Intel SE400BX Bedienungsanleitung

SE440BX Motherboard Product Guide Order Number: 697967-001[...]

Revision History Revision Revision History Date -001 First release of the SE440BX Motherboard Product Guide. February, 1998 If an FCC declaration of conformity marking is present on the board, the following statement applies: FCC Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two [...]

iii Contents 1 Motherboard Features Features Summary ............................................................................................................... 7 Components ..................................................................................................................... .... 8 Back Panel I/O Connectors .....................[...]

Contents iv How to Install Memory .........................................................................................................2 7 How to Remove Memory .....................................................................................................29 How to Replace the Battery .......................................................[...]

SE440BX Motherboard Product Guide v A Error Messages BIOS Beep Codes ...............................................................................................................5 7 BIOS Error Messages .........................................................................................................57 B Regulatory and Integration Informati[...]

Contents vi 14. Security Menu ............................................................................................................41 15. Power Menu ...............................................................................................................42 16. Boot Menu ..................................................................[...]

7 1 Motherboard Features This chapter gives an overview of the SE440BX motherboard, including: • Features • Components • Back panel I/O connectors The remaining chapters explain how to: • Add or upgrade components like processors or memory • Use the BIOS Setup program to modify the motherboard’s configuration • Upgrade the BIOS Featur[...]

Motherboard Features 8 Components Figure 1 shows the major components on the motherboard. OM07065 B H E D F G C A J I K L U T R Q N O S P M X V W A Wake on Ring connector M Power supply connector B Wake on LAN †† technology connector (optional) N Diskette drive connector C Fan 3 connector O SCSI LED connector D Telephony connector (optional) P [...]

SE440BX Motherboard Product Guide 9 Back Panel I/O Connectors Figure 2 shows the back panel I/O connectors on the motherboard. OM06985 BD E H IK J A G F C A PS/2 † keyboard or mouse G Serial Port B B PS/2 keyboard or mouse H MIDI/game Port (optional) C USB Port 1 I Audio Line Out (optional) D USB Port 0 J Audio Line In (optional) E Serial Port A [...]

Motherboard Features 10 Microprocessor The motherboard supports a single Pentium II processor operating at any of the Pentium II processor speeds, voltages, and bus frequencies. Processors are not included with the SE440BX motherboard and must be purchased separately. The processor is packaged in a Single Edge Contact (S.E.C.) cartridge. The cartri[...]

SE440BX Motherboard Product Guide 11 Input/Output (I/O) Controller The I/O controller handles the exchange of information between the processor and external devices like the mouse and keyboard or a printer that are connected to the computer. The controller features the following: • Integrated keyboard and mouse controller • Industry standard di[...]

Motherboard Features 12 • Support for up to 127 physical devices • Guaranteed bandwidth and low latencies appropriate for telephony, audio, and other applications ✏ NOTE Computer systems that have an unshielded cable attached to a USB port may not meet FCC Class B requirements, even if no device or a low-speed USB device is attached to the ca[...]

SE440BX Motherboard Product Guide 13 IDE Auto Configuration If you install an IDE device (e.g., a hard drive) in your computer, the IDE auto-configuration utility in the BIOS automatically detects and configures the device for your computer. You do not need to run the BIOS Setup program after installing an IDE device. ISA Plug and Play Capability T[...]

Motherboard Features 14 Power Management The motherboard supports two types of power management — Advanced Power Management (APM) and Advanced Configuration and Power Interface (ACPI). Advanced Power Management (APM) APM’s energy saving standby mode can be initiated in the following ways: • Specify a time-out period in Setup • Press the sus[...]

SE440BX Motherboard Product Guide 15 Wake on Ring Wake on Ring enables the computer to wake from sleep or soft-off mode when a call is received on a telephony device, such as a modem, configured for operation on COM1. The first incoming call powers up the computer. A second call must be made to access the computer. To access this feature use the Wa[...]

Motherboard Features 16 Crystal Semiconductor CS4236B Audio Codec The CS4236B audio codec’s features include: • Compatibility with Sound Blaster † , Sound Blaster Pro † , and Windows Sound System • MPU-401 compatible MIDI and joystick interfaces • Advanced MPC3-compliant input and output mixer Crystal Semiconductor CS4611 PCI Audio Acce[...]

