Intel PX875P Bedienungsanleitung

PX875P Series Copyright All rights are reserved. No p art of this public ation may be reproduced, transmitted, transcrib ed, stored in a retrieval system or translated into an y language or computer language, in any form or by any means, electronic, mechanical , magnetic, o ptical, chemical, manual or otherwise, without the prior written permission[...]

You have to know !!! 0 The images and pictures in this manual are for reference only and may vary slightly from actual produ ct installation depending on specific hardware models, third party compone nts and software versions. 0 Unplug your computer when inst alling components and configuring switches and pins. 0 This mainboard contains very delic [...]

PX875P Series ® Intel 82875P & ICH5 Supports Socket 478 Int ® Pentium ® 4 Processor User Manual nabling Hyper-Threading for your computer system requires ALL of BIOS : A BIOS that supports HT Technology must be enabled For more information on Hyper-Threading Technology, go to: http://www.intel.com/ info/hyperthreading el E the following comp[...]

Content s CHAPTER 1. GETTING STARTED ............................................................ 1 I NTRODUCTION .......................................................................................................... 1 S PECIFICATION .......................................................................................................... 2 Q U[...]

PX875P PRO/ PX875P Chapter 1. Getting Started Introduction Congratulations on choosing the PX875P Series ma inboard! Th e PX875P series includes the PX875P PRO (V2.0) and PX875P (V2.0). These are based on the 82875P Northbridge chipset and the IC H5 Southbridge chipset. It supports Intel ® Pentium ® 4 Processors with a FSB (Front Side Bus) freque[...]

PX875P PRO/ PX875P S pecification CPU: z Supports Socket 478 Pentium ® 4 processor (North wood/ Prescott) z Supports Hyper Threading Tech nology Speed: z 400/ 533/ 800 MHz Front Side Bus frequenc y z 33MHz, 32 bit PCI interface (PCI 2.2 compliant) z 66MHz AGP 3.0 compliant interface that supports 8X/4X data transfer m odes (0.8V or 1.5V) Chipset: [...]

PX875P PRO/ PX875P BUS Slots: z AGP slot (AGP3.0, 4X/ 8X) x 1 z 32-bit PCI bus slot x 5 Flash Memory: z Supports flash memory functionality z Supports ESCD functionality Hardware Monitor Function: z Monitors all fan Speeds z Monitors System Voltage Infrared: z Supports IrDA Version 1.0 SIR Protocol with a maximum baud rate of up to 115.2 Kbps z Sup[...]

PX875P PRO/ PX875P Universal Serial Bus: z Supports up to eight USB ports for USB interf ace devices z Supports USB 2.0 Enhanced Ho st Controller Interface (EHCI) and USB 1.1 Open Hos t Controller Interface (OHCI) Serial ATA facilities: z Compatible with SATA Spec 1 .0 z Supports Serial ATA specificati on of 150 MB/sec transfers I/O facilities: z O[...]

PX875P PRO/ PX875P Quick Content T able Function Content Location Page CPU Socket 478 U8 10 DDR DIMM Slot s DIMM 1 、 2 、 3 、 4 11 A TX Power Conne ctor A TX_12V 、 A TX_ PWR 21 IDE Connectors 、 SA T A Connectors IDE1/2 、 SA T A1/2 16 FDC Connector FDC 16 AGP Slot AGP 21 PCI Slots PCI 1 、 2 、 3 、 4 、 5 21 CPU F AN 、 Chassi s F A[...]

PX875P PRO/ PX875P Configuration Layout of PX875P PRO Intel 82875P U8 1 U12 Socket 478 CPUF AN FDC AT X _ P W R A GP PCI1 PCI2 PCI3 PCI4 PCI5 3COM LAN 1 BIOS U21 FRONT AUDIO AUXF AN IrDA SPDIF CD-IN 1 2 1 1 1 2 Winbond W83627THF ALC 655 DIMM4 DIMM2 IDE2 IDE1 DIMM3 DIMM1 USB4 1 2 9 10 USB2 USB3 2 2 1 1 9 10 U19 Intel ICH5 CASE OP EN 1 BA T1 JP1 1 SA[...]

