Barco R9001330 Bedienungsanleitung

OWNER'S MANUAL GRAPHICS 8200 R9001330 Art. No. :R5975288 Date: 110497 BARCO PROJECTION SYSTEMS OWNER'S MANUAL GRAPHICS 8200 R9001330 Art. No. :R5975288 Date: 110497 BARCO PROJECTION SYSTEMS[...]

Due to constant research, the information in this manual is subject to change without notice. Produced by BARCO NV, April 1997. All rights reserved. Trademarks are the rights of their respective owners. Printed in Belgium Due to constant research, the information in this manual is subject to change without notice. Produced by BARCO NV, April 1997. [...]

Table of Contents 5975288 BARCOGRAPHICS 8200 110497 i-1 Table of Contents 5975288 BARCOGRAPHICS 8200 110497 i-1 WARNINGS & SAFETY INSTRUCTIONS ....................................................................................................................................... 1- 1 AVERTISSEMENTS & PRESCRIPTIONS DE SECURITE ...............[...]

Table of Contents i-2 5975288 BARCOGRAPHICS 8200 110497 Table of Contents i-2 5975288 BARCOGRAPHICS 8200 110497 RGB analog input module. ....................................................................................................... ............................................ 7-6 Component input module. ....................................[...]

Table of Contents 5975288 BARCOGRAPHICS 8200 110497 i-3 Table of Contents 5975288 BARCOGRAPHICS 8200 110497 i-3 Gamma ............................................................................................................................................................................ 11-15 Geometry ............................................[...]

Table of Contents i-4 5975288 BARCOGRAPHICS 8200 110497 Table of Contents i-4 5975288 BARCOGRAPHICS 8200 110497 Hardwired RCU. .................................................................................................................................................................. 14-2 RCVDS 05 ..............................................[...]

Safety Instructions 5975288 BARCOGRAPHICS 8200 110497 1-1 Safety Instructions 5975288 BARCOGRAPHICS 8200 110497 1-1 WARNINGS AVERTISSEMENTS Safety instructions Prescriptions de securite On safety Securite On installation Installation On servicing Entretien et reparation On cleaning Nettoyage On repacking R e-emballage On illumination E clairage WAR[...]

Prescription de sécurtié 1-2 5975288 BARCOGRAPHICS 8200 110497 Presciptions de sécurité 1-2 5975288 BARCOGRAPHICS 8200 110497 Remarque sur la Sécurité Les projecteurs sont fabriqués conformément aux exigences des normes de sécurité internationales IEC950, UL 1950 et CSA C22.2 No. 950. Ces normes de sécurité sont imposées aux équipemen[...]

Safety Instructions 5975288 BARCOGRAPHICS 8200 110497 1-3 Safety Instructions 5975288 BARCOGRAPHICS 8200 110497 1-3 Notice on safety Projectors are built in accordance with the requirements of the international safety standards IEC950, UL 1950 and CSA C22.2 No. 950, which are the safety standards of information technology equip- ment including elec[...]

Prescription de sécurtié 1-4 5975288 BARCOGRAPHICS 8200 110497 Presciptions de sécurité 1-4 5975288 BARCOGRAPHICS 8200 110497 RISQUE D'ELECTRO- CUTION NE PAS OUVRIR ATTENTION ATTENTION : AFIN DE REDUIRE LE RISQUE DE CHOCS ELECTRIQUES, NE PAS ENLEVER LE COUVERCLE (OU LE DOS) IL N'Y A PAS DE PIECES REPARABLES PAR L'UTILISATEUR A L&[...]

Safety Instructions 5975288 BARCOGRAPHICS 8200 110497 1-5 Safety Instructions 5975288 BARCOGRAPHICS 8200 110497 1-5 The lightning flash with an arrowhead within a triangle is intended to tell the user that parts inside this product are risk of electrical shock to persons. The exclamation point within a triangle is in- tended to tell the user that i[...]

Prescription de sécurtié 1-6 5975288 BARCOGRAPHICS 8200 110497 Presciptions de sécurité 1-6 5975288 BARCOGRAPHICS 8200 110497 Instructions pour l’utilisateur : Si cet équipement cause des interférences de radio ou de télévision, l’utilisateur peut essayer de corriger les interférences en appliquant une ou plusieurs de les mesures suiva[...]

Safety Instructions 5975288 BARCOGRAPHICS 8200 110497 1-7 Safety Instructions 5975288 BARCOGRAPHICS 8200 110497 1-7 Instructions to the user : if this equipment does cause interference to radio or television reception, the user may try to correct the interference by one or more of the following measures : - Re-orientation of the receiving antenna f[...]

Prescription de sécurtié 1-8 5975288 BARCOGRAPHICS 8200 110497 Presciptions de sécurité 1-8 5975288 BARCOGRAPHICS 8200 110497 * Pour débrancher le cordon, le tirer par le connecteur, jamais par le cordon lui-même. * Si on utilise une rallonge, vérifier que le total des courants des appareils raccordés à cette rallonge ne dépasse pas la ca[...]

Safety Instructions 5975288 BARCOGRAPHICS 8200 110497 1-9 Safety Instructions 5975288 BARCOGRAPHICS 8200 110497 1-9 * To disconnect the cord, pull it out by the plug. Never pull the cord itself. * If an extension cord is used with this product, make sure that the total of the ampere ratings on the products plugged into the extension cord does not e[...]

Prescription de sécurtié 1-10 5975288 BARCOGRAPHICS 8200 110497 Presciptions de sécurité 1-10 5975288 BARCOGRAPHICS 8200 110497 * Laisser suffisamment d’espace autour du projecteur et ne pas obstruer la circulation de l’air. Ne pas mettre des feuilles libres ou d’autres objets plus près de 11 cm du projecteur. Entretien et Réparation Ne[...]

