...]

  • Seite 189

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Windows Environme nt FE0254601-00 A 6-21 After a team h as been deleted, the corresponding QLogic VT -IM Miniport Driver logical interface is removed from t he Microsof t Windows Network Connections window . Enter the Windows command, ipconfig /all , to li[...]

  • Seite 190

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Windows Environ ment 6-22 FE0254601-00 A 4. In the Host Level Info & Operations menu, type 2 and press ENTER to select Install/Update VLAN/Teaming Driver, All Adapters ( Figure 6-16 ). Figure 6-16. Host Level Info & Operations Menu 5. At the prompt,[...]

  • Seite 191

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Windows Environme nt FE0254601-00 A 6-23 8. In the main Interactive Menu, type 4 and press ENTER to select Configure VLANs Menu . 9. In th e Configure VLANs menu , type 3 , and then press ENTER to select Add VLAN to Port or Team ( Figure 6-18 ). a. Choose [...]

  • Seite 192

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Windows Environ ment 6-24 FE0254601-00 A 12. After successfully assigning a VLAN ID to th e team or interface, a new logical interface appears in the Microsof t Windows Network Connections window as shown in Figure 6-19 , and the local area conne ction for [...]

  • Seite 193

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Windows Environme nt FE0254601-00 A 6-25 d. Af ter successfully removing the VLAN ID assignment, press ENTER to return to the previous menu. Figure 6-20. Removing VLAN ID Assignments After a VLAN ID assignment has been removed , the corresponding QLogic VT[...]

  • Seite 194

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Windows Environ ment 6-26 FE0254601-00 A 1. Setup PXE boot and DHCP server . T o se tup a Microsoft Windows server as a DHCP and a OXE boot server , the foll owing Windows services must be configured:  DHCP services  Remote installation services (RIS)[...]

  • Seite 195

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Windows Environme nt FE0254601-00 A 6-27 3. Set up client servers BIOS boot order . Select 8100 Series NIC as the first boot device in the Boot order/Boot De vice priority ( Figure 6-21 ). The two QLogic UNDI v1.11 PXE-2 entries are d ual-port QLogic 8100 [...]

  • Seite 196

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Windows Environ ment 6-28 FE0254601-00 A Figure 6-22. PXE Operation 1. As the server boots up , the QLogic adapter PXE bo ot code start s from the adapter Flash memory . This boot code is part of the multi-boot image that is resident on the QLogic adapter .[...]

  • Seite 197

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Linux Environment FE0254601-00 A 6-29 Configuring the NIC in a Linux Environment Configuring the QLogic 8100 Series Adapter NIC function in RHEL 5 environment s can be accomplished usi ng the following built-in utilities and functions:  ethtool — An i[...]

  • Seite 198

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Linux Enviro nment 6-30 FE0254601-00 A tx-checksumming (tx) Enables or disables hardware t ransmit TCP/UDP checksum On Off, On ethtool scatter-gat her (sg) Enables or disables scatter-gather and 64-bit DMA on x86 On Off, On ethtool tcp segmen tation offload[...]

  • Seite 199

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Linux Environment FE0254601-00 A 6-31 Modifying NIC Driver Parameters (Linux) The driver parameters describ ed in T able 6-2 can be modified using various methods. Some of these para meters require a server reboot or a reload of the QLogic NIC driver (qlge[...]

  • Seite 200

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Linux Enviro nment 6-32 FE0254601-00 A Making Nonpersistent Changes to the QLogic NIC Driver Parameters To make changes that are not persistent a cross reboots, use the modprobe command to sp ecify the driver parameters and t heir values. For example: 1. Un[...]

  • Seite 201

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Linux Environment FE0254601-00 A 6-33 2. Add the options line fo r the appropriate driver setting ( Figure 6-23 ), save the file, and then exit the editor . options qlge qlge_irq_type =1 qlge_mpi_coredump=0 Figure 6-23. Example modprobe.conf 3. Create a ne[...]

  • Seite 202

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Linux Enviro nment 6-34 FE0254601-00 A Using sysfs The sysfs virtual file system, provided by Linu x 2.6 kernels, is a vailable in RHEL 5. It export s information about supported de vices and drivers from the kernel device model into user sp ace and configu[...]

  • Seite 203

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Linux Environment FE0254601-00 A 6-35 3. V erify that the values for the p arameter have changed. The output of the following command should be 1 if the command in St e p 2 was successful. For example: # cat /sys/module/qlge/parameters/ql2xmaxqdepth or cat[...]

  • Seite 204

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Linux Enviro nment 6-36 FE0254601-00 A Making Persistent Cha nges Using ethtool T o make changes that are persistent across reboot s, choose one of the following:  Edit the file /etc/sysconfig/networkin g-scripts/ifcfg-ethX , add required ETHT OOL_OPTS, [...]

  • Seite 205

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Linux Environment FE0254601-00 A 6-37 Using ifconfig Use the Linux network interface configuration command ifconfig to modify the driver paramete rs that are listed in T able 6-2 that can be modified with ifconfig. For example: 1. Set th e MTU of network i[...]

  • Seite 206

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Linux Enviro nment 6-38 FE0254601-00 A Figure 6-28. V erify NIC Driver qlge Figure 6-28 shows the PCI device IDs 85:0 0.0 and 85:00.1 are listed under the qlge section in sysfs. 3. List th e contents o f the soft lin k for the device ID. In Figure 6-29 , f [...]

  • Seite 207

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Linux Environment FE0254601-00 A 6-39 Figure 6-29 shows that the QLogic 8100 Series Adapter NIC functio n at PCI device ID 85:00.0 map s to eth0. QLogic drive r parameters can n ow be displayed and configured through /sy s/class/net/eth0 . Y ou can set net[...]

  • Seite 208

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Linux Enviro nment 6-40 FE0254601-00 A Figure 6-30 shows the sample output for the eth0 interfa ce, associating the driver with the interface and the location of the a dapter hardware on the PCI bus. Figure 6-30. eth0 In terface Sample Output Interrupt Supp[...]

  • Seite 209

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Linux Environment FE0254601-00 A 6-41 Switch Independent Bonding Switch independent teaming is implemented entirely at the adapter-host level. The Ethernet switch that is connecte d to the adapter is unaware of the team, and no switch involvement is requir[...]

  • Seite 210

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Linux Enviro nment 6-42 FE0254601-00 A Ethernet Channel Bonding Driver The Linux bonding driver combines multiple network int erfaces into a single logical bonded interface. The driver support s bonding modes such as failover and round-robin. The bonding dr[...]

  • Seite 211

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Linux Environment FE0254601-00 A 6-43 arp_ip_t arget IP address Sp ecifies the IP addresses to use as ARP monitoring peers when arp_interval is > 0. These are the ta rgets of the ARP request that are sen t to determine th e health of the link to the tar[...]

  • Seite 212

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Linux Enviro nment 6-44 FE0254601-00 A mode Intege r or string S pecifies a bonding policy balance-rr or 0  balance-rr or 0 — Round-rob in policy transmits pa ckets in sequential order from the first available slave through the last. This mode provides[...]

