HP (Hewlett-Packard) workstation Bedienungsanleitung

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152

Zur Seite of

Richtige Gebrauchsanleitung

Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung HP (Hewlett-Packard) workstation an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von HP (Hewlett-Packard) workstation, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.

Was ist eine Gebrauchsanleitung?

Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung HP (Hewlett-Packard) workstation die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.

Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung HP (Hewlett-Packard) workstation. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.

Was sollte also eine ideale Gebrauchsanleitung beinhalten?

Die Gebrauchsanleitung HP (Hewlett-Packard) workstation sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts HP (Hewlett-Packard) workstation
- Den Namen des Produzenten und das Produktionsjahr des Geräts HP (Hewlett-Packard) workstation
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts HP (Hewlett-Packard) workstation
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen

Warum lesen wir keine Gebrauchsanleitungen?

Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von HP (Hewlett-Packard) workstation zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von HP (Hewlett-Packard) workstation und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service HP (Hewlett-Packard) finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von HP (Hewlett-Packard) workstation zu überspringen, wie es bei der Papierform passiert.

Warum sollte man Gebrauchsanleitungen lesen?

In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts HP (Hewlett-Packard) workstation, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.

Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von HP (Hewlett-Packard) workstation widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.

Inhaltsverzeichnis der Gebrauchsanleitungen

  • Seite 1

    Model 748 W orkstation Owner ’ s Guide This guide contains install ation instructi ons HP Part No. A451 1-9060 7 Ed itio n E11 99 Printed in U.S.A.[...]

  • Seite 2

     Hewlett- Packard Co. 1996, 1997 , 1999 Printi ng History First Pr inting: December 1996 Latest Printing: November 1999 UNIX is a r egistere d trademar k of The Open Gr oup. NOTICE The infor mation contai ned in th is docu ment is subjec t to chang e withou t notice. HEWLETT - P ACKARD MAKES NO W ARRANTY OF ANY KIND WITH REGARD TO THIS MA TERIAL[...]

  • Seite 3

    Contents iii Pre face Audience xii Release Document(s) xii Related Manual s xii Revi sion Histo ry xii i Documentati on Conven tions xiv Questions, S uggestions , or Prob lems xv 1 Pro duct Desc ription The Model 748 Ruggedized W o rkstation 1-3 Features 1-5 Model 748 P hysical Dimens ions and P ower Requi rements 1-6 Board Co mputer Co nfigurat io[...]

  • Seite 4

    iv Contents Installing VME Accessory Card Hardware 3-6 Installatio n Proce dures 3-6 For More Information 3-7 4 EISA Card Inst allatio n EISA Accessory Card Configuration Files 4-3 Hardware Installation 4-4 T ools Re quire d 4-4 Procedure 4 -4 5 PC I C ard Insta ll ati on Hardware Installation 5-3 6 Install ing and Confi guring Mas s S torage Devic[...]

  • Seite 5

    Contents v 7 Using Mass S torage Devi ces Using your CD-ROM Drive 7-2 CD-ROM Driv e and CD-ROM Medi a Descriptions 7-3 CD-ROM Drive 7-3 CD-ROM Media 7-4 Operating the CD-ROM Drive 7-6 Loading an d Unloading a CD-ROM in the Disc Tray 7-6 V e rifying the CD-ROM Driv e Operation 7 -9 Mountin g and Un moun tin g a CD-R OM Dis c 7- 1 1 Mounting a CD-ROM[...]

  • Seite 6

    vi Contents Using th e Floppy Diskett e 7-28 Setting the W rite-Protect T ab on a Disk ette 7-28 Inserti ng and Removi ng a D iskett e 7-2 9 Operatin g the Fl oppy Dri ve 7-30 V erifying the F loppy Dri ve Configu ration 7-30 Using D evice F iles 7-30 Formattin g a New Diskette 7-31 T ransferring Data T o and From a F lopp y Diskette 7 -31 Saving F[...]

  • Seite 7

    Contents vii Dealing wit h Netwo rk Failur es 10-1 1 A Safety an d Regulatory S tatements Declaration of Conformity A-3 Special V ideo Configuration S tatements A-4 For EN55 022 or C ISPR 22 Applic a tio ns : A-4 For FCC Applications: A-4 Emissi ons Regu lations A-5 Federal Communications Commission (FCC) A-5 VCCI Class A ITE A-5 A-5 Emissions R eg[...]

  • Seite 8

    viii Contents Figur es Model 748 F ront View 1-3 Model 748 R ear View 1-4 Boar d C omput er Fro nt Pane l 1-4 Model 74 4 Memory Sl ots 2- 4 Installing a VME Card 3-6 Removing the EISA Tray 4-5 Card Reta in er Screw 4- 6 Sliding the EISA Module Back into the VMEbus Chassi s 4-7 Remo vi ng the P CI Mod ule 5- 4 Card Retainer Captive Screw 5-5 Removi [...]

  • Seite 9

    Contents ix Ta b l e s Conver si ons to Sta n dard Cab ling 1-7 Model 744/ 132L Memory C ard Cu rrent Usage Work sheet 2-5 Model 744/ 165L Memory C ard Cu rrent Usage Work sheet 2-5 Model 744 C urrent Req uirements Work sheet 2-7 Model 743 C urrent Req uirements Work sheet 2-8 Internal Device Current R equirements 2-9 Upper Power Supply Current B u[...]

  • Seite 10

    x Contents[...]

  • Seite 11

    xi Preface[...]

  • Seite 12

    xii This owner’ s guide describ es how to inst all and us e the Mode l 748 wor ksta- tion. Audience This gui de is int ended f or Model 748 wor kstat ion us ers. Release Documen t(s) Pleas e refe r t o the Release Document (s) y ou receiv ed with your syste m or system software for a dditional info rmatio n that we m ay not have been ab le to inc[...]

  • Seite 13

    xiii Revision History The revi sion hi story fo r each edition o f the ma nual is l isted bel ow: HP Part No. Edition Revision His tory A4500- 906 01 E0996 First pri nt i ng . A4505-906 01 E0297 Updated with P CI info rmation A451 1 -90604 A451 1 -90607 E0897 E1 199 Updated wit h 744/16 5L infor ma- tion, and new removab le media information Update[...]

  • Seite 14

    xiv Documentatio n Conventions Unless ot herwis e noted in the t ext, this guide u ses th e followi ng symboli c conventi ons. user -sup plied val ues Italic words or characte rs in for- mats and command descr iptions represen t valu es tha t you must supply . sample user inp ut In examples, i nf ormat ion tha t t he user ente rs appe ars in co lor[...]

  • Seite 15

    xv Questions, Sug gestions, or Problems If you have a ny que stions, suggesti ons, o r probl ems with our hardware, soft- ware, or d ocumenta tion, plea se contac t the HP Response Center fo r your country .[...]

