Panasonic WJ-NT314 Bedienungsanleitung

Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. Network Interface Unit Network Operating Instructions Model No. WJ-NT314 LINK RCV SND OPERATE Network Interface Unit WJ-NT314[...]

2 CONTENTS Preface ....................................................................................................................... .............. 3 About these operating instructions ....................................................................................... 3 Trademarks and registered trademarks ................................[...]

3 Preface About these operating instructions There are 2 sets of operating instructions for the WJ-NT314 as follows. • Operating Instructions (Book) • Network operating instructions (PDF) These operating instructions contain descriptions of how to operate this product using a PC via a network and of how to configure the settings. Refer to the o[...]

4 Monitor Images on a PC The following are descriptions of how to monitor images from the unit on a PC. Monitor images from a single camera entries. The default user name and password are as follows. User name: admin Password: 12345 When accessing the unit without changing the default password, the pop-up window saying that it is recommended to cha[...]

5 About the "Live" page q [Setup] button (*1) Click this button to display the setup menu. The but- ton will turn green and the setup menu will be dis- played. w [Live] button The button will turn green and the "Live" page will be displayed. e [1] to [4] buttons Click this button to display the "Live" page. The but- to[...]

6 u B/W button (*2) Click the desired button to switch color (colour) of the displayed images between color (colour) and B/W. : Images will be displayed in B/W (black and white). : Images will be displayed in color (colour). : Activates Auto 1 mode. (The camera selects black and white mode if the picture is dark, or color mode if the picture is bri[...]

7 !4 Frame Displays/hides the frame when a person is detected. Refer to page 11 for further information. !5 Track Displays/hides the track of motion made by the detected person. Refer to page 11 for further information. !6 Unit title The unit title entered for "Unit title" on the [Basic] tab will be displayed. ( ☞ page 20) !7 Camera tit[...]

Monitor images from multiple cameras Images from multiple cameras can be displayed on a multi-screen. Images from 4 cameras can be displayed simul- taneously. To display images on a multi-screen, it is necessary to register cameras in advance. 4 cameras can be registered as a group and up to 4 groups (16 cameras) can be registered. ( ☞ page 33) I[...]

9 Action at an Alarm Occurrence The alarm action will be performed when the following alarm occur. Alarm type Terminal alarm: When connecting an alarm device such as a sensor to the connector terminal (Alarm Input No. 1 to 4) on the rear of the unit, the alarm action (unit action at an alarm occurrence) will be performed when the connected alarm de[...]

10 About the image recognition function AVMD, which is one of the image recognition functions, are featured in this unit. It is possible to detect moving, abandoned, or removed objects in the shooting area by setting the detection program in advance. ( ☞ page 34) When an abandoned or removed object is detected, the frame and track, are displayed [...]

11 q Alarm occurrence indication for each channel Channel that has detected AVMD (one of CH1 to 4) will light. w Frame Blue frame will be displayed when a person is detected in the shooting area. The frame will turn red when the detected person enters the detection area that has been set, and an alarm occurs. It is possible to display or hide the f[...]

12 T ransmit Images onto an FTP Ser ver Images can be transmitted to an FTP server. By configuring the following settings, transmission of images captured at an alarm occurrence or captured at a designated interval to an FTP server will become available. Important: When using this function, set the user name and the password to access the FTP serve[...]

13 Save images on the SD memory card when failed to transmit images by the FTP periodic transmission function Images that have failed to transmit using the FTP periodic transmission can be saved automatically on the SD mem- ory card. When using the "SD memory REC" function of a Panasonic’s network disk recorder, select "OFF" f[...]

14 Step 3 Move the current directory to "sd_data" and obtain images. Note: • When logging in the unit, each directory will be displayed. Images on the SD memory card can be found in the "sd_data" directory. Move to the "sd_data" directory and obtain images. <Directory structure of " sd_data " > To obt[...]

15 About the Network Security of This Unit Equipped security functions The following security functions are featured in this unit. q Access restrictions by the host authentication and the user authentication It is possible to restrict users from accessing the unit by setting the host authentication and/or the user authenti- cation to on. ( ☞ page[...]

16 Display the Setup Menu and Configure the Settings of the Unit using a PC The settings of the unit can be configured on the setup menu. The setup menu is only operable by users whose access level is "1. Administrator". How to display the setup menu Step 1 Display the "Live" page. ( ☞ page 4) Step 2 Click the [Setup] button o[...]

