Minolta CF2002 Bedienungsanleitung

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156

Zur Seite of

Richtige Gebrauchsanleitung

Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung Minolta CF2002 an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von Minolta CF2002, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.

Was ist eine Gebrauchsanleitung?

Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung Minolta CF2002 die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.

Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung Minolta CF2002. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.

Was sollte also eine ideale Gebrauchsanleitung beinhalten?

Die Gebrauchsanleitung Minolta CF2002 sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts Minolta CF2002
- Den Namen des Produzenten und das Produktionsjahr des Geräts Minolta CF2002
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts Minolta CF2002
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen

Warum lesen wir keine Gebrauchsanleitungen?

Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von Minolta CF2002 zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von Minolta CF2002 und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service Minolta finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von Minolta CF2002 zu überspringen, wie es bei der Papierform passiert.

Warum sollte man Gebrauchsanleitungen lesen?

In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts Minolta CF2002, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.

Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von Minolta CF2002 widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.

Inhaltsverzeichnis der Gebrauchsanleitungen

  • Seite 1

    CF2002/CF3102 User Man ual [ Basic Operations ] 2 Before Making Copies Basic Copy Operations Loading Paper Original Documents Specifying Copy Settings Controlling Jobs[...]

  • Seite 2

    Con tent s CF2002/CF3 102 i Cont ents The topics list ed below are desc ribed in t he Basic Op erations v olume. For deta ils on oth er topics, ref er to the Adm inistrator Ope rations an d the Advanc ed Operat ions vol umes of t he User Ma nual and t he Enla rge Display Mode Op erat ion Gui de. 1 Before Making Copies 1.1 Introduction .. ..........[...]

  • Seite 3

    Con tent s ii CF 2002/CF3102 2 Basic Copy Operations 2.1 Making Ba sic Copies ........... ................. ................. ................. ...... 2-2 2.2 Practical Cop y Examples .... ................. ................. ................. ...... 2 -5 To make a copy that is the s ame size as the origi nal ............... ...... 2-5 To make an en[...]

  • Seite 4

    Con tent s CF2002/CF 3102 iii To set t he “ Specia lty Paper ” fu nction ........................... .................3-20 Loading Paper Into the Manual By pass Tra y ..................... ........... 3-21 4 Original Documents 4.1 Document F eeding ................... ................. ................. ................. .. 4-2 Documen t Types [...]

  • Seite 5

    Con tent s iv CF 2002/CF3102 5.4 Selecting th e Paper Setting ................. ................. ................. .... 5-12 Selectin g the Paper Setting Auto matically ( “ Auto Pape r ” Setting).................. ................. ................. ............... 5-12 Selectin g the Paper Manually ............ ................ ..............[...]

  • Seite 6

    Con tent s CF2002/CF3 102 v 6 Controlling Jobs 6.1 Descrip tion of Jobs....... ................. ................. ................. ............. 6-2 Job ............ ................ ................. ................. ................. ................. .. 6-2 Multi-j ob feature ........ ................. ................. ................. ....[...]

  • Seite 7

    Con tent s vi CF 2002/CF3102 Administrator Operations For det ails on the f ollowing to pics, ref er to the Admin istrator Opera tions volume of this U ser Manu al. 1I n t r o d u c t i o n 2 Safety In formation 3 Precautions 4 Part Names an d Their Functio ns 5 Utility Mode Operations 6 Touch Panel Messages 7 Troubleshooti ng 8 Appendix Advanced O[...]

  • Seite 8

    Before Making C opies Chapter 1 1 1 Before Making Copies[...]

  • Seite 9

    1 1.1 Introd uction 1-2 CF 2002/CF3 102 Before Making C opies Chapter 1 1.1 Introduction Structure of the Manual The various ex planation s for thi s copier are divide d into fo ur parts: t he Admini strator Operati ons, Basic Operations and Advanc ed Operati ons volumes of the User Ma n- ual, an d the Enlarg e Displ ay Mode Op eration G uide. The [...]

  • Seite 10

    1.1 Introducti on 1 CF2002/CF3 102 1- 3 Before Making C opies Chapter 1[...]

  • Seite 11

    1 1.2 Avail able Featu res 1-4 CF 2002/CF3 102 Before Making C opies Chapter 1 1.2 Availabl e Feat ures The mai n functio ns avail able with th is mach ine are de scribed b elow. Opera ting pro- cedures are provi ded in c hapter 2 “ Basic Copy Operati ons ” and chapter 5 “ Spec i- fying C opy Setting s ” . Color Settings “ Auto Color ” [...]

  • Seite 12

    1.2 Available Features 1 CF2002/CF3 102 1- 5 Before Making C opies Chapter 1 Finishing Setting s Stapling Copies are stapled t ogether be fore they a re fed out. Stapling i s only a vailable if the option al finish er (FN-8 or FN-116) is installe d. Hole-p unching Holes a re punche d in copies before the y are fed o ut. Hole-pun ching is only avai [...]

  • Seite 13

    1 1.2 Avail able Featu res 1-6 CF 2002/CF3 102 Before Making C opies Chapter 1 “ Custo mZoom ” setti ng G Any zo om ra tio ( betw een × 0.250 and × 4.0 00) can b e specifi ed. ❍ Use t he keypad to enter the des ired zoom ra tio. ❍ In addi tion, up to two zoom r atios spe cified u sing the key pad can be stored for later use. “ X/Y Zoom [...]

  • Seite 14

    1.2 Available Features 1 CF2002/CF3 102 1- 7 Before Making C opies Chapter 1 Orig Ö Copy Setting s Single-s ided orig inals Select th is settin g to copy s ingle-sid ed documen ts. Doubl e-sided or iginals Select th is settin g to copy do uble-side d documents . Single-s ided copies Select th is settin g to make s ingle-sid ed copies. Automati c d[...]

  • Seite 15

    1 1.2 Avail able Featu res 1-8 CF 2002/CF3 102 Before Making C opies Chapter 1 Bound bo oklet co pies Select t his setti ng to make b ound book lets from the copi es. Single-s ided 4in 1 copies Select th is settin g to reduce fo ur document pages to fit one si ngle-sided copy p age. Doubl e-sided 4in1 copies Select t his setti ng to red uce eigh t [...]

  • Seite 16

    1.2 Available Features 1 CF2002/CF3 102 1- 9 Before Making C opies Chapter 1 Photo Settings “ Text&Phot o ” setting Select th is settin g when cop ying doc uments con taining b oth text an d im- ages. “ Photo Im age ” setti ng Select th is settin g when cop ying photogra phs (docu ments) printe d on phot ographic paper. “ Printed Im a[...]

  • Seite 17

    1 1.2 Avail able Featu res 1-10 CF 2002/CF3 102 Before Making C opies Chapter 1 Densty Setti ngs “ Backgro und ” param eter ( “ Density ” function) G This pa rameter ca n be used to adjust th e density of the back ground co lor for docum ents with a backgrou nd color. “ Density ” paramete r ( “ Density ” function) G This pa rameter [...]

  • Seite 18

    1.2 Available Features 1 CF2002/CF3 102 1-11 Before Making C opies Chapter 1[...]

  • Seite 19

    1 1.3 Nam es of Cont rol Panel Pa rts and The ir Functions 1-12 CF 2002/CF3 102 Before Making C opies Chapter 1 1.3 Names of Control Panel Parts and Their Functions No. Part Name Description 1 Touch p anel • Displays variou s screens an d message s See p. 1-20 2k e y p a d • Use to type in the numb er of copi es to be made. • Use to ty pe in [...]