17 2 Installing and Replacing Motherboard Components This chapter describes the following: • How to install and remove the motherboard • How to install a processor • How to prepare the motherboard for a boxed Pentium II processor • How to install and remove memory • How to replace the battery • How to use the configuration jumper to set[...]

Installing and Replacing Motherboard Components 18 How to Install and Remove the Motherboard Refer to your chassis manual for instructions on installing and removing the motherboard. The motherboard is secured to the chassis by seven screws. Figure 3 shows the locations of the mounting screw holes. ✏ NOTES You will need a Phillips (#2 bit) screwd[...]

SE440BX Motherboard Product Guide 19 Install the Retention Mechanism To install the retention mechanism, follow these steps: 1. Observe the precautions in “Before You Begin” (see page 17). 2. Find the Slot 1 connector on the motherboard (see Figure 4). OM07025 D A C B A Retention bracket C Fastener retainer pins B Press-fit fasteners D Slot 1 c[...]

Installing and Replacing Motherboard Components 20 Install the Processor To install the processor, follow these steps: 1. Insert the processor in the retention mechanism as shown in Figure 5. 2. Press down on the processor until it is firmly seated in the Slot 1 connector and the latches on the processor lock into place. A B B OM07061 A Retention m[...]

SE440BX Motherboard Product Guide 21 3. Slide the top heatsink support bar onto the retaining pins of the support’s base as shown in Figure 6. A OM07060 B A Heatsink support bar B Retaining pins Figure 6. Installing the Heatsink Support Top Bar How to Set the Processor Speed Set the processor speed after you have installed or upgraded the process[...]

Installing and Replacing Motherboard Components 22 CAUTION To avoid bending or breaking pins, use caution when removing or installing a jumper. To set the processor speed, follow these steps: 1. Observe the precautions in “Before You Begin” (see page 17). 2. Turn off all peripheral devices connected to the computer. Turn off the computer. 3. Re[...]

SE440BX Motherboard Product Guide 23 How to Upgrade to a Boxed Pentium ® II Processor Use the instructions in this section to prepare the motherboard for a boxed Pentium II processor upgrade. To prepare for a boxed Pentium II processor upgrade, in brief you must: 1. Remove the heatsink support top bar and the installed processor. 2. Remove the hea[...]

Installing and Replacing Motherboard Components 24 6. Remove the top bar of the heatsink support from the base as shown in Figure 8. Press in on the latches to release the top bar. B B OM07059 A A Heatsink support top bar B Latches Figure 8. Removing the Heatsink Support Top Bar and the Processor CAUTION Pressing on the motherboard or components wh[...]

SE440BX Motherboard Product Guide 25 Remove the Heatsink Support Base ✏ NOTE To remove the heatsink support base from the motherboard, you need a special removal tool (MID #58982) that is available from Dexter Design (call 503-648-7000 for ordering information). To remove the heatsink support base, follow these steps: 1. With your fingers, remove[...]

Installing and Replacing Motherboard Components 26 2. Place the heatsink support removal tool over the two outside posts of the heatsink support base as shown in Figure 10. Make sure the tool completely engages the posts. OM07058 B A A Heatsink support removal tool B Heatsink support base Figure 10. Placing the Heatsink Support Base Removal Tool on[...]

SE440BX Motherboard Product Guide 27 Upgrade the Processor See the documentation that came with the boxed Intel Pentium II processor. How to Install Memory You can install from 8 MB to 384 MB of memory in the motherboard DIMM sockets. The board has DIMM sockets arranged as banks 0, 1, and 2. The motherboard supports the following memory features: ?[...]

Installing and Replacing Motherboard Components 28 Figure 12 shows the location of the DIMM sockets. OM07067 2 1 0 Figure 12. Location of DIMM Sockets To install DIMMs, follow these steps: 1. Observe the precautions in “Before You Begin” (see page 17). 2. Turn off all peripheral devices connected to the computer. Turn off the computer. 3. Remov[...]

