Intel GA-EQ45M-S2 Bedienungsanleitung

GA-EQ45M-S2 LGA775 socket motherboard for Intel ® Core TM processor family/ Intel ® Pentium ® processor family/Intel ® Celeron ® processor family User's Manual Rev. 1001 12ME-EQ45MS2-1001R[...]

Nov. 5, 2008 Motherboard GA-EQ45M-S2 Motherboard Nov. 5, 2008 GA-EQ45M-S2[...]

Copyright © 2008 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE with[...]

- 4 - T able of Contents Box Contents ................................................................................................................. 6 Optional Items ................................................................................................................. 6 GA-EQ45M-S2 Motherboard Layout ..................................[...]

- 5 - Chapter 3 Drivers Installation ...................................................................................... 59 3 - 1 Installing Chipset Drivers ............................................................................... 5 9 3 -2 Application Software ................................................................................[...]

- 6 - • The box contents above are for reference only and the actual items shall depend on product package you obtain. The box contents are subject to change without notice. • The motherboard image is for reference only. Box Contents GA-EQ45M-S2 motherboard Motherboard driver disk User's Manual One IDE cable and one floppy disk drive cable[...]

- 7 - GA-EQ45M-S2 Motherboard Layout KB_MS LGA775 ATX GA-EQ45M-S2 USB LAN F_AUDIO AUDIO IT8720 IDE DDR2_1 ATX_12V_2X R_USB CPU_FAN Intel ® Q45 MFG PHASE LED Intel ® ICH10DO 1_BIOS CD_IN PCI1 BAT Intel 82567LM PCI2 SYS_FAN DVI SPDIF_I DEBUG PORT FDD F_USB2 F_USB1 CODEC SPDIF_O DDR2_2 DDR2_3 DDR2_4 CLR_CMOS PCIEX4 F_PANEL VGA 2_BIOS PCIEX1 COMA IT8[...]

- 8 - Block Diagram BIOS CPU CLK+/- (333/266/200 MHz) LGA775 Processor Intel ® Q45 LPC BUS Line-Out MIC CODEC Line-In SPDIF In SPDIF Out Side Speaker Out Center/Subwoofer Speaker Out Surround Speaker Out PCI Bus Floppy Host Interface PCI Express Bus GMCH CLK (333/266/200 MHz) PS/2 KB/ Mouse IT8720 Intel ® ICH10DO 1 PCI Express x1 PCIe CLK (100 MH[...]

Hardware Installation - 9 - 1 - 1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's manual and follow these procedures: • Prior to installation, do not remove or break mo[...]

GA-EQ45M-S2 Motherboard - 1 0 - 1 - 2 Product Specifications CPU  Support for an Intel ® Core TM 2 Extreme processor/ Intel ® Core TM 2 Quad processor/Intel ® Core TM 2 Duo processor/ Intel ® Pentium ® Dual-Core processo/Intel ® Celeron ® processor in the LGA 775 package (Go to GIGABYTE's website for the latest CPU support list.) [...]

Hardware Installation - 11 - Internal Connectors  1 x 24-pin A TX main power connector  1 x 8-pin A TX 12V power connector  1 x floppy disk drive connector  1 x IDE connector  6 x SA T A 3Gb/s connectors  1 x CPU fan header  1 x system fan header  1 x front panel header  1 x front panel audio header  1 x CD In connecto[...]

GA-EQ45M-S2 Motherboard - 1 2 - BIOS  2 x 8 Mbit flash  Use of licensed AWARD BIOS  PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b Unique Features  Support for @BIOS  Support for Q-Flash  Support for Virtual Dual BIOS  Support for Download Center  Support for Xpress Install  Support for Xpress Recovery2  Support for Dynamic[...]

Hardware Installation - 13 - Notch Notch Alignment Key Alignment Key LGA 775 CPU LGA775 CPU Socket Pin One Corner of the CPU Socket Triangle Pin One Marking on the CPU 1 -3 Installing the CPU and CPU Cooler Read the following guidelines before you begin to install the CPU: • Make sure that the motherboard supports the CPU. (Go to GIGABYTE's [...]

GA-EQ45M-S2 Motherboard - 1 4 - B . Follow the steps below to correctly install the CPU into the motherboard CPU socket. Before installing the CPU, make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the CPU. Step 1: Completely raise the CPU socket lever. CPU Socket Lever Step 3: Remove the protec[...]