  • Seite 16

    xvi[...]

  • Seite 17

    1-1 1 Product Description[...]

  • Seite 18

    1-2 Produc t Description This chap ter i ntroduces the Mode l 748 wor kstation . Its p urpose is to famil- iari ze you w i th the work st atio n featu res, contr ols, a nd in dicat ors. The maj or sec tions wi thin this ch apter ar e: •F e a t u r e s • Model 74 8 Physical Dimensi ons and P ower Require ments • Board Computer Co nfigurat ions[...]

  • Seite 19

    1-3 Produc t Descr iption The Model 748 Ruggedized Workstation The Model 748 Rugge dized Workstati on The Model 748 rugged ized workst atio n provides a VMEbus car d cage for a wide vari ety of VME and PCI or EISA cards. In combinat ion with the Model 743 or Model 744 board comput er as the system con troller , the Model 748 is excepti onall y flex[...]

  • Seite 20

    1-4 Produc t Description The Model 748 Ruggedized Workstation Figure 1-2 Model 748 Rear View Figur e 1-3 Board C om puter F ront Pa nel Removabl e Medi a Device s (rear faci ng)[...]

  • Seite 21

    1-5 Produc t Descr iption Features Features The Model 748 has th e followi ng gener al feat ures: • Two-slot 6U VME config uration f or th e proce ssor and i ts optio ns • Six av ailable 6U VME slots for us er insta lled devices • Inp u t/Out put (pro cess or depe ndent) : On-B o ard g raphi cs RS-232C (2) AUI (LAN) PMC option ca rds (thr oug[...]

  • Seite 22

    1-6 Produc t Description Model 748 Phys ical Dimensions and Power Requirements Model 748 Physical Dimensions an d Power Requirements • Height: 323.8 5 mm (12.75 in.) • Width: 425 .45 mm (16.75 in.) • Depth: 41 9.1 mm (16.5 in.) • Power: fu lly loade d, 90 A @120V ac NOTE: Power requ irements d epend on the RAM, graphics, an d SCSI hardwar e[...]

  • Seite 23

    1-7 Produc t Descr iption Board Computer Configurations Board Computer Configurations Memory , interface, graph ics, and operati ng system configurat ions depend on the proc essor you select ed when o rdering y our Model 748. Ple ase refe r to the ow ner ’ s guide fo r your pro cessor for memory configur atio n detail s. Conversion Cables The hig[...]

  • Seite 24

    1-8 Produc t Description Conversion Cables[...]

  • Seite 25

    2-1 2 Power Budget[...]

  • Seite 26

    2-2 Power B udget This chap ter di scusses the power budgetin g for t he Model 748 works tation.[...]

  • Seite 27

    2-3 Power B udget Power Budgeting Power Budgeting If your workstati on’ s applic ation requires sever al acc essory car ds and mass storage devices, powe r budgeti ng may be r equired. Power budgeti ng ensures that t he po wer nee ded for t he fol lowing inter nal d evices doe s not exceed the power avail abl e: • Mass st orage devices • Mode[...]

  • Seite 28

    2-4 Power B udget Power Budgeting ory ba nk s . • The 16, 64, 12 8, and 256 M B cards ea ch hav e only on e memory ba nk th at is acti ve at any one time. The worst case power draw is when your system has two 32MB cards in slots 2 and 3 (these banks would be cons idered active, all o ther memory c ards/b anks wou ld be consider ed inactive). Th e[...]

  • Seite 29

    2-5 Power B udget Power Budgeting T able 2-1 Model 744/1 32L Memory Card Cur r ent Usage W orksheet Memor y Card Size First Active Bank 1 Second Active Bank Third Active Bank Inactive Banks To t a l s (+5 V) 32 MB 2 1.15 A 1. 15 A 1.15 A 0.05 A x ___ __ _______ 64 MB 2. 6 A N/A N/A 0.1 A x __ _ _______ __ 128 MB 1.45A N/A N/A 0 .07 A x ___ _______ [...]

  • Seite 30

    2-6 Power B udget Power Budgeting 3 Write in th e board computer ’s concurr ent requiremen ts in the lin e provid- ed for VM E slots 1 a nd 2 in the Lower Power Supply Works heet ( Table 2-7). 4 Determine each de vice’s c urrent require ments from t he Int ernal Devi ce Requir ements ta ble and the VME access ory ca rd’s s pecif ications shee[...]

  • Seite 31

    2-7 Power B udget Power Budgeting T abl e 2-3 M o del 7 44 Cur rent Req u iremen t s W orkshee t Each Mo del 744 Bo ard C omputer +5V dc Amps +12V dc Amps -12V dc Amps If 13 2 MHz , cu rrent for +5 V dc is 4.7A 1 If 16 5 MHz , cu rrent for +5 V dc is 6.3A _____ _ 0 .1A 0. 1A RAM car ds (see T able 2 -1 or T able 2-2) _______ _ Graphics sub syst ems[...]

  • Seite 32

    2-8 Power B udget Power Budgeting T abl e 2-4 M o del 7 43 Cur rent Req u iremen t s W orkshee t Each Mo del 743 Bo ard C omputer +5V dc Amps +12V dc Amps -12V dc Amps If 64 MHz, current fo r +5V dc is 6.1A 1 If 10 0 MHz , cu rrent for +5 V dc is 7.5A 0 .1A 0.1A RAM c ards x 0 .2A eac h = Graphics sub syst ems 2 x 0.7A eac h = FWD SCSI GS C card x [...]

  • Seite 33

    2-9 Power B udget Power Budgeting T able 2-5 summari zes the c urrent require ments for the in terna l devices . T able 2-5 Inte rnal Device Curr ent Requir emen ts Device +5.1V dc Amps +12V dc Amps -12V dc Amps Internal m ass storag e devices: CD-ROM drive 1.6 A 1.8 A DDS tape d rive 1.0 A 0.8 A Flexible disk driv e 0.8 A 1 GB SE h ard driv e 1.2 [...]

  • Seite 34

    2-10 Power B udget Power Budgeting CAUTION: If you upg rade your Mode l 748 rugge dized wo rkstation, a dding more: RAM cards, mas s storag e devices, GSC, VME, EISA, P CI, or PMC ac cessory cards, you must recompute the power budget to en sure the new configu ration will be within the avail able c urrent e ach power supply ca n provi de. T able 2-[...]

  • Seite 35

    2-11 Power B udget Power Budgeting NOTE: The PCI tray provid es power for option cards from both a +5 Vdc source and a +3.3 Vdc source. Car ds may use either or both po wer sources, u p to 25W per sl ot. However , the +3.3 V dc sou rce is limited to 39 .8 W combined for slots 1 an d 2, an d 39.8 W combined for slot s 3 an d 4. Fo r example, if the [...]