SE440BX Motherboard Product Guide 29 OM07068 Figure 13. Installing a DIMM How to Remove Memory To remove a DIMM, follow these steps: 1. Observe the precautions in "Before You Begin" (see page 17). 2. Turn off all peripheral devices connected to the computer. Turn off the computer. 3. Remove the computer cover. 4. Gently spread the retaini[...]

Installing and Replacing Motherboard Components 30 How to Replace the Battery When your computer is turned off, a lithium battery maintains the current time-of-day clock and the values in CMOS RAM current. Figure 14 shows the location of the battery. The battery should last about seven years. When the battery begins to die, it loses voltage; when t[...]

SE440BX Motherboard Product Guide 31 To replace the battery, follow these steps: 1. Observe the precautions in “Before You Begin” (see page 17). 2. Turn off all peripheral devices connected to the computer. Turn off the computer. 3. Remove the computer cover. 4. Locate the battery on the motherboard (see Figure 14). 5. With a medium flat-bladed[...]

Installing and Replacing Motherboard Components 32 How to Clear the Passwords This procedure assumes that the motherboard is installed in the computer and the configuration jumper block is set to normal mode. 1. Observe the precautions in “Before You Begin” (see page 17). 2. Turn off all peripheral devices connected to the computer. Turn off th[...]

33 3 Using the Setup Program This chapter provides an overview of the Setup program. You can use the Setup program to change the configuration information and boot sequence for the computer. ✏ NOTE For reference purposes, you should write down the current Setup settings. When you make changes to the settings, update this record. Setup Program Mod[...]

Using the Setup Program 34 Setup Menus To enter the Setup program, turn the computer on and press <F2> when you see the message: Press <F2> Key if you want to run SETUP Table 2 is an overview of the menu screens in the Setup program. Table 2. Setup Menu Bar Setup Menu Screen Description Maintenance Specifies the processor speed and clea[...]

SE440BX Motherboard Product Guide 35 Maintenance Menu This menu is for setting the processor speed and clearing the Setup passwords. Setup only displays this menu in configure mode. See page 33 for information about setting configure mode. Table 4. Maintenance Menu Feature Options Description Processor Speed • 233 • 266 • 300 • 333 • 350 [...]

Using the Setup Program 36 Advanced Menu This menu is for setting advanced features that are available through the chipset. Table 6. Advanced Menu Feature Options Description Plug & Play O/S • No (default) • Yes Specifies if a Plug and Play operating system is being used. No lets the BIOS configure all devices. Yes lets the operating system[...]

SE440BX Motherboard Product Guide 37 Peripheral Configuration Submenu This submenu is for the configuring the computer peripherals. Table 7. Peripheral Configuration Submenu Feature Options Description Serial port A • Disabled • Enabled • Auto (default) Configures serial port A. Auto assigns the first free COM port, normally COM1, the address[...]

Using the Setup Program 38 Table 7. Peripheral Configuration Submenu (continued) Feature Options Description Parallel port • Disabled • Enabled • Auto (default) Configures the parallel port. Auto assigns LPT1 the address 378h and the interrupt IRQ7. An * (asterisk) displayed next to an address indicates a conflict with another device. Mode ?[...]

SE440BX Motherboard Product Guide 39 IDE Configuration Submenus This submenu is for configuring IDE devices, including: • Primary IDE master • Primary IDE slave • Secondary IDE master • Secondary IDE slave Table 9. IDE Configuration Submenus Feature Options Description Type • None • ATAPI Removable • Other ATAPI • CD-ROM • User ?[...]

Using the Setup Program 40 Floppy Options This submenu is for configuring floppy drives. Table 10. Floppy Options Feature Options Description Floppy Disk Controller • Disabled • Enabled (default) Disables or enables the integrated floppy disk controller. Diskette A: • Disabled • 360 KB, 5¼ ″ • 1.2 MB, 5¼ ″ • 720 KB, 3½ ″ • 1.[...]

SE440BX Motherboard Product Guide 41 Resource Configuration Submenu This submenu is for configuring the memory and interrupts. Table 13. Resource Configuration Submenu Feature Options Description Memory Reservation • C800 - CBFF Available (default) | Reserved • CC00- CFFF Available (default) | Reserved • D000 - D3FF Available (default) | Rese[...]