17 Step 1 Click the desired button in the frame on the left of the window to display the respective setup menu. When there are tabs at the top of the setup page dis- played in the frame on the right of the window, click the desired tab to display and configure the setting items relating to the name of the tab. Step 2 Complete each setting item disp[...]

18 About the operation window q [Live] button The "Live" page will be displayed. w [Basic setup] button Click this button to display the "Basic setup" page. The basic settings such as time and date and cam- era title, and the settings relating to the NTP server and the SD memory card can be configured on the "Basic setup&qu[...]

19 i [Server setup] button Click this button to display the "Server setup" page. The settings relating to the mail server and the FTP server to which the unit accesses can be configured on the "Server setup" page. Refer to page 48 for fur- ther information. o [Network setup] button Click this button to display the "Network [...]

20 Configure the basic settings of the unit [Basic setup] The basic settings such as time and date and unit name, and the settings relating to the NTP server and the SD memory card can be configured on the "Basic setup" page. The "Basic setup" page has 4 tabs of the [Basic] tab, the [NTP] tab, [SD memory card] tab, and the [RS48[...]

21 [Alarm status update mode] Select an interval to notify the unit status (alarm status, audio status, etc.) from the following. When the status of the unit changes, the alarm occur- rence indication button, the mic input button, or the audio output button will be displayed to notify of the unit status. Polling (30 sec): Updates the status each 30[...]

22 Configure the settings relating to the NTP server [NTP] Click the [NTP] tab on the "Basic setup" page. ( ☞ page 20) The settings relating to the NTP server such as the NTP server address, port number, etc. can be configured on this page. [Time adjustment] Select the time adjustment method from the following. Manual setup: Time set on[...]

23 ■ SD memory card setup [SD memory card] Select "Use" or "Not use" to determine whether or not to use the SD memory card. Default setting: Not use Important: • When the power is shut down while saving images on the SD memory card because of power failure, etc., SD memory card or the contents of card may be destroyed. (When[...]

24 Size of SD memory card Size of SD memory card 5 (Normal) 6 7 8 9 (Low) Image quality 2 GB 1 GB 512 MB 256 MB 128 MB 64 MB Approx. 22 000 pics Approx. 11 000 pics Approx. 5 500 pics Approx. 2 750 pics Approx. 1 375 pics Approx. 687 pics Approx. 26 000 pics Approx. 13 000 pics Approx. 6 500 pics Approx. 3 250 pics Approx. 1 625 pics Approx. 812 pi[...]

25 2 GB 1 GB 512 MB 256 MB 128 MB 64 MB Size of SD memory card Approx. 32 000 pics Approx. 16 000 pics Approx. 8 000 pics Approx. 4 000 pics Approx. 2 000 pics Approx. 1 000 pics Approx. 36 000 pics Approx. 18 000 pics Approx. 9 000 pics Approx. 4 500 pics Approx. 2 250 pics Approx. 1 125 pics Approx. 38 000 pics Approx. 19 000 pics Approx. 9 500 p[...]

26 Configure the settings relating to images and audio [Camera setup] The settings relating to JPEG/MPEG-4 images and camera operation can be configured on the "Camera setup" page. The "Camera setup" page has 4 tabs of the [JPEG/MPEG-4] tab, the [Camera] tab, [Audio] tab and the [Coaxial setup] tab. Configure the settings relati[...]

27 ■ JPEG setup [Refresh interval (JPEG)] Select an interval to refresh the displayed JPEG image from the following. NTSC model: 0.1 fps/0.2 fps/0.33 fps/0.5 fps/1 fps/ 2 fps/3 fps/5 fps */6 fps */10 fps */15 fps */30 fps * Default setting: 3 fps PAL model: 0.08 fps/0.17 fps/0.28 fps/0.42 fps/ 0.83 fps/1.7 fps/2.5 fps/4.2 fps */5 fps */8.3 fps */[...]

28 and "Unicast port2 (Audio)" will automatically be selected when transmitting images and audio from the unit. When it is unnecessary to fix the port number for MPEG-4 image transmission such as when using in a particular LAN environment, it is recommended to select "Unicast port (AUTO)". Unicast port (MANUAL): Up to 8 users ca[...]