Safety Instructions 5975288 BARCOGRAPHICS 8200 110497 1-11 Safety Instructions 5975288 BARCOGRAPHICS 8200 110497 1-11 * Do not block the projector cooling fans or free air movement under and around the projector. Loose papers or other objects may not be nearer to the projector than 4" on any side. On Servicing Do not attempt to service this pr[...]

Prescription de sécurtié 1-12 5975288 BARCOGRAPHICS 8200 110497 Presciptions de sécurité 1-12 5975288 BARCOGRAPHICS 8200 110497 Pour garantir les meilleures performance et définition, les objectifs de projection sont spécialement traités avec un revêtement anti-reflets. En conséquence : éviter de toucher les objectifs. Pour enlever la pou[...]

Safety Instructions 5975288 BARCOGRAPHICS 8200 110497 1-13 Safety Instructions 5975288 BARCOGRAPHICS 8200 110497 1-13 To ensure the highest optical performance and resolution, the projection lenses are specially treated with an anti-reflective coating, therefore : avoid touching the lens. To remove dust on the lens, use a soft dry cloth. Do not use[...]

Unpacking & Dimensions 5975646 BARCOGRAPHICS 8100 090296 Unpacking & Dimensions 5975646 BARCOGRAPHICS 8100 090296 2-1 2-1 UNPACKING DIMENSIONS BATTERY INSTALLATION ON THE RCU UNPACKING DIMENSIONS BATTERY INSTALLATION ON THE RCU[...]

Unpacking & Dimensions 2-2 5975646 BARCOGRAPHICS 8100 090296 Unpacking & Dimensions 2-2 5975646 BARCOGRAPHICS 8100 090296 Unpacking To open the banding, pull on the clip as shown in the first drawing. Take the projector out of its shipping carton and place it on a table. For transportation, the projector is mounted on a wooden board with 3 [...]

Unpacking & Dimensions 5975646 BARCOGRAPHICS 8100 090296 Unpacking & Dimensions 5975646 BARCOGRAPHICS 8100 090296 2-3 2-3 Name lens L min L max (*) mm(inch) mm(inch) HD(1.2:1) 1072 (42.20) 1087 (42.79) HD(2.2:1) 1043 (41.06) 1070 (42.12) HD(3.3:1) 1017 (40.04) 1072 (42.20) HD(3.9:1) 1022 (40.24) 1162 (45.75) HD(5:1) 1082 (42.60) 1202 (47.32[...]

Unpacking & Dimensions 2-4 5975646 BARCOGRAPHICS 8100 090296 Unpacking & Dimensions 2-4 5975646 BARCOGRAPHICS 8100 090296 Battery installation in the RCU. A battery (not yet installed to save the battery life time) is delivered inside the plastic bag with the power cord. To install the battery, remove the battery cover on the backside of th[...]

Installation Guidelines 5975288 BARCOGRAPHICS 8200 110497 3-1 Installation Guidelines 3-1 5975288 BARCOGRAPHICS 8200 110497 INSTALLATION GUIDELINES Environment What about ambient light? Which screen type? What image size? How big should the image be? Where to install the projector? How to install the projector? INSTALLATION GUIDELINES Environment W[...]

Installation Guidelines 3-2 5975288 BARCOGRAPHICS 8200 110497 Installation Guidelines 5975288 BARCOGRAPHICS 8200 110497 3-2 Installation guidelines Careful consideration of things as image size, ambient light level, projector placement and type of screen to use are critical to the optimum use of the projection system. Max. ambient temperature : 40?[...]

Installation Guidelines 5975288 BARCOGRAPHICS 8200 110497 3-3 Installation Guidelines 3-3 5975288 BARCOGRAPHICS 8200 110497 * Which screen type? There are two major categories of screens used for projection equipment. Those used for front projected images and those for rear projection applications. Screens are rated by how much light they reflect ([...]

Installation Guidelines 3-4 5975288 BARCOGRAPHICS 8200 110497 Installation Guidelines 5975288 BARCOGRAPHICS 8200 110497 3-4 * Where to install the projector? Definitions of the Abbreviation on drawings B = Distance between ceiling and top of the screen or between floor and bottom of the screen. A = Correction value, distance between bottom side of [...]

Installation Guidelines 5975288 BARCOGRAPHICS 8200 110497 3-5 Installation Guidelines 3-5 5975288 BARCOGRAPHICS 8200 110497 Table mounting of the BARCOGRAPHICS 8200 Ceiling mounting of the BARCOGRAPHICS 8200 Screen PD B Ceil ing Proje ct or CD A CD = B - A SH Optical axis proj ection lens SH SW SIDE VIEW BACK VIEW Screen BOT TOM VI EW SW Ceiling Sc[...]

Installation Guidelines 3-6 5975288 BARCOGRAPHICS 8200 110497 Installation Guidelines 5975288 BARCOGRAPHICS 8200 110497 3-6 * How to install a projection lens? The BARCOGRAPHICS 8200 is supplied without any lens. The following lenses are available as an option : HD(1.2:1) HD(2.2:1) HD(3.3:1) HD(4.0:1) HD(5:1) HD(7:1) HD(1.5-3:1) HD(3.0-5.3:1) WHD(3[...]

Installation Set Up Installation Set Up 5975288 BARCOGRAPHICS 8200 110497 4-1 4-1 5975288 BARCOGRAPHICS 8200 110497 INSTALLATION SET UP Projector configuration INSTALLATION SET UP Projector configuration[...]

Installation Set Up 4-2 Installation Set Up 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 4-2 The BARCOGRAPHICS 8200 can be installed to project images in four different configurations : front/table, front/ceiling, rear/table and rear/ceiling. Rear/ Tab le Rear /Ceili ng Fr ont/Tab le Fr ont/C ei ling The BARCOGRAPHICS 8200 ca[...]