  • Seite 213

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Linux Environment FE0254601-00 A 6-45 Loading the Bonding Driver In most RHEL 5 environments, the bon ding driver is not loaded by de fault. Unless the bonding driver is loaded, bon d inte rfaces using the QLogic adapter NIC function cannot be created. T o[...]

  • Seite 214

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Linux Enviro nment 6-46 FE0254601-00 A If the command produces no output, the bonding driver is already loaded. If the output is similar to Figure 6-32 , the bonding driver has been successfully loaded. Figure 6-32. Loading the Bonding Driver Unloading the [...]

  • Seite 215

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Linux Environment FE0254601-00 A 6-47 2. Lo ad the Linux bonding driver module and specify para meters to be changed. One or more p arameters can be specified sep arated by a space. The following command set s MII link monitoring frequency to 100ms and ena[...]

  • Seite 216

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Linux Enviro nment 6-48 FE0254601-00 A d. Reboot the server for th e new RAMDISK image to ta ke affect by issuing the following command: # shutdown -r now 4. Af ter a successful reboot, verify that the paramet er values parameters h ave changed by issuing t[...]

  • Seite 217

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Linux Environment FE0254601-00 A 6-49 In this command:  bond0 is the bonding interface created by the ifconfig command in St e p 1 .  eth0 and eth1 are the QLogic adapter network int erfaces form a part of this bond. Persistent Bonding Configuration [...]

  • Seite 218

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Linux Enviro nment 6-50 FE0254601-00 A a. Open the file /etc/sysconfig/network-scripts/ifcf g-ethx . For example: # vi /etc/sysconfig/network-scripts/ifcfg-eth0 b. Append the following commands to the file to modify the physical interface. MASTER=bond0 SLAV[...]

  • Seite 219

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Linux Environment FE0254601-00 A 6-51 2. Enter the ifconfig comma nd, and examine the output. Figure 6-34 shows that the bond0 interface st atus and IP address information. Th e MAC addresses for the two bonde d ports (eth0 an d eth1) are the same. Af ter [...]

  • Seite 220

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Linux Enviro nment 6-52 FE0254601-00 A VLAN Configuration A virtual LAN (VLAN) is a logical gro uping of network host s connected to a switch to achieve a logical se gmentation of a ph ysical network. By default, all switches make up a broadcast domain in t[...]

  • Seite 221

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Linux Environment FE0254601-00 A 6-53 Loading the VLAN 802.1q Kernel Module In most RHEL 5 environment s, the VLAN 802.1q kernel module is loaded by default. VLAN interfaces cann ot be created over the QLogic adapter NIC function without the VLAN 802.1q ke[...]

  • Seite 222

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Linux Enviro nment 6-54 FE0254601-00 A This section describes nonpersistent and p ersistent configuration of VLAN interfaces over the NIC function usi ng VLAN 802.1q Kernel Mo dule and user space utilities. Nonpersistent configuration ( ifconfig an d vconfi[...]

  • Seite 223

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Linux Environment FE0254601-00 A 6-55 b. Open the VLAN inte rface network configuration script with a n editor , and make the following changes:  Replace the string DEVICE=eth0 with DEVICE=eth0.5 .  Append the string VLAN=yes to t he end of the file.[...]

  • Seite 224

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Linux Enviro nment 6-56 FE0254601-00 A 2. Enter the ifconfig command, and then examine the output . For example: # ifconfig eth0.5 This command shows the eth0.5 VLAN interface st atus, statistics, and IP address. Disabling a VLAN interface T o disable a VLA[...]

  • Seite 225

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Linux Environment FE0254601-00 A 6-57 W ake On LAN W ake on LAN is not supported for QLogic 8100 Series Adapt ers. PXE Boot PXE boot code is a p art of the QLogic 8100 Series Adapter multi-boot image that enables a networked server to boot with the images [...]

  • Seite 226

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Linux Enviro nment 6-58 FE0254601-00 A Figure 6-38. PXE Flow Diagram 1. As the server boot s up, it starts the QLogic adapter PXE bo ot code from the adapter Flash memory . This boot code is part of the multi-boot image that is resident on the QLogic adapte[...]

  • Seite 227

    6–Configuring NIC Fun ctionality in the Converged Ne twork Adapter Configuring the NIC in a Linux Environment FE0254601-00 A 6-59 7. The PXE boot code downloads the executable boot file using TFTP and executes the boot file. Prerequisites for PXE Boot PXE boot requires the following:  A client server with a PXE-compliant BIOS or UEFI implement[...]

  • Seite 228

    6–Configuring NIC Functionality in the Co nverged Network Adapter Configuring the NIC in a Linux Enviro nment 6-60 FE0254601-00 A[...]

  • Seite 229

    FE0254601-00 A 7-1 7 Configuring FCoE in a W indows Environment Overview The QLogic 8100 Series Conve rged Network Adapter is dual-funct ion adapter comprising FCoE and NIC functions. This se ction describes the characteristics, configurations, and features of the FCoE function. Driver Parameters T able 7-1 lists the FCoE parameters, their default [...]

  • Seite 230

    7–Configuring FCoE in a Windows Environm ent Driver Parameters 7-2 FE0254601-00 A S pin-up Delay Ti me that the adapter port waits before scanning the channel for devices. 0 0–2 seconds Fast! UTIL, QCon- vergeConsole GUI, or QConvergeC on- sole CLI Frame Size Maximum length of a Fibre Channel frame created b y the adapter for e ncapsulation in [...]

  • Seite 231

    7–Configuring FCoE in a Windows Environme nt Driver Parameters FE0254601-00 A 7-3 LUNs per T arget Number of LUNs pe r target. Multiple LUN support is typi- cal of RAID boxes that use LUNs to map drives. 128 0, 8, 16, 32, 64, 128, 256 Fast! UTIL, QCon- vergeConsole GUI, or QConvergeC on- sole CLI Enable LIP Full Login Enables or disables the ISP [...]

  • Seite 232

    7–Configuring FCoE in a Windows Environm ent Driver Parameters 7-4 FE0254601-00 A The following para meters af fect adapter FCoE performance:  Operation Mode  Interrupt Delay T imer  Execution Throttle  Frame Size (Fibre Channel) The Execution Throttle and Frame Size Rate p arameters default to their maximum values for optimal FCoE pe[...]

  • Seite 233

    7–Configuring FCoE in a Windows Environme nt N_Port ID Virtualization FE0254601-00 A 7-5 Interrupt Delay T imer (IDT) The Interrupt Delay T imer parameter is available if the Ope ration Mode (ZIO) parameter is enable d. The Interrupt Delay T imer parameter specifies the time period (in 100-microsecond increment s) between updating the response qu[...]

  • Seite 234

    7–Configuring FCoE in a Windows Environm ent N_Port ID Virtual iz ation 7-6 FE0254601-00 A NPIV allows a single physical Fibre Chann el ad apter port to function as multip le logical ports, each with it s own WWPN, as shown in Figure 7-1 . Figure 7-1. N_Port ID V irtualization QLogic CNA NPIV Solution T o complement Microsof t and other server vi[...]

