Barco RS976986/08 Bedienungsanleitung

FLM HD1 8 Users manual R9004450 R5976986/08 15/03/2010[...]

Barco nv E vents Noordlaan 5, B-8 520 Kuurne Phone: +32 56.36.82.11 Fax: +32 56.36.88.24 E-mail: sales.events@barco.com Visit us at the web: www.barco.com Printed in Belgium[...]

Changes Barco provides this manual ’as is’ without warranty of any kind, either expressed or implied, including but not limited to the implied war- ranties or merchantability and fi tness for a particular purpose. Barco may m ake improvements and/or changes to the product(s) and/or the program(s) described in this publication at any time witho[...]

This software and the accompanying fi les are sold “as is” and without warranties as to perfor mance or merchantability or any other war- ranties whether expressed or implied. I n no event shall Barco be liable for damage of any kind, loss of data, loss of pro fi ts, business interruption or other pecuniary loss arising directly or indirectly[...]

Tabl e of c ont ents T ABLE OF C ONTEN TS 1 . S a f e t y ...... ...... .... ...... .... ...... .... ...... .... ...... .... ...... .... ...... .... ...... .... ...... .... ...... .... ...... . 5 1.1 General ..................... ............... ...................... ............... ....................... ............... ................ 5 1.2 Im[...]

Tabl e of co nt ents 8 . I n p u t m e n u ..... .... ...... .... ...... .... ...... .... ...... .... ...... .... ...... .... ...... .... ...... .... ...... .... ......5 9 8.1 Ove rv iew fl o w............... ...................... ............... ............... ....................... ............... ............... 5 9 8.2 Slot module type ....[...]

Tabl e of c ont ents 12.5 Warp geometry settings ........... ....................... ............... ...................... ............... ......................1 1 9 12.5.1 About Warp geometry settings ............ ............... ....................... ............... ...................... .......1 1 9 1 2 . 5 . 2 W a r p S t a t u s .. ......[...]

Tabl e of co nt ents 14. 9 Re fi ll mode . . . ............... ...................... ............... ....................... ............... ...................... ....... 1 7 4 1 4 . 1 0 B r o a d c a s t m o d e ........................... ...................... ............... ....................... ............... ....... ....... 1 7 5 1 4 .[...]

1. Safety 1. SAFETY About this chapter Read this c hapter att entively . It contains im portant information t o prevent personal injury while installing and us ing an FLM HD18 projector . Furthermore, it includes several cautions to prevent damage to the FLM HD18. Ensu re that you understand and follow all safety guidelines, safety instructi ons an[...]

1. Safety Product article n umber Product serial num ber Dealer 1.2 Important safety instructions T o p revent t he risk of ele ctrical sho ck • This product should be operated from a mono phase AC power s ource. Power input voltage range must be between 200-240 V AC, 50–60 H z, 20 amps at 230 V AC • The power cord of the FLM HD 18 is equippe[...]

1. Safety • When mounting the projector t o the ceiling or t o a rigging s ystem, always mount security chai ns. • W arning: Protection from ultraviolet radiation : Do not look dir ectly in the light beam. The lamp c ontained in this product is an intense source of light and heat. One component of the light emitted from this lam p is ultraviole[...]

1. Safety On servici ng • Do not attempt to service thi s product yourself, as opening or removing covers may expose you to dangerous voltage potential s and risk of electric shock. • Refer all s ervicing t o quali fi ed service personnel. • Fence off a res tricted area of at l east 3 meters around t he projector using an eye-catching f ence[...]

2. Gener al 2. GENERAL About this chapter Read this chapter before inst alling your FLM HD18. It contains important inform ation concerning install ation requirements for the FLM HD18, s uch as minimum and maxim um allowed ambient temper ature, hum idity conditions, required safety area around the installed projec tor , required power net , compati[...]

2. Gener al Screens are rated by how much light they re fl ect (or t ransmit in the case of rear projection systems) given a determined amount of li ght projected toward them. The ‘G AIN’ of a screen is the ter m used. Front and rear screens are bot h rated i n terms of gain. The gain of screens range from a white m atte screen with a gain o f[...]

2. Gener al 3. R emove the carton box, the inner carton sleev e and the foam around the pr ojector . See imag e 2-2. Note: The projector is still att ached to a wooden plate, which is det ached from the below pallet. 4. G ently turn the projector upside down to gain a ccess to the four bolt s, which secure the projector . Not e that this wooden pla[...]

2. Gener al 2.4 FLM fl ight case Introduction of the FLM fl ight case The FLM fl ight case is designed to transport the FLM HD18 in a safe and secure manner . The four caster wheels, provided with breaks, and the eight handles make the FLM fl ight case easy to handle. The fl oor of the fl ight case wagon is equipped with two small covered c o[...]

2. Gener al F/C AUDIENCE F/T FLOOR SCR EEN Image 2-6 Rear projection The projector is installed, either in a table mount or ceiling mount con fi guration, at th e other si de of the screen opposite the audience. AUDIENCE BACKSTAGE R/C R/T FLOOR S C R E E N Image 2-7 R5976986 FLM HD18 15/03/2010 13[...]

2. Gener al Positionin g the projector FLOOR SCR EEN SCR EEN PD A CD SCREEN SW SW SH B SH B CD Image 2-8 The projector should be installed at right angles (horizontally and vertically) to the screen at a distance PD. Note the distance (A) between lens centre and table s urface is slight ly variable. This distance (A) is nominal 35 c m in case all f[...]

2. Gener al U +110% -110% -52% +52% D L R P F U D SIDE VIEW P F +110% -110% TOP VIEW P F L R -52% +52% Image 2-9 PD M D . F F ield of vi ew. It’ s m echanical possible to shift outside the recommended fi eld of view ( ±120% UP/DO WN and ±70% LEFT/ RIGHT), but this wil l resul t in a sli ghtly de cli ne of image qual ity dep ending on the us ed[...]

2. Gener al 2.6 Projector air inlets and out lets Air inlets and outlets Image 2-1 1 The FLM HD18 has 5 air inlet channels and one air outl et. The air outlet is located at the rear of the projector . The air inlets a re located at the f ront, bottom, top and right side of the pr ojector . 2.7 Free download of Projector T oolset About Projector T o[...]

3. Physical i nstal lation 3. PHYSICAL INST ALLA TION About this chapter This chapter explains how to install and set up your FLM projector . If you are familiar w ith the projector and wa nt to quickly set it up for temporary use, follow the “Quick setup” instructions below . For a more com plete setup, follow the instructi ons and guides cove[...]

3. Physical i nstal lation C XLR adapto r . Overview • RCU battery i nstallation • RCU rugged case installation • RCU XLR adaptor installation • Using the XLR adaptor of the RCU • RCU usage p ossibilities 3.1.1 RCU batt ery install ation Where t o fi nd the batteries for the remote c ontrol ? The batteries are not plac ed in the remote c[...]

3. Physical i nstal lation 3.1.2 RCU rugged case installation How to install the rugged case of the re mote control ? 1. S lide the bottom of the R CU into the rugged case and then pull the top of the rugged cas e over the top of the RCU as illustrated. Image 3-5 3.1.3 RCU XLR ada ptor installation Install the rugged case before installing the XLR [...]

3. Physical i nstal lation Image 3-7 3.1.5 RCU usa ge possibil ities Summarized p ossibiliti es Ref. Possibility descri ption Comment a. RCU not wired b. RCU wired (mini-jack) Backlight illuminates continuously when wire i s connected. Infra red disabled. c. RCU with rugged case not wi red d. RCU with rugged case wired (mini-jack) Backlight illumin[...]

3. Physical i nstal lation 3.2 Le nses Overview • Available l enses • Lens selection • Lens formulas • Lens installation • Lens removal 3.2.1 Available lenses A vailable lenses for the FLM HD1 8 projector The TLD and the TLD HB (High Br ightness) lens series can be used on the FLM H D18 projector . Note that there is no physical diff eren[...]

3. Physical i nstal lation Image 3-15 R9840910 : TLD zo om l ens (5 .0 - 8.0 : 1 ) ; R9842120 : TLD HB zoom lens (5. 0 - 8.0 : 1) Image 3-16 R9829997: TLD+ zoom l ens (7.5 - 1 1.2 : 1) 3.2.2 Lens se lection How to select the right lens for your application ? 1. D etermine the required screen width (SW). 2. D etermine the position of the projector i[...]

3. Physical i nstal lation Lens Throw r ati o for FLM HD Metr ic formu las (mete r) Inch fo rmu las (inc h) TLD (5.0 – 8.0 : 1) T L DH B( 5 . 0–8 . 0 :1 ) 4.35 – 6.95 PD min = (4.17 x SW ) - 0.01 PD ma x = (6.95 x SW ) - 0.29 PD mi n = (4.17 x SW ) - 0.39 PD ma x = (6.95 x SW ) - 1 1.42 TLD+(7.5 – 1 1.2 : 1) 6.93 - 10.34 PD min = (6.93 x SW[...]

3. Physical i nstal lation Image 3-20 8. C heck if the lens is really secured by trying to pull the lens out of the lens holder . C AUTION : Never transport the projector with a Lens mounted in the Lens Holder . Always remove the Lens before transporting the projector . Neglecting this can damage the Lens Holder and Prism . 3.2.5 Lens re moval How [...]

3. Physical i nstal lation Image 3-22 It’ s reco mmended to place the Len s caps of the original Lens packaging, b ack on both side s of the removed Lens to prot ect the opt ics of the Lens. It’ s recom mended to place the foam rubber of the original projector packaging, back in th e Lens opening to prevent intrusion of dust. N ote that this f [...]

3. Physical i nstal lation 3.4 Alignment of a ceiling mount FLM projector Necessary t ools 17 mm open ended spanner. How to align a ceiling mount FLM projector ? 1. Install the projector in the desired location. See installat ion procedure "Suspension of the FLM projector with rigging clamps", page 26. T ake into account the zoom range of[...]

