Epson WorkForce WF-2540WF Bedienungsanleitung

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283

Zur Seite of

Richtige Gebrauchsanleitung

Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung Epson WorkForce WF-2540WF an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von Epson WorkForce WF-2540WF, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.

Was ist eine Gebrauchsanleitung?

Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung Epson WorkForce WF-2540WF die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.

Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung Epson WorkForce WF-2540WF. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.

Was sollte also eine ideale Gebrauchsanleitung beinhalten?

Die Gebrauchsanleitung Epson WorkForce WF-2540WF sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts Epson WorkForce WF-2540WF
- Den Namen des Produzenten und das Produktionsjahr des Geräts Epson WorkForce WF-2540WF
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts Epson WorkForce WF-2540WF
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen

Warum lesen wir keine Gebrauchsanleitungen?

Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von Epson WorkForce WF-2540WF zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von Epson WorkForce WF-2540WF und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service Epson finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von Epson WorkForce WF-2540WF zu überspringen, wie es bei der Papierform passiert.

Warum sollte man Gebrauchsanleitungen lesen?

In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts Epson WorkForce WF-2540WF, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.

Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von Epson WorkForce WF-2540WF widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.

Inhaltsverzeichnis der Gebrauchsanleitungen

  • Seite 1

    WF-2540 User's Guide[...]

  • Seite 2

    [...]

  • Seite 3

    Contents WF-2540 User's Guide ............................................................................................................................... 13 Product Basics .......................................................................................................................................... 14 Setting Up the Control Pane[...]

  • Seite 4

    Paper or Media Type Settings ............................................................................................................ 44 Placing Originals on the Product ............................................................................................................. 46 Placing Originals on the Scanner Glass ........................[...]

  • Seite 5

    Color Matching and Color Options - Mac OS X ......................................................................... 79 Selecting Printing Preferences - Mac OS X ................................................................................... 79 Printing Preferences - Mac OS X ....................................................................[...]

  • Seite 6

    Available Scanned File Types and Optional Settings .............................................................. 120 Scanning with Mac OS X 10.6/10.7/10.8 Using Image Capture ....................................................... 121 Available Scan Settings - Mac OS X Image Capture .................................................................[...]

  • Seite 7

    Printing Your Group Dial List ................................................................................................... 160 Setting Up Speed/Group Dial Lists Using the Fax Utility - Windows ............................................ 162 Setting Up Speed/Group Dial Lists Using the Fax Utility - Mac OS X ..................................[...]

  • Seite 8

    Printing With Expended Color Cartridges - Windows................................................................... 199 Printing With Expended Color Cartridges - Mac OS X ................................................................. 199 Conserving Low Black Ink with Windows ......................................................................[...]

  • Seite 9

    Printing a Network Status Sheet .................................................................................................. 233 Solving Copying Problems ............................................................................................................... 233 Product Makes Noise, But Nothing Copies ..................................[...]

  • Seite 10

    Image Consists of a Few Dots Only ............................................................................................. 256 Line of Dots Appears in All Scanned Images ............................................................................... 256 Straight Lines in an Image Appear Crooked .................................................[...]

  • Seite 11

    Environmental Specifications ........................................................................................................... 273 Interface Specifications .................................................................................................................... 273 External USB Device Specifications ............................[...]

  • Seite 12

    [...]

  • Seite 13

    WF-2540 User's Guide Welcome to the WF-2540 User's Guide . 13[...]

  • Seite 14

    Product Basics See these sections to learn about the basic features of your product. Setting Up the Control Panel Product Parts Locations Scanning, Copying, and Faxing from the Control Panel The Sleep Timer Epson Connect Solutions for Smartphones, Tablets, and More Setting Up the Control Panel See these sections to set up the control panel for use.[...]

  • Seite 15

    3 The Fax button 4 The LCD screen 5 The arrow buttons and the OK button 6 The number pad 7 The Redial/Pause button 8 The Stop/Reset button 9 The WiFi light 10 The ADF light 11 The Scan button 12 The Menu button 13 The Back button 14 The Speed Dial/Group Dial button 15 The Wi-Fi Setup button 16 The Start B &W button 17 The Start Color button Par[...]

  • Seite 16

    3. Press the up or down arrow buttons to select Language and press the OK button. 4. Press the up or down arrow buttons to select a language and press the OK button. 5. Press the Menu button to exit. Parent topic: Setting Up the Control Panel Turning Off Control Panel Sounds You can turn off the sound heard when you press buttons on the control pan[...]

  • Seite 17

    3. Press the up or down arrow buttons to select Sound and press the OK button. 4. Press the up or down arrow buttons to select the Off setting and press the OK button. 5. Press the Menu button to exit. Parent topic: Setting Up the Control Panel Product Parts Locations See these sections to identify the parts on your product. Product Parts - Top and[...]

  • Seite 18

    Product Parts - Top and Front 1 Edge guide 2 Sheet feeder 3 Paper support 4 Feeder guard 5 Output tray 6 Paper stopper 18[...]

  • Seite 19

    1 ADF cover 2 Automatic Document Feeder (ADF) 3 ADF edge guide 4 ADF input tray 5 ADF output tray 19[...]

  • Seite 20

    1 Document cover 2 Scanner glass 3 Control panel 4 USB port for external devices Parent topic: Product Parts Locations 20[...]

  • Seite 21

    Product Parts - Inside 1 Scanner unit 2 Ink cartridge holder in home position Parent topic: Product Parts Locations 21[...]

  • Seite 22

    Product Parts - Back 1 AC inlet 2 LINE port 3 USB port 4 EXT port 5 LAN port Parent topic: Product Parts Locations Scanning, Copying, and Faxing from the Control Panel You can scan, copy, and fax right from your product control panel. • Use the control panel to quickly scan a photo or document and save it on your computer or on a USB flash drive.[...]

  • Seite 23

    • Your product works like a copy machine too. You can place a photo or document on the scanner glass, or load pages in the automatic document feeder (ADF). • For faxing, you first need to connect a phone line as described on the Start Here sheet. Then load your document and use the control panel to enter a phone number or select a number from y[...]

  • Seite 24

    3. Press the up or down arrow buttons to select Sleep Timer and press the OK button. You see this screen: 4. Press the up or down arrow buttons to select the time period you want, then press the OK button. 5. Press the Menu to exit. Parent topic: The Sleep Timer Changing the Sleep Timer Setting - Windows You can use the printer software to change t[...]

  • Seite 25

    1. Right-click the product icon in the Windows taskbar and select Printer Settings . 2. Click the Maintenance tab and select Printer and Option Information . You see this window: 3. Select the time period you want as the Sleep Timer setting. 4. Click Send . 5. When you see the time period you selected listed as the Current Printer Setting, click OK[...]

  • Seite 26

    3. Select the time period you want as the Sleep Timer setting. 4. Click Apply . 5. Close the Printer Settings window. Parent topic: The Sleep Timer Epson Connect Solutions for Smartphones, Tablets, and More You can print documents, photos, emails, and web pages from your home, office, or even across the globe. You can use your smartphone, tablet, o[...]

  • Seite 27

    Using Epson Email Print With Epson Email Print, you can print from any device that can send email, such as your smartphone, tablet, or laptop. Just activate your product's unique email address. When you want to print, attach a PDF, Microsoft Office document, or photo and send an email to your product. 1. Set up your product for network printin[...]

  • Seite 28

    3. Obtain the email address and optional access key of the Epson product you want to use for printing, and enter this address during Remote Print setup. 4. Select the print command in your application and choose the Remote Print driver for your Epson product. Parent topic: Epson Connect Solutions for Smartphones, Tablets, and More Using Epson Scan [...]

  • Seite 29

    Using Google Cloud Print With a Google Account, you can print from your Apple or Android device to your Epson wireless product. You can also print from Chromebooks and the Google Chrome browser without drivers or cables. If you are setting up your product for the first time, set up your Epson product for wireless printing as described on the Start [...]

  • Seite 30

    Selecting Wireless Network Settings From the Control Panel You can select or change wireless network settings using your product control panel. To install your product on a wireless network, follow the instructions on the Start Here sheet and install the necessary software from the product CD. The installer program guides you through network setup.[...]

  • Seite 31

    4. Enter your wireless password (or network name and then password). • Press the arrow buttons to highlight a character or a function button displayed on the keypad. Then press the OK button to select it. • To change the case of letters, select AB12 (uppercase), ab12 (lowercase) and press the OK button. • To select a symbol, select Symbol and[...]

  • Seite 32

    Loading Paper Before you print, load paper for the type of printing you will do. Loading Paper for Documents Loading Paper for Photos Loading Envelopes Paper Loading Capacity Available EPSON Papers Borderless Paper Type Compatibility Paper or Media Type Settings Loading Paper for Documents You can print documents on a variety of paper types and siz[...]

  • Seite 33

    2. Raise the paper support and its extension, pull out the output tray, then raise the paper stopper. 3. Slide the edge guide to the left. 33[...]

  • Seite 34

    4. Insert paper, glossy or printable side up and short edge first, against the right side. If you are inserting a stack of paper, fan the sheets first and tap the stack on a flat surface to even the edges. 5. Slide the edge guide against the paper, but not too tightly. 6. Flip the feeder guard back. Always follow these paper loading guidelines: •[...]

  • Seite 35

    Parent topic: Loading Paper Related references Paper Loading Capacity Loading Paper for Photos You can print photos on a variety of paper types and sizes. 1. Flip the feeder guard forward. 35[...]

  • Seite 36

    2. Raise the paper support and its extension, pull out the output tray, then raise the paper stopper. 3. Slide the edge guide to the left. 36[...]

  • Seite 37

    4. Insert paper, glossy or printable side up and short edge first, against the right side. If you are inserting a stack of paper, fan the sheets first and tap the stack on a flat surface to even the edges. 5. Slide the edge guide against the paper, but not too tightly. 6. Flip the feeder guard back. Always follow these paper loading guidelines: •[...]

  • Seite 38

    Loading Envelopes You can print on plain paper envelopes in this size: No. 10 (4.1 × 9.5 inches [105 × 241 mm]). 1. Flip the feeder guard forward. 38[...]

  • Seite 39

    2. Raise the paper support and its extension, pull out the output tray, then raise the paper stopper. 3. Slide the edge guide to the left. 39[...]