  • Seite 20

    1.3 Names of Contro l Panel Parts an d Their Fu nctions 1 CF2002/CF3 102 1-13 Before Making C opies Chapter 1 * Job: Any se t of consec utive ope rations, su ch as tho se for ma king copie s, scans or comput er printou ts 9 [Panel Rese t] key • Press to reset al l copy mode s and funct ions to th eir default settings. (A ll selected setting s* ar[...]

  • Seite 21

    1 1.4 Adjus ting the Ang le of the Co ntrol Panel 1-14 CF 2002/CF3 102 Before Making C opies Chapter 1 1.4 Adjusting the Angle of the Control Panel The control pa nel can be a djusted to any of th ree angles . Adjust t he control panel to the angle that allows for easy operation.[...]

  • Seite 22

    1.4 Adjusti ng the Ang le of the Co ntrol Panel 1 CF2002/CF3 102 1-15 Before Making C opies Chapter 1 To adjust the angle of th e control pane l 1 Pull the con trol panel rel ease leve r toward you, and t hen push down on the c ontrol pan el. 2 The angl e of the c ontrol pan el stops a t the midd le posit ion. 3 To adjus t the con trol panel to a n[...]

  • Seite 23

    1 1.5 Tu rning the Copier On a nd Off 1-16 CF 2002/CF3 102 Before Making C opies Chapter 1 1.5 Turning the Copier On and O ff To turn the c opier on ➜ Set the po wer switch to “ I ” . When the copier is turned on 1 The indi cator on t he [Start] key l ights up in orange . A screen indicati ng that th e machine i s starting up appears. 2 After[...]

  • Seite 24

    1.5 Turning the Cop ier On an d Off 1 CF2002/CF3 102 1-17 Before Making C opies Chapter 1 G The con ditions fo r all modes and funct ions automa tically returning to their de- fault settings ca n be spec ified usi ng the “ Auto Pane l Reset ” function on t he Us- er ’ s Choice: 1 screen. Fo r more details , refer to “ Sp ecifying Defa ult S[...]

  • Seite 25

    1 1.5 Tu rning the Copier On a nd Off 1-18 CF 2002/CF3 102 Before Making C opies Chapter 1 To rec over from Sleep mode ➜ Press the [Sta rt] key. (The S leep mode c an also b e canceled by press ing any key on the op eration panel o r by touch ing the to uch panel.) Then, con tinue wit h the operatio ns described in “ When the co pier is turned [...]

  • Seite 26

    1.5 Turning the Cop ier On an d Off 1 CF2002/CF3 102 1-19 Before Making C opies Chapter 1 To turn the c opier off 1 Touch [J ob Log] to check that no jobs are queued. 2 If any c opies or p rintouts re main in the outp ut tray, remov e them. 3 Set the po wer switch to “ O ” . ✎ Note Do not t urn off the copi er while it i s making co pies or p[...]

  • Seite 27

    1 1.6 Us ing the Touc h Panel 1-20 CF 2002/CF3 102 Before Making C opies Chapter 1 1.6 Using the Touch Panel Description of the Touch Pa nel When th e copie r is turne d on (w hen the p ower switch is set to “ I ” ), th e screen shown below appears in the touc h panel. This scre en is the Basic screen. It sh ows, with messages a nd graphic s, t[...]

  • Seite 28

    1.6 Usin g the Touc h Panel 1 CF2002/CF3 102 1-21 Before Making C opies Chapter 1 ✎ Tip The lang uage of th e displa ys in the touch pan el can b e changed using the “Languag e Selected ” function on the Admin . Mode: Admin . set screen . For more det ails, refe r to “Administr ator Mode Op erations” o f “Utility M ode Operati ons” in[...]

  • Seite 29

    1 1.6 Us ing the Touc h Panel 1-22 CF 2002/CF3 102 Before Making C opies Chapter 1 Structure of the Display Sett ings s creen 5 Job display 6 Job Log screen 1 Message display 2 Screen tabs 4 Selected settings 3 Available functions/settings[...]

  • Seite 30

    1.6 Usin g the Touc h Panel 1 CF2002/CF3 102 1-23 Before Making C opies Chapter 1 * Job: Any s et of conse cutive op erations, su ch as those for making copies, scans, or co mputer print outs, etc. Operating the Touch Pan el To acti vate a fun ction or to select a setting, l ightly touc h the des ired function or set- ting sh own on t he touch p an[...]

  • Seite 31

    1 1.6 Us ing the Touc h Panel 1-24 CF 2002/CF3 102 Before Making C opies Chapter 1[...]

  • Seite 32

    Basic Co py Operation s Chapter 2 2 2 Basic Copy Operations[...]

  • Seite 33

    2 2.1 Mak ing Basic Copi es 2-2 CF 2002/CF3 102 Basic Co py Operation s Chapter 2 2.1 Making Basi c Copies The procedure for m aking basi c copies is descri bed below. Check th at the [Copy ] key indi cator is li t in green and that the co pier is in Cop y mode. • If the [Sc an] key is lit in green, pr ess the [Copy] key. Press the [Panel Reset ][...]

  • Seite 34

    2.1 Maki ng Basic C opies 2 CF2002/CF3 102 2- 3 Basic Co py Operation s Chapter 2 Make sure that the Zoom setting “ × 1. 000 ” is sele cted. • For details, refer to “ Specifying a Zoom Se tting ” (p. 5-8). Make sure that the P aper set ting “ Auto Paper ” is selected. • For details, refer to “ Selecti ng the P aper Setti ng ” ([...]

  • Seite 35

    2 2.1 Mak ing Basic Copi es 2-4 CF 2002/CF3 102 Basic Co py Operation s Chapter 2 Tou ch [Job Log]. • The pri nting stat us of t he progr ammed j ob and the job ’ s settings can be viewed. • For deta ils, refer to “ Contro lling Jobs ” (p. 6-1). To quit co pying, press the [Stop] ke y.[...]

  • Seite 36

    2.2 Practical Copy Examples 2 CF2002/CF3 102 2- 5 Basic Co py Operation s Chapter 2 2.2 Practical Copy Ex amples Exampl es of various basic copy ope rations are de scribed b elow. Refer to the fol lowing pro cedures for d etails o n performing the vari ous copy o pera- tions. ✎ Note These e xplanatio ns assume that al l functions , such as those [...]

  • Seite 37

    2 2.2 Pra ctical Cop y Examples 2-6 CF 2002/CF3 102 Basic Co py Operation s Chapter 2 To make an enlarged c opy of the do cument An exam ple for ma king one single-sid ed 11 × 17-s ize enla rgement from a single- sided Letter-siz e original is describ ed below . Load the docum ent into the duplexin g documen t feed er. When loadin g the docu ment,[...]

  • Seite 38

    2.2 Practical Copy Examples 2 CF2002/CF3 102 2- 7 Basic Co py Operation s Chapter 2 To ma ke a reduce d copy of the document An exam ple for ma king one single-sid ed Letter-s ize reductio n from a s ingle-sided 11 × 17-s ize origi nal is desc ribed bel ow. Load the document into the duplex ing docume nt feeder. When loadin g the docu ment, load i[...]

  • Seite 39

    2 2.2 Pra ctical Cop y Examples 2-8 CF 2002/CF3 102 Basic Co py Operation s Chapter 2 To reduce paper use An exam ple for co pying four single- sided Letter-s ize doc uments onto one singl e- sided Letter-siz e page is de scribed b elow. Load the docum ent into the duplexin g documen t feed er. When lo ading the document , load it so that the sid e[...]

  • Seite 40

    2.2 Practical Copy Examples 2 CF2002/CF3 102 2- 9 Basic Co py Operation s Chapter 2 To make copies fro m a book or m agazine An exam ple for ma king two s eparate sing le-sided Letter C-siz e copies fro m an open Le tter-size b ook is descri bed below. 1 2 2 1 Pos itio n the book face do wn ont o the ori gin al glas s. When po sitioning the docum e[...]