  • Seite 36

    2-12 Power B udget Power Budgeting T able 2-7 Lower Power Suppl y Curr ent Budgetin g W orksheet Loca tion Devic e +5V dc Amps +12V dc Amps -12V dc Amps -5.2V dc Amps Mass Storage Device 1 Mass Storage Device 2 Mass Storage Device 3 Mass Storage Device 4 VME Slot 2 and VME Slot 1 Mode l 743/7 44 Board Co mp u t e r _____ __ E I S A / P C I S l o t [...]

  • Seite 37

    3-1 3 VME Card Installation[...]

  • Seite 38

    3-2 VME C ard Installatio n This chap ter de scribes insta lling a VME ca rd int o the Mode l 748 wor ksta- tion. The maj or sec tions wi thin this ch apter ar e: • VME Overview • VME I nstal lation Outl in e • Installi ng VME Accessor y Card Hardwar e[...]

  • Seite 39

    3-3 VME Ca rd Installatio n VME Ov erv iew VME Overview VME (V ersa Module Eurocar d) card s use a VME bus prot ocol whic h allows various kinds of mi croproces sors to c ommunicat e with one a nother . The protocol is micro proces sor in dependent, implement s a reli able mech anical standar d, and all ows independ ent vendor s to build compatibl [...]

  • Seite 40

    3-4 VME C ard Installatio n VME Ov erview 9.05 VME Confi guration an d Driver Dev elopment Gui de (Par t Numb er A2636 90020) . Document ation for creat ing th ese driv ers fo r HP-UX 10.x is contain ed in t he VME Serv ices f or HP-UX 10 (Part Number A4412 90021) . CAUTION: If you need t o remove th e VME tray module from the cardc age, the PCI or[...]

  • Seite 41

    3-5 VME Ca rd Installatio n VME In st allation Outline VME Instal latio n Outlin e VMEbus physic al slot n umbers are: 1 to 8 • The sy stem cont roll er boa rd comput er (Mode l 743/7 44) occ upies t he bot - tom two slots (s lots 1 and 2). • Slots 3 th rough 8 are t he accessi ble slots in the VME module. The se slots are number ed on the ba c[...]

  • Seite 42

    3-6 VME C ard Installatio n Installing VME Accessory Card Ha rdware Installing VME Accessory Card Hardware Y ou’ll need these too ls to access th e VME cards : • Small flat-t ipped scr ewdriver • Medium f lat-ti pped screwdr iver • Sta tic-fr ee work spac e Installation Procedures CAUTION: When removi ng the VME mod ule, the PCI/EI SA modul[...]

  • Seite 43

    3-7 VME Ca rd Installatio n Installing VME Accessory C ard Hardware 4 Refer to your VME card inst allati on manual , and then set any hardware configur atio ns that may be requ ired for your ap plicati on. 5 Slide t he VME acces sory c ard in to the sl ot, and t hen tight en it s screws. 6 Plug in t he power cords, and then turn on yo ur works tati[...]

  • Seite 44

    3-8 VME C ard Installatio n Installing VME Accessory Card Ha rdware[...]

  • Seite 45

    4-1 4 EISA Card Installation[...]

  • Seite 46

    4-2 EISA Car d Installation This chap ter de scribes insta lling an EISA card in the Mo del 748 worksta - tion. The maj or sec tions wi thin this ch apter ar e: • EISA Acce ssory Card Configu ration Fi les • Hardware I nstal lation[...]

  • Seite 47

    4-3 EISA Ca rd Installatio n EISA Accessory Ca rd Configuration Files EISA Accessory Card Configuration File s Four EISA sl ots are availabl e in the Mode l 748. The man page eisa_con fig (1M) ha s curren t inf ormation on inst alling your EI SA card(s) on HP-UX using t he eis a_config utilit y . The co nfig urati on for E ISA car ds is de term ine[...]

  • Seite 48

    4-4 EISA Car d Installation Hardware Installation Hardware Installation Tools Required Y ou’ll need the foll owing it ems to access the EISA car ds in the Model 748 • Medium f lat-ti pped screwdr iver . • Sta tic-fr ee work area . Procedure 1 Stop any a pplic ation prog rams, an d then s hut down y our workst ation. 2 Turn the workstati on of[...]

  • Seite 49

    4-5 EISA Ca rd Installatio n Hardware Installation Figu r e 4-1 Removi ng the E ISA Tr ay 5 Note that t he slots are numbe red from 1 t o 4. Cards fo r slo ts 1 a nd 2 ar e ins tall ed compone nt side down; ca rds f or slots 3 and 4 ar e inst alled compo nent s ide up. Loosen the card r etainer capti ve screw (s ee Figure 4- 2) for the appro priat [...]

  • Seite 50

    4-6 EISA Car d Installation Hardware Installation Figure 4-2 Card Retainer Screw 6 Remove the s lot cover pl ate by pulling i t out of t he EISA module . 7 Refer t o your EISA ca rd inst allati on manual , and t hen set any confi gura- tions t hat may be requi red for your app lication. 8 Instal l th e EISA c ard i n the s lot. Make sur e it s conn[...]

  • Seite 51

    4-7 EISA Ca rd Installatio n Hardware Installation Figure 4-3 Sliding the EISA Modul e Back into the VMEbus Chassis 11 Plug in the powe r cord, and the n turn on th e powe r for the VMEbus ch as- sis and boot th e operati ng syst em. 12 Verify the install ation by r unning the Support Tool s Manage r, as de- scribe d in your board comput er’s own[...]

  • Seite 52

    4-8 EISA Car d Installation Hardware Installation[...]

  • Seite 53

    5-1 5 PCI Card Installation[...]

  • Seite 54

    5-2 PCI C ard Inst al lat ion This chap ter de scribes insta lling a PCI card in the Mod el 748 works tation’ s PCI tray . The PCI tr ay acco mmodates u p to fou r user instal led PCI c ards. The PCI cards mus t be stand ard +5 Vd c bus si gnallin g cards . Y our system must be runn ing versio n 10.20 or la ter of t he HP- UX op era ti ng system.[...]

  • Seite 55

    5-3 PCI Card Installatio n Hardware Installation Hardware Installation 1 Stop any a pplic ation prog rams, th en shut down your work stat ion. 2 Turn the workstati on off, and unplug the power cord( s). WA R N I N G : To avoid electrical shock, make sure you unplug the power cable from the wall outlet and the system unit befor e proceeding any furt[...]