PX875P PRO/ PX875P 7 Layout of PX875P Intel 82875P U8 1 U12 Socket 478 CPUF AN PRT/COM KB/MS USB FDC A TX_PWR A GP PCI1 PCI2 PCI3 PCI4 PCI5 1 BIOS U21 FRONT AUDIO AUXF AN IrDA SPDIF CD-IN 1 2 1 1 1 2 Winbond W83627THF ALC 655 DIMM4 DIMM2 IDE2 IDE1 DIMM3 DIMM1 USB4 1 2 9 10 USB2 USB3 2 2 1 1 9 10 U19 Intel ICH5 CASE OP EN 1 BA T1 JP1 1 SA TA2 SA T A[...]

PX875P PRO/ PX875P 8 Layout of PX875P PRO V2.0 Intel 82875P U8 1 U12 Socket 478 CPUF AN FDC AT X _ P W R A GP PCI1 PCI2 PCI3 PCI4 PCI5 LAN Controller 1 BIOS U21 FRONT AUDIO AUXF AN IrDA SPDIF CD-IN 1 2 1 1 1 2 Winbond W83627THF ALC 655 DIMM4 DIMM2 IDE2 IDE1 DIMM3 DIMM1 USB2 USB3 2 2 1 1 9 10 U19 Intel ICH5 CASE OP EN 1 BA T1 JP1 1 SA TA2 SA T A1 CH[...]

PX875P PRO/ PX875P 9 Layout of PX875P V2.0 Intel 82875P U8 1 U12 Socket 478 CPUF AN FDC A TX_PWR A GP PCI1 PCI2 PCI3 PCI4 PCI5 1 BIO S U21 FRO N T AUDI O AUXF AN IrDA SPDIF CD-IN 1 2 1 1 1 2 Winbond W83627THF ALC 655 DIMM4 DIMM2 IDE2 ID E1 DIMM3 DIMM1 USB2 USB3 2 2 1 1 9 10 U19 Intel ICH5 CASE OPEN 1 BA T1 JP1 1 SA TA2 SA T A1 CHASFAN 1 PWRLED 1 SW[...]

PX875P PRO/ PX875P 10 H This section will assist you in quickl y installin g your system hardware. Wear a wrist ground strap before handling components. El ectrostatic discharge may dama ge your system components. CPU Processor Inst allation This mainboard supports Intel ® Pentium ® 4 processors using a Socket 478. Before building your syste m, w[...]

PX875P PRO/ PX875P 11 F A N Headers Three power headers are available fo r cooling fans, whi ch play an important role in maintain ing the Memory Inst allation The series conta ins 4 memory slots which use 184 pin DDR SDRA M with a total memory capacity of up to 4 GB. You can install unbuffered/non-EC C or with ECC DDR DIMMs. It supports DDR266 whe[...]

PX875P PRO/ PX875P 12 T o Enable Dual-Channel DDR, the follo w ing conditions must be met: M1 & DIMM3 together or DIMM2 & DIMM4 together or all four D IMM tween DIMM2 & DIMM4. Same Density (128MB, 256MB, 512MB, etc.) Same DRAM technology (128Mb, 256Mb, or 512Mb) Same DRAM bus width (x8 or x16) Both either single-sided or dual-sided Same[...]

PX875P PRO/ PX875P 13 B S The series m ovides a /2 mous PS/2 connector. The pin assignments are described below: SB/ (LAN is optional) el w ith V1.0, and there are four U SB connectors on to USB devices such as: T rt. You can plug LAN d evices directly into ack Panel Configuration PS/2 Mouse & PS/2 Keyboard Connectors: KB/M ainboard pr standard[...]

PX875P PRO/ PX875P 14 Serial and Parallel Interface Port s The series mainboard comes equipped with two serial ports and one parallel port on the back panel. These interface ports will be explain ed below. llel interface. The Serial Interface: COM1/ COM2 The serial interface port is some r ronous communication port. Mice, modems and other pe rip ca[...]

