Minolta DiMAGE DiMAGE Scan Multi PRO Bedienungsanleitung

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129

Zur Seite of

Richtige Gebrauchsanleitung

Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung Minolta DiMAGE DiMAGE Scan Multi PRO an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von Minolta DiMAGE DiMAGE Scan Multi PRO, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.

Was ist eine Gebrauchsanleitung?

Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung Minolta DiMAGE DiMAGE Scan Multi PRO die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.

Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung Minolta DiMAGE DiMAGE Scan Multi PRO. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.

Was sollte also eine ideale Gebrauchsanleitung beinhalten?

Die Gebrauchsanleitung Minolta DiMAGE DiMAGE Scan Multi PRO sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts Minolta DiMAGE DiMAGE Scan Multi PRO
- Den Namen des Produzenten und das Produktionsjahr des Geräts Minolta DiMAGE DiMAGE Scan Multi PRO
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts Minolta DiMAGE DiMAGE Scan Multi PRO
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen

Warum lesen wir keine Gebrauchsanleitungen?

Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von Minolta DiMAGE DiMAGE Scan Multi PRO zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von Minolta DiMAGE DiMAGE Scan Multi PRO und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service Minolta finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von Minolta DiMAGE DiMAGE Scan Multi PRO zu überspringen, wie es bei der Papierform passiert.

Warum sollte man Gebrauchsanleitungen lesen?

In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts Minolta DiMAGE DiMAGE Scan Multi PRO, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.

Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von Minolta DiMAGE DiMAGE Scan Multi PRO widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.

Inhaltsverzeichnis der Gebrauchsanleitungen

  • Seite 1

    INSTRUCTION MANU AL E 9224-2887-11 H-A108[...]

  • Seite 2

    2 Thank you f or purchasing the Minolta DiMA GE Scan Multi PRO . The DiMA GE Scan Multi PRO AF- 5000 is a Multiple f or mat film scanner capable of scanning 35mm, 120/220 (6x4.5, 6x6, 6x7, 6x8, 6x9). This manual has been designed to help you understand the oper ation of your scanner . Please read this manual thoroughly to realize all the benefits o[...]

  • Seite 3

    DiMA GE Scan Multi PRO 3 FOR PR OPER AND SAFE USE • Use only within the v oltage range specified on the unit. Inappropriate current may cause damage or injur y through fire or electric shock. • Do not disassemble this product. Electric shock ma y cause injur y if a high v oltage circuit inside the product is touched. T ake the product to a Mino[...]

  • Seite 4

    4 Minolta DiMA GE Scan Multi PRO 35mm film holder (FH-P1), Slide mount holder (SH-P1) and Univ ersal holder (UH- P1) 120/220 (6x4.5, 6x6, 6x7, 6x8, 6x9) film attachments with glass and glassless Film Masks Ultra SCSI D-sub half-pitch 50-pin connector cable IEEE1394 connector cable A C power cord CD-ROM f or DiMA GE Scan Multi PRO softw are and PDF [...]

  • Seite 5

    DiMA GE Scan Multi PRO 5 Overview Scanner Setup Index Scan Previe w Scan Appendix Image Correction The details of the contents are described on the follo wing page . This section describes the required system and the names of the par ts. This section describes how to set up the scanner . Final Scan 10 13 This section describes how to perf or m the [...]

  • Seite 6

    6 T ABLE OF CONTENTS FOR PROPER AND SAFE USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Software Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 P ACKA GE CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

  • Seite 7

    DiMA GE Scan Multi PRO 7 T ABLE OF CONTENTS INDEX SCAN INDEX SCAN WINDOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 The Index T ab P ar t — Names of P ar ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 MAKING AN INDEX SCAN . . . . . . . . . . . . . . . . . . . . . . .[...]

  • Seite 8

    8 T ABLE OF CONTENTS IMA GE CORRECTION IMA GE CORRECTION WINDO W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 The Image Correction T ab P ar t — Names of Parts . . . . . . . . . . . . . . . . . . . . . . . . .64 T ONE CUR VES AND HIST OGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

  • Seite 9

    DiMA GE Scan Multi PRO 9 FINAL SCAN SCAN SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92 The Scan Settings P ar t Window — Names of P ar ts . . . . . . . . . . . . . . . . . . . . . . . . .92 CREA TING / DELETING JOB FILES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

  • Seite 10

    10 SYSTEM REQUIREMENTS — PC / A T CPU: Operating System: Memory: Monitor: Applications: P entium 166MHz or later processor (or better). Windows ® Me , Windows ® 2000 Prof essional A minimum of 96 MB application RAM in addition to the requirements f or the OS and Adobe Photoshop™. 256 MB or more when scanning with 16 bit output or using the Di[...]

  • Seite 11

    DiMA GE Scan Multi PRO 11 SYSTEM REQUIREMENTS — MA CINT OSH Excludes notebook PCs. P ow er Macintosh G4 processor is recommended when scanning with 16 bit output or using the Digital ICE/ROC/GEM function. Mac OS 8.6 to 9.1 A minimum of 64 MB application RAM in addition to the requirements f or the Mac OS and Adobe Photoshop™. 256 MB or more whe[...]

  • Seite 12

    12 SCANNER — NAMES OF P AR TS Film-slot door Indicator lamp Film Holder Eject button P ower s witch SCSI ID s witch IEEE 1394 interf ace connector Dip s witches A C power soc ket SCSI Interf ace connector[...]

  • Seite 13

    DiMA GE Scan Multi PRO 13 SCANNER SETUP SCANNER SETUP FLO W CONNECTING THE HARD W ARE REMO VING THE OPTICS LOCKING SCREW LA UNCHING THE SOFTW ARE INST ALLING THE SOFTW ARE SETTING THE FILM FORMA T/FILM TYPE SETTING THE PREFERENCES INSERTING THE FILM HOLDER LO ADING THE FILM HOLDER GETTING ST ARTED USING THE SCSI INTERF A CE USING THE IEEE1394 INTER[...]

