Prima LPR 721 Bedienungsanleitung

INSTRUCTION BOOKLET W ASHER-DR YER LPR 721 1200 AUTOWASH QUICK WASH RINSE HOLD HALF LOAD SPIN REDUCTION ON/OFF PROGRAMMES LPR 721 132983050 GB[...]

2 Installation ● This appliance is heavy . Care should be taken when moving it. ● It is dangerous to alter the specifications or attempt to modify this product in any way . ● All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in inst[...]

3 Contents F or the User Important Safety Information 2 Y our New W asher-Dryer 4 Description of the Appliance 5 Detergent dispenser drawer 5 Child Safety Feature 5 The Control Panel 6-7 Operating sequence 8-12 W ashing 5 kg of white cotton at 95°C 8 Load the laundry 8 Measure out the detergent 8 Measure out the fabric softener 8 Select the requir[...]

4 Y our New W asher -Dryer Y our new machine meets all moder n requirements for effective treatment of laundry with low water , ener gy and detergent consumption. It is gentle with your laundry, simple to use and easy to care for . ● The special wool programme with its new delicate wash system treats your woollens with extreme care. ● The anti-[...]

5 Description of the Appliance 1 Detergent dispenser drawer 2 Programme guide 3 Drying indicator light 4 Drying time selector dial 5 “Option” buttons 6 “ON/OFF” button 7 “Mains-on” light 8 Programme selector dial 9 Door opening handle 10 Filter 1 1 Adjustable feet Deter gent dispenser dr a w er Prewash Main wash Fabric softener The prog[...]

6 The Contr ol Panel Important! In order to save energy and to avoid too long drying times we suggest not to reduce the spin speed when you wash and dry automatically . 5 QUICK W ASH button By depressing this button on programmes A, B, C, D and H the wash time is reduced. This is suitable only for garments which are lightly soiled. 6 HALF LO AD but[...]

7 3 ON/OFF button By depressing this button the machine starts operating. When depressing it again, the machine stops. The push button is provided with a child-proof safety lock. Move the small slider placed in the middle of the button downwards to lock the button in the «off» position. 9 Mains-on light This light will illuminate when the machine[...]

8 3. Measur e out the fabric softener If required, pour fabric softener into the compartment marked (the amount used must not exceed the “MAX” mark in the drawer). Close the drawer gently . 4. Select the r equir ed option(s) Depress SPIN REDUCTION and/or QUICK W ASH and/or RINSE HOLD button, if required. 5. Select the r equir ed pr ogr amme T u[...]

9 6. Star t the machine Before starting up the machine check that: ● the appliance is plugged in ● the water supply tap is turned on ● the drain hose is correctly and securely positioned ● the door and the detergent dispenser drawer are closed. Depress the ON/OFF button : the mains-on light will illuminate and the machine starts operating. [...]

10 W ASHING 2 KG OF MIXED F ABRICS A T 50°C Suppose you have 2 kg of mixed fabrics to wash. They are rather delicate fabrics and should not be washed at a high temperature. 1. Load the laundr y Open the door by pulling the catch outward. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door . 2. Me[...]

11 DR YING 2.5 KG OF COTTON Y ou have for example just machine-washed and spun at 1200 rpm 5 kg of laundry . They are cotton fabrics of medium weight which you want to iron as soon as they are dry . Switch off the machine. Then remove the laundry from the appliance and divide the items to obtain two loads of approx. 2.5 kg each. 1. Load the laundr [...]

12 AUTODR YING 1.5 KG OF MIXED F ABRICS Y ou intend to wash and dry automatically 1.5 kg of mixed fabrics which have to be ironed. Proceed as follows: 1. Load the laundr y Open the door by pulling the catch outward. Load the items one at a time and close the door . 2. Measur e out the deter gent and fabric softener Pull out the dispenser drawer unt[...]

13 W ashing and Drying Hints Do NOT overload the machine. W eigh the laundry the first few times you use the appliance. The average weights of the most common items are listed below as a guide: 1000g = 1 kg Sheet 700-1000 g Pillow case 100-200 g T ablecloth 400-500 g Serviette 50-100 g T ea towel 70-120 g Linen hand towel 100-150 g T owelling hand [...]

14 And in which f orm? Not only are there different types of deter gent, but they are also available in different forms. Whether you chose a powder or liquid in traditional or compact form is your own personal choice. TRADITIONAL POWDERS Pour the powder directly into the dispenser drawer . Do not sprinkle powder onto clothes in the machine drum. TR[...]

