Mitsumi electronic LDT322V Bedienungsanleitung

32" LCD Display Monitor USER’S MANUAL 1. User's Manual 1-1 Downloaded From TV-Manual.com Manuals[...]

English Important Information ......................................................................................................... .......................... English-2 Safety Precautions, Maintenance & Recommended Use ........................................................................... English-4 Contents ............................[...]

DECLARA TION OF CONFORMITY This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interfer ence received, including interfer ence that may cause undesired operation. U.S. Responsible Party: Mitsubishi Digital Electr[...]

English Important Information TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET . TO FULL Y DISENGAGE THE POWER TO THE UNIT , PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET . DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P ARTS INSIDE. REFER SER VICING TO QUALIFIED SERVICE PERSONNEL. This symbol warn[...]

• The power cable connector is the primary means of detaching the system from the power supply . The monitor should be installed close to a power outlet, which is easily accessible. • Handle with care when transporting. Save packaging for transporting. • Please clean the holes of back cabinet to reject dirt and dust at least once a year becau[...]

English Contents * Remember to save your original box and packing material to transport or ship the monitor . Y our new LDT322V monitor box* should contain the following: • LCD monitor • Power Cord (3 m) • Video Signal Cable (4 m) • User’ s Manual • Wireless Remote Contr ol and AAA Batteries • Clamper x 2 • Screw for Clamper x 2 •[...]

ON EXIT MUTE INPUT Button Location OFF EXIT button Activates the OSD menu when the OSD menu is turned-off. Acts as EXIT button to move to previous menu with OSD menu. Remote control sensor and Power indicator Receives the signal from the r emote control (when using the wireless r emote control). See also page 9. Glows green when the LCD monitor is [...]

English AUDIO IN 1, 2, 3 T o input audio signal from external equipment such as a com- puter , VCR or DVD player . AUDIO OUT T o output the audio signal from the AUDIO IN 1,2 and 3 jack. VIDEO IN/OUT VIDEO IN connector (BNC and RCA): T o input a composite video signal. BNC and RCA are not available at the same time. (Use only one input). VIDEO OUT [...]

Wireless Remote Contr ol POWER button Switches the power on/off. * If Power Indicator is not glowing, then no controls will work. INPUT button Selects from input signal, [RGB1], [RGB2], [RGB3], [DVD/ HD], [VIDEO<S>] and [VIDEO]. AUDIO INPUT button Selects from input audio signal, [AUDIO1], [AUDIO2], [AUDIO3]. SIZE button Selects picture size,[...]

English Handling the remote contr ol * Do not subject to strong shock. * Do not allow water or other liquid to splash the remote control. If the r emote control gets wet, wipe it dry immedi- ately . * Avoid exposur e to heat and steam. * Other than to install the batteries, do not open the remote. Operating Range for the Remote Control Point the to[...]

1. Determine the installation location CAUTION: DO NOT A TTEMPT TO INST ALL THE LCD MONITOR BY YOURSELF . Installing your LCD display must be done by a quali fi ed technician. Contact your dealer for more information. CAUTION: MOVING OR INST ALLING THE LCD MONITOR MUST BE DONE BY TWO OR MORE PEOPLE. Failure to follow this caution may r esult in in[...]

English 7. Adjust the sound Make adjustments when adjustment of the volume is requir ed. 8. Adjust the screen (See pages 23-31) Make adjustments when adjustment of the screen display position or distortion is requir ed. 9. Adjust the image (See page 23-31) Make adjustments when adjustment such as the brightness or contrast is requir ed. 10. Recomme[...]

13. When LDT322V is installed in portrait position Conditions LDT322V can be installed in portrait position, under the following conditions: Caution: Portrait position is effective only when wall-mounted or ceiling-mounted. The stands(legs) can not be fi tted to the monitor in portrait position. Placing the monitor in portrait position will shorte[...]

English 1. Lay the screen face down Lay the protective sheet on a table, which was wrapped around the monitor when it was packaged, beneath the screen surface so as not to scratch the scr een face. This device cannot be used or installed without the T abletop Stand or other mounting accessory . Failure to follow correct mounting procedur es could r[...]