  • Seite 14

    14 REMO VING THE OPTICS LOCKING SCREW Bef ore using the scanner for the first time , remove the optics locking scre w on the bottom panel of the scanner with a flat- head screwdriv er . As the removed loc king screw is necessary when transpor ting the scanner , inser t it into the storage posistion, f or future use. TRANSPORTING THE SCANNER When tr[...]

  • Seite 15

    DiMA GE Scan Multi PRO 15 CONNECTING THE HARD W ARE Switch No. Function ON OFF 1 SCSI terminator ON OFF 2 A uto Po wer Save ON OFF 3— — — 4 Select Interface SCSI IEEE 1394 SETTING THE DIP SWITCHES Bef ore connecting the scanner to a computer tur n off the power of the scanner , then, decide which interf ace you will be using, and use the Dip [...]

  • Seite 16

    16 USING THE SCSI INTERF A CE Setting the SCSI ID 1. T urn off the computer and all connected SCSI devices. 2. T urn the SCSI terminator switch (Dip switc h 4) to ON. 3. Confirm which SCSI IDs are not being used. 4. Set the SCSI ID using the upper or lower SCSI ID select buttons. • T wo operating SCSI de vices in the same SCSI chain cannot share [...]

  • Seite 17

    DiMA GE Scan Multi PRO 17 USING THE SCSI INTERF A CE 4. T urn the SCSI terminator switc h (Dip switch 1) to OFF . • An e xter nal terminator is not necessar y with this scanner . 5. Plug the SCSI cable fr om the next de vice into the open port on the back of the scanner . IF THERE ARE O THER DEVICES IN Y OUR SCSI CHAIN… 1. Place the scanner on [...]

  • Seite 18

    18 4. T urn the terminator switch (Dip switc h 1) to ON. • An e xter nal terminator is not necessar y with this scanner . 5. Plug the power cor d into the scanner’ s AC socket, then plug it into a grounded outlet. IF THE DIMA GE SCAN MUL TI PRO IS THE LAST OR ONL Y DEVICE IN Y OUR SCSI CHAIN… USING THE SCSI INTERF A CE 6. Plug the power cor d[...]

  • Seite 19

    DiMA GE Scan Multi PRO 19 USING THE IEEE 1394 INTERF A CE The driver software only supports IEEE1394 connection with Windo ws®2000, Windows®Me and Macintosh OS. This scanner has been packaged with the IEEE 1394 cab le. F or details, ref er to the page 106. With Macintosh made by Apple Computer , Inc., an IEEE1394 Interface is named “FireWire”[...]

  • Seite 20

    20 WINDO WS ® 98 / WINDO WS ® 2000 / WINDO WS ® ME / WINDO WS NT ® • In the procedure below , the hard disk drive f or system star tup is drive C , and the CD-ROM drive is driv e D . • Make sure the scanner isn’t connected to the computer when you install the softw are. INST ALLING THE SOFTW ARE — WINDO WS 1. T urn on the computer to st[...]

  • Seite 21

    DiMA GE Scan Multi PRO 21 If the InstallShield Wizard pr ogram does not start up automatically Operate the f ollowing procedure. 1. “Star t” “Run…”. 2. Click [Bro wse (B)] in the Run dialog bo x. 3. Select CD-ROM drive (DS MultiPRO (D:)) from the “Look in:” list bo x in the Browse dialog bo x. 4. Select “Driv er” f older and clic [...]

  • Seite 22

    22 INST ALLING THE SOFTW ARE — WINDO WS 6. T o install the software in the default folder (C:Pr ogram FilesDS_MultiPRO), press Next . T o install the software in another f older , click [Browse ...] to display the window f or selecting a f older . Specify the director y to install the softw are in, then click [OK]. Click [Ne xt>] to displa y[...]

  • Seite 23

    DiMA GE Scan Multi PRO 23 INST ALLING THE SOFTW ARE — MA CINT OSH Please remov e or disable an y antivir us system e xtensions before launching this installer . These e xtensions may conflict with the operation of this installer . Replace or re-enable them when installation is complete . Hold the shift ke y down during star tup to disable the e x[...]

  • Seite 24

    24 INST ALLING THE SOFTW ARE — MACINT OSH Select the installation method to use. Name of the volume (disk) and f older in which the software will be installed. Install type pulldown menu 8. Clic k on Accept . • If you do not ag ree to the conditions stated in the End-User License Agreement, clic k on [Decline] and the software will not be insta[...]

  • Seite 25

    DiMA GE Scan Multi PRO 25 11. Click on Install . The f ollowing message appears when the installer is finished. 12. Click on Quit . • The software will be installed in a new f older titled DiMA GE Scan Multi PRO . • If Easy Install was chosen, the DiMA GE Scan Multi PRO f older will contain the f ollowing items: DS_MultiPRO Utility , DS_MultiPR[...]

  • Seite 26

    26 LA UNCHING THE UTILITY SOFTW ARE Use the utility software , as a stand alone application, when you just want to scan the photogr aphic image and store. 1. Select Start Programs Minolta DiMA GE Scan Multi PRO ver .1.0 DS MultiPR O Utility . LA UNCHING THE SOFTW ARE — WINDO WS The TW AIN driver allo ws you to control the software through another[...]

  • Seite 27

    DiMA GE Scan Multi PRO 27 LA UNCHING THE SOFTW ARE — MA CINT OSH The plug-in software lets y ou access the software through Adobe Photoshop . LA UNCHING THE PLUG-IN This manual uses Adobe Photoshop V er .6.0 as the host application. Commands ma y vary among applications. 1. Launch Adobe Photoshop. 2. Select File Import DS_MultiPRO Plug-in… The [...]

  • Seite 28

    28 MAIN WINDO W — NAMES OF P ARTS MAIN WINDO W THE MAIN WINDO W P ART — NAMES OF P ARTS T ab part • Index (see page 41) • Prescan (see page 49) • Image Correction (see page 63) Scan Setting part (see page 92) Main Window part (see below) Holder T ype list box Film f or mat list bo x Inde x Scan button Prescan button Scan button Film T ype[...]

