Hayter Mowers 434F Bedienungsanleitung

(English V ersion) CODE FROM SERIAL NO: P ART NUMBER: 1 1 1-2300 (A) 432F 280000001 433F 280000001 434F 280000001 435F 280000001 ISSUE 23.05.2008 OWNER'S HANDBOOK Motif CODES 432F 433F 434F 435F (Auto Drive) (Push) (Auto Drive) (Push) 111-2300 (A) 23/5/08 2:41 pm Page 1.1[...]

Engine Honda GCV 135 (Codes 432/433/434) GCV 160 (435) Engine type GCV135EA4G7SD (432/433/434) GCV160EA4G7SD (435) Engine/Cutterbar speed 2900 rpm (432/435) 2700rpm (433/434) Fuel type Unleaded petrol Fuel capacity 0.9 litres (432/433/434) , 1.1 litres (435) Oil type SAE 10w-30 engine oil Oil sump capacity 0.55 litres Cutting width 410mm (432) 480m[...]

1st Y ear (12 months) W e certify that this service has been carried out by an Authorised Hayter Service Dealer Date: 1st Y ear (12 months) Owner’s Name: Serial Number: Date: 2nd Y ear (24 months) W e certify that this service has been carried out by an Authorised Hayter Service Dealer Date: Owner’s Name: Serial Number: Date: Note for dealer : [...]

111-2300 (A) 23/5/08 2:41 pm Page 1.4[...]

1.20 Maintenance Schedule 1.20 - Daily 1.20 - 25 Hrs or Every Season 1.20 - 50 Hrs or Every Season 1.20 - 100 Hrs or Every Season 1.21 - 1.27 Mower Maintenance 1.21 - Engine 1.21 - Carbur ettor Adjustments 1.22 - Oil Service 1.22 - Air Cleaner Service 1.23 - Spark Plug Service 1.23 - Keeping Engine Clean 1.23 - Grassbag 1.24 - Deck Housing 1.24 - S[...]

Thank you for purchasing a Hayter mower . The following pages are designed to help you gain safe and efficient service from your machine. IMPOR T ANT : This ‘Owners Handbook’ should be regarded as part of the mower as it gives essential information regarding mower safety , operation, maintenance and specifications. Read and understand this hand[...]

W ARRANTY 1.7 LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of major proprietry components ie. engines, gearbox / transaxle (where applicable) furnish th[...]

SAFETY PRECAUTIONS This safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury . Carefully r ead the following and inform others. Y our mower is perfectly safe if used corr ectly . Failure to observe the following precautions may r esult in serious injury . Before using the mower read[...]

PRECAUTIONS - Always use fresh fuel. Stale fuel can block the carburettor and cause leakage. - Replace fuel tank and oil tank caps securely . - Replace faulty silencer A damaged cutterblade or loose fixing bolt are major hazards. Before use, always visually inspect the cutting mechanism to ensure that it is in good condition. A damaged cutterblade [...]

SAFETY PRECAUTIONS Do not tilt the mower when starting the engine. Do not put hands or feet near or under rotating parts. Never pick up or carry the mower while the engine is running. Never lift the rear deflector while the engine is running. Never touch the exhaust/exhaust guard or cooling fins when the engine is hot. Stop the engine and disconnec[...]

Check the rear deflector and grassbag frequently for wear or deterioration. Replace worn or damaged parts for safety . If the fuel tank has to be drained, this should be done outdoors and when the engine is cool. Refer to ‘Engine Manual’. W ear strong work gloves when removing and reassembling the cutterblade. Always replace worn or faulty part[...]

Remove the mower from the packaging and check that the following items have been supplied correctly . If any items are missing contact, your local Hayter dealer . 1. Engine Handbook. 2. Grassbag T o prevent accidents cut off the long ribbon attached to the grass- bag and discard. Unscrew the handlebar securing knobs sufficiently to allow the handle[...]

T o prevent engine damage the engine is shipped without oil or petrol. The engine must be filled with the correct grade of oil and petrol befor e starting the engine. Always use high quality detergent oil classified SAE 10W -30 Oil. Never use additives with this oil. T o prolong the life of your engine it is important that the oil is changed after [...]

