Marantz RC1200 Bedienungsanleitung

Model R RC1200 User Guide Lear ning Remote Control[...]

1 ENGLISH MAIN FEA TURES & FUNCTIONS ........ 2 NAMES OF PARTS & FUNCTIONS ..... 3 LO ADING B A TTERIES .......................... 8 BASIC OPERA TION .............................. 9 USE MODE ............................................................. 9 LEARN MODE ...................................................... 10 PROGRAMMING THE J[...]

2 ENGLISH MAIN FEATURES & FUNCTIONS • PROGRAMMABLE LEARNING FUNCTION Can easily be programmed to learn the codes for almost any other infrared-based remote, allowing the remote control functions for many different components to be consolidated conveniently in a single unit. This remote controller uses a non-volatile memory so that the learned[...]

3 ENGLISH NAMES OF PARTS & FUNCTIONS Names of Buttons & Functions z MODE button Used to change the operation mode of the remote controller. Pressing this button cycles the remote controller through USE → LEARN → NAME → CLONE TX → CLONE RX → USE , with the currently selected mode displayed on the LCD. x MACRO button Used to store a[...]

4 ENGLISH , Function buttons Used to switch the remote controller to the command sets for specific sources (amplifier, receiver, etc.), thereby allowing a single remote controller to control up to 11 different components. To use these buttons to switch the amplifier’s source, press the desired button twice within 2 seconds. The AMP button , is us[...]

5 ENGLISH ⁄4 GUIDE button Used to call up the on-screen menus used to control DVD players, digital satellite systems (DSS), and other menu-equipped systems. ⁄5 CLEAR button Used to clear the contents of memory or programmed functions. ⁄6 MEMO button Used to program your CD player’s track memory, or to enter a VCR recording program, and can [...]

6 ENGLISH A B I J D H G C E F LCD (Liquid Crystal Display) Information about currently selected functions and modes is displayed on the LCD. Pressing any buttons will call up a full display of information on the status of that function or mode. This display will disappear after approximately 1 minute, except for the Function Name indicator A , whic[...]

7 ENGLISH G NAME indicator Indicates when the remote controller is in the NAME mode and a function name is being changed. H MACRO indicator Indicates when the remote controller is in the MACRO programming mode. I CURSOR indicator Indicates when the CURSOR CONTROL buttons are in the cursor mode. J CONTROL indicator Indicates when theCURSOR CONTROL b[...]

8 ENGLISH LOADING BATTERIES The life of the batteries used with the remote control unit is about 6 months with normal use. Also be sure to replace batteries earlier when you notice that they are getting weak. Do not use alkaline, manganese, nickel-cadmium (Ni- Cd) or other different types of batteries together. (1) Remove the back cover. (2) Insert[...]

9 ENGLISH MEMO CLEAR GUIDE MUTE 1 2 3 4 5 CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL MATRIX MOVIE 2CH OSD SLEEP CD LD BASIC OPERATION USE MODE The remote controller will normally be used in the USE mode. It comes preset with codes commonly used to control 11 types of components manufactured by Marantz, Philips and R[...]

10 ENGLISH If it is left for approximately 1 minute without pressing any buttons, all items on the LCD will go off except the function indicator. Even if the display goes off, the remote controller will retain the status established before the display went off. When any button is pressed, the display will appear on the whole LCD display. LEARN MODE[...]

11 ENGLISH MEMO CLEAR GUIDE MUTE 1 2 3 4 5 6 7 8 0 9 DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL MATRIX MOVIE 2CH OSD SLEEP CH VOL OK CD DVD CD R/ MD OK MEMO CLEAR GUIDE MUTE 1 2 3 4 5 DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL LD 3. If the cursor is not aligned with the control mode after the LD function button , o[...]

12 ENGLISH • In the rare event that NG appears on the LCD, it means that the remote controller you are attempting to learn from uses special signals that cannot be learned by the Marantz remote controller. 6. Follow the same procedure to make the remote controller learn the ten-key ⁄7 operation used by the laser disc player’s remote controlle[...]