PX875P PRO/ PX875P 15 F RLED 、 SPEAKER lies to those IDE dr ives directly att ached to the s ystem ED Header) provides two power LED h eader. If there is a 2-pin power LED cable on the front a computer case. You can attach it to th e 2-pin power LED header. The LED will illum inate the computer is powered on. er on Switch Header) header can be at[...]

PX875P PRO/ PX875P 16 Connectors Floppy Disk Connector: FDC , bles The series mainb PIO Mode 0~4, Bus Master, Ultra AT primary) and IDE2 (secondary). It als IDE1 (Prima You can connect must use a ribbon cable with three conn drive as the slave , using the jumper IDE2 (Seco The IDE2 conn iguration is similar to IDE1. The second The series mainboard [...]

PX875P PRO/ PX875P 17 Headers & Jumpers USB headers (USB2/ 3/ 4) on the board allowing for 6 USB ainboard provide two USB headers ( USB2/ 3) on the board allowing for to US B connectors embedded into the computer case or connected to a ternal USB devices. the USB2, USB3 or USB4 (the USB4 header er: IrDA evice. After the IrDA interface is config[...]

PX875P PRO/ PX875P 18 Case Open W arning Jumper: CASE OPEN his connector is used to notify the user when the comput er case has been previously opened. To nfigure this functionality, your computer case mu st be equippe d with a “case o pen” cable which ou need to attach to th e CASE OPEN jum per. Also, you m ust enable CASE OP EN warning our co[...]

PX875P PRO/ PX875P 19 Audio Connectors his mainboard provides three connector s as part of its audio Subsystem. CD-IN ront Panel Audio Header: FRONT AUDIO your computer case has been designed with embe dded audio equipment or you are using an audio racket (optional). You can attach these co mponents to the FRONT_AUDIO header of the ainboard. First [...]

PX875P PRO/ PX875P 20 S/PDIF Header: SPDIF S/PDIF (Sony/Philips Digital Interface) is an aud io transfer file format, which provides high qual ity f delivering audio output and is header is by using an our computer. This brac ket will have two wires that you can attach to the SPDIF header and the FRONT_AUDIO header. This bracket has RCA connectors [...]

PX875P PRO/ PX875P 21 Slot s The slots in this mainboard are designed for expa nsion cards used to complement and enhan ce the nctionality of the mainboard. GP Slot: AGP his mainboard is equ ipped with an Accelerated Graphics Port ( AGP) that supports 0.8V/1.5V AGP rds o only install .8V/1.5V AGP cards. CI Slot s: PCI1-5 his mainboard is equipped w[...]

PX875P PRO/ PX875P 22 Chapter 2. BIOS Setup troduction This section describes PHOENIX-AWAR D™ BIOS Setup program which resides in the BIOS firmware. The Setup program allows users to modify the basic system configuration. The configuration information is then saved to CMOS RAM where the data is sustained by b attery after power-down. The BIOS pro[...]

PX875P PRO/ PX875P 23 DRAM Support upported CPUs his PHOENIX-AWARD™ BIOS supports the Intel ® Pentium ® 4 CPUs . ey Function general, you can use the arro w keys to highlight items, press <Enter> to select, use the <PgUp> d <PgDn> keys to change entries, press <F1> f or help and press <Esc> to quit. The following t[...]

PX875P PRO/ PX875P 24 PX875P PRO/ PX875P 24 Main Menu When you enter the PHOENIX The Main menu allows you to s to select a particular configurat -AWAR D™ BIOS Utility, the Main Menu will appear on the screen. elect from severa l c onfiguration options. Use the left/right arrow keys ion screen from th e top menu bar or use the down arrow key to ac[...]

PX875P PRO/ PX875P 25 Main Menu Setup Configuration Options Item Options Description Date mm dd yyyy Set the system date. Note that the changes when you se ‘Day’ automatically t the date. Time Hh: mm: ss Set the current time of the system. IDE Channel 0 Options c Master sub menu. ontained in Press <Enter> to enter the sub menu. IDE Channe[...]