29 About the individual setup menu It is possible to configure the settings for JPEG and MPEG-4 images of each channel individually. When configuring the settings, consider the network load carefully. After configuring the settings in the individual setup menu and returning to the [JPEG/MPEG-4] menu, changed items are marked with "*". [Nu[...]

30 Configure the settings relating to camera [Camera] Click the [Camera] tab on the "Camera setup" page. ( ☞ page 26) The following are descriptions of how to display the setup menu and configure the settings relating to camera opera- tion using the operation panel. Refer to the provided operating instructions for further information ab[...]

31 Configure the settings relating to audio [Audio] Click the [Audio] tab on the "Camera setup" page. ( ☞ page 26) The following are descriptions for when the settings relating to audio from CH1 is configured on this page. [Audio mode] Select the communication mode used for audio data transmission/reception between the unit and the PC f[...]

32 [Audio output port (PC to Unit )] Enter the transmission port number (the port number on the unit used to receive audio data transmitted from the PC). Available value: 1024 - 50000 (Only even numbers are available.) Default setting: 34004 Note: The transmission port number entered for "Audio output port (PC to Unit)" will be used only [...]

33 Configures the multi-screen settings [Multi-screen setup] The cameras to be used for the multi-screen display can be registered on this page. The following cameras are available for the multi-screen display. (As of August, 2007) Cameras connected to WJ-NT314, cameras connected to the network, WV-NP240 series, WV-NP1000 series, WV-NW470S series, [...]

34 Configure the A VMD settings [V ideo analytics setup] The settings relating to the detection area, depth, and schedule for AVMD can be configured on the "Video analytics setup" page. The "Video analytics setup" page has 2 tabs of the [AVMD] tab, and the [Schedule] tab. Set the detection program [A VMD] Click the [AVMD] tab on[...]

35 Notes: • Color in the ( ) beside the icon is the color to display the detection area. • Select a parameter from " P 1 (Blu)" to " P 3 (Yel)" when setting an area to detect an intruder. Alarm occurs when a moving object enters the area. It may take around 2 seconds since the person is detected until the alarm occurs. • S[...]

36 Set the detection depth It is possible to set the depth information for each detec- tion program both automatically and manually. • Set the depth automatically ( ☞ page 36) • Set the depth manually ( ☞ page 37) Set the depth automatically Note: To set the depth automatically, have a person move forward and backward several times within t[...]

37 Set the depth manually Step 1 Click the [SET] button of "Depth correction" on the [AVMD] tab. → The "Depth correction" menu will be displayed. Step 2 Select "Manual setup" for "Setup mode". Step 3 Draw a marker by dragging the mouse between the front side and rear side on the screen. Notes: • By draggi[...]

38 Set the A VMD schedule [Schedule] Click the [Schedule] tab on the "Video analytics setup" page.( ☞ page 34) It is possible to set the schedule for each detection program. For example, to monitor the entrance and exit, it is possible to set the detection program for the entrance between 6 a.m. and 12 a.m. on Monday to Friday, and for [...]

39 How to delete the set schedule Step 1 Select the schedule number from "Schedule 1" to "Schedule 8". Step 2 Uncheck the check box of the set day of the week. Step 3 Click the [SET] button after completing the settings. Step 4 To check the schedule on the time bar, click [ i ] and select the channel number (detection program) f[...]

40 Configure the alarm settings [Alarm setup] The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence and the alarm occurrence notification can be configured on the "Alarm setup" page. The "Alarm setup" page has 2 tabs of the [Alarm] tab, and the [Notification] tab. Configure the s[...]

41 Auto mode It is possible to activate auto mode for the camera con- nected to the video input connector of event CH (CH1 to 4) when the AVMD is detected. (When a preset position number is selected, operation starts after the camera moves to the preset position.) Auto track: Performs auto track when the camera sup- ports auto track (AUTO TRACK). ?[...]

42 Configure the settings relating to the alarm image [Alarm image setup] Click the [Alarm] tab on the "Alarm setup" page. ( ☞ page 40) The settings relating to the alarm image to be transmitted to the FTP server can be configured on this page. The alarm image will be transmitted to the FTP server. To transmit alarm images to the FTP se[...]

