Enviro 2100 Freestanding Bedienungsanleitung

SHERWOOD INDUSTRIES IS AN ENVIRONMENT ALL Y RESPONSIBLE COMP ANY . THIS MANUAL IS PRINTED ON RECYCLED P APER. BY: SHERWOOD INDUSTRIES LTD O WNER ’S MANU AL PLEA SE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE W o o d S t o v e 2100 Freestanding PLEASE READ THIS ENTIRE MANUAL BEFORE INSTALLATION AND USE OF THIS WOOD BURNING ROOM HEATER. FAILURE TO[...]

Safety Prec autions FOR SAFE INST ALLA TION AND OPERA TION OF Y OUR “ENVIRO” WOODST O VE, PLEASE CAREFULL Y READ THE FOLL OWING INFORMA TION: ● Please read this entire manual befor e you install and use your new heater . F ailure to follow these instructions may result in propert y damage, personal injury , and even death. ● If this applian[...]

T able of Contents 3 Safety Precautions.........................................................................................................2 T able of Contents...........................................................................................................3 Operating Instructions.......................................................[...]

Oper a ting Instructions FIRST START When rst installed, the chimney , rebricks and steel are cold and it usual ly takes several hours on a fairly high burn for them to become hot and dry enough for the stove to function well. The paint wi ll smell a little for the rst time or two as i t cures. Y ou may wish to open a door or window to eli[...]

CHIMNEY OR RUN AWAY FIRE: 1. Call local re department (or dial 911) 2. Close the draft f ully 3. Examine ue pipes, chimney , attic, and roof of the house, to see if any part has become hot enough to catch re. If necessary spra y with re extinguisher or water fr om the garden hose. 4. Do not oper ate the stove again until you are certain[...]

6 Oper a ting Instructions 3. Refueling the Stove: Use a long pair of gloves (barbecue gloves) when feeding the re because these sto ves burn at the front they are clean and efcient, but they are also very hot and gloves are useful. K eep a small steel shovel and whisk nearby for moving a log or l ifting a fallen ember and for k eeping the he[...]

7 Oper a ting Instructions 2. What type of wood is best to use as rewood? Both hardwood and softwood burn wel l in this stove. Both woods contain about 8,000 B TU/lb (18,570 KJ/Kg), but hardwood is generally denser , will weigh mor e per cor d, and burns a little slower and longer . Cutting rewood so that it will t horizontally , front to [...]

Smok e path Dr y seasoned wood Primar y air window wash. Primar y air enter s at bottom, trav els up the side vertical risers and down the window . Bottom (primar y) air outlet. Single rod contr ols for both openings. Double layer of Claybur n. Insulated bric ks keep a high temperatures below to bur n up smoke. Secondar y air intake. Primar y air i[...]

9 Specific a tions W OOD STOVE S PECIFICATIONS : Model 2100 Freestanding Width x Depth 24” x 30” (610 mm x 762 mm) Height with pedestal or legs 33” (838 mm) Height of body 22” (559 mm) Fire box size (depth x width x height) 21” x 18” x 12” (546 mm x 457 mm x 305 mm) Capacity 3.1 feet 3 (0.0878 meter 3 ) * Approximate heating area 2[...]

Inst alla tion Please read and understand these instructions before installing pedestal or ash pan and leg option. F ailure to follow these instructions carefully could cause personal injury or property damage.All screws are pre installed on the base of the unit. P EDESTAL I NSTALLATION : L EGS A ND A SH P AN I NSTALLATION : • Remove the bricks f[...]

11 Inst alla tion C HIMNEY I NSTALLATION T HROUGH W ALL : Here are four methods of combustible wall chimney connector pass-throughs. This information was provided from NFPA 211. Method A . 12” (304.8 mm) Clearance to Combustible Wall Member: Using a minimum thickness 3.5” (89 mm) brick and a ” (15.9 mm) minimum wall thickness clay liner , [...]

Inst alla tion I NSTALLATION : A non-combustible oor protector is required under all freestanding uni ts, refer to “Clearances T o Combustibles - Freestanding” . When venting into a masonry chimney the oor protector must be installed directly below the chimney vent and 2” (50.8 mm) on either side of the chimney v ent. V ent the stove in[...]

13 Inst alla tion O UTSIDE A IR : A 4” (10.2 cm) fresh air adapter kit is av ailable. This adapter can be instal led either on the back pedestal or through the oor under the pedestal. Place the ” mesh screen between the fresh air adapter and the body of the pedestal (as shown to right). NOTE: Fresh air connection to the unit must be a non[...]

Inst alla tion B RICK P LACEMENT : COMPLETE THE STOVE AND SMOKE PIPE INSTALLATION BEFORE PLACING THESE BRICKS. 1. Place the bottom lay ers of the sides and back of the rebox. 2. Place the oor bricks. The spaces between the bricks will soon ll with ashes. 3. Finish the sides and back ready to accept the top , ceiling bricks. 4. On the right[...]

15 Inst alla tion D OOR I NSTALLATION : Remo ve the door from the packaging. Inspect the door assembly for damage. DO NOT USE DOOR IF GLASS IS BROKEN. Place the door assembly on the two (2) hinge pins mounted on the body of the unit. Open and close the door , applying pressure down, to ensure the door assembly is properly seated on the hinges. ?[...]

CAUTION Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing. 1) Remov e the fan assembly from the box and inspect for any damage to the assembly . Contact your dealer or courier if there is damage. 2) Remove the knock out at the bottom of t[...]

17 P ar ts List Ref erence Number Description Part Number 1 120ºF (49ºC) Ceramic F an T emperature Sensor EC-001 Domestic Power Cord - 115V EC-042 2 Convection Blower - 115V EC-069 3 F an Controller With Knob - 115V EF-045 Door Gasket - 7 feet (2.1 m) EF-168 4 Brick - 3” X 9” EF-169A 4 Brick - 4” X 9” EF-169B 4 Brick - 4” X 4?[...]

P ar ts Diagr am 18                             [...]

19 W arr anty Sherwood Industries Ltd. is the manufacturer of the Enviro line of heating products. At Sherwood Industries, our commitment to the highest level of quality and customer service is the most important thing we do. Each Enviro stove is built on a tradition of using only the nest materials and is backed by our Exclusive Lifetime Limite[...]

W arr anty 5. If Sherwood Industries Ltd. determines that the stove needs to be returned to Sherwood Industries Ltd. for repair , the customer has the responsibility and the expense of removing it from their home and shipping it to Sherwood Industries Ltd. If the problem is covered by the Warr anty , Sherwood Industries Ltd. will replace the item a[...]

W arr anty d) Salt air in coastal areas or high humidity can be corrosive to the nish; these environments can cause rusting. Damage caused by salt air or high humidity is not cov ered by the Limited W arranty . 13. Exclusions to the Limited W arranty include: injury , loss of use, damage, failure to function due to accident, negligence, misuse, [...]

22 Inst alla tion Da t a Sheet The following information must be recorded by the installer for w arrant y purposes and future r eference. NAME OF OWNER: _________________________________________ ADDRESS: _________________________________________ _________________________________________ _________________________________________ PHONE:______________[...]