  • Seite 235

    7–Configuring FCoE in a Windows Environme nt N_Port ID Virtualization FE0254601-00 A 7-7  QLogic 8100 Series Adapter driver — QLogic STOR Miniport Driver 9.1.8.17 or later .  QLogic QConvergeConsole GUI , version 1.0.28, or later; or QConver geConsole CLI Build, version 1.0.0, build 46, or later .  Additional Microsof t softwar e compo[...]

  • Seite 236

    7–Configuring FCoE in a Windows Environm ent N_Port ID Virtual iz ation 7-8 FE0254601-00 A Figure 7-2. Select Port to Create a V irtual Port 4. In the Number of vPort to crea te box, select the number of virtual port s you want to create, then click Up date . The Generated WWNs window displays unique WWNs for the selected numbe r of vPorts . The [...]

  • Seite 237

    7–Configuring FCoE in a Windows Environme nt N_Port ID Virtualization FE0254601-00 A 7-9 7. Select Refresh from the Host d rop-down menu and click OK when prompted to refresh the host. V erifying the V irtual Port s Use QConvergeConsole GUI to verify that the vPort has been created: 1. V erify that the vPort is listed in the lef t pane of the QCo[...]

  • Seite 238

    7–Configuring FCoE in a Windows Environm ent N_Port ID Virtual iz ation 7-10 FE0254601-00 A 2. Inspect the switch Fibr e Channel databa se to verify that the vPort has logged into the connected NPIV -enabled FCoE switch. Refer t o the corresponding switch document ation for details. 3. If possible, ve rify that the vPort has logge d in to the sto[...]

  • Seite 239

    7–Configuring FCoE in a Windows Environme nt N_Port ID Virtualization FE0254601-00 A 7-1 1 Figure 7-4. Select V irtual Ports to Delete 5. Click the Delete butto n, located at the bottom of the screen. A dialog box prompts you fo r a password. 6. T ype the administrative password, a nd then click OK . A dialog box appears, asking if you want to re[...]

  • Seite 240

    7–Configuring FCoE in a Windows Environm ent N_Port ID Virtual iz ation 7-12 FE0254601-00 A 3. V erify that none of the LUNs presented to the vPort t hrough the zoned storage array port s are visible to the Microsof t Windows operating system. Check for the absence of these LUNs as disks by n avigating to the Disk Manager through the Device Man a[...]

  • Seite 241

    7–Configuring FCoE in a Windows Environme nt N_Port ID Virtualization FE0254601-00 A 7-13 Implementing Adapter-Based Quality of Service The QLogic 8100 Series Adapter solutio n provides for stan dards-based quality of service (QoS), ensuring high-quality performance for applicat ions that require preferential delivery . The QLogic Qo S solution i[...]

  • Seite 242

    7–Configuring FCoE in a Windows Environm ent N_Port ID Virtual iz ation 7-14 FE0254601-00 A T o modify QoS levels, the configuratio n must meet the following hardware and software requireme nts:  Server operating system : Microsof t Windows 2008  Server support for message signaled interrupt s–extended (MSI-X)  A QLogic 8100 Series Ada[...]

  • Seite 243

    7–Configuring FCoE in a Windows Environme nt Boot from SAN FE0254601-00 A 7-15 Boot from SAN For legacy servers, the most common boot method was to b oot from a direct-attached disk. When booting from a direct-att ached disk, the server BIOS/UEFI locates the SCSI/IDE adapter BIOS, which cont ains instructions that enable the server to determin e [...]

  • Seite 244

    7–Configuring FCoE in a Windows Environm ent Boot from SAN 7-16 FE0254601-00 A  If failover cap abilities are required during boot-from-SAN, multiple QL ogic 8100 Series Adapters are requ ired to create redundant p aths to the boot device. Consult the server manufactur e r ’ s documentation to determine the maximum number of QLogic 8100 Seri[...]

  • Seite 245

    7–Configuring FCoE in a Windows Environme nt Boot from SAN FE0254601-00 A 7-17 Confirm the following:  The adapter port has exclusive access to this LUN.  The LUN host type matches the op erati ng system that is to be inst alled on this LUN. Each server must have its own dedicated boot LUN. T wo servers cannot share the same boot LUN. Boot-[...]

  • Seite 246

    7–Configuring FCoE in a Windows Environm ent Boot from SAN 7-18 FE0254601-00 A Single-Path Configuration A single-path configuratio n is the simplest configuration for boot-from-SAN fo r QLogic 8100 Series Adapters. The single-p ath configuration consists of a single adapter port connected to a converged netwo rking switch (FCoE switch), which is[...]

  • Seite 247

    7–Configuring FCoE in a Windows Environme nt Boot from SAN FE0254601-00 A 7-19 Multip ath T opology Multipath topology provides fault tolerance throu gh redundant SAN component s: two adapter port s, two converged networki ng switches, a nd access to the boot LUNs through two independent st orage array controllers. Figure 7-7 shows the SAN compon[...]

  • Seite 248

    7–Configuring FCoE in a Windows Environm ent Boot from SAN 7-20 FE0254601-00 A Configuring an Adapter to Boot-from-SAN This section describes how to configure a QLogic 8100 Series Adapter to boot the Microsoft Windows o perating system from the SAN. 1. Inst all the QLogic 8100 Series Adapter , and update the firmware, if necessary . For informati[...]

  • Seite 249

    7–Configuring FCoE in a Windows Environme nt Boot from SAN FE0254601-00 A 7-21 i. Press ESC to return to the C onfiguration Settings menu . Select Selectable Boot Settings, and then pre ss Enter . j. Enable the Selecta ble Boot option in the Selectable Boot Settings menu. Move the cursor to the Select able Boot option, and then press ENTER ( Figu[...]

  • Seite 250

    7–Configuring FCoE in a Windows Environm ent Boot from SAN 7-22 FE0254601-00 A 5. Configure the UEFI se rver (Windows Server 2008 only). T o configure a BIOS server , refer to St e p 4 . The boot-from-SAN configuration process for UEFI servers depends on the server make and model. The fo llowing instructions configure the adapter fo r boot-from-S[...]

  • Seite 251

    7–Configuring FCoE in a Windows Environme nt Boot from SAN FE0254601-00 A 7-23 i. Select Show T ranslation, under Information, from the Driver Configuration Main Menu ( Figure 7-9 ). T his option displays the t arget and LUN information. Figure 7-9. Driver C onfiguration Main Menu j. Confirm that the LUN you created in St e p f appears in the lis[...]

  • Seite 252

    7–Configuring FCoE in a Windows Environm ent Boot from SAN 7-24 FE0254601-00 A n. Enable bo th Selective Login and Selective LUN Logins ( Figure 7-10 ). Enabling Selective Logins restrict s the discovery of targets [WWPNs] to what is specified in the dat abase as a boot device. Enabling Selective LUN Logins restrict s the discovery of LUNs to wha[...]

  • Seite 253

    7–Configuring FCoE in a Windows Environme nt Boot from SAN FE0254601-00 A 7-25 7. T o configu re a multipath/loa d-balanced boot-from-SAN configuration : a. Connect th e second adapter port, as shown in Figure 7-7 . b. Modify the storage array configuration to present t he primary and alternate boot LUNs to both storage array controllers. c. Modi[...]

  • Seite 254

    7–Configuring FCoE in a Windows Environm ent Boot from SAN 7-26 FE0254601-00 A[...]

