Panasonic KX-P7305 Bedienungsanleitung

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277

Zur Seite of

Richtige Gebrauchsanleitung

Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung Panasonic KX-P7305 an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von Panasonic KX-P7305, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.

Was ist eine Gebrauchsanleitung?

Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung Panasonic KX-P7305 die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.

Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung Panasonic KX-P7305. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.

Was sollte also eine ideale Gebrauchsanleitung beinhalten?

Die Gebrauchsanleitung Panasonic KX-P7305 sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts Panasonic KX-P7305
- Den Namen des Produzenten und das Produktionsjahr des Geräts Panasonic KX-P7305
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts Panasonic KX-P7305
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen

Warum lesen wir keine Gebrauchsanleitungen?

Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von Panasonic KX-P7305 zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von Panasonic KX-P7305 und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service Panasonic finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von Panasonic KX-P7305 zu überspringen, wie es bei der Papierform passiert.

Warum sollte man Gebrauchsanleitungen lesen?

In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts Panasonic KX-P7305, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.

Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von Panasonic KX-P7305 widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.

Inhaltsverzeichnis der Gebrauchsanleitungen

  • Seite 1

    This section contains inf orm ation on caution s, par ts identification, loading media and printing and printer setup (Windo ws & Mac). This section contains inf orm ation on cl eaning th e pr inter , re placing supplies, clearing jams, troub leshooting, error me ssages , repac king and specifications of the printer , media to be u sed and inte[...]

  • Seite 2

    2 Thank you for p urchasing a P anasonic Laser Printer . W e are sure it will meet you r printing needs and giv e you ma ny y ears of productiv e and efficient use. Printing in PCL and P ostScript In addition to printing in the PCL Emulation or P ostScript® Emulation f or Microsoft® Windows® operating system, it also provides compatibility f o r[...]

  • Seite 3

    3 Po w e r S a v i n g (see “Remote Control P anel” on page 28 in “Settings and Pr inting”) Sav es energy while the printer is idle. Remote Contr ol P anel (see “Remote Control P anel” on page 28 in “Settings and Printing”) Suppor ts making changes to the printer’ s defaul t settings f o r compatib ility with application software [...]

  • Seite 4

    4 •D e s t i n y TM , P ageStyler TM and LaserAct TM are trademarks of Destiny T echn olog y Cor poration. • Microsoft, Windo ws, Windo ws NT and Windows Se r ver are either registere d trademarks or trademarks of Microsoft Corporation in the United States and/or other countries . • Adobe, the Adobe logo , Acrobat, the Acrobat logo , Adobe T [...]

  • Seite 5

    5 Screen shot(s) reprinted with permission from Microsoft Cor poration. Acrobat® Reader Cop yr ight © 1987-2001 Adobe Systems Incorporated. All rights reser ved. LaserAct TM 6 Cop yright © 2002, Destiny T echnolog y Cor p . V er . 2.0 All Rights Reserved. P ageStyler TM II Cop yright © 2002, Destiny T echnolog y Cor p. V er . 1.0 All Rights Res[...]

  • Seite 6

    Settings and Printing Settings and Printing Network Maintenance and Spec. 1 Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Contents of Basics Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

  • Seite 7

    Contents of Basics Section Macintosh Windows Basics Basics 2 Basics Contents of Basics Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Part Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

  • Seite 8

    Cautions Macintosh Windows Basics Basics 3 T o a void machine malfunction, do not use the equipment under the f ollowing conditio ns: Cautions[...]

  • Seite 9

    Cautions Macintosh Windows Basics Basics 4 ■ Static Electricity Damage T o pre v ent static electricity damage to any of the f ollowing components, touch a grounded metal surf ace, such as the printer’ s bare metal fr ame prior to touching the component. • Interf ace connectors : parallel, USB, conne ctor f or 2nd f eeder and network (KX-P731[...]

  • Seite 10

    Pa r t N a me s Macintosh Windows Basics Basics 5 ■ Fr ont Side View Rear Side Vie w Pa r t N a m e s Manual f eed ( see pages 9 , 21 ) Media tra y ( see pages 9, 13 ) Printer panel ( see page 6 ) P aper support ( see pages 17, 21 ) Output tra y Fr o n t c o v e r P aper le vel indicator ( see pages 15 ) USB interf ace connector ( see page 61 in [...]

  • Seite 11

    Printer P anel Macintosh Windows Basics Basics 6 Three indicators sho w the f ollowing printer’ s status. : Indicator is lit. : Indicator is turned off. : Indicator is blinking. * 1 The status ma y be diff erent depending on the printer’ s condition. Printer P anel Indicator s Printer St atus Printer is warming up (the three indicator s light o[...]

  • Seite 12

    Printer P anel Macintosh Windows Basics Basics 7 : Indicator is lit. : Indicator is turned off. : Indicator is blinking. * 1 The status ma y be diff erent depending on the printer’ s condition. Printer St atus On: 0.5 s Off: 0.5 s Front cover is open. RAM overflow or Overrun has occurred. See “Maintenance and S pecifications” for troubleshoot[...]

  • Seite 13

    Printer P anel Macintosh Windows Basics Basics 8 The printer ex ecutes the f ollowing action depen ding on the printer status by pressing this butt on. : Indicator is lit. : Indicator is blinking. : Indicator is turned of f. * 1 The status ma y be diff erent depending on the printer’ s condition. PRINT / RESET Button Printer St atus * 1 T o recov[...]

  • Seite 14

    About Media Macintosh Windows Basics Basics 9 See the tab les below f or av ailab le media. F or the notes and detailed media specificatio n, ref er to see “Media” on page 53 in “Maintenan ce and Specifications”. ❍ : suppor ted X : not suppor ted * 1 Cotton paper and thic k paper cannot be us ed f or dupelx printing and printing from 2nd [...]

  • Seite 15

    About Media Macintosh Windows Basics Basics 10 X : not suppor ted NO TE • A utomatic duple x pr inting can only be perf or med on plain paper [75 – 90 g /m 2 (20 – 24 lb .)] from the media tra y or 2nd f eeder ( option). F or detailed inf ormation, see “Duplex Printing” on page 58 , 96 or 114 . * 1 When using recycled paper , select Plain[...]

  • Seite 16

    Loading Media and Printing Macintosh Windows Basics Basics 11 See the setup guide(s) f or the follo wing instructions. • Installing the toner cartr idge and drum unit • Connecting cab les • Installing the printer softw are The media is printed out to the output tr a y (top of the printer). When using thic k paper [106 - 165 g /m 2 (29-44 lb .[...]

  • Seite 17

    Loading Media and Printing Macintosh Windows Basics Basics 12 The image (print area) is printed a bit smaller than the media size . 4.2 mm (0.17 ″ ) is required from the top , bottom and sides margins. Y ou ma y need to adjust the page margins in the application software to match the p rint area. Marg ins and Print Area 4.2 mm (0.17 ″ ) 4.2 mm [...]

  • Seite 18

    Loading Media and Printing Macintosh Windows Basics Basics 13 1 Pull the media tra y out of the pr inter . 2 Pinch the media guides and slide them to the appro ximate width ( 1 ) and length ( 2 ) of the media. Using the Media T ra y 1 2[...]

  • Seite 19

    Loading Media and Printing Macintosh Windows Basics Basics 14 NO TE • When loading legal paper , slide the length guide unit ( 2 ) to e xtend while pressing the stopper ( 1 ). • If the media guide is remo v ed, slide it back in. • If the metal plate is in the up position, the media tr a y cannot be inser ted into the printer . Push the metal [...]

  • Seite 20

    Loading Media and Printing Macintosh Windows Basics Basics 15 3 T ap the media stack on a le vel surf ac e to av oid medi a jams or ske wed printing. NO TE • Be careful not to leav e fingerpr ints on the media, which can result in a smudged print. • Reusing media (used paper or jammed paper) that has b een f ed through the printer once can redu[...]

  • Seite 21

    Loading Media and Printing Macintosh Windows Basics Basics 16 NO TE • Most media has instructions recomm ending the side to be printed first. • Do not mix diff erent types or thicknesses of media in the media tra y at one time; this ma y cause a j am. • Loading media e xceeding the designated sheets ma y cause a media jam or shifting of print[...]

  • Seite 22

    Loading Media and Printing Macintosh Windows Basics Basics 17 7 Raise the paper suppor t so that the media is not dropped from the output tra y . • It is recommended to print en velope s with the rear cov er of the printer open to av oid curling or wrinkles. •When y ou notice some straight line s on the projected image on the screen (OHP), it i[...]

  • Seite 23

    Loading Media and Printing Macintosh Windows Basics Basics 18 8 Specify the printer’ s dr iver setti ng depending on the oper ating system. For Win dows ®* 1 (1) Displa y the print window in the application softw are. (2) Select Panasoni c KX-P7305 PCL6, P anasonic KX-P7305 PS, P anasonic KX- P7310 PCL6 or P anasonic KX-P7310 PS prin ter . (3) C[...]

  • Seite 24

    Loading Media and Printing Macintosh Windows Basics Basics 19 (5) Clic k [OK] and print a document. • If you opened the rear cov er at step 7, be sure to remov e the media e very time media is printed out. For Mac OS 8.5 - Mac OS 9.2 (1) Open a document to print. (2) Select P age Setup… from the application’ s File menu. (3) Select you r pr i[...]

  • Seite 25

    Loading Media and Printing Macintosh Windows Basics Basics 20 For Mac OS X 10.1 - Mac OS X 10.2 (1) Open a document to print. (2) Select P age Setup... from the applicatio n’ s File menu. (3) Select y our printer from the Format for men u. (4) Specify the paper siz e (P age Attributes) and clic k [OK] . (5) Select Print... from the application’[...]

  • Seite 26

    Loading Media and Printing Macintosh Windows Basics Basics 21 The manual f eed ser ves as an additio nal tra y f or loading any type of media t hat ranges in siz e from 76.2 mm x 127 mm to 216 mm x 356 mm (3 ″ x 5 ″ to 8.5 ″ x 14 ″ ). When using thic k paper [106 – 165 g /m 2 (29 – 44 lb .)] or labels, use the manual f eed. 1 Raise the [...]

  • Seite 27

    Loading Media and Printing Macintosh Windows Basics Basics 22 3 Inser t media with the printing side up into the manual f e ed while adjusting the media guides to the media width. The inser ted media is slightly f ed into the manual f eed automatically . • Be sure to inser t media into the manual f eed one at a time. Printing side up P aper / Lab[...]

  • Seite 28

    Loading Media and Printing Macintosh Windows Basics Basics 23 4 Specify the printer dr iver’ s setti ng depending on the operating system. For Win dows (1) Displa y the print window in the application softw are. (2) Select P anasonic KX-P7305 PCL6, P anasonic KX-P7305 PS, Panason ic KX- P7310 PCL6 or P anasonic KX-P7310 PS prin ter . (3) Click Pr[...]

  • Seite 29

    Loading Media and Printing Macintosh Windows Basics Basics 24 For Mac OS 8.5 - Mac OS 9.2 (1) Open a document to print. (2) Select P age Setup… from the application’ s File menu. (3) Select you r pr inter from the Format f or menu. (4) Specify the paper siz e (P age Attributes) and clic k [OK] . (5) Select Print... from the application’ s Fil[...]

