Omega OS641C-MV-LS Bedienungsanleitung

OS641C -MV -LS Infrared T emperature T ransducer With Laser Marker OMEGA[...]

OMEGAnet SM On-Line Service http://www.omega.com Internet e-mail info@omega.com For immediate technical or application assistance: USA and Canada: Mexico and Latin America: Sales Service: 1-800-826-6342 / 1-800-TC-OMEGA SM Tel: (95) 800-TC-OMEGA SM Customer Service: 1-800-622-2378 / 1-800-622-BEST SM FAX: (95) 203-359-7807 Engineering Service: 1-80[...]

INTRODUCTION This instrument is a portable easy use compact-sized digital infrared tempera- ture transducer with laser marker designed for simple one hand operation. SAFETY INFORMATION It is recommended that you read the safety and operation instructions before using the infrared thermometer. The symbol on the instrument indicates that the operator[...]

2 CAUTION • Do not use the unit near any device which generates strong electromagnetic radiation or near a static electrical charge, as these may cause errors. • Do not use the unit where it may be exposed to corrosive or explosive gases. The unit may be damaged, or explosion may occur. • Do not keep or use this unit in an environment where i[...]

SPECIFICATIONS GENERAL Low battery indication: the "Red LED " is displayed when the battery voltage drops below the operating level. Operating Environment: 0°C to 50°C at < 70% relative humidity. Storage Temperature: -20°C to 60°C, 0 to 80% R.H. with battery removed from meter. Battery: 4 pcs 1.5V (AAA size). Battery Life: 100 hour[...]

4 ELECTRICAL Temperature Range: -20°C to 260°C. Analog Output: 1mV/°C. Accuracy: ±3% of reading or ±3°C, whichever is greater @ 18 to 28°C ambient operating temperature. Temperature Coefficent: ±0.2% of reading or ±0.2°C, whichever is greater, change in accuracy per °C change in ambient operating temperature above 28°C or below 18°C. R[...]

5 Spot size increases with distance from the probe tip as shown CAUTION: Use of controls or Adjustments or performance of Procedures other than those Specified herein may result in Hazardous radiation exposure. Aperture Label (on front): Danger, Certification & ID Label: (Located on back of unit)[...]

6 OPERATING INSTRUCTIONS Push buttons Laser Marker Button Release MEAS button then press " " button to toggle between turn on and turn off the Laser Marker annunciator, If " " annunciator turn on, press MEAS button the laser marker beam is being emitted, releasing MEAS button turn off the laser marker beam. MEAS (MEASURE) Button[...]

7 OPERATION 1. Plug the infrared temperature transducer test leads into the Vdc input jack and common or ground input jack on the DMM. Observe polarity. 2. Set the DMM to the 2V range only, ignore the decimal point. 3. Use " " button to select turn on or turn off the Laser Marker. 4. Point the lens at the object whose temperature is to be[...]

8 MEASUREMENT CONSIDERATIONS 1. Theory of Measurement Every object emits infrared energy in accordance with its temperature. By mesuring the amount of this radiant energy, it is possible to determine the temperature of the emitting object. 2. About Infrared Infrared radiation is a form of light (electromagnectic radiation), and has the property tha[...]

9 4. Emissivity All objects emit invisible infrared energy. The amount of energy emitted is proportional to the object's temperature and its ability to emit IR energy. This ability, called emissivity, is based upon the material that the object is made of and its surface finish. Emissivity values range from 0.10 for a very reflective object to [...]

10 MAINTENANCE Battery Replacement Power is supplied by four 1.5V (AAA size) batteries. The "LOW BATT" red LED lighted when replacement is needed.To replace the batteries, remove the screw from the back of the meter and lift off the battery cover case. Remove the batteries from battery contacts. Cleaning Periodically wipe the case with a [...]

Substance Thermal Substance Thermal emissivity emissivity Asphalt 0.90 to 0.98 Cloth (black) 0.98 Concrete 0.94 Human skin 0.98 Cement 0.96 Lather 0.75 to 0.80 Sand 0.90 Charcoal (powder) 0.96 Earth 0.92 to 0.96 Lacquer 0.80 to 0.95 W ater 0.92 to 0.96 Lacquer (matt) 0.97 I c e 0.96 to 0.98 Rubber (black) 0.94 Snow 0.83 Plastic 0.85 to 0.95 Glass 0[...]

W ARRANTY OMEGA warrants this unit to be free of def ects in materials and workmanship and to give satisf actor y service for a period of 13 months from date of purchase. OMEGA W arranty adds an additional one (1) month grace period to the nor mal one (1) year product warranty to cov er handling and shipping time . This ensures that OMEGA's cu[...]

It is the policy of OMEGA to comply with all worldwide safety and EMC/EMI regulations that apply . OMEGA is constantly pursuing cer tification of its products to the European Ne w Approach Directives. OMEGA will add the CE mark to e ver y appropr iate de vice upon certification. The inf or mation contained in this document is belie ved to be correc[...]

M-2865/0799 Where Do I Find Everything I Need for Process Measurement and Control? OMEGA...Of Course! HEATERS þ Heating Cable þ Cartridge & Strip Heaters þ Immersion & Band Heaters þ Flexible Heaters þ Laboratory Heaters PRESSURE/STRAIN AND FORCE þ Transducers & Strain Gauges þ Load Cells & Pressure Gauges þ Displacement Tra[...]