Q-Logic 5800V Bedienungsanleitung

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134

Zur Seite of

Richtige Gebrauchsanleitung

Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung Q-Logic 5800V an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von Q-Logic 5800V, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.

Was ist eine Gebrauchsanleitung?

Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung Q-Logic 5800V die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.

Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung Q-Logic 5800V. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.

Was sollte also eine ideale Gebrauchsanleitung beinhalten?

Die Gebrauchsanleitung Q-Logic 5800V sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts Q-Logic 5800V
- Den Namen des Produzenten und das Produktionsjahr des Geräts Q-Logic 5800V
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts Q-Logic 5800V
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen

Warum lesen wir keine Gebrauchsanleitungen?

Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von Q-Logic 5800V zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von Q-Logic 5800V und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service Q-Logic finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von Q-Logic 5800V zu überspringen, wie es bei der Papierform passiert.

Warum sollte man Gebrauchsanleitungen lesen?

In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts Q-Logic 5800V, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.

Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von Q-Logic 5800V widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.

Inhaltsverzeichnis der Gebrauchsanleitungen

  • Seite 1

    59265-02 B Inst allation Guide S t ackable Fibre Channel Switch 5800V Series Firmware V ersion 8.0[...]

  • Seite 2

    ii 59265-02 B Installati on Guide S tackable Fibre Channel Switch 5800V Series Information fu rnished in this manual is believed to be accurate and reliab le. However , QLogic Corporation assumes no responsibility for its use, nor for any infringements of patent s or other rights of third p art ies which may result from its use. QLogic Corporation [...]

  • Seite 3

    59265-02 B iii T able of Content s Preface Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Related Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x What’s New in this Release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

  • Seite 4

    iv 59265-02 B Installati on Guide S tackable Fibre Channel Switch 5800V Series System Fault LED (Amber) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Maintenance Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Resetting a Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

  • Seite 5

    59265-02 B v Installation Guide S tacka ble Fibre Channel Switch 5800V Series T ransparent Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2- 13 Switch Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16 Internet Protocol Support . . . . . . . . . . . . . . . [...]

  • Seite 6

    vi 59265-02 B Installati on Guide S tackable Fibre Channel Switch 5800V Series 4 Diagnostics/T roubleshooting Chassis Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Input Power LED Is Not Lit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 System Fault LED Is Lit . . . . .[...]

  • Seite 7

    59265-02 B vii Installation Guide S tacka ble Fibre Channel Switch 5800V Series Glossary Index List of Figures Figure Page 1-1 QLogic 5802V S tackable Fibre Channel Swit ch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 1-2 Chassis LEDs and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1[...]

  • Seite 8

    viii 59265-02 B Installati on Guide S tackable Fibre Channel Switch 5800V Series List of T ables T able Page 1-1 Fibre Channel Port T ypes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 1-2 Serial Port Pin Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

  • Seite 9

    59265-02 B ix Preface This guide describes the feature s and installation of the QLog ic ® 5800V Series S tackable Fibre Channel switch, firmware version 8.0. The QLogic 5800V Series switch is a 24-port, 8Gbp s Fibre Channel switch. The model 5802V switch has dual, replaceable power supplies; the model 5800V switch has a single, non-replaceable po[...]

  • Seite 10

    Preface Related Materials x 59265-02 B Related Materials The following materials are referenced in the text o r provide additional information.  QLogic 5800V Series Fibre Channel Switch Command Line Interface Guide  QLogic Fibre Channel Switch CLI Quick Reference Guide  QLogic 5800V Series Enterprise Fabric Suite User’s Guide  QLogic [...]

  • Seite 11

    Preface Safety Notices 59265-02 B xi Safety Notices A Wa r n i n g notice indicates the presence of a hazard that has the potential of causing personal injury . The following p ages contain warnings: 3-4 , 3-9 A Caution notice indicates the presence of a hazard th at has the potential of causing damage to the equipment. The following pages c ont ai[...]

  • Seite 12

    Preface Communications S tatement s xii 59265-02 B Communications S t atement s The following st atements apply to this p roduct. The statement s for other product s intended for use with this product appear in their accomp anying manuals. Federal Communications Commission (FCC) Class A S t atement This equipment has been tested and fou nd to compl[...]

  • Seite 13

    Preface Communications S tatements 59265-02 B xiii CE S t atement The CE symbol on the equipment indica tes that this system complies with the EMC (Electromagnetic Comp atibility) directive of the European Community (2004/108/EC) and to the Low V oltage (Safety) Directive (2006/95/EC). Such marking indicates that this system meet s or exceeds the f[...]

  • Seite 14

    Preface Laser Safe ty Information xiv 59265-02 B Laser Safety Information This product uses Class 1 laser optical tr ansceive rs to communicate over the fiber optic conductors. The U.S. Depa rtment of Health and Human Services (DHHS) does not consider Class 1 lasers to be hazardous. The International Electrotechnical Commission (IEC) 825 Lase r Saf[...]

  • Seite 15

    Preface Pièces Accessibles 59265-02 B xv Pièces Accessibles Les pièces remplaçables , Field Replaceable Unit s (FRU), du commut ateur QLogic 5800V Series Fibre Channel Switch sont le s suivantes:  Alimentations de courant  Interfaces aux media d’in terconnexion appelés SFP transceivers  Interfaces aux media d’in terconnexion appel[...]

  • Seite 16

    Preface General Public License xvi 59265-02 B General Public License QLogic Fibre Channel switches are power ed by the Linux operating system. A machine-readable copy of th e Linux source code is avai lable upon written request to the following address. A nominal fee wi ll be charged for reproduction, sh ipping, and handling cost s in accordance wi[...]

  • Seite 17

    Preface General Public License 59265-02 B xvii We protect you r rights with two steps: (1) copyr ight the sof tware, and (2) of fer you this license which gives you legal permission to co py , distribute and/or modify the software. Also, for each author's protection an d ours, we want to make certain that everyone underst ands that there is no[...]

