Miele K-9552 ID Bedienungsanleitung

Operating and installation instructions Refrigerator with Dynamic cooling K 9552 iD (-1) K 9752 iD (-1) To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. M.-Nr. 07 470 031 en - GB, HK[...]

Guide to the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 How to save en[...]

After Sales / Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

a Safety lock indicator light b On/Off button c Refrigerator temperature display d Temperature selector buttons (+ for warmer; – for colder) e Super cool button and indicator light f Dynamic cooling button and indicator light Guide to the appliance 4[...]

a Dynamic cooling fan b Bottle rack* c Adjustable shelves d Condensate channel and drain hole e Fruit and vegetable containers * f Butter and cheese compartment g Egg tray/Condiment tray h Interior lighting i Universal container* j Bottle shelf k Bottle divider* * Depending on model Guide to the appliance 5[...]

Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and can normally be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation! Rather than just thro[...]

This appliance complies with all relevant legal safety requirements. Improper use of the appliance can, however, present a risk of both personal injury and material damage. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before installation and before using it for the first time. They contain imp[...]

Technical safety ~ Before setting up the appliance, check it for any externally visible damage. Do not install and use a damaged appliance. ~ This appliance contains the coolant Isobutane (R600a), a natural gas which is environmentally friendly. Although it is flammable, it does not damage the ozone layer and does not increase the greenhouse effect[...]

~ Safe operation of the appliance is only assured if it has been installed and connected in accordance with these operating and installation instructions. ~ This equipment may only be used in mobile installations such as ships, caravans, aircraft etc. if a risk assessment of the installation has been carried out by a suitably qualified engineer. ~ [...]

~ Do not use sharp edged objects to – remove frost and ice, – separate food which has become frozen. They will damage the evaporator, causing irreversible damage to the appliance. ~ Do not use defrosting sprays or de-icers, as they might contain substances which could damage the plastic parts or which could cause a build-up of gases and pose a [...]

Normal energy consumption Increased energy consumption Installation site In a ventilated room. In an enclosed, unventilated room. Protected from direct sunlight. In direct sunlight. Not situated near to a heat source (radiator, oven). Situated near to a heat source (radiator, oven). Where the ideal ambient room temperature is approx. 20°C. Where t[...]

Before using for the first time The stainless steel trim to the interior shelves and the door shelves has a layer of protective foil to prevent scratching during transportation. ^ Do not remove this foil until the appliance has been built in. ^ Treat the stainless steel surfaces with a proprietary stainless steel conditioner immediately after remov[...]

Activating or de-activating the safety lock ^ Press and hold the Super cool button pressed in for approx. 5 seconds. The Super cool indicator light flashes, and a ; flashes in the temperature display. ^ Press the Super cool button again. ; will light up in the display. ^ You can now choose between ; 0 and ; 1 by pressing the temperature selector bu[...]

It is very important to set the correct temperature for storing food in the appliance. Micro-organisms will cause food which is not stored at the correct temperature to deteriorate rapidly. Temperature influences the growth rate of these micro-organisms. Reducing the temperature reduces their growth rate. The temperature in the appliance will rise:[...]

If you have adjusted the temperature, wait for approx. 6 hours if the appliance is not very full and for approx. 24 hours if the appliance is full , before checking the temperature display, as it will take this long for the display to give an accurate reading. If, after this time, the temperature is still too high or too low, you will need to adjus[...]

^ Press the Super cool button to save the setting. ^ Press the On/Off button to come out of setting mode. If you do not do this, the electronics will switch over to normal operation automatically after a couple of minutes. The correct temperature 16[...]

Super cool The Super cool function can be used to rapidly reduce the temperature in the refrigerator section to its lowest setting (depending on the room temperature). Switching on Super cool Super cool is particularly recommended for faster chilling of large amounts of fresh food or drink. ^ Press the Super cool button. The Super cool indicator li[...]

Switching off Dynamic cooling ^ Press the Dynamic cooling button m . The Dynamic cooling indicator light will go out. The fan automatically switches off when the door is open. Super cool and Dynamic cooling 18[...]

Different storage zones Due to the natural circulation of the air in the appliance, there are different temperature zones in the refrigerator. Cold, heavy air sinks to the lowest section of the appliance. Make use of the different zones when placing food in the appliance. This appliance has Dynamic cooling, which helps to keep an even temperature w[...]

