McIntosh UR12 Bedienungsanleitung

McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New Y ork 13903-2699 Phone: 607-723-3512 F AX: 607-724-0549 Owner s Manual UR12 UR12 T ouch Screen Remote[...]

2 IMPOR T ANT SAFETY INSTRUCTIONS! PLEASE READ THEM BEFORE OPERA TING THIS EQUIPMENT . W ARNING - TO REDUCE RISK OF DAMAGE, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. NO USER-SER VICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. General: 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all[...]

3 Customer Service T echnical Assist ance Please T ake A Moment Thank Y ou The serial number, purchase date and dealer name are important for possible in- surance claim or future service. The spaces below have been provided to record that information: Note: The Serial Number is located inside the Battery Compartment on the left side. Thank you for [...]

4 T able of Content s Safety Instructions ................................ 2 Thank Y ou, Please T ake a Moment, T echnical Assistance and Customer Service .................................. 3 T able of Contents and General Notes ... 4 Introduction .......................................... 5 Performance Features ........................... 5 Instal[...]

5 Performance Features Introduction The McIntosh UR12 is a very powerful and flexible learning remote control with a LCD T ouch Screen. The UR12 has many advanced operating features that can add convenience and enjoyment of your home entertainment system. It is designed to op- erate up to twelve components. The UR12 is preprogrammed for most McInto[...]

6 Inst alling Batteries Figure 3 Figure 4 The UR12 uses four A A batteries. Please be sure to match the batteries with the (+) and (-) markings inside the battery com- partment during installation. Refer to fig- ures 1, 2, 3 and 4 Note: Please do not mix old batteries with new ones or mix different types of batteries. Installing Batteries Figure 1 [...]

7 The remote control goes through self-test- ing for three seconds after the batteries are installed and automatically switches to Setting Mode for programming. Refer to fi gur es 5 & 6. 1. Exit the System Setting Mode by sim- ply pressing the MAIN push-button. Initial St art-up Initial St art-up 2. T o start controlling McIntosh Compo- nents, [...]

8 Adjusts the VOLume level Up T urns Power ON or OFF Selects T ransport Functions of a DVD/CD player , DVD/CD changer or tape recorder T ouch Screen and Push-buttons Adjusts the VOLume level Down Selects the Main T ouch Screen Menu Selects the dif ferent Pages of T ouch Screen Menus MUTEs the audio T ouch Screen with Pages of Menus IR Sensor for se[...]

9 T ouch Scr een The T ouch Screen allows for the selection and controlling of different components through multiple On-Screen Pages. Mute Press the MUTE Push-button to mute the audio and a second time to unmute. The MUTE Push-button is also used in conjuction with other push-buttons to per- form programing and other functions. T ransport Functions[...]

10 Input Source Selection Select one of the six Audio Inputs or six Audio/V ideo Inputs from the available In- put Sources on your McIntosh Control Center or Preamplifier . Note: If your McIntosh Contr ol Center or Pr eamplifier has additional Inputs that you would like to select and control, contact your McIntosh Dealer for assistance. T ouch Scre[...]

11 MAC T ouch Screen Pages T ouch Screen Menu Page 2 T uner Functions Select AM or FM broadcast band. Press and release SEEK Up or Down to move from station to station. Press and hold a SEEK Push-button to move continuously from station to station. Press REVIEW to start the automatic brief audition of each of the presets stored in the tuner memory [...]

12 T ouch Screen Menu Page 3 Numbered and +10 Push-buttons Press push-buttons 0 through 9 to access tuner station presets, DVD chapters, DVD/ CD tracks or DVD/CD discs. When using a McIntosh DVD/CD player, access track numbers higher than 10 by first pressing +10 and then a number push-button. Home Allows remote operation of the McIntosh HC-1 Home [...]

13 Power On and Off Switches AC Power ON or OFF . Note: Pr ovides discr ete commands for use in Macros. Listen and Record Processors Accesses the external LISTEN and/or RECORD PROCESSOR(s) on some McIntosh Control Centers or Preamplifi- ers. Speakers 1 and 2 Switches the two pairs of SPEAKERS/ OUTPUTS On or Off. Mode Changes the Sound Processing Mo[...]

14 T ouch Screen Contrast All the programming is done by first enter- ing the SYSTEM SETTING Mode in the remote control. Press both the MAIN and P AGE buttons simultaneously for five sec- onds to enter the SYSTEM SETTING mode. Refer to figure 7. Move the cursor on the screen with the joystick to your se- lection in the list. Enter the selection by [...]

15 System Settings the setting mode by simply pressing the MAIN button or bring the cursor to 8. TO EXIT with the joystick and push the joy- stick down. Enter the Clock Setting Mode by moving the cursor on the TOUCH SCREEN to 6. SET DA TE & CLOCK by using the joy- stick. Enter this mode by pushing the joy- stick down. Press the selection you wi[...]

16 The MACRO and PUNCH THROUGH can be programmed. There are three types of macro functions you can program. The M1, M2 and M3 in the Main Menu are de- signed to send out up to twenty eight com- mands from each of the three T ouch-but- tons. There are T welve Device T ouch-but- tons in the Main Menu and fourteen avail- able commands from each device[...]