3. Physical i nstal lation Necessary p arts • Four rigging clamps (R82041 1). • Safety chains. How to install and to use the rigging clamps ? 1. M easure the distance, center tube as referenc e, between the two used support bars of the tr uss. X m m Image 3-28 2. Turn the projector upside down and slide the rigging points on there place in t he[...]

3. Physical i nstal lation Image 3-31 5. P lace the projector (upside down) under t he truss installati o n and lower the truss until the support bars of the t russ are nearby the rigging clamps mounted on the projector . Image 3-32 6. L ift up the project or and hook the four rigging clamps over the support bars of the truss . 7. L ock all four ri[...]

3. Physical i nstal lation Proceed with the alignment pr ocedure, see "Alignment of a ceilin g mount FLM projector", page 26. R5976986 FLM HD18 15/03/2010 29[...]

3. Physical i nstal lation 30 R5976986 FLM HD18 15/03/2010[...]

4. Stacking FLM pr ojector s 4. ST A CKING FLM PROJECTORS Gene ral Three interlocking adapter s at the top and at the bottom of the FLM projector allows an easy and fast stacking without using extra tools or accessories. W ARNING : Maximum stack three (3) FLM projectors in a table mount con fi gurat ion. Maximum stack two (2) FLM proj ectors in a [...]

4. Stacking FL M pro jecto rs 4. A re these projectors stacked for a ceiling mount con fi guration? If yes, secure the projectors with safety chains as follows : a) Release the safety hook (H) at both sides of the lowest projector and guide the s afety cable around its carrying handle (C) as illustrated. C H Image 4-3 b) Guide the safety cable aro[...]

4. Stacking FLM pr ojector s W ARNING : Never open an interlocking adapter o f a stacked projector w hich is still susp ended. First place the stacked projectors on the fl oor . 4.2 Aligning stacked FLM projectors Necessary t ools 8m mA l l e n k e y . How to align two stacked FLM projectors ? 1. M ake sure that the int ernal hatch patter n projec[...]

4. Stac king FLM p rojecto rs Skew Q Image 4-8 6. S hift the hatch pattern horizontally and vertically unt il the outline of the hatch pattern is most symm etrically placed with res pect to the reference hatch patter n. Note: Note that t he “Shift” function is motorized, which means that you have to access the projector software, via the local [...]

5. Connectio ns 5. CONNECTIONS About this chapter This chapter describes more in detail the power (P ), the input source (S) and the communication (C) connections of the FLM HD18. P C S Image 5-1 Overview • Power connection • Input source connec tions • Communication connections 5.1 Power connec tion C AUTION : Use onl y the power cord pro vi[...]

5. Connectio ns The voltmeter (M) will immediately indicate the value of the m ains voltage as soon as the projector is connected with the power net . 1 2 M S H P Image 5-2 W ARNING : Do not attempt ope rati on i f the AC supply an d cord a re not within the s peci fi ed voltage and power range. C AUTION : Once t he proje ctor is s witch ed to sta[...]

5. Connectio ns 5.2 Input source connections Gene ral The input and communication unit i s equipped with four input slot s, which accept any type of input module designed for the FLM projector . T he mo dularity of the input modules makes the F LM projector very fl exible regarding input source connectivity . Note that the slot numbering is done f[...]

5. Connectio ns The FLM HD18 is stan dard equippe d with one 5 cable i nput modul e, one HDSDI - SDI input modul e and one DVI inp ut module. Input slot number 4 (l owermost ) is cove red wit h a input c over pl ate. For more i nfor matio n about t he FLM inp ut modules s ee chap ter “Spe ci fi cations”. 5.3 Communication connectio ns Communic[...]

5. Connectio ns female XLR output port (N). So, the following projector in the daisy chain w ill still receive his RC5 code. N ote that the RC5 in/out signals are without c arrier . Mini jack pl ug XLR – Remote CTRL in XLR – Remote CTRL out Pin Description Pin Description Pin Description SG N D 1 GND 1 GND T RC5 in 2 RC5 in 2 RC5 out R n.c. or [...]

5. Connectio ns RS232/422 input port RS232/422 output p ort Pin Description Pin Description 8 CTS : Clear T o Send 8 — (not connected) — 9 R I:R i n gI n d i c a t o r 9 — (not connec ted) — 5 4 3 2 1 1 2 3 4 5 9 8 7 6 6 7 8 9 A B Image 5-13 A Pin num bering male DB–9 connecto r . B Pin num bering female DB-9 conn ector . RS232 An Electro[...]

5. Connectio ns 10/100 Base-T — RJ45 port Pin Description 7 — 8 — USB port The communication interface i s equipped with a master USB port, type “A” connector (H). This USB port will simplify the ser vice procedures for taking backup fi les from the pr ojector without network c onnection. An USB-stick is plugged into the USB port and fi[...]

5. Connectio ns 42 R5976986 FLM HD18 15/03/2010[...]

6. Getti ng started 6. GETTING ST ARTED About this chapter This chapter describes t he functions on the remote control and local keypad and gives an overvi ew how to start up the projector . I f gives also a brief overview of the direct adjustment possible with these controls. Overview • RCU & Local keypad • T erminology overview • Operat[...]

6. G ettin g sta rted MENU EXIT ENTER PAUSE TEXT PHASE TINT COLOR BRIGHTN CONTR 9 0 7 8 5 6 3 4 1 2 LENS LENS ZOOM LENS SHIFT LENS FOCUS 1 22 2 3 4 5 6 7 8 9 10 11 12 13 14 17 15 16 19 20 18 L SHARPN LENS SHIFT 21 1 2 3 4 5 6 7 89 0 MENU EXIT ENTER RGB STB Y PAUSE TEXT PATTERN WINDOW PIP LENS RIGGI NG AUT O 3 10 10 19 17 5 8 21 9 20 16 6 1 7 2 Imag[...]

6. Getti ng started Ind. Key name Description 14 PHASE Us ed to remove the horizontal instabili ty of the image (usually for RGB source). It adjusts the phase of the pixel sampling c lock relative to the incoming signal. 15 FREEZE T o freeze the actual projected image. Freeze sign is displayed in t he upper left corner (a short press on the key). W[...]

6. G ettin g sta rted The actual input volt age is indicated on the voltmeter j ust above the power switch. Starting image projection via the standby key . 1. P ress Stand by key once on the local keypad or on the remote control. MENU EXIT ENTER PAUSE TEXT PHASE TINT COLOR BRIG HTN CONTR 9 0 7 8 5 6 3 4 1 2 LENS LENS ZOOM LENS SHIF T LENS FOCUS L S[...]

6. Getti ng started Switc hing t o Standby . When the proje ctor i s runni ng and you want to go t o stan dby , press t he stand by key for 2 sec onds. Do not press any lo nger on the st andby key ot herwi se the proj ecto r will r esta rt. All custom settings are written to the internal backup device. A message ’Save data ...’ indicates t his [...]

6. G ettin g sta rted 123 45 6 7 890 MEN U EXIT ENTE R RGB STBY PAUSETEXT PATT ERN WINDO W PIP LEN S RIGG ING AUTO 2 1 3 PUSH 2 1 3 PUSH PC C ard Port 1 Po rt 2 10/1 00 Based-T USB Diagnosti c c ode IR recei ver Std/ ON Warning IR Remote CT RL in Remote CT RL o ut RS 232/42 2 out RS23 2/422 in HDSDI - SDI input Inpu t 1 Inpu t 2 Lo op o utput Sy nc[...]

6. Getti ng started 6.5 Q uick setup adjustments Overview • T ext boxes O N or OFF • Quick Lens A djustment • Quick picture in picture • Quick layout selection with Rigging ke y • Quick language selection 6.5.1 T ext bo xes ON o r OFF T ext toggle function The on-screen text boxes can be switched OFF so that an adjustment during the opera[...]

6. G ettin g sta rted The shift menu will be displayed. Image 6-9 3. P ush the cursor key ▲ or ▼ to shift the i mage up or down and ◄ or ► to shift t he image left or right. 4. W hen fi nish ed, press EXIT key to return or ENTER to continue to zoom/focus. Press the LENS key to switch to another pattern. Different patterns are available. 6.[...]

6. Getti ng started Image 6-1 1 6.5.4 Quick layou t selectio n with Riggin g key What can be done ? When the projector is playing, changing fr om one layout to another is possible without displaying any on s creen selection menu. The current image is not dis turbed as long no selection is made. Press the Rigging k ey followed by one or two digits t[...]

6. G ettin g sta rted The current active language is indicated with an asterisk (*) . Image 6-13 Image 6-14 Image 6-15 6.6 Projector addres s 6.6.1 Displaying and Programming addre sses Displaying the Projector Address on th e Screen. 1. P ress Address key (recessed key on the RCU) with a penc il. The projector ’s address is displayed as fi rst [...]

6. Getti ng started 6.6.2 C ontrolling the projector Projector address Address installed in t he projector to be indiv idually controlled. Common address Projector will alway s execute the command coming from a RCU programm ed with that common address. Why a projector a ddress ? As more than one projector c an be installed in a room, each projector[...]

6. G ettin g sta rted 6.8 Co ntrolling the Projector Picture Controls When an image control i s pressed, a text box with a bar scale, icon and f unction name of the c ontrol, e. g. ’brightness...’ appears on the screen (only i f text is ON). See example screen. The length of t he ba r scale and the value of the numeric indication indicate the c[...]

7. Sta rt up of t he A djust ment M ode 7. S T ART UP OF THE ADJUS TMENT MOD E Overview • About the adjustme nt mode • About the use of the remote control and the l ocal keypad • Start up the adjustment mode • Navigation and adjustments • On screen menus versus LCD display menus • T est patterns in adjustment mode • Menu memor y 7.1 A[...]