Hardware Installation - 15 - 1-3-2 Installing the CPU Cooler Follow the steps below to correctly install the CPU cooler on the motherboard. (The following procedure uses Intel ® boxed cooler as the example cooler.) Step 1: Apply an even and thin layer of thermal grease on the surface of the installed CPU. Step 2: Before installing the cooler, note[...]

GA-EQ45M-S2 Motherboard - 1 6 - 1 -4 Installing the Memory Read the following guidelines before you begin to install the memory: • Make sure that the motherboard supports the memory. It is recommended that memory of the same capacity, brand, speed, and chips be used. (Go to GIGABYTE's website for the latest memory support list.) • Always t[...]

Hardware Installation - 17 - 1-4-2 Installing a Memory Notch DDR2 DIMM Before installing a memory module , make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the memory module. DDR2 DIMMs are not compatible to DDR DIMMs. Be sure to install DDR2 DIMMs on this motherboard. Step 1: Note the orientat[...]

GA-EQ45M-S2 Motherboard - 1 8 - 1 - 5 Installing an Expansion Card Read the following guidelines before you begin to install an expansion card: • Make sure the motherboard supports the expansion card. Carefully read the manual that came with your expansion card. • Always turn off the computer and unplug the power cord from the power outlet befo[...]

Hardware Installation - 19 - PCI Express x4 Graphics Card Support List The items below are supported under Windows Vista operating system only. When using an add-on graphics card, please first delete the onboard graphics driver before installing the driver for the add-on graphics card. (Continued...) Graphics Chip Maker Model Name A TI Radeon X1900[...]

GA-EQ45M-S2 Motherboard - 2 0 - Graphics Chip Maker Model Name NVIDIA GeForce 6500 GIGABYTE GV-NX65128DE NVIDIA GeForce 7100 GS GIGABYTE GV-NX71G512P8-RH NVIDIA GeForce 7200 GS GIGABYTE GV-NX72G128D NVIDIA GeForce 7300 GS GIGABYTE GV-NX73G128D-RH NVIDIA GeForce 7300 GT GIGABYTE GV-NX73T256D-RH NVIDIA GeForce 7300 LE GIGABYTE GV-NX73L128D-RH NVIDIA [...]

Hardware Installation - 21 - 1 -6 Back Panel Connectors PS/2 Keyboard and PS/2 Mouse Port Use the upper port (green) to connect a PS/2 mouse and the lower port (purple) to connect a PS/2 keyboard. Parallel Port Use the parallel port to connect devices such as a printer, scanner and etc. The parallel port is also called a printer port. D-Sub Port Th[...]

GA-EQ45M-S2 Motherboard - 2 2 - In addition to the default speakers settings, the ~ audio jacks can be reconfigured to perform different functions via the audio software. Only microphones still MUST be con- nected to the default Mic in jack ( ). Refer to the instructions on setting up a 2/4/5.1/ 7.1-channel audio configuration in Chapter 5, "C[...]

Hardware Installation - 23 - 1 -7 Internal Connectors Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. • Before installing the devices, be sure to turn off the devices and your computer. Unplug the power cord from the power outlet to prevent d[...]

GA-EQ45M-S2 Motherboard - 2 4 - ATX: Pin No. Definition 13 3.3V 14 -12V 15 GND 1 6 PS_ON(soft On/Off) 17 GND 18 GND 19 GND 20 -5V 21 +5V 22 +5V 2 3 +5V (Only for 2x12-pin A TX) 24 GND (Only for 2x12-pin A TX) Pin No. Definition 1 3.3V 2 3.3V 3 GND 4 +5V 5 GND 6 +5V 7 GND 8 Power Good 9 5V SB(stand by +5V) 10 +12V 1 1 +12V (Only for 2x12-pin A TX) 1[...]

Hardware Installation - 25 - 3/4) CPU_F AN/SYS_F AN (Fan Headers) The motherboard has a 4-pin CPU fan header and a 4-pin system fan header (CPU_FAN/ SYS_FAN). Most fan headers possess a foolproof insertion design. When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is the ground wire). The motherb[...]

GA-EQ45M-S2 Motherboard - 2 6 - 6 ) IDE (IDE Connector) The IDE connector supports up to two IDE devices such as hard drives and optical drives. Before attaching the IDE cable, locate the foolproof groove on the connector. If you wish to connect two IDE devices, remember to set the jumpers and the cabling according to the role of the IDE devices (f[...]