  • Seite 41

    2 2.2 Pra ctical Cop y Examples 2-10 CF 2002/CF3 102 Basic Co py Operation s Chapter 2 To co py a postcard An exam ple for ma king a s ingle-sided copy from a singl e-sided pos tcard onto a postca rd loaded into the m anual by pass tray is describ ed below. Position the p ostcard document face down o nto the origina l glass. When posi tioning the d[...]

  • Seite 42

    2.2 Practical Copy Examples 2 CF2002/CF3 102 2-11 Basic Co py Operation s Chapter 2 Prepare one postc ard. Load the postcar d into the m anual bypass tray w ith the top of th e postcard enterin g the feed slo t and th e sid e to be pr inte d onto f acing do wn. (T he sid e wher e the addre ss is written sh ould face u p.) Adjust the paper gu ides t[...]

  • Seite 43

    2 2.3 Stoppi ng Printing 2-12 CF 2002/CF3 102 Basic Co py Operation s Chapter 2 2.3 Stopping Printing A job ca n be canc eled whil e it is be ing printe d. To stop/res tart/delete a p rint job 1 Pres s the [ Stop ] key wh ile t he job is bei ng pri nt ed. The p rint ing stops . The mess age “ Job has been st opped. ” ap- pears. 2 To conti nue p[...]

  • Seite 44

    2.3 Stopping Printi ng 2 CF2002/CF3 102 2-13 Basic Co py Operation s Chapter 2[...]

  • Seite 45

    2 2.4 Interru pting a Cop y Job 2-14 CF 2002/CF3 102 Basic Co py Operation s Chapter 2 2.4 Interrupting a Copy Job The job being pri nted can b e interrupt ed. This m ode is c onvenient for pausin g the cu rrent copy job in o rder to make a quick copy o f a differen t docume nt. For de tail s on pri orit izi ng a copy job s o that it will b e prin [...]

  • Seite 46

    2.4 Interrup ting a Co py Job 2 CF2002/CF3 102 2-15 Basic Co py Operation s Chapter 2 7 If the job that pri nting was inte rrupted for is ready for pri nting, the int errupted job stops b eing print ed and the job that p rinting w as interrupte d for is pri nted. When pri nting is f inished, the job that p rinting was interrupted for is remov ed fr[...]

  • Seite 47

    2 2.5 Maki ng Test C opies (Co py 1 Set) 2-16 CF 2002/CF3 102 Basic Co py Operation s Chapter 2 2.5 Making Test Copies (Copy 1 Set) Before pr inting a large num ber of copie s, a sample copy can be printe d so you can check the specifi ed settin gs. This is conveni ent for che cking the s elected s ettings befor e pri nti ng. If a j ob is curren tl[...]

  • Seite 48

    2.5 Maki ng Test C opies (Cop y 1 Set) 2 CF2002/CF3 102 2-17 Basic Co py Operation s Chapter 2 6 If the rem aining n umber of copi es cann ot be made with the curren t settings, touch [N o]. The rema ining num ber of co pies of th e job for the te st print i s cancel ed. The me ssage “ Job has been do ne improp erly. Check the re cord. ” ap- pe[...]

  • Seite 49

    2 2.6 Mak ing Copies Using Acc ounts 2-18 CF 2002/CF3 102 Basic Co py Operation s Chapter 2 2.6 Making Copies Using Accounts Using the “ Copy Track” Function The total number of co pies allowe d and the cop ies allowe d for certain siz es can be set for u p to 99 ac counts. G If t he “ Copy Trac k ” function is used, printi ng is only pos s[...]

  • Seite 50

    Loading P aper Chapter 3 3 3 Loading Paper[...]

  • Seite 51

    3 3.1 Pape r Specific ations 3-2 CF 2002/CF3 102 Loading P aper Chapter 3 3.1 Paper Specifica tions Use p aper that mee ts the fol lowing spe cificati ons. Paper Type s Paper T ype Plain Pape r Thick Paper 1 Thick Paper 2 Thick Paper 3 Weight ( lbs.) Paper So urce, Etc. 17 lbs. to 2 4 lbs. 24-1/4 lbs. to 40 lbs. 40-1/4 lbs. to 55-1/2 l bs. 55-3/4 l[...]

  • Seite 52

    3.1 Paper Specific ations 3 CF2002/CF3 102 3- 3 Loading P aper Chapter 3 Paper Sizes Non-st andard paper: Standard pap er: Paper S ource Paper W idth Paper Length Manual by pass tra y 3-9/16 in. to 12-1/4 in. 5-1/2 in. to 18 in. 1st draw er 2nd draw er —— Paper feed unit *1 Large ca pacity cab inet *1 —— Paper S ize Paper S ource, Etc. 12.2[...]

  • Seite 53

    3 3.1 Pape r Specific ations 3-4 CF 2002/CF3 102 Loading P aper Chapter 3 Paper Capac ity *1 The pape r feed uni t and large capacit y cabine t are optio nal. *2 If the optional dup lex unit is used to make d ouble-si ded copie s, only cert ain types o f paper ca n be used . *3 If the optional f inisher is us ed to sort, punch hol es and staple , o[...]

  • Seite 54

    3.1 Paper Specific ations 3 CF2002/CF3 102 3- 5 Loading P aper Chapter 3 ✎ Note The f ollowing ty pes of pa per shoul d not be u sed, otherwi se decre ased print quality or paper m isfeeds ma y occur. Overhe ad transparen cies that have al ready been fed through the copi er (even if th e tran spar ency is still bla nk) Paper that has been printed[...]

  • Seite 55

    3 3.2 Print Area 3-6 CF 2002/CF3 102 Loading P aper Chapter 3 3.2 Print Area Any part of the ima ge within t he area in dicated b elow is no t printed. G A mar gin 0.2 in. (5 mm) from t he leading e dge of the paper (A) G A mar gin 0.12 in. (3 mm) from the trailing e dge of the paper (B) G A margin 0.1 2 in. (3 mm) on both sides of the pape r (C) ([...]

  • Seite 56

    3.4 Automatic ally Selecti ng the Paper Source 3 CF2002/CF3 102 3- 7 Loading P aper Chapter 3 3.4 Automatically Selecting the Paper Source If the sele cted paper d rawer runs o ut of paper while a print job is being copi ed and a differe nt paper d rawer is loaded with paper m eeting th e followin g condit ions, the othe r paper drawer is a utomati[...]

  • Seite 57

    3 3.5 Loadi ng Paper 3-8 CF 2002/CF3 102 Loading P aper Chapter 3 3.5 Loading Paper Loading Pa per Into th e 1st Drawer 1 Pull out the paper d rawer for t he 1st drawer. 2 Press do wn on the p aper-liftin g plate un til it loc ks into place. ✎ Note Be careful not to touc h the sur- face of the paper take-u p roller with y our hands. 3 Slide the l[...]

  • Seite 58

    3.5 Loading Paper 3 CF2002/CF3 102 3- 9 Loading P aper Chapter 3 5 Load the pap er into the dr awer so that the side of th e paper to b e print ed onto (the s ide facing up when t he packa ge was un- wrappe d) faces u p. 6 When ma king man ual doub le-sid- ed copi es, load the paper so t hat the sec ond side (the blank side ) face s up. ✎ Note If[...]

  • Seite 59

    3 3.5 Loadi ng Paper 3-10 CF 2002/CF3 102 Loading P aper Chapter 3 ✎ Tip When loa ding 4 × 6 L pape r, load them with the short er side as the l eading ed ge, as sh own. ✎ Note Do no t load 4 × 6 L paper crossw ise, as shown. ✎ Tip After pr essing down t he enve- lopes t o make sure that all ai r is remo ved and m aking sure that t he folds[...]