  • Seite 30

    Macintosh Windows Basics Basics Index 25 A AC inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 C Connector for 2nd feeder . . . . . . . . . . . . . 5 E Envelope . . . . . . . . . . . . . . . . . 9, 10, 16, 22 ERROR indicator . . . . . . . . . . . . . . . . . . . . 6 F Front cover . . . . . . . . . . . . . . . . . . . . . . . . 5 I Indi[...]

  • Seite 31

    Macintosh Windows Basics Basics Index 26 U USB interface . . . . . . . . . . . . . . . . . . . . . . 5 V Ventilation space . . . . . . . . . . . . . . . . . . . . 4[...]

  • Seite 32

    Contents of Windows Sectio n Macintosh Basics Windows Windows[...]

  • Seite 33

    Remote Contr ol P anel Macintosh Basics Windows Windows 28 The Remote Control P anel can be used f or the f ollowing. 1. Used to display the option inf or mation installed in the printer ( see “Inf ormation” on page 43 ). 2. Used to change the printer’ s setting ( see “Changing the Settings” o n page 31 ). 3. Used to pr int the demo page,[...]

  • Seite 34

    Remote Contr ol P anel Macintosh Basics Windows Windows 29 1 Click [Star t] , mov e the pointer to Pr ograms or All Programs , Pa n a so n i c and P anasonic KX-P73 05 and KX-P7310 , then click Remote Contr ol Pa n e l . • If more than one printer is connected to y our computer , the screen prompts to select the printer . Click the desired printe[...]

  • Seite 35

    Remote Contr ol P anel Macintosh Basics Windows Windows 30 2 F or inf or mation on the f ollowing menus , see the page indicated. ■ T ool Menus File menu ( see page 32 ) T ool menu ( see page 32 ) Option menu ( see page 33 ) Help menu ( see page 33 ) ■ T ree Menus Pa p e r ( see page 38 ) Quality ( see page 39 ) Font ( see page 39 ) Netw ork* 1[...]

  • Seite 36

    Remote Contr ol P anel Macintosh Basics Windows Windows[...]

  • Seite 37

    Remote Contr ol P anel Macintosh Basics Windows Windows[...]

  • Seite 38

    Remote Contr ol P anel Macintosh Basics Windows Windows 33 ■ Option menu Interface If more than one printer are connected to the computer , this menu is activa ted. Y ou can select the printer to use with Remote Control P anel. ■ Help men u About Displa ys the v ersion of the Remote Control P anel software. Help ( ) Displa ys the help menu how [...]

  • Seite 39

    Remote Contr ol P anel Macintosh Basics Windows Windows 34 Bef ore y ou attempt to change an y settings, ch eck the f actor y default settings in the f ollowing tabl e. F or the information of each menu, see “Outline f or Menus” on pag e 38 . *Indicates the def ault setting. * 1 If an optiona l 2nd f eeder is installed on the printer , the Medi[...]

  • Seite 40

    Remote Contr ol P anel Macintosh Basics Windows Windows 35 * 1 If an optional 2nd fee der is installed on the printer , these menus are displa yed. Menu Selection 1 / Inf ormation Selection 2 Pa p e r Upper T ra y* 1 No assignment* Letter Legal Executiv e A4 A5 Com-9 Env Com-10 Env Monarc h Env B5 A6 DL Env C5 Env Low er T ra y* 1 No assignment* Le[...]

  • Seite 41

    Remote Contr ol P anel Macintosh Basics Windows Windows 36 Menu Selection 1 / Inf ormation Selection 2 Quality Density Normal* (Lightest – Darkest) F ont F ont Number 0* (0 – 54) F ont pitch 10.00* (0.44 – 99 .99) F ont height 12.00* (4.00 – 99 9.75) Symbol set PC8* Network (KX-P7310 only) MA C address xx:xx:xx:xx:xx:xx Printer name KX-P731[...]

  • Seite 42

    Remote Contr ol P anel Macintosh Basics Windows Windows 37 Menu Selection 1 / Inf ormation Selection 2 Others P ower s av e mode 5* (2, 5, 10, 15, 30, 60 ) A uto con tinues Off* On P age Protection Off* On I/O timeout setting 60* (5 – 300) Printer Emulation Auto* PCL Language English Fr e n c h German Italian Spanish Inf or mation Controller FW x[...]

  • Seite 43

    Remote Contr ol P anel Macintosh Basics Windows Windows 38 ■ Pa p e r P aper Source Selects the source f eeding media. If the optional 2nd f eeder is installed, Media tra y will be changed to Upper and Lo wer selection is added. Media type Selects the type of med ia loaded in the media tr a y , manual f eed and 2nd f eeder (option). Media size Se[...]

  • Seite 44

    Remote Contr ol P anel Macintosh Basics Windows Windows 39 Front T op Calibration Adjusts the top margin of printing. Front Left Calibration Adjusts the left side margin of printing. Back T op Calibration Adjusts the bac k top margin of printing. Back Left Calibration Adjusts the bac k left side margin of printing. ■ Quality Density Adjusts the d[...]

  • Seite 45

    Remote Contr ol P anel Macintosh Basics Windows Windows 40 ■ Netw ork (KX-P7310 only) The network menu is displa yed f or the KX-P7310 only . MA C address Displa ys the MA C address . MA C address is a priv ate number assigned to each network device. Printer name Displa ys the printer name. Protocol (TCP/IP) Enabl es TCP/IP by selecting On. DHCP [...]

  • Seite 46

    Remote Contr ol P anel Macintosh Basics Windows Windows 41 ■ Adjustment to Media Print quality may v ar y do to moisture in the media. It enab les adjustment to the printer’ s setting corresponding to the con dition of media. T o get better print quality , If media has high moisture , set it f or + v alue (+1, +2 or +3). If media has low moistu[...]

  • Seite 47

    Remote Contr ol P anel Macintosh Basics Windows Windows 42 ■ Other s P ower save mode T o conserve energ y and oper ating cost, this printer is provided with a progr ammable pow er sav e feature . The printer is factory set with the power sa ve f eature turned on to comply with E NERGY S TA R ® requirement. The printer enters the P owe r Sav e m[...]

  • Seite 48

    Remote Contr ol P anel Macintosh Basics Windows Windows 43 ■ Inf ormation Controller FW Displa ys the controller fir mware v ersion. Engine FW Displa ys the engine fir mware v ersion. P age Styler2 Displa ys the software v ersion for P ostScript. Memory Siz e Displa ys the total memor y size installed in the printer . Option Cassette Displa ys wh[...]

  • Seite 49

    Setting the Printer Driver Macintosh Basics Windows Windows 44 It is possib le to set the printer b y using the printer proper ties window . It can be displa yed from Windo ws (see below) or fro m an application ( see page 46 ). ■ Setting the Printer from Windo ws: When setting the printer b y using printer proper ties windo w under Windows , the[...]

  • Seite 50

    Setting the Printer Driver Macintosh Basics Windows Windows 45 4 Click a tab to vie w the f eatures. The e xplanation of the driver’ s setting menu can be read by clic king it with the right mouse b utton. (tab in Windows 98) • T abs are diff erent in Windows NT 4.0 / Windo ws 2000 / Windows XP / Windows Ser v er 2003. • F or Windows NT 4.0 /[...]

  • Seite 51

    Setting the Printer Driver Macintosh Basics Windows Windows 46 ■ Setting the Printer fr om an Application: When setting the printer using the printer proper ties window from an application , the setting is return ed to the def ault setting if the application is closed. F or e xample, to print a document creat ed in Microsoft W ordP ad in Windo ws[...]

  • Seite 52

    Setting the Printer Driver Macintosh Basics Windows Windows 47 1 Displa y the printer proper ties window ( see page 44 ). 2 P erf or m the method [A] or [B] . [A] Clic k the desired menu with the right mouse b utton and clic k the displa yed menu. Or [B] Clic k [?] butt on and click the desired menu. Displa ying Help of the Printer Properties Windo[...]

  • Seite 53

    Setting the Printer Driver Macintosh Basics Windows Windows 48 The printer driver cannot automatically detect that an option ha s been installed in the printer . After installing an option in the printer , you m ust define it whether an option is installed or not. 1 Click [Start] , mov e the pointer to Settings , then click Printer s . The Printers[...]

  • Seite 54

    Setting the Printer Driver Macintosh Basics Windows Windows 49 ■ For P anasonic KX-P7305 PS or P anasonic KX-P7310 PS [In Windows 95 / Windows 98 / Wi ndows Me] (1) Clic k the Dev ice Options tab . (2) Clic k the option in the Installable options and then select Installed , Not Installed or installed memor y in the Change setting f or bo x. [In W[...]

  • Seite 55

    Setting the Printer Driver Macintosh Basics Windows Windows 50 The media can be f ed from the tra y corresponding to the paper siz e of the document by assigning the media siz e to the tra y . A utoSelect T ray must b e selected f or paper source to use the f eature. The setting of the Remote Control P anel will be taken o v er by the setting of th[...]

  • Seite 56

    Setting the Printer Driver Macintosh Basics Windows Windows 51 ■ Using the Printer Driver 1 Click [Start] , mov e the pointer to Settings , then click Printer s . The Printers window is displa yed. • F or Windo ws XP Professional / Windo ws Ser ver 200 3, click [Start] , then click or double clic k Printers and Fax es . • F or Windo ws XP Hom[...]

  • Seite 57

    Setting the Printer Driver Macintosh Basics Windows Windows 52 Enables to share the printer ov er the network. ■ For Windows 95 / Wi ndows 98 / Windo ws Me 1 Click [Start] , mov e the pointer to Settings , then click Printer s . 2 Click the P anasonic KX-P7305 PC L6 , P anasonic KX-P7305 PS , P a nasonic KX-P7310 PCL6 or P anasonic KX-P7310 PS ic[...]

  • Seite 58

    Setting the Printer Driver Macintosh Basics Windows Windows 53 ■ For Windows NT 4.0 / Windo ws 2000 / Windows XP / Window s Server 2003 1 Click [Start] , mov e the pointer to Settings , then click Printer s . The Printers window is displa yed. • F or Windo ws XP Professional / Windo ws Ser ver 200 3, click [Start] , then click or double clic k [...]

  • Seite 59

    Setting the Printer Driver Macintosh Basics Windows Windows 54 10 Click [OK] . The Windows 95/ Windows 98 Printer Drivers windo w is displa yed. 11 Click [Bro wse] . The Locate File window is displa yed. 12 Inser t the supplied printer CD- ROM into the CD-R OM dr iv e. 13 Select CD-ROM drive . 14 Open Win9x and open English , then select PCL file. [...]

  • Seite 60

    Setting the Printer Driver Macintosh Basics Windows Windows 55 Specifies ho w many pages of a document to print on one piece of paper . 1 Open a document and displa y the print window in your application. 2 Select P anasonic KX-P7305 PCL6 , Panasonic KX-P7305 PS , P a nasonic KX-P7310 PCL6 or P anasonic KX-P7310 PS pr inter and click Pr oper ties ([...]

