Baumatic B260.1SS-A Bedienungsanleitung

1 B260.1SS-A 60cm Multifunction built in oven.[...]

User Manual for your Baumatic B260.1SS-A 60 cm Multifunction built in oven NOTE : This User Instruction Manual contains imp ortant information, including safety & installation p oints, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available fo r future reference; for you or any [...]

3 Contents E n v i r o n m e n t a l n o t e 4 Important safety informa tion 5 – 7 S p e c i f i c a t i o n s 8 Product and aperture dimensions 8 P r o d u c t s p e c i f i c a t i o n s 8 S t a n d a r d a c c e s s o r i e s 8 O p t i o n a l e x t r a s 8 E l e c t r i c a l d e t a i l s 9 C o n t r o l p a n e l 9 Oven programmer/timer dis[...]

Environmental note 4 o The packaging materials that Baum atic uses are environmentally friendly and can be recycled. o Please discard all packaging mate rial with due regard for the environment.[...]

IMPORTANT SAFETY INFORMATION Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the info rmation contained in this booklet, please contact the Baumatic Technical Department. General Information o This appliance is[...]

6 Warning and safety instructions o This appliance complies with all current European safety legislation. Baumatic do wish to emphasise that this compliance does not remove the fact that the appliance surfaces will become hot during use and re tain heat after operation. Child Safety o Baumatic strongly recommend that babies and young children are p[...]

Installation This appliance must be correctly installed by a suitably qualified person, strictly in accordance with the manufacturer’s instructions. o Baumatic Ltd. declines any responsibility for injury or damage, to person or property , as a result of improper use or installation of this appliance. o Heat, steam and moisture will be created dur[...]

Specifications Product Dimensions Height: 596 mm Width: 596 mm Depth: 545 mm Aperture Dimensions Height: 585 mm Width: 560 mm Depth: 560 mm Product specifications o 9 functions o Energy efficiency class: A o Mark resistant coating o Oven capacity: 65 litres o Side opening reversible door o LED full programmer o Cooling fan o Thermostatically contro[...]

Electrical details Rated Voltage: 230 Vac 50 Hz Supply Connection: 16 A (double pole switched fused outlet with 3mm contact gap) Max Rated Inputs: 3.6 kW Mains Supply Lead: 3 x 1.5 mm² Oven Light Bulb: 25 W/300°C screw type pigmy For future reference please record the following information which can be found on the Rating Plate and the date of pu[...]

Oven programmer/timer display 12) “Auto” function symbol 13) “Minute minder” symbol 14) “Manual operation” symbol. Setting and using the oven programmer/timer Selecting manual operation mode After your appliance is connected to your mains supply for the first time, the numbers on the ti mer display will flash. Before you can select a co[...]

11 o You should make sure that any windows in the room are left open during this process. o It is advisable for you not to remain in the room whilst the burning off process is taking place. o You should leave the oven on maximum setting for 30 – 40 minutes. Setting the minute minder function You are able to set the minute mi nder at any time, reg[...]

12 o Press the “duration” button (5) and the display will show a value of 00:00. Set the period of time that you wish the duration function to countdown for, by using the “minus” (8) and “plus” (9) buttons. o Once the display has got to your desired countdown time, let go of the “minus” and “plus” butt ons. The countdown will st[...]

13 o Once the display has got to the time of day that you want the oven to stop cooking at, let go of the “minus” and “plus” buttons. The countdown will star t immediately and the word AUTO symbol will appear on the timer display. o When the time is set, it can be modified by pressing the “minus” and “plus” buttons. o When the time [...]

o The oven will calculate what time it needs to switch on at, so that your food will cook for the le ngth of time that you selected. It will automatically switch itself on, once it reaches the time of day that it has calculated. o When the time of day reaches the end of cooking time that you set, the oven will switch off an d an alarm will sound. T[...]

There are nine cooking functions a vailable on your appliance: OVEN LIGHT: Separate light control whic h allows the light to be switched on, even when th e oven is switched off. 15 ype DEFROST MODE: The fan runs without heat to reduce the defrosting time of frozen foods. The time required to defrost the food will depend on the room temp erature, th[...]