  • Seite 18

    Preface General Public License xviii 59265-02 B 3. Y ou may modify your copy or copies of the Program or any po rtion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided tha t you also meet all of these conditions: a. Y ou must cause the modified files to c[...]

  • Seite 19

    Preface General Public License 59265-02 B xix and 2 above on a medium customarily used f or software interchange; or , b. Accompany it with a written o ffer , valid for at least three ye ars, to give any third party , for a charge no more than your cost of physically performing source distribution, a comple te machine-readable copy of the correspon[...]

  • Seite 20

    Preface General Public License xx 59265-02 B 7. Each time you redistribute the Progr am (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy , distribute or modify the Program subject to these terms and conditions. Y ou may not impose any furth er restrictions on the recipien ts'[...]

  • Seite 21

    Preface General Public License 59265-02 B xxi 1 1. Each version is given a distingui shing version number . If the Program specifies a version number of this Lic ense which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free S[...]

  • Seite 22

    Preface General Public License xxii 59265-02 B T o do so, attach the following notices to the program. It is safe st to att ach them to the start of each source file to most ef fe ctively convey the exclusion of warranty; and each file should have at le ast the "copyright" line and a pointer to where the full notice is found. one line to [...]

  • Seite 23

    Preface qfsApp Prog ram License 59265-02 B xxiii Y oyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes p asses at co mpilers) written b y Ja mes Ha cker . signature of T y Coon , 1 April 1989 T y Coon, President of V ice This General Public Licens e does not permit incorporating your program into pr[...]

  • Seite 24

    Preface T echnical Support xxiv 59265-02 B T echnical Support Customers should cont act their authorized maintenance provider for technical support of their QLogic product s. QLogic- direct customers may contact QLo gic T echnical Support; others will be redire cted to their authorized maintenance provider . Vi sit the QLogic support Web site liste[...]

  • Seite 25

    Preface T echnical Support 59265-02 B xxv Knowledge Base The QLogic knowledge base is an extensive collection of QLogic product information that you can search for specific solutions. W e are constantly adding to the collection of information in our knowledge base to provide answers to your most urgent questions. Access the knowledge ba se from the[...]

  • Seite 26

    Preface T echnical Support xxvi 59265-02 B[...]

  • Seite 27

    59265-02 B 1-1 1 General Description The QLogic 5800V Series switch, shown in Figure 1-1 , is a 24-port, 8Gbps Fib re Channel switch with both Ethernet and serial management interfaces. The model 5802V has dual, replaceable power supplies; t he model 5800V switch has a single, non-replaceable powe r supply . This section describes the features and [...]

  • Seite 28

    1–General Description Chassis Controls and LEDs 1-2 59265-02 B Y ou can manage fabrics with the CLI, the QuickT ools™ Web applet , or Enterprise Fabric Suite™ (version 7.04).  Refer to the QLogic 5800V Series Fibre Channel Switch Command Line Interface Guide for information abo ut the CLI.  Refer to the QLogic 5800V Series QuickT ools S[...]

  • Seite 29

    1–General Descriptio n Chassis Controls and LEDs 59265-02 B 1-3 Heartbeat LED (Green) The Heartbeat LED indicates the st atus of the internal switch processor and the results of the p ower-on self test (POST). Following a normal power-up, the Heartbeat LED blinks approximately once per secon d to indicate that the switch passed the POST and that [...]

  • Seite 30

    1–General Description Fibre Channel Port s 1-4 59265-02 B Fibre Channel Port s The QLogic 5800V Series switch has 20 Fibre Cha nnel SFP port s and 4 Fibre Channel XP AK ports. SFP ports are numbered 0–19 as shown in Figure 1-3 . Each SFP port is served by an SFP optical transceiver , and is capable of 1, 2, 4, or 8Gbps transmissio n. SFP ports [...]

  • Seite 31

    1–General Descriptio n Fibre Channel Port s 59265-02 B 1-5 Port LEDs Each port has its own Logged-I n LED (L) and Activity LED (A) as shown in Figure 1-4 . Figure 1-4. Port LEDs Port Logged-In LED (Green) The Logged-in LED indica tes the logged-in or initialization status of the connected devices. Af ter successful completion of the POST , the sw[...]

  • Seite 32

    1–General Description Fibre Channel Port s 1-6 59265-02 B The SFP and XP AK transceivers are hot-pluggable. This means that you can remove or inst all a transceiver while the switch is o perating without harming the switch or the transceiver . However , co mmunication with the connected device will be interrupted. For more inf ormation about inst[...]

  • Seite 33

    1–General Descriptio n Ethernet Port 59265-02 B 1-7 Ethernet Port The Ethernet port is an RJ-45 connector that provides a connection to a management workst ation through a 10/100 Base-T Ethernet cable as shown in Figure 1-5 . A management workst ation can be a Windows ® , Solaris ® , or a Linux ® workstation that is u sed to configure and mana[...]

  • Seite 34

    1–General Description Serial Port 1-8 59265-02 B Serial Port The QLogic 5800V Series switch is equi pped with an RS-232 serial port for maintenance purposes, as shown in Figure 1-6 . Y ou can manage the switch through the serial port using the CLI. Figure 1-6. Serial Port and Pin Identification The serial port requires a null-modem F/F DB9 cable.[...]

  • Seite 35

    1–General Descriptio n Power Supplies and Fans 59265-02 B 1-9 Power Supplies and Fans The model 5800V switch is equipped with a single, non-replaceable power supply . The model 5802V switch is equipp ed with dual, replaceable powe r supplies. Model 5800V The model 5800V switch has a sing le power supply that convert s 100–240 V AC to DC voltage[...]

  • Seite 36

    1–General Description Switch Management 1-10 59265-02 B Switch Management The switch supports the following management tools:  QuickT ools Web Applet  Enterprise Fabric Suite  Command Line Interface  Application Programming Interface  Simple Network Management Protocol  S torage Management Initiative–S pecification  File T [...]