17 System Settings Device Buttons 1. Select one of the twelve Device But- tons you wish to store macro functions with the cursor on DEVICE BUTTON. 2. Move the cursor to COMMON BUT - TON and select again either the same or another device button whose func- tional buttons you wish to store in the device Macro T ouch-button you se- lected first. Y ou [...]

18 CHANNEL up button for Channel Punch Through. 3. Select the device you wish to Punch- through to (1st device). 4. Select the device you wish to Punch- through from (2nd device). 5. Repeat from Step 2 to program Punch- through to other devices. Once you complete the Punch-through Program- ming and wish to exit, press both the MAIN and P AGE button[...]

19 System Settings ming. If there is more than one code number assigned to your brand, try one code number at a time until you find the right code number . If you entered the right code number , the component will turn off right after you entered the number . When the right code number is entered, save the code by pressing the SA VE button on T ouc[...]

20 button will only show the first brand (in alphabetical order) in that alphabet group. 9. If the first code number assigned to the brand is the right one, it will turn off the component. If it is not the right one or if it is not the right brand name, press the Channel Up button. It will automatically send out a POWER OFF command either from the [...]

21 and select the device on the T ouch- button that you wish to teach into. 4. Place your original remote control to the UR12 head to head about 2-3 inches apart. Refer to figure 14. 5. Press either the Device T ouch-button or functional button, whichever you wish to teach in the UR12. It is now ready to learn on the button you se- lected. 6. Press[...]

22 in the Device T ouch-button, move the cursor to DEVICE BUTT ON. 4. Press the functional button or Device T ouch-button you wish to erase for three seconds or more and it will flash ERASED. Repeat this step for other buttons you wish to erase. 5. Once you completed erasing and wish to exit from this mode, press the MAIN button to go back to[...]

23 System Settings Edit T ouch-buttons T ouch-buttons may be added or deleted, change the T ouch-button size and shape, move the T ouch-button locations (even to other pages), creating a Favorite Device Page and edit the T ext on the T ouch-but- tons in the EDITING Mode. 1. Go into System Setting Mode by pressing both the MAIN and P AGE buttons sim[...]

24 buttons on the Favorite Device Page can be moved. Copy T ouch Buttons 1. Move the cursor either to COMMON BUTTON or DEVICE BUTTON with the MUTE button. 2. Select the device you wish to enter . 3. Select the functional button you wish to copy and move it with the joystick within the same page or move to the next page by pressing the P AGE but- to[...]

25 memory in the remote control and a new program is loaded to the remote control. The learned functions will be lost permanently with the deletion of the button. Please use caution in deleting the button. 2. Repeat the above step to continue to delete other buttons in the same de- vice. 3. If you wish to delete functional buttons in another device[...]

26 8. Once the operation is completed and you wish to exit from this mode, return to the main menu by pressing the MAIN button and exit from the main menu by pressing both the MAIN and P AGE buttons simultaneously . Changing T ouch-buttons 1. Press CHANGE button in EDITING MODE. 2. If you wish to change the functional buttons, press the device that[...]

27 Figure 18 or DOWN Push-button to select the characters you wish to use, press the Channel UP or Channel DOWN Push- button to move on to next or move back to the previous characters, press the PRE CH button to move to the sec- ond line of the text and the POWER button for different font sizes. Y ou can select font sizes by pressing the POWER butt[...]

28 Program Loading Setting the Date and Clock Figure 19 1. Enter the Setting mode by pressing both the MAIN and P AGE Push-but- tons simultaneously for five seconds. 2. Move the cursor on the T ouch Screen to 6. SET DA TE & CLOCK by using the joystick. Enter this mode by push- ing the joystick down. Refer to figure 19. 3. Press the selection yo[...]

29 Caution: The following step will erase all of the Normal Modes of Operations from the UR12 and activate the Program Upload Mode. Pressing the button shown through the opening in the battery compartment after removing the batteries from the UR12 will erase all the programs in the remote con- trol. Refer to figure 22. In order to return the UR12 t[...]

30 The Function of some T ouch- buttons and Push-buttons, when used to control various de- vices, differ from the Button Nomenclature. When CABLE T ouch Screen Menu is selected: A = P/Delete (T ouch Screen Page 3) When CD T ouch Screen Menu is selected: CH Up  = Next Track CH Down  = Previous Track K1 = Search - (T ouch Screen Page 3) K2 = Ra[...]

31 When SA T T ouch Screen Menu is selected: INPUT = TV/SA T (T ouch Screen Page 1) EXIT = Exit/Cancel (T ouch Screen Page 2) When T APE T ouch Screen Menu is selected: PRE. CH = Deck A DECK A-R PLA Y = Rev . Play (T ouch Screen Page 1) DECK B-R PLA Y = Rev . Play (T ouch Screen Page 2) DECK B-PLA Y = For . Play (T ouch Screen Page 2) K10 = Deck A [...]

32 ADC ------------------------------------------------- 7 ADCOM -------------------------------------------- 082 092 225 161 269 AIW A ----------------------------------------------- 018 104 170 202 203 213 21 1 188 AKAI ----------------------------------------------- 138 189 AMC ------------------------------------------------ 125 126 127 128 258[...]