Food which should not be stored in a refrigerator Not all food is suitable for refrigeration, as some food is sensitive to cold. Cucumbers, for example, become glassy, aubergines bitter and potatoes sweet. Tomatoes and oranges lose their aroma, and the peel on citrus fruit hardens. Food which should not be stored in a refrigerator includes: – pin[...]

– Examples of fruit and vegetables which react strongly to the natural gases given off by other types of fruit and vegetables are: Kiwis, broccoli, cauliflower, brussels sprouts, mangos, honeydew melons, apples, apricots, cucumbers, tomatoes, pears, nectarines and peaches. Example : Broccoli should not be stored with apples, as apples produce a l[...]

Moving the shelves The shelves can be adjusted according to the height of the food. ^ Raise the shelf, pull it forwards slightly until the notch at the side is in line with the shelf support. It can then be raised or lowered to the required level. The raised edge at the back must face upwards to prevent food from touching the back of the appliance [...]

Fruit and vegetable containers on telescopic runners (depending on model) The fruit and vegetable containers are pushed in and out on telescopic runners, and can be completely removed if necessary. ^ Pull the container right out and then lift it up and off. Push the runners back in again to avoid injury or damage. To replace a container, ^ place it[...]

Universal container (depending on model) The universal container can be used both to store and serve food. It consists of a deep tray a and a shallow tray b . Both trays fit the stainless steel frame. If you wish to use the universal container to serve food, ^ place the shallow tray b in the stainless steel frame, and use the deep tray as a lid a .[...]

The refrigerator defrosts automatically. Condensate and frost can build up on the back wall of the refrigerator whilst it is in use. You do not need to remove this, as it will defrost and evaporate automatically with the warmth generated by the appliance. The condensate is drained away via a channel and drain hole into an evaporation system at the [...]

Never use cleaning agents containing abrasive substances such as sand, soda, acids, chlorides or chemical solvents. "Non-abrasive" cleaning agents are also unsuitable as they can cause matt areas to appear. To help prevent re-soiling, treat stainless steel surfaces with a proprietary conditioning agent for stainless steel (available from [...]

^ Clean stainless steel surfaces with a suitable non-abrasive stainless steel cleaning agent following the manufacturer’s instructions on the packaging. ^ To help prevent re-soiling, a conditioning agent for stainless steel should always be used after cleaning. Follow the manufacturer’s instructions on the label. Ventilation gaps ^ The ventilat[...]

Repairs to electrical appliances should only be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Ensure that current is not supplied to the a[...]

. . . the interior lighting is not working. Has the refrigerator door been left open for too long? The lighting switches itself off automatically after approx. 15 minutes. If it also does not come on when the door is opened briefly, but the temperature display is working, then the light is defective. ^ Call the Service Department. The LED lighting [...]

Normal noises What causes them Brrrrr... Humming noise made by the motor (compressor). This noise can get louder for brief periods when the motor is switching on. Blubb, blubb.... A gurgling noise can be heard when coolant is circulating through the pipes. Click.... Clicking sounds are made when the thermostat switches the motor on and off. Sssrrrr[...]

In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee, please contact: – your Miele Dealer or – Miele (see back cover for contact details). When contacting your Dealer or Miele, please quote the model and serial number of your appliance. This information is given on the data plate inside your applianc[...]

Electrical connection U.K. All electrical work should be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations (BS 7671 in the UK). The appliance is supplied with a mains cable and moulded plug ready for connection to an a.c. single phase 220-240 V 50 Hz supply. Please ensur[...]

This appliance must be built in, otherwise it could tip up. Location This appliance should be installed in a dry, well-ventilated room. It should not be installed where it is exposed to direct sunlight or directly adjacent to a heat-producing appliance such as an oven or a radiator. The room temperature should not go above or below the climate rang[...]

Before installation ^ Before installation remove the cover strip, sealing strip and other accessories from inside the appliance and from the external rear wall of the appliance. ^ Do not remove the following from the back of the appliance: – The spacers. These ensure the gap required between the back of the appliance and the wall is maintained. ?[...]