  • Seite 37

    1–General Descriptio n Switch Management 59265-02 B 1-1 1 Enterprise Fabric Suite Enterprise Fabric Suite is a separately licen sed, workstation-based, Java® application that provides a graphical user interface for fabric and switch management. Enterprise Fabric Suite is b est suited for fabrics of four or more switches, and comes with a 30-day [...]

  • Seite 38

    1–General Description Switch Management 1-12 59265-02 B Simple Network Management Protoc ol SNMP provides monitoring and trap func tion s for the fabric. QLogic firmware supports SNMP versions 1, 2 , and 3, t he Fibre Alliance Management Information Base (F A-MIB) version 4.0, and the Fabric Element Manage ment Information Base (FE-MIB) RFC 2837.[...]

  • Seite 39

    59265-02 B 2-1 2 Planning Consider the following when planning a fabric:  Devices  Device Acce ss  Performance  Feature Licensing  Multiple Chassis Fabrics  Switch Services  Internet Protocol Support  Security  Fabric Management Devices When planning a fabric, consider the number of devices and the anticip ated demand. Th[...]

  • Seite 40

    2–Planning Device Access 2-2 59265-02 B Device Access Consider device access needs within the fabric. Access is co ntrolled through the use of zoning. Some zoning strategies include the f ollowing:  Separate device s by operating system.  Separate device s that have no need to communicate with other devices in the fabric or that have classi[...]

  • Seite 41

    2–Planning Performance 59265-02 B 2-3 Performance The QLogic 5800V Series switch support s class 2 and class 3 Fibre Channel service at transmission rates of 1, 2, 4, 8,10, or 20Gbps with a maximum frame size of 2148 bytes. Each Fibre Channel p ort adapts its t ransmission speed to match that of the device to which it is connected prior to login,[...]

  • Seite 42

    2–Planning Performance 2-4 59265-02 B Extending credit s requires a minimum cable length that is dependent on transmission speed. Extending credit s over short cables can cause excessive port resets. T able 2-3 list s the possible dista nces and minimum cable lengths for a po rt with 30 credits. Bandwid th Bandwidth is a me asure of the amount of[...]

  • Seite 43

    2–Planning Feature Licensing 59265-02 B 2-5 Latency Latency is a measure of how fast a frame travels through a switch from one port to another . The factors that af fect latency include transmission rate and the source and destination port relationship as shown in T able 2-4 . Feature Licensing License keys provide a way to exp and the cap abilit[...]

  • Seite 44

    2–Planning Multiple Chassis Fabrics 2-6 59265-02 B Multiple Chassis Fabrics Connecting switches expa nds the number of available port s for devices. Each switch in the fabric is identified by a unique domain ID, and the fabric can automatically resolve domain ID conflicts. Because the Fibre Channe l ports are self-configuring, you can connect QL [...]

  • Seite 45

    2–Planning Multiple Chassis Fabrics 59265-02 B 2-7 Domain ID, Princip al Priority , and Domain ID Lock The following switch configuration settings affect multiple chassis fab rics:  Domain ID  Principal priority  Domain ID lock The domain ID is a unique number (1 –239) that identifies each switch in a fabric. The principal priority is [...]

  • Seite 46

    2–Planning Multiple Chassis Fabrics 2-8 59265-02 B S t acking Y ou can connect up to six QLogic 5800V Series switches through the XP AK ports, thus preserving the SFP port s for devices. This is called sta cking . The following 2-, 3-, 4-, 5-, and 6-switch st acking configurations are reco mmended for best performance and redundancy . Each XP AK [...]

  • Seite 47

    2–Planning Multiple Chassis Fabrics 59265-02 B 2-9 Figure 2-3 shows a four-switch stack of model 58 00V Series switches using three 3-inch and three 9-inch XP AK switch stacking cables. Eighty SFP port s are available for devices. Figure 2-3. Four -Switch S t ack Figure 2-4 shows a five-switch st ack of model 5800V Series switches using four 3-in[...]

  • Seite 48

    2–Planning Multiple Chassis Fabrics 2-10 59265-02 B Figure 2-5 shows a six-switch stack of model 5800V Series switches using two 3-inch and six 9-inch XP AK switch stacking cables. One hundre d twenty SFP ports are available for de vices. Figure 2-5. Si x Switch S tack Common T opologies Although QLogic recommen ds using the XP AK stacking port s[...]

  • Seite 49

    2–Planning Multiple Chassis Fabrics 59265-02 B 2-1 1 Cascade T opology A cascade topology describes a fab ric in which the switches are connected in series. If you connect the last switch ba ck to the f irst switch, you create a cascade-with-a-loop topology as shown in Figure 2-6 . The loop re duces latency because any switch can route traf fic i[...]

  • Seite 50

    2–Planning Multiple Chassis Fabrics 2-12 59265-02 B Mesh T opology A mesh topology describes a fabric in wh ich each chassis has at least one port directly connected to each other chassis in the fabric. Using 24 -port QLogic 5800V Series switches, the mesh fabric shown in Fig ure 2-7 has the following characteristics:  Each link contributes up[...]

  • Seite 51

    2–Planning Multiple Chassis Fabrics 59265-02 B 2-13 MultiSt age T o pology A Multistage topolo gy describes a fabric in which two or more edge switches connect to one or more core switches. Using 24-port QLogic 5 800V Series switches, the Multist age fabric shown in Figure 2-8 has the following characteristics:  Each link contributes up to 850[...]

  • Seite 52

    2–Planning Multiple Chassis Fabrics 2-14 59265-02 B Y ou can configure transparent routing usi ng QuickT ools, Enterprise Fabric Suite, or the CLI. However , only QuickT ools and Enterprise Fabric Suite validate your entries, manage the zone ma pping for the local fabric, and create a list o f zoning commands that can be run in a script on an Bro[...]