Hardware Installation - 27 - 8 ) PWR_LED (System Power LED Header) This header can be used to connect a system power LED on the chassis to indicate system power status. The LED is on when the system is operating. The LED keeps blinking when the system is in S1 sleep state. The LED is off when the system is in S3/S4 sleep state or powered off (S5). [...]

GA-EQ45M-S2 Motherboard - 2 8 - 1 0 ) F_P ANEL (Front Panel Header) Connect the power switch, reset switch, speaker and system status indicator on the chassis front panel to this header according to the pin assignments below. Note the positive and negative pins before connecting the cables. • PW (Power Switch, Red): Connects to the power switch o[...]

Hardware Installation - 29 - 1 1 ) F_AUDIO (Front Panel Audio Header) The front panel audio header supports Intel H igh D efinition audio (HD) and AC'97 audio. Y ou may connect your chassis front panel audio module to this header. Make sure the wire assignments of the module connector match the pin assignments of the motherboard header. Incorr[...]

GA-EQ45M-S2 Motherboard - 3 0 - 1 3 ) SPDIF_I (S/PDIF In Header, Red) This header supports digital S/PDIF in and can connect to an audio device that supports digital audio out via an optional S/PDIF in cable. For purchasing the optional S/PDIF in cable, please contact the local dealer. Pin No. Definition 1 Power 2 SPDIFI 3 GND Pin No. Definition 1 [...]

Hardware Installation - 31 - 16/17) COMA/COMB (Serial Port Header, White) The COMA/COMB header can provide one serial port via an optional COM port cable. For purchasing the optional COM port cable, please contact the local dealer. Pin No. Definition 1 NDCD- 2 NSIN 3 NSOUT 4 NDTR- 5 GND 6 NDSR- 7 NRTS- 8 NCTS- 9 NRI- 1 0 No Pin 1 5 ) F_USB1/F_USB2/[...]

GA-EQ45M-S2 Motherboard - 3 2 - 1 9 ) CI (Chassis Intrusion Header) This motherboard provides a chassis detection feature that detects if the chassis cover has been removed. This function requires a chassis with chassis intrusion detection design. Pin No. Definition 1 Signal 2 GND 1 8 ) DEBUG PORT (Debug Card Header, Black) The header can connect o[...]

Hardware Installation - 33 - 2 0 ) CLR_CMOS (Clearing CMOS Jumper) Use this jumper to clear the CMOS values (e.g. date information and BIOS configurations) and reset the CMOS values to factory defaults. T o clear the CMOS values, place a jumper cap on the two pins to temporarily short the two pins or use a metal object like a screwdriver to touch t[...]

GA-EQ45M-S2 Motherboard - 3 4 - 2 2 ) PHASE LED The number of lighted LEDs indicates the CPU loading. The higher the CPU loading, the more the number of lighted LEDs. T o enable the Phase LED display function, please first enable Dynamic Energy Saver Advanced. Refer to Chapter 4, "Dynamic Energy Saver Advanced," for more details. 2 3 ) S0[...]

- 3 5 - BIOS Setup Chapter 2 BIOS Setup BIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the motherboard. Its major functions include conducting the Power-On Self-T est (POST) during system startup, saving system parameters and loading operating system, etc. BIOS includes a BIOS Setup program that allows[...]

GA-EQ45M-S2 Motherboard - 3 6 - 2 -1 Startup Screen The following screens may appear when the computer boots. Award Modular BIOS v6.00PG, An Energy Star Ally Copyright (C) 1984-2008, Award Software, Inc. EQ45M-S2 F1h . . . . <DEL>: BIOS Setup/Q-Flash <F9>: XpressRecovery2 <F12>: Boot Menu <End>: Qflash 11/05/2008-Q45-ICH10-7[...]

- 3 7 - BIOS Setup 2 -2 The Main Menu Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use arrow keys to move among the items and press <Enter> to accept or enter a sub-menu. (Sample BIOS V ersion: F1h) CMOS Setup Utility-Copyright (C) 1984-2008 A ward Software  MB Intelligent T weaker(M.I.T.) ?[...]

GA-EQ45M-S2 Motherboard - 3 8 -      The Functions of the <F1 1> and <F12> keys (For the Main Menu Only)  F1 1 : Save CMOS to BIOS This function allows you to save the current BIOS settings to a profile. Y ou can create up to 8 profiles (Profile 1-8) and name each profile. First enter the profile name (to erase the def[...]

