Niles Speaker Bedienungsanleitung

INST ALLA TION GUIDE HD FX FOR USE IN MUL TI-CHANNEL MUSIC OR HOME THEA TER SYSTEMS HIGH DEFINITION, SIDE/REAR CHANNEL EFFECTS, IN-W ALL LOUDSPEAKERS DS00421ACN_HDFX.indd 1 5/6/05 5:04:45 PM[...]

Th an k y ou fo r cho os in g H DF X H ig h-D efi nit io n, Si de- /R ea r -C ha nne l Eff ec ts, In -W a ll Lo uds pe ake rs fr om Ni le s. Wit h pro pe r i ns ta llat io n and o per ati on , y ou sh ou ld en joy ye ar s o f tr oub le -fr ee us e. Ni le s m an ufa ct ure s th e i nd ust ry’ s mos t com pl et e l in e o f cus to m i ns ta llat i[...]

NILES AUDIO CORPORA TION – 1-800-BUY -HIFI NILES AUDIO CORPORA TION – 1-800-BUY -HIFI INTRODUCTION Niles HDFX High-Definition, Side-/Rear -Channel Effects, In-Wall Loudspeakers are expressly designed for superior sonic quality in side- or rear -channel applica tions. They employ advanced technology components that extract the subtle nuances in[...]

2 BIPOLE/DIPOLE AND FX/CUT SWITCHES The HDFX also includes a baffle-mounted BIPOLE/DIPOLE mode switch so the installer can set the sur - round effects for either side or rear placement. A companion FX/CUT switch allo ws adjustment of the direct/diffuse sound field balance to provide realistic effects, regardless of room size. EASY RETROFIT INST A[...]

NILES AUDIO CORPORA TION – 1-800-BUY -HIFI 3 Bracket New Construction Wings Frame Loudspeaker Baffle Acoustic Fine T uning Controls Grille Figure 1 . Mounting an HDFX vertically into a wall. INST ALLA TION CONSIDERA TIONS DS00421ACN_HDFX.indd 5 5/6/05 5:04:55 PM[...]

TOOLS AND PRECAUTIONS We recommend using the following tools to install an HDFX loudspeaker: • Electric drill with 1/4- and 1/2-inch drill bits, and a 1-inch flat drill bit (for drilling through studs) • Keyhole or drywall saw • Stiff wire , fish tape , or glow rods (for routing cables) • Phillips screwdriver set • Cable ties • Pencil ?[...]

NILES AUDIO CORPORA TION – 1-800-BUY -HIFI LOUDSPEAKER WIRE Use 2-conductor loudspeaker wire when connecting loudspeakers to your receiver or amplifier . For most applications, we recommend using 16- or 18-gauge wire. For wiring runs longer than 80 feet, we recommend 14-gauge wire. The spring-loaded terminals of the HDFX will accommodate up to 1[...]

LOUDSPEAKER PLACEMENT NOTE: THE NILES HDFX LOUDSPEAKER IS DESIGNED FOR USE IN SIDE- OR REAR-CHANNEL APPLICA TIONS ONL Y . FOR FRONT -OR CENTER-CHANNEL APPLICA TIONS, WE RECOMMEND USING A NILES HDLCR OR HDLCR BX LOUDSPEAKER PLACEMENT FOR HOME THEA TER REAR APPLICA TIONS In home theater , the goal is to reproduce the experience of a grea t movie thea[...]

NILES AUDIO CORPORA TION – 1-800-BUY -HIFI • If your home theater system is cap able of rep roducing Dolb y EX surr ound sound, consider using a seco nd pair of HD FX loudspeak ers (on the side wall s) for an add itional rear s urround effec t, as shown in Figure 4 ( on the next page). Ideal ly , the side loud - speake rs should be placed in-li[...]

THE BOUNDAR Y EFFECT Placing a loudspeaker in a corner can powerfully affect the way a listener perceives bass response. Known as the boundar y effect, placing loudspeakers close to a wall/ceiling boundary or near a corner -wall boundary will emphasize certain bass frequencies, while canceling others. This effect can make the loudspeaker sound exce[...]

NILES AUDIO CORPORA TION – 1-800-BUY -HIFI INST ALLA TION FUNDAMENT ALS RUNNING THE LOUDSPEAKER WIRE IN NEW CONSTRUCTION IMPORT ANT : IF Y OU HAVE DOUBTS ABOUT WHETHER Y OU ARE C AP ABLE OF INST ALLING A NILES WALL-MOUNT LOUDSPEAKER, PLEASE CONSUL T A NILES DEALER OR PROFESSIONAL INST ALLER. THEY HAVE SPECIAL TOOLS, TECHNIQUES, AND EXPERIENCE TO [...]

RUNNING THE LOUDSPEAKER WIRE IN NEW CONSTRUCTION (CO NTIN UED) ABOUT DRILLING Use a bit that is large enough for the wires you plan to run. This is an important considera tion, since you may be drilling a lot of holes. Here are some additional tips: • We recommend using an auger bit for rough-in wiring . It will actually pull itself through the w[...]

NILES AUDIO CORPORA TION – 1-800-BUY -HIFI 11 CONCEALING LOUDSPEAKER WIRE ABOUT INTERIOR W ALLS Interior walls in almost all North American residences are hollow , so they are easy installa tion sites for flush mounting loudspeakers and routing new loudspeaker cable in the house. Looking at a painted wallboard, plaster , or paneling, you only se[...]

CONCEALING LOUDSPEAKER WIRE (CO NTI NUED ) PLANNING THE LOUDSPEAKER WIRE ROUTE (C ONT INUE D) T o find exactly where an electrical cable is routed, tr y inspecting the inside of the wall by turn- ing off the breaker for a particular power outlet or switch, removing the cover plate and switch or receptacle, and then shining a penlight into the wall[...]