  • Seite 255

    FE0254601-00 A 8-1 8 Configuring FCoE in a Linux Environment Overview The QLogic 8100 Series Conve rged Network Adapter is dual-funct ion adapter comprising FCoE and NIC functions. This se ction describes the characteristics, configurations and features of the QLog ic 8100 Series Adapter FCoE fu nction for Linux. FCoE Driver Parameters for Linux T [...]

  • Seite 256

    8–Configuring FCoE in a Linux Environmen t FCoE Driver Parameters for Linux 8-2 FE0254601-00 A ql2xextended_ error_l ogging Enables or disables the dr iver to print verbose logging infor- mation. 0 0 — Disable 1—E n a b l e modprobe, sysfs ql2xdevdiscg oldfw En ables or disables d evice dis- covery with golden firmware. 0 0 — Disable 1—E [...]

  • Seite 257

    8–Configuring FCoE in a Linux Enviro nment FCoE Driver Parameters fo r Linux FE0254601-00 A 8-3 Interrupt Delay T imer The time interval, in 100ms increments, betwee n the response queue update an d the interrupt generation. This param eter can be speci- fied only if the Operation Mode parameter is enabled. Other- wise, this parameter is set to z[...]

  • Seite 258

    8–Configuring FCoE in a Linux Environmen t FCoE Driver Parameters for Linux 8-4 FE0254601-00 A Execution throttle Maximum number of com- mands that a port can execu te at one time. When a port reaches its exec ution throttle, the port can ex ecute no new commands until the current command execution is com- plete. 65,535 1–65,5 35 Fast! UTIL, QC[...]

  • Seite 259

    8–Configuring FCoE in a Linux Enviro nment FCoE Driver Parameters fo r Linux FE0254601-00 A 8-5 Enable OoOFR Enables or disab les out-of-ord er frame reassem bly . This parameter reasse mbles out-of-ord er frames as they are received, minimizing network congestion by eliminating the re-transmission of frame s and exchanges. 0 0—D i s a b l e d [...]

  • Seite 260

    8–Configuring FCoE in a Linux Environmen t Configuring Driver Para meters Using modpr obe 8-6 FE0254601-00 A Configuring Driver Parameters Using mod probe The modpro be Linux utility intellige ntly adds or removes a module from the Linux kernel, and is available with RHEL 5. Adap ter driver pa rameter modifications that you make with modprobe req[...]

  • Seite 261

    8–Configuring FCoE in a Linux Enviro nment Configuring Driv er Parameters Using mod probe FE0254601-00 A 8-7 2. Lo ad the QLogic FCoE driver mo dule, and specify one or more parameters separated by a spa ce. The following example enables MSI-X and Extended Error Logging: # modprobe –v qla2xxx ql2xenablemsix =1 ql2xextended_error_logging=1 3. V [...]

  • Seite 262

    8–Configuring FCoE in a Linux Environmen t Configuring Driver Parameters Using sysfs 8-8 FE0254601-00 A 3. Save and exit the file etc/modprobe.conf . 4. Create a new RAMDISK ( ini trd image): a. Chang e to the directory that cont ains the RAMDISK images by issu ing the following command: # cd /boot b. Create a backup copy of the RAMDISK ( initrd [...]

  • Seite 263

    8–Configuring FCoE in a Linux Enviro nment Configuring FCoE Paramete rs Using QLogic Utilities FE0254601-00 A 8-9 T o modify FCoE driver parameters using sysfs : 1. Chang e to the sysfs location where the driver p arameter resides by issuing the following command: # cd /sys/module/qla2xxx/parameters 2. Modify the sysfs entry for the corresponding[...]

  • Seite 264

    8–Configuring FCoE in a Linux Environmen t Configuring FCoE Paramete rs Using QLogic Utilities 8-10 FE0254601-00 A Configuring FCoE Driver Parameters Using QConvergeConsole For information about inst alling and launching th e QConvergeConsole GUI, refer to “Management T ool Inst allation” on page 4-26 . Y ou can configure most of the adapt er[...]

  • Seite 265

    8–Configuring FCoE in a Linux Enviro nment Configuring FCoE Paramete rs Using QLogic Utilities FE0254601-00 A 8-1 1 T o configure a p arameter from the list of HBA p arameters: 1. Exp and the port number in the system tree (left pa ne) of the QConvergeConsole browser window . 2. Click the FCoE port node . 3. Click the Parameters t ab in the right[...]

  • Seite 266

    8–Configuring FCoE in a Linux Environmen t Configuring FCoE Paramete rs Using QLogic Utilities 8-12 FE0254601-00 A T o configure a p arameter from the list of advanced HBA p arameters: 1. Exp and the port number in the system tree (left pa ne) of the QConvergeConsole browser window . 2. Click the FCoE port node . 3. Click the Parameters t ab in t[...]

  • Seite 267

    8–Configuring FCoE in a Linux Enviro nment Configuring FCoE Paramete rs Using QLogic Utilities FE0254601-00 A 8-13 T o configure FCoE configuration settings using Fast! UTIL: 1. Select the Select Hos t Adapter option. 2. Select Confi guration Settings . 3. Select Adapter Settings , a s shown in Figure 8-4 . Figure 8-4. Fast! UTIL Adapter Settings[...]

  • Seite 268

    8–Configuring FCoE in a Linux Environmen t Configuring FCoE Paramete rs Using QLogic Utilities 8-14 FE0254601-00 A Figure 8-5. Fast!UTIL Advanced Adapter Settings Displaying FCoE Driver Parameters Using sysfs T able 8-6 lists the FCoE driver p arameters and sysfs locations by which you can display parameter values using sysfs. For information abo[...]

  • Seite 269

    8–Configuring FCoE in a Linux Enviro nment Configuring FCoE Paramete rs Using QLogic Utilities FE0254601-00 A 8-15 T able 8-6. sysfs FCoE Driver Parameters and File Locations Sysfs Location Parameters Description /sys/mod- ule/qla2xxx/parame- ters ql2xallocfwdump ql2xdevdiscgoldfw ql2xenablemsix ql2xetse nable ql2xextended_error _logging ql2xfdmi[...]

  • Seite 270

    8–Configuring FCoE in a Linux Environmen t Configuring FCoE Paramete rs Using QLogic Utilities 8-16 FE0254601-00 A /sys/class/fc_host/h ost X / subsystem -> Link to the base subsystem class supported_classes Fibre C hannel service class supported by the adapter supported_speeds Link speeds supported by th e adapter (10Gb) symbolic_name S tring[...]

  • Seite 271

    8–Configuring FCoE in a Linux Enviro nment Configuring FCoE Paramete rs Using QLogic Utilities FE0254601-00 A 8-17 /sys/class/fc_host/h ost X /statistics loss_of_sync_count Number of ti mes synchronization is lost nos_count Not operational primitive sequence (NOS) count. This primitive sequence is used during link initialization between two N_Por[...]

  • Seite 272

    8–Configuring FCoE in a Linux Environmen t Configuring FCoE Paramete rs Using QLogic Utilities 8-18 FE0254601-00 A /sys/class/scsi_host /host X / fw_state Firmware st ate fw_version FCoE firmw are version isp_id Unused isp_name QLogic adapter ASIC model nu mber identifier max_npiv_vports Maximum number of NPIV port s that are allowed per phys ica[...]