Installation Set Up Installation Set Up 5975288 BARCOGRAPHICS 8200 110497 4-3 4-3 5975288 BARCOGRAPHICS 8200 110497 To change the Configuration, enter the adjustment mode by pushing ADJUST or ENTER . Highlight Installation by pushing the control disk up or down and press ENTER to select. The installation menu will be displayed. ENTER displays the I[...]

Location and Functions of Control 5975288 BARCOGRAPHICS 8200 110497 5-1 Location and Functions of Control 5975288 BARCOGRAPHICS 8200 110497 5-1 LOCATION AND FUNCTION OF CONTROLS Front panel terminology Local keypad Remote control LOCATION AND FUNCTION OF CONTROLS Front panel terminology Local keypad Remote control[...]

Location and Functions of Control 5-2 Location and Functions of Control 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 5-2 Front panel terminology RS 23 2 IN REM OTE PR OJ ECT OR MODE : GR EEN - O PERAT ION RE D - S TA NDB Y COMM UNICA TION PORT (800-PERIPHERALS) 100 - 230 V 9 - 4 A 60 - 50 Hz RS232 OUT 0 I This device c omplie[...]

Location and Functions of Control 5975288 BARCOGRAPHICS 8200 110497 5-3 Location and Functions of Control 5975288 BARCOGRAPHICS 8200 110497 5-3 Control Panel Terminology a. Local keypad Getting access 2 1 4 3 56 8 0 9 7 The keypad is located behind a door, screened with the name of the projector. To open the door, push once on the indicated side of[...]

Location and Functions of Control 5-4 Location and Functions of Control 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 5-4 - + - + - + - + - + 0 9 7 8 6 5 4 3 2 1 ENTER 14 13 12 9 8 1 2 3 4 5 7 15 32a PAUSE - + PHASE FREEZ 10 11 TEXT EXI T ADJ STBY SHARPNESS TINT COLOR BRI GHT NES S CONT RAST HEL P ? 6 COL OR PH ASE SHARPN TI N[...]

Location and Functions of Control 5975288 BARCOGRAPHICS 8200 110497 5-5 Location and Functions of Control 5975288 BARCOGRAPHICS 8200 110497 5-5 Terminology Back light key : when activated, all keys will be lighted up and visible in the dark. ADJ. : ADJUST key, to enter the adjustment mode or for quick exit in the adjustment mode. A ddress key (sunk[...]

Power Connection Power Connection 5975288 BARCOGRAPHICS 8200 110497 6-1 6-1 5975288 BARCOGRAPHICS 8200 110497 POWER CONNECTION POWER CONNECTION[...]

Power Connection 6-2 Power Connection 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 6-2 Power (mains) cord connection DECODER MAC-INPUT VIDEO-INPUT VIDEO S-VIDEO VGA-INPUT RS 232 IN REMOTE PROJECTOR MODE : GREEN - OPERATION RED - STANDBY COMMUNICATION PORT (800-PERIPHERALS) 100-240Vac 10-4.5A VIDEO S-VIDEO Use the supplied pow[...]

Power Connection Power Connection 5975288 BARCOGRAPHICS 8200 110497 6-3 6-3 5975288 BARCOGRAPHICS 8200 110497 When switching on with the power switch, the projector starts in the stand by mode. The projector mode indication lamp is red. To start image projection : a. press the 'Stand by' button on the local keypad or on the remote control[...]

Power Connection 6-4 Power Connection 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 6-4 When the total run time of the lamp is 970 hours or more, the following message will be displayed for 1 minute. This message will be repeated every 30 minutes. Press EXIT to remove the message before the minute is over. When the total run t[...]

Connections Connections 5975288 BARCOGRAPHICS 8200 110497 7-1 7-1 5975288 BARCOGRAPHICS 8200 110497 INPUT MODULE CONNECTIONS Module insertion into the projector. Video/S-Video input module RGB analog input module Component input module RGB3S/RG3sB input module Peripheral equipment connection Connecting a computer Connecting a RCVDS05 Connecting a V[...]

Connections Connections 7-2 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 7-2 The projector has modular input facilities. The input slots can be filled up with the following modules : Video, S-video (PAL, SECAM, NTSC) input order no. R9827900 RGBS/RGsB analog input order no. : R9827910 RGB3S/RG3sB input order no. : R9827920 Co[...]

Connections Connections 5975288 BARCOGRAPHICS 8200 110497 7-3 7-3 5975288 BARCOGRAPHICS 8200 110497 Video/S-video input module To the Video input : Composite video signals from a VCR, OFF air signal decoder, etc... 1 x BNC 1.0Vpp ± 3 dB To the S-Video input : Separate Y-luma/C-chroma signals for higher quality playback of Super VHS-signals. 1 x 4 [...]

Connections Connections 7-4 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 7-4 Push the Control disk up or down to highlight Installation and press ENTER to display the Installation menu. EXIT returns to operational mode. ADJUSTMENT MODE Select a path from below : GUIDED RANDOM ACCESS INSTALLATION SERVICE Source 01 Select with [...]

Connections Connections 5975288 BARCOGRAPHICS 8200 110497 7-5 7-5 5975288 BARCOGRAPHICS 8200 110497 Straps on module level. Floating or non-floating input. Video input : J11 : strap "yes" : non floating strap "no" : floating S-Video input : J12 : strap "yes" : non floating strap "no" : floating J13 : strap &q[...]

Connections Connections 7-6 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 7-6 RGB analog input terminals with separate Horizontal and Vertical sync inputs(RGB-HV), with Composite sync input(RGB-S) or with Sync signals on green(RGsB). Always use an interface when a computer and local monitor have to be connected to the projecto[...]

