Barco R5976426 Bedienungsanleitung

R5976426 user’s manual[...]

R5976426 Title: C YCLOPS User’s Manual ID-no.: R5976426 Date: 2001-12 main issue update chapter 1 new chapter 2 new chapter 3 new chapter 4 new chapter 5 new chapter 6 new chapter 7 new chapter 8 new chapter 9 new chapter 10 new chapter 11 new chapter 12 new chapter 13 new chapter 14 new chapter 15 new new: The corresponding chapters are new or c[...]

Trademarks Brand and product names mentioned in this manual may be trademarks, registered trademarks or copyrights of their respective holders. All brand and product names mentioned in this manual serve as comments or examples and are not to be understood as advertising for the products or their manufacturers. Copyright © 2001 by Barco Control Roo[...]

Revision sheet To:  Barco Control Rooms GmbH An der Rossweid 5 • D-76229 Karlsruhe • Germany Phone (49) (721) 6201-0 • Fax (49) (721) 6201-298 E-mail docu.de.bcd@barco.com , Web www.barcocontrolrooms.de  BARCO N.V. Projection Systems Noordlaan 5 • B-8520 Kuurne • Belgium Phone (32) (56) 36-8211 • Fax (32) (56) 36-8251 E-mail sales[...]

Contents 1 Introduction ................................................................................................................. ................. 1-1 1.1 How This Manual Is Organized .......................................................................................... 1-2 1.2 Styles And Symbols .......................................[...]

5.1.17 RS232 in / RS232 out ............................................................................................... 5-8 5.1.18 Communication port for communication with peripherals ...................................... 5-8 5.1.19 TRIG Output ...................................................................................................[...]

9 Installation Mode ............................................................................................................ ............. 9-1 9.1 Input Slots................................................................................................................ ............ 9-2 9.2 800 Peripheral........................................[...]

12.4.1 Scope of Delivery of R9831150 ............................................................................. 12-5 12.4.2 Optional Parts ......................................................................................................... 1 2-5 12.4.3 User’s Manuals ........................................................................[...]

1 Intro d u c tion This manual describes design, function, operation and maintenance of the modular rear projection system C YCLOPS of BARCO. C YCLOPS is a modular structure to house a 3-panel Poly-Silicon LCD projector. Cyclops 100S has a screen diagonal of approx. 100" (98"), up to 2 units can be piled up. In horizontal direction the nu[...]

C YCLOPS (2001-12) R5976426 1-2 1.1 How Th i s Manual Is Organized This manual is divided into fifteen chapters:  Preliminary Remarks explains the structure of the manual itself and the used typographic styles and symbols. Safety information is provided concerning the operation of systems from BARCO.  Summary provides a summary of the system [...]

C YCLOPS (2001-12) R5976426 1-3 1.2 Styles A nd Symbols The typographic styles and the symbols used in this document have the following meaning: Arial bold Labels, menus and buttons are printed in the Arial bold font. Condensed Links to both other chapters of this manual and to sites in the Internet are printed condensed . In the on-line version of[...]

C YCLOPS (2001-12) R5976426 1-4 1.3 Safety I n formation This section describes safety precautions which must be observed when installing a product from BARCO. Safetey C YCLOPS is built in accordance with the requirements of the international safety standard IEC950, UL1950 and CSA C22.2 No. 950, which are the safety standards of information technol[...]

C YCLOPS (2001-12) R5976426 1-5 B. Power cord with ANSI 73.11 plug: The wires of the power cord are colored in accordance with the following code: Green/yellow: Ground White: Neutral Black: Line (live)  Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord.  To disconnect the cord, pul[...]

C YCLOPS (2001-12) R5976426 1-6 On Servicing Do not attempt to service this device yourself, as opening or removing covers may expose you to dangerous voltage potential and risk of electric shock! Refer all projector service to a qualified BARCO service center. Adjust only those controls that are covered by the operating instructions since improper[...]

2 Abbr e v i ated Summary This chapter provides a summary of the system components and characteristics.[...]

C YCLOPS (2001-12) R5976426 2-2 2.1 Design High-quality and large-area displaying of monitor contents is becoming increasingly important in conference and presentation theaters, at exhibitions, in public areas of insurance companies, banks, hotels or transport services. Personal computers are primarily used in this context, but also UNIX workstatio[...]