NILES AUDIO CORPORA TION – 1-800-BUY -HIFI OTHER POSSIBLE LOUDSPEAKER WIRE ROUTES INCLUDE: • Under -the-carpet runs using flat loudspeaker wires. • Heating and air conditioning vents used as wire racew ays for plenum-rated wire . NOTE: CHECK YOUR LOCAL BUILDING CODES, SINCE SOME MUNICIP ALITIES REQUIRE CONDUIT . CUTTING HOLES In traditional w[...]

NEW CONSTRUCTION: INST ALLING A BRACKET The hole-saving bracket enables a faster and cleaner final installation of the loudspeaker . It forces the drywall installer to cut out the loudspeaker hole for you and provides wire ties for the loud - speaker wire, reducing the risks of accidental loss or movement of the wire. In addition, it enables you t[...]

NILES AUDIO CORPORA TION – 1-800-BUY -HIFI Figure 12. The loudspeaker wire is looped and hung on two nails attached to the joists, securing it for future use. Be sure to note the location on house plans. C O N C E A L I N G L O UD S P E A K E R W I RE F O R A F U T U RE I N S T A L L A T I O N 1. Attach the loudspeaker wire in a loop between the [...]

EXISTING CONSTRUCTION: INST ALLING A BRACKET (CONTINUED) 4. Continue turning the coat hanger as you move it into the cavity to a depth of approxi- mately 4 inches. If you feel an obstruction, fill the hole(s) with spackling compound and repeat steps 1 through 4 at a new location. 5. If the coat hanger moves freely in a complete circle , hold the su[...]

NILES AUDIO CORPORA TION – 1-800-BUY -HIFI FINISHING THE INST ALLA TION P AINTING THE GRILLE AND FRAME After drywall is up, each HDFX frame and grille may be painted without the need for primer . For best results, use a spray gun or airless sprayer , thin the paint to prevent clogging of the grille holes, and apply several light coats instead of [...]

CONNECTING AND INST ALLING THE LOUDSPEAKER 1. At each loudspeaker , separ ate the loudspeaker wire so that at least 2 inches of each conductor are free . Strip away 1/4 inch of insulation from each loudspeaker wir e. 2. On each set of loudspeaker connectors, press down the spring-loaded lever , insert the appropriate conductor , and then release th[...]

NILES AUDIO CORPORA TION – 1-800-BUY -HIFI IMPORT ANT : WHEN INST ALLING THE LOUDSPEAKERS IN THE CEILING, OR IF THE INST ALLA TION IS IN AN EARTHQUAKE ZONE, WE RECOMMEND USING THE ENCLOSED SHEET MET AL SCREWS TO SECURE THE BAFFLE TO THE FRAME AS FOLLOWS: a. Locate the dimples on the front baffle . b . Place th e self-tapping sheet-metal screw in [...]

CHECKING LOUDSPEAKER PHASE (C ONT INUE D) Of course, there are some wires that a ppear completely identical. So be careful, or you might make a connection mistake. If you do, one loudspeaker will be playing “out-of-phase” with the other loudspeaker . A pair of out-of-phase loudspeakers works a gainst each other , and the sound of the two playin[...]

NILES AUDIO CORPORA TION – 1-800-BUY -HIFI SETTING THE DIRECT/DIFFUSE SOUND FIELD BALANCE Each HDFX also includes a companion FX/CUT control (see Figure 18 ) that allows adjustment of the direct/diffuse sound field balance to provide realistic effects regardless of room size. • In large rooms (where the loudspeakers ar e farther away from the [...]

OPERA TION LISTENING A T HIGHER VOLUMES Achie ving a r easonabl e volum e of sou nd in a large ro om requi res more amplifi er power t han it d oes in a small ro om. It i s possib le to tu rn the volume u p so hig h that the amplifie r runs o ut of powe r . This creates “cl ipping” disto rtion, which will mak e treble sound very harsh a nd un[...]

NILES AUDIO CORPORA TION – 1-800-BUY -HIFI SPECIFICA TIONS Recommended Amplifier P ower Nominal Impedance 10 to 150 watts per channel 8 ohms Frequency Response Sensitivity 65 Hz to 21 kHz, +/- 3 dB 88 dB with 2.83 V pink noise input, measured at 1 meter on axis Frame Dimensions Hole Cut-Out Dimensions 8-1/4" x 14-1/2" 7-1/8" x 13-[...]

LIMITED W ARRANTY NILES AUDIO CORPORA TION (“NILES”) W ARRANTS ITS LOUDSPEAKER PRODUCTS TO THE ORIGINAL PURCHASER TO BE FREE OF MANUFACTURING DEFECTS IN MA TERIAL AND WORKMANSHIP FOR A PERIOD OF FIVE YEARS FROM D A TE OF PURCHASE. THIS WARRANTY IS SUBJECT TO THE FOLLOWING ADDITIONAL CONDITIONS AND LIMIT A TIONS. THE WARRANTY IS VOID AND INAPPLI[...]

W ARRANTY REGISTRA TION CARD Model Purchased_________________________________________________________ Serial Number___________________________________________________________ Date Purchased (month/day/year)_____________________________________________ Dealer Name and Location__________________________________________________ _______________________[...]

Niles Audio Corporation 12331 S.W . 130 Street Miami, Florida 33186 Designed and Engineered in USA Made in China ©2005 Niles Audio Corporation. All rights reserved. Niles, the Niles logos and Blending High Fidelity and Architecture are registered trademarks of Niles Audio Corporation. Microperf is a trademark of Niles Audio Corporation. All other [...]