  • Seite 61

    Setting the Printer Driver Macintosh Basics Windows Windows 56 Y ou can sav e the settings of the PCL printer driver (f or e xample, printing on a label or env elope etc.) using the Profile tab and retrie ve it when necessary . 1 Open a document and displa y the print window in your application. 2 Select P anasonic KX-P7305 PCL6 or Panasonic KX-P73[...]

  • Seite 62

    Setting the Printer Driver Macintosh Basics Windows Windows 57 1 Profile Nam e Displa ys the sa ved profile names. Profile s (DEF A UL T and DRAFT) are registered by def ault and cannot be cha nged or deleted. Y ou can set the driver b y selecting the profile name sa ved in adv ance. 2 Save as… Enables to register a new profile or change the sa v[...]

  • Seite 63

    Setting the Printer Driver Macintosh Basics Windows Windows 58 When perf orming automatic duple x printing, paper must be f ed from the media tra y / upper tra y or lower tr a y (option). Manua l f eed cannot be used f or automatic duple x pr inting. NO TE • The f ollow ing paper must be used. Otherwise , it ma y cause wrinkles or paper jam. Plai[...]

  • Seite 64

    Setting the Printer Driver Macintosh Basics Windows Windows 59 5 T ur n the duplex print f eature on depending on the pri nter driver . ■ For P anasonic KX-P7305 PCL6 or P anasonic KX-P7310 PCL6 (1) Clic k on the Flip on long edge or Flip on short edge check b utton f or Duplex menu in t he Pa g e S e tu p tab . ■ For P anasonic KX-P7305 PS or [...]

  • Seite 65

    Setting the Printer Driver Macintosh Basics Windows Windows 60 ■ Setting W atermarks 1 Open a document to perf orm water mar k printing and display the print window in y our application. 2 Select P anasonic KX-P7305 PCL6 or Panasonic KX-P7310 PCL6 printer and click Pr oper ties ( [Preferences] f or Windows XP / Windows Ser ver 2003). The printer [...]

  • Seite 66

    Setting the Printer Driver Macintosh Basics Windows Windows 61 1 W atermark Enables the selected watermark in the box. The selected watermar k is printed ov er a document. Clic k the W ater mar k bo x and select the desired one. T OP SECRET , CONFIDENTIAL, DRAFT , ORIGINAL and COPY ar e registered b y def ault. Y ou can also create a ne w watermar [...]

  • Seite 67

    Setting the Printer Driver Macintosh Basics Windows Windows 62 2 Edit • Te x t : Enables to create/edit a w atermar k te xt by ent er ing/editing the te xt in the T e xt bo x. • Size : Enables to set the f ont size of the watermark. Drag each slider left or ri ght or click or . • Angle : Enables to angle the watermar k. Drag each slider left [...]

  • Seite 68

    Setting the Printer Driver Macintosh Basics Windows Windows 63 ■ Printing a W atermark The f ollowing is the e xample to pr in t the watermar k COPY on all pages. 1 Open a document to print wi th the watermar k and display the print window . 2 Select the P anasonic KX-P7305 PCL6 or P anasonic KX-P7310 PCL6 printer . 3 Click Pr oper ties ( [Prefer[...]

  • Seite 69

    Setting the Printer Driver Macintosh Basics Windows Windows 64 Y ou can use the Overla y f eature to: • Incor por ate your lette rhead on the first page of a b usiness letter . • Pr int your logo at the bo ttom of each page of a set of presentation slides . • O v erlay the w ord “Confidential” on e v er y page of an impor tant document. ?[...]

  • Seite 70

    Setting the Printer Driver Macintosh Basics Windows Windows 65 1 Using an application such as P aintbr u sh or CorelDRA W , create and sav e the ov er la y file that you w a nt to ov erlap on a document. 2 V erify the ov erla y data by printing it. 3 Displa y the print win dow and select the P anasonic KX-P7305 PCL6 or P a nasonic KX-P7310 PCL6 pri[...]

  • Seite 71

    Setting the Printer Driver Macintosh Basics Windows Windows 66 7 Enter a ne w file name or the same fi le name (Max. 8 ch aracters) as used at step 1 in the file name bo x. The file is sav ed in the follo wing director y . Windows 95 / Windows 98 / Windo ws Me: Windo ws (OS System)SystemKme Windows NT 4. 0 / Windows 2000 / Windo ws XP / Windows S[...]

  • Seite 72

    Setting the Printer Driver Macintosh Basics Windows Windows 67 16 Clic k on the check bo x of your desired selection. Print With Overlay: The ov er la y file is ov erlapped only on the first page ( Overlay 1st Pag e ) or all pages ( Overla y All Pa ges ) of a document. Print Cover P age: The ov er la y file is printed as the cov er page bef ore the[...]

  • Seite 73

    Status Display Macintosh Basics Windows Windows 68 The Status Displa y will show the f ollowing inf ormations. When using the KX-P7310 an d the printer is directly connected to the network with the netw ork interface , the Status Displa y shows th e network setting inf ormation. • Error messages • Recov er y information • Printer general inf [...]

  • Seite 74

    Status Display Macintosh Basics Windows Windows[...]

  • Seite 75

    Status Display Macintosh Basics Windows Windows 70 1 This bo x show s the printer status. 2 This bo x shows t he printer is connected to local or network. If the printer is connected to the network, the printer’ s IP address or ser ver name will be displa yed. 3 The loaded media, printer’ s information, error recov er y and network information [...]

  • Seite 76

    Status Display Macintosh Basics Windows Windows 71 T o displa y the More Inf or mation window , click on the More Information chec k bo x in the Status Displa y window . More Inf orm ation window con sists of two tabs: Inf ormation and Recovery Inf ormation . ■ Information tab Shows th e media inf or mation that set with the Remote Control P anel[...]

  • Seite 77

    Status Display Macintosh Basics Windows Windows 72 ■ Printer Inf ormation T a b Shows the firmware v ersion and the inf ormation of the installed options. Serial Number Displa ys the printer’ s serial number . Contr oller FW V ersion Displa ys firm ware v ersion of the pr inter’ s controller board. Engine R OM V ersion Displa ys v ersion of t[...]

  • Seite 78

    Status Display Macintosh Basics Windows Windows 73 ■ Netw ork tab (KX-P7310 only) Shows the netw ork information of the printer : IP address, MA C address, etc. Option menus appear b y clicking the + button of the Network Inf or mation in the left pane. The inf orm ation appears in the right pane b y clicking the option me nu. General MA C Addres[...]

  • Seite 79

    Status Display Macintosh Basics Windows Windows 74 AppleT alk Protocol AppleT alk protocol is enab led or disab led. Printer Name Printer name (KX-P7310-######) on the AppleT alk. ###### indicates the last 3 byte of MA C address of the printer . Zone Name Zone name of the AppleT alk. SMB Inform ation Protocol NetBEUI protocol is enab led or disab l[...]

  • Seite 80

    Status Display Macintosh Basics Windows Windows 75 ■ Reco very Information tab 1 Shows correctiv e action for the printer error with animation. 2 Shows correctiv e instr uctions or status. 3 Clic king this button star ts the animation. When the animation is star ted, the star t button is changed to bu tton. Clicki ng button will stops the animati[...]

  • Seite 81

    Status Display Macintosh Basics Windows Windows 76 1 Status Display T ype Stay: Clic king on the Sta y chec k button runs the Status Displa y program and places the icon on the ta sk bar when star ting Windows . The icon is b linking on the task bar when a printer error has occurred. T o displa y the Status Displa y window , click th e blinkin g ic[...]

  • Seite 82

    Status Display Macintosh Basics Windows Windows 77 3 Printer Interface Enables the printer status by clic king [Select...] ( see “Selecting the Printer to Get the Status” on page 78 ). If the printer is connected with the network interf ace cable , the printer’ s IP address or computer name is entered in the Server Name bo x. NO TE • If the[...]

  • Seite 83

    Status Display Macintosh Basics Windows Windows 78 1 Click [Select...] in the Setup f or Status Displa y window . Search De vice window appea rs. Selecting the Printe r to Get the Status[...]

  • Seite 84

    Status Display Macintosh Basics Windows Windows 79 2 Specify the destination f or search ing b y clicking on the chec k button. ALL: Searches all KX-P7310 printers, local and netw ork. Local: Searches the local printers connected to y ou computer . Server name: Searches the name of the server compu ter sharing a printer . (1) Clic k on the Ser v er[...]

  • Seite 85

    Macintosh Basics Windows Windows Index 80 A Adjustment to media . . . . . . . . . . . . . . . . 36 Auto continue . . . . . . . . . . . . . . . 37, 42, 72 B Back Left Calibration . . . . . . . . . . . . . 35, 39 Back Top Calibration . . . . . . . . . . . . . 35, 39 C Copies . . . . . . . . . . . . . . . . . . . . . . . . 35, 38 D Density . . . . . .[...]

  • Seite 86

    Macintosh Basics Windows Windows Index 81 P Page Protection . . . . . . . . . . . . . . 37, 42, 72 Page Styler2 . . . . . . . . . . . . . . . . . . . 37, 43 Paper Size . . . . . . . . . . . . . . . . . . . . . 34, 38 Paper Source . . . . . . . . . . . . . . . . . . 34, 38 Power save . . . . . . . . . . . . . . . . . 37, 42, 72 Print Page Border . .[...]

  • Seite 87

    Contents of Macintosh Section Macintosh Macintosh Windows Basics 82 Macintosh Contents of Macintosh Section . . . . . . . . . . . . . . . . . . . . . . . . . 82 Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) . . . . . . . . 83 [A] Selecting the Printer in the Chooser . . . . . . . . . . . . . . . . . . . . . . 83 [B] Selecting the Printer Con[...]

  • Seite 88

    Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) Macintosh Macintosh Windows Basics 83 Once you h av e installed the printer driver f o r P ostScr ipt, select the printer as the current printer in the Chooser desktop accessor y or printer icon on the desktop screen. If the printer is connected to the network with the netw ork interface, select [...]

  • Seite 89

    Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) Macintosh Macintosh Windows Basics 84 After the setting f or USB is completed, KX-P7 305 or KX-P7310 icon is created on y our desktop screen. T o select the printer connected with USB , 1 Click the KX-P7305 or KX-P7310 icon. 2 Click Printing menu and select Set Default Printer . 1 Open the file y[...]

  • Seite 90

    Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) Macintosh Macintosh Windows Basics 85 3 Select yo ur pr inter from the Format for . 1 Format f or Select the printer to specify the printer driver . 2 P aper Selects a diff erent paper size L etter , Legal, A4, B5 (ISO), Executiv e, A5, A6, Com9 (Env elope #9), Com10 (En ve lope #10), Monarch, DL[...]

  • Seite 91

    Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) Macintosh Macintosh Windows Basics 86 1 Open the file y ou want to pr int from within the application. 2 Select Print ... from the application’ s File menu. 3 Select the KX-P7305 or KX-P7310 pr inter from the Printer menu. 4 Click General menu and select the desired menu. General menu ( see pag[...]

  • Seite 92

    Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) Macintosh Macintosh Windows Basics 87 1 Copies Determines the number of copies of the document will be printed. 2 Collated Clicking on this check bo x pr ints the copies of the entire docume nt a number of times, from 1st page to the last page . If you p r int 3 copies of a 5 pages do cument, pri[...]