3 Desig n a nd Function This chapter provides a technical description of the equipment listing the fundamental characteris- tics and functional principles. Knowledge of this section is not absolutely essential for operation.[...]

C YCLOPS (2001-12) R5976426 3-2 3.1 Compo n en ts of Cyclops C YCLOPS consists of the following components:  Mechanical structure: the metal housing incorporates the projector, mirror and screen.  Projector: The projector employed in C YCLOPS is based on most modern 3-panel poly-Silicon LCD technology. It is an independent device, including l[...]

C YCLOPS (2001-12) R5976426 3-3 Figure 3-1  Poly-Silicon TFT-LCD The LCD panels are based on Poly-Silicon technology. Poly-Silicon material consists of nu- merous small crystals leading to small circuitry. The results are a big aperture (ratio of a pixel’s shutter area to it’s total area), high speed and reliability. The panels have 1,310,72[...]

C YCLOPS (2001-12) R5976426 3-4 Diffusion Screen Diffusion screens distribute the projected light evenly over a wide horizontal and vertical viewing area. The reflection value (gain) is 1.They are appreciated for their versatility. It is a perfect choice for any application which requires a wide viewing angle or where ambient light conditions are c[...]

4 Loca t i o n and Functions of Control This chapter provides an overview about the controls of Cyclops.[...]

C YCLOPS (2001-12) R5976426 4-2 4.1 Access Figure 4-1 All important parts can be accessed from the front 1 control unit 2 keypad 3 lamp module 4 filter pad 4.2 Contro l U nit 4.2.1 Power, s o u rce and communication connections [1] 1 Power switch 1 = on, 0 = off 2 Power input autoranging from 100VAC to 240VAC 3 Video input 1 cinch or 1 BNC connecto[...]

C YCLOPS (2001-12) R5976426 4-3 12 IR-Acknowledged IR-Received IR-Signals are recognized IR-Signals are received but not recognized by the pro- jector 13 Projector mode indication indicates the status of the projector Light off: power switch is not pressed Red light: power switch is pressed, projector in standby mode Green light: projector in opera[...]

C YCLOPS (2001-12) R5976426 4-4 4.3.2 Remote c on trol This remote control unit ( RCU ) includes a battery powered infrared (IR) transmitter that allows the user to control the projector remotely. Figure 4-3 IR Remote Control Unit (RCU) This remote control is used for source selection, control, adaptation and set up. It includes auto- matic storing[...]

C YCLOPS (2001-12) R5976426 4-5 4.3.3 Termino l o gy of keypad and RCU controls 1 Function keys have no function for this projector 2 ADJ ADJUST key, to enter or exit the adjustment mode. 3 Address key (recessed key), to enter the address of the projector (between 0 and 9). Press the recessed address key with a pencil, followed by press- ing one di[...]

C YCLOPS (2001-12) R5976426 5-1 5 Conn e c t ions This chapter explains the various interfaces of C YCLOPS .[...]

C YCLOPS (2001-12) R5976426 5-2 5.1 Power c on nection 5.1.1 AC Pow e r ( mains) cord connection I 0 RC RS 232 IN RS 232 OUT Comm. Port IEE 1394 TRIG MOUSE VIDEO S-VIDEO SDI SDO R G B H/C V COMPUTER MONITOR AUDIO IN AUDIO IN AUDIO IN AUDIO OUT AB C 12 34 5 6  Use the supplied power cord to connect your projector to the wall outlet.  Plug the [...]

C YCLOPS (2001-12) R5976426 5-3 5.1.6 Switchi n g to Stand-by When the projector is running and you want to go to stand-by:  Press the STANDBY key for 2 seconds until the message 'Saving data, please wai t' is displayed. Do not press any longer on the standby key otherwise the projector will restart. 5.1.7 Switchi n g Off To switch off[...]

C YCLOPS (2001-12) R5976426 5-4 5.1.9 Set up o f t he input selection:  Press ENTER to start up the adjustment mode.  Press the cursor key up or down to select 'Installation' .  Press ENTER to display the Installation menu .  Press the cursor key up or down to select 'Input Slots' .  Press ENTER to display the Inp[...]

C YCLOPS (2001-12) R5976426 5-5 Configuration of the 5-cable input The configuration has to be done on the 'Input slot' menu. To change the signal format:  Press ADJUST or ENTER to start up the Adjustment mode.  Push the cursor key up or down to select Installation  Press ENTER .  Press the cursor key up or down to select &apo[...]