  • Seite 273

    8–Configuring FCoE in a Linux Enviro nment Configuring FCoE Paramete rs Using QLogic Utilities FE0254601-00 A 8-19 Identifying the SCSI Host ID T o identify the SCSI host ID: 1. List the PCIe bus and search fo r the QLogic devices. For example: # lspci | grep “QLogic Corp” 2. Locate the QLogic 8100 Series Adapter entries in the search list ( [...]

  • Seite 274

    8–Configuring FCoE in a Linux Environmen t Configuring FCoE Paramete rs Using QLogic Utilities 8-20 FE0254601-00 A Figure 8-6. Locat ing QLogic 8100 Adapter PCI Devices Figure 8-6 shows PCI bus device IDs 85:00.2 and 85:00.3 for the two F CoE adapter ports. 3. Search the qla2 xxx driver to verify th at the driver is man aging the PCI bus device I[...]

  • Seite 275

    8–Configuring FCoE in a Linux Enviro nment Online S torage Configuratio n and Reconfiguration FE0254601-00 A 8-21 Figure 8-8. Identifyi ng the SCSI Host ID Figure 8-8 shows that the QLogic 8100 Series Adapter FCoE function at PCI device ID 85:00.2 map s to host6. QLogic driver p arameters can now be configured using /sys/class/scsi_host/ host6 an[...]

  • Seite 276

    8–Configuring FCoE in a Linux Environmen t Adapter FCoE Performance Tuning 8-22 FE0254601-00 A Adapter FCoE Performance T uning The following FCoE driver p arameters affect adapter performance:  Operation Mode  Interrupt Delay T imer  Execution Throttle  Frame Size (Fibre Channel)  Queue Depth The default values for Frame Size a nd[...]

  • Seite 277

    8–Configuring FCoE in a Linux Enviro nment N_Port ID Virtualization FE0254601-00 A 8-23 Queue Depth (qla2xmaxqdepth) The Queue Depth p arameter specifies the maximum number of SCSI command buffers that a n adapter port can allocate . This parameter de termines the maximum number of outst anding commands that can execute on any one adapter port. T[...]

  • Seite 278

    8–Configuring FCoE in a Linux Environmen t N_Port ID Virtual iz ation 8-24 FE0254601-00 A Figure 8-9. N_Port ID V irtualization QLogic CNA NPIV Solution T o complement Linux server virt ualization software solutions, QLogic has extended virtualization cap abilities to the adapter hardware through NPIV . All QLogic 8100 Series Adapters support NPI[...]

  • Seite 279

    8–Configuring FCoE in a Linux Enviro nment N_Port ID Virtualization FE0254601-00 A 8-25  A QLogic 8100 Series Adapter FCoE driver — qla2xxx, latest version.  QLogic 8100 Series Adapter FCoE firmware — the FCoE firmware is bundled with the multi boot image. Use the latest version. Creating V irtual Port s This subsection describes how to[...]

  • Seite 280

    8–Configuring FCoE in a Linux Environmen t N_Port ID Virtual iz ation 8-26 FE0254601-00 A 4. T o benefit fro m I/O segregation and NPIV monitoring af ter creating a virtual port, configure zoning o n the FCoE switch, and configure selective LUN presentation on the Fibre Channel or FCoE ta rget array . For information about configuring the FCoE sw[...]

  • Seite 281

    8–Configuring FCoE in a Linux Enviro nment N_Port ID Virtualization FE0254601-00 A 8-27 Figure 8-10. Displaying All V irtua l Ports for Physical Port h ost4 T o verify the state of the virtual port, issue the following comma nd, where X is the physical port SCSI host ID: # cat /sys/class/scsi_host/host X /vport_state Deleting V irtual Port s T o [...]

  • Seite 282

    8–Configuring FCoE in a Linux Environmen t N_Port ID Virtual iz ation 8-28 FE0254601-00 A T o disable a virtual port, issue the following command, where X is th e port SCSI host ID: # echo 1 > /sys/class/scsi_host/hostX/vport_disable T o verify that the virtual adapte r port has been deleted:  Confirm that the sysfs entry fo r the virtual p[...]

  • Seite 283

    8–Configuring FCoE in a Linux Enviro nment Boot-from-SAN FE0254601-00 A 8-29 Figure 8-1 1. Comparing NPIV Physical and V irtual Ports Boot-from-SAN For legacy servers, the most common boot method was to b oot from a direct-attached disk. When booting from direct-att ached disk, the server BIOS/UEFI locates the SCSI/IDE adapter BIOS, which cont ai[...]

  • Seite 284

    8–Configuring FCoE in a Linux Environmen t Boot-from-SAN 8-30 FE0254601-00 A Because the boot device resides on th e SAN, it simp lifies server management. Separating the boot image from each server allows administrators to leverage the advanced capabilities of storag e arrays to achieve high availabilit y , improved data integrity , rapid provis[...]

  • Seite 285

    8–Configuring FCoE in a Linux Enviro nment Boot-from-SAN FE0254601-00 A 8-31  Set the boot order in the system BIOS configuration menu: first, t he optical drive, then the disk, and then the SAN-boot device. Placing the optical drive at the top of the boot order ena bles the server to boot from an RHEL 5 installation media, and then inst all t[...]

  • Seite 286

    8–Configuring FCoE in a Linux Environmen t Boot-from-SAN 8-32 FE0254601-00 A Storage Array Requirement s Some storage arrays cannot support boot-fro m-SAN for specific environments. Consult the storage array document ation to confirm that the array and the firmware support boot-from-SAN. Consider the st orage array and any limit ations regarding [...]

  • Seite 287

    8–Configuring FCoE in a Linux Enviro nment Boot-from-SAN FE0254601-00 A 8-33 Figure 8-12. Single-Path T opology Multip ath T opology The multipath topology provides fault tolerance through redundant SAN components: t wo adapter port s, two converged networking switches, and access to the boot LUNs through two independen t storage array controller[...]

  • Seite 288

    8–Configuring FCoE in a Linux Environmen t Boot-from-SAN 8-34 FE0254601-00 A Figure 8-13. Multipath T opology Converged Networking Switch 1 Storage Array Server Controller A CNA Port 1 LUN 1 (Primary Boot Device) LUN 3 (Alternate Boot Device) LUN 2 (Alternate Boot Device) LUN 4 (Alternate Boot Device) CNA Port 2 Converged Networking Switch 2 Cont[...]

  • Seite 289

    8–Configuring FCoE in a Linux Enviro nment Boot-from-SAN FE0254601-00 A 8-35 Configuring an Adapter to Boot-from-SAN This section describes how to configure a QLogic 8100 Series Adapter to boot the RHEL 5 operating system from the SAN. 1. Inst all the QLogic 8100 Series Adapter , and update the firmware, if necessary . For information about up da[...]

  • Seite 290

    8–Configuring FCoE in a Linux Environmen t Boot-from-SAN 8-36 FE0254601-00 A h. Press ESC to return to th e Configuration Settings menu. Select Selectable Boot Settings , and then press ENTER . i. Enable the Selectable Boot option in the Selectable Boot Settings menu. Move the cursor to the Select able Boot option, and then press ENTER ( Figure 8[...]