Connections Connections 5975288 BARCOGRAPHICS 8200 110497 7-7 7-7 5975288 BARCOGRAPHICS 8200 110497 RGB input selection : Key in the corresponding slot number on the RCU or the local keypad. Straps on module level : Floating or non-floating input. Red : J3 : strap "yes" : non floating strap "no" : floating Green : J4 : strap &qu[...]

Connections Connections 7-8 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 7-8 ADJUSTMENT MODE Select a path from below : GUIDED RANDOM ACCESS INSTALLATION SERVICE Source 01 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. INPUT SLOTS 1. RGB-SS [CV] 2. RGB-SOG 3[...]

Connections Connections 5975288 BARCOGRAPHICS 8200 110497 7-9 7-9 5975288 BARCOGRAPHICS 8200 110497 Component input module. Connect your component signals (Y-luma, R-Y and B-Y), e.g. a professional VCR to the Component input module. Component video : 4 x BNC R-Y : 0.7 Vpp ± 3 dB B-Y : 0.7 Vpp ± 3 dB Y : 0.7 Vpp ± 3 dB 1 Vpp ± 3 dB if Tri-level [...]

Connections Connections 7-10 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 7-10 Component input selection : Key in the corresponding slot number on the RCU or the local keypad. Indication on the input slot menu : Component Video-SS = Component video with separate sync Component Video-SOY = Component video with sync on Y Compon[...]

Connections Connections 5975288 BARCOGRAPHICS 8200 110497 7-11 7-11 5975288 BARCOGRAPHICS 8200 110497 RGB3S/RG3sB input module. Connect your RGB signals with Tri-level sync, e.g. a professional VCR to the RGB 3 level sync input module. RGB3S/RG3sB analog : 5 x BNC Red : 0.7 Vpp ± 3 dB Blue : 0.7 Vpp ± 3 dB Green : 0.7 Vpp ± 3 dB 1 Vpp ± 3 dB if[...]

Connections Connections 7-12 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 7-12 Straps on module level : Floating or non-floating input. Red : J3 : strap "yes" : non floating strap "no" : floating Green : J4 : strap "yes" : non floating strap "no" : floating Blue : J5 : strap "yes&q[...]

Connections Connections 5975288 BARCOGRAPHICS 8200 110497 7-13 7-13 5975288 BARCOGRAPHICS 8200 110497 Connecting a computer, e.g. IBM PC (or compatible), Apple Macintosh to the RS 232 input of the projector. RS232 conne ction R G R G 100 - 230 V 9 - 4 A 60 - 50 Hz RS23 2 OUT 0 I This de v ice co mplies with Par t 15 of the FCC r ules. Opera tion i [...]

Connections Connections 7-14 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 7-14 Connecting a RCVDS 05 to the projector. - Up to 10 or 20 inputs(video) with the RCVDS 05 and 90 inputs when RCVDS's are linked via the expansion module. - Serial communication with the projector. - Remote control buttons on the RCVDS to contro[...]

Controlling Controlling 5975288 BARCOGRAPHICS 8200 110497 8-1 8-1 5975288 BARCOGRAPHICS 8200 110497 CONTROLLING How to use the RCU. Projector address How to display a projector address. How to program an address into the RCU. Picture controls with direct access. CONTROLLING How to use the RCU. Projector address How to display a projector address. H[...]

Controlling 8-2 Controlling 8-2 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 The BARCOGRAPHICS 8200 can be controlled with a. the RCU b. the hardwired RCU (cable is not included) c. the local keypad. Controlling the projector with the RCU and the hardwired RCU is equal. How to use the RCU? a) Point the front of the RCU to the[...]

Controlling Controlling 5975288 BARCOGRAPHICS 8200 110497 8-3 8-3 5975288 BARCOGRAPHICS 8200 110497 c) Point the front of the RCU directly at one of the IR sensors of the projector. 0 9 7 8 6 5 4 3 2 1 RCU Ce ilin g Front of projec tor IR sens or 0 9 7 8 6 5 4 3 2 1 RCU Rear of proj ect or IR sens or Table 0 I IR-ACKNOWLEDGE D IR-RECEIVED DIAGNOSTI[...]

Controlling 8-4 Controlling 8-4 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 How to display a projector address? Press the ADDRESS key (recessed key on the RCU) with a pencil. The projector's address will be displayed in a 'Text box'. This text box disappears after a few seconds. To continue using the RCU, it i[...]

Controlling Controlling 5975288 BARCOGRAPHICS 8200 110497 8-5 8-5 5975288 BARCOGRAPHICS 8200 110497 Contrast Control A correct 'contrast' setting is important for good image reproduction. Adjust the contrast to the level you prefer, according to room lighting conditions. Use the + button for a higher contrast. Use the - button for lower c[...]

Start Up of the Adjustment Mode 9-1 Start Up of the Adjustment Mode 9-1 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 START UP OF THE ADJUSTMENT MODE START UP OF THE ADJUSTMENT MODE[...]

Start Up of the Adjustment Mode 9-2 Start Up of the Adjustment Mode 9-2 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 Adjustment Mode All source set ups, picture tunings and geometry are made while in the 'Adjustment mode' . Press the ADJUST or ENTER key to enter the 'Adjustment mode'. You are now in the &a[...]

Start Up of the Adjustment Mode 9-3 Start Up of the Adjustment Mode 9-3 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 Some items in the Adjustment mode are password protected. While selecting such an item, the projector asks to enter your password (Password protection is only available when the password strap on the controller[...]

Guided Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 10-1 Guided Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 10-1 GUIDED ADJUSTMENT MODE GUIDED ADJUSTMENT MODE[...]