  • Seite 29

    DiMA GE Scan Multi PRO 29 1. Clic k on in the Main window . “A uto Expose for Slides” c heckbo x This option allows y ou to select whether to perform auto exposure during the prescan or the final scan when using colour slides. As colour slide users often adjust the e xposure and colour when taking a photograph, the A uto Expose function when pe[...]

  • Seite 30

    30 3. Clic k on OK to accept the new preference settings. • Changes to the Pref erence settings take eff ect immediately . SETTING THE PREFERENCES “Colour depth” setting list bo x This option allows y ou to specify the format when outputting the scanned data to a file or an application software . Select one from the follo wing items of the li[...]

  • Seite 31

    DiMA GE Scan Multi PRO 31 35MM FILM HOLDER FH-P1 Use the FH-P1 f or 35mm negatives and unmounted 35mm slide film. • The 35mm Film Holder FH-P1 can hold film str ips up to 6 frames long. • Blow dust off the film before placing it into the film holder . 1. P osition the film holder so the white arro w is on the top-left side, then open the slide [...]

  • Seite 32

    32 LO ADING THE FILM HOLDER SLIDE MOUNT HOLDER SH-P1 • The slide mount holder SH-P1 can hold up to 4 mounted slides (35mm). • Slide mounts must be thicker than 1mm and thinner than 2mm to fit properly into the holder . • Blow dust off the slide before placing it into the film holder . 1. P osition the slide mount holder SH-P1 so the white arr[...]

  • Seite 33

    DiMA GE Scan Multi PRO 33 120/220 (6x4.5, 6x6, 6x7, 6x8, 6x9) film attachment with glass (HA-P1) 1. Install the selected attachment on the holder . Place the attachment with the button side up at the position on the holder that is suited f or the attachment you selected and fix it aligning with the two groov es on the left side until it clicks . If[...]

  • Seite 34

    34 Removing a Film While pressing the button on the lo wer side of the attachment, lift the film cov er . Removing an Attac hment While sliding the le ver on the middle par t of the holder to the right, lift the attachment. 4. Place a film on the mask with the emulsion side do wn while aligning the lower side of the film with the film guide (at the[...]

  • Seite 35

    DiMA GE Scan Multi PRO 35 120/220 (6x4.5, 6x6, 6x7, 6x8, 6x9) glassless film attachment (HA-P2) 1. Install the selected attachment on the holder . Place the attachment with the button side up at the position on the holder that is suited f or the attachment you selected and fix it aligning with the two groov es on the left side until it clicks . If [...]

  • Seite 36

    Multi-format attac hment (sold separately , HA-P3) Purchasing the Multi-f or mat attachment, sold separately , will enable you to deal with a wider range of films such as a 16mm film. Multi-f or mat attachment (HS-P1) The f ollowing contents should be included in this package . If there is an ar ticle of inferior quality or par ts missing, please c[...]

  • Seite 37

    DiMA GE Scan Multi PRO 37 LO ADING THE FILM HOLDER Removing a Film While sliding the button on the co ver of the attachment, lift the film cov er . Removing an Attac hment 1. While sliding the button on the co ver of the attachment, open the cov er , and while sliding the le ver on the upper par t of the holder to the right, lift the cover and remo[...]

  • Seite 38

    38 INSER TING THE FILM HOLDER During the star t-up time, the indicator lamp will blink. DO NO T inser t the film holder into the film slot until the indicator lamp is steady . 1. Press the power s witch to turn the scanner on. T urn on y our computer , then launc h the DiMA GE Scan Multi PRO software. • The green indicator lamp will b link slowly[...]

  • Seite 39

    DiMA GE Scan Multi PRO 39 SETTING THE FILM FORMA T/FILM TYPE SELECTING THE FILM FORMA T 1. Select the film f ormat from the dr op-down list. • The Inde x window (see page 42) will appear if 35mm, 6x4.5, 6x6, 6x7, 6x8, 6x9, Multi F or mat 35mm or Multi F or mat 6x9 is selected. • The f ollowing list shows the film f or mats and appropriate holde[...]

  • Seite 40

    40 Film format File type 35mm, 6x4.5, 6x6, 6x7, 6x8, 6x9 Colour Negative , Slide Film, B&W Negative , B&W P ositive Multi F or mat 35mm, Multi F or mat 6x9 TEM Film, T ransparent Media, Colour Negative , Slide Film, B&W Negative , B&W P ositive SETTING THE FILM FORMA T/FILM TYPE SELECTING THE FILM TYPE 1. In the Main window , select[...]

  • Seite 41

    DiMA GE Scan Multi PRO 41 INDEX SCAN SCANNING FLO W PreVIEW scan (see page 49) Image Correction (see page 63) Index Scan Changing the window size Selecting frames Rotating or Flipping the index frames Rever sing frame order full scale view Saving the index scan image Saving the index image file Loading the index image file FINAL Scan and Save (see [...]

  • Seite 42

    42 INDEX SCAN WINDO W When 35mm is selected in the film f or mat, inde x scan displays a scan of each image on the film holder in the Inde x tab. The time required for an inde x scan depends on the performance of your computer . If you don ’ t w ant to index scan the entire strip , click on the appropriate image box in the inde x tab to select an[...]

  • Seite 43

    DiMA GE Scan Multi PRO 43 CHANGING THE WINDO W SIZE Change the size of the Inde x tab window as desired. The position of the frames will change accordingly . 1. Clic k on the corner tab (lower-right corner) and drag to reach the desired size . MAKING AN INDEX SCAN 1. Clic k on in the Main window . • All frames on the film f older will be scanned [...]

  • Seite 44

    44 SCANNING THE IMA GE SELECTING THE FRAMES 1. Clic k on an image to select it for scanning. • Selected images are surrounded by a dark gre y frame. 2. Clic k on to scan the selected image (s). • The image will be opened in your photo application software when the scanner ’ s dr iv er software is closed. • Some photo applications can only a[...]