  • Seite 93

    Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) Macintosh Macintosh Windows Basics 88 4 P aper Source • All pages fr om Enables to select the tra y feeding media. If th e optional 2nd f eeder is installed in y our printer and defined it in the Installab le Options men u ( see “Setting the Installab le Options ” on page 93 ), Option Casse[...]

  • Seite 94

    Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) Macintosh Macintosh Windows Basics[...]

  • Seite 95

    Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) Macintosh Macintosh Windows Basics 90 4 Print on Both Sides Enables to print on both sides of paper by clic king on the chec k bo x and selecting the binding style. T o perf or m the duplex pr inting, the f ollowing media and paper source must be set. T o perf or m duple x printing, see “P erfo[...]

  • Seite 96

    Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) Macintosh Macintosh Windows Basics[...]

  • Seite 97

    Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) Macintosh Macintosh Windows Basics 92 3 Media T ype Selects the type of media. * 1 Cotton P aper cannot be used f or duple x printing. 4 Fit to P age Document is printed in the size fitted to t he media size . P aper Sour ce Media T ype Media T ra y Plain P aper , Cotton P aper* 1 , T ransparency[...]

  • Seite 98

    Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) Macintosh Macintosh Windows Basics 93 The printer driver installed on th e computer cannot automatica lly detect that an option has been installed in the printer . After installing an option in the printer , you must define whether an option is installed or not with Chooser or printer icon fo r U[...]

  • Seite 99

    Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) Macintosh Macintosh Windows Basics 94 6 Clic k the option installed in your printer and select Installed or total installed memor y . 7 Click [OK] . 8 Click [OK] .[...]

  • Seite 100

    Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) Macintosh Macintosh Windows Basics 95 Setting the options with printer icon fo r USB 1 Clic k the pr inter icon f or USB on the desk top screen. 2 Click the Printing menu and select Change Setup... . • If Change Setup... men u does not appear , see the note below . 3 Select the installed option[...]

  • Seite 101

    Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) Macintosh Macintosh Windows Basics 96 1 Load paper into the Media T r a y or Option Cassette* 1 . • The follo wing paper must be used. Otherwise , it ma y cause wrinkles or paper jam. Media T ype :Plain paper [75 – 90 g /m 2 (20 – 24 lb .)] Pa p e r S i z e :Letter , Legal, A4, B5 or Ex ecu[...]

  • Seite 102

    Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) Macintosh Macintosh Windows Basics 97 11 Click Printer Specific Options men u and select La y out menu. 12 Click on the Print on Both Sides chec k box and clic k y our desired binding style icon. 13 Click [Print] . The document will be automatically printed on both sides of pap er .[...]

  • Seite 103

    Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2 ) Macintosh Macintosh Windows Basics 98 Mac OS X intensiv ely manages adding, deleting, s earching a printer or displa ying the printer status, etc. with the application Print Center . Bef ore y ou can use a printer , you must add the pr inter in the Print Center . Y ou will need to selec[...]

  • Seite 104

    Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2 ) Macintosh Macintosh Windows Basics 99 Be sure the printer is connected to the computer with the USB interf ace cabl e and tur ned it on. 1 Open the Print Center and choose Add Printer ... from the Printers menu. 2 Choose USB as the connection type, and click KX-P7305 or KX-P7310 . 3 Con[...]

  • Seite 105

    Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2 ) Macintosh Macintosh Windows Basics[...]

  • Seite 106

    Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2 ) Macintosh Macintosh Windows Basics 101 1 P aper Size Selects a diff erent paper siz e. The f ollo wing paper sizes can b e selected. US Letter , US Legal, A4, B5 (ISO), Ex ecutive En v elope, A5, A6, Com9, #10 Env elope , Monarch Env elope, Long En v elope, C5 En velope . 2 Orientation [...]

  • Seite 107

    Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2 ) Macintosh Macintosh Windows Basics 102 1 Open a file to perf or m printing in your application. 2 Select Print... from y our application’ s File menu. 3 Select y our pr inter from the Printer menu. 4[...]

  • Seite 108

    Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2 ) Macintosh Macintosh Windows Basics 103 Duple x Allows y ou to set the duple x pr inting ( see page 106 ). • Pr int on Both Sides • Binding Output Options Allows y ou to output a document to file ( see page 107 ). •S a v e a s F i l e •F o r m a t P aper Feed Allows you to select[...]

  • Seite 109

    Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2 ) Macintosh Macintosh Windows Basics[...]

  • Seite 110

    Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2 ) Macintosh Macintosh Windows Basics 105 1 P ages per Sheet Specifies ho w many pages of y our document to print on one she et of paper . 2 Lay out Direction Specifies the la yout of the pages per shee t. 3 Border Sets the type of line to appea r around the page. Setting the La y out Menu[...]

  • Seite 111

    Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2 ) Macintosh Macintosh Windows Basics 106 1 Print on Both Sides P erforms the automatic duple x printing by clic king on the chec k bo x and selecting the binding style. T o perf orm automatic duple x pr inting, the f ollowin g media and paper source must be set. T o perf or m duple x prin[...]

  • Seite 112

    Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2 ) Macintosh Macintosh Windows Basics 107 1 Save as File Clicking on this check bo x sav es a docum ent as file in the selected f or mat. Clicking of f this check bo x pr in ts a document to the printer . 2 Format Selects the file f ormat (PDF or P ostScript) when saving a document. The a [...]

  • Seite 113

    Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2 ) Macintosh Macintosh Windows Basics 108 1 All pages fr om Selects the tra y fe eding media. If the optional 2nd F eeder is installed in the printer , Option Cassette is a va ilable . When adding printer with the Print Center application, the computer defines options installed to the prin[...]

  • Seite 114

    Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2 ) Macintosh Macintosh Windows Basics 109 •M e d i a T r a y Enables to print on media loaded in the standard tra y of the pr inter . Thick paper [106 – 165 g /m 2 (29 – 44 lb .)] or label cannot be printed with the media tr a y . Their media can be printed with the manual feed . •[...]

  • Seite 115

    Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2 ) Macintosh Macintosh Windows Basics 110 1 Resolution Selects a quality setting. 300x300 dpi , 600x600 dpi or 1200x600 dpi ca n be selected. A higher resolution pro vides better print quality . Howe ver , the throughput speed is diminished. 2 T oner Save Mode Enables to reduce the amount [...]

  • Seite 116

    Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2 ) Macintosh Macintosh Windows Basics[...]

  • Seite 117

    Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2 ) Macintosh Macintosh Windows Basics 112 When adding printer with the Print Center application, the computer defines optio ns installed to the printer automatically . If you install additional o ptions after adding printer , add the printer again (see the in str uctions belo w). 1 Open th[...]

  • Seite 118

    Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2 ) Macintosh Macintosh Windows Basics 113 T o print from a Classic application, the printer driver and PPD file for Mac OS 9 m ust be installed in y our computer , then set the computer and printer (see the “Setup Guide”). 1 Choose P ag e Setup... from the application's File menu [...]

  • Seite 119

    Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2 ) Macintosh Macintosh Windows Basics 114 1 Load paper into the Media T r a y or Option Cassette* 1 . • The follo wing paper must be used. Otherwise , it ma y cause wrinkles or paper jam. Media T ype :Plain paper [75 – 90 g /m 2 (20 – 24 lb .)] Pa p e r S i z e : US Letter , US Legal[...]

  • Seite 120

    Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2 ) Macintosh Macintosh Windows Basics 115 12 Click Printer Features men u and select Duple x menu. 13 Click on the Print on Both Sides chec k bo x and clic k your desired binding style icon. 14 Click [Print] . The document will be auto matically printed on both sides of pages.[...]

  • Seite 121

    Macintosh Macintosh Windows Basics[...]

  • Seite 122

    Macintosh Macintosh Windows Basics Index 117 Printer driver Mac OS 8.5 - 9.2 . . . . . . . . . . . . . . . . 83 Mac OS X 10.1 - 10.2 . . . . . . . . . . . . 98 Printer Features menu . . . . . . . . . . . . . 110 Printer Specific Options menu . . . . . . . . . 91 Printing Duplex . . . . . . . . . . . . . . . . . . . . . . . . 96 R Remaining from . .[...]

  • Seite 123

    Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 1 Replaceable Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Upgrade Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installing the RAM Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

  • Seite 124

    Replaceab le Components Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 2 ■ Supplies When print is f aded or indicators sho w the f ollowing status, the replacement of a supply is needed. * 1 Ref er to the ne xt page. * 2 The printer is sh ipped with a starter toner car tridge, which has half the amount of t oner . (The [...]

  • Seite 125

    Replaceabl e Components Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 3 * 1 A verage lif e is based on an av erage of 5% cov erage of the printable area with repetitiv e printing of 10 pages (Letter / A4 siz e, single sided printing, default density) (ref er to Example: 5% co ver age). The lif e of a toner car tridge is [...]

  • Seite 126

    Upgrade Options Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 4 The f ollowin g upgrade options can be installed in the printer . 2nd Feeder (KX-PMF3) An additional cassette can be u sed by in stallin g this option. Ref er to the installation manual included in the carton box with the option. RAM Board: 16 MB (KX-PEM12) [...]

  • Seite 127

    Upgrade Options Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 5 2 Slide the option cov er and remov e it. 3 Remov e the two screws ( 1 ) and slide the metal plate up while pressing it ( 2 ), then remov e it ( 3 ). 1 1 2 3[...]

  • Seite 128

    Upgrade Options Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 6 4 Connect the RAM board to the f ollo wing connector as illustrated belo w . 5 Align the fringe ( 1 ) and slide the metal plate down while pressing it ( 2 ). 6 F asten the metal plate with the two screws remo ved earlier . 7 Install the option cov er . 8 Plu[...]

  • Seite 129

    Upgrade Options Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 7 If y ou install the RAM board, set the printer driver f or the pr inter’ s installed memor y (see “Defining the Installed Options” on page 48 of “Settings and Printing” in the Operating Instructions). T o set the printer driver in Macintosh, se e ?[...]

  • Seite 130

    Cleaning the Printer Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 8 P er iodic cleaning of the printer is re commended. The frequency o f cleaning is dependent upon the en vironment in which the printer is used. Y ou should clean the pr inter : • at least once a month. • when you replace the toner ca r tridge. • w[...]

  • Seite 131

    Cleaning the Printer Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 9 3 While rotating the pic k up roller , wipe it with a soft cloth that has been moistened with a mild commercial cleaner . 4 Open the front cov er . 5 Lift the drum unit up ( 1 ) and slide it out of the pr inter ( 2 ). •T o a void p ossible toner spill[...]

  • Seite 132

    Cleaning the Printer Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 10 SAFETY CA UTION •It is v er y hot inside the printer ; to av oid personal injur y , do not touch the components illustrated be low . CA UTION • T o prev ent an y damage to the drum unit, obser ve the f ollowing precautions . — Do not touch the dr[...]

  • Seite 133

    Cleaning the Printer Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 11 6 Wipe rollers (A) and (B), and paper chute with a soft cloth that has been moistened with a mild commercial cleaner . •Be sure to remov e the paper dust. NO TE • F ront rollers (A) can be rotated half . Inner ro llers (B) can be rotated to the dir[...]

