Haier XQB100-96 Bedienungsanleitung

XQB100-96 User's manual Aut omatic Washing Machine Tr oubleshooting A nswer to question .....12 Names of the parts....................the 2nd cover Safety precautions .............................1 Installation and adjustment .......................3 Install the water inlet hose..................4 Packing list ..........................13 Usin[...]

Before Using Before Using Names of the par ts Adjustable foot (four pieces) Power line Water inlet valve Water absorption cushion Drain hose joint Meaning and description of the symbols Warning sign Prohibition sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in stri[...]

Before Using Before Using Safety precautions If the power line is bad, to avoid risk it is required to have it replaced by the technicians of our special shop or our agent or the after-sale service department. Keep the pin of the power plug clean. Do not use water hotter than 50 Do not wash water-proof laundries like the raincoat, bike covers etc. [...]

Safety precautions Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items (such as the kettle with hot water ) on the washing machine. Do not wash laundries with volatile materials (such as thinner, petrol etc.) The handicapped or children without care shall not use the machine. Keep the machine away from direc[...]

Installa tion and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Adjust the installation position The largest allowed slope of the base of the machine is 2 . The slanting or rough ground will result in unstable running or stoppage [...]

Before Using Before Using Install the water inlet hose Water faucet,suitable Water faucet,not suitable It is required that the front end shall be longer than 10cm. The outlet end surface of the faucet shall be flat and smooth. If not please file it to avoid leakage. 2. Loosen the screw till the water faucet can be accessed. Put the jointer of the w[...]

1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately . 2.Put the nut of the water inlet hose on the valve jointer. 3.Fasten the nut. Swing it gently to confirm if it's suitable. 1.Close the water faucet. 2.Press th[...]

Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the drain hose. Using process Using process 1 Pr epar a tion bef or e w ashing Pay attention to followings[...]

Reference weight of the laundries: Using process Using process 2 Put in the laundries The thickness, size, type of the cloth will influence the actual washing capacity. It is suitable for one time washing to put in reasonable amount of laundries and the laundries can be turned round in washing. Do not select high water level for laundrie s small th[...]

3 Add the detergent Using process Using process How to use the washing powder Direct dissolved in the machine(not applicable for fuzzy and reserve programs) 1.Fill small quantity of water. 2.Add the power. Run for 30 seconds to dissolve it completely. 3.Put in the laundries. Select suitable water level. Washing power with poor quality or not used f[...]

Using this button to switch on or off the power. When the power is on , the relevant indicator light will be lighted. Circumvolve this knob, the following programs can be selected solely: wash, strong, stanard, gentle, spin Paraphrase of the program Program the occasion total time (min) Wash Just washing , the water can be usedrepeatedly . About 6 [...]

SOAK Only washing without draining water. WASH Soak Wash Rinse Spin STRONG Wash Rinse Spin Gentle Rinse Spin Drain water only spin Cycle The indicator Attention: If you have pushed the Start/Pause button, you will select only during the soaking or washing. If you want to select during other cycle, you must switch off the power for more than 3s, the[...]

Dismantle the lint filter: Same as fig 1 put hand in place, then push it down to dismantle. Install the lint filter: After cleaning the filter, insert the bottom of the filter into the filter lid, then push the top of the filter to install it(same as fig 3 ). Clean the lint: While the lint is wet, put it into water, then clean it (same as fig 2 ). [...]

At the last spinning, it stops spinning, turns to rinse and inlets water. The reason is that the laundries leaning to one side, so the safety switch acts. After inleting water , churning up , the slant has been eliminated, then spinning again. There is still water after draining for 5 minutes(the indicator light of soak, wash, rinse, spin flashing)[...]

Packing list Name Quantity Storage position User's manual One Inside the document bag Components of the water inlet hose Outer drain hose One Inside the washing machine Drain hose clamp One Inside the accessory bag Computerized Automatic washing machine One One Lint filter One Inside the document bag Inside the accessory bag[...]

220V 50Hz High/95L Medium/72L Low/51L bout285L(highest water level; standard program) Specification Model Rated voltage frequency W ater level/W ater quantity (about) Max water consumption Rated washing power Rated washing capacity Rated spinning power Rated spinning capacity Weight Dimension Dimension n ection pressure[...]