  • Seite 40

    4. Load up to 10 envelopes against the right side. Load them printable side up and flap edge left. 5. Slide the edge guide against the envelopes, but not too tightly. 6. Flip the feeder guard back. Always follow these loading guidelines: • If you have trouble loading a stack of envelopes, press each envelope flat before loading it or load one env[...]

  • Seite 41

    Paper Loading Capacity Paper type Loading capacity Plain paper - Letter (8.5 × 11 inches Approximately 100 sheets * [216 × 279 mm]) or A4 (8.3 × 11.7 inches [210 × 297 mm]) ** Epson Bright White Paper ** 80 sheets Epson Presentation Paper Matte - Letter (8.5 × 11 inches [216 × 279 mm]) Epson Photo Paper Glossy 20 sheets Epson Premium Photo Pa[...]

  • Seite 42

    Available EPSON Papers You can purchase genuine Epson ink and paper at Epson Supplies Central at www.epson.com/ink3 (U.S. sales) or www.epson.ca (Canadian sales). You can also purchase supplies from an Epson authorized reseller. To find the nearest one, call 800-GO-EPSON (800-463-7766). Paper Type Size Part number Sheet count Epson Bright White Pap[...]

  • Seite 43

    Paper Type Size Part number Sheet count Epson Premium Photo Paper 4 × 6 inches (102 × 152 mm) S041808 40 Glossy S041727 100 5 × 7 inches (127 × 178 mm) S041464 20 8 × 10 inches (203 × 254 mm) S041465 20 Letter (8.5 × 11 inches S042183 25 [216 × 279 mm]) S041667 50 Epson Photo Paper Glossy 4 × 6 inches (102 × 152 mm) S041809 50 S042038 100[...]

  • Seite 44

    • Epson Premium Photo Paper Semi-gloss Borderless Paper Sizes • 4 × 6 inches (102 × 152 mm) • 5 × 7 inches (127 × 178 mm) • 8 × 10 inches (203 × 254 mm) • Letter (8.5 × 11 inches [216 × 279 mm]) Parent topic: Loading Paper Paper or Media Type Settings For this paper Select this paper Type or Media Type setting Plain paper Plain Pa[...]

  • Seite 45

    Parent topic: Loading Paper Related references Paper Type Settings - Copying 45[...]

  • Seite 46

    Placing Originals on the Product Follow the instructions here to place your original documents or photos on the product. Caution: Do not place anything on top of your product or use its cover as a writing surface to avoid damaging it. Placing Originals on the Scanner Glass Placing Originals in the Automatic Document Feeder Placing Originals on the [...]

  • Seite 47

    2. Place your original facedown on the scanner glass with the top facing as shown. Slide the original to the edges of the indicated corner. Note: You can place multiple originals on the scanner glass. Just make sure they are at least 0.8 inch (20 mm) away from each other. 3. Close the document cover gently to keep your original in place. Parent top[...]

  • Seite 48

    1. Slide the ADF edge guide outward. 2. Fan your stack of originals and tap them gently on a flat surface to even the edges. 48[...]

  • Seite 49

    3. Insert the originals into the ADF faceup and top-edge first. The ADF light on the control panel turns on. 4. Slide the ADF edge guide against the originals, but not too tightly. Parent topic: Placing Originals on the Product Related references Automatic Document Feeder (ADF) Specifications 49[...]

  • Seite 50

    Related topics Copying Scanning 50[...]

  • Seite 51

    Copying See the information here to copy documents or photos using your product. Note: Copies may not be exactly the same size as your originals. Copying Documents or Photos Copying ID Cards Copying Documents or Photos You can copy documents or photos onto various sizes and types of paper, including Epson special papers. 1. Place your original docu[...]

  • Seite 52

    4. To print more than one copy, press the up or down arrow buttons to select the number (up to 99). 5. If you need to adjust the darkness of your copy, press the left or right arrow buttons to change the Density setting. 6. To change any of the print settings displayed on the LCD screen, press the Menu button, select Paper and Copy Settings , press[...]

  • Seite 53

    Paper type loaded Paper Type setting Plain paper Plain Paper Epson Bright White Paper Epson Presentation Paper Matte Epson Photo Quality Self-adhesive Sheets Epson Iron-on Cool Peel Transfer paper Epson Brochure & Flyer Paper Matte Double-sided Photo Paper Epson Ultra Premium Presentation Paper Matte Epson Premium Presentation Paper Matte Epson[...]

  • Seite 54

    Copying Options Select the copying options you want to use for your copies. Note: Not all options or settings may be available, depending on other copying settings. Copying option Available settings Description Density Various levels Adjusts the lightness or darkness of copies Layout With Border Leaves a small margin around the image Borderless Exp[...]

  • Seite 55

    1. Load plain paper in one of these sizes: Letter (8.5 × 11 inches [216 × 279 mm]) or A4 (8.3 × 11.7 inches [210 × 297 mm]). Note: Load only the recommended number of sheets. 2. Press the Copy button. You see this screen: 3. To print more than one copy, press the up or down arrow buttons to select the number (up to 99). 4. Press the Menu button[...]

  • Seite 56

    Note: To cancel printing, press the Stop/Reset button. Parent topic: Copying Related topics Loading Paper Placing Originals on the Product 56[...]

  • Seite 57

    Printing From a Computer Before printing from your computer, make sure you have set up your product and installed its software as described on the Start Here sheet. Note: If you have an Internet connection, it is a good idea to check for updates to your product software on Epson's support website. If you see a Software Update screen, select En[...]

  • Seite 58

    2. Select the print command in your application. Note: You may need to select a print icon on your screen, the Print option in the File menu, or another command. See your application's help utility for details. 3. If necessary, select your product name as the printer you want to use. Note: You may also need to select Properties or Preferences [...]

  • Seite 59

    5. If you are printing a borderless photo, select Borderless . You can click Settings to access additional options for borderless printing. Note: You must select a compatible borderless paper type and size to print without borders. Check the borderless paper compatibility list for details. 6. Select the orientation of your document. Note: If you ar[...]

  • Seite 60

    Paper or Media Type Settings Related tasks Printing Your Document or Photo - Windows Selecting Double-sided Printing Settings - Windows Print Quality Options - Windows You can select any of the available Quality options to fine-tune the quality of your print. Some settings may be unavailable, depending on the paper type and border setting you have [...]

  • Seite 61

    Note: Some options may be pre-selected or unavailable, depending on other settings you have chosen or if you are accessing the product over a network or as a shared printer. 1. Select the 2-Sided Printing checkbox. 2. Click the Settings button. You see this window: 3. Select the double-sided printing options you want to use. 4. Click OK to return t[...]

  • Seite 62

    5. Print a test copy of your double-sided document to test the selected settings. 6. Follow any instructions displayed on the screen during printing. Note: The surface of the paper may smear during double-sided printing. Make sure the ink has dried before reloading the paper. Double-sided Printing Options - Windows Parent topic: Printing with Windo[...]

  • Seite 63

    1. To change the size of your printed document or photo, select the Reduce/Enlarge Document checkbox and select one of these sizing options: • Select the Fit to Page option to size your image to fit the paper you loaded. Select the size of the your document or photo as the Document Size setting, and the size of your paper as the Output Paper sett[...]

  • Seite 64

    4. To add a header or footer to your document, select Header/Footer , then select Settings to customize the text and location. 5. Select any of the Additional Settings options to customize your print. Custom Color Correction Options - Windows Image Options and Additional Settings - Windows Header/Footer Settings - Windows Parent topic: Printing wit[...]

  • Seite 65

    Color Controls Lets you select a Color Mode setting, individual settings for Brightness , Contrast , Saturation , and Density , and individual color tones. Depending on the selected color mode, you can also adjust the midtone density using the Gamma setting. Fix Photo Improves the color, contrast, and sharpness of flawed photos. Note: Fix Photo use[...]

  • Seite 66

    Header/Footer Settings - Windows You can select any of the Header/Footer Settings options to add headers or footers when you print. The items are available to print at the top or bottom of your pages, in either the left, right, or center of the page. Note: These settings are not saved with your document. You can select to print the following inform[...]

  • Seite 67

    2. Place your cursor over one of the Printing Presets to view its list of settings. 3. Use any of the available options on the screen to control your printing presets. 4. To choose an option for printing, select it. 5. Click OK . Parent topic: Printing with Windows Printing Your Document or Photo - Windows Once you have selected your print settings[...]

  • Seite 68

    2. Click OK or Print to start printing. Parent topic: Printing with Windows Selecting Default Print Settings - Windows When you change your print settings in a program, the changes apply only while you are printing in that program session. If you want to change the print settings you use in all your Windows programs, you can select new default prin[...]

  • Seite 69

    3. Select the print settings you want to use as defaults in all your Windows programs. 4. Click OK . These settings are now the defaults selected for printing. You can still change them as needed for printing in any program session. Changing the Language of the Printer Software Screens Parent topic: Printing with Windows Changing the Language of th[...]

  • Seite 70

    You see the maintenance options: 4. Select the language you want to use as the Language setting. 5. Click OK to close the printer software window. The printer software screens appear in the language you selected the next time you access them. Parent topic: Selecting Default Print Settings - Windows Changing Automatic Update Options Your printer sof[...]

  • Seite 71

    3. Do one of the following: • To change how often the software checks for updates, select a setting in the Check every menu. • To disable the automatic update feature, select the Never option. 4. Click OK to exit. Note: If you choose to disable the automatic update feature, you can check for updates manually. Parent topic: Printing with Windows[...]

  • Seite 72

    Selecting Basic Print Settings - Mac OS X Select the basic settings for the document or photo you want to print. 1. Open a photo or document for printing. 2. Select the print command in your application. Note: You may need to select a print icon on your screen, the Print option in the File menu, or another command. See your application's help [...]

  • Seite 73

    Note: The print window may look different, depending on the version of Mac OS X and the application you are using. 5. Select the Copies and Pages settings as necessary. Note: If you do not see these settings in the print window, check for them in your application before printing. 6. Select the page setup options: Paper Size and Orientation . Note: [...]

  • Seite 74

    7. Select any application-specific settings that appear on the screen, such as those shown in the image above for the Preview application. 8. Select Print Settings from the pop-up menu. You see these settings: 9. Select the type of paper you loaded as the Media Type setting. Note: The setting may not exactly match the name of your paper. Check the [...]