  • Seite 134

    Cleaning the Printer Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 12 8 Carefully wipe the corona wire of the drum unit by sliding a dr y cotton s w ab from end to end a f e w times. 9 Fir mly inser t the drum unit in the slot of the printer ( 1 ) [inser t the side pins of the drum unit into the groov e (label )]. Push d[...]

  • Seite 135

    Clearing a Jam Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 13 If the printer has frequent media jams , mak e sure that y ou f ollow these guideline s: • Alwa ys use high-quality paper and transp arencies ( see “Media” on page 53 ). • Make sure that y ou load thic k paper [106 – 165 g /m 2 (29 – 4 4 lb .)] o[...]

  • Seite 136

    Clearing a Jam Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 14 When a media f eed error has occurred, cl ear the media f eed error as f ollows: 1 Pull the media tra y out of the pr inter or 2nd feeder (option). 2 T ap the media stack on a le vel surf ac e to av oid medi a jams or ske wed printing. •If a media f eed er[...]

  • Seite 137

    Clearing a Jam Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 15 3 Place the media with t he print side down. •Be sure that the media does not e xceed the limit mark. NO TE • If the metal plate is in the up position b y accident, the media tra y cannot be inserted into the printer . Bef ore loading the media, push dow[...]

  • Seite 138

    Clearing a Jam Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 16 5 Open and close the front cov er to clear the error indication.[...]

  • Seite 139

    Clearing a Jam Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 17 1 Open the front cov er . 2 Lift the drum unit up . Jam at A[...]

  • Seite 140

    Clearing a Jam Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 18 3 Grasp both sides of the jammed media and slo wly pull it out of the printer . 4 Push the drum unit down. 5 Close the front cov er .[...]

  • Seite 141

    Clearing a Jam Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 19 1 Open the front cov er . 2 Lift the drum unit up . Jam at B[...]

  • Seite 142

    Clearing a Jam Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 20 3 Remov e the jam med media from the output tra y . - Or - Open the rear cov er of the pr inter ( 1 ) and remov e the jammed media ( 2 ).[...]

  • Seite 143

    Clearing a Jam Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 21 4 Push the drum unit down. 5 Close the front cov er .[...]

  • Seite 144

    Clearing a Jam Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 22 1 P erf or m the jam reco v er y steps f or Jam at A ( see page 17 ). - Or - 1 Pull the media tra y out of the pr inter . 2 Slowl y pull the jammed media ( 2 ) out of the pr inte r while pushing the center tab ( 1 ) of the jam release pan down. Jam at C 1 Re[...]

  • Seite 145

    Clearing a Jam Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 23 3 Replace the media tra y i nto the printer . 4 Open and close the front cov er to clear the error indication. 2 1[...]

  • Seite 146

    Clearing a Jam Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 24 1 Open the rear cov er of the pr inter ( 1 ) and gr asp both si des of the jammed media and slowl y pull it out of the printer ( 2 ). 2 Open and close the front cov er to clear the error indication. Jam at D 2 1 CAUTION HOT SURFACE 2 1[...]

  • Seite 147

    Clearing a Jam Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 25 1 P erf or m the jam reco v er y steps f or Jam at D ( see pa ge 24 ). - Or - 1 Pull the media tra y out of the pr inter . 2 Slowl y pull the jammed media ( 2 ) out of the pr inte r while pushing the center tab ( 1 ) of the jam release pan down. Jam at E 1 R[...]

  • Seite 148

    Clearing a Jam Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 26 3 Replace the media tra y i nto the printer . 4 Open and close the front cov er to clear the error indication. 2 1[...]

  • Seite 149

    T roub leshooting Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 27 T r oubleshooting Tr o u b l e P ossible Cause Corrective Action The bac kground of the images is printed in gra y . The toner car tridge has reached the end of usef ul life . Replace th e toner car tridge. The drum unit has reached the end of useful life[...]

  • Seite 150

    T roub leshooting Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 28 Small dots are printed at the diff erent position from the original Media is wet or dry . Set the Adjustment to media setting f or – v alue (–1, –2 or –3) ( see “Adjustment to Media” on page 41 in “Settings and Printing”). T oner spots app[...]

  • Seite 151

    T roub leshooting Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 29 A white or b lack spots appear in inter vals o f 94 mm (3.7 ″ ). P aste/Glue of a label o r dust is attached to t he photosensitiv e drum. Wipe the photosen sitiv e drum ( see “Cleaning the Photosensitiv e Drum” on page 37 ). The photosensitiv e dr [...]

  • Seite 152

    T roub leshooting Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 30 Horizontal lines appear in inter v als of 94 mm (3.7 ″ ) . A small dust is bitten in the gear of the photosensitiv e drum. Remov e the dust from the gear ( see “Cleaning the Photosensitiv e Drum” on page 37 ). White and horiz ontal lines appear on t[...]

  • Seite 153

    T roub leshooting Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 31 A white v er tic al line appears o n the page. The laser unit co ver is dirty . Clean th e laser unit cover ( see “Cleaning the Printer” on page 8 ). A small mat ter is mixed with the roller of the toner cartridge. Replace th e toner car tridge. The p[...]

  • Seite 154

    T roub leshooting Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 32 The bac k of the printed page appears dirty . The transfer roller or fuser unit is contaminated after clearing a jam. Displa y the Remote Control P anel and select Fuser Clean ing from the T ool menu to print a cleaning data ( see “Remote Control P anel[...]

  • Seite 155

    T roub leshooting Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 33 ■ If y ou can’t make a print T roub le P ossible Corrective Action Printer not operating. The printer ma y not be plugged into an A C outlet or turned on. Make sure that y ou plugged in the printer and turned it on. The interf ace cable(s) ma y not be[...]

  • Seite 156

    T roub leshooting Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 34 RAM Overflow occurs. Printer’ s memor y is in sufficient in high resolution settin g. Change the resolutio n fo r lower settin g in the printer driver (se e “Setting the Printer Dr iv er” on page 44 , “Setting the Printer Specific Options” on pa[...]

  • Seite 157

    T roub leshooting Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 35 * 1 Microsoft  Windows Server™ 2003 oper ating system (herea fter Windows Server 2003) The W eb Administrative T ool does not wo rk correctly after installing it in Windows Server™ 2003* 1 . As IIS security setting is added to Windows Server 2003 ,[...]

  • Seite 158

    T roub leshooting Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 36 ■ If the print out is rag ged If the print out is curled as illustrated, this can occur be cause of the natural curl of the paper , remov e the media tra y from the printer and tur n the stack of paper ov er , then install the media tra y . ■ A tip wh[...]

  • Seite 159

    T roub leshooting Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 37 If the paste or glue of a label is attached to the photosensitiv e drum of the dr um unit, clean it f ollowing th e steps below . 1 Open the front cov er of the pr inter . 2 Lift the drum unit up ( 1 ) and slide it out of the pr inter ( 2 ). 3 While pushi[...]

  • Seite 160

    T roub leshooting Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 38 4 Remov e the toner car tridge from the dr um unit. 5 If a paste/glue of a label is attached, find the por tion that it is attached while rotating the gear of the photosensitiv e dr um in the direction of the arrow . •The paste will be attached the por [...]

  • Seite 161

    T roub leshooting Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 39 6 Wipe the photosensitiv e drum w ith a dr y cotton sw ab . CA UTION • Do not use a shar p-pointed something like a ball-poin t pen to pre v ent the damage to the drum unit when removing the paste . 7 Inser t the side pins of the toner car t r idge into[...]

  • Seite 162

    T roub leshooting Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 40 8 Fir mly inser t the drum unit in the slot of the printer ( 1 ) [inser t the side pins of the drum unit into the groov e (label )]. Push down ( 2 ). 9 Close the front cov er . 2 2 1 Side pin[...]

  • Seite 163

    T roub leshooting Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 41 1 Open the front cov er of the pr inter . 2 Lift the drum unit up ( 1 ) and slide it out of the pr inter ( 2 ). 3 Open the cov er of the dust scraper . 4 Clean the inside with the v acum cleaner , then close the cov er of the dust scraper . Cleaning the D[...]

  • Seite 164

    T roub leshooting Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 42 5 Fir mly inser t the drum unit in the slot of the printer ( 1 ) [inser t the side pins of the drum unit into the groov e (label )]. Push down ( 2 ). 6 Close the front cov er . 2 2 1 Side pin[...]

  • Seite 165

    Err or Indication Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 43 : Indicator is lit. : Indicator is blinking. : Indicaator is turned off. * 1 The status is v ar ied depending on the cond ition. Err or Indication Indicators Error LED P ossib le Cause Recovery On: 0.5 sec. Off: 0.5 sec. Front cover is open. Clo se the fr[...]

  • Seite 166

    Repack ing Instructions Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 44 It is highly recommended tha t you keep the original carton and ALL packin g materials. Should y ou need to transport or ship your printer , please follo w these instructions. SAFETY CA UTION The printer weighs about 10 k g {22 lbs.}. NO TE • Shou[...]

  • Seite 167

    Repack ing Instructions Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 45 3 Lift the drum unit up ( 1 ) and slide it out of the pr inter ( 2 ). •T o av oid possible toner spillage , it is recommended to place the drum unit on a ne ws- paper , drop cloth or best to place bac k in original (Black) shipping bag. CA UTION ?[...]

  • Seite 168

    Repack ing Instructions Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 46 4 While pushing the drum unit as illustrated below ( 1 ), lift the toner car tridge up ( 2 ). 5 Replace the shipping cov e r on the toner car tridge. 2 1[...]

  • Seite 169

    Repack ing Instructions Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 47 6 Inser t the toner car tr idge into a plas tic bag and cer tainl y seal the end of the bag tightly . 7 Wrap the drum unit with the protective sheet to protect the drum surf ace. 8 Inser t the dr um unit into a plastic b ag and seal the end of the b[...]

  • Seite 170

    Repack ing Instructions Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 48 10 Wipe off any loose toner in and around the printer . NO TE • If a toner vacuum is a v ailable , it is the bes t tool f or cleaning spilled ton er . Do not use a standard office v acuum; the toner will not be retained b y typical v acuum dust co[...]

  • Seite 171

    Specifications Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 49 Printing Method: Semiconductor Laser Print Speed: 18 ppm (pages per min ute) maximum ( A4 size plain pa per , simplex printing, 5% image area) 19 ppm maximum (Letter siz e plain paper , simple x printing, 5% image area) 9 ppm (pages per minute ) maximum (A4 [...]

  • Seite 172

    Specifications Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 50 Interface: P arallel (IEEE1284), USB (Hi-Speed USB 2.0), Ethernet (100Base-TX / 10Base-T) - KX-P7310 only Wa r m U p T i m e 15 seconds [at 22°C (71.6°F), 50% RH] Operating En vironment: 10 to 32.5°C (50 to 90.5°F), 20 to 80% RH Storage En vironment: 0 t[...]

  • Seite 173

    Specifications Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 51 The f ollowin g f onts can be used as the printer’ s resident fonts . Y ou can pr int the list of av ailable f onts from the Remot e Control P anel in Windows . See “Remote Control P anel” on page 28 in “Windo ws” of “Settings and Printing”. NO[...]