  • Seite 56

    5-4 PCI C ard Inst al lat ion Hardware Installation 3 Usin g a fla t-ti pped sc rewd river , uns crew the ca ptive screws insid e the P CI module hand les f ive to sev en tur ns (until each s crew pops ou t). 4 Grasp the PCI module handles and pull th e PCI module out of the chassi s, as shown i n Figure 5- 1. Figure 5-1 Removing the PCI Mo dule 5 [...]

  • Seite 57

    5-5 PCI Card Installatio n Hardware Installation NOTICES: This PCI tray only supports optio n cards with +5 Vdc bus s ignalling . If your workstation application requires several accessory cards and mass storage devi ces, power bu dgetin g may be required. This ens ures the power needed for these internal devices does not exceed the po wer availabl[...]

  • Seite 58

    5-6 PCI C ard Inst al lat ion Hardware Installation Figure 5-3 Removing the Card Retainer and Slot Cover Plate 6 Remove t he slot cove r plate by pu lling it out o f the PCI mod ule, as shown in Figur e 5-3. 7 Refer t o your PCI car d inst allati on manual , and se t any conf igurat ion switches or ju mpers th at may be require d for yo ur applic a[...]

  • Seite 59

    5-7 PCI Card Installatio n Hardware Installation 8 Instal l the PCI card i n the s lot, as shown in Figure 5 -4. Mak e sure i ts con - nector is compl etely se ated i n the PCI bac kplane . Figure 5-4 Inst alling a PCI Option Card 9 Replace t he PCI c ard reta iner, a nd then ti ghten its scre w[...]

  • Seite 60

    5-8 PCI C ard Inst al lat ion Hardware Installation 10 Slide t he PCI module i nto the VMEbus chassis, as shown in Figure 5 -5, and tigh ten its h andle s crews. Figure 5-5 Installing the PCI Module in to the VMEbu s Chass is 11 Plug in the powe r cord, and the n turn on th e powe r for the VMEbus ch as- sis and boot th e operati ng syst em. 12 Log[...]

  • Seite 61

    5-9 PCI Card Installatio n Hardware Installation 15 From t he Dri vers m enu , sele c t GSCtoPCI Driver. 16 Go to the Actions menu and sel ect Cre ate a New Kernel. 17 When the new k ernel is built, SAM as ks if you wan t to move th e kerne l into pl ace and re boot. Choose Ye s. The syste m reboot s with the PCI dri ver lo aded. For More Informati[...]

  • Seite 62

    5-10 PCI C ard Inst al lat ion Hardware Installation[...]

  • Seite 63

    6-1 6 Installing a nd Configuri ng Mass Storage Devices[...]

  • Seite 64

    6-2 Installing a nd Configu ring Mass S torage Devices This chap ter de scribes insta lling th e mass stor age dr ives in you r Model 7 48 workstat ion. The maj or sec tions wi thin this ch apter ar e: • Ha rd ware In stalla tion for Driv es • Finding t he Status of Existing SCSI Bus Addr esses • Installi ng Mass Stor age Devices • Confi gu[...]

  • Seite 65

    6-3 Installing and Configu ring Mass S t orage Devic es Hardware Inst allation for Drives Hardware Installation for Drives The foll owing pr oducts ar e suppor ted for ma ss sto rage in t he Model 7 48i. The mass st orage module can ho ld up t o four d rives . All produc ts in clude instal lation h ardware for e ither a 3 .5-in. o r 5.25- in. mass [...]

  • Seite 66

    6-4 Installing a nd Configu ring Mass S torage Devices Hardware Inst allation for Drives Module Orientations The Model 74 8i uses t wo mass storage module holds u p to four single-ende d SCSI devic es. Removable med ia driv es can be fitt ed to be ac cessi ble from ei ther th e front or the r ear of t he Model 74 8 chass is. See Fig ure 6- 1 for s [...]

  • Seite 67

    6-5 Installing and Configu ring Mass S t orage Devic es Finding the St atus of Existing SCSI Bus Addresses Finding the Status of Existing SCSI Bus Addresses Before yo u instal l a new SCSI dr ive, to en sure that the SCSI bus address o f your devic e is curre ntly unused , you can use SAM, or you can use the ioscan tool t o help det ermine whic h d[...]

  • Seite 68

    6-6 Installing a nd Configu ring Mass S torage Devices Installing Mass Storage Devices Installing Mass Storag e Devices Removing t he Mas s Storag e Modu le 1 Determine what SCSI bus addres ses are in use by f ollowing the procedu re in the previ ous s ecti on . Be su re t o w rite d own th is info rma tion. 2 Shut down yo ur system by typing shutd[...]

  • Seite 69

    6-7 Installing and Configu ring Mass S t orage Devic es Installing Mass Storage Device s Installing a Device in the Mass Storage Module 1 Remove the n ew device f rom its sh ipping box 2 Ensure t hat th e hardware SCSI bus a ddress selecte d on the device is not alre a dy us ed by t he sys t em. 3 In the ca se of a r emova ble media de vic e (f le [...]

  • Seite 70

    6-8 Installing a nd Configu ring Mass S torage Devices Installing Mass Storage Devices Figure 6- 2 Device I nstallat ion in the Mas s Storage Modul e 8 Tighten t he mounting screws. 9 Replace t he ind ividual SCS I and powe r connect ors. 10 Replace the mass-s torage modul e in the Mode l 748i . 11 Tighten the ca ptive scr ews for the mas s storage[...]

  • Seite 71

    6-9 Installing and Configu ring Mass S t orage Devic es Installing Mass Storage Device s 15 Press 6 follow ed by Enter to look at the HARDWARE INFORMATION scr een. 16 Ensure t hat th e new device is li sted in HARDWARE INFORMATION .[...]

  • Seite 72

    6-10 Installing a nd Configu ring Mass S torage Devices Configuring for a Hard Disk D rive Configuring for a Hard Disk Drive Hard disk drive u pgrades can be inst alle d to acc ommodate l ocal f ile sy stems and swap sp ace on your worksta tion. Software Installation of the Hard Disk Drive Upgrade After ha rdware install ation has been co mple ted,[...]

  • Seite 73

    6-11 Installing and Configu ring Mass S t orage Devic es Configuring for a Hard Disk Drive NOTE: SAM does not s upport the fo llowing: • Changing t he hardware a ddress of a disk drive containi ng the root f ile system. • Changing t he har dware addre ss of a disk a rray. • Changing t he har dware addre ss of a disk t hat is pa rt of sof twar[...]

  • Seite 74

    6-12 Installing a nd Configu ring Mass S torage Devices Configuring for a Hard Disk D rive moved, t he drivers need ed for a hard disk s hould current ly be in the ker nel.) You will be given an informatio n screen suggesting t hings to try if th e device still cannot be fou n d. If this is the case, you will need to consult th e man ual Peripheral[...]