  • Seite 60

    3.5 Loading Paper 3 CF2002/CF3 102 3-11 Loading P aper Chapter 3 ✎ Note Do not load enve lopes cros s- wise, as show n. ✎ Tip When loa ding ove rhead pr o- jector tra nsparenc ies, load them with the longe r side as the lead ing edge, as show n. ✎ Note Do no t load overh ead proje ctor transpare ncies leng thwise.[...]

  • Seite 61

    3 3.5 Loadi ng Paper 3-12 CF 2002/CF3 102 Loading P aper Chapter 3 7 If pap er of a non-st andard size h as been lo aded, sli de the lat eral guides against the edges of the loaded pap er. 8 Close the paper dra wer. 9 Turn t he media typ e selec tion dial to the set ting for the type of pa per loaded. ✎ Tip If po stcards are l oaded, se t the med[...]

  • Seite 62

    3.5 Loading Paper 3 CF2002/CF3 102 3-13 Loading P aper Chapter 3 Setting the P aper Size for the 1s t Drawer Since th e size of the paper loaded into t he 1st drawer is a utomaticall y detecte d, it is usu ally not necessary t o set the p aper siz e. However, i t may be n ecessar y to set the p aper size if the pap er size is n ot automa t- ically [...]

  • Seite 63

    3 3.5 Loadi ng Paper 3-14 CF 2002/CF3 102 Loading P aper Chapter 3 To set a paper size i n metric mea surements 1 Touch [P aper]. A screen that shows the spec ified pap er size set tings app ears. 2 Select th e 1st drawe r, and then touch [Size C hange]. 3 Touch [M etric]. The I nput screen a ppears with paper si zes in metri c measur ements. 4 Sel[...]

  • Seite 64

    3.5 Loading Paper 3 CF2002/CF3 102 3-15 Loading P aper Chapter 3 6 Touch . 7 Touch and to select th e length of side Y for th e paper th at is loa ded. ❍ Touch until the cursor moves b elow the frac tion that you wis h to change. The ente red length of side Y appe ars. 8 Touch [En ter], and th en touch [Enter] in th e Input sc reen. 9 The pape r [...]

  • Seite 65

    3 3.5 Loadi ng Paper 3-16 CF 2002/CF3 102 Loading P aper Chapter 3 ❍ Touch until the curso r moves b elow the fra ction that you wi sh to change . The ente red length of side Y app ears. 8 Touch [S ize Reg istration] . 9 Touch e ither [1] or [2]. 10 Touch [E nter], an d then touch [Enter] in th e Input sc reen. The cus tom pape r size is stored. [...]

  • Seite 66

    3.5 Loading Paper 3 CF2002/CF3 102 3-17 Loading P aper Chapter 3 Loading Pa per Into the 2nd Drawer or a Paper Fe ed Unit 1 Pull out the paper draw er. 2 Press do wn on the pa per-lifting plat e unti l it lo cks i nto pl ace. ✎ Note Be car eful not to touc h the sur- face of th e pa per ta ke-up roll er with y our hands. 3 Remove the trai ling-ed[...]

  • Seite 67

    3 3.5 Loadi ng Paper 3-18 CF 2002/CF3 102 Loading P aper Chapter 3 5 Load the pap er into the draw er so that the side of th e paper to be prin ted on to (t he sid e faci ng up when the pac kage was un- wrappe d) faces u p. ✎ Note If the pap er is cur led, flatte n it before lo ading it. Do not load so muc h paper that t he top of the stack is hi[...]

  • Seite 68

    3.5 Loading Paper 3 CF2002/CF3 102 3-19 Loading P aper Chapter 3 Loading Pa per Into the La rge Capacity Cab inet 1 Pull out the paper draw er. 2 Load pap er in to the r ight sid e of the drawer so that the fron t side of the paper (the si de facing up when the pack age was un wrappe d) faces up. ✎ Note If the pap er is curled , flatten it before[...]

  • Seite 69

    3 3.5 Loadi ng Paper 3-20 CF 2002/CF3 102 Loading P aper Chapter 3 “ Special ty Paper ” function The pap er loaded into the la rge capac ity cabine t (3rd draw er) can be spe cified a s spec ial pa per. If the p aper in a drawer is spe cified as special pape r, the paper in tha t drawer is not automa tically s elected w ith the Pape r setting ?[...]

  • Seite 70

    3.5 Loading Paper 3 CF2002/CF3 102 3-21 Loading P aper Chapter 3 Loading Pa per Into the M anual Bypass Tray Paper ca n be fed m anually through th e manual by pass tray if you wi sh to cop y onto paper th at is not l oaded into a drawer, o r if you wish to copy on to special paper. 1 Touch [Pa per]. A screen that shows the specifi ed paper s ize s[...]

  • Seite 71

    3 3.5 Loadi ng Paper 3-22 CF 2002/CF3 102 Loading P aper Chapter 3 8 Touch [E nter]. 9 Touch [P aper Type] . The Pape r Type sc reen appea rs. 10 Select th e setting for the type of paper t hat is load ed. 11 Touch [E nter]. 12 Open th e manual by - pass tr ay. 13 Prepar e one sheet o f the pape r. 14 Load the paper int o the manu al bypass tray so[...]

  • Seite 72

    3.5 Loading Paper 3 CF2002/CF3 102 3-23 Loading P aper Chapter 3 ✎ Tip Before loadin g envelopes , press t hem down to make sure that all air is remov ed, and make sure that the folds of the flaps are firmly pr essed, othe r- wise t he envel opes may be - come wr inkled or a paper misfee d may occu r. Load the envelop es with th e shorter s ide a[...]

  • Seite 73

    3 3.5 Loadi ng Paper 3-24 CF 2002/CF3 102 Loading P aper Chapter 3 ✎ Tip When loa ding Overhe ad Pro- jector Tr anspar encies, loa d them with the longe r side as the lead ing edge, as show n. ✎ Note Do not load Overhe ad Projec- tor Transp arencies Le ngth- wise, as shown. 15 Adjust th e paper gu ides to fit th e size o f paper tha t is loade [...]

  • Seite 74

    Original Doc uments Chapter 4 4 4 Original Documents[...]

  • Seite 75

    4 4.1 Do cument F eeding 4-2 CF 2002/CF3 102 Original Doc uments Chapter 4 4.1 Document Feeding The doc ument ca n be fed in one of two di fferent wa ys. Be sure to position the doc- ument c orrectly accordin g to the ty pe of docume nt being copied. Document T ypes ✎ Note Be sure t o use the documen t paper ty pe appropr iate for the feed met ho[...]

  • Seite 76

    4.1 Docume nt Feeding 4 CF2002/CF3 102 4- 3 Original Doc uments Chapter 4 Multi-s heet feedi ng (Docum ent of mixed sizes) Mixed Or iginals Paper Siz es Possib le combinat ions for m ixed origina l paper s izes 2 : Possible — : Not possible Singl e-sided documen ts Doubl e-sid ed docu ments Docume nt paper type Plain paper: 13 -1/4 lbs . to 29-1/[...]

  • Seite 77

    4 4.1 Do cument F eeding 4-4 CF 2002/CF3 102 Original Doc uments Chapter 4 Docum ent Precautions (M ulti-Sheet Feed ing) The foll owing types of docu ments shou ld not be used, otherwis e paper misfeed s or damage to the do cument m ay occur. Instead, th ese type s of doc uments s hould be fed man ually. G Rolle d docume nts G Wrin kled or tor n do[...]