  • Seite 174

    Specifications Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 52 ■ Fonts f or P ostScript The f ollowin g 35 f onts can be av ailable. • Dutch 801 SW A, Dutch 801 Bold SW A, Dutch 801 Italic SW A, Dutch 801 Bold Italic SW A • Swiss 721 SW A, Swiss 721 Bold SW A, Swiss 721 Oblique SW A, Swiss 721 Bold Ob lique SW A ?[...]

  • Seite 175

    Specifications Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 53 ■ P aper Specifications This printer is designed to work well with mo st types of paper . Howe ver , diff erences in paper ma y hav e significant effects on the quality of the print or the reliability of paper handling. It is strongly recommended that y ou[...]

  • Seite 176

    Specifications Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 54 NO TE • Please store your paper according to the recommendat ions of the manuf acturer . ■ P aper and En velope Sizes The f ollowin g paper and en velope sizes are supported by the printer . * 1 Duple x printing cannot be perf ormed with A5, A6 size pape[...]

  • Seite 177

    Specifications Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 55 ■ T ypes of P aper to A v oid • Extremely smooth or shiny paper or paper t hat is highly te xtured • Coated papers • Acid paper • Letterhead impr inted with low temperature or thermograph y . These materials may tr ansf er onto the fusing roller an[...]

  • Seite 178

    Specifications Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 56 NO TE • With any label stoc k, the labels must completely cov er the bac king material (see figure below). ■ En velope Specifications It is recommended that y ou purchase only high quality env elopes with diagonal seams, as shown in the diagram belo w: H[...]

  • Seite 179

    Specifications Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 57 It is not recommended that y ou use env elopes with any of the f ollowing characte r istics (using these ma y result in paper jams): • Irregular ly shaped en velo pes • Env elopes with curls, wrinkles, nic ks, twist s, dog-ears or other damage • Env el[...]

  • Seite 180

    Specifications Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 58 Do not attempt to print on any of t he f ollow ing types of en v elopes . These ma y cause damage to your printer . • Env elopes with clasps , snaps or tie strings (see Figure 1) • Env elopes with transparent windo ws (see Figure 2) • Env elopes that w[...]

  • Seite 181

    Specifications Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 59 Connector type: 36PIN Anphenole connector Cable: use a shielded cab le 2 meters (6.6 f eet) or less in length Pin configuration P arallel (IEEE1284) Interface connector (printer side ) P arallel (IEEE1284) Interface Pin Signal 1n S t r o b e 2 Data 1 3 Data [...]

  • Seite 182

    Specifications Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 60 CA UTION • If the cable is connected to PC via printer buff er or selector , the pr inter may not print. • A pr int ser ver cannot be used f or printing. NO TE • Be sure to use only a shielded cabl e. The printer will not operate p roperly if any of th[...]

  • Seite 183

    Specifications Settings and Printing Network Maintenance and Spec. Maintenance and Spec. 61 Cable: It is recommended to use a cab le 2 m (6.6 f eet) or less in length. Pin configuration USB Interface connector (printer side) NO TE • Be sure to use a high- / full-speed shielded cab le (12 Mbps or 480 Mbps) which the Data + and Data – cab les are[...]

  • Seite 184

    Settings and Printing Network Network Maintenance and Spec. 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Setup in Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Selecting the Printing Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

  • Seite 185

    Settings and Printing Network Network Maintenance and Spec. Features 2 This chapter e xplains how to configure the KX-P7310 printer on a suppor ted network environ ment. The KX-P7310 printer provides Ethernet connectivity to function as a network printer . The KX-P7310 network function has the f ollowing f eatures: Suppor ts 100Base-TX and 10Base-T[...]

  • Seite 186

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 3 This chapter e xplains how to set up LPR por t and IPP por t pr inting in Windo ws* 1 (Windows 95, Windo ws 98, Windows Me , Windows NT 4.0, Windo ws 2000, Windows XP and Win dows Ser ver 20 03 environment). When installing the KX-P7310 so ftware , ref er to “Contents [...]

  • Seite 187

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 4 There are two meth ods of network printing. • Printing directly from a computer • Printing through a shared computer (server) Y ou may need to consult with your netwo rk administrator which to select. ■ Printing directl y from a computer The computer's p r int[...]

  • Seite 188

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 5 The f ollowing softwar e is included in the printer’ s CD-ROM disk. Y ou can selectively install each application using the installer on the CD-ROM. ■ Printer Driver and Utilities When installing the printer driver and manual, the f ollowing utilities and manual are [...]

  • Seite 189

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 6 ■ W eb Administrative T ool Manages the printer by sho wing the status of the de vice connected to the network and can change configura tions. This allo wes an administr ator to manage a printer using this tool. Bef ore installing or using, see the help men u f or W eb[...]

  • Seite 190

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 7 The f ollowin g method [A] or [B] is the steps to set up an LPR P or t pr inting using TCP/IP in Windows . [A] Printing directly fr om a computer ( see page 8 ) Step 1: Setting up TCP/IP on the computer Step 2: Setting up TCP/IP on the printer Step 3: Setting up the prin[...]

  • Seite 191

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 8 Step 1: Setting up TC P/ IP on the computer If the TCP/IP protoco l is already installed on your computer and it is configured, proceed to the ne xt step . If it is not installed, y ou need to install TCP/IP in the operating system on the computer and configure it. Be su[...]

  • Seite 192

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 9 [A] Using the DHCP ser ver If the administr ator manages the netw or k with DHCP server , it will automatically assign an IP Address , Subnet Mask and Def ault Gate wa y . These can be view ed by printing out the configuration page . It can be printed b y pressing the PR[...]

  • Seite 193

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 10 If the Network Setup T ool is already installed, clic k [Start] , mov e the pointer to Pr ograms or All Pr ograms , P anasonic and P anasonic KX-P7305 and KX-P7310 , then clic k Network Setup T ool . Proceed to the step 6. 1 Inser t the printer CD-ROM disk into the CD-R[...]

  • Seite 194

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 11 4 F ollow the instructions until th e screen below is displa yed. 5 Click on the Ye s check b utton, and then [Finish] . The list of KX-7310 printers residing on the netw ork is display ed. • If you want to search printers in the network again, click the De vice men u[...]

  • Seite 195

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 12 6 Clic k the KX-P7310 pr inter you w ant to set up in the list. Then click the Setup menu and select Netw ork Setup… . NO TE • When sev eral printers are listed in the Network Setup T ool windo w , select the printer using the Ethernet address (MAC addre ss). Y ou c[...]

  • Seite 196

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 13 8 Remov e the check of the Use DHCP/BOO TP and Use LARP check bo x, then enter IP addres s, Subnet Mask and Def ault Gatewa y . Click [OK] . 9 Confir m the setting and click [OK] . Y ou will see the message “Update is completed. Do y ou wish to reset the printer?”. [...]

  • Seite 197

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 14 NO TE • Y ou cannot search f or the pr inter while the printer is restar ting. • T o confir m that the IP Address is set correctly , (1) On your comp uter , click [Start] , select Pr ograms or All Programs , then clic k MS-DOS Pr ompt . (f or Windows 95 / Windo ws 9[...]

  • Seite 198

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 15 Step 3: Setting up the printer dri ver and the printer port on the computer 1 Inser t the printer CD-ROM disk into the CD-R OM dr iv e. The CD-R OM launches automatically . NO TE • If the CD-ROM does not launch automa tically , perform the f ollowing steps . (1) Doub [...]

  • Seite 199

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 16 5 Click on the Custom Printer Setup chec k button and clic k [Next >] . The Select Setup type windo w is displa yed. 6 Click on the Direct Print PC chec k button and clic k [Next >] .[...]

  • Seite 200

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 17 7 Click on the Select the Netw o rk por t f or KX-P7310 check b utton and clic k the pr inter yo u want to use , then click [Ne xt >] . The Select installed options windo w is displa yed. 8 Select the installed option s in your printer . Click [Ne xt >] . The Sele[...]

  • Seite 201

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 18 NO TE • The installed options are automatically confi gured in the PCL pr inter driver if selecting the printer on the network at the pre vious step . The P ostScript printer dr iver isn’t configured automatically . T o configure this drive r go the proper ties of t[...]

  • Seite 202

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 19 NO TE • If another computers are set up using the shared f older through the netw ork, share the shared f older (Inst7305 b y def ault) created b y selecting [Y es] at step 10 ( see “[A] Using the shared f older on the other computer” on page 20 ).[...]

  • Seite 203

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 20 Step 4: Setting up another comput er If the shared f older has been created at the pre v ious step 3, another computer can be simply set up with the shared f older (see the method [A] or [B]). If the shared f o lder was n ot created, set up the computer with the printer[...]

  • Seite 204

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 21 Step 1: Setting up TCP/ IP on the computer ( se e page 8 ) Step 2: Setting up TCP/IP on the pr inter ( see page 8 ) Step 3: Setting up the printer dri ver and the printer port on the computer The f ollowin g steps must be perf or med on the ser v er computer . 1 Inser t[...]

  • Seite 205

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 22 3 Click Install Printer driver and Utilities . The License Agreement windo w is displa yed. 4 Click [Y es] . 5 Click on the Custom Printer Setup chec k button and clic k [Next >] . The Select Setup type windo w is displa yed.[...]

  • Seite 206

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 23 6 Click on the Printer Server PC chec k b utton and click [Next >] . 7 Select the printer in the Select the curren t por t or Select t he Network por t for KX-P7310 list, then clic k [Next >] . The Select installed options windo w is displa yed.[...]

  • Seite 207

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 24 8 Select the installed option s in your printer . Click [Ne xt >] . The Select the def ault pr inter windo w is display ed. NO TE • The installed options are automatically confi gured in the PCL pr inter driver if selecting the printer on the network at the pre vio[...]

  • Seite 208

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 25 10 Confir m the shared printer name and change it if needed. Click [Ne xt >] .[...]

  • Seite 209

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 26 11 Click [Y es] or [No] . Y es :The easy installer that enab les printing through this ser ver computer is created in the shared f older (Inst7305 b y default). The easy installer allo ws the setting up on a client computer without the CD-R OM. For the detailed inst r u[...]

  • Seite 210

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 27 Step 4: Setting up the c lient computer If the shared f older has been created at the pre v ious step 3, the client computer can be simply set up with the shared f older (see the method [A] or [B]). If the shared f o lder was n ot created, set up the computer with the p[...]

  • Seite 211

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 28 [C] Using the printer CD-ROM 1 Inser t the printer CD-ROM disk into the CD-R OM dr iv e. The CD-R OM launches automatically . NO TE • If the CD-ROM does not launch automa tically , perform the f ollowing steps . (1) Doub le click My computer icon (Windows XP / Windows[...]

  • Seite 212

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 29 5 Click on the Custom Printer Setup chec k button and clic k [Next >] . The Select Setup the PC type windo w is displa yed. 6 Click on the Client PC chec k button and clic k [Next >] .[...]

  • Seite 213

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 30 7 Enter the network path of the shared printer (ser v e r nameprinter name) in the Specify the network path of the PCL printer and Specify the netw ork path of the P o stScript printer bo x, then click [Ne xt >] . The Select installed options windo w is displa yed[...]

  • Seite 214

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 31 8 Select the installed option s in your printer . Click [Ne xt >] . The Select the def ault pr inter windo w is display ed. NO TE • The installed options are automatically confi gured in the PCL pr inter driver if selecting the printer on the network at the pre vio[...]