Connections Before making connections: * First turn off the power of all the attached equipment and make connections. * Refer to the user manual included with each separate piece of equipment. Wiring Diagram LCD monitor DVD player HD or laser disk player Equipment with digital interface Personal computer Personal computer LCD monitor (second monito[...]

English Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer's screen image. Some video cards may not display an image corr ectly . Connect the LCD Monitor to a Personal Computer • T o connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor , use the supplied PC - [...]

Connecting with Digital Interface Equipment Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface) standard. Connect the LCD Monitor to a Computer with a Digital Output • The RGB 1 IN connector also accepts a DVI-D cable. • Input TMDS signals conforming to DVI standards[...]

English Connecting a DVD Player with component out Connecting your DVD player to your LCD monitor will enable you to display DVD video. Refer to your DVD player owner’ s manual for more information. Connect the LCD Monitor to a DVD Player • T o connect the DVD/HD In connector (BNC) on the LCD monitor , use a separately available BNC connector c[...]

Connecting to a Ster eo Ampli fi er Y ou can connect your stereo ampli fi er to your LCD monitor . Refer to your ampli fi er owner's manual for more information. Connect the LCD Monitor to a Stereo Ampli fi er • T ur n on the LCD monitor and the ampli fi er only after all connections have been made. • Use an RCA cable to connect the A[...]

English 1. Pressing the Main Power Switch. NOTE: When the Main Power Switch is used to power off the LCD monitor , the remote control and the power button will not activate the on mode and both green and r ed power indicator turn off. Be sure to turn the Main Power Switch to the on mode before using these two options. 2. Pressing the power button. [...]

Power Indicator Status Power ON Green Power OFF Red Red On Green Blinking Po w er Standby Red, Green Red Blinking * Power Standby when “SCHEDULE” is enable Diagnosis (Detecting failure) See troubleshooting on page 35 Using Power Management The LCD monitor follows the VESA approved DPM Power Management function. The power management function is [...]

English Information OSD RGB1, 2, 3 Video Input mode Input signal Information Audio input mode Picture Size mode RGB2 1024 x 768 48kHz 60Hz AUDIO : 1 SIZE : FULL ) DVD/HD Video Input mode Audio input mode Picture Size mode DVD/HD AUDIO : 3 SIZE : FULL VIDEO<S>, VIDEO Video Input mode Input Signal Colour System mode Audio input mode Picture Siz[...]

OSD (On-Scr een-Display) Contr ols SET Press MENU button to open Main menu. Press UP or DOWN button to select sub-menu. Press EXIT button to open Main menu. Press UP or DOWN button to select. UP or DOWN button INPUT button Press UP or DOWN, and PLUS or MINUS button to select function, or control which you like. Press INPUT button to decide. Press I[...]

English BRIGHTNESS Adjusts the overall image and background scr een brightness. Press + button to incr ease brightness. Press - button to decr ease brightness. CONTRAST Adjusts the image brightness in relation to the input signal. Press + button to incr ease contrast. Press - button to decr ease contrast. NOTE: sRGB picture mode is standar d and ca[...]

H POSITION Controls Horizontal Image position within the display ar ea of the LCD. Press + button to move scr een to right. Press - button to move scr een to left. V POSITION Controls Vertical Image position within the display area of the LCD. Press + button to move screen to UP. Press - button to move scr een to DOWN. CLOCK * : INPUT RGB2,3 only P[...]

English BALANCE Adjust the balance of L/R volume. Press + button to move the ster eo sound image to right. Sound of the left side will be small. Press - button to move the ster eo sound image to left. TREBLE T o accentuate or reduce the high frequency sound. Press + button to incr ease TREBLE sound. Press - button to decr ease TREBLE sound. BASS T [...]

AUTO SETUP * : INPUT RGB2,3 only Press "SET" button to automatically adjust scr een size, horizontal position, vertical position, clock, clock phase, white level and black level. Press "EXIT" button to cancel execution AUTO SETUP and then will r eturn to the previous menu. AUTO ADJUST * : INPUT RGB2,3 only Selecting the auto adj[...]