43 ■ Alarm output terminal setup Select a desired alarm output terminal number from the pull-down menu, and configure the following items. [Alarm output setup] Select "ON" or "OFF" to determine whether or not to output the alarm signals to the alarm out connector when an alarm is detected. Default setting: OFF [External termin[...]

44 Configure the settings relating to the mail notification [Notification] Click the [Notification] tab on the "Alarm setup" page. ( ☞ page 40) The settings relating to the alarm mail can be configured on this page. To notify of an alarm occurrence by e-mail, it is necessary to configure the settings of the mail server. ( ☞ page 48) ?[...]

45 Configure the settings relating to Panasonic alarm protocol [Panasonic alarm protocol] Click the [Notification] tab on the "Alarm setup" page. ( ☞ page 40) The settings relating to Panasonic alarm protocol can be configured on this page. ■ Panasonic alarm protocol setup [Panasonic alarm protocol] Select "ON" or "OFF&[...]

46 [User authentication] Select ON or OFF to determine whether or not to authenticate the user. Default setting: OFF [User name] Enter a user name. Number of characters that can be entered: 1 - 32 characters Default setting: (blank) [Password] [Retype password] Enter the password. Number of characters that can be entered: 4 - 32 characters Default [...]

47 [Host authentication] Select "ON" or "OFF" to determine whether or not to authenticate the host. Default setting: OFF Important: Before selecting "ON" for "Host authentication", it is necessary to register IP addresses of the PCs to be allowed to access the unit and determine their access levels. [IP addre[...]

48 Configure the settings of the servers [Server setup] The settings relating to the mail server and the FTP server can be configured on this page. The "Server setup" page has 2 tabs of the [Mail] tab and the [FTP] tab. Configure the settings relating to the mail server [Mail] Click the [Mail] tab on the "Server setup" page. The[...]

49 Configure the settings relating to the FTP server [FTP] Click the [FTP] tab on the "Server setup" page. ( ☞ page 48) The settings relating to the FTP server used to transmit the alarm images can be configured on this page. [FTP server address] Enter the IP address or the host name of the FTP serv- er. Number of characters that can be[...]

50 Configuring the network settings [Network setup] The network settings and the settings relating to DDNS (Dynamic DNS) and SNMP (Simple Network management Protocol) can be configured on this page. The "Network setup" page has 4 tabs of the [Network] tab, the [DDNS] tab, the [SNMP] tab and the [FTP] tab. Configure the network settings [N[...]

51 [Default gateway] When not using the DHCP function, enter the default gateway of the unit. Default setting: 192.168.0.1 <Unavailable IP addresses for the default gate- way> 0.*.*.* *.*.*.0 255.*.*.* *.*.*.255 127.0.0.1 Class D address (224.0.0.0 - 239.255.255.255) Class E address (240.0.0.0 - 255.255.255.255) * These IP addresses for the d[...]

52 Notes: • To access the unit via the Internet by connecting the unit to a broadband router, it is necessary to assign a respective port number for each device and address translation by using the port forwarding function. For further information, refer to the operating instructions of the broadband router in use. • The port forwarding functio[...]

53 [DDNS] Select "ON" or "OFF" to determine whether or not to use the DDNS function. Default setting: OFF [Host name] Enter the host name to be used. Number of characters that can be entered: 1 - 64 characters Default setting: (blank) [User name] Enter the user name (login name) to access the DDNS server. Number of characters th[...]

54 Configure the settings relating to SNMP [SNMP] Click the [SNMP] tab on the "Network setup" page. ( ☞ page 50) The settings relating to SNMP can be configured on this page. It is possible to check the status of the unit by con- necting to the SNMP manager. When using the SNMP function, contact the network administrator. [Community nam[...]

55 Configure the settings relating to the FTP periodic transmission [FTP periodic transmission] Click the [FTP] tab on the "Network setup" page. ( ☞ page 50) The settings relating to the periodic transmission of images to an FTP server can be configured on this page. To transmit images to an FTP server periodically, it is necessary to c[...]

56 How to configure the schedule settings Step 1 Check the check box of the desired day of the week. → The selected day of the week will be validated for the schedule. Step 2 To designate time, click [ i ] beside the hour and minute and select the desired "hour" and "minute". When not designating time, check the checkbox of &q[...]