C YCLOPS (2001-12) R5976426 5-6 5.1.11 Compu t e r input/Monitor output  Connect the output of the graphical card of the computer to the computer input of the projector (connection < 60 cm) or insert an interface between the output of the computer and the input of the projector.  Connect the monitor of the computer to the monitor output of[...]

C YCLOPS (2001-12) R5976426 5-7 5.1.13 S-Video I n put Input signal: Separate Y-luma/C-chroma signals for higher quality playback of Super VHS-signals. Pin configuration mini DIN plug: 1 ground luminance 2 ground chrominance 3 luminance 1.0Vpp ± 3 dB 4 chrominance 282 mVpp ± 3 dB Slot 4 selection: Press the digit button 4 on the RCU or the local [...]

C YCLOPS (2001-12) R5976426 5-8 5.1.16 Commu n i ca tion Connections The following communication connections are available:  RS232 in / RS232 out.  Comm port for communication with peripheral (switchable between PPM and RC5)  RC for remote cable connection with the RCU.  MOUSE to control a PC with the projector remote control.  TRIG:[...]

C YCLOPS (2001-12) R5976426 5-9 5.1.19 TRIG O u t p ut 5 V output voltage to trigger an external device (max. 10mA). This voltage is available when the projector is on. 5.1.20 MOUSE Mouse output to be connected to the mouse input of a computer. With the Executive Remote Control (see 12.4.2 Optional Parts) , the computer can now be controlled via th[...]

C YCLOPS (2001-12) R5976426 6-10 6 Cont r o l l ing The projector can be controlled with  the RCU  the hardwired RCU (cable is not included)  the local keypad Controlling the projector with the RCU and the hardwired RCU is equal.[...]

C YCLOPS (2001-12) R5976426 6-11 6.1 RCU us e d in a hardwired confi guration Connections:  Plug one end of the remote cable in the connector on the bottom of the RCU  Plug the second side in the connector in the front panel of the projector labelled 'RC' . 6.2 How to u se the RCU? Point the front of the RCU directly at the screen. [...]

C YCLOPS (2001-12) R5976426 6-12 6.3.4 Picture C o n trols with Direct Access. When an image control is pressed, a text box with a bar scale, icon and function name of the con- trol, e.g. 'brightness...' appears on the screen (only if TEXT is ON ). The length of the bar scale and the value of the numeric indication indicate the current me[...]

C YCLOPS (2001-12) R5976426 6-13 6.3.5 Sound c o n tr ols with direct access When a sound control is pressed, a text box with a bar scale, icon and function name of the con- trol, e.g. 'volume ...' appears on the screen (only if TEXT is ON ). The length of the bar scale indi- cates the current memorized setting for this source. The bar sc[...]

C YCLOPS (2001-12) R5976426 7-1 7 S t art U p of the Adjustment Mode All source parameters, picture and audio tuning, and geometry are made while in the 'Adjustment Mode' . Press the ADJUST or ENTER key to enter the 'Adjustment mode' .[...]

C YCLOPS (2001-12) R5976426 7-2 7.1 Adjust m en t mode You are now in the 'Adjustment Mode' .  The cursor key ( RCU ) or '+ or '-' keys (local keypad ) are used to make menu selections and also for adjustments.  The ENTER and EXIT keys are used to move forward and backward through the menu structure.  The ADJUST ke[...]

C YCLOPS (2001-12) R5976426 8-1 8 Rand o m Access Adjustment Mode To start up the Random Access Adjustment Mode:  push the cursor key up or down to highlight 'Random Access' and then press ENTER The Random Access menu comprises four submenus each of which gives access to the various settings and commands related to the submenu: main me[...]

C YCLOPS (2001-12) R5976426 8-2 8.1 File Se r vi ce Before using a new source, a correct file has to be installed. The projector's memory contains a list of files corresponding to the most used sources. When the new source corresponds with one of these files, the file can be loaded and saved for future use. When there is a little difference, t[...]

C YCLOPS (2001-12) R5976426 8-3 8.1.1 Load Fi l e  Push the cursor key up or down to highlight 'Load'.  Press ENTER to select.  The Load menu displays the corresponding files depending on the installed filter. This filter can be Fit or All. All : all files that can be loaded will be displayed. Fit : only the best fitting files wi[...]