  • Seite 291

    8–Configuring FCoE in a Linux Enviro nment Boot-from-SAN FE0254601-00 A 8-37 5. Configure t he UEFI server . T o configure a BIOS server , refer to St e p 4 . The boot-from-SAN configuration process for UEFI servers depends on th e server make and model. The following instructions configure the adapter for boot-from-SAN using the EFI shell. If a [...]

  • Seite 292

    8–Configuring FCoE in a Linux Environmen t Boot-from-SAN 8-38 FE0254601-00 A i. Select Show Translation , under Inf ormation, from the Driver Configuration Main Menu ( Figure 8-15 ). This option displa ys the t arget and LUN information. Figure 8-15. Driver Co nfiguration Main Menu j. Confirm that the LUN you created in St e p f appears in the li[...]

  • Seite 293

    8–Configuring FCoE in a Linux Enviro nment Boot-from-SAN FE0254601-00 A 8-39 n. Enab le both Selective Login and Sel ective LUN Logins ( Figure 8-16 ). Enabling Selective Logins restri cts t he discovery of target s to what is specified in the dat abase as a boot device. Enab ling Selective LUN Logins restrict s the discovery of LUNs to what is s[...]

  • Seite 294

    8–Configuring FCoE in a Linux Environmen t Boot-from-SAN 8-40 FE0254601-00 A 9. Set the SAN boot device (QLogic adapter for BIOS; fibre disk for UEFI) at the top of the boot order . 10. T o configure a multipat h/load-balanced boot-from-SAN co nfiguration: a. Connect th e second adapter port, as shown in Figure 8-13 . b. Modify the storage array [...]

  • Seite 295

    8–Configuring FCoE in a Linux Enviro nment Using the QLogic Linux Utilities FE0254601-00 A 8-41 2. On the Adv anced Boot Loader Configura tion screen, select Cha nge Drive Order . Figure 8-18. Select Adva nced Boot Loader Options RHEL 5 Install step2 3. In the Edit Drive Order window , move the entry for the boot LUN up to the first entry , and t[...]

  • Seite 296

    8–Configuring FCoE in a Linux Environmen t Using the QLogic Linux Utilities 8-42 FE0254601-00 A Dynamic TGT -LUN Discovery Utility The Dynamic TGT -LUN Disco very utility is a combination command line/menu interface that performs the following t asks:  Rescans all the QLogic adapters for new LUNs, using sysfs-based (default) or proc-based sca [...]

  • Seite 297

    8–Configuring FCoE in a Linux Enviro nment Using the QLogic Linux Utilities FE0254601-00 A 8-43 Using the Utility This utility has a command lin e interface and a menu interface. Command Line Interface T o start the Dyna mic TGT -LUN Discovery command line interface, issue the following command followed by one or more command line options: # ./ql[...]

  • Seite 298

    8–Configuring FCoE in a Linux Environmen t Using the QLogic Linux Utilities 8-44 FE0254601-00 A Menu Interface T o open the menu interface, and display the ma in menu ( Figure 8-19 ), issue the following command: # ./ql-dynamic-tgt-lun-disc.sh -–interactive Figure 8-19. Dynamic TGT -LUN Discovery Utility Main Menu T able 8-12. TGT -LUN Discover[...]

  • Seite 299

    8–Configuring FCoE in a Linux Enviro nment Using the QLogic Linux Utilities FE0254601-00 A 8-45 T able 8-13 describes the main menu options. T able 8-13. Dynamic TGT -LUN Main Menu Option Description ALL HOSTS SCAN Scan all QLogic adapters in the system, and report new LUNs that are found. ALL HOST SCAN & REFRESH Scan all QLogic adapters in t[...]

  • Seite 300

    8–Configuring FCoE in a Linux Environmen t Using the QLogic Linux Utilities 8-46 FE0254601-00 A HBA Collect Utility The HBA Collect utility creates a compressed file containing debug ging and configuration options from the RHEL 5 hos t. Run this utility when requested by QLogic T echnical Support. The HBA Collect utility collects the following in[...]

  • Seite 301

    8–Configuring FCoE in a Linux Enviro nment Using the QLogic Linux Utilities FE0254601-00 A 8-47 Package Content s T able 8-15 describes the files in the HBA Collect ut ility package. Using the Utility T o create a compressed file cont ai ning debugging and co nfiguration options, issue the following command: # ./ql-hba-collect.sh Figure 8-20 show[...]

  • Seite 302

    8–Configuring FCoE in a Linux Environmen t Using the QLogic Linux Utilities 8-48 FE0254601-00 A FC HBA Snap shot Utility The FC HBA Snapshot u tility displays informa tion about connected QLogic adapters, including the following:  WWPN  Port ID  All QLogic adapters in the system  LUNs  Parameters or options that can be p assed to t[...]

  • Seite 303

    8–Configuring FCoE in a Linux Enviro nment Using the QLogic Linux Utilities FE0254601-00 A 8-49 T able 8-17 describes the FC HBA Snapsh ot utility command line options. T able 8-18 shows a set of t asks that prov ide informatio n about the QLogic Converged Network Adapter and the FC HBA Snap shot utility command that performs each task. T able 8-[...]

  • Seite 304

    8–Configuring FCoE in a Linux Environmen t Using the QLogic Linux Utilities 8-50 FE0254601-00 A FC HBA Change LUN S t ate Utility This utility is a combination command line/men u interface that changes the st ate (online/of fline) of LUNs connected to a QLogic adapter , without rebooting the server . For example, if a SCSI command times out on a [...]

  • Seite 305

    8–Configuring FCoE in a Linux Enviro nment Using the QLogic Linux Utilities FE0254601-00 A 8-51 Command Line Interface T o use the command line interface, type one of the following commands: # ./ql-lun-state-online.sh < host number list > or # ./ql-lun-state-online.sh --all where host number list a list of on e or more SCSI host IDs (delimi[...]

  • Seite 306

    8–Configuring FCoE in a Linux Environmen t Using the QLogic Linux Utilities 8-52 FE0254601-00 A Menu Interface T o open the menu interface, issue the following command: # ./ql-lun-state-online.sh –interactive  If no off line LUNs are found, the menu interface do es not start, t he utility informs you that no of fline LUNs were found, and the[...]

  • Seite 307

    8–Configuring FCoE in a Linux Enviro nment Using the QLogic Linux Utilities FE0254601-00 A 8-53 The Set Device Command T imeout utility can set the timeout value for t arget devices on a selected host, or it can set a common valu e for all devices on all hosts. This utility set s a timeout value for each target port and applies to all LUNs that a[...]

  • Seite 308

    8–Configuring FCoE in a Linux Environmen t Using the QLogic Linux Utilities 8-54 FE0254601-00 A T able 8-23 describes the Set Device Command T imeout utility command options. T able 8-23. Set Device Command Ti meout Utility Co mmand Options Option (Abbreviation) Description <HOST #> QLogic adapter port SCSI host ID (host X ) as identified i[...]