- 3 9 - BIOS Setup 2 -3 MB Intelligent T weaker(M.I.T .) (Note) This item appears only if you install a CPU that supports this feature. CMOS Setup Utility-Copyright (C) 1984-2008 A ward Software MB Intelligent T weaker(M.I.T.) Robust Graphics Booster [Auto] CPU Clock Ratio (Note) [10 X] Fine CPU Clock Ratio (Note) [+0.5] CPU Frequency 2.66GHz( 266x[...]

GA-EQ45M-S2 Motherboard - 4 0 - ******** Standard Timing Control ******** (G)MCH Frequency Latch Allows you to fix the chipset frequency at system bootup. Options for adjusting memory multiplier below may differ according to the fixed frequency. Options are: Auto (default), 200MHz, 266MHz, 333MHz. System Memory Multiplier (SPD) Sets memory multipli[...]

- 4 1 - BIOS Setup tWR Options are: Auto (default), 1~31. tRFC Options are: Auto (default), 1~255. tRTP Options are: Auto (default), 1~15. Command Rate(CMD) Options are: Auto (default), 1~3.[...]

GA-EQ45M-S2 Motherboard - 4 2 - 2 - 4 Standard CMOS Features Date Sets the system date. The date format is week (read-only), month, date and year. Select the desired field and use the up arrow or down arrow key to set the date. Time Sets the system time. For example, 1 p.m. is 13:0:0. Select the desired field and use the up arrow or down arrow key [...]

- 4 3 - BIOS Setup • Auto Lets BIOS automatically detect IDE/SA T A devices during the POST . (Default) • None If no IDE/SA T A devices are used, set this item to None so the system will skip the detection of the device during the POST for faster system startup. • Manual Allows you to manually enter the specifications of the hard drive when t[...]

GA-EQ45M-S2 Motherboard - 4 4 - 2 -5 Advanced BIOS Features Hard Disk Boot Priority Specifies the sequence of loading the operating system from the installed hard drives. Use the up or down arrow key to select a hard drive, then press the plus key <+> (or <PageUp>) or the minus key <-> (or <PageDown>) to move it up or down o[...]

- 4 5 - BIOS Setup First/Second/Third Boot Device Specifies the boot order from the available devices. Use the up or down arrow key to select a device and press <Enter> to accept. Options are: Floppy, LS120, Hard Disk, CDROM, ZIP, USB-FDD, USB-ZIP, USB-CDROM, USB-HDD, Legacy LAN, Disabled. Password Check Specifies whether a password is requir[...]

GA-EQ45M-S2 Motherboard - 4 6 - CPU EIST Function (Note) Enables or disables Enhanced Intel SpeedStep T echnology (EIST). Depending on CPU loading, Intel ® EIST technology can dynamically and effectively lower the CPU voltage and core frequency to decrease average power consumption and heat production. (Default: Enabled) Virtualization T echnology[...]

- 4 7 - BIOS Setup 2 - 6 Integrated Peripherals SA T A RAID/AHCI Mode (Intel ICH10DO Southbridge) Enables or disables RAID for the SA T A controllers integrated in the Intel ICH10DO Southbridge or configures the SA T A controllers to AHCI mode. Disabled Disables RAID for the SA T A controllers and configures the SAT A controllers to P A T A mode. ([...]

GA-EQ45M-S2 Motherboard - 4 8 - USB Mouse Support Allows USB mouse to be used in MS-DOS. (Default: Disabled) Legacy USB storage detect Determines whether to detect USB storage devices, including USB flash drives and USB hard drives during the POST. (Default: Enabled) Azalia Codec Enables or disables the onboard audio function. (Default: Auto) If yo[...]

- 4 9 - BIOS Setup 2 -7 Power Management Setup CMOS Setup Utility-Copyright (C) 1984-2008 A ward Software Power Ma nage ment Setup ACPI Suspend T ype [S3(STR)] ACPI LED Control [Enabled] Soft-Off by PW R-BTT N [Insta nt-Off] PME Event W ake Up [Enabled] Power On by Ring [Enabled] Resume by Alarm [Disabled] x Date (of Month) Alarm Everyday x Time (h[...]