  • Seite 45

    DiMA GE Scan Multi PRO 45 1. Select the desired frames, then c lick on , or , . • Each time the selected frames will rotate in 90 ° increments either clockwise or counter-cloc kwise, and flip vertically or hor iz ontally . • Rotating and Flipping the inde x frames will not affect the Prescan or Scan. RO T A TING OR FLIPPING THE INDEX FRAMES Ro[...]

  • Seite 46

    46 SA VING THE INDEX SCAN IMA GE When perf or ming the inde x scan, all the thumbnail images displa yed in the inde x window can be sav ed as an image file. 1. Clic k on in the Main window . • The standard file sav e dialog bo x for each operating system will appear . 2. Enter the desired file name, select the file destination and then clic k on [...]

  • Seite 47

    DiMA GE Scan Multi PRO 47 SA VING THE INDEX IMA GE FILE The inde x images display ed in the index tab can also be sa ved as an inde x file. 1. Clic k on in the Main window . • File types other than the Inde x Image file (*.idx) cannot be selected in the “ Sav e as T ype ” list bo x (or the file f or mat pull-down menu). 2. Enter the desired f[...]

  • Seite 48

    48 LO ADING THE INDEX IMA GE FILE The inde x file can be display ed in the index tab after loading the sav ed inde x file. The previously displa yed pre vie w images are erased. 1. Clic k on in the Main window . • The standard file open dialog bo x for each operating system will appear . 2. Select the index file to be load and then c lick on [Ope[...]

  • Seite 49

    DiMA GE Scan Multi PRO 49 PREVIEW SCAN SCANNING FLO W PREVIEW SCAN Rotating the Image Flipping the Image Full screen viewing, Magnifying or Reducing the view Scrolling the Image AE-Exposure lock AE area lock A uto cropping Cropping the Image Cropping the prescan image Focus – P oint AF (auto focus) Focus – Manual Displaying frame number RGB/CMY[...]

  • Seite 50

    50 PRESCAN WINDO W THE PRESCAN T AB P ART — NAMES OF P ARTS Prescanning creates a scan of the image to which you can apply and vie w colour , contrast, orientation, and br ightness corrections bef ore clicking on the Scan b utton. This ensures that final scan will be the best it can be. Click on the Prescan tab in the Main windo w . Rotate Left b[...]

  • Seite 51

    DiMA GE Scan Multi PRO 51 1. Clic k on in the Main window . The prescanned image will appear in the Prescan tab. MAKING A PRESCAN NO TE: Press Ctrl when prescanning ( on the Macintosh) to see CMY values in the RGB/CMY displa y .[...]

  • Seite 52

    52 R O T A TING THE IMA GE Click on the and buttons to correct the orientation of your image bef ore scanning. Changes will be reflected in the prescan image. Click on to rotate the ima g e 90 ° c lockwise. Click on to rotate the ima g e 90 ° counter - cloc kwise.[...]

  • Seite 53

    DiMA GE Scan Multi PRO 53 FLIPPING THE IMA GE The and buttons let you flip the image left to right or top to bottom bef ore scanning. Changes will be reflected in the prescan image. Click on to flip the image top to bottom. Click on to flip the image left-to-right. • The image is upside down compared to the original prescan. • Image is re verse[...]

  • Seite 54

    54 FULL SCREEN VIEW This function allows y ou to display the entire prescanned image in the Prescan tab . 1. Clic k on . • The prescan image is magnified so that it fits in the Main window . • When [Full-Screen] button is clic ked again, the prescan image returns to the previous size . MA GNIFYING OR REDUCING THE VIEW Use the zoom b utton to in[...]

  • Seite 55

    DiMA GE Scan Multi PRO 55 Use the grab b utton to scroll an enlarged image. • The grab b utton can only be selected when the image has been magnified bey ond the limits of the Prescan tab . SCR OLLING THE IMA GE 1. Click on in the Prescan image display area. • The pointer will change to . 2. Click on and drag the image to the desired location.[...]

  • Seite 56

    56 AE Lock allo ws you to lock an auto e xposure v alue. Once the auto e xposure is locked, the m ultiple images on the same film will be scanned with the same e xposure settings when performing the prescan and the final scan. With the AE lock function, f or example , when scanning a backlit scene or a film to which e xposure adjustments hav e been[...]

  • Seite 57

    DiMA GE Scan Multi PRO 57 AE AREA LOCK A uto exposure can be based on a specified area in the prescanned image . P erf or m the procedure below after prescanning the image . 1. Click on . 2. Press the Shift key . • The AE area is indicated b y an unbroken line , whereas the cropping area is indicated by a dashed line . 3. While pressing down the [...]

  • Seite 58

    58 CROPPING The cropping frame defines how m uch of the prescan image will be scanned. The dimensions of the cropping frame are displa yed in the low er left cor ner of the Prescan tab . T o enlarge or reduce the size of the cropping frame … Click on the cr opping frame and drag the pointer in or out. • Click on the corners and drag to resize t[...]

  • Seite 59

    DiMA GE Scan Multi PRO 59 CROPPING THE IMA GE CROPPING THE PRESCAN IMA GE A more precise prescan image can be displa yed by prescanning the cropped area again. 1. Click on . • After the cropped area is prescanned again, a more precise prescan image is displa yed. T o define a new cr opping frame … Click and dra g outside the current cropping fr[...]

  • Seite 60

    60 FOCUS The DiMA GE Scan Multi PRO uses the CCD sensor f or autofocus . A utofocus uses the centre of the image to determine focus . Nor mally , this results in an e xcellent scan because the film plane is flat. Howe ver , if the film is war ped or curled, or if A utofocus is turned off in the preferences , focus ma y not be accurate. In this case[...]