  • Seite 75

    10. Select the Print Quality setting you want to use. 11. Select any of the available print options. Print Quality Options - Mac OS X Print Options - Mac OS X Parent topic: Printing with Mac OS X Related references Paper or Media Type Settings Related tasks Selecting Page Setup Settings - Mac OS X Printing Your Document or Photo - Mac OS X Print Qu[...]

  • Seite 76

    Expansion If you selected a borderless paper size setting, this option adjusts the image expansion settings to control printing at the edges of borderless prints. Grayscale Prints text and graphics in black or shades of gray. Mirror Image Lets you flip the printed image horizontally. Note: If you select the Min option for the Expansion setting, you[...]

  • Seite 77

    Note: You can reduce or enlarge the size of the printed image by selecting Paper Handling from the pop-up menu and selecting a scaling option. Parent topic: Printing with Mac OS X Related references Borderless Paper Type Compatibility Selecting Print Layout Options - Mac OS X You can select a variety of layout options for your document or photo by [...]

  • Seite 78

    Managing Color - Mac OS X You can adjust the Color Matching and Color Options settings to fine-tune the colors in your printout, or turn off color management in your printer software. 1. Select Color Matching from the pop-up menu in the print window. 2. Select one of the available options. 3. Select Color Options from the pop-up menu in the print w[...]

  • Seite 79

    Color Matching and Color Options - Mac OS X You can select from these settings on the Color Matching and Color Options menus. Color Matching Settings EPSON Color Controls Lets you manage color using controls in your printer software, or turn off color management. ColorSync Prints using standard color profiles for your product and paper to help matc[...]

  • Seite 80

    3. Select Driver . You see this screen: 4. Select any of the available printing preferences. 5. Click OK . Printing Preferences - Mac OS X Parent topic: Printing with Mac OS X Printing Preferences - Mac OS X You can select from these settings on the Driver tab. Skip Blank Page Ensures that your product does not print pages that contain no text or i[...]

  • Seite 81

    Warning Notifications Lets you choose whether or not to receive warning notifications from the printer software when ink is low. Parent topic: Selecting Printing Preferences - Mac OS X Printing Your Document or Photo - Mac OS X Once you have selected your print settings, you are ready to print. Click Print at the bottom of the print window. Checkin[...]

  • Seite 82

    2. Select the following options as necessary: Mac OS X 10.5/10.6/10.7: • To cancel printing, click the print job and click the Delete icon. • To pause a print job, click the print job and click the Hold icon. To resume a print job, click the print job marked "Hold" and click the Resume icon. • To pause printing for all queued print [...]

  • Seite 83

    Cancelling Printing Using a Product Button If you need to cancel printing, press the Stop/Reset button on your product. Parent topic: Printing From a Computer 83[...]

  • Seite 84

    Scanning You can scan original documents or photos and save them as digital files. Starting a Scan Selecting Epson Scan Settings Scanning with Mac OS X 10.6/10.7/10.8 Using Image Capture Scanning Special Projects Starting a Scan After placing your original documents or photos on your product for scanning, start scanning using one of these methods. [...]

  • Seite 85

    3. Press the up or down arrow buttons to select a scan option and press the OK button. • Scan to USB Device saves your scan file on a USB flash drive and lets you select the file format, resolution, and other settings. • Scan to Cloud sends your scanned files to a destination that you have registered with Epson Connect. • Scan to PC saves you[...]

  • Seite 86

    4. To scan to your computer, you first need to select how you connected your product to your computer: • If your product is connected directly to your computer with a USB cable, press the up or down arrow buttons to select USB Connection . • If your product is connected to your computer over a network, press the up or down arrow buttons to sele[...]

  • Seite 87

    Scan to USB Device Available options Description setting Contrast –4 to +4 Press the arrow buttons to decrease or increase image contrast Document Orientation Portrait For PDF documents Landscape Parent topic: Starting a Scan Using the Product Control Panel Changing Default Scan Button Settings You can view or change the default scan settings you[...]

  • Seite 88

    • Mac OS X : Open the Applications folder, open the Epson Software folder, and double-click the EPSON Scan icon. Note: With Mac OS X 10.6, 10.7, or 10.8, in addition to scanning with Image Capture, you can download and install Epson Scan scanning software. Epson Scan provides additional image adjustment and photo correction features for enhancing[...]

  • Seite 89

    Parent topic: Starting a Scan Related tasks Scanning with Mac OS X 10.6/10.7/10.8 Using Image Capture Related topics Selecting Epson Scan Settings 89[...]

  • Seite 90

    Starting a Scan from a Scanning Program You can start Epson Scan from a scanning program to select scan settings, scan, and open the scanned image in the program. Note: With Mac OS X 10.6, 10.7, or 10.8, in addition to scanning with Image Capture, you can download and install Epson Scan scanning software. Epson Scan provides additional image adjust[...]

  • Seite 91

    Note: Epson Scan may start in a mode other than Home Mode when you first access it. Parent topic: Starting a Scan Related tasks Scanning with Mac OS X 10.6/10.7/10.8 Using Image Capture 91[...]

  • Seite 92

    Related topics Selecting Epson Scan Settings Selecting Epson Scan Settings After starting Epson Scan, you can select settings in various modes to customize your scan. Scan Modes Selecting the Scan Mode Scanning in Office Mode Scanning in Home Mode Scanning in Professional Mode Image Preview Guidelines Scan Resolution Guidelines Selecting Scan File [...]

  • Seite 93

    Parent topic: Selecting Epson Scan Settings Related tasks Scanning in Home Mode Scanning in Office Mode Scanning in Professional Mode Scanning in Office Mode When you scan in Office Mode, Epson Scan automatically saves your scanned file in JPEG format in your operating system's Pictures or My Pictures folder, or opens it in your scanning progr[...]

  • Seite 94

    2. Select the Image Type setting that matches your original. 3. Select the Document Source setting indicating where you placed your original. Note: If you are using the ADF, remove any documents from the scanner glass. 4. Select the Size and Orientation settings that match your original. 94[...]

  • Seite 95

    5. Select the Resolution setting you want to use for your scan. 6. Click the Preview button. Epson Scan previews your original and displays the result in a separate Preview window. 7. If you are using the ADF, reinsert your original into the ADF. 8. If desired, select the area in your preview image that you want to scan (scan area). 9. Select any o[...]

  • Seite 96

    Selecting a Scan Area - Office Mode You can select a specific area in your preview image to include in your scanned image. You can select the entire image area or a portion of it. You can even select multiple scan areas to create multiple scanned images of different areas. You can also use the scan area to select specific Image Adjustments settings[...]

  • Seite 97

    2. Do the following, as necessary, to work with the selected scan area: • If the marquee is correct, continue with the next step. • To move the marquee, click inside the scan area and drag the marquee where you want it. • To resize the scan area, place your cursor over the edge or corner of the marquee, then click and drag the edges where you[...]

  • Seite 98

    Unsharp Mask Makes the edges of certain image areas clearer. Turn off this option to leave softer edges. Descreening Removes the ripple pattern that might appear in subtly shaded image areas, such as skin tones. This option improves results when scanning magazines or newspapers. (The results of descreening do not appear in the preview image, only i[...]

  • Seite 99

    2. Select the Document Type setting that matches your original, such as Photograph or Text/Line Art . 3. Select the Image Type setting that matches your original. 99[...]

  • Seite 100

    4. Select the way you plan to use your scanned image as the Destination setting. (The Resolution setting is selected automatically based on the Destination setting you choose.) • Screen/Web : Select this option for images you will e-mail, view on a computer screen, or post on the web. • Printer : Select this option for images you will print or [...]

  • Seite 101

    Selecting a Scan Area - Home Mode You can select a specific area in your preview image to include in your scanned image. You can select the entire image area or a portion of it. You can even select multiple scan areas to create multiple scanned images of different areas (Normal Preview mode only). You can also use the scan area to select specific I[...]

  • Seite 102

    • Normal preview : Click the Auto Locate icon to create a marquee (dotted line) on the preview image. 102[...]

  • Seite 103

    2. Do the following, as necessary, to work with the selected scan area: • If the marquee is correct, continue with the next step. • To move the marquee, click inside the scan area and drag the marquee where you want it. • To resize the scan area, place your cursor over the edge or corner of the marquee, then click and drag the edges where you[...]

  • Seite 104

    • Normal preview : To create additional marquees (up to 50), click the Copy Marquee icon to copy the existing marquee and paste it on the preview image. Note: If you draw multiple marquees, make sure you select the All button in the Preview window before you scan. Otherwise, only the area inside the currently selected marquee will be scanned. •[...]

  • Seite 105

    Dust Removal Removes dust marks from your originals automatically. Text Enhancement Sharpens the appearance of letters in text documents. Auto Area Segmentation Makes grayscale images clearer and text recognition more accurate by separating the text from the graphics. Brightness Adjusts the overall lightness and darkness of the scanned image. Contr[...]

  • Seite 106

    3. Do the following, as necessary, to work with the selected scan area: • To move the marquee, click inside the scan area and drag the marquee where you want it. • To resize the scan area, place your cursor over the edge or corner of the marquee, then click and drag the edge where you want it. Note: Manually adjusting the marquee will not chang[...]

  • Seite 107

    4. To create a scanned image size that is not available in the Target Size list, click the Customize option. 5. Name the custom size, enter the size, click Save , and click OK . Then create a scan area on the preview image. The marquee is automatically proportioned for your custom scan size. Parent topic: Scanning in Home Mode Scanning in Professio[...]

  • Seite 108

    108[...]

  • Seite 109

    2. Select the Document Type setting that matches your original, such as Reflective for documents or photos. 3. Select the Document Source setting indicating where you placed your original. Note: If you are using the ADF, remove any documents from the scanner glass. 4. Select the specific type of original you are scanning as the Auto Exposure Type s[...]

  • Seite 110

    Scan Resolution Guidelines Related tasks Selecting Scan File Settings Available Document Source Settings - Professional Mode You can select these Document Source options in Epson Scan Professional Mode. ADF Selects the Automatic Document Feeder as the location where the originals are placed on your product for scanning. Document Table Selects the s[...]