GA-EQ45M-S2 Motherboard - 5 0 - Power On by Ring Allows the system to be awakened from an ACPI sleep state by a wake-up signal from a modem that supports wake-up function. (Default: Enabled) Resume by Alarm Determines whether to power on the system at a desired time. (Default: Disabled) If enabled, set the date and time as following: Date (of Month[...]

- 5 1 - BIOS Setup 2 -8 PnP/PCI Configurations PCI1 IRQ Assignment Auto BIOS auto-assigns IRQ to the first PCI slot. (Default) 3,4,5,7,9,10,1 1,12,14,15 Assigns IRQ 3,4,5,7,9,10,1 1,12,14,15 to the first PCI slot. PCI2 IRQ Assignment Auto BIOS auto-assigns IRQ to the second PCI slot. (Default) 3,4,5,7,9,10,1 1,12,14,15 Assigns IRQ 3,4,5,7,9,10,1 1,[...]

GA-EQ45M-S2 Motherboard - 5 2 - 2 - 9 PC Health Status Reset Case Open Status Keeps or clears the record of previous chassis intrusion status. Enabled clears the record of previous chassis intrusion status and the Case Opened field will show "No" at next boot. (Default: Disabled) Case Opened Displays the detection status of the chassis in[...]

- 5 3 - BIOS Setup Smart F AN Control Method (Note) Specifies how to control CPU fan speed. Auto Lets BIOS control CPU fan speed. (Default) Intel(R) QST Allows CPU fan speed to be controlled by the Intel Quiet System T echnology (QST). This feature requires the installation of Intel Host Embedded Control Interface (HECI) driver from the motherboard[...]

GA-EQ45M-S2 Motherboard - 5 4 - 2-10 Load Fail-Safe Defaults Press <Enter> on this item and then press the <Y> key to load the safest BIOS default settings. In case system instability occurs, you may try to load Fail-Safe defaults, which are the safest and most stable BIOS settings for the motherboard. 2 - 1 1 Load Optimized Defaults Pr[...]

- 5 5 - BIOS Setup 2-12 Set Supervisor/User Password Press <Enter> on this item and type the password with up to 8 characters and then press <Enter>. Y ou will be requested to confirm the password. Type the password again and press <Enter>. The BIOS Setup program allows you to specify two separate passwords: Supervisor Password Wh[...]

GA-EQ45M-S2 Motherboard - 5 6 - 2-13 Save & Exit Setup 2-14 Exit Without Saving Press <Enter> on this item and press the <Y> key. This saves the changes to the CMOS and exits the BIOS Setup program. Press <N> or <Esc> to return to the BIOS Setup Main Menu. Press <Enter> on this item and press the <Y> key. Thi[...]

- 5 7 - BIOS Setup 2-15 Security Chip Configuration L T/TXT Initialization Enables or disables Intel T rusted Execution T echnology (Intel TXT). Intel Trusted Execution T echnology provides a hardware-based security foundation. By isolating assigned memory through this hardware-based protection, it allows the system to protect data in each virtual [...]

GA-EQ45M-S2 Motherboard - 5 8 -[...]

Drivers Installation - 59 - Chapter 3 Drivers Installation 3 - 1 Installing Chipset Drivers • Before installing the drivers, first install the operating system. (The following instructions use Windows XP as the example operating system.) • After installing the operating system, insert the motherboard driver disk into your optical drive. The dri[...]

GA-EQ45M-S2 Motherboard - 6 0 - 3 -2 Application Software This page displays all the utilities and applications that GIGABYTE develops and some free software. Y ou can click the Install button on the right of an item to install it. 3 - 3 T echnical Manuals This page provides GIGABYTE's application guides, content descriptions for this driver d[...]

Drivers Installation - 61 - 3-4 Contact Click the URL on this page to link to the GIGABYTE Web site. Or read the last page of this manual to check the contact information for GIGABYTE T aiwan headquarter or worldwide branch offices. 3- 5 System This page provides the basic system information.[...]

GA-EQ45M-S2 Motherboard - 6 2 - 3- 6 Download Center T o update the BIOS, drivers, or applications, click the Download Center button to link to the GIGABYTE Web site. The latest version of the BIOS, drivers, or applications will be displayed.[...]

Unique Features - 63 - Chapter 4 Unique Features 4- 1 Xpress Recovery2 " *" Xpress Recovery2 checks the first physical hard drive in the following sequence: The first P A T A IDE connector , the second P AT A IDE connector, the first SA TA connector, the second SA TA connector and so forth. For example, when hard drives are attached to th[...]