  • Seite 215

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 32 IPP por t pr inting allows y ou to print a document via the Internet. The fo llowing are the steps to setup IPP por t printing using the TCP/IP protocol. NO TE • If a firewall, e tc. intercepts the communication betw een the printer and your compute r , you will not b[...]

  • Seite 216

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 33 3 Click Install Printer driver and Utilities . The License Agreement windo w is displa yed. 4 Click [Y es] . 5 Click on the Custom Printer Setup chec k button and clic k [Next >] .[...]

  • Seite 217

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 34 6 Click on the Direct Print PC chec k button and clic k [Next >] . 7 Select the printer in the Select the curren t por t or Select t he Network por t for KX-P7310 list, then clic k [Next >] . The Select installed options windo w is displa yed. • If the pr inter [...]

  • Seite 218

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 35 8 Select the installed option s in your printer . Click [Ne xt >] . The Select the def ault pr inter windo w is display ed. NO TE • The installed options are automatically confi gured in the PCL pr inter driver if selecting the printer on the network at the pre vio[...]

  • Seite 219

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 36 Step 4: Setting up IPP port on the computer The f ollowing is the steps f or Windows 95 / Windows 98 / Win dows Me . F or Windows NT 4.0 / Windows 2000 / Windows XP / Windo ws Ser ver 2003, see page 38 . [For Windows 95 / Wind ows 9 8 / Wi n d ows M e] 1 Click [Start] ,[...]

  • Seite 220

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 37 7 Click on the Print using IPP chec k button and clic k [Next >] . 8 Clic k either the Connect using a modem and telephone line or Connect using a local area network chec k b utton. Click [Ne xt >] . • If you select Connect using a modem and telephone line, proc[...]

  • Seite 221

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 38 [For Windows NT 4.0 / Windo ws 2000 / Windows XP / Windows Server 2003] 1 Click [Start] , mov e the pointer to Settings , then click Printer s . The Printers window is displa yed. • For Windo ws XP Profe ssional / Windows Server 2003, clic k [Star t] , then clic k or [...]

  • Seite 222

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 39 7 Click on the Print using IPP chec k button and clic k [Next >] . 8 Clic k either the Connect using a modem and telephone line or Connect using a local area network chec k b utton. Click [Ne xt >] . • If you select Connect using a modem and telephone line, proc[...]

  • Seite 223

    Settings and Printing Network Network Maintenance and Spec. Setup in Windows 40 This enab les you to use the HP JetDirect por t pr inting using the HP JetAdmin soft ware. TCP/IP or IPX/SPX protocol is used f or printing. HP JetDirect P or t Printing using TCP/IP or IPX/SPX in Windows[...]

  • Seite 224

    Settings and Printing Network Network Maintenance and Spec. Setup in Macintosh 41 KX-P7310 Setup Utility uses TCP/IP . Y ou need to set u p AppleT alk and TCP/IP on your computer and printer . The pr inter does not work with AppleT alk Phase1. Step 1: Setting up AppleT alk and TCP/IP on y our computer [For Mac OS 8.5 - Mac OS 9.2] See page 42 f or [...]

  • Seite 225

    Settings and Printing Network Network Maintenance and Spec. Setup in Macintosh 42 [For Mac OS X 10.1 - Mac OS X 10.2] 1 Click System Pref erence ... from the Apple menu and click Network icon. The Network window is displa yed. 2 Select Built-in Ethernet from Show men u. 3 Click the TCP/IP tab . 4 Assign the IP Address to your comp uter or use the D[...]

  • Seite 226

    Settings and Printing Network Network Maintenance and Spec. Setup in Macintosh 43 Step 2: Setting up TCP/IP on the pr inter Y ou need to set the IP Address , Subnet Mask and Def ault Gatewa y fo r the printer . Set them by using one of the f ollowing two methods . Y ou may need to contact y our netwo r k administrator to select the best w ay . • [...]

  • Seite 227

    Settings and Printing Network Network Maintenance and Spec. Setup in Macintosh 44 [B] Using the Netw ork Setup T o ol (Mac OS 8.5 - Mac OS 9.2) Network Setup T ool can operate in the Classic environment only . When using it in Mac OS X 10.1 or Mac OS X10.2, use it in the Classic environmen t. If the administr ator manages the IP Address , contact t[...]

  • Seite 228

    Settings and Printing Network Network Maintenance and Spec. Setup in Macintosh 45 7 Clic k the KX-P7310 pr inter y ou w ant to set up , click Setup menu and then select Netw ork Setup... . NO TE • When sev eral printers are listed, select the printer using the MA C address . Y ou can obtain the numb er (he xadecimal six digits) from the label nea[...]

  • Seite 229

    Settings and Printing Network Network Maintenance and Spec. Setup in Macintosh 46 10 Click [OK] . 11 Click Setup menu and clic k Restar t the printer . 12 Click [OK] to restar t the pr inter . 13 Click the printer a ssigned the IP Address and clic k Network Setup... from the Setup menu. • If a passw ord is set, you m ust enter the pass word and c[...]

  • Seite 230

    Settings and Printing Network Network Maintenance and Spec. Setup in NetW are 47 This chapter e xplains how to setup a client computer to print via a NetW are ser ve r . P erform the f ollowing steps: Step 1: Setting up the printer and ser ver Step 2: Setting up the c lient Step 1: Setting up the printer and server There are f our wa ys of setup . [...]

  • Seite 231

    Settings and Printing Network Network Maintenance and Spec. Setup in NetW are 48 [A] Using NDS - PSER VER mode The f ollowin g are the steps f or setting up the printer . First install the Network Setup T ool from the printer CD-ROM disk and then set up the printer . 1 Star t the ser v er system. 2 Star t the client system and log on the network in[...]

  • Seite 232

    Settings and Printing Network Network Maintenance and Spec. Setup in NetW are 49 7 Click on the Ye s check b utton, and then [Finish] . A list of printers residing on the network is displa y ed. • If you want to se arch the network f or printers again, click the Device menu and select Sear ch . 8 Select the printer you w ant to se t up from the l[...]

  • Seite 233

    [...]

  • Seite 234

    Settings and Printing Network Network Maintenance and Spec. Setup in NetW are 51 16 Expand the T ree and se lect the context where the Queue will be added, and click [Ne xt >] . 17 Click on the Print Server Mode chec k bu tton and click [Ne xt >] .[...]

  • Seite 235

    Settings and Printing Network Network Maintenance and Spec. Setup in NetW are 52 18 Change the queue name if needed. The pr int jobs are temporarily stored on the selected v olume; if there is diff er ent volumes required select it from the list, then click [Ne xt >] . 19 F ollow the instructions on the screen. NO TE • When the setting is fini[...]

  • Seite 236

    Settings and Printing Network Network Maintenance and Spec. Setup in NetW are 53 [B] Using NDS - RPRINTER (NPRINTER) mode The f ollowin g are the steps to set up the printer . First install the Network Setup T ool b y using the printer CD-ROM disk and then set up the printer . 1 Star t the ser v er system. 2 Star t the client system and log on the [...]

  • Seite 237

    Settings and Printing Network Network Maintenance and Spec. Setup in NetW are 54 7 Click on the Ye s check b utton, and then clic k [Finish] . The list of printers residing on the netw ork is displa yed. • If you want to se arch the network f or printers again, click the Device menu and select Sear ch . 8 Select the printer you w ant to se t up f[...]

  • Seite 238

    Settings and Printing Network Network Maintenance and Spec. Setup in NetW are 55 9 Click the Ne tW are tab . NO TE • Y ou can change the Print Ser ver Na me and Printer Name. After changing, clic k [OK] . Then go bac k to the step 8.[...]

  • Seite 239

    Settings and Printing Network Network Maintenance and Spec. Setup in NetW are 56 10 Click on the RPRINTER Mode chec k button. 11 Click [OK] . 12 If y ou change the setting, click [OK] , then clic k [Y es] . The printer is restar ted. The f ollo wing are the steps to set up the ser v er . 13 Select the printer you w ant to configure from the list. C[...]

  • Seite 240

    Settings and Printing Network Network Maintenance and Spec. Setup in NetW are 57 15 Expand the T ree and se lect the context where the Queue will be added, and click [Ne xt >] . 16 Click on the Remote Printer Mode chec k b utton and click [Ne xt >] .[...]

  • Seite 241

    Settings and Printing Network Network Maintenance and Spec. Setup in NetW are 58 17 Select the print ser v er name in the list or enter the pr int ser v er name you want to use f or pr inting. Click [Ne xt >] . NO TE • If the pr int ser ver is on the NetW are ser ver , the pr inter ser ver can be se lected from the list. 18 Change the queue na[...]

  • Seite 242

    Settings and Printing Network Network Maintenance and Spec. Setup in NetW are 59 19 F ollow the instructions on the screen. 20 On the NetW ar e ser ver type LO AD PSER VER xxxxxxxx , then press the Enter ke y . (xxxxxxxx : pr int ser v er name). 21 T ur n the pr inter off and on before printing.[...]

  • Seite 243

    Settings and Printing Network Network Maintenance and Spec. Setup in NetW are 60 P erform the f ollowing steps: Step 1: Setting up the printer Step 2: Setting up the Ser ver Step 3: Setting up the c lient There are two pr inting modes . [A] Print server (PSER VER) mode [B] Remote printer (RPRINTER) mode Bef ore setting up , select a printing mode. [...]

  • Seite 244

    Settings and Printing Network Network Maintenance and Spec. Setup in NetW are 61 Step 2: Setting up the Server [A] U sing Print Server (PSER VER) mode 1 Select the printer you w ant to configure in the Network Setup T ool window . 2 Click the Setup men u and select Create NetW are Queue . 3 F ollow the instructions on the screen. • When asked to [...]

  • Seite 245

    Settings and Printing Network Network Maintenance and Spec. Setup in NetW are 62 5 Click on the Print Server Mode chec k bu tton and click [Ne xt >] . 6 Change the queue name if needed, then click [Ne xt >] . 7 F ollow the instructions on the screen. NO TE • When the setting is finished, the printer is automatically restar ted.[...]

  • Seite 246

    Settings and Printing Network Network Maintenance and Spec. Setup in NetW are 63 [B] U sing the Remote Printer (RPRINTER) mode 1 Select the printer you w ant to configure in the Network Setup T ool window . 2 Click the Setup men u and select Create NetW are Queue . 3 F ollow the instructions on the screen. • When asked to select NDS or Binder y m[...]

  • Seite 247

    Settings and Printing Network Network Maintenance and Spec. Setup in NetW are 64 5 Click on the Remote Printer Mode chec k b utton and click [Ne xt >] . 6 Select the print ser v er name in the list or enter the pr int ser v er name you want to use f or pr inting. Click [Ne xt >] . NO TE • If the pr int ser ver is on the NetW are ser ver , t[...]

  • Seite 248

    Settings and Printing Network Network Maintenance and Spec. Setup in NetW are 65 7 Change the queue nam e if needed. Click [Ne xt >] . 8 F ollow the instructions on the screen. 9 Ty p e LO AD PSER VER xxxxxxxx , then press the Enter ke y . (xxxxxxxx : print ser v er name). 10 T ur n the pr inter off and on before printing. Step 3: Setting up the[...]