C YCLOPS (2001-12) R5976426 8-4 8.1.2 Edit File The Edit file menu makes it possible to change the settings of the file according to the real settings of the connected source. Consult the source specification before entering the data. To start up the EDIT menu :  Push the cursor key up or down to highlight 'Edit' .  Press ENTER to s[...]

C YCLOPS (2001-12) R5976426 8-5 How to find the correct values for the displayed item? During the installation of a file with LOAD , the horizontal period, the total number of vertical lines and the interlaced mode are automatically measured and filled in the menu table. These values will be available when starting up the EDIT procedure of an activ[...]

C YCLOPS (2001-12) R5976426 8-6  Field Select: Default [ both ] The field select is only used for interlaced images. One frame of an interlaced image contains two fields, an even and an odd field. The choice exists to project [ both ] fields on the screen or only the [ even ] or [ odd ] field. This can be useful for 3D projection. Use the ENTER [...]

C YCLOPS (2001-12) R5976426 8-7 8.1.4 Copy To copy a selected file into a new file:  Push the cursor key up or down to highlight 'Copy' .  Press ENTER . The Copy selection menu will be displayed.  Push the cursor key up or down to select a file name.  Press ENTER to select. The Copy menu will be displayed with the selected fil[...]

C YCLOPS (2001-12) R5976426 8-8 8.1.6 File Opt i o n s  Push the cursor key up or down to highlight 'File Options' .  Press ENTER . The option selection menu will be displayed. File Sort  Press ENTER to toggle between [ name ] and [ index ] [ name ]: The files in the file list will be sorted on the file name. [ index ]: The files[...]

C YCLOPS (2001-12) R5976426 8-9 8.2.1 Color T e m p erature  Push the cursor key up or down to highlight 'Color Temperature' .  Press ENTER to select.  The color temperature selection menu will be displayed. The following selections are are possible : name related temperature Projector white Broadcast 3200 K Film 5400 K Video 650[...]

C YCLOPS (2001-12) R5976426 8-10 8.2.3 Color D e p t h Increases color saturation of dark colors To change the color depth value:  Push the cursor key up or down to highlight 'Color Depth' .  Press ENTER to select.  Change the value by pushing the cursor key left or right until the desired color saturation is reached: Adjustment [...]

C YCLOPS (2001-12) R5976426 8-11 8.2.7 Mute To stop the sound reproduction.  Push the cursor key up or down to highlight 'Mute' .  Press ENTER to toggle between [ on ] or [ off ] 8.2.8 Fade Determine where the sound signals will be reproduced, internally or externally. Adjust the fade as follows:  Push the cursor key up or down t[...]

C YCLOPS (2001-12) R5976426 8-12 8.3 Geome t ry To start up the Geometry functions:  Push the cursor key up or down to highlight 'Geometry' .  Press ENTER to select.  The geometry menu will be displayed. The following adjustments are possible: horizontal and vertical image shift. to shift the image in a horizontal or vertical dir[...]

C YCLOPS (2001-12) R5976426 8-13 8.3.2 Size The size can be adjusted in a vertical or horizontal way. When adjusting the vertical size, the upper side of the image is fixed (table and ceiling mounted configurations) and only the lower side can be moved to its exact position. When adjusting the horizontal size, the left side of the image is fixed an[...]

C YCLOPS (2001-12) R5976426 8-14 8.3.6 Options To change the geometry options:  Push the cursor key up or down to highlight 'Options' .  Press ENTER to display the Geometry options menu The next question will be asked by the projector : 'Use the same side keystone correction for all files ? [ YES ] or [ NO ]. [ YES ]: the same [...]

C YCLOPS (2001-12) R5976426 9-1 9 Inst a l l at ion Mode To start up the Installation Mode , push the cursor key up or down to highlight 'Installation Mode' and then press ENTER . The following items can be selected in the Installation mode : Input slots to set up the input priority 800 Peripheral to select the type of output module used [...]

C YCLOPS (2001-12) R5976426 9-2 9.1 Input S l ot s The input configuration of the variable inputs is shown in the input slots menu . To view or to change the input configuration:  Push the cursor key up or down to highlight 'Input Slots' .  Press ENTER to select. The internal system will scan the input slots and displays the result [...]

C YCLOPS (2001-12) R5976426 9-3 9.2 800 Pe r ip her al Output module selection When a RCVDS05 is connected to the projector, the type of output module of this RCVDS05 has to be defined in the 800 peripheral menu . The type of output module can be:  standard output module or  5 cable output module. To define the output module:  Push the cur[...]