7. St art up of the A djustme nt Mode The main menu of the adjustment m ode opens. Image 7-1 7.4 Navigation and adjustments How to na vigate in the me nu struct ure? On ce in th e me nu s tru ctu re, u se t he ▲ or ▼ keys on the remote control ( or the ▲ or ▼ (+ or -) key on the local keypad) to scroll through the items in the displayed men[...]

7. Sta rt up of t he A djust ment M ode When quitting the menu s tructure, the backlighting of the LCD panel is switc hed off af ter a f ew seconds. 7.6 T est patterns in adjustment mode Overview When the adjustment mode is star ted, a test pattern can be called at any m oment just by pressing the Patte rn key on the RCU or the local key path. Pres[...]

7. St art up of the A djustme nt Mode 58 R5976986 FLM HD18 15/03/2010[...]

8. I nput m enu 8. INPUT MENU Overview •O v e r v i e w fl ow • Slot module type • Input locking • Minimum delay • Native resolution • Source switching • No signal 8.1 Overvi ew fl ow Overview Level 1 Level 2 Level 3 Input Slot module t ype 5-cable HD- SDI - SDI DVI DVI HDCP Input locking Free running Au tom ati c Input 1 to 4 Minim[...]

8. Input menu C AUTION : Always install a cover plate on an unused input slot. T his to prevent dust intrusion into the pro- jector . 8.2.2 Input con fi guration How to change? 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Input and press ENTER . The Input menu is displayed. 3. U se the ▲ or ▼ key to s elect Slot m[...]

8. I nput m enu Image 8-5 Press ENTER to toggle between [Analog] and [TTL]. For a HDSDI - SDI module When EN TER is pressed on a H DSDI or SDI module, the following m enu appears: Image 8-6 Use the ▲ or ▼ key to s elect the desir ed con fi guration and press ENTE R to select. When an input with priority is selected, then if a signal is connect[...]

8. Input menu Image 8-7 Image 8-8 Image 8-9 When: Free run Output is locked on an i nternal sync (60 Hz) Automatic Output is l ocked on the selected input for the main window Input 1 Output is locked on source 1 Input 2 Output is locked on source 2 Input 3 Output is locked on source 3 Input 4 Output is locked on source 4 The options menu changes de[...]

8. I nput m enu Genlock off (default position) locking done on input s ource of main window , when automatic was selected or on the selected input source when a speci fi c input was selected. Projector detects automatically the vertical frequency and clock frequency of the input si gnal. A slightly differ ence with the source is possible. Genlock [...]

8. Input menu Image 8-14 When the show native resolution function is in the ON position, the projector handles the source as follows: Source Projected image Name Ratio Resolution Ratio Resolution XGA 4:3 1024x768 4:3 1024x768 image projected with black borders SXGA 5:4 1280x1024 5:4 1280x1024 image projected with black borders SXGA + 4: 3 1400x1050[...]

8. I nput m enu When native resolution is on, som e other menus such as Aspect ratio , timings are greyed out. 8. 6 Sou rc e swi tc hi ng Switching from one s ource to another T o minimize undesired effects when switchi ng from one source to another one can use the swit ching mode , using the fade ef fect. Image 8-17 Example of fade eff ect Switchi[...]

8. Input menu W h a tc a nh a p p e nw h e nn os i g n a l When no signal available, a blue or black background color can be displayed or the projector can be shutdown with a certain retarding tim e. 8.7.1 Background color How to change the color 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Input and press ENTER . The [...]

8. I nput m enu The Input menu is displayed. 3. U se the ▲ or ▼ key to select Shutdown time and press ENTE R . 4. U se the ▲ or ▼ key to change the v alue. Or , enter the desired value w ith the keyboard. When trying to exceed the maximum allowed value, the syst em will set i t back to the maximum value. Image 8-27 Image 8-28 Image 8-29 R59[...]

8. Input menu 68 R5976986 FLM HD18 15/03/2010[...]

9. Im age m enu 9. IMAGE MENU Overview •O v e r v i e w fl ow • How to select the i mage adjustments? • Image Settings • Aspect ratio •T i m i n g s • Image fi les services • Save custom settings 9.1 Overvi ew fl ow Overview Level 1 Level 2 Level 3 Level 4 Image Image settings Contrast Brightness Saturation Ti n t Phase Sharpness N[...]

9. Imag e men u Level 1 Level 2 Level 3 Level 4 V ertical start Advanced settings Clamp delay Clamp width Field polarity Film mode detection Image fi le services Manual load Delete Delete all Rename Copy Options Load fi le Save cust om setting s 9.2 How to select t he image a djustments? Start u p 1. U se the ▲ or ▼ key to select Image . 2. P[...]

9. Im age m enu 9.3.1 Con trast About Contrast The contrast function is used to adjust the contrast between the light and dark areas of the displayed image. How to change the contrast? 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Image and press EN TER . 3. U se the ▲ or ▼ key to select Image settings and press ENT[...]

9. Imag e men u The higher the value, t he higher the br ightness. Image 9-7 Image 9-8 Image 9-9 Image 9-10 9.3.3 Sat uration About (color) saturation The color function is used to adjust the c olor saturation levels. How to change t he saturation? 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Image and press EN TER . 3[...]

9. Im age m enu 9.3.4 Tint (hue) About Ti nt The Tint f unction is used to adjust color hue to obtain tr ue color reproduction and is only active for Video and S-V ideo when the NTSC color system is used. For P AL and SECAM sources, Ti nt is not accessible. How to change t he saturation? 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ [...]

9. Imag e men u How to change the phase? 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Image and press EN TER . 3. U se the ▲ or ▼ key to select Image settings and press ENT ER . 4. U se the ▲ or ▼ key to select Phase and press ENTER . The Phase progress bar appears. 5. U se ◄ or ► to change the phase and re[...]

9. Im age m enu Image 9-24 Image 9-25 Image 9-26 Image 9-27 9.3.7 Noise reduction About Noise reduction Reduces noise and pixel jitter in all video sources. How to change? 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Image and press EN TER . 3. U se the ▲ or ▼ key to select Image settings and press ENT ER . 4. U se[...]

9. Imag e men u 9.3.8 Color temperature What can be done ? The color temperature can be selected according to the type of source: There are 5 different preset color temperatures: •P r o j e c t o r w h i t e • computer : 9300 K • Video : 6500 K • Film : 5400 K • Broadcast : 3200 K These calibrated presets can be sel ected and will provide[...]

9. Im age m enu Image 9-35 9.3.8.2 Set a custom c olor te mperature How to enter a custom value? 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Image and press EN TER . 3. U se the ▲ or ▼ key to select Image settings and press ENT ER . 4. U se the ▲ or ▼ key to select Color temperature and press ENTER . 5. U se t[...]

9. Imag e men u 9.3.9 Input balance Overview • Introduction to Input Balance • Adjusting the input balance 9.3.9.1 Introduction to Input Balance Introduction: Unbalanced color signals When transporting signals, there is always a risk of deter ioration of the inf ormation contained in the signals. In case of information contained in the amplitud[...]

9. Im age m enu One can con clud e here tha t a good da ta conve rsion ca n only be me t by usi ng three previo usly (i nput) balanc ed color signals The objective of input ba lancing The objective in input bal ancing is to “set” the same black level and the sam e white level for t he three colors of a particular input source. Black level setti[...]

9. Imag e men u An alternative to a full screen White/black pattern i s the standard gray scale pattern, the white bar will b e used for white bal ance and t he blac k bar for b lack bal ance. Image 9-45 Black bal ance 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Image and press EN TER . 3. U se the ▲ or ▼ key to s[...]

9. Im age m enu The projected image should now be noi sy full black If one use s a gray scal e pattern, the br ight spo ts shoul d appear in t he blac k bar . Performing White input balance 1. C onnect the source you want to projec t. 2. P ress MENU to activate the menus. 3. U se the ▲ or ▼ key to select Image and press EN TER . 4. U se the ▲[...]

9. Imag e men u 9.4 Aspect r atio Aspect ratio Relation between t he horizontal & vertical dimension in which the window will be displayed, e.g. 4 by 3 or 16 by 9. Can also be expressed as a decimal n umber , such as 1.77. The larger t he ratio or decimal, the wider ar e less s quare the image. What can be done? The aspect ratio setti ng forces[...]

9. Im age m enu Use t he or k ey to adjust the horiz ontal size of the image. When the desired aspect ratio is obtained, press EXIT . Image 9-60 Image 9-61 9.5 T imings 9.5.1 Source timings Adjustable items • Horizontal start in pixels : n umber of pixels between the beginning of the input signal and the start of the video information in the sign[...]

9. Imag e men u The corresponding adjust ment box is displayed. E.g. Horizontal tot al pixels. Image 9-65 5. U se the ▲ or ▼ key (or ◄ or ► key) to change the value. 6. P ress ENTER t o acti va te the n ew va lu e. 7. If necessary to change other settings, repeat from step 4. 9.5. 2 Advan ced se ttin gs About the advanced settings Clamp del[...]

9. Im age m enu Image 9-67 Image 9-68 Image 9-69 Image 9-70 How to change the fi eld pol arity? 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Image and press EN TER . 3. U se the ▲ or ▼ key to select Adv anced settings and press ENTER . The Advanced settings menu is displayed. 4. U se the ▲ or ▼ key to sel ect [...]

9. Imag e men u Image 9-74 9.5. 3 Adv ance d set ting s, fi lm mode detection About fi lm mode detection This mode detects whether fi lm or video is displayed. When enabled, the hardware looks for tell-tale signs of 3:2 or 2:2 pull-down sequences. Thes e are the result of converting cinema material r ecorded at 24 frames-per-second to t he telev[...]