Guided Adjustment Mode 10-2 5975288 BARCOGRAPHICS 8200 110497 Guided Adjustment Mode 10-2 5975288 BARCOGRAPHICS 8200 110497 Select with or then <ENTER> <EXIT> to return. ADJUSTMENT MODE Select a path from below : GUIDED RANDOM ACCESS INSTALLATION SERVICE Source 01 The Guided Adjustment Mode is not active. The Guided Adjustment Mode is n[...]

Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-1 Random Access Adjustment Mode 11-1 5975288 BARCOGRAPHICS 8200 110497 RANDOM ACCESS ADJUSTMENT MODE File Service Picture Tuning Geometry RANDOM ACCESS ADJUSTMENT MODE File Service Picture Tuning Geometry[...]

Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-2 11-2 Starting up the Random Access Adjustment Mode Push the control disk up or down to highlight 'Random Access' and then press ENTER . ADJUSTMENT MODE Select a path from below : GUIDED RANDOM ACCESS INSTALL[...]

Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-3 Random Access Adjustment Mode 11-3 5975288 BARCOGRAPHICS 8200 110497 File service Before using a new source, a correct file has to be installed. The projector's memory contains a list of files corresponding to the most used sources. When the new source corresponds with one of[...]

Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-4 11-4 Load file Push the control disk up or down to select LOAD and press ENTER to display the Load menu. The Load menu displays the corresponding files depending on the installed filter. This filter can be "Fit&q[...]

Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-5 Random Access Adjustment Mode 11-5 5975288 BARCOGRAPHICS 8200 110497 Edit file The Edit file menu makes it possible to change the settings of the file according to the real settings of the connected source. Consult the source specification before entering the data. To start up the[...]

Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-6 11-6 up or down to scroll to desired digit. When finished press ENTER to confirm. c. counting up or down by pushing the control disk to the right or to the left. How finding the correct values for the displayed item? [...]

Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-7 Random Access Adjustment Mode 11-7 5975288 BARCOGRAPHICS 8200 110497 Options Source number : The source number of a non-active source can be changed to any other source number. This makes it possible to create a file for future source numbers. Clamp position : Clamping determines [...]

Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-8 11-8 Vertical refresh [sync/async] : The way of updating the image information on the LCD panels. For moving images, the vertical refresh has to be done on a synchronous way, for still images, asynchronous vertical re[...]

Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-9 Random Access Adjustment Mode 11-9 5975288 BARCOGRAPHICS 8200 110497 Rename To change the name of a selected file. Use the control disk to select RENAME and press ENTER . The Rename selection menu will be displayed. Select with or then <ENTER> <EXIT> to return. FILE SE[...]

Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-10 11-10 Copy To copy a selected file into a new file. Use the control disk to select COPY and press ENTER . The Copy selection menu will be displayed. Use the control disk to select a file name and press ENTER to selec[...]

Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-11 Random Access Adjustment Mode 11-11 5975288 BARCOGRAPHICS 8200 110497 Delete To delete a selected file out of the list of files. Use the control disk to select DELETE and press ENTER . The delete selection menu will be displayed. Select with or then <ENTER> <EXIT> to [...]

Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-12 11-12 File Options Use the control disk to select OPTIONS and press ENTER . The option selection menu will be displayed. Select with or then <ENTER> <EXIT> to return. FILE SERVICE LOAD EDIT RENAME COPY DE[...]

Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-13 Random Access Adjustment Mode 11-13 5975288 BARCOGRAPHICS 8200 110497 Sync slow/fast Highlight sync by pushing the control disk up or down and press ENTER to toggle between SLOW and FAST. Note : Sync is normally used in the SLOW position. The FAST position is used to compensate f[...]

Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-14 11-14 Color Balance Highlight Color Balance by pushing the control disk up or down and press ENTER to select the color balance selection menu. The next choices are possible : Fixed color balance : - 3200 K (reddish) [...]

Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-15 Random Access Adjustment Mode 11-15 5975288 BARCOGRAPHICS 8200 110497 Gamma With the gamma correction adjustment, it is possible to bring the details in dark image parts more to the front (lower image values) or to reduce the importance of these details (higher gamma values). To [...]

Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-16 11-16 Geometry Highlight Geometry by pushing the control disk up or down and press ENTER to select the geometry selection menu. The following adjustment are possible : - horizontal and vertical image shift. - horizon[...]

Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-17 Random Access Adjustment Mode 11-17 5975288 BARCOGRAPHICS 8200 110497 Size Highlight Size by pushing the control disk up or down and press ENTER to select. Select with or then <ENTER> <EXIT> to return. GEOMETRY SHIFT SIZE SIDE KEYSTONE BLANKING OPTIONS Fi xed si de s [...]

Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-18 11-18 Side keystone Highlight Side Keystone by pushing the control disk up or down and press ENTER to select. The side keystone adjustment is used to align the image if the projector is mounted as a non standard proj[...]

Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-19 Random Access Adjustment Mode 11-19 5975288 BARCOGRAPHICS 8200 110497 Blanking Highlight Blanking by pushing the control disk up or down and press ENTER to select. Select with or then <ENTER> <EXIT> to return. GEOMETRY SHIFT SIZE SIDE KEYSTONE BLANKING OPTIONS BLANKIN[...]

Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-20 11-20 BLANKING TOP BOTTOM LEFT RIGHT Select with or then <ENTER> <EXIT> to return. Adjustment of the blanking on the of the image Adjustment of the blanking on the bottom of the image Correct by pushing t[...]

Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-21 Random Access Adjustment Mode 11-21 5975288 BARCOGRAPHICS 8200 110497 Options Highlight Options by pushing the control disk up or down and press ENTER . The Geometry Options menu will be displayed. The next question will be asked by the projector : 'Use the same side keyston[...]