15 W ashing Pr ogrammes Pr ogrammes for cotton and linen Degree of soil and type of laundry Description W ash programme Programme dial position Possible options Max. load Fast coloureds Whites Whites with prewash For heavy soiled cotton items (whites and coloureds). Fast coloured cotton or linen fabrics, shirts, underwear , towels. White cotton, fo[...]

16 W ashing Pr ogrammes Degree of soil and type of laundry Description W ash programme Programme dial position Synthetic - Mixed fabrics Possible options Short spin W ool wash Delicate wash Synthetic or mixed fabrics, underwear , coloured garments, non-shrink shirts, blouses. Specially tested programme for wool garments bearing the “Pure new wool[...]

17 Drying Pr ogrammes (*) The STORE DR Y drying programme for cotton is the reference programme for the Energy Label data, in compliance with standard EEC 92/75. Degree of drying Drying time mins Spin speed Max. load Programme/ T ype of fabric S tore dry (*) Suitable for items to put away without ironing G Full heat drying Cotton and linen (towels,[...]

18 W ash Car e Symbols W ash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct programme on your washing machine. W ASHING SYMBOL BLEACHING IRONING DR Y CLEANING TUMBLE DR YING[...]

19 Cleaning the dr a w er r ecess Having removed the drawer , use a small brush to clean the recess, ensuring that all washing powder residue is removed from the upper and lower part of the recess. Replace the drawer and run the rinse programme for a few minutes without any clothes in the drum. Cleaning the filter The water drain filter A clean fil[...]

20 The dangers of fr eezing If the machine is exposed to temperatures below 0°C, certain precautions should be taken. ● T urn off the water tap. ● Unscrew the inlet hose. ● Unhook the drain hose from the rear support and position the end of this hose and that of the inlet hose in a bowl. Run the draining programme. ● Disconnect the applian[...]

21 Something Not W orking Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer . Before contacting your local Service Centre, please carry out the checks listed below . IMPOR T ANT : if you call out an engineer to a fault listed below , or to repair a fault caused by incorr[...]

22 Symptom The door will not open ● The programme is still running. ● The door lock has not yet released. ● There is water in tub. The door can not be opened if water is present in the tub. The machine makes an unusual noise ● The machine is fitted with a type of motor which makes an unusual noise compared with other traditional motors. Thi[...]

23 Guarantee Conditions Standar d guar antee conditions W e, undertake that if, within 12 months of the date of the purchase, this Prima appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option, repair or replace the same FREE OF ANY CHARGE for labour , materials or carriage o[...]

24 Installation Instructions T echnical Specifications It is dangerous to alter the specifications or attempt to modify this product in any way . Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or co[...]

25 Set the machine upright and remove the two remaining bolts from the back. Pull out the three plastic spacers from the holes into which the bolts were fitted. Plug the open holes with the plugs which you can find in the envelope containing the instruction booklet. Positioning Install the machine on a flat hard floor . Make sure that air circulati[...]

26 W ater inlet Connect the hose to a tap with a 3/4” thread. Do not use previously used hoses for water connection. Installation should comply with local water authority and building regulations’ requirements. The appliance must be connected to a cold water supply . A minimum water pressure of 0.05 MPa (0.5 bar) is required for safe operation [...]

27 2. Onto a sink outlet spigot. If the outlet spigot has not been used before, remove any blanking plug that may be in place. Push the drain hose onto the spigot and secure with a clip if required, ensure a loop is formed in the drain hose (see diagram) to prevent waste from the sink entering the washing machine. The drain hose may be extended to [...]

28 Electrical connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. W ARNING: THIS APPLIANCE MUST BE EAR THED. The manufacturer declines any liability should this safety measure not be observed. Before switching on, make sure the electricity supply voltage is the same[...]

29 The height (C-Fig. C) depends on the height of the adjacent furniture's base. b) Hinges T o mount the hinges it is necessary to drill two holes (dia. 35 mm, depth 12.5-14 mm depending on the depth of door furniture) on the inner side of the door . The distance between the holes hobs fixing centres must be 416 mm. The distance (B) from upper[...]

30 If the door has to be opened from left to right, invert the position of the plates (7), the magnet (4) and the plate (5) (Fig. B and E). Mount the countermagnet (6) and the hinges (1) as previously described Recommendations r egar ding the construction and fitting of a base when the installa tion r equir es an integr ated appliance to be r aised[...]

c[...]