  • Seite 78

    4.2 Feedin g the Do cument 4 CF2002/CF3 102 4- 5 Original Doc uments Chapter 4 4.2 Feeding the Document Multi-Shee t Feeding The d uplexing do cument fe eder feeds in, scan s, then au tomatically feeds ou t each page in a multi-page document, on e page at a time. The corre ct type of do cument must b e loaded i n order for t he duplex ing docu ment[...]

  • Seite 79

    4 4.2 F eeding th e Document 4-6 CF 2002/CF3 102 Original Doc uments Chapter 4 6 Touch [O riginal Direc tion]. The Or iginal Directi on sc reen appears . 7 Select th e setting appropriate fo r your doc ument, and th en touch [Enter]. ❍ If the ori entation o f the docu ment is d ifferent fro m that of t he selected Orig- inal D irection set ting, [...]

  • Seite 80

    4.2 Feedin g the Do cument 4 CF2002/CF3 102 4- 7 Original Doc uments Chapter 4 12 When rem oving la rge-sized do cu- ments, carefully lift up th e docu- ment fee d tray (of t he duplex ing doc ument feede r) as far as poss i- ble. 13 Remove the doc uments from the docume nt output t ray. 14 Careful ly lower the docu ment feed tray. CAUTION Do not p[...]

  • Seite 81

    4 4.2 F eeding th e Document 4-8 CF 2002/CF3 102 Original Doc uments Chapter 4 To feed do cuments of m ixed size s Docu ments of various s tandard-si zed page s can be scanned and copi ed as a set using the dup lexing doc ument feeder. The combinatio ns of p aper si zes that can be used w ith the “ Mi xed Ori g Detecti on ” functio n are show n[...]

  • Seite 82

    4.2 Feedin g the Do cument 4 CF2002/CF3 102 4- 9 Original Doc uments Chapter 4 5 In th e Basic sc reen , touch [M ixed Orig Detection]. 6 Select the desired co py setting s, and the n press th e [Start] key. The topm ost page of the docume nt is fed in and sc anning be gins.[...]

  • Seite 83

    4 4.2 F eeding th e Document 4-10 CF 2002/CF3 102 Original Doc uments Chapter 4 Manua l Fe edin g Place the document di rectly on the ori ginal glass, and then it is sc anned. Each page of the d ocument m ust be p ositioned m anually (i.e ., the pr evious one must be re - moved and the ne xt one pl aced on t he origina l glass) . This m ethod is be[...]

  • Seite 84

    4.2 Feedin g the Do cument 4 CF2002/CF3 102 4-11 Original Doc uments Chapter 4 4 <For tr ansparent or translucen t docume nts> Place a b lank she et of paper of the same siz e as the d ocument ov er the doc ument. 5 <For boun d docume nts spread o ver two f acing pages , such as a book or m ag- azi ne> Position the top of the boo k towa[...]

  • Seite 85

    4 4.2 F eeding th e Document 4-12 CF 2002/CF3 102 Original Doc uments Chapter 4 7 Touch [O rig Ö Copy]. The Or iginal Ö Copy screen appears. 8 Touch [O riginal Direction]. The Origi nal Directi on screen ap pears. 9 Select th e setting appropri ate for your docum ent, and th en touch [En ter]. ❍ If the ori entation o f the docume nt is dif- fer[...]

  • Seite 86

    4.2 Feedin g the Do cument 4 CF2002/CF3 102 4-13 Original Doc uments Chapter 4 12 When us ing a mod e where m ultiple docu- ments are to be scanne d, such as w hen making 2in1 copies , the messag e sh own at t he right app ears. 13 To contin ue scannin g, remove the document, po sition the ne xt page of the doc - ument o n the origi nal glas s, and[...]

  • Seite 87

    4 4.2 F eeding th e Document 4-14 CF 2002/CF3 102 Original Doc uments Chapter 4[...]

  • Seite 88

    Specify ing Copy Settings Chapter 5 5 5 Specifying Copy Settings[...]

  • Seite 89

    5 5.1 Selec ting a Colo r Setting 5-2 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 The settings for the Copy mode ca n be chan ged to fit y our need. This c hapter exp lains how these se ttings can b e changed . 5.1 Selecti ng a Color Sett ing The Color settin g is selec ted when copies are being mad e. There are three Color settings . G Aut[...]

  • Seite 90

    5.2 Selecti ng a Fini shing Sett ing 5 CF2002/CF3 102 5- 3 Specify ing Copy Settings Chapter 5 5.2 Selecting a Finishing Setting Various settin gs for sorting and finis hing cop ies are a vailable. ✎ Tip The Finis hing setting s can be used together w ith other functi ons. For det ails, re- fer to the “ Function Combinat ion Table ” in the Ad[...]

  • Seite 91

    5 5.2 Select ing a F inishing Sett ing 5-4 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 Non-Sorting ( “ No n-Sort ” Setting) The copies are fe d out and stacked on top of e ach other as they are p rinted. Crisscro ss Non-Sortin g ( “ No n-So rt ” Setti ng) The cop ies are fe d out in a n alternating crisscross pattern. Howev er, cris[...]

  • Seite 92

    5.2 Selecti ng a Fini shing Sett ing 5 CF2002/CF3 102 5- 5 Specify ing Copy Settings Chapter 5 G The “ Cris s Cross M ode ” functio n on the User ’ s Cho ice: 2 screen must be set to “ Yes ” . ❍ For detai ls on the “ User ’ s Choice ” functions, refer to “ Spec ifying Defaul t Set- tin gs ( “ Use r ’ s Choic e ” Functions [...]

  • Seite 93

    5 5.2 Select ing a F inishing Sett ing 5-6 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 G If nonst andard- size paper i s used, th e paper wid th must be be tween 7- 1/4 in. and 11-3/4 in. G If nonst andard- size paper i s used, th e paper lengt h must be between 7-1 /4 in. and 17 in. G The copier mu st not enter Interrupt mode. To speci fy [...]

  • Seite 94

    5.2 Selecti ng a Fini shing Sett ing 5 CF2002/CF3 102 5- 7 Specify ing Copy Settings Chapter 5 ✎ Note If a stap ling or hole-punchi ng settin g is sele cted, be sure to loa d the doc u- ment so that it is position ed correc tly. If the docum ent is not po sitioned correctly , the staples or punched holes will not be po sitioned correctly . The co[...]

  • Seite 95

    5 5.3 Speci fying a Zo om Setting 5-8 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 5.3 Speci fying a Zoom Setting Copi es of do cum ents ca n be en larg ed or r educ ed. There are eight w ays to chan ge the zoo m ratio. G Automati c scaling ( “ Auto Size ” s etting) G Full size ( “ × 1.0 00 ” setting) G Enlargin g ( “ Enlarge ” [...]

  • Seite 96

    5.3 Specify ing a Zoom Setting 5 CF2002/CF3 102 5- 9 Specify ing Copy Settings Chapter 5 Minimiz ing ( “ Minima l ” Setting) The co py is slight ly re duce d ( × 0.930). G Selectin g the “ Minima l ” settin g ensures th at any part of the orig inal positi oned at the ed ge of the p age will n ot be cut off i n the copy. G The zoo m ratio o[...]

  • Seite 97

    5 5.3 Speci fying a Zo om Setting 5-10 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 Specifying a Custom Zoom Ratio ( “ CustomZoo m ” Setting) To en ter a custom z oom ratio 1 Touch [Z oom]. A screen appears, showin g the availa ble Zoom settings. 2 Touch [C ustomZ oom]. 3 Using the keypad , type in th e desired zo om ratio (b etween × 0[...]