  • Seite 53

    2–Planning Multiple Chassis Fabrics 59265-02 B 2-15  Because Cisco switches do not support the Unzoned Name Server , Cisco fabrics must be “pre-zoned” before you can set up TR mappings to a remote Cisco fabric using the TR Mapping Manager dialog box. The Cisco fabric zone set must be changed to add zone s so that the WWNs of the remote dev[...]

  • Seite 54

    2–Planning Switch Services 2-16 59265-02 B The name of the inter-fabric zone be gins with IFZ followed by the lowest device port WWN followed by the remaining port WW N, all uppercase, separated by un derscores (_). For exam ple, consider the following local an d remote device WW Ns:  Local device: 21:00:00:e0:8b:0e:d3:59  Remote device: 22[...]

  • Seite 55

    2–Planning Switch Services 59265-02 B 2-17  Secure Socket Layer (SSL) : Provides secure connection s for Enterprise Fabric Suite, the QuickT ools W eb applet, the API, and SMI-S. This se rvice must be enabled to authenticate u sers through a remote authentication dial in-user service (RADIUS) server when using En terprise Fabric Suite. T o ena[...]

  • Seite 56

    2–Planning Internet Protocol Support 2-18 59265-02 B Internet Protocol Support The switch supports IP version 4 (IPV4), IP version 6 (IPV6), and DNS host names. IPV4 and IPV6 are enabled by default. Consider your IP version requirements a nd the availability of a DNS server . Security Security is available at the following levels:  User Accoun[...]

  • Seite 57

    2–Planning Securit y 59265-02 B 2-19 IP Security IP security provides encryption-b ased security for IPv4 and IPv6 communications through policies and associations. Policies defin e security for host-to-host and host-to-gateway connections; one policy fo r each direction. For example, to secure the connection between two host s, you need two poli[...]

  • Seite 58

    2–Planning Security 2-20 59265-02 B Connection Security Connection security provides an encry pted dat a path for switch manag ement methods. The switch supports the SSH protocol for the command line interface and the SSL protocol for manageme nt applications such as Enterprise Fabric Suite and SMI-S. The SSL handshake process between the work st[...]

  • Seite 59

    2–Planning Securit y 59265-02 B 2-21 In addition to authorization, you can configure the switch to require authentication to validate the identity of the connecting switch, de vice, or host. Authentication can be performed locally using the switch’ s security dat abase, or remotely using a RADIUS server such as Microsoft RADIUS . With a RADIUS [...]

  • Seite 60

    2–Planning Security 2-22 59265-02 B Security Example: Switches and Adapters with Authentication Consider the fabric shown in Figure 2-9 . In th is fabric, Switch_1, Adapter_1, and Switch_2 support authentication, whil e the JBOD and Adapter_2 do not. The objective is to secure F_Ports and E_Port s in the fabric. Figure 2-9. Security Exam ple: Swi[...]

  • Seite 61

    2–Planning Securit y 59265-02 B 2-23 T o secure F_Ports and E_Port s in the fabric, configure security on the devices th at support security: Switch_1, Switch_2, and Adapter_1: 1. Create a security set (Security_Set_1) on Switch_1. a. Create a port group (Group_Port_1) in Security_Set_1 with Switch_1, Adapter_1, and JBOD as members, as shown in t[...]

  • Seite 62

    2–Planning Security 2-24 59265-02 B b. Create an ISL group (Group_ISL_1) in Security_ Set_1 with Switch_1, Switch_2, Adapter_1, and JBOD as members, as shown in th e following table: The Switch_1 secret must be shared with the Switch_2 database. 2. Configure security on Adapter_1 using the appropriate managemen t tool. Logins between the Switch_1[...]

  • Seite 63

    2–Planning Securit y 59265-02 B 2-25 Security Example: RADIUS S erver Consider the fabric shown in Figure 2-10 . This fabric is similar to the one shown in Figure 2-9 with the addition of Radius_1 acti ng as a RADIUS server . Authorization and authentication are p assed from the switch to Radius_1 in the followin g cases:  Adapter_1 log in to [...]

  • Seite 64

    2–Planning Security 2-26 59265-02 B T o secure F_Ports and E_Port s, and pass authoriza tion and authentication to a RADIUS server: 1. Configure the Radius_1 host as a RADIUS se rver on Switch_1 and Switch_2 to authenticate device logins , as shown in the following table: S pecify the server IP address and the secret with which the switches will [...]

  • Seite 65

    2–Planning Securit y 59265-02 B 2-27 Observe the following rules:  Switch_1 and all devices and switches connected to Switch_1 must be included in the group even if the switch or device does not support authentication. Otherwise, the Switch _1 port will become isolated from the fabric.  Y ou must specify adapters by node WWN. Switches can b[...]

  • Seite 66

    2–Planning Security 2-28 59265-02 B 5. Create a security set (Security_Set_2) on Switch_2. Create an ISL group (Group_ISL_2) in Security_ Set_2 with Switch_1 and Switch_2 as members, as shown in the following: 6. Save and activate Security_Set_2 on Switch_2 . Switch_2 Node WWN: 10:00:00:c0:dd:07:e3:4e Authentication : CHAP Primary Hash: MD5 Prima[...]

  • Seite 67

    2–Planning Securit y 59265-02 B 2-29 Security Example: Host Authentication Consider the fabric shown in Figure 2-1 1 . In this fabric, only Switch_2 and Adapter_2/APP_2 support security , wher e APP_2 is a host application. The objective is to secure the management server on Switch_2 from unauth orized access by an adapter or an associated h ost [...]

  • Seite 68

    2–Planning Security 2-30 59265-02 B T o secure the management server on Switch_2 from u nauthorized access by an adapter or an associated host application: 1. Create a security set (Security_Set_2) on Switch_2. 2. Create a management server group (Group_1) in Secu rity_Set_2 with Switch_2 and Adapter_2 or APP_2 as it s member . Y ou must specify [...]