33 MERIDIAN ---------------------------------------- 100 012 013 MITSUBISHI -------------------------------------- 242 243 204 MONDIAL ----------------------------------------- 157 158 042 043 081 112 MYRY AD ------------------------------------------ 276 NAD ------------------------------------------------ 186 1 13 283 NAKAMI CHI -----------------[...]

34 LUTRON ------------------------------------------- 077 158 159 MAKIT A ------------------------------------------- 186 201 MINDP A TH ---------------------------------------- 205 NILES ---------------------------------------------- 160 187 NSM ------------------------------------------------ 161 PIANO DISC PLUS ------------------------------ 85 [...]

35 Setup Code T able P ARAGON ----------------------------------------- 52 PHILIP S -------------------------------------------- 006 012 013 020 085 095 PIONEER ------------------------------------------ 103 034 051 063 076 105 PRUCER ------------------------------------------- 59 PTS -------------------------------------------------- 011 071 074 P[...]

36 Manufacturer/Brand Set-Up Code Number CD Devices HIT ACHI ------------------------------------------- 042 175 INKEL ---------------------------------------------- 130 143 144 JC PENNY ----------------------------------------- 014 061 092 141 JENSEN -------------------------------------------- 1 58 JVC --------------------------------------------[...]

37 Setup Code T able TECHWOOD -------------------------------------- 76 THET A DIGITA L --------------------------------- 234 235 TOSHIBA ------------------------------------------ 006 067 091 160 148 VECTOR RESEARCH -------------------------- 80 VICTO R -------------------------------------------- 004 022 114 124 W ARDS ---------------------------[...]

38 Manufacturer/Brand Set-Up Code Number L V Devices Manufacturer/Brand Set-Up Code Number SA T Devices ALPHAST AR ------------------------------------- 123 AMPLICA ----------------------------------------- 50 BIRDVIEW ---------------------------------------- 129 1 13 051 126 BSR ------------------------------------------------- 53 CAPETRONICS ----[...]

39 Setup Code T able Manufacturer/Brand Set-Up Code Number SA T Devices ST ARCAST ---------------------------------------- 41 SUPERGUIDE ------------------------------------ 020 124 125 TEECOM ------------------------------------------- 023 026 075 087 088 090 107 130 137 TOSHIBA ------------------------------------------ 002 127 TOWN & COUNTR [...]

40 Manufacturer/Brand Set-Up Code Number TV Devices CETRONIC ---------------------------------------- 43 CITIZEN ------------------------------------------- 197 002 003 004 043 101 103 143 CLASSIC ------------------------------------------- 43 CONCER TO --------------------------------------- 4 CONTEC ------------------------------------------- 043[...]

41 Setup Code T able Manufacturer/Brand Set-Up Code Number TV Devices PHILCO -------------------------------------------- 197 003 024 056 059 060 063 064 164 004 PHILIP S -------------------------------------------- 197 003 004 005 038 059 093 164 127 PIONEER ------------------------------------------ 197 018 023 025 116 135 190 POR TLAND ---------[...]

42 Manufacturer/Brand Set-Up Code Number VCR Devices AIW A ----------------------------------------------- 034 161 AKAI ----------------------------------------------- 016 043 046 124 125 142 146 AMPRO -------------------------------------------- 72 ANAM ---------------------------------------------- 31 AUDIO DYNAMICS ---------------------------- 0[...]

43 Setup Code T able RADIO SHACK ---------------------------------- 123 RCA ------------------------------------------------- 013 020 041 107 109 140 144 145 147 034 040 158 REALISTIC ---------------------------------------- 003 008 010 014 031 034 040 053 054 101 RICO ------------------------------------------------ 58 RUNCO ----------------------[...]

44 S pecifications Packing Instructions In the event it is necessary to repack the equipment for shipment, use the original shipping carton and interior parts only if they are all in good serviceable condition. If a shipping carton or the interior packing is needed, please call or write Customer Service Department of McIntosh Labora- tory . Please [...]

45 W elcome to the family of McIntosh owners. This is the W arranty for your new McIntosh Home Electronic Product (the Product). Y our Product has been designed to give many years of trouble-free performance. Nonetheless, failures do sometimes occur even with equipment as well- built as McIntosh s. Therefore, please read this W arranty car[...]

46 Scope and Duration of W arranty Subject to the terms and conditions stated be- low , McIntosh Laboratory , Inc. (McIntosh) warrants to the original owner that this Product shall be free from defects in workmanship or materials for a term of one (1) year from the date when it was purchased from an Authorized McIn- tosh Dealer. Limitations o[...]

47 Parts and Occurrences that are not Covered by the W arranty This W arranty does not cover any of the following: (a) glass panels, cabinetry , trim, or other appearance items (except where they are defective at the time of original sale and the Product is delivered for repair within the first thirty (30) days thereafter); (b) failures arising fro[...]

McIntosh Part No. 040774 McIntosh Laboratory , Inc. 2 Chambers Street Binghamton, NY 13903[...]