Stainless steel front (depending on model) If the old appliance had a different type of hinging, or if you cannot or do not wish to reuse the old furniture door a stainless steel front can be fitted instead. This is available from your dealer or the Miele Spare Parts Department. Installation 35[...]

Niche height (mm) A K 9552 iD (-1) 1397 - 1413 K 9752 iD (-1) 1772 - 1788 Building-in dimensions 36[...]

The door hinges are set ex-works to enable the door to be opened wide. However, if the opening angle of the door needs to be limited for any reason, the hinge can be adjusted to accommodate this. – For example, if the appliance door hits an adjacent wall when opened, the opening angle can be limited to 90°. ^ Place the locking pins supplied for [...]

Before building the appliance in, you will need to decide on which side the door is to be hinged. If left hand door hinging is required, follow the instructions below. To change the door hinging you will need the following tools : – a cross-slotted screwdriver, – a screwdriver, – a selection of Torx screwdrivers, – a spanner. Appliance door[...]

^ Unscrew mounting b and pull soft-close mechanism c downwards to remove it. ^ Undo ball joint d using a spanner and remove it. ^ Stand the appliance door up, and loosen the hinges at the front (the hinges remain open). ^ Remove screws a , and use the stoppers supplied c to plug the empty holes. Do not close up the hinges. Danger of inury. ^ Replac[...]

^ Push the appliance door onto the pre-fitted screws, and then tighten the screws. ^ Replace covers a , b and c . ^ Replace the locking pins into the top of the hinges to prevent the doors opening too far. Changing the door hinging 40[...]

All fitting instructions given are for a right hand hinged appliance. If you have converted the appliance to left hand hinging you will need to adapt these instructions accordingly. To install the appliance you will need the following : – a cross-slotted screwdriver, – a selection of Torx screwdrivers, – a hexagon spanner. Weight of the furni[...]

Preparing the appliance ^ Slide cover strip a into the holder in the middle of the appliance as illustrated with the bumps facing downwards. The bumps will fit into the keyhole slots. ^ Position the mains electricity cable so that the appliance can be connected easily once installed. ^ Push the appliance two-thirds of the way into its niche. When d[...]

^ Fit cover g onto fixing bracket h . ^ Secure fixing bracket h to the bottom of the appliance with screws i (M5 x 15). ^ Carefully remove the protective foil from sealing strip j . ^ Apply the sealing strip to the side of the appliance on which the door is opened so that it is flush with the front edge of the appliance. Fit the sealing strip so th[...]

On furniture with door fittings (e.g. stubs, seals etc) the dimension of these must be taken into account when making sure there is a gap all round of 42 mm . ^ Pull the appliance forwards by the dimension of the door fitting to keep the gap at 42 mm all round. The hinges and the covers will now protrude by the dimension of the door fitting. Tip: R[...]

^ Loosen screws b on the top and bottom fixing brackets c . ^ Press fixing bracket c against the side wall and tighten screws b . ^ Attach fixing bracket c to the housing unit side wall with screws d . Drill holes in the housing unit side walls if necessary. ^ Break off the protruding end of top cover e , turn the cover around and fit it on top fix[...]

^ Using a pencil, lightly mark a line down the centre of the inside of the furniture door. ^ Hang fixing bracket d with the fitting aids onto the inside of the furniture door. Align the fixing bracket centrally. ^ Attach the fixing bracket securely using at least 6 short chipboard screws e (4 x 14 mm). (On cassette doors only use 4 screws on the ed[...]

Securing the appliance door to the furniture door: ^ Screw fixing bracket a into the pre-drilled holes in the appliance door using hexagonal screw b . Make sure the two metal edges c are aligned (Symbol II ). ^ Drill fixing holes d in the furniture door, and screw i n4x1 4m m screws e . (On large or divided doors, attach a second pair of fixing bra[...]

^ Replace all the covers. To make sure the appliance is correctly fitted: – The door must close properly. – The door must not touch the furniture carcase. – The seal at the top edge of the handle side must fit properly. To double check place a torch in the appliance and close the doors. Turn the lights out in the room. If you can see any ligh[...]

49[...]

50[...]

51[...]

Alteration rights reserved / 1310 K 9552 iD (-1), K 9752 iD (-1) M.-Nr. 07 470 031 / 03[...]