GA-EQ45M-S2 Motherboard - 6 4 - Step 3: When partitioning your hard drive, make sure to leave unallocated space (10 GB or more is recommended; actual size requirements vary, depending on the amount of data) and begin the installation of the operating system. Step 4: After the operating system is installed, right- click the Computer icon on your des[...]

Unique Features - 65 - E. Removing the Backup D. Using the Restore Function in Xpress Recovery2 F. Exiting Xpress Recovery2 Select REBOOT to exit Xpress Recovery2. Select RESTORE to restore the backup to your hard drive in case the system breaks down. The RESTORE option will not be present if no backup is created before. Step 1: If you wish to remo[...]

GA-EQ45M-S2 Motherboard - 6 6 - 4-2-1 Updating the BIOS with the Q-Flash Utility A. Before Y ou Begin: 1 . From GIGABYTE's website, download the latest compressed BIOS update file that matches your motherboard model. 2. Extract the file and save the new BIOS file (e.g. EQ45MS2.F1) to your floppy disk, USB flash drive, or hard drive. Note: The [...]

Unique Features - 67 - B. Updating the BIOS When updating the BIOS, choose the location where the BIOS file is saved. The follow procedure assumes that you save the BIOS file to a floppy disk. Step 1: 1. Insert the floppy disk containing the BIOS file into the floppy disk drive. In the main menu of Q-Flash, use the up or down arrow key to select Up[...]

GA-EQ45M-S2 Motherboard - 6 8 - Step 6: Select Save & Exit Setup and then press <Y> to save settings to CMOS and exit BIOS Setup. The procedure is complete after the system restarts. Press <Y> to load BIOS defaults Step 4: Press <Esc> and then <Enter> to exit Q-Flash and reboot the system. As the system boots, you should[...]

Unique Features - 69 - 4-2-2 Updating the BIOS with the @BIOS Utility A. Before Y ou Begin: 1 . In Windows, close all applications and TSR (T erminate and Stay Resident) programs. This helps prevent unexpected failures when performing a BIOS update. 2 . During the BIOS update process, ensure the Internet connection is stable and do NOT interrupt th[...]

GA-EQ45M-S2 Motherboard - 7 0 - 4 - 3 Dynamic Energy Saver Advanced GIGABYTE Dynamic Energy Saver Advanced (Note 1) is a revolutionary technology that delivers unpar- alleled power savings with a click of the button. Featuring an advanced proprietary hardware and software design, GIGABYTE Dynamic Energy Saver Advanced is able to provide exceptional[...]

Unique Features - 71 - T otal Mode - Button Information T able B. T otal Mode In T otal Mode, users are able to see how much total power savings they have accumulated in a set period of time since activating Dynamic Energy Saver Advanced for the first time (Note 4) . (Note 1) Before using the DES function, make sure the CPU Enhanced Halt (C1E) and [...]

GA-EQ45M-S2 Motherboard - 7 2 - 4 - 4 Ultra TPM GIGABYTE's unique Ultra TPM (Trusted Platform Module) features the industry's most advanced hardware- based data encryption design. With the easy-to-use Ultra TPM user interface, users can store/back up their TPM keys on a USB flash drive or in the system BIOS. The TPM key(s) will be removed[...]

Unique Features - 73 - 4- 5 Q-Share Q-Share is an easy and convenient data sharing tool. After configuring your LAN connection settings and Q-Share, you are able to share your data with computers on the same network, making full use of Internet resources. Directions for using Q-Share After installing Q-Share from the motherboard driver disk, go to [...]

GA-EQ45M-S2 Motherboard - 7 4 - 4 -6 Time Repair Based on the Microsoft Volume Shadow Copy Services technology, Time Repair allows you to quickly back up and restore your system data in the Windows Vista operating system. Time Repair supports NTFS file system and can restore system data on P A T A and SA T A hard drives. System Restore Choose a sys[...]

Appendix - 75 - (Note 1) Skip this step if you do not want to create RAID array on the SA TA controller . (Note 2) Required when the SA T A controller is set to AHCI or RAID mode. Chapter 5 Appendix 5 - 1 Configuring SA T A Hard Drive(s) T o configure SA T A hard drive(s), follow the steps below: A . Install SA T A hard drive(s) in your computer . [...]