Installation 12-1 Installation 5975288 BARCOGRAPHICS 8200 110497 12-1 5975288 BARCOGRAPHICS 8200 110497 INSTALLATION Convergence Configuration Internal Patterns INSTALLATION Convergence Configuration Internal Patterns[...]

Installation 12-2 Installation 12-2 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 Starting up the Installation Mode Push the control disk up or down to highlight Installation and then press ENTER . Select with or then <ENTER> <EXIT> to return. ADJUSTMENT MODE Select a path from below : GUIDED RANDOM ACCESS INSTALLA[...]

Installation 12-3 Installation 5975288 BARCOGRAPHICS 8200 110497 12-3 5975288 BARCOGRAPHICS 8200 110497 Input Slots Highlight Input Slots by pushing the control disk up or down and press ENTER . The internal system will scan the input slots and displays the result in the Input Slots menu. Source indication Video or S-Video Video[Video] Video[S-Vide[...]

Installation 12-4 Installation 12-4 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 Convergence Highlight "Convergence" by pushing the control disk up or down and press ENTER to display the convergence selection menu. Every LCD panel has 6 adjustment screws. By turning these screws you change the relative position of t[...]

Installation 12-5 Installation 5975288 BARCOGRAPHICS 8200 110497 12-5 5975288 BARCOGRAPHICS 8200 110497 To adjust the convergence, there are test patterns provided in the convergence menu. Use the control disk to hightlight Convergence and press ENTER to display the Convergence menu. Start with the Green test pattern and continue with the Red on gr[...]

Installation 12-6 Installation 12-6 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 The three alignments influence each other, therefore repeat if neces- sary the above three steps (b,c and d). When the green pattern is correctly focused, press EXIT to return to the Convergence menu. Red on green convergence. Use the control dis[...]

Installation 12-7 Installation 5975288 BARCOGRAPHICS 8200 110497 12-7 5975288 BARCOGRAPHICS 8200 110497 If both lines are correctly converged, continue with screw 4. Adjust screw 4 until line 4 is correctly converged. It is possible that line 2 and 3 have to be reconverged. If so, repeat procedure for screw 2 and 3 (step b and c) If line 2, 3 and 4[...]

Installation 12-8 Installation 12-8 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 Blue on green convergence. Use the control disk to highlight Blue on green and press ENTER to display the Blue on green test pattern. Repeat the same procedure as for Red on green lines but read blue when red is indicated. Select with or then <[...]

Installation 12-9 Installation 5975288 BARCOGRAPHICS 8200 110497 12-9 5975288 BARCOGRAPHICS 8200 110497 Configuration Highlight "Configuration" by pushing the control disk up or down and press ENTER to select. For more information, see Projector configuration in chapter Installa- tion Set Up. Select with or then <ENTER> <EXIT>[...]

Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-1 Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-1 SERVICE MODE Identification Change Password Change Language Change Projector Address Change Baudrate PC Reset Lamp Run Time Lamp Run Time History Panel Adjustments Preset Color Balance I²C Diagnosis SERVICE MODE Identification Change Password Ch[...]

Service Mode 13-2 5975288 BARCOGRAPHICS 8200 110497 Service Mode 13-2 5975288 BARCOGRAPHICS 8200 110497 Starting up the Service Mode Push the control disk up or down to highlight Service and then press ENTER . Some items in the Service mode are password protected (when the password function is active). Enter your password to continue. All other pas[...]

Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-3 Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-3 SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS CHANGE BAUDRATE PC RESET LAMP RUNTIME LAMP RUNTINE HISTORY MORE... Select with or then <ENTER> <EXIT> to return. SERVICE PANEL ADJUSTMENTS PRESET INPUT BALANC[...]

Service Mode 13-4 5975288 BARCOGRAPHICS 8200 110497 Service Mode 13-4 5975288 BARCOGRAPHICS 8200 110497 SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS CHANGE BAUDRATE PC RESET LAMP RUNTIME LAMP RUNTINE HISTORY MORE... Select with or then <ENTER> <EXIT> to return. SERVICE PANEL ADJUSTMENTS PRESET INPUT BALANC[...]

Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-5 Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-5 Select with or then <ENTER> <EXIT> to return. SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS CHANGE BAUDRATE PC RESET LAMP RUNTIME LAMP RUNTINE HISTORY MORE... Identification To display the Identification [...]

Service Mode 13-6 5975288 BARCOGRAPHICS 8200 110497 Service Mode 13-6 5975288 BARCOGRAPHICS 8200 110497 - Baud rate : transfer speed for communication with a IBM PC (or compatible) or MAC. The baud rate of the projector must be the same as the baud rate of the connected computer. When there is a difference, consult Set up of the baud rate for commu[...]

Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-7 Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-7 R B V R B V 100 - 230 V 9 - 4 A 60 - 50 Hz RS232 OUT 0 I Th is de vic e compl ies with Part 15 of the F CC rules . Op erati on is su bject to fol lowin g two co nditi ons : (1) Thi s de vice may not c aus e harmf ul i nterf eren ce (2) Thi s de v[...]

Service Mode 13-8 5975288 BARCOGRAPHICS 8200 110497 Service Mode 13-8 5975288 BARCOGRAPHICS 8200 110497 When the strap is on leg 2-3 or no strap is mounted, the password function is enabled, when the strap is on leg 1-2, the password function is disabled. Password enabled strap on leg 2-3 Password disabled strap on leg 1-2 When the strap is on leg [...]

Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-9 Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-9 How to change the password ? Highlight Change password by pushing the control disk up or down and press ENTER to display the Change Password menu. Select with or then <ENTER> <EXIT> to return. SERVICE IDENTIFICATION CHANGE PASSWORD CH[...]

