Jensen Mobile Multimedia AM/FM/DVD Receiver VM9410 Bedienungsanleitung

SRC PWR VM9410 VM9410 ENTER Push AV AUX IN 7-INCH TFT OPEN DVD-R LO/DX 2-6CH VM9410 Owner’ s Manual[...]

ii Thank you for choosing a Jensen product. We hope y ou will find the instructions in this owner ’s manual clear and easy to follow. If you t ake a few minutes to look through it, you’ll learn how to use all the features of your new Jensen VM941 0 Mobile Multimedia AM/FM/DVD Receiver for maximum enjoyment. Preparation .................. ......[...]

VM9410 1 PREPAR ATION Congratulations on your pur chase of the Jensen VM9410 Mobile Multimedia AM/FM/DVD Receiver . It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen VM9410 installed by a reputable installation shop. Features 1. 1 DIN Size. 2. Ultra slim slot-in DVD core mechanism.[...]

VM9410 2 INSTALLATION Pre-installation 1. Press the metal levers on both sides to remove the half- sleeve from the radio. 2. Remove the transport screws. 3. Install the half-sleeve. a. Install adapter if necessary (optional). b. Install half-sleeve into adapter or dashboard (only use the supplied screws). Do not force the sleeve into the opening or[...]

VM9410 3 Antenna Ja ck ACC Auto ante nna co ntrol(co nnect t o antenna contr ol lead & power supp ly of antenna amplif ier) Externa l power ampl if ier c ontrol GND CENTER SUB.W SURROUND REAR R BATT ACC REVERSE + ANT .CONT P .CO NT PRK SW FRON T L FRON T R SURROUND REAR L REAR L FRON T L FRON T R AUX IN/ L AUX IN/ R AUX IN VIDEO HEADPHONE L HEA[...]

VM9410 4 CONTROLS AND INDICATOR S Button Operation 1. OPEN Press the OPEN button (1) to activate the automatic mechanical system and move t he TFT monitor into viewing position. 2. WIDE/PICTURE Press the WIDE/PICTURE button (2) to adjust the display aspect of the picture to one of three settings: Wide, Full or Normal. 3. ( ) Press the button (3) to[...]

VM9410 5 CONTROLS AND INDICATOR S 10. 3/SCN DVD Mode: Press once to start scan playback. TUNER Mode: Press once to play preset radio station channel 3. Press and hold to store the current radio station in preset channel 3. 11 . 4 / R E P DVD Mode: Press once to start repeat playback. TUNER Mode: Press once to play preset radio station channel 4. Pr[...]

VM9410 6 CONTROLS AND INDICATOR S LCD Display/Indicators 1. Disc Indicator Illuminated when disc is loaded 2. DVD Playback Indicators (SCN/RPT/RDM/ALL) The following DVD pl ayback indicators become Illuminated when the corresponding function is active: • SCN: scan playback • RPT : repeat playback • RDM: random playback • ALL: playback all c[...]

VM9410 7 FRONT ZONE REMOTE CONTROL T able 1: Fron t Zone Remote Control Functions Button Funct ion Name Ref # DVD VCD CDC TUNER CD/MP3 MENU 1 Enters the main menu of the disc Turns on PBC when playing VCD TITLE 2 Enters the title menu of the disc Plays first ten seconds of each chapte r/title MUTE 3 T oggles on/off audio output T oggles on/off audi[...]

VM9410 8 22 Slow pl ayback/slow rewind playback Slow playback/sl ow rewind playback ZOOM 23 Zooms in/out on an image Zooms in/out on an image PIC 24 Displays set-up param- eters Displays set-up param- eters OPEN/ CLOSE 25 Opens/Closes t he TFT monitor Opens/Close s the TFT monitor Opens/Close s the TFT monitor Opens/Closes the TFT monitor Opens/Clo[...]

VM9410 9 REAR ZONE REMOTE CONTROL T able 2: Rear Zo ne Remote Cont rol Functions Button Funct ion Name Ref # DVD VCD MENU 1 Enters the main menu of the disc Turns on PBC when playing VCD TITLE 2 Enters the title menu of the disc Plays first ten seconds of each chapter/title MUTE 3 T oggles on/off audio output T oggles on/of f audio output AUDIO 5 S[...]

VM9410 10 USING THE TFT MONITOR Open/Close TFT Monitor Open TFT Monit or Press the OPEN button (1) on the front panel or press the ( ) button (25) of the front zone remote control to activate the mechanism that moves the di splay panel into the viewing position. Close TFT Monitor Press the OPEN button (1) on the front panel or press the ( ) button [...]