9. Im age m enu Aut o Detects for fi lm and it starts t o avoid deinterlacing ar tefacts, and it r esults in a perfect art efact-free display . Off no det ection for fi lm mode. When fi l m with a banner is projected at t he same time, and fi lm mode is auto, the banner will s hown possible artefacts as the software will detec t a fi lm. Image[...]

9. Imag e men u Possible fi le Manipulations The following fi le manipulations are possible : • Load : installation of a fi le for a new source. • Rename : renaming a fi le. • Delete : deleting a fi le (o nly custom fi les) • Delete all : delete all custom fi les • Options : way o f loading a fi le wh en a source is selected. A lo[...]

9. Im age m enu 9.6. 3 Delet e fi le How to delete? 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Image and press EN TER . 3. U se the ▲ or ▼ k ey to select F ile services and press EN TER . The F ile service m enu is displayed. 4. U se the ▲ or ▼ key to select Delete and press ENTER . The delete window opens. [...]

9. Imag e men u Image 9-87 Image 9-88 Image 9-89 Image 9-90 Or , if you are no t sure to delete all custom fi les , select No and press ENT ER to activate the sel ection. 9.6. 5 Rename a fi le How to renam e? 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Image and press EN TER . 3. U se the ▲ or ▼ k ey to select F[...]

9. Im age m enu Image 9-94 Image 9-95 9.6.6 Copy a fi le How to copy? 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Image and press EN TER . 3. U se the ▲ or ▼ k ey to select F ile services and press EN TER . The F ile service m enu is displayed. 4. U se the ▲ or ▼ key to s elect Copy and press ENTE R . The cop[...]

9. Imag e men u 2. U se the ▲ or ▼ key to select Image and press EN TER . 3. U se the ▲ or ▼ key to select Image services and press ENTER . The Image service menu is displayed. 4. U se the ▲ or ▼ key to select O ptions and press ENTER . Image 9-101 Image 9-102 Image 9-103 The options window opens. 5. U se the ▲ or ▼ k ey to select L[...]

9. Im age m enu The custom settings are writt en to the i nternal backup device. A message menu “Save data ...” is di splayed during the save operation. Image 9-106 Image 9-107 Image 9-108 R5976986 FLM HD18 15/03/2010 93[...]

9. Imag e men u 94 R5976986 FLM HD18 15/03/2010[...]

10. Layout m enu 10. LA YOUT M ENU Overview •O v e r v i e w fl ow • Main window • PIP window • Layout fi le services • Zoom - Focus 10.1 Overview fl ow Overview Level 1 Level 2 Level 3 Le vel 4 Layout Main window Source Siz e Posi ti on PIP window PIP window [ON/OFF] Source Siz e Posi ti on Layout fi le s er vi ce s Load Main full sc[...]

10. Layout m enu Image 10-1 Image 10-2 The fi rst character is highlighted. Use the ▲ or ▼ key to select the desir ed character and press or key to selec t the next character in the name. Press EXIT to return. The new fi le is generated. 10.2.1 Sour ce selectio n What can be done ? The source of the main window can be selected via the Main wi[...]

10. Layout m enu Image 10-7 Size adjust ment main window A wi dth adjust ment B hei ght adjustment The size can be changed with res pect to the original aspect ratio. How to adjust with respect to the original aspect ratio? 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Lay out and press ENTER . 3. U se the ▲ or ▼ ke[...]

10. Layout m enu Image 10-1 1 [ ] = no lock between height an d width. [x] = width and height are loc ked. 6. Use or ▲▼ to adjust t he size with r espect to the or iginal aspect r atio. When the des ired size is reached, press EX IT . A Save window opens . Image 10-12 How to adjust height and width separately? 1. P ress MENU to activate the men[...]

10. Layout m enu Image 10-16 [ ] = no lock between height an d width. [x] = width and height are loc ked. 6. U se the ▲ or ▼ key to adjust the height . Use t he ◄ or ► key to adjust the width. When the des ired size is reached, press EX IT . A Save window opens . Image 10-17 7. S elect with the ▲ or ▼ key Ye s an d press ENTER . Select [...]

10. Layout m enu Use t he ◄ or ► key to adjust left start point. When the des ired size is reached, press EX IT . A Save window opens . Image 10-19 Image 10-20 Image 10-21 Image 10-22 Image 10-23 6. S el ect w ith th e ▲ or ▼ key Save and press ENTER . Se lec t with the ▲ or ▼ key Delete , when no save is desired and press ENTE R . 10.3[...]

10. Layout m enu Image 10-24 Position of PiP A T op position B Left positio n 10.3.2 Picture in Pictur e activation How to activ ate PIP? 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Lay out and press ENTER . 3. U se the ▲ or ▼ k ey to select P IP Window and press ENTER . The PIP w indow opens. 4. U se the ▲ or ?[...]

10. Layout m enu The source selection window opens. 5. U se the ▲ or ▼ key to select the desir ed source and press ENTE R to activate t his source. Image 10-28 Image 10-29 Image 10-30 Image 10-31 10.3.4 Picture in Pi cture size of the wi ndow What can be done? The width and height of the picture in picture window can be changed till the desired[...]

10. Layout m enu Image 10-33 Size PIP wi ndow remark How t o chan ge the s ize w ith r espe ct to t he asp ect ra tio ? 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Window and press ENTER . 3. U se the ▲ or ▼ k ey to select P IP Window and press ENTER . The main window opens. 4. U se the ▲ or ▼ key to select Si[...]

10. Layout m enu A Save window opens . Image 10-38 7. S elect with the ▲ or ▼ key Ye s an d press ENTER . Select with the ▲ or ▼ key No , when no save is desired and press ENTER . How to chang e the heigh t and width sep arately ? 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Window and press ENTER . 3. U se the[...]

10. Layout m enu A Save window opens . Image 10-43 7. S elect with the ▲ or ▼ key Ye s an d press ENTER . Select with the ▲ or ▼ key No , when no save is desired and press ENTER . 10.3.5 P icture in Picture, position window What can be done? The picture in picture window can be p osition on any place on the display just by changing its star[...]

10. Layout m enu 10.4 Layout fi le service s Overview • Load layout • Rename a layout • Delete a layout • Copy / Save as a layout 10.4.1 Load layout When loading a layout which required two sources, the PI P wind ow On/Of f settin g will be switched t o ON. How to load? 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to se[...]

10. Layout m enu 10.4.2 Rename a layout Only custom created layouts can b e renamed. How to renam e? 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Window and press ENTER . 3. U se the ▲ or ▼ key to select Lay out and press ENTER . The layout services window opens. 4. U se the ▲ or ▼ key to select Rename and pres[...]

10. Layout m enu The layout services window opens. 4. U se the ▲ or ▼ key to select Delete and press ENTER . The Delete window opens. Image 10-57 Image 10-58 Image 10-59 Image 10-60 The fi rst 3 layouts ar e default layouts and cannot be delete. 5. U se the ▲ or ▼ k ey to select the lay out that must be deleted. 6. P ress ENTER to fi nali[...]

10. Layout m enu Image 10-61 Image 10-62 Image 10-63 Image 10-64 10.5 Zoom - Focus What can be done ? When changing from one layout to another , the zoom/focus settings can be diff erent for each layout or they can be kept the same for all layouts. How to set the zoom - focus setting 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key [...]

10. Layout m enu Image 10-65 Image 10-66 Image 10-67 110 R5976986 FLM HD18 15/03/2010[...]

11. L amp m enu 11 . L A M P M E N U Overview •O v e r v i e w fl ow • Lamp power m ode • Lamp pow er • Lamp Identi fi cation • Z-axis adjustment 1 1.1 Overvi ew fl ow Overview Level 1 Level 2 Level 3 Level 4 Lamp Powe r Mode Normal Economic Powe r CLO mode [On / Off] CLO target lumens Identi fi cation Serial number Article number Run[...]

11. Lamp men u Image 1 1-1 Image 1 1-2 Image 1 1-3 Remarks 1. When mode is set to [Normal], then CLO mode can be switched on and off . 2. When switching the power mode to [Economic] while the CLO mode is On, then the CLO m ode is switched to Off. 3. When the power mode is [Economic] and the CLO mode is switched to the [On] mode, then the power mode[...]

11. L amp m enu 1 1.4 Lamp Identi fi cation About The lamp identi fi cation menu gives an overview of the most important parameters of the used lamp. These parameters are: • Serial number lamp • Article number of the used lamp • Run time since fi rs t sta rt up of t he la mp • Remaining run time for a safe operation of the lamp • Numbe[...]

11. Lamp men u The Z-axis dialog box is display and indicates the current light output.. Image 1 1-1 1 Image 1 1-12 Image 1 1-13 114 R5976986 FLM HD18 15/03/2010[...]

12. Alignme nt menu 12. A LIGNMENT MENU About this chapter This chapter describes the ali gnment of the projector once the physical i nstallation is fi nished. Via the sof tware, the image will be perfectly al igned on the screen. Overview •O v e r v i e w fl ow • Orientation • Lens adjustment • Side keystone • W arp geom etry settings [...]

12. A lignm ent me nu Level 1 Level 2 Level 3 Gamma Internal patterns Checker board Color bars Convergence Focus Full screen black Full screen blue Full screen green Full screen red Full screen white Hatch Outline Color space Projector EBU SMPTE Custom ScenergiX Status White level Black level Show pattern Reset 12.2 Orientati on What can be done? T[...]

12. Alignme nt menu Image 12-1 Image 12-2 Image 12-3 For more i nfor mation a bout t he physic al ins tall ation , see ch apter “G eneral” , “Pr ojector con fi guratio ns”. 12.3 Lens adjustment Quick way to enter the lens adjustment setting; press the lens bu tton on the local keypad or the remote control. Access to the lens adju stments 1[...]