Service Mode 13-10 5975288 BARCOGRAPHICS 8200 110497 Service Mode 13-10 5975288 BARCOGRAPHICS 8200 110497 Change Projector Address Every projector requires an individual address between 0 and 255. This address can be software installed. To change that address, push the control disk up or down to highlight Change Proj. Address and press ENTER . The [...]

Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-11 Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-11 The following baud rates are available : - 9600 - 4800 - 2400 - 1200 - 600 - 300 - 150 - 75 The actual baud rate will be highlighted. To change the baud rate, push the control disk up or down and press ENTER to accept the new baud rate setting.[...]

Service Mode 13-12 5975288 BARCOGRAPHICS 8200 110497 Service Mode 13-12 5975288 BARCOGRAPHICS 8200 110497 Lamp Run Time History To get an overview of the different lamp run times, highlight Lamp Run Time History by pushing the control disk up or down and press ENTER . A listing with the lamp serial number and the corresponding run time will be disp[...]

Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-13 Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-13 Panel Adjustments Changing these settings may seriously affect the performance of the projector. All panel adjustments are factory adjusted. If not really necessary, do not touch one of these adjustments. They are useful when a new panel is ins[...]

Service Mode 13-14 5975288 BARCOGRAPHICS 8200 110497 Service Mode 13-14 5975288 BARCOGRAPHICS 8200 110497 Select with or then <ENTER> <EXIT> to return. SERVICE PANEL ADJUSTMENTS PRESET INPUT BALANCE 60Hz TRACKING I2C DIAGNOSIS MORE... PRESET INPUT BALANCE WHITE BALANCE Select with <ENTER> <EXIT> to return Adjust red with or [...]

Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-15 Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-15 60 Hz Tracking 60 Hz tracking is used to adjust the 60 Hz by sychronious signals Highlight 60 Hz Tracking by pushing the control disk up or down and press ENTER. When 60 Hz Tracking is selected in the Service Mode selection menu, the following [...]

Service Mode 13-16 5975288 BARCOGRAPHICS 8200 110497 Service Mode 13-16 5975288 BARCOGRAPHICS 8200 110497 Select with or then <ENTER> <EXIT> to return. I2C DIAGNOSIS DC A LCD DRIVER SC76013 E2H # # # LCD DRIVER SC76013 E4H # # # LCD DRIVER SC76013 ECH # # # LCD DRIVER SC76013 EEH # # # LCD DRIVER TDA8444 48H # # # LCD DRIVER TDA8444 4AH[...]

Optional Equipment 5975288 BARCOGRAPHICS 8200 110497 14-1 Optional Equipment 5975288 BARCOGRAPHICS 8200 110497 14-1 OPTIONAL EQUIPMENT IR remote receiver Hardwired RCU RCVDS05 VS05 MAGIK interface Adapter and communication cables Ceiling mount kit CM100 Transport handle Frame for dual or triple projection Multifunctional flightcase Mechanical shutt[...]

Optional Equipment 14-2 5975288 BARCOGRAPHICS 8200 110497 Optional Equipment 14-2 5975288 BARCOGRAPHICS 8200 110497 IR Receiver 800 This infra red receiver unit makes it possible to control the BARCOGRAPHICS 8200 from another room. There is a communication line with cable between the IR receiver and the projector or the RCVDS. The control informati[...]

Optional Equipment 5975288 BARCOGRAPHICS 8200 110497 14-3 Optional Equipment 5975288 BARCOGRAPHICS 8200 110497 14-3 RCVDS 800 / RCVDS 05 An optional RCVDS 05 source selector makes it possible to connect up to 10 (20 if video) sources to the projector. When RCVDS's are linked via the expansion module, even 90 inputs can be connected to the proj[...]

Optional Equipment 14-4 5975288 BARCOGRAPHICS 8200 110497 Optional Equipment 14-4 5975288 BARCOGRAPHICS 8200 110497 MAGIK Interface Multifuctional Analog Graphics Interface Kit. BARCO's MAGIK interface allows the user to connect a presentation device such as a projector or a professional monitor to any computer with analog video signal with or[...]

Optional Equipment 5975288 BARCOGRAPHICS 8200 110497 14-5 Optional Equipment 5975288 BARCOGRAPHICS 8200 110497 14-5 number R9827640; and 30 m (100ft), order number R9827570 b. Din Mini8-D9 adapter cable. - To connect a Macintosh computer to the BARCOGRAPHICS 8200. (only if the optional RS232 port is installed.) Available length : 1 m, order number [...]

Optional Equipment 14-6 5975288 BARCOGRAPHICS 8200 110497 Optional Equipment 14-6 5975288 BARCOGRAPHICS 8200 110497 Projector Transport Handle 0. 72 m 1.15 m Order number : R9829170 Projector Frame for Dual or Triple Configurations The frame is designed for use in table as well as ceiling mount configurations. The projector can be easily locked in [...]

Optional Equipment 5975288 BARCOGRAPHICS 8200 110497 14-7 Optional Equipment 5975288 BARCOGRAPHICS 8200 110497 14-7 Multifunctional flight case BARCO's multifunctional flight case is a special designed flight case for temporary installations of a BARCOGRAPHICS 8200 projector. Due to the advanced mechanical design of the flight case and the bui[...]

Optional Equipment 14-8 5975288 BARCOGRAPHICS 8200 110497 Optional Equipment 14-8 5975288 BARCOGRAPHICS 8200 110497 Mechanical Shutter BARCO's mechanical shutter can be used there where the display has to be totally black when the projector is set in pauze. This can be very useful when the projector is used together with a slide-projector. Fea[...]