  • Seite 75

    6-1 3 Installing and Configu ring Mass S t orage Devic es Configuring for a Hard Disk Drive SCSI describe of /dev/rdsk/c201d5s 0 vendor: Quantum product id: XXXXXXX type: direct access size: 200000 Kbytes bytes per sector: 512 After moun ting a new d isk on a di rectory , an ll listi ng of the direc tory should gi ve you a t least one file or dir e[...]

  • Seite 76

    6-14 Installing a nd Configu ring Mass S torage Devices Configuring for a Hard Disk D rive[...]

  • Seite 77

    7-1 7 Using Mass Storage Devices[...]

  • Seite 78

    7-2 Using Ma ss S torage Devic es Using your CD-ROM Drive Using your C D-ROM Drive This sect ion des cribe s how to us e your CD-ROM dri ve. It is d ivided into t he followi ng subse ctions: • CD-ROM drive an d CD-ROM media descr iptions • Operati ng the CD-ROM Drive • Mounting an d unmounting a CD-ROM disc • T roub leshoo ting NOTE: Be sur[...]

  • Seite 79

    7-3 Using Mas s S torage Devices CD-ROM Drive a nd CD-ROM Media D escriptions CD-ROM Drive and CD-ROM Media Descripti ons This sec tion de scribes basic inf ormati on need ed for usi ng the CD-ROM drive a nd CD-ROM discs. CD-ROM Drive The CD-ROM drive is a rand om access re ad-only mas s storage device t hat uses re movable CD-ROM disc s. The driv [...]

  • Seite 80

    7-4 Using Ma ss S torage Devic es CD-ROM Drive and CD-ROM M edia Descriptions NOTE: The Volume Cont rol, Hea dset Ja ck, and Audi o Jack f eatures of the CD-ROM drive a re supp orted thr ough app licatio ns only . CD-ROM Media CD-ROM discs ar e 120 mm (4 .7 in.) in d iameter , and use one dat a surfac e with a ca pacity of approx imately 60 0 megab[...]

  • Seite 81

    7-5 Using Mas s S torage Devices CD-ROM Drive a nd CD-ROM Media D escriptions CAUTION: Handle CD-ROM di scs by the edges only . Always be sur e a CD-ROM disc is eith er i n the CD -ROM driv e or it s pro tectiv e cas e whe n not in use . This w ill lessen the chance of exp osing t he disc s urface to dust. O ver ti me, dust reduces the re liabi lit[...]

  • Seite 82

    7-6 Using Ma ss S torage Devic es Oper ati ng t he CD -RO M Dr ive Operating th e CD-ROM Drive This sec tion desc ribes how t o perform t asks with your CD-ROM dri ve. Loading and Unload ing a CD-ROM in the Disc Tray This subs ection de scribes how to lo ad or unloa d a CD-ROM disc i n the CD- ROM drive. Disc T ray Descri ption This CD-ROM is d esi[...]

  • Seite 83

    7-7 Using Mas s S torage Devices Operating the CD-ROM Drive Loading a CD-ROM Disc This CD- ROM drive h as an au tomatic l oading/ ejecti ng featur e. T o load a disc in the CD-ROM dr ive, fo llow th ese steps : Figure 7-3 Placing a CD-ROM Disc in a Drive 1 Check that the works tation is po wered on. 2 T o open the dis c tray , press and release the[...]

  • Seite 84

    7-8 Using Ma ss S torage Devic es Oper ati ng t he CD -RO M Dr ive Unloading a CD-ROM Disc Perform t he fol lowing ste ps to u nload a disc fro m the CD-ROM drive: Figure 7-4 Removing a CD-ROM Disc From a Drive 1 Press the eject button to eject the disc tray from the drive. I f the drive is in use, you must press the eject bu tton for more than one[...]

  • Seite 85

    7-9 Using Mas s S torage Devices Operating the CD-ROM Drive Verifying the CD-ROM Driv e Operation T o verify that yo ur works tation can c ommunicate wi th the CD-ROM drive, follow t hese s teps: 1 In a terminal window, enter th e following command: /etc/ iosca n -d sdi sk Enter (For HP-UX 9.x) /usr/sb in/io scan -d s disk Ent er (For HP- UX 10.x) [...]

  • Seite 86

    7-10 Using Ma ss S torage Devic es Oper ati ng t he CD -RO M Dr ive If ios can do es no t see y our C D -ROM drive it retu rns th e foll owin g mes- sage: ioscan: No hardware found If you r eceive th is message , go to Cha pter 10, “De aling W ith Problems.”[...]

  • Seite 87

    7-1 1 Using Mas s S torage Devices Mounting and Unmounting a CD-ROM Disc Mounting and Unmounting a CD-ROM Disc T o access informat ion on a CD-ROM disc, you mus t first mount the d isc. This app lies to f ile syst em inf ormation only . If you wis h to l oad a music CD, for exampl e, you wou ld not nee d to mount th e disc. Mo unting a di sc with f[...]

  • Seite 88

    7-12 Using Ma ss S torage Devic es Mounting and Unmounting a CD-ROM Disc The syste m respon ses you receiv e depend on the re lease of HP-UX. 4 The System Admi nistrat ion Manager window open s. Double- click on Peripheral Devices -> . 5 The Perip heral Devi ces win dow opens. Double- click on Disks and File Systems -> . 6 The Disk s and Fi l[...]

  • Seite 89

    7-1 3 Using Mas s S torage Devices Mounting and Unmounting a CD-ROM Disc Unmounting a C D-ROM Disc Using SA M Use the f ollowing pr ocedure t o unmount a CD-ROM disc: NOTE: Before y ou un mount a CD-ROM disc, ma ke s ur e t hat yo ur wo rki ng direc tory (the d irecto ry in wh ich a rela tive p ath na me search begin s) is se t to some direct ory o[...]

  • Seite 90

    7-14 Using Ma ss S torage Devic es Mounting and Unmounting a CD-ROM Disc 8 Press t he eject button on t he CD-ROM drive a nd remove the CD-ROM disc fr om the di sc tray . Reading the Busy Ligh t The CD-ROM busy l ight s hows the st atus of the dri ve duri ng the sel f tes t and duri ng acti vity wit h the ho st syste m. The CD-ROM drive performs th[...]

  • Seite 91

    7-1 5 Using Mas s S torage Devices DDS T ape Drive and Data Cassette Descriptions DDS Tape Drive and Data Cassette Descriptions This sec tion de scribes how to us e the opti onal Di gital Dat a S torag e (DDS) tape dr ive. It also des cribe s how to ma intain an d care for th e drive. This chap ter pr ovides i nformat ion on t he follo wing: • DD[...]