12. A lignm ent me nu 2. U se the ▲ or ▼ key to zoom the lens. Use t he ◄ or ► key to focus the lens. 3. P ress ENTER t o go to the shift adjustments. Lens shift 1. U se the ▲ or ▼ key to select Shi ft and press ENTE R or when in the Zoom /Focus menu press ENTER to toggle to t he Shift menu. Image 12-9 Image 12-10 2. U se the ▲ or ▼[...]

12. Alignme nt menu 2. U se the ▲ or ▼ key to select Alignment and pr es s ENTER . 3. U se the ▲ or ▼ key to select Side ke yston e and press ENTER . The keystone dialog box appears. 4. U se the ◄ or ► key to adjust the keystone of the image. When the upper part of the image is wider than the lower part of the image, push the ◄ key . [...]

12. A lignm ent me nu Image 12-16 Example 1 : distorted i mage Image 12-17 Example 2 : distorted i mage The W arp f unctio ns can s low down t he switc hing f rom one sourc e to anot her when I nput l ockin g is set t o automatic and there is a difference in frequency between b oth sources. 12.5.2 Wa rp Status Dif fer ent mo des The warp distortion[...]

12. Alignme nt menu 12.5.3 Horizont al keysto ne correc tion What can be done? Horizontal keystone adjustment is used to al ign the image if the projector i s mounted at a non standard projection angle. In some cases, horizontal keystone has to be used in combination with vertical keystone. W hen adjusting the keystone adjustment, the aspect ratio [...]

12. A lignm ent me nu Image 12-25 12.5.4 V ert ical keyst one corr ection What can be done ? V ertic al keystone adjustm ent is used to align the ima ge if the projector is mounted at a non standar d projection angle. In som e cases, vertical keystone has to be used in combination with hori zontal keystone. When adjusting the keystone adjustment, t[...]

12. Alignme nt menu Image 12-27 Image 12-28 Image 12-29 Image 12-30 12.5.5 Rotation What can be done ? A rotation is used to turn the image on the projection surface when the projector is sli ghtly rotated around its axes. Image 12-31 Rotation How to rotate 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Alignment and pr [...]

12. A lignm ent me nu Image 12-32 Image 12-33 Image 12-34 Image 12-35 12.5.6 Pinc ushion - Barrel correction What can be done ? A barrel distortion or pincushion distor tion can adjusted s o that a normal i mage is displayed. Positive adjust ments introduce more barrel distor tion. Negative adjustments introduce more pincushi on distortion. Image 1[...]

12. Alignme nt menu Image 12-37 Image 12-38 Image 12-39 Image 12-40 12.5.7 4 corner correction What can be done ? Each corner of the image can be moved individually in the X and Y direction t o correct a distor tion. T a ke in account that the aspect ratio can be changed while moving one of the corners. The following adjustments a re possible: •T[...]

12. A lignm ent me nu 5. U se the ▲ or ▼ key to select a corner and press ENTE R . 6. U se ▲ or ▼ key to move the selected point in the X posit ion and use ◄ or ► key to move the selected point in the Y posit ion. Image 12-42 Image 12-43 Image 12-44 Image 12-45 Image 12-46 12.5.8 Reset w arp settin gs What can be done ? The current warp[...]

12. Alignme nt menu Image 12-47 Image 12-48 Image 12-49 12.5.9 Load warp fi le What can be done ? Special corrections which are not possible wit h the functions inside the pr ojector are possible by loading a fi le which contains these corrections. This fi le should be created on an external c omputer and then stored on the project or using Proj[...]

12. A lignm ent me nu Image 12-54 12.6 Contrast enhancement Purpos e Increase the c ontrast for all video and data sources. How to change 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Alignment and pr es s ENTER . 3. U se the ▲ or ▼ key to select Contrast enhancement and press ENTER . The current selected contrast s[...]

12. Alignme nt menu Which blanking adjustmen ts are available ? • top blanking • bottom blanking •l e f t b l a n k i n g • right blanking Image 12-59 Blanking A T op blanking B Bottom blanking C Left blanki ng D Right blankin g The reset function bri ngs all blanking settings back to zero. How to adjust the blanking? 1. P ress MENU to acti[...]

12. A lignm ent me nu 12.8 Gamma About Gamma Gamma is an image quality enhancem ent function t hat offers a richer i mage by brightening the already darker portions of the image without altering t he brightness of the brighter portions (contr ast feeling enhanced). How to adjust gamma? 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ ke[...]

12. Alignme nt menu The selected pattern is displayed. The following patterns are available: - Checker board - Color bars - Convergence -F o c u s - Full screen black - Full screen blue - Full screen green - Full screen red - Full screen white -H a t c h - Outline -P u r i t y - ScenergiX 12.10 Color space Color space A color space or color standar[...]

12. A lignm ent me nu 6. W hen cus tom is selected, use the ► key to view the details. T o adjust the custom values, select the desired color point using the ▲ or ▼ key and change the v alue with ◄ or ► key until the desired value is reached. When fi nished, press EXIT to return. Image 12-72 12.1 1 S cenergiX Overview • Introduction ?[...]

12. Alignme nt menu Adjustable overlappi ng area 50% 100% 50% 100% image 2 image 1 image 2 image 1 Light output per image Total composite light output Image 12-74 Scenerg iX Basic P rinciple 12.1 1.2 Preparations Scenerg iX Preparations T o ensure proper ScenergiX adjustment, be sure that the following adjustments are done perfectl y on all project[...]

12. A lignm ent me nu 12.1 1.4 Scene rgiX ov erlap zo ne (horiz ontal Sc energ iX) De fi nitions Image 12-78 Scenergi X set up Overlap : number of pixels that over lap Horizontal res olution of 1 projector T otal horizontal screen resolut ion : [ (horizontal res olution of 1 projector) x 2] minus overlap. Horizontal Resolution source : nu mber of [...]

12. Alignme nt menu How to set for the second projector 1. G o to Layout → Main window → Size 2. E nter the value for the Width as follow: T otal horiz ontal screen resol ution / 2 - 0.5 x overlap zone. 3. P osition = original start + horizontal width of projector 1 - overlap zone Image 12-83 Image 12-84 Image 12-85 Image 12-86 Image 12-87 12.1[...]

12. A lignm ent me nu How to set for the fi rst projector 1. G o to Layout → Main window → Size 2. E nter the value for the Height as fol low: T otal V ertical screen resoluti on / 2 - 0.5 x overlap zone. 3. Pos iti on remai ns the s ame. Image 12-89 Image 12-90 Image 12-91 Image 12-92 How to set for the second projector 1. G o to Layout → M[...]

12. Alignme nt menu Image 12-96 Image 12-97 12.1 1.6 Scen ergiX s ize ad justmen t (Whit e level ) What can be done with the white l evel menu? The white level menu contains top, bottom, left or right it em to set the blending zone. The ScenergiX menu items are only accessible when status is [On]. How to set the blending zone? 1. P ress MENU to act[...]

12. A lignm ent me nu A pattern with the different areas is displayed. Image 12-102 Width se lections 6. U se the cursor keys to move the border of the overlap area to the desired position. Set fi rst the width for the fi rst proj ector and repeat for the second one. Image 12-103 Wi dth s et up for p ro jecto r 1 138 R5976986 FLM HD18 15/03/2010[...]

12. Alignme nt menu Image 12-104 Wi dth s et up for p ro jecto r 2 12.1 1.7 Adju sting th e black l evel of the image s Why black le vel adjus tment For dark images, the overlap zone will be brighter then the r est of the images. Typically for DLP p rojectors, next to the overlap zone, a brighter area is recognized. This area is known as a DLP leak[...]

12. A lignm ent me nu 5. U se the ▲ or ▼ key to select one of the four size adjustments and press ENTE R . Image 12-106 Image 12-107 Image 12-108 Image 12-109 Image 12-1 10 DLP leakage ar ea 1 Overlap area 2 DLP Leakage area 6. U se the cursor keys t o move the green border line to the desir ed position. 140 R5976986 FLM HD18 15/03/2010[...]

12. Alignme nt menu The leakage area for this overlap is de fi ned and wil l be excluded dur ing black level adjustment. How to adjust 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Alignment and pr es s ENTER . 3. U se the ▲ or ▼ key to select ScenergiX and press ENTER . 4. U se the ▲ or ▼ key to select Black l[...]

12. A lignm ent me nu 142 R5976986 FLM HD18 15/03/2010[...]

13. P rojector co ntrol 13. PROJECT OR CONTROL About this chapter This chapter explains the set up of the control part of the software such as projector address and all types of communication with the external world. Overview •O v e r v i e w fl ow • Projector address • Serial communication •N e t w o r k • IR control swit ching •A r t[...]

13. P roje ctor c ontrol Level 1 Level 2 Level 3 Shortcut keys Menu position Menu Bar sca le Local LCD Local LCD time ou t Local LCD contrast Language English Français Deutsch Español Italiano 13.2 Projector address Overview • Individual projector address • Common address 13.2.1 Individual projector address About individual projector address [...]

13. P rojector co ntrol Image 13-1 Image 13-2 Image 13-3 Image 13-4 13.2.2 Common addr ess About common address A common address can be ’0’ or ’1’. Any command coming from a remote control pr ogrammed with that common address will be executed. How to change the common addres s? 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ ke[...]

13. P roje ctor c ontrol Image 13-8 13.3 Serial communication Overview • Baud rate setup • Interface s tandard • RS422 termination 13.3.1 Baud rate setup What can be done? The baudrate for a serial connection with a computer can be set up. How to set up? 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Projector cont[...]

13. P rojector co ntrol 3. U se the ▲ or ▼ key to se lect Serial communication and press EN TER . The serial communication menu opens. 4. U se the ▲ or ▼ key to select Interface standard and press ENTER to toggle between [RS232] or [RS422].. Default: [RS232] Image 13-12 Image 13-13 Image 13-14 13.3.3 RS422 termina tion What can be done? Whe[...]