  • Seite 309

    8–Configuring FCoE in a Linux Enviro nment Using the QLogic Linux Utilities FE0254601-00 A 8-55 T able 8-24 lists a set of t asks and the commands that perform them fo r a target device with the following sysfs p ath: /sys/class/scsi_host/host 4 /device/rport-4: 0 -1 In this path, host=4 a nd target=0. T able 8-24. Set Device Command Ti meout Uti[...]

  • Seite 310

    8–Configuring FCoE in a Linux Environmen t Using the QLogic Linux Utilities 8-56 FE0254601-00 A Menu Interface T o open the Set Device Command T imeout utility menu interface, issue the following command to display the menu shown in Fig ure 8-22 : # ./ql-set-cmd-timeout.sh –interactive Figure 8-22. Set Devi ce Command Timeout Utility Main Menu [...]

  • Seite 311

    8–Configuring FCoE in a Linux Enviro nment Using the QLogic Linux Utilities FE0254601-00 A 8-57 Figure 8-23 shows an example of the Select T arget for HostX menu. The actual menu varies depending on the number of t argets that are visible through the QLogic adapter port. Figure 8-23. Select T arget for HostX Menu T able 8-26 describes the Select [...]

  • Seite 312

    8–Configuring FCoE in a Linux Environmen t Using the QLogic Linux Utilities 8-58 FE0254601-00 A T able 8-27 describes the Modify/Displ ay T imeout menu options. T able 8-27. Modify/Displ ay Timeout Menu Options Option Description MODIFY TIMEOUT S pecify the timeout value, in seconds, for the selected tar- get(s). DISPLAY TIMEOUT Display the curre[...]

  • Seite 313

    FE0254601-00 A 9-1 9 Offline Utilities Overview QLogic provides offline adapter configurat ion and Flash program ming u tilities with the adapter multi-boot code for advanced users. The following utilities are available for adapters insta lled in both BIOS and UEFI servers:  Fast!UTIL  EFICFG  FlasUTIL  EFIUTIL The Fast! UTIL and EFICFG[...]

  • Seite 314

    9–Offline Utilities Fast!UTIL 9-2 FE0254601-00 A The QLogic Flash programming utility is a DOS utilit y with command line options. Fast!UTIL The Fast! UTIL utility is for of fline QLogic 810 0 Series Adapters that are inst alled on BIOS servers. Fast! UTIL performs the following tasks:  Configures general and advanced adapter settings, sele ct[...]

  • Seite 315

    9–Offline Utilities Fast!UTIL FE0254601-00 A 9-3 After a few seconds, the system confirms that Fast! UTIL initialization is i n progress. If more than one adapter is inst alled on the server , Fast! UTIL prompts you to select an adapter to configure ( Figure 9-2 ). Figure 9-2. Selecting an Adapter After an adapte r is selected, the Fast! UTIL Opt[...]

  • Seite 316

    9–Offline Utilities Fast!UTIL 9-4 FE0254601-00 A The Fast! UTIL Option s menu presents the followin g options:  Configuration Settings  Scan Fibre Channel Devices  Fibre Disk Utility  Loopback Data T est  Select Host Adapter  Exit Fast!UTIL After you make chang es, the Fast! UTIL utility resta rts the server to put those changes[...]

  • Seite 317

    9–Offline Utilities Fast!UTIL FE0254601-00 A 9-5 T able 9-1 describes the parameters in the Adap ter Settings window . T able 9-1. Adapter Setting Parameters Parameter Description BIOS Address I/O address where the QLogic BIOS code is stored when you st art the Fast! UTIL utility or when the BIOS code is enabled by default. This is the address of[...]

  • Seite 318

    9–Offline Utilities Fast!UTIL 9-6 FE0254601-00 A Select able Boot Settings The Selectable Bo ot Setting option opens the Select able Boot Settings window ( Figure 9-5 ), from which you can select one or more remote Fibre Channe l drives to serve as a boot device. T o preserve boot device spe cifications that you make, you must also enable the Hos[...]

  • Seite 319

    9–Offline Utilities Fast!UTIL FE0254601-00 A 9-7 Selecting the Boot Port Name, Lun p arameter opens the Select Fibre Chann el Device window ( Figure 9-6 ). Y ou can select any of the Fibre Channel devices listed. Figure 9-6. Select Fibre Channel Device Window T able 9-2. Selectable Boot Settings Window Parameters Parameter Description Selectable [...]

  • Seite 320

    9–Offline Utilities Fast!UTIL 9-8 FE0254601-00 A Restore Default Settings The Restore Default Settings option restores the default adapter a nd NVRAM settings. The NVRAM settings are the ada pter settings that were saved the last time NVRAM was updated using the QLogic FlasUTIL utility (option u). If NVRAM has not been updated using the FlasUTIL [...]

  • Seite 321

    9–Offline Utilities Fast!UTIL FE0254601-00 A 9-9 T able 9-3. Advanced Sett ings Window Parameters Parameter Description Execution Throttle The maximum number of commands that can run on one port. When the number of comman ds executing on a port reaches the execution thro ttle value, no new commands can be initiated until the current command finis[...]

  • Seite 322

    9–Offline Utilities Fast!UTIL 9-10 FE0254601-00 A Scan Fibre Channel Devices The Scan Fibre Channel Devices option displays information for all devices on the Fibre Channel loop. This in formation is useful when configu ring the adapter and attached devices and includes the loop ID, vendo r name, product name, and revision. Y ou can also use this[...]

  • Seite 323

    9–Offline Utilities Fast!UTIL FE0254601-00 A 9-1 1 Fibre Disk Utility The Fibre Disk Utility option opens the Disk Utility Options window ( Figure 9-8 ). This window displays information for all devices on th e Fibre Channel loop and provides options to perform disk maintenance function s. The disk maintenance functions include low-level formatti[...]

  • Seite 324

    9–Offline Utilities EFICFG 9-12 FE0254601-00 A Exit Fast!UTIL The Exit Fast!UTIL option closes the Fast! UTIL utility . When prompted , choose to save the changes and rest art the server to put configuration changes in to ef fect. EFICFG The QLogic EFI Driver Configuration protocol displays and modifie s configuration parameters stored in the ada[...]

  • Seite 325

    9–Offline Utilities FlasUTIL FE0254601-00 A 9-13 The Driver Configuration Main Menu will be displayed. Do not redirect the output of the Driver Configuration pr otocol. Redirecting console ou tput may cause failures. For a more detailed description of the EFI comman ds used in this procedure, refer to the EFI shell documenta tion provided wi th y[...]

  • Seite 326

    9–Offline Utilities FlasUTIL 9-14 FE0254601-00 A 4. Boot the server with the QLogic 8100 Series Ad apter using the disk or USB removable drive. 5. Change to th e directory cont aining the multi-boot image on the disk or USB removable drive. Using FlasUTIL The FlasUTIL utility has a command line inte rface and a menu interface. The menu interface [...]

  • Seite 327

    9–Offline Utilities FlasUTIL FE0254601-00 A 9-15 After updating the multi-boot image using FlasUTIL, issue the vpd /a /u command from the multi-boot image directory on the disk or USB removable drive. This command updates the version in formation for the newly inst alled multi-boot image. Inst alling the Multi-boot Image 1. Inst all the FlasUTIL [...]