  • Seite 61

    DiMA GE Scan Multi PRO 61 FOCUS MANU AL FOCUS Manual f ocus can be use with specific area of the image. 1. Click on . • The pointer will change to the Manual F ocus icon. • Click on [Man ual Focus] b utton again to escape the function. 2. Click on the area of the image y ou wish to be in sharp focus. • The f ocus control window dialog bo x wi[...]

  • Seite 62

    62 DISPLA YING FRAME NUMBER When 35mm is selected the film f or mat, this function allows you to displa y the current frame number and total fr ame number . 1. T o display the next frame, c lick on . 2. T o display the previous frame, c lick on . RGB/CMY INFORMA TION The RGB inf or mation from the pointer position is alwa ys display ed in the Presc[...]

  • Seite 63

    DiMA GE Scan Multi PRO 63 IMA GE CORRECTION IMA GE CORRECTION FLO W IMA GE CORRECTION T one curves and histogram Brightness/ contrast / colour balance Hue / saturation/ lightness V ariation correction Selective colour correction Unsharp mask Snapshot Cancelling the image correction Full-screen view Job save / job load Digital ICE/ROC/GEM INDEX SCAN[...]

  • Seite 64

    64 IMA GE CORRECTION WINDO W THE IMA GE CORRECTION T AB P ART — NAMES OF P ARTS This scanner gives y ou three options f or correcting the br ightness, contr ast, and colour balance of the final scan. Click on the Ima ge Correction tab in the Main window . Selectiv e Colour button V ariations button Hue/Saturation/Lightness Correction button Brigh[...]

  • Seite 65

    DiMA GE Scan Multi PRO 65 T ONE CUR VES AND HIST OGRAM When the T one cur v es/Histogram Correction button is clic ked, the T one Curves and Histogr am dialog bo x is display ed. The T one Cur v es par t allows you to change the tone curves and directly correct the output val u e. The Histogram part allows you to specify the input and output area f[...]

  • Seite 66

    66 T ONE CUR VES AND HIST OGRAM CORRECTING THE T ONE CUR VES Changing the shape of a correction cur v e changes the output le vel f or each corresponding input lev el. Changing the shape of the red, green, or b lue cur ves aff ects colour balance of the image. Changes to the RGB curve aff ect the image contrast and brightness. 1. Click on the arro [...]

  • Seite 67

    DiMA GE Scan Multi PRO 67 T ONE CUR VES AND HIST OGRAM SETTING THE WHITE, BLA CK OR GREY POINTS White point (highlight point) indicates the section you w ant to lighten, Black point (shado w point) the section you want to darken, and Grey the section y ou want to ha ve as neutral tone . An image with no highlight or shadow will not be clear and app[...]

  • Seite 68

    68 T ONE CUR VES AND HIST OGRAM Setting the Grey point This function can specify the point to be changed to gre y in the image. 1. Click on . • The cursor changes to the gre y dropper shape. 2. Click the point to be changed to grey in the image. • The image is corrected so that the point you clic ked is gre y point. • The change will be refle[...]

  • Seite 69

    DiMA GE Scan Multi PRO 69 T ONE CUR VES AND HIST OGRAM CORRECTING THE HIST OGRAM The input slide bar has the Input shadow slider , Input gamma slider and Input Highlight slider . The output slide bar has the Output Highlight slider and Output shadow slider . The image can be corrected by dr agging the slider or inputting the value in the te xt bo x[...]

  • Seite 70

    70 BRIGHTNESS / CONTRAST / COLOUR B ALANCE Brightness, Contrast adjusts the brightness and contrast of the whole image. By adjusting the ratio of each RGB colour , you can correct the greenness or redness of the whole image, as well as o verlapping of cer tain colors (colour ov erlap). Click on in the Ima g e Correction tab. THE BRIGHTNESS, CONTRAS[...]

  • Seite 71

    DiMA GE Scan Multi PRO 71 1. Drag each Brightness, Contrast or Colour balance (R, G, B) slider , or input the desired v alue in the text bo x. • The change will be reflected in the prescan image. • Moving the Brightness, Contrast or Colour balance (R, G, B) slider changes “ P ost-Correction Greyscale ” and “ Correction Result LUT ” . Br[...]

  • Seite 72

    72 HUE / SA TURA TION / LIGHTNESS Y ou can adjust the 3 colour elements Hue (tone of colour), Saturation (vividness), and Lightness (brightness) separately . This is suitable for when the colour seems dull and y ou wish to add vividness. It is necessary to choose a good combination of Hue, Saturation, and Lightness . Click on in the Image Correctio[...]

  • Seite 73

    DiMA GE Scan Multi PRO 73 A UTO SETTING When [A uto Setting] button is click ed, the saturation of the image is corrected automatically without changing the hue and lightness. HUE / SA TURA TION / LIGHTNESS RESET If you clic k [Reset] button, the settings in the current correction window are reset. Hue correction: Dragging the Hue slider , changes [...]

  • Seite 74

    74 SELECTING THE ITEM T O BE CORRECTED Colour Balance , brightness, contrast and saturation can all be selected f or correction in the V ariations screen.Howe ver , colour balance and saturation are not a vailab le when using the monochrome film. 1. Click on the arro w next to the correction list bo x. The av ailable correction items are display ed[...]

  • Seite 75

    DiMA GE Scan Multi PRO 75 V ARIA TION CORRECTION COLOUR B ALANCE CORRECTION Six images that hav e been corrected by one-step in each RGBCMY direction the centre current image are displa yed. 1. Select colour balance . • The corrected 6 frames of v ar iation images are displa yed. 2. Click the image in the direction y ou want to correct from the 6[...]

  • Seite 76

    76 SA TURA TION CORRECTION T wo images with saturation correction are display ed on the right and left sides of the centre image. The v ariation image on the left side shows reduced saturation, and on the right side shows increased saturation. 1. Click the image in the direction y ou want to correct, except f or the image in the centre. • The ima[...]