C YCLOPS (2001-12) R5976426 9-4 9.5 Interna l P atterns The projector is equipped with different internal patterns which can be used for measurement pur- poses. To select an internal pattern, handle as follow:  Push the cursor key up or down to highlight 'Internal Patterns' .  Press ENTER to select.  The internal pattern menu wil[...]

C YCLOPS (2001-12) R5976426 9-5 9.6 Lens A d ju stments All lens adjustments are motorized and can be adjusted with the RCU. The following items can ce adjusted Zoom/Focus Shift When the Selection key is pressed, the zoom/focus/shift menu will be displayed immediately. To focus the image:  Push the up or down key to zoom and left or right key to[...]

C YCLOPS (2001-12) R5976426 9-6 9.8 Interna l P atterns The projector is equipped with different internal patterns which can be used for measurement pur- poses. To select an internal pattern, handle as follow:  Push the cursor key up or down to highlight 'Internal Patterns' .  Press ENTER to select.  The internal pattern menu wil[...]

C YCLOPS (2001-12) R5976426 10-1 10 Servi c e Mode To start up the Service Mode :  push the cursor key up or down to highlight 'Service'  press ENTER . Some items in the Service mode are password protected (when the password function is active). Enter the password to continue. All other password protected items are now available if [...]

C YCLOPS (2001-12) R5976426 10-2 10.1 Identifi c at ion To display the Identification screen :  Push the cursor key up or down to highlight 'Identification' .  Press ENTER to display the Identification screen. The Identification screen gives an overview of: type of projector Barcoreality Helios projector address to change the addres[...]

C YCLOPS (2001-12) R5976426 10-3 10.3 Chang e L anguage To change the language of the control software:  Push the cursor key up or down to highlight 'Change Language' .  Press ENTER to display the Change Language menu .  Push the cursor key up or down to highlight the desired language.  Press ENTER to change the language. (Ava[...]

C YCLOPS (2001-12) R5976426 10-4 10.5 Chang e B audrate PC The communication speed between projector and computer, e.g. PC or MAC, has 8 possible speeds. The baud rate speed can be software set. Handle as follows:  Push the cursor key up or down to highlight 'Change Baudrate PC' .  Press ENTER to display the Change Baudrate PC menu [...]

C YCLOPS (2001-12) R5976426 10-5 10.8 BARCO lo go The BARCO logo can be added to the image, in overlay or on a background, on any place on the screen. To add the BARCO logo or to change a setting in the BARCO logo menu :  Push the cursor key up or down to highlight 'BARCO logo' .  Press ENTER to display the BARCO logo menu . The act[...]

C YCLOPS (2001-12) R5976426 10-6 10.10 Uniform i ty Changing these settings may seriously affect the performance of the projector Push the cursor key up or down to highlight 'Uniformity' . When Uniformity is selected in the Service Mode selection menu , the following warning will be displayed : Uniformity is reserved to qualified service [...]

11 Main t e n ance and Servicing C YCLOPS requires very little maintenance and servicing. Maintenance operations are nevertheless necessary at regular intervals to guarantee good operational performance. This chapter describes maintenance and servicing of C YCLOPS . Only authorized personnel should carry out other maintenance work not explicitly me[...]

C YCLOPS (2001-12) R5976426 11-2 11.1 Genera l For safety reasons, all servicing, including replacement of the lamp, is restricted to authorized per- sonnel only! Only authorized personnel should carry out maintenance work! Never open the access cover without first disconnecting the power supply cord! Measurements and tests with the opened device m[...]

12 T ech n i c al Data This chapter provides tabular overviews about the technical details of C YCLOPS .[...]

C YCLOPS (2001-12) R5976426 12-2 12.1 Genera l Data characteristic specification dimensions screen width screen height total depth 98” diagonal 1943.5 mm | 76.5 in. 1544 mm | 61.2 in. 1487 mm | 58.5 in. weight total weight (incl. projector, mirror, screen) weight of cladding 166 kg | 366 lbs 25 kg | 55.11 lbs operating conditions Number of module[...]