13. P roje ctor c ontrol 13.4.1 Intr oduction to a Network connection DHCP Dynamic host co n fi guration protocol . DHCP is a communications pr otocol t hat lets network administrators manage centrally and automate the assignment of IP addresses in an organization’ s network. Using the Internet Protocol, each machine that can connect t o the Int[...]

13. P rojector co ntrol [ON] = DHCP is activated. Automatic assigning of an address is activated. [OFF ] = DHCP is deactivated. A fi xed address will be used. Image 13-18 Image 13-19 Image 13-20 13.4.3 IP-address s et up How to set up? 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Projector control and press ENTER . 3.[...]

13. P roje ctor c ontrol 2. U se the ▲ or ▼ key to select Projector control and press ENTER . 3. U se the ▲ or ▼ key to select Network and press ENTER . The Ethernet menu opens. 4. U se the ▲ or ▼ key to select Subnet mask and press ENTER to selec t. Note: An address contains 4 octet s with a maximum value of 255. Fill out the 4 fi eld[...]

13. P rojector co ntrol Image 13-29 Image 13-30 Image 13-31 Image 13-32 6. P ress EXIT to return. 13.5 IR control switching What can be done? Each IR receiver insi de the projector can be activ ated or deactivated. When an IR receiver is deactivated, no IR signal send t o this IR receiver will be processed. How to switch 1. P ress MENU to activate [...]

13. P roje ctor c ontrol Overview • DMX address • DMX universe • DMX monitor • DMX mode • Art-Net activat ion • Home lens at startup Art-Net DMX When using a DM X console compatible with Art-Net, the Ethernet network serves as the link for DMX control. Make sure that your light ing desk and all projec tors are within t he same IP addres[...]

13. P rojector co ntrol How to s et a DMX uni ver se 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Projector control and press ENTER . 3. U se the ▲ or ▼ key to select ART D MX and press ENTER . 4. U se the ▲ or ▼ key to select DM X universe and press ENTE R . 5. U se the ▲ or ▼ key to select a new value Or [...]

13. P roje ctor c ontrol Image 13-44 Image 13-45 Image 13-46 Image 13-47 When selecting DMX monitor and no DMX device is connected, the message “ No DMX data, check connection <ENTER> to d isplay channels ” appears on the s creen. When ENTE R is pressed the sam e window appears as DMX Monitor but without values. 13.6.4 DMX mode What can b[...]

13. P rojector co ntrol Image 13-48 Image 13-49 Image 13-50 13.6.5 Art-Net a ctivati on What can be done ? DMX via Art-Net can be activated [On] or blocked [Off] . Default value : o ff How to toggle 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Projector control and press ENTER . 3. U se the ▲ or ▼ key to select ART[...]

13. P roje ctor c ontrol [On] : home lens will be executed during power on. [Off] : home lens will not be executed during power on. Image 13-54 Image 13-55 Image 13-56 13.7 Buttons Functionality Some buttons on the RCU or local keypad can have a dif ferent functionality depending on the need of the pr ojector owner . Overview • Standby button •[...]

13. P rojector co ntrol 13.7.2 AP A ( auto) button What can be done? The function of the AP A (auto) button c an be con fi gured according the wishes of the user . The function can be: • Align only (only aligning of t he preview window is executed) • Auto-image menu. This function opens an auto image m enu where the user can make his choice be[...]

13. P roje ctor c ontrol Image 13-66 13.8 Menu position Overview • On screen m enu • Bar scale 13.8.1 On scree n menu What is possible? The on screen menu can be positioned on 3 different places on t he screen but always vertically centered on the screen. The horizontal position can be: • Centered • T op aligned • Bottom aligned Menu posi[...]

13. P rojector co ntrol 13.8.2 Bar sc ale What is possible? The bar scale can be positioned on 3 different places on the screen but always vertically on the right side. The horizontal position can be: • Centered • T op aligned • Bottom aligned Brightness: 60 0 100 Brightness: 60 0 100 Brightness: 60 0 100 Image 13-71 Bar scale po sition How t[...]

13. P roje ctor c ontrol Image 13-75 Image 13-76 Image 13-77 13.9.2 Local LCD contrast What is possible? The contrast of the local LCD can be adapted the needs of the environment. How to change? 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Projector control and press ENTER . 3. U se the ▲ or ▼ key to select Local L[...]

13. P rojector co ntrol The following languages are available: •E n g l i s h • French •G e r m a n • Spanish • Italians All available languages are indicated in the l anguage of the country . The current active language is indi cated by an asterisk (*). How to change the language 1. P ress MENU to activate the menus. 2. U se the ▲ or ?[...]

13. P roje ctor c ontrol 162 R5976986 FLM HD18 15/03/2010[...]

14. S ervice m enu 14. S ER VICE MENU About this chapter This chapter refer s to the Service menu in which the customer can fi nd valuable infor mation when calling the Barco help desk. 14.1 Overview fl ow Overview Level 1 Lev el 2 Level 3 Serv ice Identi fi cation Diagnosis Ve r s io n V oltages T emperatures Fan speeds I2C SPI Error logging Co[...]

14. Ser vice men u The following items will be displayed : • Projector address •T y p e o f p r o j e c t o r • Package •C o n fi guration • Baud rate • IP address • MAC address •T e x t • Serial number of proj ector: this numb er can be useful when calling for technical ass istance. • Runtime • Lamp runtime •C u s t o m e [...]

14. S ervice m enu 14.3 Diagnosis What ca n be seen? The diagnosis menu gives the poss ibility to get an overview of the working of the projector . 14.3.1 How to start up the diagnosis? Start u p 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Ser vice and press ENTER . The service window opens. 3. U se the ▲ or ▼ key[...]

14. Ser vice men u Image 14-1 1 Use the ▲ or ▼ item in the menu to select the previous or next p age with information. 14.3.3 V oltages How to di spl ay an over vi ew? 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Ser vice and press ENTER . The service window opens. 3. U se the ▲ or ▼ key to select Diagnosis and[...]

14. S ervice m enu Use the ▲ or ▼ item in the menu to select the previous or next p age with information. 14.3.4 I²C diagnosis How to select? 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Ser vice and press ENTER . The service window opens. 3. U se the ▲ or ▼ key to select Diagnosis and press EN TER . The diagn[...]

14. Ser vice men u The T em perature overview menu wi ll be display ed. Image 14-20 Image 14-21 Image 14-22 Image 14-23 Use the ▲ or ▼ item in the menu to select the previous or next p age with information. 14.3.6 Fan speed s overv iew How to ge t an over view? 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Ser vice [...]

14. S ervice m enu Image 14-24 Image 14-25 Image 14-26 Image 14-27 Use the ▲ or ▼ item in the menu to select the previous or next p age with information. 14.3.7 SPI How to g et an over view 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Ser vice and press ENTER . The service window opens. 3. U se the ▲ or ▼ key t[...]

14. Ser vice men u Image 14-31 14.3.8 Error logging overview How to ge t an over view? 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Ser vice and press ENTER . The service window opens. 3. U se the ▲ or ▼ key to select Diagnosis and press EN TER . The diagnosis screen will be displayed. 4. U se the ▲ or ▼ key to[...]

14. S ervice m enu The convergence pattern is displayed. P ress ENTE R to toggle to another patt ern. Press EXIT t o return to t he menu. Image 14-35 Image 14-36 Image 14-37 5. T o adjust the convergence of the sel ected pattern, use the ◄ or ► f or a horizontal adjustment and ▲ or ▼ for a vertical adjust- ment. Image 14-38 Image 14-39 Adju[...]

14. Ser vice men u The internal service patt ern window opens. 4. U se the ▲ or ▼ key to select the desired patterns and press ENTER . When a pa ttern is selected, press ENTE R to toggle to other patterns of the selected type. Press EXIT t o return to the internal service pattern menu. Image 14-40 Image 14-41 Image 14-42 14.6 Restore factory de[...]

14. S ervice m enu How to return t o the default settings 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Ser vice and press ENTER . The service window opens. 3. U se the ▲ or ▼ k ey to select Res tore factory defaults and p re ss ENTER . The factory defaults con fi rmation window opens. 4. U se the ▲ or ▼ key to[...]

14. Ser vice men u 14.8 Save custom settings What is done? The current custom settings c an be saved to the internal b ackup device in the same way as it would be done when the projector was switched to standby . How to save 1. P ress MENU to activate the menus. 2. U se the ▲ or ▼ key to select Ser vice and press ENTER . The service window open[...]

14. S ervice m enu Y es will switch the projec tor in re fi ll mode. When No is se lected, the proj ector stays in normal mode. Image 14-54 Image 14-55 Image 14-56 C AUTION : Restart of the projector is necessary to terminate the re fi ll mode. B efore restarting, switch off the projector and reinstall fi rst the coolin g circ uit. 14.10 Broadca[...]

14. Ser vice men u When Broadcast mode O N, switch also Genlock to ON ( Input → I nput loc king → Automati c + Opti ons )a n d enter the correct values for t his source. 14.1 1 USB m emory What is possible with an USB device? An USB device, F A T 16 formatted can be used, to save custom settings f rom the projector or t o load custom settings t[...]

14. S ervice m enu The custom settings on the pr ojector are stor ed on the USB device together wit h the serial number of the projector . Different saves can be made from different projectors on the same US B device. When there is no US B device connected to the USB slot, a message, No USB dev ice found , is displayed. Image 14-59 Image 14-60 Imag[...]

14. Ser vice men u 178 R5976986 FLM HD18 15/03/2010[...]

15. Mainte nance 15. MAI NTENAN CE About this chapter This chapter contai ns detailed maintenance procedures l ike dust fi lter replacement, lens cleaning etc. These procedures can easily be performed by t he operator of t he projector . C AUTION : All HEP A fi lters of the projector must be repla ced on a regular basis, dep ending on the en viro[...]