  • Seite 92

    7-16 Using Ma ss S torage Devic es DDS T ape Drive and Data Cassette Descriptions S torage Capacities The maximum st orage capa cities of dif ferent DDS drive s with and wi thout data compr ession are s hown in T a ble 7-2 and T able 7-3. Contr ols and Indi cators Figure 7- 5 shows the LEDs and e ject b utton of t he DDS-f ormat tape drives . T abl[...]

  • Seite 93

    7-1 7 Using Mas s S torage Devices DDS T ape Drive and Data Cassette Descriptions Figure 7-5 Tape Drive Controls and Indicators LEDs This sec tion de scribes the LED co des that a re displ ayed. The two LEDs on the f ront pa nel s o f the DDS d ri ves in dicat e di f fere nt activ - ities or proble ms that occur . Figure 7- 6 lists the LED c odes a[...]

  • Seite 94

    7-18 Using Ma ss S torage Devic es DDS T ape Drive and Data Cassette Descriptions LED W arning Conditions The foll owing se ctions de scrib e actions to ta ke if the LEDs indi cate a war n- ing condi tion. High Hu midity If the LED s displ ay the high hu midity signa l, the hu midity i s too high . The driv e does not perfo rm any opera tions until[...]

  • Seite 95

    7-1 9 Using Mas s S torage Devices DDS T ape Drive and Data Cassette Descriptions If the LED indicato rs on yo ur DDS-fo rmat dr ive displ ay the Media W ear (Cautio n) condi tion, follow th is pro cedure : 1 Check the sys tem conso le for any ta pe erro r messages. A har d error during a read or write ope rati on may hav e occurre d. 2 Clean the h[...]

  • Seite 96

    7-20 Using Ma ss S torage Devic es DDS T ape Drive and Data Cassette Descriptions Cleaning the T ape Heads Clean the he ads of your ta pe drive af ter every 25 hours of tape drive use or if the Media W ear (Cauti on) signa l is dis played on the LE D. NOTE: Only use HP Cle ani ng Ca ssett es ( HP922 83K) to c lea n th e tape h ead s. Do no t use sw[...]

  • Seite 97

    7-2 1 Using Mas s S torage Devices DDS T ape Drive and Data Cassette Descriptions Figure 7-7 Setting the Write-Protect Tab on a DDS Tape T o protect in format ion on a dat a cass ette fr om being o verwritt en, set th e write- protect t ab to the write -protect posit ion, as sh own in Fi gure 7- 7. NOTE: The write -protect tab shoul d always be in [...]

  • Seite 98

    7-22 Using Ma ss S torage Devic es Operating the DDS T ape Drive Operating th e DDS Tape Drive This sec tion desc ribes how t o perform t asks with your DDS ta pe drive. Loading and Unload ing a Data Cassette Follow th ese st eps to loa d and unl oad a d ata casse tte fro m the DDS tape drive: 1 Insert the data cassette into th e drive, as shown in[...]

  • Seite 99

    7-2 3 Using Mas s S torage Devices Operating the DDS T ape Driv e Verifying the DDS Tape Drive Ope ration T o verify that your works ta ti on ca n communi cate with the DDS- fo rmat ta pe drive, e nter t he fol lowing : /usr/s bin/io scan -d stape (for HP- UX 10.x) /etc/ ioscan -d stape (for HP -UX 9.x) Afte r a few mo ments t he ios ca n util ity [...]

  • Seite 100

    7-24 Using Ma ss S torage Devic es Operating the DDS T ape Drive 2 The Syste m Administrat ion Manager window opens. Double-c lick on Peripheral Devices -> . 3 The Perip heral Devi ces win dow opens. Double- click on Tape Drives -> . 4 The T ape Drives windo w opens. 5 In the list of tap e d rives , clic k on th e des ired t ape dr ive to sel[...]

  • Seite 101

    7-2 5 Using Mas s S torage Devices Operating the DDS T ape Driv e Restoring Files from a Data Cassette to Your System Use the f ollowi ng instru ction s to rest ore fi les fro m a data cassette to your system: 1 Load th e data cass et te into the ta p e driv e. 2 In a termi nal window , use cd to change to the direc tory you want the fi les to res [...]

  • Seite 102

    7-26 Using Ma ss S torage Devic es Operating the DDS T ape Drive Y ou may also communica te with t he tape dr ive with t he cpio, ft io, mt, a nd fbackup co mmands. For more in form ation o n these c ommands, ent er the f ol- lowing in a t erminal window: man command Enter[...]

  • Seite 103

    7-2 7 Using Mas s S torage Devices Ordering Information Ordering Inf ormation T o order Hewlet t-Packard data c assette s and cl eaning ca ssett es for us e in your DDS tap e drive, us e the fol lowing orde r numbers: • HP92283A - Box o f five 60-met er DDS dat a casset tes • HP92283B - Box o f five 90-met er DDS dat a casset tes • HP92300A -[...]

  • Seite 104

    7-28 Using Ma ss S torage Devic es Using the Floppy Diskette Using the Floppy Diskette This sec tion de scribes basic inf ormati on need ed for usi ng your floppy dis - kettes . Setting the Write-Protect Tab on a Diskette Y ou can only s tore or ch ange i nformat ion on a di skette whe n the wri te-p ro- tect ta b is in the w r i te pos itio n . So[...]

  • Seite 105

    7-2 9 Using Mas s S torage Devices Using the Floppy Diskette Inserting and Removing a Diskette Follow th ese st eps to ins ert a nd remove a di sket te from the flopp y disk drive: 1 Insert the diskette into th e drive, as shown in Fig u re 7-10. Figure 7-10 Insertin g and Removi ng a Flo ppy Disk ette 2 Push the d isket te into t he fl oppy dri ve[...]

  • Seite 106

    7-30 Using Ma ss S torage Devic es Operating the Floppy Drive Operating th e Floppy Drive This sec tion desc ribes how t o perform t asks with your 3.5- inch flo ppy disk drive. Verifyin g the Floppy Drive Configu ration T o verify that yo ur works tation can c ommunicate wi th the fl oppy dr ive, use the ios can command to see which devic es are c[...]

  • Seite 107

    7-3 1 Using Mas s S torage Devices Operating the Floppy Drive sam Enter 2 The Syste m Administrat ion Manager window opens. Double-c lick on Disks and File Systems-> . 3 The D i sks an d File Syst ems wi ndow o pens . 4 In the l ist of dr ives, click on the fl oppy dri ve list ing to select i t. 5 From the Act ions menu, c lick on View More Info[...]

  • Seite 108

    7-32 Using Ma ss S torage Devic es Operating the Floppy Drive Y ou need to se t the write prot ect t ab to the write pos ition to tr ansfer da ta to the dis kette . The write- prote ct tab ca n be in either po sition whe n rest oring data fr om a dis kette or list ing the fi les o n a disket te. Saving Files to a Floppy Dis kette Use t he fol lo wi[...]