13 ENGLISH PROGRAMMING THE JOG DIAL Let’s use the example of setting as the SIDE-B code for the laser disc player. 1. Use a ballpoint pen or other sharp point to press the MODE button z until the LEARN indicator is displayed and starts to blink. 2. Place the laser disc’s remote controller so that its infrared transmitter window is facing the in[...]

14 ENGLISH MEMO CLEAR GUIDE MUTE 1 2 3 4 5 CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL CD LD • If you do not wish to rewrite the name, simply press the OK Cursor button ⁄0 . • If you wish to rewrite the name, input the desired characters using the ten-key pad ⁄7 . The part of the display which is to be overwr[...]

15 ENGLISH 4. The left-hand edge of LCD B now blinks to indicate that the character at the blinking location can now be overwritten. New characters entered will be written over the top of the current character so that the current character is erased. Use the < and > Cursor buttons ⁄0 to select the characters to be rewritten. 5. Use the ten-[...]

16 ENGLISH ON OFF ON / OFF SOURCE MACRO MODE LEARNING REMOTE CONTROL RC 1200 POWER 7. Follow the same procedure to enter “D- A”. When finished, press the OK Cursor button ⁄0 . Pressing OK permanently fixes the newly written characters. Similarly, the function names can be overwritten by pressing the function buttons. • Up to 5 characters ca[...]

17 ENGLISH MEM O CLEAR GUIDE MU TE CH VOL OK 1 2 3 4 5 CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL CD CLEAR OK w q ON OFF ON / OFF SOURCE MACRO MO DE LEARNING REMOTE CONTROL RC 1 200 POWER 2. Erasing by Button(s) To clear the codes and names programmed in any of the buttons • Press the button concerned twice while [...]

18 ENGLISH MEMO CLEAR GUIDE MUTE ENT ENT CH VOL OK 1 2 3 4 5 CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL CD CLEAR ENT ENT q w CH VOL OK CD DVD CD - R/MD OK 3. Erasing Jog Dial Codes To clear all codes and names previously set for each of the functions (LD, TV, etc.). • Press the function button whose codes are to b[...]

19 ENGLISH MEMO CLEAR GUIDE MUTE 1 2 3 4 5 CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL MA TRIX MOVIE 2CH OSD SLEEP CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX CLEAR q w 4. Erasing Codes by Function This procedure clears all the codes and names programmed for the LD, TV or any another function. • When the bu[...]

20 ENGLISH ON OFF ON / OFF SOURCE MACRO MODE LEARNING REMOTE CONTROL RC 1200 POWER To go ahead with the clearing operation, release the buttons, and press the OK Cursor button ⁄0 . Once the data is cleared, the codes are either returned to their original display or left empty. LCD is similarly returned to its factory preset or left empty. All the[...]

21 ENGLISH MEM O CLEAR GUIDE MU T E EN ENT CH V O OK CD DVD CD-R/ M D DSS T V VCR AM P LD TUN ER TA P E AU X AUTO DOLBY THX DTS HAL L OK LD q w 2. Press the Function button , for which you wish to program a series of operations. In this case, let’s use the example of the laser disc player. Press the LD Function button , . Example The LCD A will d[...]

22 ENGLISH • If, while programming, no buttons are pressed for approximately 1 minute, the remote controller will automatically return to normal mode, and no macro will be programmed in the memory. 4. When you are finished programming macros, use a ballpoint pen or other sharp point to press the MACRO button x . LCD A will display END , and the d[...]

23 ENGLISH MEM O CLEAR GUIDE MUTE 1 2 3 4 5 AMP LD TUN ER TA P E AUTO DOLBY THX DTS HALL MATRIX MOVIE 2CH OSD SLEEP CLEAR MEM O CLEAR GUIDE MUTE 1 2 3 4 5 6 7 8 0 9 AMP LD TUN ER TA P E AUTO DOLBY THX DTS HALL MATRIX MOVIE 2CH OSD SLEEP MEM O CH VOL OK CD DVD CD-R/ MD OK q w e • The is highlighted if no macros have been programmed, and the remote[...]

24 ENGLISH MEM O CLEAR GUIDE MUTE CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL CLEAR CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX • If while editing macros no buttons are pressed for approximately 1 minute, the remote controller will automatically return to normal mode, and no macro changes will be programmed[...]