  • Seite 249

    Settings and Printing Network Network Maintenance and Spec. Setup in UNIX 66 This chapter e xplains how to set up printing in various UNIX en vironments . Suppor ted UNIX variants are as f ollows: • Solaris 2.6 • Solaris 2.3x - 2.5x • HP-UX 9.x and 10.x • AIX 4.x.x • BSD UNIX There are two w a ys of printing. • Printing using LPD • Pr[...]

  • Seite 250

    Settings and Printing Network Network Maintenance and Spec. Setup in UNIX 67 Step 2: Adding the printer to UNIX systems P erform the f ollowin g steps to add the printer as a network printer to a UNIX systems. When editing the hosts file , contact y our network administr ator . 1 Log in as root. # login root 2 Edit your /etc/hosts file to add the p[...]

  • Seite 251

    Settings and Printing Network Network Maintenance and Spec. Setup in UNIX 68 2 Print • Pr int using "lp" command. F or details, ref er to the Solaris manual. # lp -d kxp7310lp <file name>[...]

  • Seite 252

    Settings and Printing Network Network Maintenance and Spec. Setup in UNIX 69 [For Solaris 2.3x - 2.5x] 1 Create Print Queue. (1) Log in as root. # login root (2) Stop print scheduler . # /usr/sbin/lpshut (3) Add print ser ver . Example: Add host name "kxp7310 " # /usr/sbin/lpsystem -R O -t bsd kxp7310 (4) Set up print queue. Example: Add [...]

  • Seite 253

    Settings and Printing Network Network Maintenance and Spec. Setup in UNIX 70 [For HP-UX 9.x and 10.x] 1 Set up remote spooler . (1) Log in as root. # login root (2) Disab le printer spooler . # /usr/lib/lpshut (3) Add the f ollow ing line to the /etc/inetd.conf . printer stream tcp now ait root /usr/lib/rlpdaemon -i (4) Restar t inetd. /etc/inetd -[...]

  • Seite 254

    Settings and Printing Network Network Maintenance and Spec. Setup in UNIX 71 [For AIX 4.x.x] 1 Create print queue. (1) Log in as root. # login root (2) Add print ser ver . Example: Add hostname "kxp7310". # ruser -a -p kxp7310 (3) Star t remote pr inter daemon. # star tsrc -s lpd # mkitab 'lpd:2:once:startsrc -s lpd' 2 Add print[...]

  • Seite 255

    Settings and Printing Network Network Maintenance and Spec. Setup in UNIX 72 [For BSD UNIX] The f ollowin g is an e xample f or Sun OS4.1.3. The command and paths ma y diff er depending on the OS v ersion. Please ref er to the workstation manual. 1 Create printer queue. (1) Log in as root. # login root (2) Add an entry for the printer in /etc/print[...]

  • Seite 256

    Settings and Printing Network Network Maintenance and Spec. Setup in UNIX 73 FTP (File T r ansf er Protocol) is a protocol f or transf err ing files instal led on TCP/IP systems. P erform the f ollo wing steps. 1 Log on the printer . # ftp P ANA (or ftp 172.16.xxx.xxx) Connected to P ANA. 220 KX-P7310 Netw ork V er xxxx FTP ser ver . User(P ANA:roo[...]

  • Seite 257

    Settings and Printing Network Network Maintenance and Spec. Using the Printer’ s W eb Server 74 If an IP Address has been a ssigned to a printer , you can access the printer's W eb Ser v er (Embedded W eb Server). It allo ws monitor ing or setting the printer . T o displa y the printer’ s Web Se r ver , there are one or tw o methods. • F[...]

  • Seite 258

    Settings and Printing Network Network Maintenance and Spec. Using the Printer’ s W eb Server 75 1 Open the browser (Internet Explorer or Netscape). 2 Enter the printer’ s IP Address in the Addr ess bo x and press the Enter key . The printer’ s Web Server screen is displa yed. (Example) http://172.16.xxx.xxx/ (screen in Windows) Displa ying th[...]

  • Seite 259

    Settings and Printing Network Network Maintenance and Spec. Using the Printer’ s W eb Server 76 T o change the printer's setting, 1 Displa y the W eb Ser ver screen (see page 74 , 75 ). 2 Click Netw ork Setup in the left pane. The Enter Network P assw ord window is displa yed. 3 Ty p e root in the User name bo x and click [OK] . •If the pa[...]

  • Seite 260

    Settings and Printing Network Network Maintenance and Spec. Using the Printer’ s W eb Server 77 It is recommended that the pass word is set so only the netw or k administr ator can change the configuration. T o set the pass word, proceed to the f ollowing steps . 1 P erf orm step 1 - 3 of “Changing the Printer's Settings” on page 76 . 2 [...]

  • Seite 261

    Settings and Printing Network Network Maintenance and Spec. Using the W eb Administrative T ool 78 W eb Administrativ e T ool enables the ability to manage the de vice connected to the netwo r k. F or the installation, see Readme as f ollows. (1) Inser t the pr inter CD-R OM disk in your CD-R OM dr ive . (2) Doub le click the Readme .txt. [D (CD-R [...]

  • Seite 262

    Settings and Printing Network Network Maintenance and Spec. Using the W eb Administrative T ool 79 ■ On the server computer 1 Open the browser (Internet Explorer or Netscape). 2 Enter the URL ( http://localhost/pademu/ ) in the Addres s bo x and press the Enter key . The W eb Administrativ e T ool screen is displa yed. Or 1 Click [Start] , select[...]

  • Seite 263

    Settings and Printing Network Network Maintenance and Spec. Using the W eb Administrative T ool 80 ■ On the c lient computer 1 Open the browser (Internet Explorer or Netscape). 2 Enter the URL [ http://(the address of the ser ver)/pademu/ ] in the Address bo x and press the Enter key . The W eb Administrativ e T ool screen is displa yed.[...]

  • Seite 264

    Settings and Printing Network Network Maintenance and Spec. Appendix 81 Entering the pass word is required to change the printer's setting, when a pass word is set in the printer . 1 Displa y the Netw ork Setup T ool Window • T o display the Netw ork Setup T ool window , ref er to “Step 1: Setting up TCP/IP on t he computer” on page 8 f [...]

  • Seite 265

    Settings and Printing Network Network Maintenance and Spec. Appendix 82 8 Click [OK] to send the setting to the printer . 9 Windows: Click [Y es] to restar t the printer . Or Mac: Click [OK] , then click Setup menu, click Restar t the printer and clic k [OK] . NO TE • The pr inter’ s password of the printer’ s Web Ser ver is same as that of t[...]

  • Seite 266

    Settings and Printing Network Network Maintenance and Spec. Appendix 83 It enab les to reset the printer's network settings to the f actor y default settings . 1 Displa y the Netw ork Setup T ool . • T o display the Network Setup T ool windo w , refer to “[ B] Using the Network Setup T ool” on page 9 f or Windows or “[B] Using the Netw[...]

  • Seite 267

    Settings and Printing Network Network Maintenance and Spec. Appendix 84 This section e xplains how to resolv e the common problems y ou ma y hav e with the KX-P7310. If KX-P7310 does not oper ate properly or you are una ble to set u p with Network Setup T ool, we recommend that y ou print the diagnostic/configuration pag es first. • How to Dia gn[...]

  • Seite 268

    Settings and Printing Network Network Maintenance and Spec. Appendix 85 ■ T rouble in Windo ws En vironment (TCP/IP) Unable to sear ch KX-P7310 printer using Network Setup T ool. • Check that the printer is connected to the network correctly . • In Option of the menu bar in Network Setup T ool, mak e sure Use TCP/IP Pr otocol is selected. •[...]

  • Seite 269

    Settings and Printing Network Network Maintenance and Spec. Appendix 86 ■ T roub le in NetW are En vir onment Unable to sear ch KX-P7310 using Netw ork Setup T ool. • Check that the printer is connected to the network correctly . • In the Option menu bar in Netw ork Setup T ool, make sure Use NetW are Pr otocol is selected. • Initialize the[...]

  • Seite 270

    Settings and Printing Network Network Maintenance and Spec. Appendix 87 ■ T rouble in Macintosh En vir onment Unable to detect KX-P7310. • Check that the KX-P7310 is connected to the netw ork correctly . • If the KX-P7310 is on the assigned zone , make sure the zone name is selected from "Chooser" . • Make sure the correct printer[...]

  • Seite 271

    Settings and Printing Network Network Maintenance and Spec. Appendix 88 ■ T roubleshooting when inst alling the printer software T rouble P ossible Cause Corrective Action Printer software cannot be installed in a computer . Y ou do not log on the computer as an Administ rator in Windows NT 4.0, Windows 20 00, Windows XP or Windows Ser ver 2 003.[...]

  • Seite 272

    Settings and Printing Network Network Maintenance and Spec. Appendix 89 • General (see belo w) • TCP/IP ( see page 90 ) • NetW are ( see page 91 ) • AppleT alk ( see page 92 ) • SMB ( see page 92 ) • SNMP ( see page 93 ) • Printer P ort ( see page 94 ) ■ General Configuration P arameters Name Facto ry Default Description Change root[...]

  • Seite 273

    Settings and Printing Network Network Maintenance and Spec. Appendix 90 ■ TCP/IP Name Facto ry Default Description Use TCP/IP Protocol ENABLE Enables o r disables TCP/IP protocol. Use DHCP/BOO TP ENABLE Enables or disab les DHCP/BOO TP . When enab led, KX-P7310 gets an IP Address from the DHCP/BOO TP ser v er while booting. T o use this function [...]

  • Seite 274

    Settings and Printing Network Network Maintenance and Spec. Appendix 91 ■ NetW are Name Facto ry Default Description Use NetW are Protocol ENABLE Enables o r disables NetW are printing. F rame T ype 802.2 Sets def ault F rame type used b y KX-P7310. If KX-P7310 does not w ork with the frame type, it will be automatically changed to diff erent typ[...]

  • Seite 275

    Settings and Printing Network Network Maintenance and Spec. Appendix 92 ■ AppleT alk ■ SMB Name Facto ry Default Description Use AppleT alk Protocol ENABLE Enables o r disables AppleT alk protocol for KX-P7310. Printer Name KX-P7310-xxxxxx Sets the AppleT alk printer name . The name set here can be seen from Chooser . Zone Name * Sets zone name[...]

  • Seite 276

    Settings and Printing Network Network Maintenance and Spec. Appendix 93 ■ SNMP Name Facto ry Default Description A uthentic Community ****** Sets SNMP authentic community name . This community name is au thenticated when receiving SNMP Set Request. Use A uthentic T rap DISABLE Enab les or disab les authentic TRAP . TRAP Community public Enters TR[...]

  • Seite 277

    Settings and Printing Network Network Maintenance and Spec. Appendix 94 ■ Printer P or t Name Facto ry Default Description lp P or t BOJ String (MJL String) NULL Sets the MJL String that will be sent bef ore sending a print job to the direct output por t (lp). EOJ String (MJL String) NULL Sets the MJL String that will be sent at the end of a prin[...]