  • Seite 98

    5.3 Specify ing a Zoom Setting 5 CF2002/CF3 102 5-11 Specify ing Copy Settings Chapter 5 To re call a stor ed cu stom zoom r ati o 1 Touch [Z oom]. A screen appears, showing th e availab le Zoom set tings. 2 Touch [C ustomZoom ]. 3 Touch [Se t]. 4 Touch [1 ], [2] or [M inimal]. 5 Touch [En ter]. The en tered zoom ra tio is recal led. To specif y di[...]

  • Seite 99

    5 5.4 Sele cting the Paper Setting 5-12 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 5.4 Selecting the P aper Setting The paper used fo r making copies c an be se lected. There are three wa ys of selec ting the p aper. G Auto matic paper selec tion ( “ Auto Paper ” setting ) G Manual paper sel ection G Manual bypass tray selecti on ( “[...]

  • Seite 100

    5.4 Selec tin g the Pa per S etti ng 5 CF2002/CF3 102 5-13 Specify ing Copy Settings Chapter 5 Small-Size d Documents If a docum ent that is too small to be autom aticall y detected is loaded with the Paper setti ng “ Auto Paper ” sel ected, co pies canno t be ma de. However, chang ing the setting of the “ Aut o-select Pape r for Small O rigi[...]

  • Seite 101

    5 5.4 Sele cting the Paper Setting 5-14 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 Auto Paper Sou rce Selection Feat ure If the selected pap er drawer ru ns out of pa per during pr inting and a different pap er drawer is load ed with p aper mee ting the following conditio ns, the othe r paper d raw- er is au tomatica lly sel ected so print[...]

  • Seite 102

    5.5 Selecti ng the O rig > Copy Se ttings (Origi nal Settin gs) 5 CF2002/CF3 102 5-15 Specify ing Copy Settings Chapter 5 5.5 Selecting the O rig > Copy Settings (Original Set- tings) The t ype of ori ginal and the desired t ype of co py can b e specifi ed. In addi tion, the d ocument orientatio n and the positio n of the b inding margi n can[...]

  • Seite 103

    5 5.5 S elect ing t he Ori g > Copy Sett ings ( Origi nal S etting s) 5-16 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 Book se paration ( “ S eparation ” setting of the “ Book ” p arameter) Select th ese setti ngs to mak e a singl e-sided copy of each of the two pages of an open b ook. Book sprea d ( “ Book Spre ad ” setting [...]

  • Seite 104

    5.5 Selecti ng the O rig > Copy Se ttings (Origi nal Settin gs) 5 CF2002/CF3 102 5-17 Specify ing Copy Settings Chapter 5 To sp ecify an Ori ginal setting 1 Touch [O rig Ö Copy]. The Orig inal Ö Copy scr een appea rs. 2 Select th e setting for the typ e of docu ment to be copied. 3 If “ Book ” is selecte d, a scr een showi ng the availa bl[...]

  • Seite 105

    5 5.5 S elect ing t he Ori g > Copy Sett ings ( Origi nal S etting s) 5-18 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 7 If the setti ngs for frame-era sing or cen ter- & frame-erasin g are selected, touch and to s peci fy th e wid th of the area to b e era sed. The w idth of t he area erased with the center-era sing sett ing is no t[...]

  • Seite 106

    5.5 Selecti ng the O rig > Copy Se ttings (Origi nal Settin gs) 5 CF2002/CF3 102 5-19 Specify ing Copy Settings Chapter 5 12 To spec ify a non -stan- dard size, touc h [Ph oto Size or Custom S ize], and t hen specify the size of the d ocumen t. 13 Touch . 14 Touch and to spec ify the le ngth of side X f or the docum ent that is being cop ied (be[...]

  • Seite 107

    5 5.6 Selec ting t he Ori g > Copy Sett ings (C opy S etti ngs) 5-20 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 5.6 Selecting the O rig > Copy Settings (Copy Settings) The type of ori ginal and the desired type of co py can b e specif ied. In add ition, the docum ent orienta tion and t he positi on of the b inding margi n can al so b[...]

  • Seite 108

    5.6 Selec ting t he Ori g > Copy Sett ings (C opy S etti ngs) 5 CF2002/CF3 102 5-21 Specify ing Copy Settings Chapter 5 Copy Settings Single-s ided copy ( “ 1 ” setting) Select t his setti ng to make s ingle-sided copies . Doubl e-sided cop y ( “ 2 ” setting) Select t his setti ng to use the duple x unit to make dou ble-sided copies. Wit[...]

  • Seite 109

    5 5.6 Selec ting t he Ori g > Copy Sett ings (C opy S etti ngs) 5-22 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 Doubl e-sided 4in1 copy ( “ 2-4in1 ” setting ) Select thi s settin g to reduc e eight doc ument pa ges to fit on e double -sided copy page. If the “ 2-4in1 ” setting is sele cted, the s ize of th e original is autom at[...]

  • Seite 110

    5.6 Selec ting t he Ori g > Copy Sett ings (C opy S etti ngs) 5 CF2002/CF3 102 5-23 Specify ing Copy Settings Chapter 5 Booklet -binding ( “ Bo oklet C reation ” setti ng) Sele ct this setti ng to bind copies w ith stapl es and fold t hem along the center. (The copies will be ma de into a booklet.) ✎ Note If less than 4 doc ument pages are[...]

  • Seite 111

    5 5.6 Selec ting t he Ori g > Copy Sett ings (C opy S etti ngs) 5-24 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 To sp ecify a Copy setting 1 Touch [O rig Ö Copy]. The Or iginal Ö Copy s creen appea rs. 2 Sele ct the de sire d Copy setti ng. 3 To sele ct 4in1 c opying o r booklet copying, touch [4i n1/Booklet]. The 4 in1/Booklet screen[...]

  • Seite 112

    5.6 Selec ting t he Ori g > Copy Sett ings (C opy S etti ngs) 5 CF2002/CF3 102 5-25 Specify ing Copy Settings Chapter 5 7 If “ Bind ” is selec ted, [Center Erase] appears . ❍ As a defa ult, “ Center Erase ” is selec ted. 8 If you do not wis h to use center-er asing, tou ch [Center Eras e] to cancel it. 9 Touch [En ter]. The O riginal ?[...]

  • Seite 113

    5 5.7 Selec ting the Orig > C opy Settin gs (Origina l Direction an d Margin Position Set tings) 5-26 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 5.7 Selecting the O rig > Copy Settings (Original Direc- tion and Margin Position Settings) The type of ori ginal and the desired type of co py can b e specif ied. In add ition, the docum en[...]

  • Seite 114

    5.7 Selec ting the Orig > Co py Settings (Or iginal D irection and M argin Po sition Setting s) 5 CF2002/CF3 102 5-27 Specify ing Copy Settings Chapter 5 Selecting t he Document O rientation ( “ Original Directi on ” Setting) The or ientation o f the document can be spec ified. Sele ct the setti ng appropri ate for your do cument or ientati [...]

  • Seite 115

    5 5.7 Selec ting the Orig > C opy Settin gs (Origina l Direction an d Margin Position Set tings) 5-28 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 Specifying the Document B inding Margin Position ( “ Margin ” Setting) If a do cument with a binding margin is b eing copi ed, the pos ition of the binding m ar- gin can be specifie d. Sele[...]

  • Seite 116

    5.7 Selec ting the Orig > Co py Settings (Or iginal D irection and M argin Po sition Setting s) 5 CF2002/CF3 102 5-29 Specify ing Copy Settings Chapter 5 To specif y conditi ons for the origin al As a def ault, no s etting is selected . 1 Touch [O rig Ö Copy]. The Orig inal Ö Copy scr een appea rs. 2 Touch [O riginal Di rec- tion]. Th e Origin[...]