PX875P PRO/ PX875P 26 Advanced BIOS Features k Boot Priority Select hard disk boot priority. CD-ROM Boot Priority Select CD-ROM boot priority. First /Second/Third Boot Device Select the order in which d evices will be searched in order to find a boot d evice. Options: Removable (default for first boot device) 、 Hard Disk (default for third boot d[...]

PX875P PRO/ PX875P 27 Advance PU L1 & L2 Cache Mak internal c ctive. System perfor ade if you disable this item s: Enable Disable. Hy hread nology l eadi ou to ena abled the technolog y. Options: Disabled (default) 、 Enabled t All ystem to s e booting. Th d Boot Up Num tus Sel Lock Options efaul pad ke O f f a d k e y s a r e a r r o w k e y [...]

PX875P PRO/ PX875P 28 MPS V ersion Control For OS The 1.1 version is the older version that supports 8 more IRQs in the Windows NT environment. Choose the new 1.4 version for Windows 2000 and Windows XP. Options: 1.4 (default) 、 1.1 OS Select For DRAM > 64MB Select “OS2” only if you are running the OS/2 o p erating system with greater th a[...]

PX875P PRO/ PX875P 29 DRAM RAS# to CAS# Delay This item allows you to select a delay tim e between the CAS and RAS strobe signals. It only applies y the system. Options : 4 、 3 、 2 complete ata. This field is adjustable on ly when “DRAM Timing Se lectable” is set to “manual”. This field is is set to “ By SPD” and is automat ically d[...]

PX875P PRO/ PX875P 30 P. A . T. M o d e Allows user to enable “Perfo rmance Acceleration Technology” in FSB800/ DDR400 mode, u sing PAT can employ a s pecially co nfigured “shortcut ” or “ by pass” when a c cessing memory, sl icing veral clock cycles from the access times and re ducing conventional latenc y factors. Preliminary efficien[...]

PX875P PRO/ PX875P 31 Frequency/V oltage Control g you to use higher “CPU Host Frequency” values. ratio will be determined by t he “CPU Clock Rat io” field. U cloc k ratio is not locked b y the CPU manufacturer. PU Clock Ratio U has not been set to a locked state by th e CPU manufactory. If ou setting for. If you don’t ch ange the “CPU [...]

PX875P PRO/ PX875P 32 Factory Defau lt A vaila ble Options CPU Host Fre quency 100 2.66X 、 2.50X (Debug) 133 Default (default) 、 2.00X 、 2.50X 、 1.33X (Debug) 1.60X (Debug) 、 200 Default (default) 、 1.33X 、 1.60X 、 2.00X 、 2.50X (T urbo) DDR Speed ory spe This item displays the current DDR mem ed. g atically cal culate these equen[...]

PX875P PRO/ PX875P 33 AGP Frequency = 133 / 1.5 = 88.67 PCI Frequency = 133 / 3 = 44.33 SRC Frequency = 133 / 1 = 133.0 AGP Frequency P frequency. default Voltage. lows you to adju st your CPU core voltage. ptions: Default (default) 、 Def ault + 0.3V 、 Default + 0.2V 、 Default + 0.1V his item allows you to adjust the AGP Voltage. ault + 0.1V [...]

PX875P PRO/ PX875P 34 Integ herals ay uses PCI slot or an AGP slot. Options: AGP (default) 、 PCI Slot OnChip IDE Device IDE HDD Block Mode Block mode i wise know r, mu Select the “En option if e su do). The syste m will automati cally det al nu per sector. Options: Enab efault) 、 D On-Chip Primary/Se The mainboard chips et conta erfa c els. S[...]

PX875P PRO/ PX875P 35 IDE Primary/Secondary/Master/Slave PIO tput) fields let you set a PIO mode (0-4) for each of th e IDE rface suppor ts. Modes 0 to 4 will increase performance crementally. I n Auto mode, the system autom atically determines the best mode for each device. 、 Mode1 、 Mode2 、 Mode3 、 Mode4. er / Slave UDMA ltra DMA 100 func[...]

PX875P PRO/ PX875P 36 Serial A T A Port0/ 1 Mode This field determines the operating mode of th e SATA ports. The options are determ ined by the “On-Chip Serial ATA” field. On-Chip Serial ATA – Combined Mode: When you set the “ On-Chip Serial ATA” to “Com bined Mode”, you must select one of the PATA channels to use with the SATA devic[...]