Using the Setup Program 42 Power Menu This menu is for setting power management features. Table 15. Power Menu Feature Options Description Power Management • Disabled • Enabled (default) Enables or disables the BIOS power management feature. Inactivity Timer • Off (default) • 1 Minute • 5 Minutes • 10 Minutes • 20 Minutes • 30 Minut[...]

SE440BX Motherboard Product Guide 43 Table 16. Boot Menu (continued) Feature Options Description First Boot Device Second Boot Device Third Boot Device Fourth Boot Device • Removable devices • Hard Drive • ATAPI CD-ROM Drive • Network Boot Specifies the boot sequence from the available devices. To specify boot sequence: 1. Select the boot d[...]

Using the Setup Program 44 Removable Devices Submenu This submenu is for configuring the boot sequence for removable devices. Table 18. Removable Devices Submenu Options Description • Legacy Floppy Drives Specifies the boot sequence for the removable devices attached to the computer. To specify boot sequence: 1. Select the boot device with < ?[...]

45 4 Upgrading the BIOS This chapter describes how to upgrade the BIOS and how to recover the BIOS if an upgrade fails. Preparing for the Upgrade Before you upgrade the BIOS, prepare by: • Obtaining the BIOS upgrade file • Recording the current BIOS settings • Creating a bootable diskette • Creating the BIOS upgrade diskette Obtaining the B[...]

Upgrading the BIOS 46 Creating a Bootable Diskette ✏ NOTE If your drive A is an LS-120 diskette drive, you must use a 1.44-MB diskette as the bootable BIOS upgrade diskette. The computer is unable to recover a BIOS from an LS-120 diskette. 1. Use a DOS or Windows 95 system to create the diskette. 2. Insert a diskette in diskette drive A. 3. At th[...]

SE440BX Motherboard Product Guide 47 5. When the utility asks for confirmation that you want to flash the new BIOS into memory, select Continue with Programming . Press <Enter> . 6. When the utility displays the message upgrade is complete , remove the diskette. Press <Enter> . 7. As the computer boots, check the BIOS identifier (versio[...]

Upgrading the BIOS 48 10. On the jumper block (J8A1), move the jumper back to pins 1-2 as shown below to set normal mode for Setup. 1 3 J8A1 OM07072 11. Leave the upgrade diskette in drive A, replace the computer cover, and connect the computer’s power cord. 12. Turn on the computer and continue with the BIOS upgrade (see page 46). Changing the B[...]

49 5 Technical Reference Motherboard Connectors Figure 15 shows the location of some of the motherboard connectors. OM07066 1 1 1 1 1 1 1 1 1 11 10 20 K L J I AE B F C D GH 1 1 1 5 6 2 A Wake on Ring G Chassis intrusion (optional) B Wake on LAN technology (optional) H Fan 2 C Fan 3 I Fan 1 D Auxiliary Line In (optional) J Power supply E Telephony ([...]

Technical Reference 50 Table 20. Wake on Ring Connector Pin Signal Name 1 Ground 2 RINGA# Table 21. Wake on LAN Technology Connector Pin Signal Name 1 +5 VSB 2 Ground 3 WOL Table 22. Fan 3 Connector Pin Signal Name 1 Ground 2 FAN_CTRL (+12 V) 3 Ground Table 23. Auxiliary Line In Connector Pin Signal Name 1 Left Line In 2 Ground 3 Ground 4 Right Lin[...]

SE440BX Motherboard Product Guide 51 Table 25. CD Audio Connector Pin Signal Name 1 CD_IN-Left 2 Ground 3 Ground 4 CD_IN-Right Table 26. Chassis Intrusion Connector Pin Signal Name 1 Ground 2 CHS_SEC Table 27. Fan 2 Connector Pin Signal Name 1 Ground 2 +12 V 3 FAN_SEN* * If the optional hardware monitor is not available, pin 3 is ground. Table 28. [...]