  • Seite 69

    2–Planning Fabric Manageme nt 59265-02 B 2-31 Fabric Management The Enterprise Fabric Suite application ru ns on a management workst ation and provides for the configuration, control, and maintenance of multiple fabrics. Supported plat forms include Windows, So laris, Linux, and Mac OS X. Enterprise Fabric Suite comes with a 30-day trial license?[...]

  • Seite 70

    2–Planning Fabric Managem ent 2-32 59265-02 B[...]

  • Seite 71

    59265-02 B 3-1 3 Inst allation This section describes how to inst all and configure the switch. The following topics are covered:  Site Requirement s  Installing a Switch  Installing Firmware  Adding a Switch to an Existing Fabric  Installing Feature L icense Keys Site Requirement s Consider the following items when in stalling a QLo[...]

  • Seite 72

    3–Installation Site Requirement s 3-2 59265-02 B Fabric Management W orkst ation The requirements for fa bric managem ent workstations are described in Ta b l e 3 - 1 . T elnet workstations require an RJ-45 Ethernet port or an RS-232 serial port, and an operating system with a T elnet client. Switch Power Requirement s Power requirements a re 1.2[...]

  • Seite 73

    3–Installation Installing a Switch 59265-02 B 3-3 Inst alling a Switch Unpack the switch and accessories. The QLogic 5800V Series product is shipped with the component s shown in Figure 3-1 :  QLogic 5800V Series Fibre Channel sw itch (1) with firmware inst alled  Power cord (1)—model 5800V  Power cords (2)—model 5802V  Rubber fee[...]

  • Seite 74

    3–Installation Installing a Switch 3-4 59265-02 B Installing a QLogic 5800V Series switch involves the following steps: 1. Mount the Switch 2. Install the T ransceivers 3. Configure the Wo rkstation 4. Connect the Switch to AC Power 5. Connect the W orkstation to the Switch 6. Configure the Switch 7. Cable Devices to the Switch Mount the Switch T[...]

  • Seite 75

    3–Installation Installing a Switch 59265-02 B 3-5 Inst all the T ransceivers The switch supports a variety of SFP and XP AK transceivers. T o install a transceiver , insert the transceiver into the port, and then gently press until it snaps in place. T o remove a transceiver , gently press the transceiver int o the port to release the tension, pu[...]

  • Seite 76

    3–Installation Installing a Switch 3-6 59265-02 B If you are using the XP AK ports, remove the port cove rs, as shown in Figure 3-2 . Figure 3-2. Removing XP AK Port Covers T o install XP AK switch stacking ca bles, position the cable c onnectors with the circuit board toward the mid-line of the re spective switch faceplates, as shown in Figure 3[...]

  • Seite 77

    3–Installation Installing a Switch 59265-02 B 3-7 Configure the W orkst ation If you plan to use the CLI to configure and manage the switch, you must config ure the workstation. T o configure the workstation, set the worksta tion IP address for Ethernet connections, or configure the workst ation serial port. If you plan to use QuickT ools or Ente[...]

  • Seite 78

    3–Installation Installing a Switch 3-8 59265-02 B Configuring the Work st ation Serial Port T o configure the workstation se rial port: 1. Connect a null mo dem F/F DB9 cable from a COM po rt on the management workstation to the RS-232 serial port on the switch. 2. Configure the workstation serial port according to your platform:  For Windows:[...]

  • Seite 79

    3–Installation Installing a Switch 59265-02 B 3-9 Connect the Switch to AC Power W ARNING!! This product is supplied with a three-wire power cable and plug for the user ’s safety ( Ta b l e A - 1 ). Use this power ca ble in conjunction with a grounded outlet to avoid electrical shock. An electrical outlet that is not correctly wired could place[...]

  • Seite 80

    3–Installation Installing a Switch 3-10 59265-02 B The switch comes with one or two NEMA 5-15, non-lo cking power cords (SKU: CPK-5000-US). This power cord is approved for North America (USA, Canada, Puerto Rico), Mexico, Central America , South America, Korea, T aiwan, Philippines, and Thailand. For informa tion about power cords for other count[...]

  • Seite 81

    3–Installation Installing a Switch 59265-02 B 3-1 1  The Heartbeat LED indicates th e results of the POST . The POST analyzes the condition of firmware, memories, dat a-paths, and switch logic circuitry . If the Heartbeat LED blinks steadily (about once per second), the POST was successful , and you can continue with the installation process. [...]

  • Seite 82

    3–Installation Installing a Switch 3-12 59265-02 B Configure the Switch Y ou can configure the switch using the CLI, QuickT ools, or Enterprise Fabric Suite. Enterprise Fabric Suite is an optional, full fabric graphical user interface that comes with a 30-day trial license. For in formation about installing Enterprise Fabric Suite, refer to t he [...]

  • Seite 83

    3–Installation Installing a Switch 59265-02 B 3-13  Serial—Windows: Open the HyperT erminal applicatio n on a Windows platform. a. Click the Start button, and then select Programs , Accessories , HyperTerminal, and then HyperTerminal . b. Select the connection you created earlier , and then click OK .  Serial—Linux: Open a command windo[...]

  • Seite 84

    3–Installation Installing Firmware 3-14 59265-02 B Inst alling Firmware The switch comes with current firmware inst alled. Y ou can upgrade firmware as new firmware becomes availa ble using the CLI, QuickT ools, or Enterprise Fabric Suite. This guide describes how to inst al l firmware using QuickT ools and the CLI. For information about installi[...]

  • Seite 85

    3–Installation Installing Firmware 59265-02 B 3-15 Using QuickT ools to Inst all Firmware T o install firmware using QuickT ools: 1. In the faceplate display , open the Switch menu and select Load Firm ware . 2. In the Firmware Upload dialog, click Browse , and then select the firmware file to be uploaded. 3. Click Star t to begin the firmware lo[...]