  • Seite 117

    5 5.7 Selec ting the Orig > C opy Settin gs (Origina l Direction an d Margin Position Set tings) 5-30 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 5 Select th e setting appropriate fo r your doc ument, and th en touch [Enter]. ❍ If the po sition of the bi nding marg in for the docum ent is diffe rent from that of the sel ected Ma rgin s[...]

  • Seite 118

    5.8 Selecti ng a Photo /Density Se tting 5 CF2002/CF3 102 5-31 Specify ing Copy Settings Chapter 5 5.8 Selecting a Photo/Density Setting The t ype of ori ginal can be specifi ed. There are twelve document ty pes. G Text combine d with ima ges ( “ Text&P hoto ” setting) G Photograp hs ( “ Photo Imag e ” setting ) G Printed ph otos ( “ [...]

  • Seite 119

    5 5.8 Selec ting a Pho to/Density Setting 5-32 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 Specifying the Image T ype ( “ Photo/De nsity ” Settings) “ Text & Photo ” setting Select this setting when copy ing docu ments co ntaining both text and images. “ Photo Im age ” setting Select t his sett ing when copying docume nts (p[...]

  • Seite 120

    5.8 Selecti ng a Photo /Density Se tting 5 CF2002/CF3 102 5-33 Specify ing Copy Settings Chapter 5 Specif ying the Densi ty Parameters Manual backgrou nd densi ty G One of ei ght densi ty setting s can be sele cted for the d ensity of the backgr ound color of documen ts. G Each tim e [Lighter] or [Darker] i s touche d, the backg round dens ity is l[...]

  • Seite 121

    5 5.8 Selec ting a Pho to/Density Setting 5-34 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 To selec t a Photo/De nsity setting 1 Touch [P hoto/Den sity]. The Photo /Densit y screen appears. 2 Select th e setting for the typ e of docum ent to be copi ed. 3 If [Text] is touch ed, the key f or the “ Dot Matri x Original ” para meter ap- pe[...]

  • Seite 122

    5.8 Selecti ng a Photo /Density Se tting 5 CF2002/CF3 102 5-35 Specify ing Copy Settings Chapter 5 8 Touch [De nsity]. The De nsity screen a ppears. 9 Touch [Li ghter] or [Darker] to s elect the des ired back ground den sity lev el. 10 Touch [Au to]. The auto matic ba ckground density setting is selec ted. 11 Touch [En ter].[...]

  • Seite 123

    5 5.8 Selec ting a Pho to/Density Setting 5-36 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 To selec t a glossy fi nish ( “ Glo ssy Mo de ” setting) 1 Touch [P hoto/Den sity]. The Photo/Dens ity screen a ppears. 2 Touch [G lossy Mo de]. To selec t a Screen Pattern setting If moire patterns ap pears in the copi ed image, c hange the Scree[...]

  • Seite 124

    5.9 Checki ng the Settings 5 CF2002/CF3 102 5-37 Specify ing Copy Settings Chapter 5 5.9 Checking the Settings The Co py mode settings can be c hecked o r changed . There are three scre ens that a llow you to c heck the settings. To ch eck the settings 1 Pres s the [Mo de Chec k] key on the opera tion pane l. 2 The fi rs t scre en show ing t he c u[...]

  • Seite 125

    5 5.9 Ch ecking the Se ttings 5-38 CF 2002/CF3 102 Specify ing Copy Settings Chapter 5 4 Touch [N ext] to displ ay the thi rd screen of s ettings. 5 To chan ge a setti ng: ❍ Touch th e setting that you wi sh to cha nge. The c orresponding screen a p- pears. ❍ Chang e the setting as desired. ✎ Tip The corre sponding sc reens for the “ Scan t[...]

  • Seite 126

    Controlli ng Jobs Chapter 6 6 6 Controlling Jobs[...]

  • Seite 127

    6 6.1 Desc ription o f Jobs 6-2 CF 2002/CF3 102 Controlli ng Jobs Chapter 6 6.1 Descripti on of Jobs Job Any se t of cons ecutive o perations , such as t hose for m aking copi es, scans or com- puter pri ntouts Multi-job featu re G While o ne job is being pri nted, ano ther job c an be que ued. As many as 49 jo bs can be queued. G When one job i s [...]

  • Seite 128

    6.1 Desc ription o f Jobs 6 CF2002/CF3 102 6- 3 Controlli ng Jobs Chapter 6 To change the status o f a queued jo b The sta tus of job s marked as “ Wa iting Print ” can be c hanged. Chang e the stat us accordin g to the pro cedure de scribed b elow. 1 Touch e ither [Job Log] or [Jo b Control] to display the queu ed jobs. 2 Select t he job w hos[...]

  • Seite 129

    6 6.2 Job L og Scree ns 6-4 CF 2002/CF3 102 Controlli ng Jobs Chapter 6 6.2 Job Log Screens The list and deta ils of qu eued jobs can be vie wed. The following f ive Job L og scree ns provid e a variet y of func tions. Print List Scre en The pr ogra mmed de tail s of a pr int job c an be vi ewed. Touch [Jo b Log]. The Print Li st screen appears. Jo[...]

  • Seite 130

    6.2 Job Lo g Screens 6 CF2002/CF3 102 6- 5 Controlli ng Jobs Chapter 6 Scan List S creen The p rogrammed de tails of scan job s can be vi ewed. Touch [Scan List] . The Scan List scre en appear s. Jobs q ueued to b e printed a ppear in or der from th e top of th e list. Touch [Basi c] to d isplay the Basic sc reen agai n. The f ollowing d etails of [...]

  • Seite 131

    6 6.2 Job L og Scree ns 6-6 CF 2002/CF3 102 Controlli ng Jobs Chapter 6 Job List Sc reen The settings of progr ammed jobs can be v iewed. Touch [Jo b List]. Th e Job Lis t screen appears. Jobs t hat have b een programm ed appear in order fro m the top of the list. Howev er, jobs pr ogrammed in user boxe s are not displaye d. Touch [Bas ic] to displ[...]

  • Seite 132

    6.2 Job Lo g Screens 6 CF2002/CF3 102 6- 7 Controlli ng Jobs Chapter 6 Print Log Scree n A log of all print j obs can be v iewed. Touch [Print Log]. T he Print Log screen a ppears. All jobs that hav e been printed are disp layed. In addition, the jobs can be divi ded into se parate lis ts of thos e that hav e finish ed being p rinted and those tha [...]

  • Seite 133

    6 6.2 Job L og Scree ns 6-8 CF 2002/CF3 102 Controlli ng Jobs Chapter 6 11 Job statu s Displays d etails o f any er rors that may have occu rred w hile the job w as bei ng per forme d No. Item Name Desc ription[...]

  • Seite 134

    6.2 Job Lo g Screens 6 CF2002/CF3 102 6- 9 Controlli ng Jobs Chapter 6 Scan Log Sc reen A log of all scan jobs ca n be view ed. Touch [Scan Log]. The Scan L og screen appears. All jobs that have b een scan ned are dis played. In addition , the jobs can b e divide d into se parate lis ts for thos e that hav e finish ed being scanned and those that h[...]

  • Seite 135

    6 6.3 Jo b Con trol Scr eens 6-10 CF 2002/CF3 102 Controlli ng Jobs Chapter 6 6.3 Job Control Scr eens The statu s of a program med job c an be chang ed and the job ca n be prior itized for outpu t. The foll owing six Job Contro l screens p rovide a v ariety of functions. Scanned J ob Screen Scanned jobs sto red in the memory can be pri nted. Touch[...]