Technical Reference 52 Table 29. Power Supply Connector Pin Signal Name Pin Signal Name 1 +3.3 V 11 +3.3 V 2 +3.3 V 12 -12 V 3 Ground 13 Ground 4 +5 V 14 PS-ON# (power supply remote on/off control) 5 Ground 15 Ground 6 +5 V 16 Ground 7 Ground 17 Ground 8 PWRGD (Power Good) 18 -5 V 9 +5 VSB 19 +5 V 10 +12 V 20 +5 V Table 30. SCSI LED Connector Pin S[...]

SE440BX Motherboard Product Guide 53 Front Panel Connectors The motherboard has connectors for controls and indicators typically located on the front panel of the computer. OM06986 J8G2 27 1 2 4 6 11 16 20 24 22 AB C D E F G Figure 16. Front Panel Connectors Table 32. Front Panel I/O Connectors Connector Pin Signal Name Connector Pin Signal Name A.[...]

Technical Reference 54 Motherboard Resources Memory Map Table 33. Memory Map Address Range (decimal) Address Range (hex) Size Description 1024 K - 393216 K 100000 - 18000000 383 MB Extended memory 928 K - 1024 K E8000 - FFFFF 96 KB System BIOS 896 K - 928 K E0000 - E7FFF 32 KB System BIOS (available as UMB) 800 K - 896 K C8000 - DFFFF 96 KB Availab[...]

SE440BX Motherboard Product Guide 55 I/O Map Table 35. I/O Map Address (hex) Size Description 0000 - 000F 16 bytes DMA controller 1 0020 - 0021 2 bytes Interrupt controller 1 002E - 002F 2 bytes Super I/O controller configuration registers 0040 - 0043 4 bytes Counter/Timer 1 0048 - 004B 4 bytes Counter/Timer 2 0060 1 byte Keyboard controller 0061 1[...]

Technical Reference 56 PCI Configuration Space Map Table 36. PCI Configuration Space Map Bus Number (hex) Device Number (hex) Function Number (hex) Description 00 00 00 Intel 82443BX (PAC) 00 01 00 Intel 82443BX (PAC) A.G.P. bus 00 07 00 Intel 82371EB (PIIX4E ) PCI/ISA bridge 00 07 01 Intel 82371EB (PIIX4E) IDE bus master 00 07 02 Intel 82371EB (PI[...]

57 A Error Messages BIOS Beep Codes One long beep followed by several short beeps indicates a video problem. Table 38. Beep Codes Beeps Port 80h Code Explanation 1-2-2-3 16h BIOS ROM checksum 1-3-1-1 20h Test DRAM refresh 1-3-1-3 22h Test Keyboard Controller 1-3-3-1 28h Autosize DRAM 1-3-3-2 29h Initialize POST Memory Manager 1-3-3-3 2Ah Clear 512 [...]

Error Messages 58 Table 39. BIOS Error Messages (continued) Error Message Explanation Fixed Disk 0 Failure or Fixed Disk 1 Failure or Fixed Disk Controller Failure Fixed disk is not working or not configured properly. Check to see if fixed disk is installed properly. Run Setup to be sure the fixed-disk type is correctly identified. Incorrect Drive [...]

59 B Regulatory and Integration Information This appendix contains: • Safety standards, electromagnetic compatibility regulations, and product certification markings for this motherboard • Instructions and precautions for integrators who are installing this motherboard in a chassis Regulatory Compliance This motherboard complies with the follow[...]

Regulatory and Integration Information 60 Product Certification Markings This printed circuit board assembly has the following product certification markings: • European CE Marking: Consists of a marking on the board and shipping container. • UL Recognition Mark: Consists of the UL File No. E139761 on the component side of the board and the PB [...]

SE440BX Motherboard Product Guide 61 Ensure Electromagnetic Compatibility (EMC) Before computer integration, make sure that the power supply and other modules have passed EMC testing using a motherboard with a microprocessor from the same family and operating at the same (or higher) speed as the microprocessor on this motherboard. In the installati[...]

Regulatory and Integration Information 62 Prevent Power Supply Overload Unless the power supply has inherent overcurrent protection, do not overload the power supply output. To avoid overloading the power supply, make sure that the calculated total current load of all the modules within the computer is less than the output current rating of the pow[...]