  • Seite 111

    1. Do one of the following to select your scan area in the Preview image: • Normal preview : Click the Auto Locate icon to create a marquee (dotted line) on the preview image. • Thumbnail preview : Your scan area is selected automatically, but you can change it. Place your cursor in one corner of the desired scan area, then click and drag the c[...]

  • Seite 112

    2. Do the following, as necessary, to work with the selected scan area: • If the marquee is correct, continue with the next step. • To move the marquee, click inside the scan area and drag the marquee where you want it. • To resize the scan area, place your cursor over the edge or corner of the marquee, then click and drag the edges where you[...]

  • Seite 113

    • Normal preview : To create additional marquees (up to 50, if available), click the Copy Marquee icon to copy the existing marquee and paste it on the preview image. • To delete a marquee, click the marquee, then click the Delete Marquee icon. Note: If you draw multiple marquees, make sure you select the All button in the Preview window before[...]

  • Seite 114

    Descreening Removes the ripple pattern that might appear in subtly shaded image areas, such as skin tones. This option improves results when scanning magazines or newspapers. (The results of descreening do not appear in the preview image, only in your scanned image.) Color Restoration Restores the colors in faded photos automatically. Backlight Cor[...]

  • Seite 115

    Threshold Adjusts the level at which black areas in text and line art are delineated, improving text recognition in OCR (Optical Character Recognition) programs. Parent topic: Scanning in Professional Mode Selecting a Scan Size - Professional Mode You can reduce or enlarge the size of your image as you scan. You can also select a specific scan size[...]

  • Seite 116

    3. Do the following, as necessary, to work with the selected scan area: • To move the marquee, click inside the scan area and drag the marquee where you want it. • To resize the scan area, place your cursor over the edge or corner of the marquee, then click and drag the edge where you want it. Note: Manually adjusting the marquee will not chang[...]

  • Seite 117

    4. To create a scanned image size that is not available in the Target Size list, click the Customize option. 5. Name the custom size, enter the size, click Save , and click OK . Then create a scan area on the preview image. The marquee is automatically proportioned for your custom scan size. 6. To use additional sizing tools, click the + (Windows) [...]

  • Seite 118

    • Trimming : Turns automatic image cropping on or off. • Unlock icon: Unlocks the width/height proportions of the scanned image size so you can adjust it without constraint. Parent topic: Scanning in Professional Mode Image Preview Guidelines You can preview your scanned image so you can adjust the scan settings using the preview as a guide. Th[...]

  • Seite 119

    • Fax: 200 dpi Parent topic: Selecting Epson Scan Settings Selecting Scan File Settings You can select the location, name, and format of your scan file on the File Save Settings window. You can also select various optional settings that control how Epson Scan behaves when you scan and save files. The File Save Settings window may appear after you[...]

  • Seite 120

    1. Do one of the following to select the folder in which you want to save your scanned image: • Click the button for one of the displayed folders. • Click the Other button, click the Browse or Choose button, and select a folder. 2. Type in a stem file name in the Prefix field. This name is used along with numbers to automatically name your scan[...]

  • Seite 121

    PRINT Image Matching II (*.jpg or *.tif) File formats that include Epson PRINT Image Matching II data for enhanced quality and a wider color range (does not affect the way the image displays on the screen). TIFF (*.tif) A file format created for exchanging data between many programs, such as graphic and DTP software. Optional Settings Overwrite any[...]

  • Seite 122

    4. Select the Scan Mode setting indicating where you placed your original (if available). Select any other scan settings as necessary. 5. Select the folder in which you want to save your scanned file in the Scan To pop-up menu. 6. Click Scan . 122[...]

  • Seite 123

    Your scanned file is saved in the folder you selected. Available Scan Settings - Mac OS X Image Capture Parent topic: Scanning Available Scan Settings - Mac OS X Image Capture You can select these scan settings in your imaging editing application for Mac OS X. Unsharp Mask Makes the edges of certain image areas clearer. Turn off this option to leav[...]

  • Seite 124

    3. Select the scan mode you want to use. 4. Select the scan settings for your scan. 5. Preview your image. 6. When you finish selecting all your settings, click Scan . You see the File Save Settings window. 7. Select PDF as the Type setting. 8. Select any other settings you want to use on the File Save Settings window. Click the Options button to a[...]

  • Seite 125

    9. Click OK . Epson Scan scans your document and you see this window: 10. Choose one of the following options on the screen: • If you are scanning only one page, click Save File . • If you need to scan additional pages in a document, click Add page . Place additional pages on the product for scanning, click Scan , and repeat until you have scan[...]

  • Seite 126

    Related tasks Selecting the Scan Mode Selecting Scan File Settings Related topics Starting a Scan Selecting Epson Scan Settings Restoring Photo Colors as You Scan You can restore the colors in faded photos as you scan them using Epson Scan's Color Restoration setting. You can select this setting in any of the available scan modes. Note: Color [...]

  • Seite 127

    Related topics Starting a Scan Selecting Epson Scan Settings Convert Scanned Documents to Editable Text (OCR) You can scan a document and convert the text into data that you can edit with a word processing, spreadsheet, or HTML-editing program. This process is called OCR (Optical Character Recognition). To scan and use OCR, you need to install an O[...]

  • Seite 128

    3. Select the language used in the document you are going to scan as the Document Language setting. 4. Click either the Scan to Other Formats icon or the icon that corresponds with the program you want to scan to. 5. If you see the Select Scanner window, select your product and click OK . Note: Do not select a WIA option for your product; it will n[...]

  • Seite 129

    Your document is scanned and processed into editable text, then you see the Save As window. 10. Select a name and a file format for your document and click Save . The file is saved and then opened in an application associated with the file type you selected, if available on your system. Parent topic: Convert Scanned Documents to Editable Text (OCR)[...]

  • Seite 130

    3. Open the Get Images From pop-up menu and select your product. 4. Select the language used in the document you are going to scan as the Document Language setting. 5. Select the type of document you are going to scan. Epson Scan starts in the last scan mode you used. 6. Select your scan settings and click Scan . Your document is scanned and you se[...]

  • Seite 131

    You see the Save Converted File As window: 8. Click the Save button. The file is saved and then opened in an application associated with the file type you selected, if available on your system. Parent topic: Convert Scanned Documents to Editable Text (OCR) 131[...]

  • Seite 132

    Faxing See these sections to fax using your product. Note: This product allows you to store names, telephone numbers, and fax data in its memory even when the power is turned off. Make sure you restore all of the default settings if you give away or dispose of the product. This will erase all of your network settings and fax data. Connecting a Tele[...]

  • Seite 133

    1. Connect the phone cable to your telephone wall jack and to the LINE port on your product. Note: If you have a DSL or ISDN connection, you must connect the appropriate DSL filter, or ISDN terminal adapter or router to the wall jack to be able to use the line for faxing or voice calls using your product. Contact your DSL or ISDN provider for the n[...]

  • Seite 134

    1 Telephone wall jack 2 DSL filter 3 DSL modem ISDN connection (one phone number) 134[...]

  • Seite 135

    1 ISDN wall jack 2 Terminal adapter or ISDN router ISDN connection (two phone numbers) 135[...]

  • Seite 136

    1 ISDN wall jack 2 Terminal adapter or ISDN router 136[...]

  • Seite 137

    2. If you are connecting a telephone or answering machine to your product using a second phone cable, remove the cap from the EXT port on your product. 137[...]

  • Seite 138

    3. Connect the second phone cable to your telephone or answering machine and to the EXT port on your product. Note: If you connect an answering machine and Auto Answer mode is turned on, make sure the product's Rings to Answer setting is set higher than the number of rings your answering machine is set to answer a call. Any phone or answering [...]

  • Seite 139

    Setting Up Fax Features Before faxing with your product, set up your fax header and select the fax features you want to use. Note: If you leave your product unplugged for a long period of time, you may need to reset the date and time settings for faxes. Setting Up Fax Features Using the Product Control Panel Setting Up Fax Features Using the Fax Ut[...]

  • Seite 140

    1. Press the Menu button. 2. Press the up or down arrow buttons to select Printer Setup and press the OK button. You see this screen: 3. Press the up or down arrow buttons to select Country/Region and press the OK button. 4. Press the up or down arrow buttons to select your country or region and press the OK button. You see a confirmation screen. 5[...]

  • Seite 141

    3. Press the up or down arrow buttons to select Date/Time and press the OK button. You see this screen: 4. Press the up or down arrow buttons to select the date format you want to use and press the OK button. 5. Use the number buttons on the control panel to enter the current date, then press the OK button. 6. Press the up or down arrow buttons to [...]

  • Seite 142

    7. Use the number buttons on the control panel to enter the current time, select AM or PM if you selected a 12-hour time format, then press the OK button. 8. Press the up or down arrow buttons to select Daylight Saving Time and press the OK button. 9. Press the up or down arrow buttons to select Summer if Daylight Saving Time (DST) is in effect; ot[...]

  • Seite 143

    5. Press the up or down arrow buttons to select Header and press the OK button. 6. Press the OK button to select Fax Header . You see this screen: 7. Use the keypad to enter the sender name for your fax source, such as your name or a business name. You can enter up to 40 characters. 8. Select Done and press the OK button to return to the Header men[...]

  • Seite 144

    • Press the arrow buttons to highlight a character or a function button displayed on the keypad. Then press the OK button to select it. • To change the case of letters, select AB12 (uppercase), ab12 (lowercase) and press the OK button. • To select a symbol, select Symbol and press the OK button. Then highlight a symbol and press the OK button[...]

  • Seite 145

    4. Press the up or down arrow buttons to select Send Settings or Receive Settings and press the OK button. 5. Press the up or down arrow buttons to change any of the available settings. 6. Press the Menu button to exit. Parent topic: Setting Up Fax Features Using the Product Control Panel Related references Fax Sending Options Fax Receive Options S[...]

  • Seite 146

    4. Press the up or down arrow buttons to select Communication and press the OK button. 5. Press the up or down arrow buttons to change any of the available settings. 6. Press the Menu button to exit. Parent topic: Setting Up Fax Features Using the Product Control Panel Related references Fax Communications Options Printing Fax Reports You can run a[...]