  • Seite 77

    DiMA GE Scan Multi PRO 77 This f eature separates the colour region into 7 groups, Red, Green, Blue , Cyan, Magenta, Y ellow and Black. Y ou can adjust the colour range of each processed colour Cyan, Magenta, Y ellow , and Blac k against the separate colour groups. Y ou can use this if you wish to correct a cer tain colour only and not the whole pi[...]

  • Seite 78

    78 1. Drag the Amount, Radius, Threshold le vel or Dark P ar t Pr otection level slider or input the desired value in the te xt box. • The value s from 0 to 500 f or the Amount, from 0.1 to 5 f or the Radius and from 0 to 255 for the Threshold lev el or Dark Part Protection lev el can be input respectively . • The change will not be reflected i[...]

  • Seite 79

    DiMA GE Scan Multi PRO 79 Amount: If you adjust the slider to increase (to the right), Pix els increasing the lev el of contrast will become larger . If you increase the value too m uch, Pixelation (the Pix els image becoming noticeably rough) will occur . Normally , we recommend 150 to 200% f or highly processed pr int images. Radius: If you adjus[...]

  • Seite 80

    80 SNAPSHO T When the Snapshot button is clic ked, the current prescan image is stored in the Snapshot Displa y Area temporarily and displayed as a thumbnail. When the thumbnail in the Snapshot Displa y Area is double-click ed, that image is display ed in the Prescan tab . This is conv enient when storing the image correction temporarily while proc[...]

  • Seite 81

    DiMA GE Scan Multi PRO 81 CANCELLING THE IMA GE CORRECTION CANCELLING THE IMA GE CORRECTION When is clicked, the current image correction is cancelled and the image returns to the previous one. REDO THE CORRECTION When is clicked, the cancelled image correction can be resumed. DELETE THE IMA GE CORRECTION When in the Image Correction tab is clicked[...]

  • Seite 82

    82 1. Click on .in the Image Correction tab. • When is clicked, the siz e of the pre and post correction image is automatically changed according to the size of the Main windo w . CHECKING THE CORRECTION RESUL T WHILE LINING UP IMA GES When is clicked, the Image correction tab is divided into right and left sides, the pre-correction image is disp[...]

  • Seite 83

    DiMA GE Scan Multi PRO 83 The image correction setting in the correction window can be sa ved as an image correction job . Y ou can easily correct the image by loading the most appropriate pre viously sav ed correction job . SA VING AN IMA GE CORRECTION JOB 1. Click on in the Image Correction tab. • The Register Image Correction Job dialog bo x i[...]

  • Seite 84

    84 JOB SA VE / JOB LO AD LO ADING IMA GE CORRECTION JOB This function allows y ou to load the sav ed correction job and apply an image correction to the displa yed image. 1. Click on in the Image Correction tab. • The Selected Image Correction Job dialog bo x is displa yed. 2. Select the Image Correction job and click on . Image Correction job di[...]

  • Seite 85

    DiMA GE Scan Multi PRO 85 DIGIT AL ICE / DIGIT AL ROC / DIGIT AL GEM BEFORE USING THE DIGIT AL ICE/R OC/GEM FUNCTION WINDO WS When connecting with the SCSI interface With Digital ICE/Digital ROC/Digital GEM function turned on. With Digital ICE/Digital ROC/Digital GEM function, and loading with a 16-bit resolution turned on. When connecting with the[...]

  • Seite 86

    86 DIGIT AL ICE / DIGIT AL R OC / DIGIT AL GEM MA CINT OSH When connecting with the SCSI interface With Digital ICE/Digital ROC/Digital GEM function turned on. With Digital ICE/Digital ROC/Digital GEM function, and loading with a 16-bit resolution turned on. When connecting with the IEEE1394 interface With Digital ICE/Digital ROC/Digital GEM functi[...]

  • Seite 87

    DiMA GE Scan Multi PRO 87 1. Click on in the main window . • The Digital ICE function is turned on. When the pre view scan and final scan are perf or med, the image is displa yed with the visable dust, scr atches, figer prints mold etc remov ed. Howe ve r , this function has no effect when scanning a monochrome film. • When the Digital ICE func[...]

  • Seite 88

    88 The Digital ROC (Reconstruction Of Colour) function is an image correction function that can restore the colour quality of a f aded image. If the colour of the film has f aded with the passage of time, the changed colour can be corrected automatically by reconstructing colour when scanning so that a digital image with appropriate colour can be r[...]

  • Seite 89

    DiMA GE Scan Multi PRO 89 The images of de veloped film are composed of high-density gr ains. These grains sometimes clump together so that the images look rough. This function detects the grains when scanning and equalizes them. So , a sharp and smooth image can be obtained ev en when a 35mm image is magnified DIGIT AL GEM 5. Drag the Digital GEM [...]

  • Seite 90

    90 DIGIT AL GEM 9. Click on . • The image will be scanned and corrected according to the specified value (Confirm Digital GEM eff ect value). • F or operations after performing the final scan, see page 98. • When scanning a B&W film, the Digital GEM function is not av ailable . • When using the Digital GEM function, be sure to perf or m[...]

  • Seite 91

    DiMA GE Scan Multi PRO 91 FINAL SCAN FLO W SCAN SETTING Creating a job Deleting a job Job type CUST OM WIZARD FINAL SCAN[...]

  • Seite 92

    92 SCAN SETTINGS The scan settings determine your final image ’ s resolution, dimensions, and file siz e, as well as helping determine the image quality . Y ou can select a Job (see pages 96, 110 to 123) to hav e the scan settings selected f or you or you can directly enter them into the Main windo w (Index tab or Prescan tab). THE SCAN SETTINGS [...]

  • Seite 93

    DiMA GE Scan Multi PRO 93 SCAN SETTINGS Image resolution is the number of pix els per inch (ppi or dpi) that represent your scanned image. The siz e of an image file is deter mined by its siz e (dimensions) and resolution. The rule to follo w when scanning is "bigger is better". T o obtain the best results , set the output resolution to t[...]