Operate all control levers several times and ensure that the cables move freely . Check that the engine stop and (ground drive clutch levers - Autodrive models ) return freely to their rest position when released. T urn the fuel valve to the on position. Move the throttle control lever to the ‘choke’ position before starting a cold engine. Move[...]

T o make a wide turn steer the mower with the handlebar in the direc- tion required. T o make a tight turn (release the ground drive clutch lever, Autodrive model ), apply downward pressure on the handlebar to raise the front wheels just above ground level and steer in the required direction. T o prevent accidents do not raise the fr ont of the mow[...]

OPERA TING THE MOWER T o prevent accidents thor oughly inspect the area and remove all objects which when contacted by the cutterblade could become dangerous pr ojectiles. Inspect the area for hidden obstructions which when contacted by the cutterblade could risk health and safety or r esult in damage to the mower . Remember the location of these o[...]

OPERA TING When moving the mower across non-grassed areas, stop the engine by releasing the engine stop lever and set the mower to the maximum height of cut to protect the cutting mechanism. 1.17 THE MOWER Non-Grassed Areas 111-2300 (A) 23/5/08 2:41 pm Page 1.17[...]

There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged. Rake the grass thoroughly . Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary . The yearly lawn work programme really starts this month. As soon as the ground conditions are su[...]

Keep mowing regularly and watering as necessary . Fill any cracks caused by drought with a mixture of sharp sand and soil. In dry weath- er conditions leave the grass longer to help retain ground moisture. Raise the height of cut to allow the grass to thicken and protect the roots from the winter frost and snow . Rake out the thatch from the turf a[...]

T o prevent accidents stop the engine disconnect the spark plug lead before attempting to carry out maintenance pr ocedures on the mower . Follow the hourly or calendar intervals, whichever occurs first. More frequent service will be required if working for prolonged periods under dusty , dry conditions, or when airborne debris is present or after [...]

1. Finger Guard 2. Carburettor 3. Spark Plug / Lead 4. Exhaust Guard 5. Exhaust 6. Oil filler Cap/ Dipstick 7. Start Grip 8. Fuel Cap 9. Air cleaner . Should only be made by an authorised Honda dealer . Under no cir- cumstances should the engine be adjusted to run at a speed in excess of that shown on the Declaration of Conformity . 1.21 1 8 7 6 4 [...]

Check the oil level daily before starting the engine and ensure that the correct oil level is maintained. Refer to-‘Before Starting the Mower ’ for oil checking and filling instructions. Change the engine oil after the first 5 hours of operation and thereafter according to the ‘Maintenance Schedule’:- 1. Drain fuel by running the engine unt[...]

Use only an approved spark tester (1) to check for a spark as shown in the diagram. Replace the spark plug every 100 hours or every season, whichever occurs first. A spark plug wrench is available from any authorised Honda service dealer . Check the spark plug gap with a feeler gauge and set at 0.7 - 0.8mm. Remove all grass and debris from the engi[...]

Remove grass debris from the top and underside of the deck housing immediately after use. Fertilisers and top dressings ar e particularly corrosive. Thoroughly clean the mower deck immediately after use on tr eat- ed grass and store well away fr om corrosive materials. Regularly check that all securing nuts and bolts are tight. Replace missing or d[...]

Lubricate the wheels, pivot points and linkages with engine oil every 25 operating hours. Apply a good quality medium grease to the inner control cables at the point of entry and exit from their outer casing. Drain the fuel by running the engine until the fuel tank is empty and the engine stops. Refer to ‘Engine Manual’. Remove the spark plug l[...]

Assemble the cutterblade (1) with the turned up edges facing towards the engine. Secure the cutterblade using the friction washer (2) and new fixing bolt (3) and tighten to a torque of 54Nm. T o prevent accidents never reuse the original fixing bolt. A slightly worn cutterblade may be re-sharpened. Both blade edges must be sharpened equally to ensu[...]

Storage T o store the handlebar unscrew the 2 small securing knobs sufficient- ly to allow it to pivot forwards to rest against the mower . T ake care to ensure that the control cables do not become snagged at the pivot point and depress the engine stop lever to prevent it being damaged through contact with the engine. Engines stored in excess of 3[...]