15. Mainte nance C AUTION : Never install a used HEP A fi lter . Always install a new HEP A fi lter . 15.2 R eplaceme nt of the dust fi lter o n the bottom side Necessary p arts • New H EP A dus t fi lter for the bott om side (R9854480). • 2.5 mm Allen k ey . How to repla ce the HEP A du st fi lter on the bottom side of the pr ojector ? 1.[...]

15. Mainte nance A A Image 15-4 7. R einstall the side cover of the projector , se e "Installation of t he side cover", page 195. C AUTION : Never install a used HEP A fi lter . Always install a new HEP A fi lter . 15.3 Replacement of the dust fi lter on the top side Necessary p arts New HEP A dust fi lter for the t op side (R9854480)[...]

15. Mainte nance 2. C heck the pressure indicated on the internal manometer of the liquid cooling circuit. 1 0 . 5 Image 15-6 3. T his pressure should be between 0,5 and 1 bar . If the pressure, indicated on the manometer , is out of range, inform the respon- sible and quali fi ed technicians, s o they may take necessary corrective action. 4. R ei[...]

16. Ser vic ing 16. SER VICING About this chapter This chapter contains general servicing procedures like lamp replacement, input unit replacement etc. Note that some of these procedures may only be performed by quali fi ed tec hnical service personnel. Overview • Removal of the lamp hous e • Removal of the input & com munication unit • [...]

16. Ser vicin g 4. C lasp the lamp house by the handles and pull the lamp house out of the projector . Image 16-2 While starting up the projector , t he electronics detect if a lamp is installed. If no lamp is installed, it is not possible to start up the projector . 16.2 Removal of the input & communication unit W ARNING : This proc edure may [...]

16. Ser vic ing Image 16-4 16.3 Removal of an input module The pro cedure b elow is a pplica ble t o all i nput modu les of t he input & comm unicat ion u nit of t he proj ector . Necessary t ools Phillips screw driver PH1. How to remove an input module out of the i nput & communication unit of the projector ? 1. S witch off the projector a[...]

16. Ser vicin g Image 16-6 C AUTION : Ensure that all unused input slots of the input & com munication unit are always covered with a dummy front plate. After removing one of the input modules, immediately replace with an other o ne or install a dummy front cover on the unused input slot. 16.4 Installation of the lamp house W ARNING : This proc[...]

16. Ser vic ing 4. P ush the lamp house forward until it slides fully into the pr ojector . 5. S ecure the correct posit ion of the lamp hous e by tightening all three spri ng lock screws as il lustrated. Image 16-8 6. R einstall the lamp cover of the proj ector , see "Installation of the lamp cover", page 196. While starting up the proje[...]

16. Ser vicin g Image 16-9 4. P ush the input & c ommunication unit forward unti l you feel the connectors of t he unit fi t in their sockets. The back of the front plate of the unit must touch the chassis of the projector . 5. S ecure the input & c ommunication unit by fastening the four captive screws in the c orners of the unit. Image 1[...]

16. Ser vic ing G Image 16-1 1 3. P ush the input module forward until you feel that the connector of the input module fi ti nt h e socket of the input slot. The back of the front plate of the module must touch the front pl ate of the input & communication unit. 4. S ecure the input module by fasteni ng both captive screws in the top c orners [...]

16. Ser vicin g A Image 16-13 5. S witch off the pr ojector , wait fi ve minutes and unplug the power cord at the projector side. 6. R einstall the cover of the lamp, see "Installation of the lamp cover", page 196. 190 R5976986 FLM HD18 15/03/2010[...]

17. Rem oval of th e proj ector cov ers 17. REMOV AL OF THE PROJECTOR COVERS About this chapter Most maintenance and servicing procedures deman d removing one or more of the projector covers to gain access to the parts to maintain or to service. T o avoid r edundancy , all procedures about cover removing or installing are grouped together in this c[...]

17. R emov al of t he p rojec tor co ve rs Image 17-2 17.2 R em oval of the si de cov er C AUTION : Remove the side cover of the projector only in a clean and dust free area. Never remove the side cover in an area which is subject to airborne contaminants such as that produc ed by smoke m achines or similar . Necessary t ools 7m m fl at s crew d r[...]

17. Rem oval of th e proj ector cov ers 17.3 Rem ova l of th e lam p co ve r W ARNING : This proc edure may onl y be perf ormed by qual i fi ed technical service personnel. Necessary t ools 7m m fl at s crew d river . How to remove the lamp cover of the projector ? 1. R elease the two captive screws at the top and bottom right side of the lamp c [...]

17. R emov al of t he p rojec tor co ve rs Image 17-7 2. R emove the input cover from the projector doing the f ollowing: a) gently pull out the right bottom corner (A) of the input c over , b) then gently pull out the right top corner ( B) of the input cover , c) then move the input cover away from the projector (C). Image 17-8 17.5 Installation o[...]

17. Rem oval of th e proj ector cov ers Image 17-9 4. S ecure the front cov er by locking the c aptive screw in the mi ddle at the bottom of the front cover . Image 17-10 5. R einstall the rubber dust ring around the lens holder . See im age 17-10. 17.6 Installation of the side cover Necessary t ools 7m m fl at s crew d river . How to install th e[...]

17. R emov al of t he p rojec tor co ve rs Image 17-12 4. S ecure the side cover by locking the captive screw in t he middle at the bottom of the side cover . Image 17-13 17.7 Installation of the lamp cover Necessary t ools 7m m fl at s crew d river . How to install the lamp cover of t he proje ctor ? 1. Install the lamp cov er of the projector do[...]

17. Rem oval of th e proj ector cov ers 17.8 Installation of the input cover Necessary t ools 7m m fl at s crew d river . How to install the input cover of the projector ? 1. Install the input cover of the projector doing the following: a) Bring the input cover towards its fi nal position (A), b) then gently push the locking stud at the right top[...]

17. R emov al of t he p rojec tor co ve rs 198 R5976986 FLM HD18 15/03/2010[...]

A. Dimens ions A. DIMENSIONS Overview • Dimensions of the FLM HD18 • Dimensions of the FLM fl igh t c as e • Dimensions of the rigging clamps A.1 Dimensions of the FLM HD18 Dimensions 730 250 520 643 14.8 1 3 0 1 4 8 1 4 8 480 485 459 485 643 676.1 771.1 771.1 1040 598.05 483.5 512.6 310.5 47.5 115 25 78.05 47.5 43.5 (+9) Image A-1 Dimens io[...]

A. D imensio ns P o i n to fg r a v i t y 233 359 224.5 Image A-2 Dimens ions give n in m illime ters. A.2 D imensions of the FLM fl ight case Dimensions 1194 6 6 0 8 1 7 . 5 8 0 8 1175 819 800 Image A-3 Dimens ions give n in m illime ters. 200 R5976986 FLM HD18 15/03/2010[...]

A. Dimens ions A.3 Dimensions of the r igging clamps Dimensions 99 50 M10 26.5 1 8 SW 17 40 4 5 3 0 3 0 7 5 2 9 . 8 2 1 2 0 Image A-4 Dimens ions give n in m illime ters. R5976986 FLM HD18 15/03/2010 201[...]

A. D imensio ns 202 R5976986 FLM HD18 15/03/2010[...]

B. Standa rd Sour ce Files B. ST ANDARD SOURCE FILES B.1 T able over view Ta b l e o v e r v i e w The following standar d image fi les are pre-programmed in the projector . Name 2 Fvert Hz 3 FHor kHz 4 Fpix MHz 5 Ptot 6 Pact 7 Ltot 8 Lact 9 640x350@85 8 5,079 37,860 31,500 832 640 445 350 640x400@85 8 5,079 37,860 31,500 832 640 445 400 640x480@6[...]

B. St andard S ource F ile s Name 2 Fvert Hz 3 FHor kHz 4 Fpix MHz 5 Ptot 6 Pact 7 Ltot 8 Lact 9 1400x1050RB@6 0 59,946 64,742 100,997 156 0 1400 1080 1050 1600x1200@60 60,001 75,002 162,004 2160 1600 1250 1200 1600x1200@65 64,998 81,248 175,496 2160 1600 1250 1200 1600x1200@70 69,997 87,497 188,993 2160 1600 1250 1200 1600x1200@75 74,998 93,747 20[...]

C. DMX chart C. DMX CHART Overview • DMX chart, basic • DMX chart, E xtended • DMX chart, Full C.1 DMX chart, basic Overview Chan- nel Functi on V alue Action 0 - 5 Mechanical shutter 1 Intensity 0 - 255 Electronic contrast 2 Function selection 0 - 7 no function 8 - 15 Layout 1 16 - 23 Layout 2 24 - 31 Layout 3 32 - 39 Layout 4 40 - 47 Layout[...]

C. DMX chart C.2 DMX c hart, Extended Overview Chan- nel Funct ion V alue Default Acti ons 0 - 5 Mechanical shutter closed 1 Intensity 0-2 5 5 Contrast 0 - channel 3 2 Brightness 0 - 255 128 Adjusts the brightness between 0 and 100% (SLM/XLM doesn’t adjust on DVI) 3 Contrast 0 - 255 128 A djusts the contrast between 0 and 100% (SLM /XLM doesn’t[...]

C. DMX chart Chan- nel Funct ion V alue Default Acti ons 9 Zoom (LSB) 0 - 255 Fine zoom adjustment 0 - 7 Lamp power 100% 8 - 15 Lamp power 98% 16 - 23 Lam p power 96% 24 - 31 Lam p power 94% 32 - 39 Lam p power 91% 40 - 47 Lam p power 89% 48 - 55 Lam p power 86% 56 - 63 Lam p power 84% 64 - 71 Lam p power 82% 72 - 79 Lam p power 80% 80 - 87 Lam p p[...]