Thermostat control knob The oven thermostat contro l knob sets the required temperature of the oven. It is possible to regulate the temperature within a range of 50 - 250°C. Turn the control knob clockwise. Oven operating light This light will come on to indicate that the oven’s heating elements are in operation. The light will turn of f when th[...]

17 o Place cooking trays in the centre of the oven and leave gaps between the trays to allow air to circulate. o Try to open the door as little as possible to view the dishes. o The oven light will remain on during cooking. Warnings o Keep the oven door closed wh en using either of the grill functions. o Do not use aluminium foil to cover the grill[...]

Cleaning and maintenance Cleaning operations must only be carried ou t when the oven is cool. The appliance should be disconnected from your mains supply before commencing any cleaning process. o The oven should be th oroughly cleaned before it is operated for the first time and after each use. This will avoid residual food stuffs becoming baked on[...]

Removable oven roof liner o Your appliance is supplied with a ro of liner, which should be slid over the top of the grill element. o Once you have finished cooking, the liner should be removed and thoroughly cleaned after ea ch use of the appliance. o Do not allow fat and grease to build up on the oven liner, as this could cause a fire hazard. Repl[...]

INSTALLATION The installation must be carried out by a suitably qualified person, in acco rdance with the current version of the following. o UK Regulations and Safety Stan dards or their European Norm Replacements. o Building Regulations (issued by the Department of the Environment). o Building Standards (issued by the Scottish Development Departm[...]

Reversing the door of your appliance IMPORTANT: This operation must be only carried out by a suitably qualified person. Baumatic Ltd. do not recommend that a customer completes this operation. o It is necessary to disconnect the oven from the mains before executing the operations described in the present manual. o Please read this text thorough ly [...]

2) Loosen the screws that fix the control panel. These can be found in the following positions:- o On the stainless steel sides of the oven. o On the base of the control panel (where the ventilation slots are cut out). 3) IMPORTANT: Support the ov en door from the underneath whilst attempting the next stage. o Rotate the control panel as shown whil[...]

4) Unscrew the fixing plate (A) and fix it to the ot her side of the oven using the screws that you have just removed. The new position of the fixing plate is indicated by the arrow with the letter A next to it. o Remove the bottom pivot (B) from the left lower holder and place it in the right lower holder . The new position of the bottom pivot is [...]

IMPORTANT: When the above steps have been followed, it is necessary to reassemble all of the components. o You should pay particular attention to the wiring, it is important to make sure that no wiring ha s been damaged during the door reversal operation. o You should ensure that all the electrical components and the oven programmer work correctly [...]

o Ensure that the oven has been securely fixed into the housing unit. The fixing of the oven into the housing is made by using four screws. These should be screwed through the oven cabinet and into the housing unit. My appliance isn’t working correctly o The oven isn’t coming on. * Check that the oven is in manual operation mode. * Check that y[...]

o My food is not cooking properly * Ensure that you are selecting the correct temperature and the correct cooking function for the food th at you are cooking. It may be appropriate to adjust yo ur cooking temperature by plus or minus 10°C, to achieve the best cooking results. o My food is not cooking evenly * Check that the oven has been installed[...]

27 The appliance must be accessibl e for the engineer to perform any necessary repair. If your a ppliance is installed in such a way that an engineer is concer ned that damage will be caused to the appliance or your kitchen, t hen he will not complete a repair. This includes situations where appliances have been tiled in, sealed in with sealant, ha[...]

28 Baumatic Ltd. Conditions of guarantee Dear Customer, Your new Ba umatic appliance com es complete with a free 12 month guarantee cove ring bot h parts an d labour costs resulting from defective materials or workmanship. Baumatic also gives you the opportun ity to automatically extend the guarantee period for a further 12 months at no extra cost,[...]

Headquarters Baumatic Ltd. Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX, United Kingdom Sales Telephone +44 118 933 6900 Sales Fax +44 118 931 0035 Service Telephone +44 118 933 6911 Service Fax +44 118 986 9124 Spares Telephone +44 118 933 6922 Technical / Advice Telephone +44 118 933 6933 E-mail : sales@baumatic.co.uk technical@b[...]

30[...]

31[...]

32[...]