PX875P PRO/ PX875P 37 Onboard LAN Boot ROM Decide whether to invoke th e boot ROM of the onboard LAN chip. Options: Disabled (default) 、 Enabled Onboard I/O Chip Setup PWRON Af ter PWR-Fail This field will determine whether your system w ill boot after rest oring power after a power failure. If you select “On”, the system will boot whether or[...]

PX875P PRO/ PX875P 38 RxD, TxD Active This item determines the RxD and TxD frequencie s. This field only configurable if “UART Mode Select” is set to “ASKIR” or “IrDA”. Options: Hi / Lo (default) 、 Hi / Hi 、 Lo / Hi 、 Lo / Lo figurable if “UART led ode used by th e IR interface . Full-duplex mode p ermits simultaneous ode perm i[...]

PX875P PRO/ PX875P 39 ECP Mode Use DMA Select a DMA Channe l for the parallel port wh en using the E configurable if “P arallel Port Mode” is s CP mode. This field is only et to “ECP”. Options: 3 (default) 、 1 V1.0) (default) 、 209 、 Disabled or V1.0) Game Port Address (onl y for Game Port I/O Address. Options: 201 Midi Port Address ([...]

PX875P PRO/ PX875P 40 Power Management up Menu allows you to configure your system to utilize energ y nservation features as well as power-up/ power-down options. rating system. ptions: S1 (POS) (default) Power on Suspend S u s p e n d t o R A M r system wakes up from the S3 suspend function. field pe” is set to “ S1(POS)”. ent Minimum power [...]

PX875P PRO/ PX875P 41 2. Max. Saving Maximum power management (onl y avail able for sl CPUs ). Suspend Mode = 1 minute HDD Power Down = 1 minute cept for HDD Power cludes a “disable” option. modes, the “HDD Power Down” value and the Options: V/H SYNC+Blank This selection will cause the syst em to turn off the vertical and horizont al synchr[...]

PX875P PRO/ PX875P 42 HDD Power Down When enabled, the hard disk drive will power d own after a certain configurabl e period of system inactivity. A ll other devices rem ain active. Options: Disabled (default) 、 1 Min 、 2 Min 、 3 Min 、 4 Min 、 5 Min 、 6 Min 、 7 Min 、 8 Min 、 9 Min 、 10 Min 、 11 Min 、 12 Min 、 13 Min 、 14[...]

PX875P PRO/ PX875P 43 T ime (hh: mm: ss) Alarm Y ot up. This fiel d is only configurab le w “En ed”. imer Event s** W C de de: Pr [A led ou can choose the hour, minute and second th e system will bo hen “RTC Wake Up” is se t t o abl **Reload Global T hen a system goes into suspend mode, certain de vices must be inactive for a period of time[...]

PX875P PRO/ PX875P 44 Hardware Monitor arning to “Enabled” and the case had been previousl y opened, the system will m will not show alert messages when you power on your mputer even if the case h ad been previously opened. erature rature is lower then the PUFAN temperature that you chosen and the CP UFAN will slowdown. ult) 、 30 o C / 86 o F[...]

PX875P PRO/ PX875P 45 L oad System Default Settings oad System Default Settings. oad System T urbo Settings oad System Turbo Settings. oad CMOS From BIOS oad defaults from flash ROM f or systems without batteries. ave CMOS T o BIOS ave defaults to flash ROM for s ystems without batteries. oad Default s L L L L L L S S[...]

PX875P PRO/ PX875P 46 Exit Menu Save & Exit Setup Save all configuration ch anges to CMOS (memory) and exit setu p. A confirmation messa ge will be displayed before proceeding. Exit Without Saving Abandon all changes made during the current session and exit set up. A confirmation message will be displayed before proceeding.[...]

PX875P PRO/ PX875P 47 Chapter 3: Software Setup Sof tware List OM drive and th e Installation Utility will auto -run. You can also unch the Driver CD Insta llation Utility m anually b y executing the Int el.exe program loc ated on the river CD. (For more details, pl ease refer to the Read me.txt f iles that in each fo lder of the Driver .) uttons. [...]