  • Seite 86

    3–Installation Installing Firmware 3-16 59265-02 B  File transfer protocol (FTP or TFTP)  IP address of the remote host  Account name and p assword on the remote host (FTP only)  Pathname for the firmware image file T o install firmware using the CLI when an FTP server is present on the management workst ation, use the Firmware Instal[...]

  • Seite 87

    3–Installation Installing Firmware 59265-02 B 3-17 5. T ype the passwo rd for your acco unt name (FTP only). For example: 331 Password required for johndoe. Password: ****** 230 User johndoe logged in. 6. The firmware will now be downloaded fro m the remote host to the switch, installed, an d activated. Custom Firmware Inst allation A custom firm[...]

  • Seite 88

    3–Installation Adding a Switch to an Existing Fabric 3-18 59265-02 B 4. W ait for following message to appear , indicating that the firmware image is unpacked. image unpack command result: Passed 5. When prompted to reset the switch to activate t he firmware, type the Hotreset command to attempt a non-di srup tive activation. For example: Switch [...]

  • Seite 89

    3–Installation Installing Feature License Keys 59265-02 B 3-19 Inst alling Feature License Keys For information about available license keys, re fer to “Feature Licensing” on page 2-5 . T o install a license key using QuickT ools: 1. Open the Switch Menu and select Fe atures . 2. In the Feature Licenses dialog, click Add . 3. In the Add Licen[...]

  • Seite 90

    3–Installation Installing Feature License Keys 3-20 59265-02 B[...]

  • Seite 91

    59265-02 B 4-1 4 Diagnostics/T roubleshooting Diagnostic information ab out the switch is available through the chassis LEDs and the port LEDs. Diagnostic information is also available through th e CLI, QuickT ools, and Enterprise Fabric Suit e event logs and error displays. This section describes the follo wing types of diagnostics:  Chassis Di[...]

  • Seite 92

    4–Diagnostics/T roubleshooting Chassis Diagnostics 4-2 59265-02 B Input Power LED Is Not Lit The Input Power LED lights up to in dicate that the switch logic circuitry is receiving the correct volt ages. If the Input Power LED is not lit, do the following: 1. Inspect the power cords and connectors. Is the cord unplugged? Is the cord or connector [...]

  • Seite 93

    4–Diagnostics/Troubleshooting Power-On Self T es t Diagnostics 59265-02 B 4-3 Power-On Self T est Diagnostics The POST diagnostic program pe rforms the following tests:  Checksum tests on the boot firmware in PROM and the switch firmware in flash memory  Internal dat a loopback test on all port s  Access and integrity test on the ASI C D[...]

  • Seite 94

    4–Diagnostics/T roubleshooting Power-On Self T est Diagnostic s 4-4 59265-02 B Internal Firmware Fa ilure Blink Pattern An internal firmware failure blink p attern is two blinks followed by a two-second pause. The two-blink e rror pattern indicates that the firmware has failed; the switch must be reset. Moment arily press and release the Maintena[...]

  • Seite 95

    4–Diagnostics/Troubleshooting Power-On Self T es t Diagnostics 59265-02 B 4-5 Configuration File Syst em Error Blink Pattern A configuration file system error blink p attern is four blinks followe d by a two-second pause. The four-blink error patte rn indicates th at a configuration file system error has occurred, and that the configuration file [...]

  • Seite 96

    4–Diagnostics/T roubleshooting Power-On Self T est Diagnostic s 4-6 59265-02 B Over-T emperature Blink Pattern An over-temperature blink pattern is five b links followed by a two-second p ause. The five-blink error p attern indicates that the air temperature inside t he switch has exceeded the failure temperature th reshold. Figure 4-5. Over-T em[...]

  • Seite 97

    4–Diagnostics/Troubleshooting Power-On Self T es t Diagnostics 59265-02 B 4-7 Logged-In LED Indications Port diagnostics are indicated b y the Logged-In LED for SFP and XP AK ports as shown in Figure 4-6 . Figure 4-6. Logged-In LED The Logged-In LED has three ind ications:  Continuous illumination: A device is logged in to the port.  Flashi[...]

  • Seite 98

    4–Diagnostics/T roubleshooting Power-On Self T est Diagnostic s 4-8 59265-02 B E_Port Isolation A Logged-In LED error indication is often the result of E_Port isolation. E_Port isolation can be caused by the following:  Security failure  A port configured as FL_Port is connected t o another switch  Conflicting domain IDs  Conflicting [...]

  • Seite 99

    4–Diagnostics/Troubleshooting Power-On Self T es t Diagnostics 59265-02 B 4-9 4. Compare the RA_T OV and ED_TOV timeout values for all switches in the fabric using the Show Config Switch command, or click the Switch tab and Advanced icon in QuickT ools. Is each timeout va lue the same on every switch?  Y es—Continue.  No—Correct the tim[...]

  • Seite 100

    4–Diagnostics/T roubleshooting Power-On Self T est Diagnostic s 4-10 59265-02 B Excessive Port Errors The switch can monitor a set of port errors and g enerate alarms based on user-defined sample windows and thre sholds. These port e rrors include the following:  Cyclic redundancy check (CRC) errors  Decode errors  ISL connection count ?[...]

  • Seite 101

    4–Diagnostics/Troubleshooting T ransceiver Diagnostics 59265-02 B 4-1 1 2. Reset the port, and then perform an externa l port loopback test to validate the port and the SFP . For information about testing ports, refer to the QLogic 5800V Series Fibre Channel Switch Command Line Interface Guide or the QLogic 5800V Series QuickT ools Switch Managem[...]

  • Seite 102

    4–Diagnostics/T roubleshooting Power Supply Diagnostics 4-12 59265-02 B Power Supply Diagnostics A power supply has a Fault LED (Amber) an d a S tatus LED (Green), as sh own in Figure 4-7 . Model 5802V power supplies are replaceable. Under normal operating conditions, the Power Supply S t atus LED is lit, and the Power Supply Fault LED is not lit[...]