C YCLOPS (2001-12) R5976426 12-3 12.3 Techni c al Data Of Electrical System characteristic specification AC power supply 95VAC .... 230VAC ± 10% mains frequency 50....60 Hz power consumption Max. 300 W with 230VAC Table 12-3 12.3.1 Slot 1: 5 c a ble input, 5×BNC 1 2 1 Signal 2 Shield Connector name R G B H V Input signal RGBHV R G B H V RGBS R G [...]

C YCLOPS (2001-12) R5976426 12-4 12.3.3 Slot 3: V i d e o Input 1 2 1 1×BNC or cinch 1.0Vpp ± 3 dB, no loop through Signal 2 Shield Table 12-6 12.3.4 Slot 4: S - V i deo Input 3 1 2 4 1 ground luminance 3 luminance 1.0Vpp ± 3 dB 2 ground chrominance 4 chrominance 282 mVpp ± 3 dB Table 12-7 12.3.5 Slot 5: S e r i al digital Input / Serial digita[...]

C YCLOPS (2001-12) R5976426 12-5 12.4 Parts L i st 12.4.1 Scope o f D elivery of R9831150 order No. designation R9831150 Cyclops, modular rear projection unit, incl. projector and double element screen (fresnel-lenticular) (SXGA resolu- tion), without cladding R9831155 Cyclops, modular rear projection unit, incl. projector and diffusion screen (fre[...]

13 T roub l e s hooting When faults occur with C YCLOPS which are not described below please contact BARCO.[...]

C YCLOPS (2001-12) R5976426 13-2 13.1 Faults Faults cause/steps no display: lamp not ignited and fan of the illumination unit not running The equipment is not connected to power sup- ply. It must be supplied with suitable voltage (see 12.3 Technical Data Of Electrical System )! Power switch is off. Switch on power switch. See 5.1.3 Switching on dis[...]

C YCLOPS (2001-12) R5976426 13-3 13.2 Contac t 13.2.1 Hot Lin e Feel free to contact us if you have any further questions!  Barco Control Rooms GmbH An der Rossweid 5 • D-76229 Karlsruhe • Germany Phone (49) (721) 6201-0 • Fa× (49) (721) 6201-298 E-mail info.de.bcd.@barco.com , Web www.barcocontrolrooms.de  BARCO N.V. Projection System[...]

14 Appe n d i x A: S t andard Source Set Up Files Name: name of file, contains the settings Resolution: image resolution, when followed by ...I means interlaced. FVERT/Hz: vertical frame frequency of the source FHOR/kHz: horizontal frequency of the source. FPIX/MHz: pixel frequency PTOT: total pixels on one horizontal line PACT: active pixels on on[...]

C YCLOPS (2001-12) R5976426 14-2 name resolution Fvert/Hz Fhor/kHz Fpix/MHz ptot pact ltot lact MAC_6 832 × 624 74,546 49,722 57,280 1152 832 667 624 MAC_7 1024 × 768 74,907 60,150 80,000 1330 1024 803 768 MAC_LC 640 × 480 66,619 34,975 31,338 896 640 525 480 MAC_POR 640 × 870 74,996 68,846 57,280 832 640 918 870 MUSE 1172 × 518i 30,000 33,750[...]

C YCLOPS (2001-12) R5976426 14-3 name resolution Fvert/Hz Fhor/kHz Fpix/MHz ptot pact ltot lact SVGA_75 800 × 600 75,00 46,875 49,500 1056 800 625 600 SVGA_85 800 × 600 85,061 53,674 56,250 1048 800 631 600 SVGA_100 800 × 600 100,276 62,973 66,500 1056 800 631 600 VGA_72V 640 × 480 72,800 37,856 31,496 832 640 520 480 VGA_75 640 × 480 75,000 3[...]

C YCLOPS (2001-12) R5976426 15-4 15 Appe n d i x B: Source Numbers 81 - 86 And 91 - 96 15.1 Project o r without any 800 peripheral connected. The source numbers 81 - 86 and 91 - 96 do not correspond to physical inputs. An additional ad- justment file can be created for these source numbers. This file can contain different settings. The relationship[...]

C YCLOPS (2001-12) R5976426 15-5 source input source number file 1 1 A 1 91 A’ 2 2 B 2 92 B’ 3 3 C 3 93 C’ . . . 9 9 I 9 99 I’ 15.2.2 Source n u mb ers 81 - 86 Only valid if no input module is connected to slot 81 - 86 of a RCVDS05. The source numbers 81 - 86 correspond to the physical inputs 1 - 6 of the projector. e.g. When slot 1 of the [...]