English OSD TURN OFF The OSD control menu will stay on as long as it is use. In the OSD T ur n Off submenu, you can select how long the monitor waits after the last touch of a button to shut off the OSD contr ol menu. The preset choices ar e 5 -120 seconds. INFORMA TION OSD Selects the information OSD display or not. The information OSD will displa[...]

INPUT RESOLUTION * : INPUT RGB2,3 only Selects to decision of input signal about below timings, 1024x768, 1280x768 and 1360x768. AUTO: Determines the resolution automatically . 1024x768: Determines the resolution as 1024x768 1280x768: Determines the resolution as 1280x768 1360x768: Determines the resolution as 1360x768 BLACK LEVEL EXP ANSION * : IN[...]

English TILING TILING demonstrates multiple screens. This feature provides a single large screen using up to 16 monitors. It will be able to divide up to 4 each H and V. This requires you to feed the PC output into each of the monitors through a distributor. H MONITORS: Select number of horizontal divide. V MONITORS: Select number of vertical divid[...]

NOTE 1: IMAGE PERSISTENCE Please be aware that LCD T echnology may experience a phenomena known as Image Persistence. Image Persistence occurs when residual or “ghost” image of a pr evious image remains visible on the scr een. Unlike CRT monitors, LCD monitors’ image persistence is not permanent, but constant images being displayed for a long[...]

English : Supported : Not supported SUB RGB1 RGB1 RGB2 RGB3 DVD/HD VIDEO<S> VIDEO RGB2 RGB3 DVD/HD VIDEO VIDEO<S> MAIN A B PIP A B POP A OFF PIP SIZE SMALL MIDDLE LARGE : 320 dots X 240 dots : 480 dots X 320 dots : 640 dots X 480 dots : 320 dots X 240 dots POP SIZE “PIP”, “POP” mode resolution (Refer ence) Press the “PIP ON/OF[...]

Contr olling the LCD monitor via RS-232C Remote Contr ol This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal. Functions that can be controlled by a personal computer ar e: • Power ON or OFF • Switching between input signals Connection LCD Monitor + PC NOTE: If your PC (IBM or IBM compatible) is equipped [...]

English 3) Control sequence (1) The command from a computer to the LCD monitor will be sent in 600 ms. (2) The LCD monitor will send a return command 600 ms* after it has received and encoded. If the command isn’ t received correctly , the LCD monitor will not send the return command. (3) The personal computer checks the command and con fi rms i[...]

Reduced Footprint: Provides the ideal solution for envir onments requiring superior image quality but with size and weight limitations. The monitor’ s small footprint and low weight allow it to be moved or transported easily from one location to another . Color Control Systems: Allows you to adjust the colors on your screen and customize the colo[...]

English T r oubleshooting No picture • The signal cable should be completely connected to the display card/computer . • The display card should be completely seated in its slot. • Front Power Switch and computer power switch should be in the ON position. • Check to make sure that a supported mode has been selected on the display card or sys[...]

No Sound • Check to see if speaker cable is properly connected. • Check to see if mute is activated. • Check to see if volume is set at minimum. Remote Control is not available • Check the Remote Control’ s batteries status. • Check if batteries are inserted correctly . • Check if the Remote Control is pointing at the monitor’ s rem[...]

English Speci fi cations Speci fi cations (LDT322V) Product Specifications LCD Module Frequency Pixel Clock Viewable Size Input Signal PC-Input: VIDEO Input: AUDIO Input: RS-232C: Output Signal PC-Output: VIDEO Output: AUDIO Output: Speaker Output: Resolutions Supported Power Supply Power Consumption Operational Environment Storage Environment Di[...]

Pin Assignment 1) Analog RGB input (Mini D-SUB 15P): R G B 2 Mini D-SUB 15P 1 Video Signal Red Video Signal Gr een Video Signal Blue GND DDC-GND Red-GND Green-GND Blue-GND +5V (DDC) SYNC-GND GND DDC-SDA H-SYNC V -SYNC DDC-SCL 6 7 8 9 10 11 12 13 14 15 2 3 4 5 Pin No Name 5 10 15 1 6 11 2) S-VIDEO input (MINI DIN 4P): V I D E O <S> MINI DIN 4P[...]