  • Seite 103

    4–Diagnostics/Troubleshooting Recovering a Switch Using Maintenance Mode 59265-02 B 4-13 Recovering a Switch Using Maintenance Mode A switch can become inoperable or unma nageable for the following reasons:  Corrupt firmware  Lost IP address  Corrupt switch configuration  Forgotten password In these specific cases, you can recove r th[...]

  • Seite 104

    4–Diagnostics/T roubleshooting Recovering a Switch Using Maintenance Mode 4-14 59265-02 B 4. The Maintenance menu list s several recovery options. T o select a switch recovery option, type the corresp onding number , and then press ENTER . 0) Exit 1) Image Unpack 2) Reset Network Config 3) Reset User Accounts to Default 4) Copy Log Files 5) Remov[...]

  • Seite 105

    4–Diagnostics/Troubleshooting Recovering a Switch Using Maintenance Mode 59265-02 B 4-15 5. Select option 1 from the maintenance menu. When prompted for a file name, type the firmware image file name . For example: Image filename: filename Unpacking ’filename’, please wait... Unpackage successful. 6. Select option 7 to reset the switch a nd e[...]

  • Seite 106

    4–Diagnostics/T roubleshooting Recovering a Switch Using Maintenance Mode 4-16 59265-02 B Remaking the File System in Maintenance Mode (Option 6) If there is a loss of power , the switch configuration could become corrupt. The file system on which the configuration is stored must be re-created. The Remake Filesystem option reset s the switch to t[...]

  • Seite 107

    59265-02 B 5-1 5 Removal/Replacement This section describes the removal and r eplacement procedures for the following FRUs:  SFP and XP AK transceivers  Power supplies for model 5802V switches T ransceiver Removal and Replacement The SFP and XP AK transceivers can be removed and replaced while the switch is operating without damaging the swit[...]

  • Seite 108

    5–Removal/Replacement Power Supply Removal and Replacemen t 5-2 59265-02 B Power Supply Removal and Replacement Model 5802V power supplies are hot-pluggabl e: you can remove or inst all one of the power supplies while the switch is o perating without disrupting service. The power supplies are also interchangeable; th at is, the left and right pow[...]

  • Seite 109

    5–Removal/Replaceme nt Power Supply Remova l and Replacement 59265-02 B 5-3 T o install a power supply: 1. Confirm that the Heartbeat LED is blinking once per second (normal operation), so that the swit ch can correctly report the power supply status. 2. Confirm that the new power supply is comp atible with the switch air flow direction. The part[...]

  • Seite 110

    5–Removal/Replacement Power Supply Removal and Replacemen t 5-4 59265-02 B[...]

  • Seite 111

    59265-02 B A-1 A S pecifications This appendix contain s the specifications for the QLogic 5800V Series Fibre Channel switch. T o locate all connections, switches, controls, and compo nents, refer to Section 1 .  Fabric S pecifications  Maintainability  Fabric Management  Dimensions  Electrical  Power Cord S pecifications  Envi[...]

  • Seite 112

    A–S pecifications Fabric S pecifications A-2 59265-02 B Fabric S pecifications Fibre Channel Protocols ................. FC-AL Rev 4.6 FC-AL-2 Rev 7.0 FC-DA FC-FLA FC-FS-2 FC-GS-5 FC-FG FC-LS FC-MI-2 FC-PH Rev . 4.3 FC-PH-2 FC-PH-3 FC-PI-3 FC-SP FC-T ape FC-VI FC-SW-4 Fibre Channel Element MIB RFC 2837 Fibre Alliance MIB V ersion 4.0 Fibre Channe[...]

  • Seite 113

    A–S pecific ations Fabric S pecific ations 59265-02 B A-3 Scalability........................................ Maximum 239 switches, depending on confi gurati on Maximum User Ports ...................... > 475,000 ports depe nding on confi gurati on Buffer Credits ........................... ....... 16 buffer credit s per port, ASIC embedded me[...]

  • Seite 114

    A–S pecifications Maintainability A-4 59265-02 B Maint ainability Fabric Management Diagnostics ..................................... Power-on self test (POST) analyzes all functional component s except SFP transceivers. Port tests inclu de online, internal, and external tests. User Interface ................................. LED indicators Field[...]

  • Seite 115

    A–S pecific ations Dimensions 59265-02 B A-5 Dimensions Electrical Power Cord S pecifications The switch comes with one o r two power cord s with NEMA 5-1 5 non-locking plugs (SKU: CPK-9000-US). This power cord is approved for North America (USA, Canada, Puerto Rico), Mexico, Central America, So uth America, Korea, T aiwan, Philippines, and Thail[...]

  • Seite 116

    A–S pecifications Power Cord S pecific ations A-6 59265-02 B Finland CEE 7/7 Plug CPK-9000-CEE Greece CEE 7/7 Plug CPK-9000-CEE Hong Kong/Macau (PRC) BS1363/A Plug CPK-9000-UKHK Hungary BS1363/A Plug CPK-9000- UKHK India BS 546 Plug CPK-9000-ZAIN Indonesia CEE 7/7 Plug CPK-9000-CEE International (special) IEC 60309 Plug CPK-9000-IEC Ireland (Nort[...]

  • Seite 117

    A–S pecific ations Environment al 59265-02 B A-7 Environment al T emperature Operating.................................... Non-operating............................. 5–40°C (41 to 104 °F) –20–70°C (–4 to 158°F) Humidity Operating.................................... Non-operating............................. 10–90%, non -condensing 1[...]