25 ENGLISH MEMO CLEAR GUIDE MUTE CH VOL OK 1 2 3 4 5 6 7 8 0 9 CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL MATRIX MOVIE 2CH OSD SLEEP OK CD 3 e q w ON OFF ON / OFF SOURCE MACRO MO DE LEARNING REMOTE CONTROL RC 1200 POWER EXAMPLES OF MACRO PROGRAMS Example 1 Change the input source for the amplifier to CD and play the[...]

26 ENGLISH ON OFF ON / OFF SOURCE MACRO MODE LEARNING REMOTE CONTROL RC 1200 POWER MEMO CLEAR GUIDE MUTE CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL CD LD When you are finished programming the macro, use a ballpoint pen or other sharp point to press the MACRO button x . Now, execute the macro you just programmed. 1. [...]

27 ENGLISH MEMO CLEAR GUIDE MUTE CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL CD LD 3. To set the various steps of the macro, press the following buttons in order: AMP , , POWER ON c , LD , , AMP * , , 2 (DOLBY) ⁄7 , TV * , , VIDEO (use Jog Dial m to select VIDEO and press ENT button n ) , LD * , , 3 ⁄0 . 4. When [...]

28 ENGLISH MEM O CLEAR GUIDE MUTE CH VOL OK 1 2 3 4 5 6 7 8 0 9 CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL MATRIX MOVIE 2CH OSD SLEEP CD CLEAR LD OK e w q CLEARING MACRO PROGRAMS The following procedure is used to erase macros you have programmed into the remote controller’s memory. • When one of the function bu[...]

29 ENGLISH ON OFF ON /OFF SOURCE MACRO MODE LEARNING REMOTE CONTROL RC 1200 POWER ON OFF ON /OFF SOURCE MACRO MODE LEARNING REMOTE CONTROL RC 1200 POWER 5cm ON OFF ON / OFF SOURCE MACRO MODE LEARNING REMOTE CONTROL RC 1200 POWER USING THE CLONE MODE All the codes which have been programmed can be copied altogether into another RC1200 remote control[...]

30 ENGLISH ON OFF ON / OFF SOURCE MACRO MODE LEARNING REMOTE CONTROL RC 1200 POWER CH VOL OK OK 3. Use a ballpoint pen or other sharp point to press the MODE button z on the receiving unit to call up the CLONE and RX displays. CLONE appears at LCD A and RX at LCD B . 4. Press the OK Cursor button ⁄0 on the receiving unit. 5. Press the OK Cursor b[...]

31 ENGLISH ON OFF ON / OFF SOURCE MACRO MODE LEARNING REMOTE CONTROL RC 1200 POWER • Copying takes about 3 minutes to complete if the programming capacity in the sending unit is 100%. 7. When copying is completed, use a ballpoint pen or other sharp point to press the MODE button z on both remote controllers to call up the USE display. Note: If RX[...]

32 ENGLISH ON OFF ON / OFF SOURCE MACRO MODE LEARNING REMOTE CONTROL RC 1200 POWER MEM O CLEAR GUIDE MUTE 1 2 3 4 5 AMP LD TUN ER TA P E AUTO DOLBY THX DTS HALL MEM O COPY MODE In the copy mode, the preset codes or programmed codes stored in the buttons can be transferred (copied) to other keys as desired. The information that will be copied includ[...]

33 ENGLISH MEM O CLEAR GUIDE MUTE 1 2 3 4 5 6 7 8 0 9 CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL MA TRIX MOVIE 2CH OSD SLEEP CD LD 1 q w MEMO CLEAR GUIDE MU TE 1 2 3 4 5 6 7 8 0 9 CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL MA TRIX MOVIE 2CH OSD SLEEP CD DVD 1 q w 3. Select 1 of the L[...]

34 ENGLISH ON OFF ON / OFF SOURCE MACRO MODE LEARNING REMOTE CONTROL RC 1200 POWER MEM O CLEAR GUIDE MUTE 1 2 3 4 5 6 7 8 0 9 DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL MATRIX MOVIE 2CH OSD SLEEP MEM O ENT ENT CH VOL OK CD DVD CD-R/ MD DSS TV VCR AUX CD ENT q w e COPYING THE JOG DIAL INFORMATION As an example, 1 (DISC+) for the CD [...]