  • Seite 94

    94 SCAN SETTINGS 4. Enter the desired input/output resolution from the input and the output resolution drop-do wn list. • V alues can also be entered into the output resolution list bo x directly . Input Resolution list bo x The value with “ # ” is the def ault setting. < When selecting 35 mm or Multi Format 35mm > 4800/2400/1600/#1200/[...]

  • Seite 95

    DiMA GE Scan Multi PRO 95 CREA TING / DELETING JOB FILES CREA TING A JOB In addition to the Job settings included with the software , it is possible to create and sa ve y our own Job settings. 1. Set the desired settings in the Main window (Index tab or Prescan tab). 2. Click on . The Job Registr y dialog bo x will appear . 3. Name the job by enter[...]

  • Seite 96

    96 WHA T A JOB? Bef ore scanning, it is necessar y to make v arious settings in the Scan Settings window (see page 92) such as the amount of detail required to read the original film (input resolution), the amount of detail required f or output (output resolution), the size required f or output (output size/magnifications), etc. It is impor tant th[...]

  • Seite 97

    DiMA GE Scan Multi PRO 97 SCAN JOB TYPE Bef ore making the final scan, the scanner needs to know how big the final image will be and the quality of output that will be used (printer , monitor , etc.) so it knows what resolution to scan the film. Using the Job function is a quick and easy w ay to enter the scan settings . SCAN JOB CA TEGOR Y DESCRIP[...]

  • Seite 98

    98 Scan the film according to the Prescan settings. With the DiMA GE Scan Multi PRO utility software , you can sav e the final scan in one of the f ollowing file f or mats. • JPEG • TIFF (No compression) • BMP (Windows only) • PICT (Macintosh operating system only) The image files of 48 bit (16 bit each RGB) can only be sav ed in the TIFF f[...]

  • Seite 99

    DiMA GE Scan Multi PRO 99 UTILITY SOFTW ARE With the Prescan image display ed in the Prescan tab... 1. Click on in the Main window . • Y our system ’ s standard sav e dialog box will appear . 2. Enter the desired file name and select the file destination. 3. Select the file type from the drop-do wn list. • With Macintosh, a PICT file which wi[...]

  • Seite 100

    100 CUST OM WIZARD 1. Click on in the Main window . • The Custom Wizard window is displa yed. • When the Custom Wizard Setting window is displa yed f or the first time, “ Ne w ” is selected. • When specifying a new auto oper ation setting, select [New]. 2. Select the auto operation setting and click on . • The Film window is displa yed.[...]

  • Seite 101

    DiMA GE Scan Multi PRO 101 CUST OM WIZARD 3. Select the format of the film to be scanned and clic k on . • The Pref erences dialog box is displa yed. • F or details of “ A uto Expose for Slides ” , “ Auto F ocus at Scan ” , “ Colour depth ” or “ Multi Sample Scan ” , see “ SETTING THE PREFERENCES ” on page 29. • F or detai[...]

  • Seite 102

    102 5. Select whether or not to use you use the Digital ICE/ROC/GEM function and c lick on . • The Scan Setting window is displa yed. • F or details of the settings, see “ SCAN SETTINGS ” window on page 92. 6. Set the resolution and siz e of the image to be scanned and clic k on . • The Image Correction window is displa yed. CUST OM WIZAR[...]

  • Seite 103

    DiMA GE Scan Multi PRO 103 7. Set the desired image correction and click on . • The End of Setting window is displa yed. • The scanning star ts and the End of Scanning window is displa yed. When [Sav e] is click ed, the setting can be sav ed and named. The sav ed setting can be selected by specifying its name in the Custom Wizard Setting window[...]

  • Seite 104

    104 9. When the operation is completed, clic k on . • Custom Wizard will end. When continuing to scan with the same setting, clic k on on the scanning complete screen. • Scanning will star t again. CUST OM WIZARD WHEN ST ARTING A REGISTERED SETTING Scanning can be operated easily b y calling up the registered setting by the Custom Wizard. 1. Pl[...]

  • Seite 105

    DiMA GE Scan Multi PRO 105 APPENDIX SCAN JOB FILE LIST GLOSSAR Y TROUBLE SHOO TING USER TECHNICAL SUPPORT SPECIFICA TIONS IEEE 1394 INTERF A CE COLOUR MA TCHING[...]

  • Seite 106

    106 IEEE 1394 INTERF A CE The IEEE1394 (FireWire f or Macintosh by Apple Computer , Inc.) Interf ace has a High-speed serial bass standard which enables you to connect peripheral units such as scanners , exterior CD-R drive, etc. together with digital equipment such as a video camera to a personal computer . Since the IEEE1394 Interf ace connection[...]

  • Seite 107

    DiMA GE Scan Multi PRO 107 COLOUR MA TCHING Reproducing the colour and gradation of the image data y ou hav e captured with the scanner will diff er , depending on the characteristics of the output unit (monitor or pr inter). In order to lessen the diff erence in colour reproduction, it is necessar y to match the colour pref erence that deals with [...]

  • Seite 108

    108 COLOUR MA TCHING OUTPUT COLOUR SP A CE SETTING 1. Inser t a chec k mark in the “ Colour Matching ON ” chec kbo x. 2. Click the pull-down men u button in the Output Colour Space list bo x. The av ailable output colour space settings are display ed. 3. Click the desired output colour space setting. ICC PROFILE SETTING 1. Inser t a chec k mark[...]

  • Seite 109

    DiMA GE Scan Multi PRO 109 The supplied CD-ROM includes the ICC profile f or other colour matching tool. (The director y or file name f or Windows or Macintosh is shown respectiv ely .) This ICC profile is used f or images (except the images with 16-bit linear) of the positiv e film that hav e been scanned with the Colour Matching function OFF sett[...]

  • Seite 110

    110 SCAN JOB FILE LIST — 35 mm &DWHJRU -REQDPH ,QSXW5HV 2XWSXW5HV 0DJ 8QLW ,QSXW6L]H /RFN,1 2XWSXW 6L]H /RFN287 ,QSXW :+ :+ : +        'HIDXOW 'HIDXOW   [...]