GA-EQ45M-S2 Motherboard - 76 - B. Configuring SA T A controller mode in BIOS Setup Make sure to configure the SA T A controller mode correctly in system BIOS Setup . Step 1: T urn on your computer and press <Delete> to enter BIOS Setup during the POST (Power-On Self-T est). T o create RAID, set SA T A RAID/AHCI Mode under the Integrated Perip[...]

Appendix - 77 - C. Configuring a RAID array in RAID BIOS Enter the RAID BIOS setup utility to configure a RAID array. Skip this step and proceed to the installation of Windows operating system for a non-RAID configuration. Step 1: After the POST memory test begins and before the operating system boot begins, look for a message which says "Pres[...]

GA-EQ45M-S2 Motherboard - 78 - Step 3: After entering the CREA TE VOLUME MENU screen, enter a volume name with 1~16 letters (letters cannot be special characters) under the Name item and press <Enter>. Then, select a RAID level (Figure 4). There are four RAID levels supported: RAID 0, RAID 1, RAID 10 and RAID 5 (the selections available depen[...]

Appendix - 79 - Step 5: Enter the array capacity and press <Enter>. Finally press <Enter> on the Create V olume item to begin creating the RAID array. When prompted to confirm whether to create this volume, press <Y> to confirm or <N> to cancel (Figure 6). Figure 6 Intel(R) Matrix Storage M a nager option ROM v8.5.0.1030 ICH[...]

GA-EQ45M-S2 Motherboard - 80 - Delete RAID V olume T o delete a RAID array , select Delete RAID V olume in MAIN MENU and press <Enter>. In the DELETE VOLUME MENU section, use the up or down arrow key to select the array to be deleted and press <Delete>. When prompted to confirm your selection (Figure 8), press <Y> to confirm or &l[...]

Appendix - 81 - (Note) For users without a startup disk: Use an alternative system and insert the motherboard driver disk. From your optical drive folder, double click the MENU.exe file in the BootDrv folder (Figure 3). A command prompt window will open similar to that in Figure 2. Figure 3 5-1-2 Making a SA T A RAID/AHCI Driver Diskette (Required [...]

GA-EQ45M-S2 Motherboard - 82 - Figure 1 Step 2: Then a controller menu similar to Figure 2 below will appear. Select Intel(R) ICH8R/ICH9R/ICH10R/ DO SA T A RAID Controller and press <Enter>. On the next screen, press <Enter> to continue the driver installation. After the driver installation, you can proceed with the Windows XP installat[...]

Appendix - 83 - B. Installing Windows Vista (The procedure below assumes that only one RAID array exists in your system.) Step 1: Restart your system to boot from the Windows Vista setup disk and perform standard OS installation steps. When a screen similar to that below appears, select Load Driver . (Figure 3). Step 2: Specify the location where t[...]

GA-EQ45M-S2 Motherboard - 84 - Figure 10 Step 3: When a screen as shown in Figure 10 appears, select Intel(R) ICH8R/ICH9R/ICH10R SA T A RAID Controller and press Next . Step 4: After the driver is loaded, select the RAID/AHCI drive(s) where you want to install the operating system and then press Next to continue the OS installation (Figure 1 1). Fi[...]

Appendix - 85 - Rebuilding an Array: Rebuilding is the process of restoring data to a hard drive from other drives in the array. Rebuilding applies only to fault-tolerant arrays such as RAID 1, RAID 10, or RAID 5 arrays. The procedures below assume a new drive is added to replace a failed drive to rebuild a RAID 1 array. Intel ICH10DO SA T A contro[...]

GA-EQ45M-S2 Motherboard - 86 - Step 1: On the View menu of the Intel Matrix Storage Console, select Advanced Mode for a more detailed view of the storage device information. Step 2: The new hard drive appears under Non-RAID Hard Drive . Right-click on the new hard drive and select Rebuild to this Hard Drive . Step 3: Click Next when the Rebuild RAI[...]

Appendix - 87 - 5 -2 Configuring Audio Input and Output 5-2-1 Configuring 2/4/5.1/7.1-Channel Audio The motherboard provides six audio jacks on the back panel which support 2/4/5.1/7.1-channel audio. The picture to the right shows the default audio jack assignments. The integrated HD (High Definition) audio provides jack retasking capability that a[...]