PX875P PRO/ PX875P 48 2. On the next screen, click the drivers that you want to install. (If you click the “Yukon V6.31 Lan Driver”, it will displa y the installation steps, plea se follow the description to complete the installation.) 3. If you click the “Intel USB 2.0 Driver” from the screen in step 2, it will display th e screen as left.[...]

PX875P PRO/ PX875P 49 Chapter 4: Troubleshooting r supply does not turn on. 2. Defective power cable. 3. Power supply failur 4. Faulty wall ou se blown. olutions 1. Ma 2. Rep 3.Contact tech 4.Use different ircuit breaker o roblem 2: ystem inoperative on, power active but stem seems “hung he slot on the mainboard. Proble System does no e hard disk[...]

PX875P PRO/ PX875P 50 Problem 4: ystem only boots from the CD-ROM. The hard disk can be read and applicat ions can b e used but ooting from the hard disk is impossible. Causes: Hard Disk boot sector has been corrupted Solutions: Back up data and app lications files. R rmat the hard drive. Re- i nstall applications and data using backup disks. Probl[...]

PX875P PRO/ PX875P 51 Problem 10: Keyboa rd fail u re. auses: Keyboard is disconnected. olutions: Reconnect keyboard. Re place keyboard if you continue to experience pr oblems. to another system. If no color appears, replace monitor. plays “C: driv e failure.” drive cable. annot boot the s ystem after installing a second hard drive. t compatibl[...]

PX875P PRO/ PX875P 52 Appendix I: Over Clocking Import ant efore you attempt to overclock your s ystem, we strongly recommend that you obtain a thorough derstanding of all of the var iables, procedures, B a nd the potential risks associated with overclocking. ecause we cannot con trol of all of the pos sible variables that exist (i.e. mem ory, AGP [...]

PX875P PRO/ PX875P 53 How to configure your new frequencies. u must enter the BIOS Setup Utilit y in order to begin configuring overclocking ur system, press th e “Del” key when prompted to enter the BI OS overclocking will be found in the “A dvanced ” screen as p art of the tion. BIOS Setup Utility Overclocking V ariables The following ite[...]

PX875P PRO/ PX875P 54 AGP/PCI/SRC Speed Setting the AGP, PCI and SR C frequencies (s peed settings). You can set these S options. One of the options available to you is “Auto, Auto, late these This item deter mines frequencies using the supplied BIO Auto”. Using the “Auto, Auto, Auto” option wi ll instruct the s ystem to automati cally calc[...]

PX875P PRO/ PX875P 55 T esting Even though you have configured your overclocki ng options and have successfull y booted to your , it doesn’t mean that you have succe ssfully overclocked your system. Testing is an n, it is not within th e scope of this document to can find additiona l information on the W eb. e the most impor tant aspects of over [...]

PX875P PRO/ PX875P 56 Example: This example sho ws you how to overclock the CPU Int ernal Clock, DD R frequency and FSB frequency for an Intel bas ed mainboar d. Note that the option s that are supplied with yo ur version of the BIOS may vary slightly. The example is for reference only. Given : Mainboar d: Intel based mainboard CPU: Pentium 4 (1.73[...]

PX875P PRO/ PX875P 57 Appendix II: Super 5.1 Channel Setup 1. After into the s ystem, click the audio icon from the Windows screen. 2. Click Speaker Configuration button, you can see the s creen like the picture below. 3. You can choice 2, 4 or 6 channels by your speakers. Super 5.1 Channel Audio Effect This mainboa es with an hich dio effects. Wit[...]

PX875P PRO/ PX875P 58 Appendix III: Inst alling a Windows ® OS to the SA T A HDD Please refer to the step s below to install a windo ® ws OS to the SA T A HDD A Port1 Mode” option is ou need to s et either Port0 or ce has been ® OS. 1. Make sure that the “On-Chip Serial ATA” option is set to “ Combined Mode ” in the BIOS Setup Utility.[...]