  • Seite 109

    7-3 3 Using Mas s S torage Devices Operating the Floppy Drive 3 Ente r th e foll owing comman d line : tar -x vf devicef ile pat hname Ente r where devi cefile is th e devic e file a s listed by sam and pat hname i s the pathname o f the f il e o r di re ct ory con taini ng f il es tha t y ou wan t to r est or e from the disket te. If yo u don’ t[...]

  • Seite 110

    7-34 Using Ma ss S torage Devic es Operating the Floppy Drive man cpio Ente r For m ore infor mati on on copyi ng to or fr om D OS fi les, refer to t he ma n pag e by typin g the f ollowi ng in a ter minal wi ndow: man doscp For mo re inf o rmat ion on li st ing the cont ents of DOS dir ec torie s, re fe r to the dosls man page by t yping the follo[...]

  • Seite 111

    7-3 5 Using Mas s S torage Devices Ordering Information Ordering Inf ormation T o order Hewlet t-Packard micro f lexible disket tes for use in your 3.5-i nch floppy di sk driv e, use th e foll owing order number: HP-92192X High-De nsity Micr o Flexible Dis ks (1.44MB Formatted Capacit y) - box of ten dis kette s[...]

  • Seite 112

    7-36 Using Ma ss S torage Devic es Ordering Information[...]

  • Seite 113

    8-1 8 Connecting Cables[...]

  • Seite 114

    8-2 Connectin g Cables For info rmation on co nnecti ng the Mod el 743 or Model 744 b oard compu ter in your Mode l 748 wor kstatio n to any of the followin g connec tions , see the owner ’ s gu ide th at came with your boa rd comput er: • connecti ng a si ngle monit or, mult i-di splay syst em, or text -only termin al • audio con necti on ?[...]

  • Seite 115

    8-3 Connecti ng Cables Figure 8-1 SCSI Connections Single-ended internal connector Fast-wide-differ ential Fast-wide-differential external connector/terminator Single-ended external connector/terminator internal connector (two shown)[...]

  • Seite 116

    8-4 Connectin g Cables[...]

  • Seite 117

    9-1 9 Power-On/Power-Off[...]

  • Seite 118

    9-2 Power-On/Power-O ff Poweri ng On the S ystem Powering On the Syst em Before po wering o n the syst em, ensur e that po wer cord s are connected t o both power suppli es, an d that the power c ords are c onnect ed to sit e power . 1 Switch the p ower switches on both power su pplies to t he 1 (ON) pos ition ( see Figur e 9-1). 2 Push in the powe[...]

  • Seite 119

    9-3 Power-On/ Power-Off Powering On the System Figure 9-2 Card Cage Power Switch Main Card Cage Switch[...]

  • Seite 120

    9-4 Power-On/Power-O ff Poweri ng Off the Sy stem Powering Off the System Before po wering of f the system, you must shutdown t he oper ating syst em. Please ref er to the owner’ s gui de for your boar d comput er or your oper at in g syste m for in struc tions o n shut ting do wn the o pera ti ng sys tem. 1 Once the operating system is shut down[...]

  • Seite 121

    10-1 10 Dealing With Problems[...]

  • Seite 122

    10-2 Dealing W ith Proble ms This chap ter c ontains i nformat ion to help yo u determ ine what’ s wrong with your sys tem when yo u ha ve probl ems. If you hav e a prob lem that i sn’ t l isted in this chapt er , o r if y our proble m persi sts, conta ct your designat ed servi ce repres entative. When c alling f or servi ce, alwa ys have your [...]

  • Seite 123

    10-3 Dealing W ith Probl ems Interpreting the LED Indicators Interpreting the LED Indicators For info rmatio n about the boa rd comput er ’ s LED displays, please refe r to the ow ner ’ s guide sh ipped with your boa rd computer .[...]

  • Seite 124

    10-4 Dealing W ith Proble ms Managing a Boot Failure Managing a Boot Failu re The boot progr am is lo cated in the firmwar e of t he Mo del 743/7 44. Y ou can configur e the behavior o f the boot proce ss by in teracti ng with the boo t con- sole handl er . See the appropri at e owne r’ s gui de fo r you r board co mp ute r f or procedur es to de[...]

  • Seite 125

    10-5 Dealing W ith Probl ems Recovering from a System Panic Recovering from a System Panic A system panic simp ly means that the oper ating s yst em encou ntere d a co ndi- tion th at it di d not know how t o respond t o, so it ha lted your system. System panics ar e rare an d not al ways the r esult of a cata strop he. They sometimes occur a t boo[...]

  • Seite 126

    10-6 Dealing W ith Proble ms Recovering from a System Panic NOTE: It is impor tant to maintain an up-to-date ba ckup of the file s on your system so that, i n the e vent o f a disk h ead cr ash or si milar si tuati on, you can recove r your dat a. How fr equently you upd ate t hese back ups dep ends on how much data you ca n af ford to los e. For d[...]

  • Seite 127

    10-7 Dealing W ith Probl ems Recovering from a System Panic Other pr oblems may res ult from fau lty confi guration of the Mode Configu- ration ar ea of the Bo ot Consol e Handler . If you have boo t problems, check that th e fol lo wing ar eas us e the ir defa u lt valu e s: • Cu rr ent m od e is “US ER” (d efau lt mode). * • FASTBOOT is s[...]

  • Seite 128

    10-8 Dealing W ith Proble ms Recovering from a System Panic If the h ardware failure appear s to be asso ciated wit h a per ipheral, e nsure tha t its c ables ar e tightly connec ted to the ir prop er locat ions and that t he devic e is powered on , and in an “onl ine” stat e. If the re is an error indic ated on the device’ s display: 1 Recor[...]

  • Seite 129

    10-9 Dealing W ith Probl ems Recovering from a System Panic Proceed t o St ep 3, Reboot ing Y our System . Step 2d: Recovering from Other Situations When yo u suspect the pr oblem was something other t han the above (o r when you do not know where to classif y it), pr oceed to S te p 3, Rebooting Y our System . In this ca se , i t is esp eci al ly [...]

  • Seite 130

    10-10 Dealing W ith Proble ms Recovering from a System Panic If the reason your syst em panick ed was becau se of a corrupte d file sy stem, fsck wi ll r eport the erro rs and a ny cor re ction s it ma kes. I f th e proble ms were associa ted with y our root f ile system, f sck will ask y ou to reboo t your s ys- tem when it ’ s finished. When yo[...]