VM9410 11 OPERATING INSTRUCTIONS Power On / Off Press the /MUTE button (1) to turn the unit on. The buttons on the front of the unit light up and “WELCOME” appears briefly in the LCD panel (17), followed by the current mode status. If the TFT screen is open, only the current mode status is displayed. Y ou can al so turn on the unit by pressing [...]

VM9410 12 SYSTEM SETUP MENU In “System Setup” mode, “ASP CONFIG” and “GENERAL SETUP” are available for adjustment. Setup can be performed by pressing the dedicated button on the remote control or on the front panel. For system settings, press the SYS SETUP button (31) on the remote control to enter the “System Setup” menu. “ASP CO[...]

VM9410 13 Adjusting a Feature 1. Enter the option field for the feature you want to adjust by pressing the button (18) on the remote or by pressing the ENTER (joystick) button (20) on the unit. A submenu appears in a second row with the selected option highlighted in light blue. 2. Select a new value by pressing the or buttons ( 14, 22) on the remo[...]

VM9410 14 T UNER OPER ATION Tuner TFT Display 1. Current Radio Band Indicator 2. Radio Frequency Indicator 3. Clock 4. S tereo Broadcasting Indicator 5. S trong Local Signal Broadcasting Indicator 6. Preset Radio S tations 7. Front Zone Playing Mode 8. Rear Zone Playing Mode 9. User Defined Equalizer Level 10. Loud Setting Indicator 1 1. Current Pr[...]

VM9410 15 DVD PLAY ER OPERATION NOTE: When properly installed, DVD video cannot be displayed on the main TFT scre en unless the parking break is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays “P ARKING” with a blue background. Rear video screens, if applicable, will operate normally . Opening/Closing [...]

VM9410 16 playback. Depending upon the channel selected and your speaker setup, the audio output varies according to the following table. NOTE: The information in the abo ve table is valid only when the setup values for “Front Speaker”, “Cent er Speaker”, and “Surround Speaker” are set to “low”. Goto Search During DVD or VCD playbac[...]

VM9410 17 • Rear: AUX IN – “AUX IN” is the current playing source for the rear zone. “Surround” is the current playback audio encoding system. “DSP” indicates Digita l Signal Processing. VCD Playback Information The following information is displayed at the top of the screen during VCD playback: • VCD2.0 – Format of current di s[...]

VM9410 18 DVD SE TU P M EN U In “DVD Setup” mode, “LANGUAGE”, “VIDEO”, “AUDIO”, “SURR SETUP”, and “RA T ING” (parental lock) are available for setup. This operation can be performed using the remote control or joystick controls. Accessing the DVD Setup Screen For system settings, press the DVD SETUP button (31) on the remote[...]

VM9410 19 SURROUND SETUP Menu T o change speaker settings for 2-channel mode, use the or button s (14, 22) on the remote control or the or buttons (18, 19) on the joystick to select “Stereo”. T o change speaker settings for 6-channel mod e, select “Multi-CH”. Af ter selecting 2 or 6-channel mode, use the button (19) on remote control or the[...]

VM9410 20 CD PLAYER/CHANGER OPER ATION Instructions for Insert/Eject, Play/Pause, Stopping Playback, T rack Selection, Fast Forward/Fast Reverse, Scan, and Random Play are the same for DVD, CD, CD Changer and MP3 operation. Please see the DVD Player Operation section for information about these topics. NOTE: Upon inserting a disc with the TFT scree[...]

VM9410 21 T R OUBLESHOOTING T able 18: Troubleshooting Problem Cause Corrective Action GENERAL Unit will not power on Radio Fuse blown Install new fuse with correct rating Car battery fuse blown Install new fuse with correct rating Illegal operation Press the RESET button located in the bottom right co rner of the front panel Remote control does no[...]

VM9410 22 Error Messages Care and Maintenance 1. Use only a clean silicone cloth and neutral detergent to clean the front panel or monitor . A rough cloth and non- neutral detergent (such as alcohol) may resu lt in scratching or discoloration. 2. Do not get water or cleaning fluids on the unit. 3. If the temperature inside the player gets too hot, [...]

VM9410 23 SPECIFICATIONS CEA Power Ratings Power Output : 13 watts RMS X 4 channels into 4-ohms @ < 1% THD+N Signal to Noise Ratio : 70dBA below reference. (R eference: 1 watt, 4-ohms) Dynamic Power : 64 watts into 4-ohms, all channels driven Frequency Response : 20Hz to 20kHz, -3dB. Aux inp ut used as source reference Reference Supply V oltage [...]