GA-EQ45M-S2 Motherboard - 88 - Step 3: On the Speakers screen, click the Speaker Configu- ration tab. In the Speaker Configuration list, select Stereo , Quadraphonic , 5.1 Speaker , or 7.1 Speaker according to the type of speaker configuration you wish to set up. Then the speaker setup is completed. Step 2: Connect an audio device to an audio jack.[...]

Appendix - 89 - 5-2-2 Configuring S/PDIF In/Out A. S/PDIF In: The S/PDIF in cable (optional) allows you to input digital audio signals to the computer for audio processing. 1. Installing the S/PDIF In Cable: 2. Configuring S/PDIF In: On the Digital Input screen, click the Default Format tab to select the default format. Click OK to complete. Step 1[...]

GA-EQ45M-S2 Motherboard - 90 - B. S/PDIF Out: The S/PDIF out jacks can transmit audio signals to an external decoder for decoding to get the best audio quality. 1. Conneting a S/PDIF Out Cable 2. Configuring S/PDIF Out: On the Digital Output screen, click the Default Format tab and then select the sample rate and bit depth. Click OK to complete. Co[...]

Appendix - 91 - 5-2-3 C onfiguring Microphone Recording Step 1: After installing the audio driver, the HD Audio Manager icon will appear in the notification area. Double- click the icon to access the HD Audio Manager . Step 2: Connect your microphone to the Mic in jack (pink) on the back panel or the Mic in jack (pink) on the front panel. Then conf[...]

GA-EQ45M-S2 Motherboard - 92 - Step 5: After completing the settings above, click Start , point to Programs , point to Accessories , and then click Sound Recorder to begin the sound recording. Step 4: T o raise the recording and playback volume for the microphone, click the Microphone Boost icon on the right of the Recording V olume slider and set [...]

Appendix - 93 - Step 4: Now you can access the HD Audio Manager to configure Stereo Mix and use Sound Recorder to record the sound. Step 3: When the Stereo Mix item appears, right-click on this item and select Enable . Then set it as the default device. A. Recording Sound: 1 . Make sure you have connected the sound input device (e.g. microphone) to[...]

GA-EQ45M-S2 Motherboard - 94 - 5 - 3 T roubleshooting 5-3-1 Frequently Asked Questions T o read more F AQs for your motherboard, please go to the SupportMotherboardF AQ page on GIGABYTE's website. Q : In the BIOS Setup program, why are some BIOS options missing? A : Some advanced options are hidden in the BIOS Setup program. Press <Delete[...]

Appendix - 95 - 5-3-2 T roubleshooting Procedure If you encounter any troubles during system startup, follow the troubleshooting procedure below to solve the problem. Turn off the power. Remove all peripherals, connecting cables, and power cord etc. The problem is verified and solved. Ye s No A Check if the CPU cooler is attached to the CPU securel[...]

GA-EQ45M-S2 Motherboard - 96 - If the procedure above is unable to solve your problem, contact the place of purchase or local dealer for help. Or go to the SupportT echnical Service Zone page to submit your question. Our customer service staff will reply you as soon as possible. No Ye s Check if there is display on your monitor. Ye s When the comp[...]

Appendix - 97 - 5- 4 Regulatory Statements Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose. Contravention will be prosecuted. We believe that the information contained herein was accurate in all respects at th[...]

GA-EQ45M-S2 Motherboard - 98 - Finally, we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of this product (where applicable), recycling the inner and outer packaging (including shipping containers) this product was delivered in, and by disposing of or recycling used batteries p[...]

Appendix - 99 -[...]

GA-EQ45M-S2 Motherboard - 100 -[...]

Appendix - 101 -[...]

GA-EQ45M-S2 Motherboard - 102 -[...]

Appendix - 103 - Contact Us      GIGA-BYTE TECHNOLOGY CO., L TD. Address: No.6, Bau Chiang Road, Hsin-Tien, T aipei 231, T aiwan TEL: +886-2-8912-4000 FAX: +886-2-8912-4003 T ech. and Non-T ech. Support (Sales/Marketing) : http://ggts.gigabyte.com.tw WEB address (English): http://www.gigabyte.com.tw WEB address (Chinese): http://www.[...]

GA-EQ45M-S2 Motherboard - 104 - T o submit a technical or non-technical (Sales/ Marketing) question, please link to : http://ggts.gigabyte.com.tw Then select your language to enter the system.      GIGABYTE Global Service System      G.B.T. TECHNOLOGY TRADING GMBH - Germany WEB address : http://www.gigabyte.de   [...]