  • Seite 131

    10-11 Dealing W ith Probl ems Dealing with Network Failures Dealing with Network Failures If the progra m you have been run ning uses r esour ces from a l ocal area net- work (L AN) a nd it st ops une xpec te dly , th e foll owing may help locat e the source o f the prob lem: T abl e 10-3 Proble ms wi th th e N etwo r k Problem Action No syst em s [...]

  • Seite 132

    10-12 Dealing W ith Proble ms Dealing with Network Failures[...]

  • Seite 133

    A-1 A Safety an d Regulatory S tatements[...]

  • Seite 134

    A-2 Safety an d Regulatory S tatements This appe ndix co ntains sa fety a nd regula tory s tatements pertaini ng to y our Model 748 wor kstat ion. It provides infor mation on the fol lowing topics: • Declarati on of confo rmity • Special video c onfigura tion sta tements • Emissions regulat ions • Emissions regulat ions co mplianc e • Dat[...]

  • Seite 135

    A-3 Safety an d Regulatory S tatements Declaration of Conformity Declaration of Conform ity[...]

  • Seite 136

    A-4 Safety an d Regulatory S tatements Special Video Configuration St atement s Special Video Configuratio n Statements For EN55022 or CISPR 22 Applications: WA R N I N G : This is a Cla ss A prod uct . I n a do mestic envi ronment th is pro duct may c aus e radio i nterfer ence i n which case the use r may be requi red to take adeq uate measures. [...]

  • Seite 137

    A-5 Safety an d Regulatory S tatements Emissions Regulations Emissions Regula tions Federal Communi cations Commis sion (FCC) This equi pment has be en tested and fou nd to co mply with the limit s for a Cl ass A di gital de vice, p ur- suant t o part 15 of the FCC Ru les and interfe rence causing r egulatio ns of Industr y Can ada . Thes e l imi t[...]

  • Seite 138

    A-6 Safety an d Regulatory S tatements Emissions Regulations C ompliance Emissions Regula tions Compliance Any third -party I /O devi ce instal led in HP s ystem(s ) must be i n accor dance with the re quire men ts set forth in the prec eding Emis sions Reg ulatio ns st ate- ments. In the eve nt tha t a th ird-part y nonco mpliant I/ O devic e is i[...]

  • Seite 139

    A-7 Safety an d Regulatory S tatements Acoustics Acoustics Regulation On Noise Declaration For Machines -3. GSGV Lpa <70dB Lpa<7 0dB operator po sition am Arbei tsplatz normal ope ration normaler Be trieb per ISO 777 9 na ch DIN 45635 T .19[...]

  • Seite 140

    A-8 Safety an d Regulatory S tatements Electrostatic Discha rge (ESD) Pre cautions Electrostati c Discharge (ESD) Precautions Elect rosta ti c charge s can da mage th e inte g rated circu it s on pr inted ci rcuit boards. T o prevent such dama ge from occu rring, obs erve t he following p re- caution s during bo ard unpacki ng, ins tallation , and [...]

  • Seite 141

    A-9 Safety an d Regulatory S tatements Safety Statement Safety Statement This equi pment co nforms to t he fol lowing saf ety st andards: • UL 1950 • CSA 950 • IEC 950 • EN 60950[...]

  • Seite 142

    A-10 Safety an d Regulatory S tatements Laser Safety Statement (U.S.A. Only) Laser Safety Statement (U.S.A. Only) The CD ROM mass- storage system is c ertified a s a Class- 1 laser p roduct under th e U.S. Departmen t of Health an d Human Ser vices (DHHS) Radia- tion Per formanc e S tandard a ccording to the Radiation Control for He alth and Safet [...]

  • Seite 143

    A-1 1 Safety an d Regulatory S tatements W arnings and Cautions Warnin gs and Cautions[...]

  • Seite 144

    A-12 Safety an d Regulatory S tatements W arnings and Cautions[...]

  • Seite 145

    Glossar y-1 Glossary absolute pa th name The name of a file which lists all the directories leading to it, starting w ith root (“/”) and en ding with the file base n ame itself. If the path name indicates a directory, leave th e trailing slash. For example, /us ers/jth/ . See Using HP-UX for m ore in form ation on path names an d director y str[...]

  • Seite 146

    Glossary-2 Glossa ry click To press and release a m ouse b ut- ton rapi dly. cluster A grou p of workst ation s con- nected via a LAN. One co mputer, the ++cluster server++, performs as a file- system server for the <term noglo- ss>cluster client s (For information o n clusters , see <book| Managing Cluste rs of HP 90 00 Co mputers: Shari [...]

  • Seite 147

    Glossa ry Glossar y-3 process can perfor m a requested o pera- tion on the file (such as o pening a file for writing). Access permissions can be changed by the chmod(1 ) command. fileset A logically-defined, named set of files on an update or in stall ation tape. file system The org aniz a tion of file s on a given storag e device, possibly in - cl[...]

  • Seite 148

    Glossary-4 Glossa ry mount directory The director y in an existing file system that is the root direc- tory of a mounted auxi liary file system. multiuser stat e The condition of th e HP-UX operating system in wh ich the cluster n odes (and co nsole) allow co m- munication between the system and all its users. Native Lang uage Supp ort (NLS) A feat[...]

  • Seite 149

    Glossa ry Glossar y-5 root directory T he highest level direc- tory of the hierarch ical file system, from which all other files bran ch. In HP-UX, the slash (/) character refers to the “root directory.” The root directo ry is the only directory in the file system that is its o wn “parent directory.” root file system The file system mounted[...]

  • Seite 150

    Glossary-6 Glossa ry data for a program . The st andard i nput file is often called stdin, and is auto mati- cally opened by the shell fo r reading on file des cripto r 0 for ev ery comm and in- voked. standard o ut put The destination o f outpu t data f r om a pro gram. Standa rd outpu t appea rs on t he dis play unless it is redirected otherwise.[...]

  • Seite 151

    Index Index-1 A acous tics regula tions, A-7 adap te r cables , 1-7 archivi ng data listi ng fi les , , 7-25 restorin g files,, 7-25 savi ng to a cass ette, , 7- 24 archivi ng da ta,, 7-24 B board com pu ter config uration s, 1-7 boot fail ure , 10-4 C cables, 1-7, 8-1 card insta ll a ti on, 3-1, 4-1 cautio ns and warn ings, A-11 CD-ROM disc busy l[...]

  • Seite 152

    Index-2 Index rel ea se do cu me nt s , xi i revision histo ry, xiii S safety laser, A-10 standards, A-9 safet y and regula to ry state m ents, A - 2 SCSI addresse s, 6-5 , 6-1 0 SCSI connec to rs, 8-3 system pan ic , 10-5 T tar com mand, addition al info rmatio n,, 7- 25 V VME, 3-1 VME ca rd install ation, 3-1, 3-6 VME dri ver conf igurati on, 3-4[...]