57 Maintenance of the unit [Maintenance] System log check, firmware upgrade, and initialization of the setup menu can be performed on this page. The "Maintenance" page has 3 tabs of the [System log] tab, the [Upgrade] tab and the [Initialization] tab. Check the system log [System log] Click the [System log] tab of the "Maintenance&qu[...]

58 Upgrade the firmware [Upgrade] Click the [Upgrade] tab of the "Maintenance" page. ( ☞ page 57) The current firmware can be checked and upgraded to the latest version on this page. Contact the dealer for further information about the firmware upgrade. [Model No.], [MAC address], [Serial number], [Firmware version], [IPL version] Infor[...]

59 Initialize/restart the unit [Initialization] Click the [Initialization] tab of the "Maintenance" page. ( ☞ page 57) Initialization of the setup data and HTML files of the unit and restarting of the unit can be performed on this page. [Initialize setup data (Except network setup data)] Click the [Execute] button to reset the settings [...]

60 About the Displayed System Log Error indications relating to SMTP Category POP3 server error SMTP server error Connection error Internal error Authentication error Failed to find POP3 server SMTP authentication error Other error Failed to resolve mail server address from DNS Failed to find SMTP server. MAIL FROM command error RECP TO command err[...]

61 Category Category Connection error Connection error Time adjustment syn- chronizing with NTP suc- ceeded. Internal error Internal error Cannot connect to DDNS server. Cannot connect to NTP server. Succeeded in the update. Other error User name and password isn't correct. IP address updated failed. Other error • The designated IP address o[...]

62 • Is the power of the camera on? Check if the power of the camera is turned on. Operating Instructions • Is the LAN cable (category 5) is firmly connected to the network connector on the rear of the unit? Operating Instructions • Are you accessing the wrong IP address? Check the connection as follows: With the Windows command prompt, > [...]

63 Cannot access from the browser. The buttons on the browser are displayed out of align- ment. • Is the same IP address provided to other devices? Are there contradictions between the address and the network subnet to be accessed? <When the unit and the PC are connected in the same subnet> Are the IP addresses of the unit and the PC set in[...]

64 • Is the focus adjusted correctly? Adjust the focus correctly by clicking the focus but- tons. • When defocusing is caused by the camera position being moved, carry out the position refresh to correct the focus. 6 59 • Is there dust or dirt on the lens or dome cover? Check if there is dust or dirt on the lens or dome cover. • Is the view[...]

65 • Is the SD memory card formatted? • When the power is shut down while saving images on the SD memory card because of power failure, etc., it may become impossible to write data on the SD memory card. In such a case, format the SD memory card after obtaining the images saved on the card. • Isn ’ t the SD memory card out of order? There a[...]

66 • Check the settings for the self return function. • Confirm that the camera is connected correctly and firmly. • Confirm that the connected camera is available for the desired operation. Depending on the models of the connected cameras, the available functions may be different. Refer to the operating instructions of the connected camera f[...]

67 • Is the viewer software installed on a PC? Confirm that the viewer software "Network Camera View3" is installed. The mic input button and the audio output button on the "Live" page do not display the current status in real time. Operating Instructions • Does your PC meet the system requirements to oper- ate this unit? Ch[...]

68 • This may occur due to the display adapter and driver combination. When this occurred, update the driver of the display adapter to the latest version first. If updating the driver does not solve the problem, adjust the hardware acceleration as follows. The following are descriptions for when Microsoft ® Windows ® XP Professional SP2 is inst[...]

69 • Click "Internet Options" on the Tools menu of Internet Explorer, and then click the [Security] tab. Then, click the [Custom Level…] button to open the "Security Setting" window. Under "Miscellaneous", select "Enable" for "Allow script-initiated windows without size or position constraints".[...]

70 • Delete temporary internet files as follows. 1. Select "Internet Options … " from "Tools" on the menu bar of Internet Explorer ® . The "Internet Options" window will be displayed. 2. Click the [Delete Files … ] button in the "Temporary Internet files" section on the [General] tab. • The firewall [...]

For U.S., Canadian and Puerto Rican fields: Panasonic System Solutions Company, Unit Company of Panasonic Corporation of North America www.panasonic.com/business/ For customer support, call 1.800.528.6747 Three Panasonic Way 2H-2, Secaucus, New Jersey 07094 Panasonic Canada Inc. 5770 Ambler Drive,Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 h[...]