  • Seite 147

    5. Press the up or down arrow buttons to select one of the available reports and press the OK button. Note: If you select Fax Log , additionally select Print and press the OK button. 6. Press one of the Start buttons to print the report. Parent topic: Setting Up Fax Features Using the Product Control Panel Related references Fax Report Options Rest[...]

  • Seite 148

    3. Press the up or down arrow buttons to select one of the available options and press the OK button. You see a confirmation screen. 4. Select Yes or No and press the OK button. Parent topic: Setting Up Fax Features Using the Product Control Panel Related references Restore Default Settings Options Fax Sending Options Set the options you want to us[...]

  • Seite 149

    Setting Options Description Last Transmission On Error Prints a report on the last transmitted fax only if a fax Report error occurs (default setting). On Send Prints a report on the last transmitted fax after every fax you send. Off Does not print a report on the last transmitted fax after you send a fax. Parent topic: Setting Up Fax Features Usin[...]

  • Seite 150

    Setting Options Description DRD All If you are using a Distinctive Ring Service on your phone line, your telephone company can assign two Single or more phone numbers to the same line and assign Double different ring patterns to each. If you use this service, select the number of rings for your fax Triple number as the DRD setting so your product c[...]

  • Seite 151

    Fax Report Options Select the fax report or list you want to print. Fax Log View or print a report on recent fax transmissions. Last Transmission Print a report on your last fax transmission. Speed Dial List Print a list of your speed dial entries. Group Dial List Print a list of your group dial entries. Reprint Faxes Reprint the most recent incomi[...]

  • Seite 152

    1. Do one of the following: • Windows 8 : Navigate to the Start screen. • Windows (other versions) : Click or Start > Programs or All Programs > EPSON Software . 2. Select FAX Utility . You see this window: 3. Select Fax Settings for Printer . (Select your product, if prompted.) You see this window: 152[...]

  • Seite 153

    4. Select Fax Settings . 5. Follow the prompts that appear on the screen to enter your fax header information and select your fax settings. Note: For detailed information, select the FAX Utility Help option. Parent topic: Setting Up Fax Features Setting Up Fax Features Using the Fax Utility - Mac OS X You can set up your fax header and select your [...]

  • Seite 154

    3. Select your FAX product in the Printer list. 4. Select Fax Settings . 5. Follow the prompts that appear on the screen to enter your fax header information and select your fax settings. Note: For detailed information, select the FAX Utility ? icon. Parent topic: Setting Up Fax Features Setting Up Speed Dial and Group Dial Lists You can set up a s[...]

  • Seite 155

    Creating Speed Dial List Entries Printing Your Speed Dial List Creating Group Dial List Entries Printing Your Group Dial List Parent topic: Setting Up Speed Dial and Group Dial Lists Creating Speed Dial List Entries You can create a speed dial list of fax numbers to help you quickly send faxes. Note: You can create up to 60 speed dial and group dia[...]

  • Seite 156

    5. Select the number you want to use for the fax number you are adding and press the OK button. 6. Use the numeric buttons on the control panel to enter the fax number. You can enter up to 64 characters. 7. Press the OK button. You see this screen: 8. Use the keypad to enter a name for the speed dial entry. You can enter up to 30 characters. 9. Sel[...]

  • Seite 157

    10. Do the following as necessary: • To create additional entries, select Create and repeat the steps above. • To edit an existing entry, press the up or down arrow buttons to select Edit , select the entry, press the OK button, and change the information. • To delete an entry, press the up or down arrow buttons to select Delete , select the [...]

  • Seite 158

    5. Select Speed Dial List and press the OK button. 6. Press one of the Start buttons to print the report. Parent topic: Setting Up Speed/Group Dial Lists Using the Product Control Panel Creating Group Dial List Entries You can create a group dial list after creating a speed dial list. Each group dial list can include up to 30 fax numbers. Note: You[...]

  • Seite 159

    2. Press the Menu button. 3. Press the up or down arrow buttons to select Group Dial Setup and press the OK button. 4. Press the up or down arrow buttons to select Create and press the OK button. You see this screen: 5. Select the number you want to use for the group dial entry you are adding and press the OK button. You see this screen: 6. Use the[...]

  • Seite 160

    7. Select Done and press the OK button. You see a screen similar to this: 8. Press the up or down arrow buttons to highlight the speed dial entry you want to add to the group, and press the right arrow button to select it. 9. Continue selecting speed dial entries as necessary. 10. When you are finished, press the OK button. You return to the Group [...]

  • Seite 161

    2. Press the Fax button. 3. Press the Menu button. 4. Press the up or down arrow buttons to select Fax Report and press the OK button. You see this screen: 5. Select Group Dial List and press the OK button. 6. Press one of the Start buttons to print the report. Parent topic: Setting Up Speed/Group Dial Lists Using the Product Control Panel 161[...]

  • Seite 162

    Setting Up Speed/Group Dial Lists Using the Fax Utility - Windows You can set up your speed dial and group dial lists using the FAX Utility for Windows. The utility also lets you import fax numbers from the Windows Address Book and back up fax numbers stored in your product's memory. Note: You can create up to 60 speed dial and group dial entr[...]

  • Seite 163

    4. Select Speed Dial/Group Dial List . You see this window: 163[...]

  • Seite 164

    5. Select an empty entry and click the icon. Note: To edit an entry, select it and click the icon. To delete an entry, select it and click the icon. 6. Do one of the following: • To create a speed dial entry, select Speed Dial , enter a name and fax number, and click OK . • To create a group dial entry, select Group , enter a name, select your [...]

  • Seite 165

    Setting Up Speed/Group Dial Lists Using the Fax Utility - Mac OS X You can set up your speed dial and group dial lists using the FAX Utility. The utility also lets you import fax numbers from the MacAddress Book and back up fax numbers to your product's memory. Note: You can create up to 60 speed dial and group dial entries combined. 1. Do one[...]

  • Seite 166

    5. To add an entry, double-click an empty entry. Note: To edit an entry, select it and change the information. To delete an entry, select it and press the Delete key on your keyboard. 6. Do one of the following: • To create a speed dial entry, select Speed Dial , enter a name and fax number, and click OK . • To create a group dial entry, select[...]

  • Seite 167

    Sending Faxes Using the Fax Utility - Windows Sending Faxes Using the Fax Utility - Mac OS X Parent topic: Faxing Sending Faxes from the Product Control Panel See these sections to send faxes using the product's control panel. Manually Dialing or Redialing Fax Numbers Selecting Fax Numbers From Speed or Group Dial Lists Dialing Fax Numbers fro[...]

  • Seite 168

    3. Do one of the following: • Use the numeric keypad to enter the fax number. You can enter up to 64 characters. • Press the Redial/Pause button to redial the last dialed fax number. 4. If you need to change any fax settings, press the Menu button, select Send Settings , press the OK button, and select your settings. When you finish selecting s[...]

  • Seite 169

    3. Press the Speed Dial/Group Dial button. If you want to select a group dial entry, press the button twice. 4. Select the speed dial or group dial entry you want to use, then press the OK button. 5. If you need to change any fax settings, press the Menu button, select Send Settings , press the OK button, and select your settings. When you finish s[...]

  • Seite 170

    3. Dial the fax number from the connected telephone. You see this screen: 4. Using your product control panel, select Send and press the OK button. Note: Your product now communicates with the recipient's fax machine. 5. If you need to change any fax settings, press the Menu button, select Send Settings , press the OK button, and select your s[...]

  • Seite 171

    Note: You can only send faxes in black-and-white when you use this option. 1. Place your original on the product for faxing. 2. Press the Fax button. 3. Press the Menu button, press the up or down arrow buttons to select Broadcast Fax , and press the OK button. 4. Do the following as necessary: • Use the numeric keypad to manually enter fax numbe[...]

  • Seite 172

    After scanning your originals, your product dials the number and sends the fax. Note: If the number is busy or there is a communication problem, your product displays a redialing message and will redial the number in a few minutes. Parent topic: Sending Faxes from the Product Control Panel Sending a Fax at a Specified Time You can send a fax at a t[...]

  • Seite 173

    7. Press the Start B& W button. If prompted, select where you placed your document (Automatic Document Feeder or scanner glass). Note: To cancel faxing, press the Stop/Reset button. Your product scans your original and prompts you to place additional pages, if necessary. After scanning your originals, your product dials the number and sends the[...]

  • Seite 174

    2. Select your product with the FAX option as the printer. 3. To change the Paper Size, Orientation, Color, Image Quality, or Character Density settings, click the Preferences or Properties button. Note: If you see a Setup , Printer , or Options button, click it. Then click Preferences or Properties on the next screen. For more information about se[...]

  • Seite 175

    6. Enter your sender information so that recipients can identify the origin of the fax. Then click OK to save the sender information. 7. Add a cover sheet, input a fax number, or set up a phone book of numbers for future use, then click Next . Note: For detailed instructions on using the Epson FAX Utility, click Help . 8. If you added a cover sheet[...]

  • Seite 176

    1. Open the file you want to fax. 2. Select the print command in your application. Note: You may need to select a print icon on your screen, the Print option in the File menu, or another command. See your application's help utility for details. 3. Select your product FAX option as the Printer setting. 4. If necessary, click the arrow next to t[...]

  • Seite 177

    7. Do one of the following to choose your recipient: • Select a name or group from the Recipient List . • Enter a name, company, and fax number and click the + button. • Click the icon and select a recipient from your address book. 8. Select Fax Settings from the pop-up menu. You see this window: 177[...]

  • Seite 178

    9. Select the Color and Image Quality settings you want to use for your fax. 10. Click Fax . Parent topic: Sending Faxes Receiving Faxes See these sections to receive faxes with your product. Note: Do not turn the product off while it is receiving a fax. Otherwise, the fax transmission will be lost. Fax Reception Receiving Faxes Automatically (Auto[...]

  • Seite 179

    Note: Do not turn the product off while it is receiving a fax. Otherwise, the fax transmission will be lost. Parent topic: Receiving Faxes Receiving Faxes Automatically (Auto Answer) To receive and print faxes automatically, you can turn on Auto Answer mode. If an answering machine is connected, make sure the product's Rings to Answer setting [...]