  • Seite 328

    9–Offline Utilities EFIUTIL 9-16 FE0254601-00 A The script updates the multi-boot im ages for all the QLogic adapters with corresponding multi-boot image version s, as shown in Figure 9-9 . Figure 9-9. FlasUTIL FW Upgrade In Progress 4. When the installation is complete, reboot the system. EFIUTIL The EFIUTIL utility accesses and modifies the con[...]

  • Seite 329

    9–Offline Utilities EFIUTIL FE0254601-00 A 9-17 The utility can run in batch mode or in in teractive mode (CLI mode). The mod e of operation is determined by the number command line p arameters used to start efiutil. If no parame ters are used, EFIUTIL st arts in CLI mode as follows:  T o start the EFIUTIL CLI o n an IA64 system, type the foll[...]

  • Seite 330

    9–Offline Utilities EFIUTIL 9-18 FE0254601-00 A[...]

  • Seite 331

    FE0254601-00 A A-1 A Adapter Port LEDs Figure A-1 shows the QLogic 8100 Series Adapter S torage T raffic and Link/Ethernet T raffic port LEDs. Each port has it s own LEDs.  The S torage T raffic LED indicates th e state of dat a traffic exchanged with the SAN.  The Link/Ethernet T raffic LED indicates the st ate of data traf fic exchanged wit[...]

  • Seite 332

    A–Adapter Port LEDs A-2 FE0254601-00 A T able A-1. Configuration Options for V irtual Ports Link/Ethernet T raffic LED Storage T raffic LED Hardware S tate Off Off Power of f Slow flashing, unison Slow flashing, unison Power on, no link On On Power on, link est ablished, no activity Flashing On Power on, link est ablished, Ethernet activity on ly[...]

  • Seite 333

    FE0254601-00 A B-1 B Cisco Nexus 5000 Series Switch Configuration This appendix describes how to use the swit ch CLI to configure the Cisco Nexus FCoE switch port as a virtual Fibre Channel port . This configuration enab les communication between the Fibre Channel and FCoE devices att ached to the switch. Configuring the Cisco Nexus FCoE sw itch in[...]

  • Seite 334

    B–Cisco Nexus 5000 Series Switch Configuration Enable FCoE on the Switch B-2 FE0254601-00 A Enable FCoE on the Switch T o enable the FCoE function on the switch: 1. Determine whether t he FCoE function is enabled on the switch by issuing the show feature command. In the following example, the FCoE function is disabled. nexusmv1# show feature Feat[...]

  • Seite 335

    B–Cisco Nexus 5000 Series Switch Configuration Create and Configure the VLAN FE0254601-00 A B-3 3. Save the current con figuration to the switch nonvolatile memory , and then exit configuration mode by is suing the following commands: (config)# copy running-config startup-config (config)# exit 4. Reboot the switch by issuing the following command[...]

  • Seite 336

    B–Cisco Nexus 5000 Series Switch Configuration Create and Co nfigure a Virtual Fibr e Channel Inter face B-4 FE0254601-00 A 2. Enable LL DP on the Ethernet interf ace by issuing the following commands: (config-if)# lldp transmit (config-if)# lldp receive 3. Set the PFC mod e for the interface by issuing the following command: (config-if)# priorit[...]

  • Seite 337

    B–Cisco Nexus 5000 Series Switch Configuration V erify that the Adapter Is Logged in to the Switch FE0254601-00 A B-5 V erify that the Adapter Is Logged into the Switch T o verify that the switch has bee n properly configured and t hat the adapter has logged into the switch: 1. List the device s that have logged into the swit ch, and comp are the[...]

  • Seite 338

    B–Cisco Nexus 5000 Series Switch Configuration V erify that the Adapter Is Logged into the Switch B-6 FE0254601-00 A[...]

  • Seite 339

    FE0254601-00 A C-1 C Brocade CEE/FCoE Switch/Blade Configuration This appendix describes how to use the sw itch CLI to configure the Brocade FCoE switch port as a virtual Fibre Channel port . This configuration enab les communication between the Fibre Channel and FCoE devices att ached to the switch. Configuring the Brocade FCoE swit ch involves th[...]

  • Seite 340

    C–Brocade CEE/FCoE Switch/Blade Configuration Enable the Ethernet Switch Service C-2 FE0254601-00 A Enable the Ethernet Switch Service If you have a Brocade 8000 Series FCoE switch, t he Ethernet switch service is enabled by default — proceed to “Create and Con figure FCoE VLAN” on page C-3 . T o enable the Ethernet switch service on the Br[...]

  • Seite 341

    C–Brocade CEE/FCoE Switch/Blade Configuration Create and Configure FCoE VLAN FE0254601-00 A C-3 Create and Configure FCoE VLAN T o create and configure the FCoE VLAN: 1. Enter the CEE management shell, and move to the global configuration mode by issuing the following commands: admin> cmsh # configure terminal admin> cmsh # configure termin[...]

  • Seite 342

    C–Brocade CEE/FCoE Switch/Blade Configuration Create and Configure CEE-MAP C-4 FE0254601-00 A 6. Create VLAN rules by issuing the following commands: swd77(config)# vlan classifier rule 1 proto fcoe encap ethv2 swd77(config)# vlan classifier rule 2 proto fip encap ethv2 7. Create a VLAN classifie r group, and add the rules from the p revious step[...]

  • Seite 343

    C–Brocade CEE/FCoE Switch/Blade Configuration Configure LLDP/DCBX for FCoE FE0254601-00 A C-5 6. V erify the CEE-MAP configuration by issuing t he following command: (config)# do show cee maps CEE Map demo Precedence 1 Priority Group Table 1: Weight 50, PFC Enabled, TrafficClass 3, BW% 40 2: Weight 50, PFC Disabled, TrafficClass 6, BW% 60 15.0: P[...]

  • Seite 344

    C–Brocade CEE/FCoE Switch/Blade Configuration Configure CEE Port C-6 FE0254601-00 A 4. V erify the LLDP/DCBX configuration ( Transmit TLVs ) by issuing the following command: (config)# do show lldp LLDP Global Information system-name: swd77 system-description: Fibre Channel Switch. description: State: Enabled Mode: Receive/Transmit Advertise tran[...]

  • Seite 345

    C–Brocade CEE/FCoE Switch/Blade Configuration V erify that the Adapter is L ogged into the Switch FE0254601-00 A C-7 V erify that the Adapter is Logged into the Switch T o verify that the switch has bee n properly configured and t hat the adapter has logged into the switch: 1. List the device s that have logged into th e switch by issuing the do [...]

  • Seite 346

    C–Brocade CEE/FCoE Switch/Blade Configuration V erify that the Adapter is Logged into the Switch C-8 FE0254601-00 A[...]

  • Seite 347

    [...]

  • Seite 348

    Corporate Headquarters QLogic Corporation 26650 Aliso Viejo Parkway Ali so Viejo, CA 92656 949.389.6000 www .qlogic.com International Office s UK | Ireland | Germany | France | India | Japan | China | Hong Kong | Singapore | T aiwan ©201 1 QLogic Corporation. Specifications are subject to change without notice. All rights reserved worldwide. QLogi[...]