Memorex MPH7895 Bedienungsanleitung

MPH7895 Congratulations on your selection of the MPH7895 from Memorex ® . This quality 2.4GHz cordless telephone all Digital Answering System with Call W aiting Caller ID, like all Memorex ® products, has been designed to give you many years of continuous service and represents the best value for your money. It requires little maintenance and is [...]

IMPORT ANT SERVICE INFORMA TION 1 THIS SYMBOL IS INTENDED TO ALERT THE USER OF THE PRESENCE OF IMPORT ANT OPERA TING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE OWNER'S MANUAL. Read this manual before attempting to setup or use this instrument. It contains important information regarding safe installation and use. Keep this manual for futu[...]

HANDSET BASE UNIT RECHARGEABLE Ni-Cd BA TTERY P ACK ADAPTER (AC9V, 500mA) W ALL MOUNT BRACKET BEL T CLIP CARTON CONTENTS USER’S MANUAL THLEPHONE LINE CORD (Short & Long) MPH7895 2 MPH7895/04281A(English).put 7/5/01, 4:07 PM Page 3 Adobe PageMaker 6.5C/PPC[...]

3 SA VE THESE INSTRUCTIONS IMPORT ANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be fol- lowed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unp[...]

4 SA VE THESE INSTRUCTIONS BA TTER Y SAFETY INSTRUCTIONS CAUTION: T o reduce the risk of fire or injury to persons, read and follow these instructions: 1. Use only the following type and size of handset battery pack: Cordless T elephone Battery Pack DC3.6V, 800mAh, Ni-Cd Battery Pack 2. Do not dispose of the battery in a fire. The cell may explode.[...]

5 FCC NOTICE The FCC requires that you be advised of certain requirements involving the use of this telephone. 1. This telephone is Hearing Aid Compatible. 2. This equipment complies with Part 68 of the FCC rules. On the bottom of this equipment is a label that contains, among other information, the FCC registration number and Ringer Equivalence Nu[...]

T ABLE OF CONTENTS IMPORT ANT SER VICE INFORMA TION.............................................................................1 CARTON CONTENTS.........................................................................................................2 IMPORT ANT SAFETY INSTRUCTIONS....................................................................[...]

7 HANDSET CONTROLS - Cordless T elephone 1. LCD Display: Shows the phone status, Caller ID Call Record information and function menus. 2. T ALK Button: Press to answer an incoming call or to place a call. Press to end a call. 3. MEMO (Memory) Button: Used for storing / retrieving phone numbers to / from the 20 Memory Dialing Directory. 4. TONE ( * [...]

8 (Figure 2) 3. REC OGM Button: Press to record Outgoing Message (OGM). 4. PLA Y BUTTON: Press to playback Incoming Message(s) (ICM) or T wo-W ay Recording(s). 5. PREV Button: Press to skip to the previous message during playback. 6. STOP Button: Press to stop current activity . 7. ERASE Button: Press to erase message. 8. REMOTE Button: Allows you [...]

BASE UNIT CONTROLS 1. 9V AC Adapter Jack: A jack located on the rear side of the base unit used for connect- ing the adapter to the base unit. 2. TEL LINE Jack: Accepts line cord to make connection with modular type telephone outlet. 3. VOLUME Control: Adjusts the base unit speaker volume level. 4. RINGS (TS / 6 / 2) Switch: Selects the number of r[...]

16 . MEMO LED Indicator: Lights up to indicate the presence of Memo message and blinks if there are new Memo message(s). 17. MSG LED Indicator: Lights up to indicate the presence of Incoming Message (ICM) and T wo-Way Recordings. Blinks if there are new Incoming Message(s) (ICM) or T wo- W ay Recording(s). 18. CHG (Charge) / IN USE LED Indicator: L[...]

íúóáéÚÍÓÁ 11 B. W ALL MOUNTING (No Standard W all Jack) 1. Drill two holes with a vertical distance between the two marked positions of 3 15/16 " (100 mm) as shown in Figure 6. 2. Drive a screw into each of the holes. T ighten them to the end of the screw line, only leaving the smooth part of the screw head outside the wall. 3. Hang t[...]

12 HANDSET BA TTER Y INST ALLA TION CAUTION: Use only the Nickel Cadmium (Ni-Cd) battery type included with this unit. Use of other battery types may cause injuries or damage. 1. Remove the battery compartment cover of the handset. Connect the rechargeable Ni-Cd battery as shown in Figure 10. Line Cord T elephone Modular Jack AC Outlet 9V AC Adapte[...]

13 7. After two beeps, press 1 for AM, or press 2 for PM. The unit will announce the new day and time followed by a long beep and will prompt "Please enter next command." 8. Press the REMOTE button to exit the remote mode. Otherwise, the remote function will turn off automatically if not in use for 8 seconds. TONE / PULSE SETTING Select t[...]

(Figure 15) 14 B. IF THE HANDSET IS OUT OF THE BASE UNIT 1. When the phone rings, press the T ALK button on the handset. 2. Start your conversation. 3. When finished with your call, either press the T ALK button or place the handset on the base unit. LAST NUMBER REDIAL A. AFTER HEARING A BUSY TONE WHEN PLACING A CALL 1. If you get a busy tone, pres[...]