  • Seite 180

    2. If you hear a fax tone, select the Receive option and press the OK button. Note: Leave the answered call active as you receive the fax transmission. 3. Follow the instructions on the screen to receive the fax. When fax transmission is finished, you see the previous LCD screen. 4. Hang up the phone. 5. Press one of the Start buttons to print the [...]

  • Seite 181

    Using USB Flash Drives With Your Product Follow the instructions here to work with a USB flash drive inserted into your product. Inserting a USB Flash Drive Removing a USB Flash Drive Transferring Files on a USB Flash Drive Inserting a USB Flash Drive Insert your USB flash drive into the USB port on the front of the product. Parent topic: Using USB[...]

  • Seite 182

    Setting Up File Sharing for File Transfers From Your Computer Before you transfer files from a computer to a USB flash drive inserted into the USB port on the front of your product, you may need to set up your product's file sharing settings. Caution: Remove the flash drive before you change this setting or you may lose data from the flash dri[...]

  • Seite 183

    2. Insert a flash drive into the USB port on the front of your product. 3. Do one of the following to access your flash drive files from your computer: • Windows : Select the Computer or My Computer utility, then select the removable disk icon. • Mac OS X with a USB connection : Look for the removable disk icon on your desktop, then select it. [...]

  • Seite 184

    Replacing Ink Cartridges When an ink cartridge is expended, you need to replace it. You may also need to replace a cartridge that is more than six months old, if your printouts do not look their best, even after cleaning and aligning the print head. Note: Please dispose of your used Epson branded ink cartridges responsibly and in accordance with lo[...]

  • Seite 185

    Note: The display is different depending on which ink cartridges are low or expended, if any. Displayed ink levels are approximate. 3. Do one of the following: • If you are finished, select OK and press the OK button. • If you want to replace an ink cartridge now, select Cartridge Replacement and press the OK button. When you finish replacing c[...]

  • Seite 186

    2. Replace or reinstall any ink cartridge indicated on the screen. Note: Depending on the color of the expended cartridge and how you are printing, you may be able to continue printing temporarily. Note: If any of the cartridges installed in the product is broken, incompatible with the product model, or improperly installed, Epson Status Monitor wi[...]

  • Seite 187

    4. Deselect the See Low Ink Reminder alerts checkbox at the bottom of the screen. 5. To disable promotional offers, deselect the Display Epson Offers checkbox. Parent topic: Check Cartridge Status Related tasks Removing and Installing Ink Cartridges 187[...]

  • Seite 188

    Related topics Printing With Black Ink and Expended Color Cartridges Checking Cartridge Status with Mac OS X You can check your cartridge status using a utility on your Mac. 1. Do one of the following: • Mac OS X 10.6/10.7/10.8 : In the Apple menu or the Dock, select System Preferences . Select Print & Fax or Print & Scan , select your pr[...]

  • Seite 189

    3. Do the following as necessary: • To update the ink cartridge status, click Update . • Replace or reinstall any ink cartridge indicated on the screen. Note: Depending on the color of the expended cartridge and how you are printing, you may be able to continue printing temporarily. Note: If any of the cartridges installed in the product is bro[...]

  • Seite 190

    Related tasks Removing and Installing Ink Cartridges Related topics Printing With Black Ink and Expended Color Cartridges Purchase Epson Ink Cartridges You can purchase genuine Epson ink and paper at Epson Supplies Central at www.epson.com/ink3 (U.S. sales) or www.epson.ca (Canadian sales). You can also purchase supplies from an Epson authorized re[...]

  • Seite 191

    Removing and Installing Ink Cartridges Make sure you have your replacement cartridges handy before you begin. You must install new cartridges immediately after removing the old ones. Caution: Leave your old cartridges in the printer until you are ready to replace them to prevent the print head nozzles from drying out. Do not open ink cartridge pack[...]

  • Seite 192

    2. Lift up the scanner unit. Caution: Do not move the print head by hand; otherwise, you may damage your product. Do not touch the flat white cable inside the printer. Caution: Do not lift up the scanner unit when the document cover is open. 192[...]

  • Seite 193

    3. Squeeze the tab on the cartridge and lift the cartridge straight up to remove it. Note: Dispose of used cartridges carefully. Do not take the used cartridge apart or try to refill it. 193[...]

  • Seite 194

    Warning: If ink gets on your skin, wash it thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. If ink gets into your mouth, spit it out and see a doctor right away. Keep ink cartridges out of the reach of children. 4. Before opening the new cartridge package, shake it gently four or five times. Caution: Do[...]

  • Seite 195

    6. Remove the yellow tape from the side of the cartridge. Caution: Do not remove any other labels or seals, or ink will leak. 7. Insert the new cartridge into the holder and push it down until it clicks into place. 195[...]

  • Seite 196

    8. Lower the scanner unit. 9. Press the OK button. The print head moves to its home position and the printer starts charging the ink. This takes about 90 seconds. When you see a confirmation message on the screen, ink charging is finished. Caution: Never turn off the product while the power light is flashing or you will waste ink. If you see an err[...]

  • Seite 197

    Related tasks Placing Originals on the Scanner Glass Replacing Ink Cartridges Using a Computer Utility You can use the Ink Cartridge Replacement utility to view on-screen instructions for replacing an ink cartridge. This method allows you to replace a cartridge before it is low or expended (if it is too old, for example). 1. Do one of the following[...]

  • Seite 198

    2. Click the Ink Cartridge Replacement icon and follow the on-screen instructions to replace your ink cartridges as necessary. Parent topic: Replacing Ink Cartridges Related concepts Purchase Epson Ink Cartridges Printing With Black Ink and Expended Color Cartridges When a color ink cartridge is expended, you can temporarily continue printing from [...]

  • Seite 199

    Parent topic: Replacing Ink Cartridges Printing With Expended Color Cartridges - Windows If you see a message during printing telling you that you can temporarily print in black ink with an expended color cartridge, you can cancel your print job and select settings to print on plain paper or on an envelope. Note: To use this feature, Epson Status M[...]

  • Seite 200

    2. If you see a message telling you that you can temporarily print with only black ink, click the Delete icon to cancel your print job. Mac OS X 10.8: Click the button to cancel your print job. If an error message is displayed, click the OK button. Note: If the message screen appears on another computer on a network, you may need to cancel the prin[...]

  • Seite 201

    11. Select Print Settings from the pop-up menu. 12. Select Plain Paper/Bright White Paper or Envelope as the paper type setting. 13. Select the Grayscale option. 14. Click Print to print your document. Parent topic: Printing With Black Ink and Expended Color Cartridges Related tasks Selecting Basic Print Settings - Mac OS X Cancelling Printing Usin[...]

  • Seite 202

    Parent topic: Replacing Ink Cartridges 202[...]

  • Seite 203

    Adjusting Print Quality If your print quality declines, you may need to run a utility to clean or align the print head. If running these utilities does not solve the problem, you may need to replace the ink cartridges. Print Head Maintenance Cleaning the Paper Path Related topics Replacing Ink Cartridges Print Head Maintenance If your printouts bec[...]

  • Seite 204

    1. Load a few sheets of plain paper in the product. 2. Press the Menu button. 3. Press the up or down arrow buttons to select Maintenance and press the OK button. You see this screen: 4. Press the up or down arrow buttons to select Nozzle Check and press the OK button. 5. Press one of the Start buttons. After the nozzle pattern prints, you see this[...]

  • Seite 205

    6. Check the printed pattern to see if there are gaps in the lines. Print head is clean Print head needs cleaning 7. Do one of the following: • If there are no gaps, select Finish Nozzle Check and press the OK button. • If there are gaps or the pattern is faint, select Head Cleaning and press the OK button to continue. 205[...]

  • Seite 206

    8. Follow the instructions on the screen to clean the print head, check the nozzles, and repeat the process as necessary. If you don’t see any improvement after cleaning the print head up to 4 times, leave the product turned on and wait at least 6 hours. Then try cleaning the print head again. If quality still does not improve, one of the ink car[...]

  • Seite 207

    4. Click Print . 5. Check the printed pattern to see if there are gaps in the lines. Print head is clean 207[...]

  • Seite 208

    Print head needs cleaning 6. If there are no gaps, click Finish . If there are gaps or the pattern is faint, clean the print head. Parent topic: Print Head Nozzle Check Related concepts Print Head Cleaning 208[...]

  • Seite 209

    Print Head Cleaning If print quality has declined and the nozzle check pattern indicates clogged nozzles, you can clean the print head. Note: You cannot clean the print head if an ink cartridge is expended, and may not be able to clean it when a cartridge is low. You must replace the cartridge first. Cleaning the Print Head Using the Product Contro[...]

  • Seite 210

    4. Press the up or down arrow buttons to select Head Cleaning and press the OK button. You see this screen: 5. Press the OK button to begin the cleaning cycle. Caution: Never turn off the product during a cleaning cycle or you may damage it. The power light flashes throughout the cleaning cycle and stays on green when the cleaning cycle is finished[...]

  • Seite 211

    7. Press one of the Start buttons to run a nozzle check to confirm that the print head is clean. If you don’t see any improvement after cleaning the print head up to 4 times, leave the product turned on and wait at least 6 hours. Then try cleaning the print head again. If quality still does not improve, one of the ink cartridges may be old or dam[...]

  • Seite 212

    4. Click Start to begin the cleaning cycle. The power light flashes throughout the cleaning cycle and stays on when the cleaning cycle is finished. Caution: Never turn off the product during a cleaning cycle or you may damage it. 5. When the power light stops flashing and remains on, you can check to see if the nozzles are clean; click Print Nozzle[...]

  • Seite 213

    Print head needs cleaning • If there are no gaps, click Finish . • If there are gaps or the pattern is faint, click Clean to clean the print head again. If you don’t see any improvement after cleaning the print head up to 4 times, leave the product turned on and wait at least 6 hours. Then try cleaning the print head again. If quality still d[...]

  • Seite 214

    Related topics Replacing Ink Cartridges Print Head Alignment If your printouts become grainy or blurry, you notice misalignment of vertical lines, or you see dark or light horizontal bands, you may need to align the print head. Note: Banding may also occur if your print head nozzles need cleaning. Aligning the Print Head Using the Product Control P[...]

  • Seite 215

    4. Press the up or down arrow buttons to select Head Alignment and press the OK button. You see this screen: 5. Press one of the Start buttons to print an alignment sheet. Note: Do not cancel printing while you are printing a head alignment pattern. You see this screen: 6. Check the printed pattern and press the up or down arrow buttons to choose t[...]