  • Seite 111

    DiMA GE Scan Multi PRO 111 SCAN JOB FILE LIST — 35 mm[...]

  • Seite 112

    112 SCAN JOB FILE LIST — 120/220 (6x4.5) &DWHJRU -REQDPH ,QSXW5HV 2XWSXW5HV 0DJ 8QLW ,QSXW6L]H /RFN,1 2XWSXW 6L]H /RFN287 ,QSXW :+ :+ :+        'HIDXOW 'HIDXOW   [...]

  • Seite 113

    DiMA GE Scan Multi PRO 113 SCAN JOB FILE LIST — 120/220 (6x4.5)[...]

  • Seite 114

    114 SCAN JOB FILE LIST — 120/220 (6x6) &DWHJRU -REQDPH ,QSXW5HV 2XWSXW5HV 0DJ 8QLW ,QSXW6L]H /RFN,1 2XWSXW 6L]H /RFN287 ,QSXW :+ : + :+        'HIDXOW 'HIDXOW   ?[...]

  • Seite 115

    DiMA GE Scan Multi PRO 115 SCAN JOB FILE LIST — 120/220 (6x6)[...]

  • Seite 116

    116 SCAN JOB FILE LIST — 120/220 (6x7) &DWHJRU -REQDPH ,QSXW5HV 2XWSXW5HV 0DJ 8QLW ,QSXW6L]H /RFN,1 2XWSXW 6L]H /RFN287 ,QSXW :+ :+ :+        'HIDXOW 'HIDXOW   ?[...]

  • Seite 117

    DiMA GE Scan Multi PRO 117 SCAN JOB FILE LIST — 120/220 (6x7)[...]

  • Seite 118

    118 SCAN JOB FILE LIST — 120/220 (6x8) &DWHJRU -REQDPH ,QSXW5HV 2XWSXW5HV 0DJ 8QLW ,QSXW6L]H /RFN,1 2XWSXW 6L]H /RFN287 ,QSXW :+ :+ :+        'HIDXOW 'HIDXOW   ?[...]

  • Seite 119

    DiMA GE Scan Multi PRO 119 SCAN JOB FILE LIST — 120/220 (6x8)[...]

  • Seite 120

    120 SCAN JOB FILE LIST — 120/220 (6x9) &DWHJRU -REQDPH ,QSXW5HV 2XWSXW5HV 0DJ 8QLW ,QSXW6L]H /RFN,1 2XWSXW 6L]H /RFN287 ,QSXW :+ : + : +        'HIDXOW 'HIDXOW  ?[...]

  • Seite 121

    DiMA GE Scan Multi PRO 121 SCAN JOB FILE LIST — 120/220 (6x9)[...]

  • Seite 122

    122 SCAN JOB FILE LIST — MUL TI FORMA T 35 mm &DWHJRU -REQDPH ,QSXW5HV 2XWSXW5HV 0DJ 8QLW ,QSXW6L]H /RFN,1 2XWSXW 6L]H /RFN287 ,QSXW :+ :+ :+        'HIDXOW 'HIDXOW  ?[...]

  • Seite 123

    DiMA GE Scan Multi PRO 123 SCAN JOB FILE LIST — MUL TI FORMA T 35 mm[...]

  • Seite 124

    124 GLOSSAR Y BRIGHTNESS The lightness or darkness of the image. CHANNEL The component of an image. Y our scanned image has three channels: red, green, and b lue (RGB). CONTRAST The gradation of shades in an image . A high contrast image has very dark areas and br ight areas without man y middle shades. A low contrast image has many tones that are [...]

  • Seite 125

    DiMA GE Scan Multi PRO 125 GLOSSAR Y RGB Red, Green, and Blue. These are the colors of the three channels that make up the scanned image . Monitors use red, green, and blue phosphors to create the image you see on the screen. SCSI (Ultra SCSI) Ultra SCSI (F ast-20) is one variation of the SCSI-3 standards now being promoted by ANSI (American Nation[...]

  • Seite 126

    126 TR OUBLE SHOO TING • Load film into the film holder . • Scanner door opened during setup. Close scanner door . The computer will not star t up after connecting the scanner . • Shut down the computer and all the de vices in your SCSI or IEEE 1394 chain, then check the SCSI or IEEE 1394 cables and A C pow er cord. DS_Multi PRO does not appe[...]

  • Seite 127

    DiMA GE Scan Multi PRO 127 USER TECHNICAL SUPPORT Please contact your dealer f or inf or mation regarding installation, SCSI or IEEE1394 interf ace recommendations, or application compatibility . If your dealer is unable to help y ou, contact an authorized Minolta ser vice center . Please have the f ollowing inf ormation ready when calling Minolta [...]

  • Seite 128

    128 SPECIFICA TIONS T ype: Multi-f or mat film scanner up to mid-f or mat Usable Film: 35mm, 120/220 (6x4.5, 6x6, 6x7, 6x8, 6x9) - negativ e/ positive , color/ B&W TEM Film, T ransparent Media, 16mm, Glass plate Scanning Dimensions: 35mm - 25.0 x 37.1mm (4728 x 7008 pixels) 120/220 (6x4.5, 6x6, 6x7, 6x8, 6x9) - 56.58 x 83.8mm (10692 x 15840 pix[...]

  • Seite 129

    • T esting Conditions IBM PC/A T CPU: P entium IV 1.5GHz, RAM: 1GB OS: Windows 2000 Prof essional Interf ace: IEEE1394:Adaptec AFW4300, Host Application: Adobe Photoshop 6.0 AE: off; Digital ICE3: OFF Macintosh CPU: P ow erPC G4/533MHz RAM: 1.5GB OS: Mac OS 9.1 Interf ace: FireWire DiMA GE Scan Multi PRO 129 Index-Scan Windows: 35mm Color P ositi[...]