Appendix A : Standard Source Set Up Files 5975288 BARCOGRAPHICS 8200 110497 A-1 Appendix A : Standard Source Set Up Files 5975288 BARCOGRAPHICS 8200 110497 A-1 NAME RESOLUTION FVERT FHOR FPIX PTOT PACT LTOT LACT Hz kHz MHz CGA 640 X 200 59,924 15,700 14,318 912 640 262 200 NTSC 675 X 240I 29,970 15,734 13,500 858 720 263 240 NTSC_2 675 X 240I 29,97[...]

Appendix A : Standard Source Set Up Files A-2 5975288 BARCOGRAPHICS 8200 110497 Appendix A : Standard Source Set Up Files A-2 5975288 BARCOGRAPHICS 8200 110497 NAME RESOLUTION FVERT FHOR FPIX PTOT PACT LTOT LACT Hz kHz MHz MAC_4 560 X 384 60,147 24,480 17,234 704 560 407 384 8514-A 1024 X 384I 43,479 35,522 44,900 1264 1024 409 384 VGA_TXT 720 X 40[...]

Appendix A : Standard Source Set Up Files 5975288 BARCOGRAPHICS 8200 110497 A-3 Appendix A : Standard Source Set Up Files 5975288 BARCOGRAPHICS 8200 110497 A-3 NAME RESOLUTION FVERT FHOR FPIX PTOT PACT LTOT LACT Hz kHz MHz XGA_75 1024 X 768 75,781 61,080 86,000 1408 1024 806 768 XGA75_GS 1024 X 768 74,534 59,701 79,284 1328 1024 801 768 XGA_72 1024[...]

Appendix A : Standard Source Set Up Files A-4 5975288 BARCOGRAPHICS 8200 110497 Appendix A : Standard Source Set Up Files A-4 5975288 BARCOGRAPHICS 8200 110497 NAME RESOLUTION FVERT FHOR FPIX PTOT PACT LTOT LACT Hz kHz MHz PC98_1 640 X 400 56,416 24,823 21,050 848 640 440 400 PC98_2 1120 X 375I 79,987 32,835 47,840 1457 1120 411 375 PC98_3 1120 X 7[...]

Appendix B : Battery Replacement in the RCU 5975288 BARCOGRAPHICS 8200 110497 B-1 Appendix B : Battery Replacement in the RCU 5975288 BARCOGRAPHICS 8200 110497 B-1 Battery replacement in the RCU. Remove the battery cover on he backside of the remote control by pushing the indicated handle a little to the bottom of the RCU. Lift up the top side of t[...]

Appendix C : Focusing the Lens 5975288 BARCOGRAPHICS 8200 110497 C-1 Appendix C : Focusing the Lens 5975288 BARCOGRAPHICS 8200 110497 C-1 Focusing the lens Lens holder Fast ener Lens Loosen the fastener ring of the lens by turning counter clockwise. Focus the image by turning the lens barrel to the left or the right. Attention : Do not turn out the[...]

Appendix D : Lens Cleaning Procedure 5975288 BARCOGRAPHICS 8200 110497 D-1 Appendix D : Lens Cleaning Procedure 5975288 BARCOGRAPHICS 8200 110497 D-1 Lens Cleaning Procedure Cleaning procedure for HD(1.5-3:1) lens and HD(3-5.3:1) lens. To minimize the possibility of damaging the optical coating or scratch- ing exposed lens surface, we have develope[...]

Appendix D : Lens Cleaning Procedure D-2 5975288 BARCOGRAPHICS 8200 110497 Appendix D : Lens Cleaning Procedure D-2 5975288 BARCOGRAPHICS 8200 110497 the lens. Wipe at a speed that is equal to the evaporation rate. This is very important to prevent streaking and spotting. Start your wiping at one side of the lens and, with successive wipes, move to[...]

Appendix E : Source Number 90 - 99 5975288 BARCOGRAPHICS 8200 110497 E-1 Appendix E : Source Number 90 - 99 5975288 BARCOGRAPHICS 8200 110497 E-1 Source numbers 90 - 99 These source numbers do not correspond to physical inputs. They can only be used when the projector is equipped with a RCVDS 05 or VS05. An additional adjustment file can be created[...]

Appendix F : Lenses 5975288 BARCOGRAPHICS 8200 110497 F-1 Appendix F : Lenses 5975288 BARCOGRAPHICS 8200 110497 F-1 Lenses This APPENDIX gives an overview of the tables and formulas for the available lenses for the BARCOGRAPHICS 8200. The next lenses are available : Name length lens diam. lens weight order number mm (inch) mm (inch) kg (lbs) HD(1.2[...]

Appendix F : Lenses F-2 5975288 BARCOGRAPHICS 8200 110497 Appendix F : Lenses F-2 5975288 BARCOGRAPHICS 8200 110497 Lens formulas to calculate the projector distance. HD(1.2:1) Metric PD=1.264 x SW + 0.126 + (0.018/SW) Inch PD= 1.264 x SW + 4.961 + (27.90/SW) HD(2.2:1) Metric PD=2.0566 x SW + 0.16 + (0.029/SW) Inch PD=2.0566 x SW + 6.299 + (44.95/S[...]

Insert card RCU 5975288 BARCOGRAPHICS 8200 110497 Insert card RCU 5975288 BARCOGRAPHICS 8200 110497 P RCU INPUT SOURCES 1 PR OJ ECTO R RCVDS 2 3 4 5 6 1 2 3 5 6 7 8 9 10 INPUT SOURCES 7 P RCU INPUT SOURCES 1 PR OJ ECTO R RCVDS 2 3 4 5 6 1 2 3 5 6 7 8 9 10 INPUT SOURCES 7 P RCU INPU T SOUR CES 1 PR OJ ECTO R RCVDS 2 3 4 5 6 1 2 3 5 6 7 8 9 10 INPUT [...]