  • Seite 216

    Parent topic: Print Head Alignment Aligning the Print Head Using a Computer Utility You can align the print head using a utility on your Windows computer or Mac. 1. Load a few sheets of plain paper in the product. 2. Do one of the following: • Windows: Right-click the product icon in the Windows taskbar. • Mac OS X 10.6/10.7/10.8 : In the Apple[...]

  • Seite 217

    5. Check the printed pattern and follow the instructions on the screen to choose the number representing the best printed pattern for each set. • After choosing each pattern number, click Next . • If no patterns are aligned in one or more of the sets, choose the closest one in each set and click Realignment . Then print another alignment sheet [...]

  • Seite 218

    2. Use the product control panel to make a copy, but without placing a document on the scanner glass. 3. Check the back of the ejected paper to see if it is clean. 4. Repeat as necessary until the paper comes out clean. Parent topic: Adjusting Print Quality Related topics Copying 218[...]

  • Seite 219

    Cleaning and Transporting Your Product See these sections if you need to clean or transport your product. Cleaning Your Product Transporting Your Product Cleaning Your Product To keep your product working at its best, you should clean it several times a year. Close the output tray and paper support when you are not using the product to protect it f[...]

  • Seite 220

    6. Open the ADF cover and use a soft, dry, lint-free cloth (microfiber is recommended) to clean the rollers and the interior of the ADF. 220[...]

  • Seite 221

    7. Clean the outer case and control panel with a soft, dry, lint-free cloth. Do not use liquid or chemical cleansers. Parent topic: Cleaning and Transporting Your Product Related tasks Cleaning the Paper Path Transporting Your Product If you need to ship your product or transport it a long distance, prepare it for transportation as described here. [...]

  • Seite 222

    Caution: Do not place tape on the white flat cable inside the product; otherwise, you may damage your product. 4. Lower the scanner unit. 5. Remove all the paper from the product. 6. Unplug the power cable. 7. Disconnect any connected cables. 8. Close the output tray and paper support. 9. Place the product in its original packing materials, if poss[...]

  • Seite 223

    Solving Problems Check these sections for solutions to problems you may have using your product. Checking for Software Updates Product Status Messages Running a Product Check Resetting Control Panel Defaults Solving Setup Problems Solving Network Problems Solving Copying Problems Solving Paper Problems Solving Problems Printing from a Computer Solv[...]

  • Seite 224

    Related tasks Changing Automatic Update Options Product Status Messages You can often diagnose problems with your product by checking the messages on its LCD screen. LCD screen message Condition/solution Paper jam Paper is jammed in the product. Remove the jammed paper and follow the steps on the LCD screen to clear the error. Paper jam in the ADF [...]

  • Seite 225

    Related references Paper Jam Problems Document Jams in the Automatic Document Feeder Where to Get Help Related tasks Connecting a Telephone or Answering Machine Running a Product Check Running a product check helps you determine if your product is operating properly. 1. Disconnect any interface cables connected to your product. 2. Load a few sheets[...]

  • Seite 226

    7. Do the following, depending on the results of the product check: • If the page prints and the nozzle check pattern is complete, the product is operating properly. Any operation problem you may have could be caused by your computer, cable, software, or selected settings. Check the other solutions in this book or try uninstalling and reinstallin[...]

  • Seite 227

    You see this screen: 3. Press the up or down arrow buttons to select one of these options and press the OK button. • Fax Send/Receive Settings : Restores all of the default fax settings on the Send Settings , Receive Settings , and Communication screens. • Fax Data Settings : Erases the speed dial list, group dial list, header, and fax log. •[...]

  • Seite 228

    Parent topic: Solving Problems Noise After Ink Installation If you hear noises from your product after installing ink, check the following: • The first time you install ink cartridges, the product must prime its print head. Wait until priming finishes before you turn off the product, or it may prime improperly and use excess ink the next time you[...]

  • Seite 229

    Control Panel Setup Problems If you have problems setting up the control panel, try these solutions: • To view LCD screen text in a different language, select a different language setting for the panel. • To turn off the beep heard when you press a button, turn off the panel's sound setting. This also turns off the dialing sound for sendin[...]

  • Seite 230

    • You may need to disable the firewall and any anti-virus software on your wireless router or access point. • Check to see if access restrictions, such as MAC address filtering, are set on the router or access point. If access restrictions are set, add your product's MAC address to your router's address list. To obtain your product&ap[...]

  • Seite 231

    Related concepts When to Uninstall Your Product Software Product Does Not Appear in Mac OS X Printer Window If your product does not appear in the Mac OS X printer window, try these solutions: • Turn your product off, wait 30 seconds, then turn it back on again. • If you are connecting the product wirelessly via EpsonNet Setup and the WiFi ligh[...]

  • Seite 232

    • If you are connecting the product via EpsonNet Setup and the WiFi light on your product is not solid green , make sure your product software was installed correctly. If necessary, reinstall your software. Parent topic: Solving Network Problems Related tasks Printing a Network Status Sheet Cannot Scan Over a Network If you cannot start Epson Sca[...]

  • Seite 233

    Parent topic: Solving Network Problems Related topics Scanning Printing a Network Status Sheet You can print a network status sheet to help you determine the causes of any problems you may have using your product on a network. 1. Press the Menu button. 2. Press the up or down arrow buttons to select Wi-Fi/Network Settings and press the OK button. 3[...]

  • Seite 234

    Related concepts Print Head Cleaning Print Head Nozzle Check Product Makes Noise When It Sits for a While Your product is performing routine maintenance. This is normal. Parent topic: Solving Copying Problems Solving Paper Problems Check these sections if you have problems using paper with your product. Paper Feeding Problems Paper Jam Problems Doc[...]

  • Seite 235

    Related references Paper Jam Problems Document Jams in the Automatic Document Feeder Paper Loading Capacity Related topics Loading Paper Paper Jam Problems If you have problems with paper jams, try these solutions: 1. Cancel the print job from your computer, if necessary. 2. Gently pull out any jammed paper from the output tray and sheet feeder. 3.[...]

  • Seite 236

    4. Remove any jammed paper or torn pieces. 236[...]

  • Seite 237

    Caution: Do not touch any buttons on the control panel while your hands are inside the product. 5. Lower the scanner unit. 6. Follow the steps on the LCD screen to resume printing. 7. Carefully follow all paper loading instructions when you load new paper. Parent topic: Solving Paper Problems Related references Document Jams in the Automatic Docume[...]

  • Seite 238

    1 ADF cover 2 Paper feeder Caution: Do not remove paper jammed inside the ADF without opening the cover or you could damage the ADF. 4. Leave the ADF cover open, then lift the paper feeder. 238[...]

  • Seite 239

    1 ADF cover 2 Paper feeder 5. Remove any jammed paper or torn pieces. 239[...]

  • Seite 240

    6. Lower the paper feeder (but don't close the ADF cover). 7. Raise the ADF input tray. 8. Carefully remove any jammed paper. 9. Lower the ADF input tray and reload your originals. 240[...]

  • Seite 241

    Caution: Make sure you do not load the ADF beyond its capacity for your paper size. Also make sure the originals you load are not bent, folded, or curled and do not have tape, staples, or other materials that could obstruct the feeder. 10. Follow the prompts on the LCD screen to clear any error messages. Parent topic: Solving Paper Problems Paper E[...]

  • Seite 242

    Nothing Prints If you have sent a print job and nothing prints, try these solutions: • Make sure your product is turned on. • Make sure any interface cables are connected securely at both ends. • If you connected your product to a USB hub, make sure it is a first-tier hub. If it still does not print, connect your product directly to your comp[...]

  • Seite 243

    Product Icon Does Not Appear in Windows Taskbar If you do not see your product icon in the Windows taskbar, first try restarting your computer. If that does not work, try this solution: 1. Do one of the following: • Windows 8 : Navigate to the Start screen, right-click the screen and select All apps . Select Control Panel > Hardware and Sound [...]

  • Seite 244

    Related topics Replacing Ink Cartridges Printing is Slow If printing becomes slow, try these solutions: • Make sure your system meets the requirements for your operating system. If you are printing a high- resolution image, you may need more than the minimum requirements. If necessary, increase your system's memory. • If you are using Wind[...]

  • Seite 245

    Selecting Basic Print Settings - Mac OS X Solving Page Layout and Content Problems Check these sections if you have problems with the layout or content of your printed pages. Inverted Image Too Many Copies Print Blank Pages Print Incorrect Margins on Printout Border Appears on Borderless Prints Incorrect Characters Print Incorrect Image Size or Pos[...]

  • Seite 246

    Related tasks Selecting Basic Print Settings - Windows Selecting Basic Print Settings - Mac OS X Blank Pages Print If blank pages print unexpectedly, try these solutions: • Make sure you selected the correct paper size settings in your printing program and printer software. • If a blank page exists in a document you are printing and you want to[...]

  • Seite 247

    Related topics Loading Paper Border Appears on Borderless Prints If you see a border on borderless prints, try these solutions: • Make sure you are printing on a compatible borderless paper type and size. Note: Do not select a custom paper size for borderless prints. • Windows : Make sure you selected the Borderless setting in your printer soft[...]

  • Seite 248

    • Windows 7 : Click and select Devices and Printers . Right-click your product name, select See what's printing , and select your product name again, if necessary. Right-click the stalled print job, click Cancel , and click Yes . • Windows Vista : Click and select Control Panel . Click Printer under Hardware and Sound , right-click your pr[...]

  • Seite 249

    Slanted Printout If your printouts are slanted, try these solutions: • Slide the edge guide against the edge of the paper. • Select a higher print quality setting in your printer software. • Align the print head. • Make sure the product is not printing while tilted or at an angle. Parent topic: Solving Page Layout and Content Problems Relat[...]

  • Seite 250

    • Make sure the paper type setting matches the type of paper you loaded. • Make sure you loaded the printable side of the paper correctly for your product. • Turn off any high speed settings in your product software. • Align the print head. • You may need to replace the ink cartridges. Parent topic: Solving Print Quality Problems Related [...]