TROUBLE SHOOTING PROBLEM POSSIBLE F AUL T REMEDY Engine will not turn over Incorrect oil level. Check oil level. Obstruction under deck. Remove obstruction. Engine smokes Excess oil level. Check oil level. Air cleaner cartridge oil Service air cleaner . soaked or blocked. Engine runs then stops Fuel starvation. Fill fuel tank. Fuel valve off. T urn[...]

PROBLEM POSSIBLE F AUL T REMEDY Engine vibrates excessively Mounting bolts loose. T ighten bolts Cutterblade bolt loose. T ighten bolt Cutterblade out of balance. Balance cutterblade Bent crankshaft. Consult your dealer Uneven cut Undulating ground conditions Change direction of travel Cutterblade worn Sharpen the cutterblade Cutterblade out of bal[...]

1.30 PA R T S LIST EC DECLARATION OF CONFORMITY Manufa cturer: H AY T ER L I MI TE D , Address: Spell brook, Bis hop’s Stortfo rd, Hert s. CM2 3 4BU. ENGL AND declare that the lawnmower : Mod el n am e: Type: Model No: Cutti ng width: Speed of rotat ion of the cutti ng device: Engine ma nufacturer: Speed of rotat ion of engine: Motif 4 1 Push Ped[...]

Item No. Description Part No. 432 Qty 433 Qty 434 Qty 434 Qty Item Note 1 Washer - 12mm Thin HY09485 1 0 0 0 2 Engine - HY432004 1 1 1 0 Engine 435004 0 0 0 1 3 Decal - Engine HY432009 1 0 0 0 Decal - Engine 433009 0 1 1 0 Decal - Engine 435009 0 0 0 1 4 Cable Engine Brake HY412007 1 1 1 1 5 Control Throttle HY432006 1 1 1 1 6 Knob - Handlebar 4800[...]

PA R T S LIST 1.32 Item No. Description Part No. 432 Qty 433 Qty 434 Qty 434 Qty Item Note 44 Clip - Belt Cover 100.000.801 0 2 2 2 45 Cover - Belt 100.000.800 0 1 1 0 Cover - Belt 100.024.883 0 0 0 1 46 Knob - HOC 100.000.828 1 1 1 1 47 Connecting Rod 41 432005W 1 0 0 0 Connecting Rod 48 433011W 0 1 0 0 Connecting Rod 48 434003W 0 0 1 0 Connecting[...]

1.33 LIST PA R T S Item No. Description Part No. 432 Qty 433 Qty 434 Qty 434 Qty Item Note 74 Bush - Flanged 100.000.886 0 0 2 2 75 Washer 100.000.634 0 0 2 2 76 Gear Drive Assembly LH 110.002.454 0 0 1 1 77 Gear Drive Assembly RH 110.002.455 0 0 1 1 78 Washer 13mm Dia. 100.000.621 0 0 1 1 79 Screw Taptite - M6 x 12 09546 0 0 2 2 80 Rivet - Pop 0.1[...]

1.34 PA R T S LIST B R I G G S & S T R A T T O N M O T I F 2 3 4 5 6 6 7 7 8 8 9 10 11 12 13 14 15 16 16 17 18 14 19 19 20 22 22 23 24 25 25 26 26 27 27 27 39 39 29 30 31 42 32 33 34 35 36 37 37 38 28 28 28 40 41 43 45 46 47 47 48C 49 52 52 49 50 50 50 50 51 51 53 53 54 54 56 57 58 59 20 60 61 62 63 64 65 66 66 66 67 67 67 68 26 70 71 72 73 74 [...]

1.35 Notes:- NOTES 111-2300 (A) 23/5/08 2:41 pm Page 1.35[...]

1.36 CUST OMER INFORMA TION Serial No: Engine T ype:- GCV135EA4G7SD (432/433/434) GCV160EA4G7SD (435) Engine:- Honda GCV 135 (432/433/434) GCV 160 (435) Date of Sale:- Y our Local Dealer:- 111-2300 (A) 23/5/08 2:41 pm Page 1.36[...]