  • Seite 118

    A–S pecifications Regulatory Certifications A-8 59265-02 B Regulatory Certifications Safety S tandards ............................ UL 60950-1 (USA) CSA 22.2 60950-1 (Canada) EN60950-1 (EC) CB Scheme-IEC 60950-1 (International) Emissions S tandards ...................... FCC Part 15 Class A (USA) ICES-003 Class A ITE (Canada) EN 55022 Level A (EC[...]

  • Seite 119

    59265-02 B Glossary-1 Glossary Active Zone Set The zone set that define s the current zoning for the fabric. Active Firmware The firmware image on the switch that is in use. Activity LED A port LED that indicates when frames a re entering or leaving the port. Administrative St ate S tate that determines the operat ing state of the port, I/O blade, [...]

  • Seite 120

    Installation Guide S tackable Fibre Channel Switch 5800V Series Glossary-2 59265-02 B Certificate Authority Certificate A certificate that validates a certificate authority on a device to allow aut hentica- tion of signed certificates from that authority . Challenge-Handshake Authentication Protocol CHAP is used for remote logon, usually between a [...]

  • Seite 121

    59265-02 B Glossary-3 Installation Guide S tacka ble Fibre Channel Switch 5800V Series Extended Credit s A feature of Enterprise Fabric Suite t hat enables you to reallocate port buffer credits to extend tra nsmission distances. Fabric Dat abase The set of fabrics that have been o pened during a QuickT ools or management session. Fabric Device Mana[...]

  • Seite 122

    Installation Guide S tackable Fibre Channel Switch 5800V Series Glossary-4 59265-02 B IKE Policy An IKE profile that defines the type of dat a traffic to secu re between the switch and the peer , and how to encrypt that da ta. See Internet Key Exchange (IKE) . Inband Management The ability to manage a switch through another switch over an inter-swi[...]

  • Seite 123

    59265-02 B Glossary-5 Installation Guide S tacka ble Fibre Channel Switch 5800V Series mPort T echnology A feature that enables you to ch oose which Fibre Channel ports are a ctive on a switch that is licensed for fewer than the 20 ports. Multist age T opology A fabric in which two or more edge switches connect to one or more core switches. Network[...]

  • Seite 124

    Installation Guide S tackable Fibre Channel Switch 5800V Series Glossary-6 59265-02 B Secure Socket La yer Protocol that secures connections to the switch for Enterprise Fabric Suite, Qu ick- T ools, the API, and SMI-S. Signed Certificate A certificate that has been signed by a certificate authority that cont ains the public/private key pa ir and t[...]

  • Seite 125

    59265-02 B Glossary-7 Installation Guide S tacka ble Fibre Channel Switch 5800V Series Zone A set of ports or devices groupe d toget her to control the exchange of information . Zone Set A set of zones grouped together . The active zone set defines the zoning for a fabric. Zoning Dat abase The set of zone set s, zones, and aliases stored on a switc[...]

  • Seite 126

    Installation Guide S tackable Fibre Channel Switch 5800V Series Glossary-8 59265-02 B[...]

  • Seite 127

    59265-02 B Index-1 Index Numerics 10/100 Base-T straight cable 3-1 1 A account name default 3-12 FTP 3-17 maintenance mode 4-13 active zone set 2-2 Activity LED 1-5 , 1-7 air flow A-7 alias 2-2 altitude A-7 Application Programming Interface 1-1 1 association 2-19 authority 2-19 authorization 2-20 B bandwidth 2-4 , A-3 boot loader 4-16 browser 3-2 b[...]

  • Seite 128

    Installation Guide S tackable Fibre Channel Switch 5800V Series Index-2 59265-02 B D device access 2-2 authentication 2-20 authorization 2-20 cabling 3-13 description 2-1 performance 2-6 security 2-20 security example 2-22 diagnostics 4-1 , 4-3 , A-4 digital certificate 2-19 dimensions A-5 distance 2-3 domain ID conflict 4-8 description 2-7 lock 2-[...]

  • Seite 129

    59265-02 B Index-3 Installation Guide S tacka ble Fibre Channel Switch 5800V Series H harmonics A-8 Heartbeat LED 1-3 , 4-3 heat output A-5 host authentication example 2-29 host bus adapter 2- 1 humidity 3-2 , A-7 HyperT erminal application 3-8 I IKE - See Internet Key Exchange immunity A-8 inband management 2-16 Input Power LED 4-2 installation 3-[...]

  • Seite 130

    Installation Guide S tackable Fibre Channel Switch 5800V Series Index-4 59265-02 B performance device 2-6 switch 2-3 PKI - See Public Key Infrastructure planning 2-1 policy IKE 2-19 security 2-19 port 1-6 binding 2-19 buffer credit s 2-3 characteristics A-2 diagnostics 4-7 Ethernet 1-7 fabric 1-6 Fibre Channel 1-4 generic 1-6 LEDs 1-5 maximum numbe[...]

  • Seite 131

    59265-02 B Index-5 Installation Guide S tacka ble Fibre Channel Switch 5800V Series shock A-7 Simple Mail T ransfer Protocol 2-17 Simple Network Management Protocol description 1-12 service 2-17 site requirement s 3-1 six-switch stacking 2-10 small form-factor pluggable port 1-4 transceiver 1-5 , 3-5 , 5-1 SMI-S - See S torage Management Initiative[...]

  • Seite 132

    Installation Guide S tackable Fibre Channel Switch 5800V Series Index-6 59265-02 B Z zone conflict 4-9 definition 2-2 zone set active 2-2 definition 2-2 zoning datab ase 2-2 hardware enforced 2-2 limits 2-2[...]

  • Seite 133

    [...]

  • Seite 134

    Corporate Headquarters QLogic Corporation 26650 Aliso V iejo Parkway Aliso V iejo, CA 92656 949.389.6000 www. qlogic.com International Office s UK | Ireland | Germany | France | India | Japan | China | Hong Kong | Singapore | T aiwan © 201 1 QLogic Corporation. Specifications are subject to change without notice. All rig hts rese rved worldwide. Q[...]