  • Seite 136

    6.3 Job C ontrol Scre ens 6 CF2002/CF3 102 6-11 Controlli ng Jobs Chapter 6 To print scann ed data (move it from the list on the Scanne d Job screen to th e Print Lis t screen) 1 Select the job that you wish to prin t from the Scanne d Job scree n. To print mul - tiple jo bs, conti nue selecti ng all jo bs that y ou wish to print. 2 Touch [O K]. Th[...]

  • Seite 137

    6 6.3 Jo b Con trol Scr eens 6-12 CF 2002/CF3 102 Controlli ng Jobs Chapter 6 Unlock Job Screen Jobs loc ked with the “ Locked Job ” functio n can be printed. Touch [U nlock Job ]. The Unlock J ob screen appears. Stored jo bs lock ed with “ Loc ked Job ” function are listed. Locke d jobs appea r in order fro m the top of t he list. The prog[...]

  • Seite 138

    6.3 Job C ontrol Scre ens 6 CF2002/CF3 102 6-13 Controlli ng Jobs Chapter 6 To unlock a job (to print a locked doc ument) 1 Select the job t hat you wish to unlock . To unl ock multip le jobs , continu e select - ing all jobs that you wi sh to unlo ck. 2 Using the keypad , enter the f our-digit u nlockin g code. ❍ For the un locking code, cons ul[...]

  • Seite 139

    6 6.3 Jo b Con trol Scr eens 6-14 CF 2002/CF3 102 Controlli ng Jobs Chapter 6 Increa se Priority Screen Queue d jobs can b e prioritiz ed so tha t they will be printed be fore other j obs. If the job currently bein g printed ca n be interrup ted, printin g is interrupt ed and print- ing of t he prio ritized job b egins. Prin ting of th e interrupte[...]

  • Seite 140

    6.3 Job C ontrol Scre ens 6 CF2002/CF3 102 6-15 Controlli ng Jobs Chapter 6 To incr ease the priority of (print) a job 1 Select th e job that you wi sh to prior itize. 2 Touch [O K]. The job i s move from th e Increase Prio rity list t o the list o f jobs to be prin ted, and the job is queued for printin g. 3 Touch [J ob Log], a nd chec k the stat [...]

  • Seite 141

    6 6.3 Jo b Con trol Scr eens 6-16 CF 2002/CF3 102 Controlli ng Jobs Chapter 6 Combine J obs Screen A stored jo b can be com bined with an other job, an d the two jobs c an be printed as one. Up to five jobs c an be combi ned. If any of the followin g settings are specifi ed for the jobs that are to be combin ed, the setting s for all jobs change to[...]

  • Seite 142

    6.3 Job C ontrol Scre ens 6 CF2002/CF3 102 6-17 Controlli ng Jobs Chapter 6 The f ollowing d etails of the jobs are displaye d. No. Item Nam e Description 1 Job numbe r Jo b iden tifi cati on num ber as sign ed whe n the jo b is pr ogram med 2 Up/do wn arrow s When th ere are more than five jobs , press thes e arro ws to display jobs higher or lo w[...]

  • Seite 143

    6 6.3 Jo b Con trol Scr eens 6-18 CF 2002/CF3 102 Controlli ng Jobs Chapter 6 To co mbine jobs 1 Select th e job tha t you wish to combi ne other jobs with. 2 Select th e jobs th at you wish to combine wit h the first job selecte d. ❍ To com bine mo re than two jobs, repeat t he above step u ntil all jobs that you wish to combine are se lected . [...]

  • Seite 144

    6.3 Job C ontrol Scre ens 6 CF2002/CF3 102 6-19 Controlli ng Jobs Chapter 6 UserB ox Screen Jobs p rogrammed in user box es can be pri nted. ✎ Note The “ User Box ” fun ction is only ava ilable if the hard d isk is ins talled. Touch [UserBo x]. The UserBox scre en appears. Jobs th at have b een programm ed in use r boxes a ppear in or der fro[...]

  • Seite 145

    6 6.3 Jo b Con trol Scr eens 6-20 CF 2002/CF3 102 Controlli ng Jobs Chapter 6 To print a j ob from a user b ox 1 Select th e job tha t you wish to print fro m those progra mmed in us er boxes. 2 If the selecte d job is one stored in the memo ry, touch [Open Jo b]. 3 If the selected job is one tha t has been locked, u se the keypa d to ent er the fo[...]

  • Seite 146

    6.3 Job C ontrol Scre ens 6 CF2002/CF3 102 6-21 Controlli ng Jobs Chapter 6 Memory Recall Screen Past co py jobs c an be recall ed and pri nted agai n. Up to 4 9 past copy jobs are saved. If the n umber of copy j obs exce eds 49 or the memory becom es full, jobs are delet- ed, star ting from t he oldest . Delete d jobs cann ot be reca lled. Touch [[...]

  • Seite 147

    6 6.3 Jo b Con trol Scr eens 6-22 CF 2002/CF3 102 Controlli ng Jobs Chapter 6 ✎ Note If the co pier is tu rned off, al l saved job s are del eted and c an no longer be recalle d. If the “ Co py Trac k Mode ” pa ramet er on the “ Copy Track ” scre en is set to “ Yes ” , the Mem ory Recall j ob control screen can not be dis played. I f [...]

  • Seite 148

    6.3 Job C ontrol Scre ens 6 CF2002/CF3 102 6-23 Controlli ng Jobs Chapter 6 Touch [Basi c] to d isplay the Basic sc reen agai n. The f ollowing d etails of the jobs are displaye d. To recall a job from the mem ory 1 Select th e job that you wish to print from the mem ory. ❍ To recal l more tha n two jobs, repeat the above st ep until a ll jobs th[...]

  • Seite 149

    6 6.3 Jo b Con trol Scr eens 6-24 CF 2002/CF3 102 Controlli ng Jobs Chapter 6[...]

  • Seite 150

    Index Chapte r 7 7 7 Index[...]

  • Seite 151

    7 7.1 I ndex 7-2 CF 2002/CF3 102 Index Chapte r 7 7.1 In dex A Accounts ... ................. ................ ................. ................. ................. .... 2-18 Auto pane l reset ... ................. ................. ................ ................. .......... 1-16 Auto pa per so urce se lecti on ............ ................. ...[...]

  • Seite 152

    7.1 Index 7 CF2002/CF3 102 7- 3 Index Chapte r 7 Copy 1 set ..................... ................. ................. ................. ................. 2-16 Copy se tti ngs ....................... ................. ................. ................. ........... 5-20 Copy track ................ ................. ................ .................[...]

  • Seite 153

    7 7.1 I ndex 7-4 CF 2002/CF3 102 Index Chapte r 7 J Job C ontrol sc reens ........ ................. ................. ................. ............... 6-1 0 Job Li st scre en ...................... ................. ................ ................. ............ 6-6 Jobs ........................... ................ ................. ............[...]

  • Seite 154

    7.1 Index 7 CF2002/CF3 102 7- 5 Index Chapte r 7 Phot o Imag e set ting ....... ................. ................. ................. ......... 1-9 , 5-32 Photo/D ensity setting ..... ................. ................. ................. .................5-31 Postcard ........ ................ ................. ................. ................. .[...]

  • Seite 155

    7 7.1 I ndex 7-6 CF 2002/CF3 102 Index Chapte r 7 T Test copies ..... ................. ................. ................. ................. ............... 2-1 6 Text & Pho to setting ... ................ ................. ................. ..............1-9 , 5-32 Text setting .... ................. ................. ................. ......[...]

  • Seite 156

    2003. 01 4025770604 Copyright 2002 MINOLTA CO., LTD. MINOLTA CO., LTD. 3-13, 2-chome, Azuchi-Machi, Chuo-ku, Osaka. 541-8556, Japan The information contained in this manual is subject to change without notice to incorporate improvements made on the product or products the manual covers.[...]