35 ENGLISH CD appears at LCD B , and then the 1 (DISC+) characters stop blinking and remain lighted. (The Jog Dial name is displayed.) The copy source has now been established. " CPY ← " appears at LCD A . 4. The copy destination is selected next. Press the DVD function button , , turn the Jog Dial m to select 1 (OSD), and then press th[...]

36 ENGLISH MEMO CLEAR GUIDE MUTE CH VOL OK 1 2 3 4 5 CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL OK MEMO w q OTHER FUNCTIONS LIGHTING BUTTON To allow easy use in a location which has been darkened for a home theater performance, for instance, this remote controller has an LCD display which lights up. It lights up whe[...]

37 ENGLISH The Setup mode includes the following items, which may be accessed using the ^ and v Cursor buttons ⁄0 . • Switch destination (version) (VER) • Adjust time interval between transmissions of macro operations (MACRO) • LCD lighting duration adjustment (LIGHT) VER: Switches the type of preset codes contained in the remote controller[...]

38 ENGLISH MACRO: Adjusts the time interval between transmissions of macro operations When the v Cursor button ⁄0 is pressed, LCD a displays MACRO , while LCD b displays STEP . One square ( 7 ) in LCD c is equivalent to an interval of 0.5 seconds, allowing intervals of up to 5 seconds to be set. The remote controller is set at the factory with an[...]

39 ENGLISH JOG DIAL COMMAND FUNCTIONS LISTING Each of the 10 Jog Dial commands on the LCD has 5 character labels attached for pre- programmed remote commands. These commands can be used with various Marantz A/V components, or other components using the Philips RC-5 remote control language (without DSS function). You can easily replace the factory-s[...]

40 ENGLISH Function Command Note TV 1 A/CH alternate channel 2 100S 100's 3 VIDEO selects video 4 INFO information 5 S-PIC smart picture 6 S-SUD smart sound 7 S-CH smart channel 8 ADV advance 9 OSD activates on-screen display 0 MENU menu CD 1 DISC+ CD changer next disc 2 DISC- CD changer previous disc 3 TEXT activates text function 4 SHUFL shu[...]

41 ENGLISH Function Command Note DSS/V2 1 DISP brings up on-screen channel marker 2 PREV goes to previously se- lected channel 3 SELCT selects TV or VCR 4 AUDIO audio track selector 5 F A V favorite users and channel lists 6 AL T alternate audio chan- nel, languages 7 FTCH brings up on-screen channel logos 8ANT select broadcast or cable antenna 9 R[...]

42 ENGLISH For REST setups Function Command Note MD 1 REC recor ds pause 2 REPT selects repeat mode 3 RANDM random play 4 DISP selects display mode 5 EDIT selects edit mode 6 EJECT eject 7 LP selects SP/LP mode 8 DEL selects delete 9 ENTER selects enter 0 SYNC SYNCRO. r ecording[...]

43 ENGLISH SPECIFICATIONS System ........ Infrared type programmable remote control Learning and transmission-capable infrared carrier frequency band ............................................ 20 t o 70 kH z Transmission infrared wavelength band ...... 950+/-45nm Maximum number of programmable codes .............. 40 7 Power supply ..............[...]

MEMO CLEAR GUIDE MUTE ENT ENT CH VOL OK 1 2 3 4 5 6 7 8 0 9 CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL MATRIX MOVIE 2CH OSD SLEEP ON OFF ON / OFF SOURCE MACRO MODE LEARNING REMOTE CONTROL RC 1200 POWER z ⁄8 b c x v n . ⁄0 , ⁄7 ⁄3 ⁄4 ⁄1 m ⁄2 ⁄9 ⁄6 ⁄5[...]

[...]

Printed in Japan 00/02 287W851250 (MITi) “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. © 1992-1997 Dolby Laboratories, Inc. All rights reserved. “DTS” and “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc. © 1996 Digital Theater Systems, Inc. [...]