15 (Space) Press button two times 1 Press 1 four times 5. Press handset MEMO button to store the name field. The cursor or marker moves to the telephone number line entry. 6. Enter the telephone number you want to store. Y ou can enter up to 24 digits. If you make a mistake, press button to delete the character on the left of the cursor. 7. Press h[...]

4. Follow steps 4-7 as described in the section Storing T elephone Numbers Into Memory to overwrite the selected entry. MIXED MODE DIALING (T emporary Pulse to T one Dialing) 1. If you only have pulse (rotary dialing) service in your area and want to access T one services (Bank by Phone, etc.), ensure that the T / P (T one / Pulse) switch is set to[...]

ANSWERING MACHINE OPERA TION The unit features a sophisticated Digital Answering System. Incoming Messages (ICMs), Outgoing Message (OGM) and Memo messages are stored electronically into digital memory . Messages are accessed instantly and arranged compactly in this memory . The unit can store 15 minutes of messages (ICMs, OGM and Memos combined). [...]

(Figure 24) 2. Press REC OGM button. The unit will prompt "Please record your announcement after the beep. T o stop, press star(*)." 3. After hearing a long beep, begin your announcement. 4. Press star (*) to stop recording and the MPH7895 will playback once automatically for your review. 5. Press REMOTE button to exit the remote mode. Ot[...]

B. ERASING ALL ICM AND TWO-W A Y RECORDINGS 1. In standby mode, press and hold the ERASE button for about 2 seconds. 2. The unit will announce "Message (number) erased. Y ou have no message." C. ERASING ALL MEMO MESSAGES 1. In standby mode, press the ERASE button briefly for less than 2 seconds and press and hold MEMO button for about 2 s[...]

NOTE: If memory is full, the unit will announce " Memory full ." and T wo-W ay recording is not possible. Y ou can erase any or all the messages remotely after listening to them. Refer to the REMOTE OPERA TION section for more details. Recording two-way conversations may be subjected to Local State and Federal laws and regulations VOX (VO[...]

# Set Answer Mode to OFF During playback, you can press the following keys: 7 Playback Previous Message 8 Repeat a Message 9 Skip Forward to the Next Message 0 Erase a Message * Stop Function B. STOP FUNCTION Press * * * * * to abort the current function. C. CHANGING THE P ASSWORD 1. Press the 1 key . The unit will prompt "(current code). Ente[...]

RECEIVING NEW CALL When you receive a new call, the call information is stored under CALLER ID Call Record. In standby mode, you can find how many calls and new calls you have. The "NEW" segment of LCD Display and NEW CALL LED indicator will flash if there is new call(s). When you receive a call, the system displays the caller information[...]

SA VING CALL RECORDS Y our phone stores up to 40 Call Records before the memory becomes full. When the next call comes in, the oldest record drops off and makes room for the new Call Record. T o save specific calls, delete old and unnecessary Call Records to keep from filling your phone's memory. DELETING CALL RECORDS A. DELETING SINGLE CALL R[...]

2. Find the desired Call Record to dial. 3. Press and hold C. BACK button for about 2 seconds. The unit will dial as shown on the table below. 18174567890 NAME LCD Display Number of Digits Called Back 7 digits 1 + user's area code + 7 digits If the user's area code is not set, 7 digits will be called back. 10 digits 1 + 10 digits 1 1 digi[...]

1. Press SCAN/PRG button. 2. Press 4 button, or press(+) button four times. The Callback Number is displayed. 3. Press or button to change the Callback Number . The Callback number scrolls as 10 07 10. 4. Press SCAN / PRG button to save and exit. F . HOW TO SET RINGER ON / OFF 1. In standby mode, press SCAN / PRG button. 2. Press 5 button, or press[...]

ALL CALLS and NEW CALLS This message lets you know how many call records and new call records you have. DELETED! This confirms that the call record or records were deleted. EMPTY When creating speed dialing entries, this message indicates an available memory location. DA T A ERROR The message sent is incomplete. This message usually indicates tempo[...]

IMPROVING CORDLESS RECEPTION Follow these guidelines to improve cordless sound quality: • • • • • Select an area to install the unit where it is closest to the center of your home or of fice. This will improve the operating range of the unit. • • • • • Keep the unit base unit away from electrical equipment. Radio Frequency Inter[...]

TROUBLESHOOTING SYMPTOMS POSSIBLE SOLUTION / CAUSE No dial tone • • • • • Check that the telephone line cord connectors at both ends are pushed in firmly until they click. • • • • • If you had a power failure or had unplugged the base unit, replace the handset on the base unit for two to five seconds to reset the system. Does no[...]

29 • • • • • Check the telephone line cord connections. • • • • • Check the batteries for proper installation. The Caller ID panel is blank The Caller ID does not show the caller's name and / or phone number. • • • • • The Caller ID unit will not function until you have Caller ID service provided by your local pho[...]

TECHNICAL INFORMA TION This cordless phone uses radio frequencies to allow mobility . There are certain difficulties in using radio frequencies with a cordless telephone. While these are normal, the following could affect the operation of your system. NOISE: Electric pulse noise is present in most homes at one time or another . This noise is most i[...]

Distributed Exclusively by Memorex ® . MPH7895 / 04281A-1 www.memcorpinc.com 31 MPH7895/04281A(English).put 7/5/01, 4:08 PM Page 32 Adobe PageMaker 6.5C/PPC[...]