C. DMX chart Chan- nel Functi on V alue Default Actio n 0 - 7 No function 8 - 15 Layout 1 (executi on takes 5 sec) 16 - 23 Layout 2 (execution takes 5 sec ) 24 - 31 Layout 3 (execution takes 5 sec ) 32 - 39 Layout 4 (execution takes 5 sec ) 40 - 47 Layout 5 (execution takes 5 sec ) 48 - 55 Layout 6 (execution takes 5 sec ) 56 - 63 Layout 7 (executi[...]

C. DMX chart Chan- nel Functi on V alue Default Actio n 0 - 26 0 P owered at 100% 27 - 52 Powered at 98% 53 - 79 Powered at 96% 80 - 105 Powered at 94% 106 - 131 Powered at 91% 132 - 157 Powered at 89% 158 - 183 Powered at 86% 184 - 209 Powered at 84% 210 - 235 Powered at 82% 9 Lamp Power 236 - 255 Powered at 80% 10 Free 0 - 255 R5976986 FLM HD18 1[...]

C. DMX chart 210 R5976986 FLM HD18 15/03/2010[...]

D. Trou bleshoot ing D. TROUBLESHOOTI NG D.1 Error codes Overview When the error code i s preceded by a ’-’ sign, then the error means a real error f or the projector . When the error code is preceded by a ’ +’ sign, then the error code means a warning. The projector does not fail yet, but take care for the warning and tr y to resolve the p[...]

D. Troubles hooting Error code Description Error W arning Caused by Action 2802 LPS s tart failed Ye s - LPS ( address 0x28) Replace LPS 2203 BOOST sta rt failed Ye s - LPS (address 0x20) Replace LPS 2503 BOOST sta rt failed Ye s - LPS (address 0x22) Replace LPS 2803 BOOST start failed Ye s - LPS (address 0x28) Replace LPS 2206 Lamp ignition failed[...]

D. Trou bleshoot ing Error code Description Error W arning Caused by Action 7694 Red front DMD temp high Y es Y es High temperature on red DMD Che ck if air slots are fr ee. Clean air fi lters. If problem persists, call a quali fi ed service engineer 7693 Red front DMD temp open Y es Y es T emperature sensor on Red DMD not connected Call a quali [...]

D. Troubles hooting Error code Description Error W arning Caused by Action 7664 Blue block temp high Y es Y es High temperature on blue DMD cooling block Check if air slots are fr ee. Clean air fi lters. If problem persists, call a quali fi ed service engineer 7663 Blue block temp open Y es Y es T emperature sensor on blue DMD cooling block not c[...]

D. Trou bleshoot ing Error code Description Error W arning Caused by Action 7980 Blue DMD temp high Y es Y es high temperature on dmd c heck if air slot are free; clean air fi lte rs If problem persists, call a quali fi ed service engineer 7978 Lamp temp high Y es Y es high temperature lamp check if air slot are free; clean air fi lters If pro b[...]

D. Troubles hooting Error code Description Error W arning Caused by Action 7954 VTEC v oltage high No Y es supp ly voltage for DMD cooling too high If problem persists, call a quali fi ed service engineer 7953 VMTR voltage lo w No Y es supp ly voltage for motors too low If p roblem persists, call a qu ali fi ed service engineer 7952 VMTR voltage [...]

D. Trou bleshoot ing Error code Description Error W arning Caused by Action 9398 Maximum image fi les reached Y es No Reaching the maximum allowed number of fi les Delete some unnecessary fi les 10498 Unsupported module Ye s N o M odule with obsolete fi rmware Call a quali fi ed se rv ic e eng i neer R5976986 FLM HD18 15/03/2010 217[...]

D. Troubles hooting 218 R5976986 FLM HD18 15/03/2010[...]

E. Sp ecifica tions E. SPECIFICA TIONS Overview •S p e c i fi cations FLM HD18 •S p e c i fi cations FLM 5 cable input (multi purpose) •S p e c i fi cations FLM HDSDI – SDI input •S p e c i fi cations FLM DVI input •S p e c i fi cations FLM DVI HDCP input E.1 Spec i fi cations FLM HD18 Overview Light Out put 16,000 Ansi lumen 18,0[...]

E. Spec ifica tio ns Communication • 1x RS-232C IN (D-9 connector) • 1x RS-232C OUT (D-9 connector) • 1x RS-232C IN (XLR connector) • 2x prop. protocol (RJ45 connector) • mini-jack for wired rem ote control Co mp ati b ilit y • All current video sour ces (P AL, SECAM , NTSC) in Composite, S-VHS, Compone nt or RGB formats • All current[...]

E. Sp ecifica tions E.2 Spec i fi cations FLM 5 cable input (m ulti purpose) Front view 5 cable input SYCN OK SEL 5-C ABL E I NPU T R/P R G/ Y/VI DE O B/ P B H/S V/C R Image E-1 Signal connectivity Input signal R/P R G/Y/ V I D E O B / P B H/S V/ C R RGBHV R G BHV RGBS R G B S composite sync or VIDEO as sync — RGsB R Gs sync on green B —— Co[...]

E. Spec ifica tio ns • Diagnostic LED’s on front panel: - Green LED: Lights up in case input module is selected - Y ellow LED: Lights up in case sync detected E.3 Spec i fi cations FLM HDSDI – SDI input Input front view HDSDI – SDI input HDSD I - SDI inpu t Input 1 Input 2 Loop output Sync OK Sel Image E-2 Speci fi cations • SD SMPT E 2[...]

E. Sp ecifica tions E.4 Speci fi cations FLM DVI input Input front view Sync OK Sel DVI inpu t Image E-3 Speci fi cations • DVI type: DVI-I (DV I-Integrated) , but the analog signals are not supported. Single-link con fi guration. • Single link dvi for pixelclocks up to 165MHz • V erti cal frequencies: 24 - 75 Hz • Horizontal frequencies[...]

E. Spec ifica tio ns 224 R5976986 FLM HD18 15/03/2010[...]

F. Order info F . OR DER INFO F .1 Spare part order info Order info: Order inf o Descri ptio n R9854490 F LM/SLM adaptor plate (f or stacking an SLM proj ector upon an FLM project or). R9854540 FLM lamp house (3.5kW lamp included). R9854541 FLM lam p house refurbish (3.5k W lamp included). R9854430 5 Cable input module. R9854440 High ba ndwidth dat[...]

F. Order info 226 R5976986 FLM HD18 15/03/2010[...]

Glos sary GLOSSAR Y 2:2 p ull- down The process of transfer ring 24-frames/sec fi lm format int o video by repeating each frame (used f or P AL DVD ’ s) as two video fi elds. (A D) 3:2 p ull- down Method used to map the 24 f ps of fi lm onto the 30 fps (60 fi elds) or 25 fps (50 fi elds), so that one fi lm frame occupies three video fi eld[...]

Glos sary HDCP High-bandwidth Digital Content Protection (HDCP) is a form of digital copy protecti on developed by Intel Corporation to protect digi tal audio and video content as it travels across Dis playPort, Digital Vi sual Interface (DVI), High-De fi nition Multi media Interface (HDMI), Gigabit Vi deo Interface (GVIF), or Uni fi ed Display I[...]

Index INDEX A Address 52 Program 52 RCU 52 Adjustment 49–50 Quick set up 49–50 Lens 49 Lens functions 50 Lens key 49 PIP 5 0 Adjustment mode 55 –57 About 55 LCD display menus 56 Local keypad 55 Menu memo ry 57 Navigation 56 On screen menus 56 RCU 55 Sta rt u p 55 T est patterns 57 Air fl ow 16 Align 25– 26, 33 Ceiling mount 26 Sta cke d 33[...]

Index DMX universe 152 Download plug-in 16 Download Projector T oolset 16 Dust fi lter 179–181 Bottom 180 Front 179 T op 181 E Error codes 21 1 Error logging 170 Start up 170 Ethernet 40 Exterior 182 Cleaning 182 F Fan speeds 168 Diagnosis 168 File services 88 Manual load fi le 88 Film mode detection 86 Flight case 12 Front projection 12 Fuses [...]

Index Selection 130 IR communication 38 IR control 151 K Keyston e 1 18 L Lamp 1 1 1–1 13, 189 Identi fi cation 1 13 Overview fl o w 111 Powe r 1 12 Power mode 1 1 1 Realign 189 Z-ax is 1 13 Lamp house 183, 186 Install 186 Remove 183 Lamp identi fi cation 1 13 Lamp pow er 1 12 Lamp power mode 1 1 1 Language 51, 160 Selection 51, 16 0 Layout 95[...]

Index Shortcut keys 157 Standby 156 IR control 151 Language 160 Selection 160 Local LCD 159 Local LCD contrast 160 Local LCD time out 159 Menu position 158–159 Bar scale 15 9 On screen menu 158 Network 147–150 DHCP 148 Gatewa y 150 Introducti on 148 IP-address 149 Subnet-mask 149 Projector address 144–145 Address 144 Common address 145 Serial[...]

Index Diagnosis 169 Stacked 33 Al ign 3 3 Stacking 31 Start up 46, 55 Adjustment mode 55 Errors and warnings 46 Startup e rrors 46 Startup warnings 46 Suspend 26 Projector 26 Switching off 47 Switching to standby 46 T T able mount 2 5 Al ign 2 5 T emperatures 167 Diagnosis 167 T est patterns 57 Adjustment mode 57 T ext on/off 49 T ilt range 15 T im[...]

Index 234 R5976986 FLM HD18 15/03/2010[...]

Revision S heet To : Barco nv Events/Documentation Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.82.1 1, Fax: +32 56.36.88.24 E-mail: service.mne@ba rco.com, Web: ww w .barco.com From: Date: Please correct the f ollowing points in t his documentation ( R5976986/08 ): page wrong correct R5976986 F LM HD18 15/03/2010[...]