  • Seite 251

    • If you print on both sides of a sheet of paper, smudges may appear on the reverse side of heavily saturated or dark images. If one side of a sheet will contain a lighter image or text, print that side first. • Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. • Align the print h[...]

  • Seite 252

    • Make sure your paper is not damp, curled, old, or loaded incorrectly in your product. • Align the print head. • Clean the paper path. Parent topic: Solving Print Quality Problems Related concepts Print Head Cleaning Print Head Nozzle Check Print Head Alignment Related references Paper or Media Type Settings Related tasks Selecting Basic Pri[...]

  • Seite 253

    Print Head Alignment Related tasks Selecting Basic Print Settings - Windows Selecting Additional Layout and Print Options - Windows Selecting Basic Print Settings - Mac OS X Selecting Printing Preferences - Mac OS X Related topics Loading Paper Incorrect Colors If your printouts have incorrect colors, try these solutions: • Make sure the Black/Gr[...]

  • Seite 254

    Solving Scanning Problems Check these solutions if you have problems scanning with your product. Scanning Software Does Not Operate Correctly Cannot Start Epson Scan Parent topic: Solving Problems Scanning Software Does Not Operate Correctly If your scanning software does not operate correctly, try these solutions: • Make sure your computer has a[...]

  • Seite 255

    Windows 8 : Navigate to the Start screen and select EPSON Scan Settings . Make sure the correct Connection setting is selected, then click the Test button. Windows (other versions) : Click or Start > All Programs or Programs > EPSON > EPSON Scan > EPSON Scan Settings . Make sure the correct Connection setting is selected, then click the[...]

  • Seite 256

    Scanned Image Colors Do Not Match Original Colors Scan Area is Not Adjustable in Thumbnail Preview Scanned Image Edges are Cropped Parent topic: Solving Problems Related topics Solving Print Quality Problems Image Consists of a Few Dots Only If your scanned image consists only of a few dots, try these solutions: • Make sure you placed your origin[...]

  • Seite 257

    Straight Lines in an Image Appear Crooked If straight lines in an original appear crooked in a scanned image, make sure to place your original straight when you scan it. Parent topic: Solving Scanned Image Quality Problems Related topics Placing Originals on the Product Image is Distorted or Blurry If a scanned image appears distorted or blurry, tr[...]

  • Seite 258

    • Brightness • Histogram Adjustment • Check the brightness and contrast settings of your computer monitor. Parent topic: Solving Scanned Image Quality Problems Related topics Selecting Epson Scan Settings Back of Original Image Appears in Scanned Image If an image from the back of a thin original appears in your scanned image, place a piece o[...]

  • Seite 259

    Check the color matching and color management capabilities of your computer, display adapter, and the software you are using to see if they are affecting the palette of colors you see on your screen. To adjust the colors in your scanned image, adjust these Epson Scan settings (if available) and try scanning again: • Change the Image Type setting [...]

  • Seite 260

    Cannot Send or Receive Faxes Cannot Receive Faxes with a Telephone Connected to Your Product Parent topic: Solving Problems Cannot Send or Receive Faxes If you cannot send or receive faxes, try these solutions: • Make sure the recipient's fax machine is turned on and working. • Make sure paper is loaded correctly in your product. • Make [...]

  • Seite 261

    Related tasks Receiving Faxes Automatically (Auto Answer) Connecting a Telephone or Answering Machine Printing Fax Reports Selecting Fax Communication Settings Related topics Loading Paper Placing Originals on the Product Cannot Receive Faxes with a Telephone Connected to Your Product Make sure your telephone is connected to your product's EXT[...]

  • Seite 262

    When to Uninstall Your Product Software If you have a problem that requires you to uninstall and re-install your software, follow the instructions for your operating system. Uninstalling Product Software - Windows Uninstalling Product Software - Mac OS X Parent topic: Solving Problems Uninstalling Product Software - Windows You can uninstall and th[...]

  • Seite 263

    5. Do one of the following to uninstall Epson Scan, then follow any on-screen instructions: • Windows 8 , Windows 7 , or Windows Vista: Select EPSON Scan and click Uninstall/Change . • Windows XP : Select EPSON Scan and click Change/Remove . 6. Restart your computer, then see the Start Here sheet to re-install your software. Note: If you find t[...]

  • Seite 264

    Internet Support Visit Epson's support website at www.epson.com/support (U.S.) or www.epson.ca/support (Canada) for solutions to common problems. You can download drivers and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions. Speak to a Support Representative Before you call Epson for support, please have [...]

  • Seite 265

    Technical Specifications These sections list the technical specifications for your product. Note: Epson offers a recycling program for end of life products. Please go to www.epson.com/recycle for information on how to return your products for proper disposal. EPEAT Registration Windows System Requirements Mac System Requirements Printing Specificat[...]

  • Seite 266

    Windows System Requirements To use your product and its software, your computer should use one of these Microsoft operating systems: • Windows 8 • Windows 7 • Windows Vista • Windows XP Professional x64 Edition • Windows XP SP3 Note: Visit Epson's support website at www.epson.com/support (U.S.) or www.epson.ca/support (Canada) for th[...]

  • Seite 267

    Related references Paper Loading Capacity Scanning Specifications Scanner type Flatbed, color Photoelectric device CIS Effective pixels 10,200 × 14,040 pixels at 1200 dpi Scanning area may be restricted if resolution setting is large. Document size Maximum: 8.5 × 11.7 inches (216 × 297 mm) Scanner glass: US letter or A4 Scanning resolution 1200 [...]

  • Seite 268

    Parent topic: Technical Specifications Fax Specifications Fax type Black-and-white and color fax capability Support line Household phone line Speed Up to 33.6 kbps Resolution Monochrome Standard: 203 × 98 dpi Fine: 203 × 196 dpi Photo: 203 × 196 dpi Color Fine: 200 × 200 dpi Photo: 200 × 200 dpi Error correction mode CCITU/ITU Group 3 fax with[...]

  • Seite 269

    Single-sheets Size A4 (8.3 × 11.7 inches [210 × 297 mm]) 4 × 6 inches (102 × 152 mm) 5 × 7 inches (127 × 178 mm) A6 (4.1 × 5.8 inches [105 × 148 mm]) A5 (5.8 × 8.2 inches [148 × 210 mm]) B5 (182 × 257 mm) 3.5 × 5 inches (89 × 127 mm) 5 × 8 inches (127 × 203 mm) 8 × 10 inches (203 × 254 mm) 16:9 wide (4 × 7.1 inches [102 × 181 mm][...]

  • Seite 270

    Single sheets 1 Top: 0.12 inch (3 mm) minimum 2 Left: 0.12 inch (3 mm) minimum 3 Right: 0.12 inch (3 mm) minimum 4 Bottom: 0.12 inch (3 mm) minimum Envelopes 270[...]

  • Seite 271

    1 Left: 0.12 inch (3 mm) minimum 2 Bottom: 0.20 inch (5 mm) minimum 3 Top: 0.20 inch (5 mm) minimum 4 Right: 0.83 inch (21 mm) minimum Parent topic: Technical Specifications Ink Cartridge Specifications Note: We recommend that you use genuine Epson cartridges and do not refill them. The use of other products may affect your print quality and could [...]

  • Seite 272

    Dimension Specifications Height Stored: 8.7 inches (221 mm) Printing: 11.5 inches (291 mm) Width Stored: 15.4 inches (392 mm) Printing: 15.4 inches (392 mm) Depth Stored: 14.8 inches (377 mm) Printing: 21.3 inches (540 mm) Weight 13.0 lb (5.9 kg) (without ink cartridges) Parent topic: Technical Specifications Electrical Specifications Power supply [...]

  • Seite 273

    Environmental Specifications Temperature Operating: 50 to 95 ºF (10 to 35 ºC) Storage: –4 to 104 ºF (–20 to 40 ºC) 1 month at 104 ºF (40 ºC) Humidity Operating: 20 to 80% RH (non-condensing) Storage: 5 to 85% RH Parent topic: Technical Specifications Interface Specifications Interface type Hi-Speed USB (Device Class for computers) Hi-Spee[...]

  • Seite 274

    Wireless Communication Infrastructure mode mode Ad hoc mode Ethernet standard IEEE802.3i/u IEEE802.3az (the connected device should comply with IEEE802.3az) Ethernet Communication 100BASE-TX/10BASE-T mode Note: Wireless LAN standard complies with either IEEE 802.11 b/g or IEEE 802.11 b/g/n, depending on purchase location. Parent topic: Technical Sp[...]

  • Seite 275

    Notices Check these sections for important notices about your product. Note: Epson offers a recycling program for end of life products. Please go to www.epson.com/recycle for information on how to return your products for proper disposal. FCC Compliance Statement Software Notices Trademarks Copyright Notice FCC Compliance Statement For United State[...]

  • Seite 276

    The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service. If you have problems with this product and require techn[...]

  • Seite 277

    interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or mor[...]

  • Seite 278

    Software Notices OPEN SOURCE SOFTWARE LICENSE 1. This printer product includes open source software programs listed in Section 6) according to the license terms of each open source software program. 2. We provide the source code of the GPL Programs, LGPL Programs and Apache License Program (each is defined in Section 6) until five (5) years after t[...]

  • Seite 279

    netbase-4.29 psmisc-21.5 readline-libs-5.0 sysvinit-2.86 udev-0.093 udhcp 0.9.8cvs20050124-5 util-linux-2.12 usb8786 GNU LGPL This printer product includes the open source software programs which apply the GNU Lesser General Public License Version 2 or later version ("LGPL Programs"). The list of LGPL Programs: uclibc-0.9.29 libusb-libs-0[...]

  • Seite 280

    This printer product includes the open source software programs which apply the Berkeley Software Distribution License ("BSD Programs"). The list of BSD Programs: busybox-1.2.2.1 util-linux-2.12 mount-2.12 mvlutils-2.8.4 netkit-ftp-0.17 netkit-base-0.17 portmap-5beta Sun RPC License This printer product includes the open source software p[...]

  • Seite 281

    This printer product includes the open source software program "ARC4" which applies the terms and conditions provided by owner of the copyright to the "ARC4". json_parser license This printer product includes the open source software program "json_parser" which applies the terms and conditions provided by owner of the [...]

  • Seite 282

    Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with [...]

  • Seite 283

    THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY [...]